| Age | Commit message (Collapse) | Author |
|
Add the eDP revision bit value for 1.5.
Spec: eDPv1.5 Table 16-5
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Tested-by: Ben Kao <ben.kao@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250206063253.2827017-2-suraj.kandpal@intel.com
|
|
Bring rc1 to start the new release dev.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Sync with v6.14-rc1.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Extended wake timeout request helps to give additional
time by reading the DPCD register through which sink requests the
minimal amount of time required to wake the sink up.
Source device shall keep retying the AUX tansaction till the
extended timeout that is being granted for LTTPRs from the
sink device.
--v2
-Add documentation [Dmitry]
Spec: DP v2.1 Section 3.6.12.3
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-3-suraj.kandpal@intel.com
|
|
Add DPCD registers required to configure Extended Wake Timeout
for LTTPR.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250122053358.1545039-2-suraj.kandpal@intel.com
|
|
Avoid hardcoding the LSPCON settle timeout because it takes a longer
time on certain chips made by certain vendors. Use the function that
already exists to determine the timeout.
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Giedrius Statkevičius <giedriuswork@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241017075725.207384-1-giedriuswork@gmail.com
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
[Why]
The RAD of sideband message printed today is incorrect.
For RAD stored within MST branch
- If MST branch LCT is 1, it's RAD array is untouched and remained as 0.
- If MST branch LCT is larger than 1, use nibble to store the up facing
port number in cascaded sequence as illustrated below:
u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP
RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP
...
In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port
number of one nibble.
[How]
Adjust the code by:
- RAD array items are valuable only for LCT >= 1.
- Use 0xF as the mask to replace BIT_MASK(4)
V2:
- Document how RAD is constructed (Imre)
V3:
- Adjust the comment for rad[] so kdoc formats it properly (Lyude)
Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com
|
|
drm-next has the dmem cgroup patches we need to merge fixes for.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Driver Changes:
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs (Raag)
- Use hw support for min/interim ddb allocation for async flip (Vinod)
- More general code refactor to allow full display separation (Jani)
- Expose dsc sink max slice count via debugfs (Swati)
- Fix C10 pll programming sequence (Suraj)
- Fix DG1 power gate sequence (Rodrigo)
- Use preemption timeout on selftest cleanup (Janusz)
- DP DSC related fixes (Ankit)
- Fix HDCP compliance test (Suraj)
- Clean and Optimise mtl_ddi_prepare_link_retrain (Suraj)
- Adjust Added Wake Time with PKG_C_LATENCY (Animesh)
- Enabling uncompressed 128b/132b UHBR SST (Jani)
- Handle hdmi connector init failures, and no HDMI/DP cases (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z31_WPbBoHkwgEA9@intel.com
|
|
The struct drm_dp_mst_topology_mgr *mgr parameter is only used for debug
logging in case the passed in link rate or lane count are zero. There's
no further error checking as such, and the function returns 0.
There should be no case where the parameters are zero. The returned
value is generally used as a divisor, and if we were hitting this, we'd
be seeing division by zero.
Just remove the debug logging altogether, along with the mgr parameter,
so that the function can be used in non-MST contexts without the
topology manager.
v2: Also remove drm_dp_mst_helper_tests_init as unnecessary (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/72d77e7a7fe69c784e9df048b7e6f250fd7599e4.1735912293.git.jani.nikula@intel.com
|
|
The mode_valid() callbacks of drm_encoder, drm_crtc and drm_bridge
take a const struct drm_display_mode argument. Change the mode_valid
callback of drm_connector to also take a const argument.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241214-drm-connector-mode-valid-const-v2-5-4f9498a4c822@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add forward-declaration for the struct drm_display_mode, missed in the
commit 47368ab437fd ("drm/display: hdmi: add generic mode_valid helper")
Fixes: 47368ab437fd ("drm/display: hdmi: add generic mode_valid helper")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250104-hdmi-state-display-mode-v1-1-3c06d36e726f@linaro.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The HDMI Connectors need to perform a variety of tasks when the HDMI
connector state changes. Such tasks include setting or invalidating CEC
address, notifying HDMI codec driver, updating scrambler data, etc.
Implementing such tasks in a driver-specific callbacks is error prone.
Start implementing the generic helper function (currently handling only
the HDMI Codec framework) to be used by drivers utilizing HDMI Connector
framework.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-6-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Several DRM drivers implement HDMI codec support (despite its name it
applies to both HDMI and DisplayPort drivers). Implement generic
framework to be used by these drivers. This removes a requirement to
implement get_eld() callback and provides default implementation for
codec's plug handling.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241224-drm-bridge-hdmi-connector-v10-3-dc89577cd438@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
The v6.13-rc2 release included a bunch of breaking changes,
specifically the MODULE_IMPORT_NS commit.
Backmerge in order to fix them before the next pull-request.
Include the fix from Stephen Roswell.
Caused by commit
25c3fd1183c0 ("drm/virtio: Add a helper to map and note the dma addrs and lengths")
Interacting with commit
cdd30ebb1b9f ("module: Convert symbol namespace to string literal")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://patchwork.freedesktop.org/patch/msgid/20241209121717.2abe8026@canb.auug.org.au
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
If the MST topology is removed during the reception of an MST down reply
or MST up request sideband message, the
drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset
from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with
the reading/parsing of the message from another thread via
drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is
possible since the reader/parser doesn't hold any lock while accessing
the reception state. This in turn can lead to a memory corruption in the
reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST
sideband message body length check").
Fix the above by resetting the message reception state if needed before
reading/parsing a message. Another solution would be to hold the
drm_dp_mst_topology_mgr::lock for the whole duration of the message
reception/parsing in drm_dp_mst_handle_down_rep() and
drm_dp_mst_handle_up_req(), however this would require a bigger change.
Since the fix is also needed for stable, opting for the simpler solution
in this patch.
Cc: Lyude Paul <lyude@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 1d082618bbf3 ("drm/display/dp_mst: Fix down/up message handling after sink disconnect")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
|
|
Add drm_hdmi_connector_mode_valid(), generic helper for HDMI connectors.
It can be either used directly or as a part of the .mode_valid callback.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241130-hdmi-mode-valid-v5-4-742644ec3b1f@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/904fa73ea9ea976185062eeb493a08ffc43ed27e.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f626715ba4e348546770750aa3e10fac73a5cbd7.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
SST with 128b/132b channel coding needs this too. Extract to a separate
helper, independent of MST.
Pass timeout in as a parameter, anticipating that we can reduce the
timeout for SST.
v2: Clean up kernel-doc a bit
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/459fd3e96a55a8ea8ada8d27d93eaa24c235f9c1.1733238941.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
devfs:
- support device numbers up to MINORBITS limit
Core Changes:
ci:
- increase job timeout
devfs:
- use XArray for minor ids
displayport:
- mst: GUID improvements
docs:
- add fixes and cleanups
panic:
- optionally display QR code
Driver Changes:
amdgpu:
- faster vblank disabling
- GUID improvements
gm12u320
- convert to struct drm_edid
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
sti:
- convert to struct drm_edid
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
|
|
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Type-C programming fix for MTL+ (Gustavo)
- Fix display clock workaround (Mitul)
- Fix DP LTTPR detection (Imre)
- Calculate vblank delay more accurately (Ville)
- Make vrr_{enabling,disabling}() usable outside intel_display.c (Ville)
- FBC clean-up (Ville)
- DP link-training fixes and clean-up (Imre)
- Make I2C terminology more inclusive (Easwar)
- Make read-only array bw_gbps static const (Colin)
- HDCP fixes and improvements (Suraj)
- DP VSC SDP fixes and clean-ups (Suraj, Mitul)
- Fix opregion leak in Xe code (Lucas)
- Fix possible int overflow in skl_ddi_calculate_wrpll (Nikita)]
- General display clean-ups and conversion towards intel_display (Jani)
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates (Imre)
- Add VRR condition for DPKGC Enablement (Suraj)
- Use backlight power constants (Zimmermann)
- Correct dual pps handling for MTL_PCH+ (Dnyaneshwar)
- Dump DSC HW state (Imre)
- Replace double blank with single blank after comma (Andi)
- Read display register timeout on BMG (Mitul)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZruWsyTv3nzdArDk@intel.com
|
|
Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
A follow up i915 patch will need to reprobe the MST topology after the
initial probing, add a helper for this.
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240722165503.2084999-3-imre.deak@intel.com
|
|
Describe newly added parameter target_rr_divider in struct
drm_dp_as_sdp.
-v2:
Remove extra line from commit message.(Lucas)
-v3:
Rebase.
Fixes: a20c6d954d75 ("drm/dp: Add refresh rate divider to struct representing AS SDP")
Cc: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715162514.2836421-1-mitulkumar.ajitkumar.golani@intel.com
|
|
Backmerging to get a late RC of v6.10 before moving into v6.11.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Add a helper to dump the DPCD descriptor for an LTTPR PHY. This is based
on [1] and [2] moving the helper to DRM core as suggested by Ville.
[1] https://lore.kernel.org/all/20240703155937.1674856-5-imre.deak@intel.com
[2] https://lore.kernel.org/all/20240703155937.1674856-6-imre.deak@intel.com
Cc: dri-devel@lists.freedesktop.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240708190029.271247-6-imre.deak@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for $kernel-version:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- dp/mst: Fix daisy-chaining at resume
- dsc: Add helper to dump the DSC configuration
- tests: Add tests for the new monochrome TV mode variant
Driver Changes:
- ast: Refactor the mode setting code
- panfrost: Fix devfreq job reporting
- stm: Add LDVS support, DSI PHY updates
- panels:
- New panel: AUO G104STN01, K&d kd101ne3-40ti,
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240704-curvy-outstanding-lizard-bcea78@houat
|
|
Add a helper to dump the Display Stream Compression configuration, taken
into use in the i915 driver by a later patch.
v2:
- Rebase on the s/DRM_X16/FXP_Q4 change.
- s/DSC configration/DSC configuration in the function documentation.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-3-imre.deak@intel.com
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627-congenial-pistachio-nyala-848cf4@houat
|
|
If CONFIG_MODVERSIONS is enabled, then using the HDMI Connector
framework can result in build failures. Rename the function to make it
fit into the name requirements.
ERROR: modpost: too long symbol "drm_atomic_helper_connector_hdmi_disable_audio_infoframe" [drivers/gpu/drm/msm/msm.ko]
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624-hdmi-connector-shorten-name-v1-1-5bd3410138db@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 feature pull for v6.11:
Features and functionality:
- Battlemage (BMG) Xe2 HPD display enabling (Balasubramani, Clint, Gustavo,
José, Matt, Anusha, Lucas, Ravi, Radhakrishna, Nirmoy, Ankit, Matthew)
- Panel Replay enabling (Jouni, Animesh)
- DP AUX-less ALPM (Advanced Link Power Management) and LOBF (Link off between
frames) enabling (Animesh, Jouni)
- Enable link training failure fallback for DP MST links (Imre)
- CMRR (Content Match Refresh Rate) enabling (Mitul)
- Allow the first async flip to change modifier (Ville)
- Enable eDP AUX based HDR backlight (Suraj)
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps (Ville)
Refactoring and cleanups:
- Stop using implicit dev_priv local variable in macros (Jani)
- Expand and clean up VBT table definitions (Ville)
- PSR/ALPM refactoring (Jouni, Animesh)
- Plane fb refactoring (Ville)
- Rawclk, FSB, and mem frequency refactoring (Jani)
- GVT register macro usage cleanups (Jani, Ville)
- Plane, cursor, wm and ddb register macro and usage cleanups (Ville)
- Pipe CRC register macro cleanups (Ville)
- PCI ID macro cleanups and refactoring to match xe style (Jani)
- Move drm-intel repo to gitlab.freedesktop.org (Ryszard)
- Identify all platforms/subplatforms in display probe (Jani)
- Move Intel drm headers under include/drm/intel (Jani)
- Drop local redundant W=1 warnings in favour of drm subsystem warnigs (Jani)
- Include cleanups; include what you use (Jani)
- Convert overlay and DMC error state printing to drm_printer (Jani)
- Joiner renames (Stan)
- DSB interface cleanups (Ville)
- Improve workaround for disabling FBC when VT-d is active (Vinod)
- State checker refactoring and cleanups for color, planes and cdclk (Ville)
- Cleanups around scanline arithmetic (Ville)
- Use drm_crtc_vblank_crtc() instead of open coding (Ville)
- DSC cleanups (Ville)
Fixes:
- Improve VBT array bounds check (Luca)
- LNL PSR fixes (Jouni)
- Audio workaround, disable min hblank fix (Uma)
- Stop selecting ACPI_BUTTON config (Jani)
- Add MTL Cx0 PHY config compare (Mika)
- Fix MTL C20 PHY port clock verification (Mika)
- Fix static analyzer warning for uapi.event access (Luca)
- HDCP fixes and workarounds (Suraj)
- Fix DP MST DSC input BPP computation (Imre)
- Fix assert on pending async-put power domain work (Imre)
- Fix documentation build for DMC wakelocks (Luca)
- Disable DSC on eDP when indicated by VBT (Ville)
DRM Core changes:
- Various DPCD register additions for panel replay and ALPM (Jouni)
- Add target_rr_divider to adaptive sync SDP (Mitul)
Xe driver changes:
- Remove unused xe->enabled_irq_mask and xe->sb_lock members (Jani)
- i915 display compat header cleanups (Jani)
- Remove redundant copy of intel_fbdev_fb.h (Ville)
- Add process name to devcoredump (José)
- Add xe_gt_err_once() (Matthew)
- Implement transient flush for BMG/Xe3 (Nirmoy)
Merges:
- Backmerges to sync with xe, drm-misc and upstream (Rodrigo, Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87y170eu80.fsf@intel.com
|
|
Sync to v6.10-rc3.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add drm_atomic_helper_connector_hdmi_disable_audio_infoframe(), an API
to allow the driver disable sending the Audio Infoframe. This is to be
used by the drivers if setup of the infoframes is not tightly coupled
with the audio functionality and just disabling the audio playback
doesn't stop the HDMI hardware from sending the Infoframe.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-1-ab384e6021af@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Add missing Panel Replay Enable SU Region ET bit defined in DP2.1
specification.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240607134917.1327574-6-jouni.hogander@intel.com
|
|
Add target_rr_divider to structure representing AS SDP.
It is valid only in FAVT mode, sink device ignores the bit in AVT
mode.
--v2:
- Update commit header and send patch to dri-devel.
Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610072203.24956-6-mitulkumar.ajitkumar.golani@intel.com
|
|
eDP1.5 adds some more bits into DP_RECEIVER_ALPM_CAP and
DP_RECEIVER_ALPM_CONFIG registers. Add definitions for these.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240529200742.1694401-4-animesh.manna@intel.com
|
|
Add PANEL_REPLAY_CONFIGURATION_2 register and some missing Panel Replay
bits.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528114455.175961-3-jouni.hogander@intel.com
|
|
It fixes the following warnings when
the kernel documentation is generated:
./include/drm/display/drm_dp_helper.h:126:
warning: Function parameter or struct member
'mode' not described in 'drm_dp_as_sdp'
./include/drm/display/drm_dp_helper.h:126:
warning: Excess struct member 'operation_mode'
description in 'drm_dp_as_sdp'
Signed-off-by: MarileneGarcia <marilene.agarcia@gmail.com>
Fixes: 0bbb8f594e33 ("drm/dp: Add Adaptive Sync SDP logging")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20240405141640.09b0bdbf@canb.auug.org.au
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240519031027.433751-1-marilene.agarcia@gmail.com
|
|
Infoframes in KMS is usually handled by a bunch of low-level helpers
that require quite some boilerplate for drivers. This leads to
discrepancies with how drivers generate them, and which are actually
sent.
Now that we have everything needed to generate them in the HDMI
connector state, we can generate them in our common logic so that
drivers can simply reuse what we precomputed.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-22-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
A lot of HDMI drivers have some variation of the formula to calculate
the TMDS character rate from a mode, but few of them actually take all
parameters into account.
Let's create a helper to provide that rate taking all parameters into
account.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-9-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The next features we will need to share across drivers will need to
store some parameters for drivers to use, such as the selected output
format.
Let's create a new connector sub-state dedicated to HDMI controllers,
that will eventually store everything we need.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-3-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: lyude@redhat.com
Cc: imre.deak@intel.com
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com
(cherry picked from commit 4545614c1d8da603e57b60dd66224d81b6ffc305)
|
|
[Why]
Commit:
- commit 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
accidently overwrite the commit
- commit 54d217406afe ("drm: use mgr->dev in drm_dbg_kms in drm_dp_add_payload_part2")
which cause regression.
[How]
Recover the original NULL fix and remove the unnecessary input parameter 'state' for
drm_dp_add_payload_part2().
Fixes: 5aa1dfcdf0a4 ("drm/mst: Refactor the flow for payload allocation/removement")
Reported-by: Leon Weiß <leon.weiss@ruhr-uni-bochum.de>
Link: https://lore.kernel.org/r/38c253ea42072cc825dc969ac4e6b9b600371cc8.camel@ruhr-uni-bochum.de/
Cc: lyude@redhat.com
Cc: imre.deak@intel.com
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307062957.2323620-1-Wayne.Lin@amd.com
|
|
Add definitions for panel replay selective update
v2: Remove unnecessary Cc from commit message
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-6-jouni.hogander@intel.com
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next
Core Changes:
- Some DP/DP_MST DRM helpers (Imre)
Driver Changes (i915 Display):
- PLL refactoring (Ville)
- Limit eDP MSO pipe only for display version 20 (Luca)
- More display refactor towards independence from i915 dev_priv (Jani)
- QGV/SAGV related refactor (Stanislav)
- Few MTL/DSC and a UHBR monitor fix (Imre)
- BXT/GLK per-lane vswing and PHY reg cleanup (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Zik0LKEtN1PwXXGb@intel.com
|
|
Add a function to get the AUX device of the parent of an MST port, used
by a follow-up i915 patch in the patchset.
v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch
(Ankit)
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
|
|
Factor out a function to check if an MST port is logical, used by a
follow-up i915 patch in the patchset.
v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next
patch. (Ankit)
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
|
|
Factor out a function to check for 128b/132b channel coding support used
by a follow-up patch in the patchset.
v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported()
(Jani)
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
|