summaryrefslogtreecommitdiff
path: root/include/asm-generic
AgeCommit message (Collapse)Author
2021-02-21Merge tag 'sched-core-2021-02-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Ingo Molnar: "Core scheduler updates: - Add CONFIG_PREEMPT_DYNAMIC: this in its current form adds the preempt=none/voluntary/full boot options (default: full), to allow distros to build a PREEMPT kernel but fall back to close to PREEMPT_VOLUNTARY (or PREEMPT_NONE) runtime scheduling behavior via a boot time selection. There's also the /debug/sched_debug switch to do this runtime. This feature is implemented via runtime patching (a new variant of static calls). The scope of the runtime patching can be best reviewed by looking at the sched_dynamic_update() function in kernel/sched/core.c. ( Note that the dynamic none/voluntary mode isn't 100% identical, for example preempt-RCU is available in all cases, plus the preempt count is maintained in all models, which has runtime overhead even with the code patching. ) The PREEMPT_VOLUNTARY/PREEMPT_NONE models, used by the vast majority of distributions, are supposed to be unaffected. - Fix ignored rescheduling after rcu_eqs_enter(). This is a bug that was found via rcutorture triggering a hang. The bug is that rcu_idle_enter() may wake up a NOCB kthread, but this happens after the last generic need_resched() check. Some cpuidle drivers fix it by chance but many others don't. In true 2020 fashion the original bug fix has grown into a 5-patch scheduler/RCU fix series plus another 16 RCU patches to address the underlying issue of missed preemption events. These are the initial fixes that should fix current incarnations of the bug. - Clean up rbtree usage in the scheduler, by providing & using the following consistent set of rbtree APIs: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two - Improve the SMP/NUMA load-balancer: scan for an idle sibling in a single pass. This is a 4-commit series where each commit improves one aspect of the idle sibling scan logic. - Improve the cpufreq cooling driver by getting the effective CPU utilization metrics from the scheduler - Improve the fair scheduler's active load-balancing logic by reducing the number of active LB attempts & lengthen the load-balancing interval. This improves stress-ng mmapfork performance. - Fix CFS's estimated utilization (util_est) calculation bug that can result in too high utilization values Misc updates & fixes: - Fix the HRTICK reprogramming & optimization feature - Fix SCHED_SOFTIRQ raising race & warning in the CPU offlining code - Reduce dl_add_task_root_domain() overhead - Fix uprobes refcount bug - Process pending softirqs in flush_smp_call_function_from_idle() - Clean up task priority related defines, remove *USER_*PRIO and USER_PRIO() - Simplify the sched_init_numa() deduplication sort - Documentation updates - Fix EAS bug in update_misfit_status(), which degraded the quality of energy-balancing - Smaller cleanups" * tag 'sched-core-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) sched,x86: Allow !PREEMPT_DYNAMIC entry/kvm: Explicitly flush pending rcuog wakeup before last rescheduling point entry: Explicitly flush pending rcuog wakeup before last rescheduling point rcu/nocb: Trigger self-IPI on late deferred wake up before user resume rcu/nocb: Perform deferred wake up before last idle's need_resched() check rcu: Pull deferred rcuog wake up to rcu_eqs_enter() callers sched/features: Distinguish between NORMAL and DEADLINE hrtick sched/features: Fix hrtick reprogramming sched/deadline: Reduce rq lock contention in dl_add_task_root_domain() uprobes: (Re)add missing get_uprobe() in __find_uprobe() smp: Process pending softirqs in flush_smp_call_function_from_idle() sched: Harden PREEMPT_DYNAMIC static_call: Allow module use without exposing static_call_key sched: Add /debug/sched_preempt preempt/dynamic: Support dynamic preempt with preempt= boot option preempt/dynamic: Provide irqentry_exit_cond_resched() static call preempt/dynamic: Provide preempt_schedule[_notrace]() static calls preempt/dynamic: Provide cond_resched() and might_resched() static calls preempt: Introduce CONFIG_PREEMPT_DYNAMIC static_call: Provide DEFINE_STATIC_CALL_RET0() ...
2021-02-21Merge tag 'core-mm-2021-02-17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull tlb gather updates from Ingo Molnar: "Theses fix MM (soft-)dirty bit management in the procfs code & clean up the TLB gather API" * tag 'core-mm-2021-02-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Use tlb_gather_mmu_fullmm() when freeing LDT page-tables tlb: arch: Remove empty __tlb_remove_tlb_entry() stubs tlb: mmu_gather: Remove start/end arguments from tlb_gather_mmu() tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm() tlb: mmu_gather: Remove unused start/end arguments from tlb_finish_mmu() mm: proc: Invalidate TLB after clearing soft-dirty page state
2021-02-20Merge tag 'pm-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new power capping facility allowing aggregate power constraints to be applied to sets of devices in a distributed manner, add a new CPU ID to the RAPL power capping driver and improve it, drop a cpufreq driver belonging to a platform that is not supported any more, drop two redundant cpufreq driver flags, update cpufreq drivers (intel_pstate, brcmstb-avs, qcom-hw), update the operating performance points (OPP) framework (code cleanups, new helpers, devfreq-related modifications), clean up devfreq, extend the PM clock layer, update the cpupower utility and make assorted janitorial changes. Specifics: - Add new power capping facility called DTPM (Dynamic Thermal Power Management), based on the existing power capping framework, to allow aggregate power constraints to be applied to sets of devices in a distributed manner, along with a CPU backend driver based on the Energy Model (Daniel Lezcano, Dan Carpenter, Colin Ian King). - Add AlderLake Mobile support to the Intel RAPL power capping driver and make it use the topology interface when laying out the system topology (Zhang Rui, Yunfeng Ye). - Drop the cpufreq tango driver belonging to a platform that is not supported any more (Arnd Bergmann). - Drop the redundant CPUFREQ_STICKY and CPUFREQ_PM_NO_WARN cpufreq driver flags (Viresh Kumar). - Update cpufreq drivers: * Fix max CPU frequency discovery in the intel_pstate driver and make janitorial changes in it (Chen Yu, Rafael Wysocki, Nigel Christian). * Fix resource leaks in the brcmstb-avs-cpufreq driver (Christophe JAILLET). * Make the tegra20 driver use the resource-managed API (Dmitry Osipenko). * Enable boost support in the qcom-hw driver (Shawn Guo). - Update the operating performance points (OPP) framework: * Clean up the OPP core (Dmitry Osipenko, Viresh Kumar). * Extend the OPP API by adding new helpers to it (Dmitry Osipenko, Viresh Kumar). * Allow required OPPs to be used for devfreq devices and update the devfreq governor code accordingly (Saravana Kannan). * Prepare the framework for introducing new dev_pm_opp_set_opp() helper (Viresh Kumar). * Drop dev_pm_opp_set_bw() and update related drivers (Viresh Kumar). * Allow lazy linking of required-OPPs (Viresh Kumar). - Simplify and clean up devfreq somewhat (Lukasz Luba, Yang Li, Pierre Kuo). - Update the generic power domains (genpd) framework: * Use device's next wakeup to determine domain idle state (Lina Iyer). * Improve initialization and debug (Dmitry Osipenko). * Simplify computations (Abaci Team). - Make janitorial changes in the core code handling system sleep and PM-runtime (Bhaskar Chowdhury, Bjorn Helgaas, Rikard Falkeborn, Zqiang). - Update the MAINTAINERS entry for the exynos cpuidle driver and drop DEBUG definition from intel_idle (Krzysztof Kozlowski, Tom Rix). - Extend the PM clock layer to cover clocks that must sleep (Nicolas Pitre). - Update the cpupower utility: * Update cpupower command, add support for AMD family 0x19 and clean up the code to remove many of the family checks to make future family updates easier (Nathan Fontenot, Robert Richter). * Add Makefile dependencies for install targets to allow building cpupower in parallel rather than serially (Ivan Babrou). - Make janitorial changes in power management Kconfig (Lukasz Luba)" * tag 'pm-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) MAINTAINERS: cpuidle: exynos: include header in file pattern powercap: intel_rapl: Use topology interface in rapl_init_domains() powercap: intel_rapl: Use topology interface in rapl_add_package() PM: sleep: Constify static struct attribute_group PM: Kconfig: remove unneeded "default n" options PM: EM: update Kconfig description and drop "default n" option cpufreq: Remove unused flag CPUFREQ_PM_NO_WARN cpufreq: Remove CPUFREQ_STICKY flag PM / devfreq: Add required OPPs support to passive governor PM / devfreq: Cache OPP table reference in devfreq OPP: Add function to look up required OPP's for a given OPP PM / devfreq: rk3399_dmc: Remove unneeded semicolon opp: Replace ENOTSUPP with EOPNOTSUPP opp: Fix "foo * bar" should be "foo *bar" opp: Don't ignore clk_get() errors other than -ENOENT opp: Update bandwidth requirements based on scaling up/down opp: Allow lazy-linking of required-opps opp: Remove dev_pm_opp_set_bw() devfreq: tegra30: Migrate to dev_pm_opp_set_opp() drm: msm: Migrate to dev_pm_opp_set_opp() ...
2021-02-20Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-17static_call: Allow module use without exposing static_call_keyJosh Poimboeuf
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lkml.kernel.org/r/20210127231837.ifddpn7rhwdaepiu@treble
2021-02-15Merge branches 'powercap' and 'pm-misc'Rafael J. Wysocki
* powercap: powercap: intel_rapl: Use topology interface in rapl_init_domains() powercap: intel_rapl: Use topology interface in rapl_add_package() powercap/intel_rapl: add support for AlderLake Mobile powercap/drivers/dtpm: Fix size of object being allocated powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check powercap/drivers/dtpm: Fix some missing unlock bugs powercap/drivers/dtpm: Fix a double shift bug powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols powercap/drivers/dtpm: Add CPU energy model based support powercap/drivers/dtpm: Add API for dynamic thermal power management Documentation/powercap/dtpm: Add documentation for dtpm units: Add Watt units * pm-misc: PM: Kconfig: remove unneeded "default n" options PM: EM: update Kconfig description and drop "default n" option
2021-02-09firmware_loader: align .builtin_fw to 8Fangrui Song
arm64 references the start address of .builtin_fw (__start_builtin_fw) with a pair of R_AARCH64_ADR_PREL_PG_HI21/R_AARCH64_LDST64_ABS_LO12_NC relocations. The compiler is allowed to emit the R_AARCH64_LDST64_ABS_LO12_NC relocation because struct builtin_fw in include/linux/firmware.h is 8-byte aligned. The R_AARCH64_LDST64_ABS_LO12_NC relocation requires the address to be a multiple of 8, which may not be the case if .builtin_fw is empty. Unconditionally align .builtin_fw to fix the linker error. 32-bit architectures could use ALIGN(4) but that would add unnecessary complexity, so just use ALIGN(8). Link: https://lkml.kernel.org/r/20201208054646.2913063-1-maskray@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/1204 Fixes: 5658c76 ("firmware: allow firmware files to be built into kernel image") Signed-off-by: Fangrui Song <maskray@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Douglas Anderson <dianders@chromium.org> Acked-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-29tlb: mmu_gather: Introduce tlb_gather_mmu_fullmm()Will Deacon
Passing the range '0, -1' to tlb_gather_mmu() sets the 'fullmm' flag, which indicates that the mm_struct being operated on is going away. In this case, some architectures (such as arm64) can elide TLB invalidation by ensuring that the TLB tag (ASID) associated with this mm is not immediately reclaimed. Although this behaviour is documented in asm-generic/tlb.h, it's subtle and easily missed. Introduce tlb_gather_mmu_fullmm() to make it clearer that this is for the entire mm and WARN() if tlb_gather_mmu() is called with the 'fullmm' address range. Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Yu Zhao <yuzhao@google.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20210127235347.1402-4-will@kernel.org
2021-01-20c6x: remove architectureArnd Bergmann
The c6x architecture was added to the kernel in 2011 at a time when running Linux on DSPs was widely seen as the logical evolution. It appears the trend has gone back to running Linux on Arm based SoCs with DSP, using a better supported software ecosystem, and having better real-time behavior for the DSP code. An example of this is TI's own Keystone2 platform. The upstream kernel port appears to no longer have any users. Mark Salter remained avaialable to review patches, but mentioned that he no longer has access to working hardware himself. Without any users, it's best to just remove the code completely to reduce the work for cross-architecture code changes. Many thanks to Mark for maintaining the code for the past ten years. Link: https://lore.kernel.org/lkml/41dc7795afda9f776d8cd0d3075f776cf586e97c.camel@redhat.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-13arm64: make atomic helpers __always_inlineArnd Bergmann
With UBSAN enabled and building with clang, there are occasionally warnings like WARNING: modpost: vmlinux.o(.text+0xc533ec): Section mismatch in reference from the function arch_atomic64_or() to the variable .init.data:numa_nodes_parsed The function arch_atomic64_or() references the variable __initdata numa_nodes_parsed. This is often because arch_atomic64_or lacks a __initdata annotation or the annotation of numa_nodes_parsed is wrong. for functions that end up not being inlined as intended but operating on __initdata variables. Mark these as __always_inline, along with the corresponding asm-generic wrappers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20210108092024.4034860-1-arnd@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-12-29local64.h: make <asm/local64.h> mandatoryRandy Dunlap
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and remove all arch/*/include/asm/local64.h arch-specific files since they only #include <asm-generic/local64.h>. This fixes build errors on arch/c6x/ and arch/nios2/ for block/blk-iocost.c. Build-tested on 21 of 25 arch-es. (tools problems on the others) Yes, we could even rename <asm-generic/local64.h> to <linux/local64.h> and change all #includes to use <linux/local64.h> instead. Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Suggested-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-22powercap/drivers/dtpm: Add API for dynamic thermal power managementDaniel Lezcano
On the embedded world, the complexity of the SoC leads to an increasing number of hotspots which need to be monitored and mitigated as a whole in order to prevent the temperature to go above the normative and legally stated 'skin temperature'. Another aspect is to sustain the performance for a given power budget, for example virtual reality where the user can feel dizziness if the GPU performance is capped while a big CPU is processing something else. Or reduce the battery charging because the dissipated power is too high compared with the power consumed by other devices. The userspace is the most adequate place to dynamically act on the different devices by limiting their power given an application profile: it has the knowledge of the platform. These userspace daemons are in charge of the Dynamic Thermal Power Management (DTPM). Nowadays, the dtpm daemons are abusing the thermal framework as they act on the cooling device state to force a specific and arbitrary state without taking care of the governor decisions. Given the closed loop of some governors that can confuse the logic or directly enter in a decision conflict. As the number of cooling device support is limited today to the CPU and the GPU, the dtpm daemons have little control on the power dissipation of the system. The out of tree solutions are hacking around here and there in the drivers, in the frameworks to have control on the devices. The common solution is to declare them as cooling devices. There is no unification of the power limitation unit, opaque states are used. This patch provides a way to create a hierarchy of constraints using the powercap framework. The devices which are registered as power limit-able devices are represented in this hierarchy as a tree. They are linked together with intermediate nodes which are just there to propagate the constraint to the children. The leaves of the tree are the real devices, the intermediate nodes are virtual, aggregating the children constraints and power characteristics. Each node have a weight on a 2^10 basis, in order to reflect the percentage of power distribution of the children's node. This percentage is used to dispatch the power limit to the children. The weight is computed against the max power of the siblings. This simple approach allows to do a fair distribution of the power limit. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-12-18Merge tag 'riscv-for-linus-5.11-mw0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "We have a handful of new kernel features for 5.11: - Support for the contiguous memory allocator. - Support for IRQ Time Accounting - Support for stack tracing - Support for strict /dev/mem - Support for kernel section protection I'm being a bit conservative on the cutoff for this round due to the timing, so this is all the new development I'm going to take for this cycle (even if some of it probably normally would have been OK). There are, however, some fixes on the list that I will likely be sending along either later this week or early next week. There is one issue in here: one of my test configurations (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the .text.init alignment patch. With any luck we'll sort out the issue, but given how many bugs get fixed all over the place and how unrelated those features seem my guess is that we're just running into something that's been lurking for a while and has already been fixed in the newer QEMU (though I wouldn't be surprised if it's one of these implicit assumptions we have in the boot flow). If it was hardware I'd be strongly inclined to look more closely, but given that users can upgrade their simulators I'm less worried about it" * tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed() riscv: Fixed kernel test robot warning riscv: kernel: Drop unused clean rule riscv: provide memmove implementation RISC-V: Move dynamic relocation section under __init RISC-V: Protect all kernel sections including init early RISC-V: Align the .init.text section RISC-V: Initialize SBI early riscv: Enable ARCH_STACKWALK riscv: Make stack walk callback consistent with generic code riscv: Cleanup stacktrace riscv: Add HAVE_IRQ_TIME_ACCOUNTING riscv: Enable CMA support riscv: Ignore Image.* and loader.bin riscv: Clean up boot dir riscv: Fix compressed Image formats build RISC-V: Add kernel image sections to the resource tree
2020-12-15Merge tag 'asm-generic-mmu-context-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic mmu-context cleanup from Arnd Bergmann: "This is a cleanup series from Nicholas Piggin, preparing for later changes. The asm/mmu_context.h header are generalized and common code moved to asm-gneneric/mmu_context.h. This saves a bit of code and makes it easier to change in the future" * tag 'asm-generic-mmu-context-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (25 commits) h8300: Fix generic mmu_context build m68k: mmu_context: Fix Sun-3 build xtensa: use asm-generic/mmu_context.h for no-op implementations x86: use asm-generic/mmu_context.h for no-op implementations um: use asm-generic/mmu_context.h for no-op implementations sparc: use asm-generic/mmu_context.h for no-op implementations sh: use asm-generic/mmu_context.h for no-op implementations s390: use asm-generic/mmu_context.h for no-op implementations riscv: use asm-generic/mmu_context.h for no-op implementations powerpc: use asm-generic/mmu_context.h for no-op implementations parisc: use asm-generic/mmu_context.h for no-op implementations openrisc: use asm-generic/mmu_context.h for no-op implementations nios2: use asm-generic/mmu_context.h for no-op implementations nds32: use asm-generic/mmu_context.h for no-op implementations mips: use asm-generic/mmu_context.h for no-op implementations microblaze: use asm-generic/mmu_context.h for no-op implementations m68k: use asm-generic/mmu_context.h for no-op implementations ia64: use asm-generic/mmu_context.h for no-op implementations hexagon: use asm-generic/mmu_context.h for no-op implementations csky: use asm-generic/mmu_context.h for no-op implementations ...
2020-12-15Merge tag 'asm-generic-cleanup-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cleanups from Arnd Bergmann: "These are a couple of compiler warning fixes to make 'make W=2' less noisy, as well as some fixes to code comments in asm-generic" * tag 'asm-generic-cleanup-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: syscalls: Fix file comments for syscalls implemented in kernel/sys.c ctype.h: remove duplicate isdigit() helper qspinlock: use signed temporaries for cmpxchg asm-generic: fix ffs -Wshadow warning asm-generic: percpu: avoid Wshadow warning asm-generic/sembuf: Update architecture related information in comment
2020-12-15asm-generic: force inlining of get_order() to work around gcc10 poor decisionChristophe Leroy
When building mpc885_ads_defconfig with gcc 10.1, the function get_order() appears 50 times in vmlinux: [linux]# ppc-linux-objdump -x vmlinux | grep get_order | wc -l 50 [linux]# size vmlinux text data bss dec hex filename 3842620 675624 135160 4653404 47015c vmlinux In the old days, marking a function 'static inline' was forcing GCC to inline, but since commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") GCC may decide to not inline a function. It looks like GCC 10 is taking poor decisions on this. get_order() compiles into the following tiny function, occupying 20 bytes of text. 0000007c <get_order>: 7c: 38 63 ff ff addi r3,r3,-1 80: 54 63 a3 3e rlwinm r3,r3,20,12,31 84: 7c 63 00 34 cntlzw r3,r3 88: 20 63 00 20 subfic r3,r3,32 8c: 4e 80 00 20 blr By forcing get_order() to be __always_inline, the size of text is reduced by 1940 bytes, that is almost twice the space occupied by 50 times get_order() [linux-powerpc]# size vmlinux text data bss dec hex filename 3840680 675588 135176 4651444 46f9b4 vmlinux Link: https://lkml.kernel.org/r/96c6172d619c51acc5c1c4884b80785c59af4102.1602949927.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Segher Boessenkool <segher@kernel.crashing.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15Merge tag 'irq-core-2020-12-15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Generic interrupt and irqchips subsystem updates. Unusually, there is not a single completely new irq chip driver, just new DT bindings and extensions of existing drivers to accomodate new variants! Core: - Consolidation and robustness changes for irq time accounting - Cleanup and consolidation of irq stats - Remove the fasteoi IPI flow which has been proved useless - Provide an interface for converting legacy interrupt mechanism into irqdomains Drivers: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups" * tag 'irq-core-2020-12-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits) irqchip/qcom-pdc: Fix phantom irq when changing between rising/falling driver core: platform: Add devm_platform_get_irqs_affinity() ACPI: Drop acpi_dev_irqresource_disabled() resource: Add irqresource_disabled() genirq/affinity: Add irq_update_affinity_desc() irqchip/gic-v3-its: Flag device allocation as proxied if behind a PCI bridge irqchip/gic-v3-its: Tag ITS device as shared if allocating for a proxy device platform-msi: Track shared domain allocation irqchip/ti-sci-intr: Fix freeing of irqs irqchip/ti-sci-inta: Fix printing of inta id on probe success drivers/irqchip: Remove EZChip NPS interrupt controller Revert "genirq: Add fasteoi IPI flow" irqchip/hip04: Make IPIs use handle_percpu_devid_irq() irqchip/bcm2836: Make IPIs use handle_percpu_devid_irq() irqchip/armada-370-xp: Make IPIs use handle_percpu_devid_irq() irqchip/gic, gic-v3: Make SGIs use handle_percpu_devid_irq() irqchip/ocelot: Add support for Jaguar2 platforms irqchip/ocelot: Add support for Serval platforms irqchip/ocelot: Add support for Luton platforms irqchip/ocelot: prepare to support more SoC ...
2020-12-15Merge tag 'irqchip-5.11' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates for 5.11 from Marc Zyngier: - Preliminary support for managed interrupts on platform devices - Correctly identify allocation of MSIs proxyied by another device - Remove the fasteoi IPI flow which has been proved useless - Generalise the Ocelot support to new SoCs - Improve GICv4.1 vcpu entry, matching the corresponding KVM optimisation - Work around spurious interrupts on Qualcomm PDC - Random fixes and cleanups Link: https://lore.kernel.org/r/20201212135626.1479884-1-maz@kernel.org
2020-12-14Merge tag 'x86-apic-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Thomas Gleixner: "Yet another large set of x86 interrupt management updates: - Simplification and distangling of the MSI related functionality - Let IO/APIC construct the RTE entries from an MSI message instead of having IO/APIC specific code in the interrupt remapping drivers - Make the retrieval of the parent interrupt domain (vector or remap unit) less hardcoded and use the relevant irqdomain callbacks for selection. - Allow the handling of more than 255 CPUs without a virtualized IOMMU when the hypervisor supports it. This has made been possible by the above modifications and also simplifies the existing workaround in the HyperV specific virtual IOMMU. - Cleanup of the historical timer_works() irq flags related inconsistencies" * tag 'x86-apic-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) x86/ioapic: Cleanup the timer_works() irqflags mess iommu/hyper-v: Remove I/O-APIC ID check from hyperv_irq_remapping_select() iommu/amd: Fix IOMMU interrupt generation in X2APIC mode iommu/amd: Don't register interrupt remapping irqdomain when IR is disabled iommu/amd: Fix union of bitfields in intcapxt support x86/ioapic: Correct the PCI/ISA trigger type selection x86/ioapic: Use I/O-APIC ID for finding irqdomain, not index x86/hyperv: Enable 15-bit APIC ID if the hypervisor supports it x86/kvm: Enable 15-bit extension when KVM_FEATURE_MSI_EXT_DEST_ID detected iommu/hyper-v: Disable IRQ pseudo-remapping if 15 bit APIC IDs are available x86/apic: Support 15 bits of APIC ID in MSI where available x86/ioapic: Handle Extended Destination ID field in RTE iommu/vt-d: Simplify intel_irq_remapping_select() x86: Kill all traces of irq_remapping_get_irq_domain() x86/ioapic: Use irq_find_matching_fwspec() to find remapping irqdomain x86/hpet: Use irq_find_matching_fwspec() to find remapping irqdomain iommu/hyper-v: Implement select() method on remapping irqdomain iommu/vt-d: Implement select() method on remapping irqdomain iommu/amd: Implement select() method on remapping irqdomain x86/apic: Add select() method on vector irqdomain ...
2020-12-14Merge tag 'core-mm-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kmap updates from Thomas Gleixner: "The new preemtible kmap_local() implementation: - Consolidate all kmap_atomic() internals into a generic implementation which builds the base for the kmap_local() API and make the kmap_atomic() interface wrappers which handle the disabling/enabling of preemption and pagefaults. - Switch the storage from per-CPU to per task and provide scheduler support for clearing mapping when scheduling out and restoring them when scheduling back in. - Merge the migrate_disable/enable() code, which is also part of the scheduler pull request. This was required to make the kmap_local() interface available which does not disable preemption when a mapping is established. It has to disable migration instead to guarantee that the virtual address of the mapped slot is the same across preemption. - Provide better debug facilities: guard pages and enforced utilization of the mapping mechanics on 64bit systems when the architecture allows it. - Provide the new kmap_local() API which can now be used to cleanup the kmap_atomic() usage sites all over the place. Most of the usage sites do not require the implicit disabling of preemption and pagefaults so the penalty on 64bit and 32bit non-highmem systems is removed and quite some of the code can be simplified. A wholesale conversion is not possible because some usage depends on the implicit side effects and some need to be cleaned up because they work around these side effects. The migrate disable side effect is only effective on highmem systems and when enforced debugging is enabled. On 64bit and 32bit non-highmem systems the overhead is completely avoided" * tag 'core-mm-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) ARM: highmem: Fix cache_is_vivt() reference x86/crashdump/32: Simplify copy_oldmem_page() io-mapping: Provide iomap_local variant mm/highmem: Provide kmap_local* sched: highmem: Store local kmaps in task struct x86: Support kmap_local() forced debugging mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCAL microblaze/mm/highmem: Add dropped #ifdef back xtensa/mm/highmem: Make generic kmap_atomic() work correctly mm/highmem: Take kmap_high_get() properly into account highmem: High implementation details and document API Documentation/io-mapping: Remove outdated blurb io-mapping: Cleanup atomic iomap mm/highmem: Remove the old kmap_atomic cruft highmem: Get rid of kmap_types.h xtensa/mm/highmem: Switch to generic kmap atomic sparc/mm/highmem: Switch to generic kmap atomic powerpc/mm/highmem: Switch to generic kmap atomic nds32/mm/highmem: Switch to generic kmap atomic ...
2020-12-14Merge tag 'perf-kprobes-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf/kprobes updates from Thomas Gleixner: "Make kretprobes lockless to avoid the rp->lock performance and potential lock ordering issues" * tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomics: Regenerate the atomics-check SHA1's kprobes: Replace rp->free_instance with freelist freelist: Implement lockless freelist asm-generic/atomic: Add try_cmpxchg() fallbacks kprobes: Remove kretprobe hash llist: Add nonatomic __llist_add() and __llist_dell_all()
2020-12-14Merge tag 'core-entry-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core entry/exit updates from Thomas Gleixner: "A set of updates for entry/exit handling: - More generalization of entry/exit functionality - The consolidation work to reclaim TIF flags on x86 and also for non-x86 specific TIF flags which are solely relevant for syscall related work and have been moved into their own storage space. The x86 specific part had to be merged in to avoid a major conflict. - The TIF_NOTIFY_SIGNAL work which replaces the inefficient signal delivery mode of task work and results in an impressive performance improvement for io_uring. The non-x86 consolidation of this is going to come seperate via Jens. - The selective syscall redirection facility which provides a clean and efficient way to support the non-Linux syscalls of WINE by catching them at syscall entry and redirecting them to the user space emulation. This can be utilized for other purposes as well and has been designed carefully to avoid overhead for the regular fastpath. This includes the core changes and the x86 support code. - Simplification of the context tracking entry/exit handling for the users of the generic entry code which guarantee the proper ordering and protection. - Preparatory changes to make the generic entry code accomodate S390 specific requirements which are mostly related to their syscall restart mechanism" * tag 'core-entry-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) entry: Add syscall_exit_to_user_mode_work() entry: Add exit_to_user_mode() wrapper entry_Add_enter_from_user_mode_wrapper entry: Rename exit_to_user_mode() entry: Rename enter_from_user_mode() docs: Document Syscall User Dispatch selftests: Add benchmark for syscall user dispatch selftests: Add kselftest for syscall user dispatch entry: Support Syscall User Dispatch on common syscall entry kernel: Implement selective syscall userspace redirection signal: Expose SYS_USER_DISPATCH si_code type x86: vdso: Expose sigreturn address on vdso to the kernel MAINTAINERS: Add entry for common entry code entry: Fix boot for !CONFIG_GENERIC_ENTRY x86: Support HAVE_CONTEXT_TRACKING_OFFSTACK context_tracking: Only define schedule_user() on !HAVE_CONTEXT_TRACKING_OFFSTACK archs sched: Detect call to schedule from critical entry code context_tracking: Don't implement exception_enter/exit() on CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK context_tracking: Introduce HAVE_CONTEXT_TRACKING_OFFSTACK x86: Reclaim unused x86 TI flags ...
2020-12-11Add and use a generic version of devmem_is_allowed()Palmer Dabbelt
As part of adding STRICT_DEVMEM support to the RISC-V port, Zong provided an implementation of devmem_is_allowed() that's exactly the same as the version in a handful of other ports. Rather than duplicate code, I've put a generic version of this in lib/ and used it for the RISC-V port. * palmer/generic-devmem: arm64: Use the generic devmem_is_allowed() arm: Use the generic devmem_is_allowed() RISC-V: Use the new generic devmem_is_allowed() lib: Add a generic version of devmem_is_allowed()
2020-12-11lib: Add a generic version of devmem_is_allowed()Palmer Dabbelt
As part of adding support for STRICT_DEVMEM to the RISC-V port, Zong provided a devmem_is_allowed() implementation that's exactly the same as all the others I checked. Instead I'm adding a generic version, which will soon be used. Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2020-12-11platform-msi: Track shared domain allocationMarc Zyngier
We have two flavours of platform-MSI: - MSIs generated by devices for themselves (the usual case) - MSIs generated on behalf of other devices, as the generating device is some form of bridge (either a wire-to-MSI bridge, or even a non-transparent PCI bridge that repaints the PCI requester ID). In the latter case, the underlying interrupt architecture may need to track this in order to keep the mapping alive even when no MSI are currently being generated. Add a set of flags to the generic msi_alloc_info_t structure, as well as the MSI_ALLOC_FLAGS_PROXY_DEVICE flag that will get advertized by the platform-MSI code when allocating an irqdomain for a device. Signed-off-by: Marc Zyngier <maz@kernel.org> Tested-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/20201129135208.680293-2-maz@kernel.org
2020-11-24mm/highmem: Provide and use CONFIG_DEBUG_KMAP_LOCALThomas Gleixner
CONFIG_KMAP_LOCAL can be enabled by x86/32bit even if CONFIG_HIGHMEM is not enabled for temporary MMIO space mappings. Provide it as a seperate config option which depends on CONFIG_KMAP_LOCAL and let CONFIG_DEBUG_HIGHMEM select it. This won't increase the debug coverage of this significantly but it paves the way to do so. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20201118204006.869487226@linutronix.de
2020-11-23irqstat: Move declaration into asm-generic/hardirq.hThomas Gleixner
Move the declaration of the irq_cpustat per cpu variable to asm-generic/hardirq.h and remove the now empty linux/irq_cpustat.h header. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.737377332@linutronix.de
2020-11-23asm-generic/irqstat: Add optional __nmi_count memberThomas Gleixner
Add an optional __nmi_count member to irq_cpustat_t so more architectures can use the generic version. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20201113141733.501611990@linutronix.de
2020-11-16audit: Migrate to use SYSCALL_WORK flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_AUDIT, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-9-krisman@collabora.com
2020-11-16ptrace: Migrate to use SYSCALL_TRACE flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SYSCALL_TRACE, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-7-krisman@collabora.com
2020-11-16seccomp: Migrate to use SYSCALL_WORK flagGabriel Krisman Bertazi
On architectures using the generic syscall entry code the architecture independent syscall work is moved to flags in thread_info::syscall_work. This removes architecture dependencies and frees up TIF bits. Define SYSCALL_WORK_SECCOMP, use it in the generic entry code and convert the code which uses the TIF specific helper functions to use the new *_syscall_work() helpers which either resolve to the new mode for users of the generic entry code or to the TIF based functions for the other architectures. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Link: https://lore.kernel.org/r/20201116174206.2639648-5-krisman@collabora.com
2020-11-15Merge branch 'for-5.10-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fix and cleanup from Dennis Zhou: "A fix for a Wshadow warning in the asm-generic percpu macros came in and then I tacked on the removal of flexible array initializers in the percpu allocator" * 'for-5.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: convert flexible array initializers to use struct_size() asm-generic: percpu: avoid Wshadow warning
2020-11-14compiler.h: fix barrier_data() on clangArvind Sankar
Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") neglected to copy barrier_data() from compiler-gcc.h into compiler-clang.h. The definition in compiler-gcc.h was really to work around clang's more aggressive optimization, so this broke barrier_data() on clang, and consequently memzero_explicit() as well. For example, this results in at least the memzero_explicit() call in lib/crypto/sha256.c:sha256_transform() being optimized away by clang. Fix this by moving the definition of barrier_data() into compiler.h. Also move the gcc/clang definition of barrier() into compiler.h, __memory_barrier() is icc-specific (and barrier() is already defined using it in compiler-intel.h) and doesn't belong in compiler.h. [rdunlap@infradead.org: fix ALPHA builds when SMP is not enabled] Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-07locking/atomics: Regenerate the atomics-check SHA1'sIngo Molnar
The include/asm-generic/atomic-instrumented.h checksum got out of sync, so regenerate it. (No change to actual code.) Also make scripts/atomic/gen-atomics.sh executable, to make it easier to use. The auto-generated atomic header signatures are now fine: thule:~/tip> scripts/atomic/check-atomics.sh thule:~/tip> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-07Merge branch 'linus' into perf/kprobesIngo Molnar
Conflicts: include/asm-generic/atomic-instrumented.h kernel/kprobes.c Use the upstream atomic-instrumented.h checksum, and pick the kprobes version of kernel/kprobes.c, which effectively reverts this upstream workaround: 645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting") Since the new code *should* be fine without nesting. Knock on wood ... Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-06highmem: Get rid of kmap_types.hThomas Gleixner
The header is not longer used and on alpha, ia64, openrisc, parisc and um it was completely unused anyway as these architectures have no highmem support. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201103095858.422094352@linutronix.de
2020-11-06asm-generic: Provide kmap_size.hThomas Gleixner
kmap_types.h is a misnomer because the old atomic MAP based array does not exist anymore and the whole indirection of architectures including kmap_types.h is inconinstent and does not allow to provide guard page debugging for this misfeature. Add a common header file which defines the mapping stack size for all architectures. Will be used when converting architectures over to a generic kmap_local/atomic implementation. The array size is chosen with the following constraints in mind: - The deepest nest level in one context is 3 according to code inspection. - The worst case nesting for the upcoming reemptible version would be: 2 maps in task context and a fault inside 2 maps in the fault handler 3 maps in softirq 2 maps in interrupt So a total of 16 is sufficient and probably overestimated. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Andrew Morton <akpm@linux-foundation.org> Link: https://lore.kernel.org/r/20201103095857.078043987@linutronix.de
2020-10-30Merge tag 'asm-generic-fixes-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fix from Arnd Bergmann: "One small bugfix, fixing a build regression for RISC-V" * tag 'asm-generic-fixes-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: mark __{get,put}_user_fn as __always_inline
2020-10-28genirq/msi: Allow shadow declarations of msi_msg:: $memberThomas Gleixner
Architectures like x86 have their MSI messages in various bits of the data, address_lo and address_hi field. Composing or decomposing these messages with bitmasks and shifts is possible, but unreadable gunk. Allow architectures to provide an architecture specific representation for each member of msi_msg. Provide empty defaults for each and stick them into an union. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-12-dwmw2@infradead.org
2020-10-27vmlinux.lds.h: Keep .ctors.* with .ctorsKees Cook
Under some circumstances, the compiler generates .ctors.* sections. This is seen doing a cross compile of x86_64 from a powerpc64el host: x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being placed in section `.ctors.65435' Include these orphans along with the regular .ctors section. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 83109d5d5fba ("x86/build: Warn on orphan section placement") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20201005025720.2599682-1-keescook@chromium.org
2020-10-27asm-generic: mark __{get,put}_user_fn as __always_inlineChristoph Hellwig
Without the explicit __always_inline, some RISC-V configs place the functions out of line, triggering the BUILD_BUG_ON checks in the function. Fixes: 11129e8ed4d9 ("riscv: use memcpy based uaccess for nommu again") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26asm-generic: percpu: avoid Wshadow warningArnd Bergmann
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Dennis Zhou <dennis@kernel.org>
2020-10-26qspinlock: use signed temporaries for cmpxchgArnd Bergmann
When building with W=2, the build log is flooded with include/asm-generic/qrwlock.h:65:56: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign] include/asm-generic/qrwlock.h:92:53: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign] include/asm-generic/qspinlock.h:68:55: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign] include/asm-generic/qspinlock.h:82:52: warning: pointer targets in passing argument 2 of 'atomic_try_cmpxchg_acquire' differ in signedness [-Wpointer-sign] The atomics are built on top of signed integers, but the caller doesn't actually care. Just use signed types as well. Fixes: 27df89689e25 ("locking/spinlocks: Remove an instruction from spin and write locks") Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26asm-generic: fix ffs -Wshadow warningArnd Bergmann
gcc -Wshadow warns about the ffs() definition that has the same name as the global ffs() built-in: include/asm-generic/bitops/builtin-ffs.h:13:28: warning: declaration of 'ffs' shadows a built-in function [-Wshadow] This is annoying because 'make W=2' warns every time this header gets included. Change it to use a #define instead, making callers directly reference the builtin. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26asm-generic: percpu: avoid Wshadow warningArnd Bergmann
Nesting macros that use the same local variable names causes warnings when building with "make W=2": include/asm-generic/percpu.h:117:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] include/asm-generic/percpu.h:126:14: warning: declaration of '__ret' shadows a previous local [-Wshadow] These are fairly harmless, but since the warning comes from a global header, the warning happens every time the headers are included, which is fairly annoying. Rename the variables to avoid shadowing and shut up the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-26asm-generic: add generic MMU versions of mmu context functionsNicholas Piggin
Many of these are no-ops on many architectures, so extend mmu_context.h to cover MMU and NOMMU, and split the NOMMU bits out to nommu_context.h Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arch@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24Merge tag 'riscv-for-linus-5.10-mw1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull more RISC-V updates from Palmer Dabbelt: "Just a single patch set: the remainder of Christoph's work to remove set_fs, including the RISC-V portion" * tag 'riscv-for-linus-5.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: remove address space overrides using set_fs() riscv: implement __get_kernel_nofault and __put_user_nofault riscv: refactor __get_user and __put_user riscv: use memcpy based uaccess for nommu again asm-generic: make the set_fs implementation optional asm-generic: add nommu implementations of __{get,put}_kernel_nofault asm-generic: improve the nommu {get,put}_user handling uaccess: provide a generic TASK_SIZE_MAX definition
2020-10-22Merge tag 'kbuild-v5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Support 'make compile_commands.json' to generate the compilation database more easily, avoiding stale entries - Support 'make clang-analyzer' and 'make clang-tidy' for static checks using clang-tidy - Preprocess scripts/modules.lds.S to allow CONFIG options in the module linker script - Drop cc-option tests from compiler flags supported by our minimal GCC/Clang versions - Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y - Use sha1 build id for both BFD linker and LLD - Improve deb-pkg for reproducible builds and rootless builds - Remove stale, useless scripts/namespace.pl - Turn -Wreturn-type warning into error - Fix build error of deb-pkg when CONFIG_MODULES=n - Replace 'hostname' command with more portable 'uname -n' - Various Makefile cleanups * tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: Use uname for LINUX_COMPILE_HOST detection kbuild: Only add -fno-var-tracking-assignments for old GCC versions kbuild: remove leftover comment for filechk utility treewide: remove DISABLE_LTO kbuild: deb-pkg: clean up package name variables kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n kbuild: enforce -Werror=return-type scripts: remove namespace.pl builddeb: Add support for all required debian/rules targets builddeb: Enable rootless builds builddeb: Pass -n to gzip for reproducible packages kbuild: split the build log of kallsyms kbuild: explicitly specify the build id style scripts/setlocalversion: make git describe output more reliable kbuild: remove cc-option test of -Werror=date-time kbuild: remove cc-option test of -fno-stack-check kbuild: remove cc-option test of -fno-strict-overflow kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan kbuild: do not create built-in objects for external module builds ...
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
generated by cgit v1.2.3 (git 2.0.4) at 2026-02-25 15:44:13 +0000