summaryrefslogtreecommitdiff
path: root/include/drm/drm_connector.h
AgeCommit message (Collapse)Author
2019-08-12drm: Fix kerneldoc warns in connector-related docsSean Paul
Fixes the following warnings: ../drivers/gpu/drm/drm_connector.c:989: WARNING: Unexpected indentation. ../drivers/gpu/drm/drm_connector.c:993: WARNING: Unexpected indentation. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. ../include/drm/drm_connector.h:544: WARNING: Inline interpreted text or phrase reference start-string without end-string. Changes in v2: - Use () instead of & for functions (Sam) Fixes: 1b27fbdde1df ("drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpers") Fixes: bb5a45d40d50 ("drm/hdcp: update content protection property with uevent") Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190812140112.6702-1-sean@poorly.run
2019-08-06drm: Add Content protection type propertyRamalingam C
This patch adds a DRM ENUM property to the selected connectors. This property is used for mentioning the protected content's type from userspace to kernel HDCP authentication. Type of the stream is decided by the protected content providers. Type 0 content can be rendered on any HDCP protected display wires. But Type 1 content can be rendered only on HDCP2.2 protected paths. So when a userspace sets this property to Type 1 and starts the HDCP enable, kernel will honour it only if HDCP2.2 authentication is through for type 1. Else HDCP enable will be failed. Pekka have completed the Weston DRM-backend review in https://gitlab.freedesktop.org/wayland/weston/merge_requests/48 and the UAPI for HDCP 2.2 looks good. The userspace is accepted in Weston. v2: cp_content_type is replaced with content_protection_type [daniel] check at atomic_set_property is removed [Maarten] v3: %s/content_protection_type/hdcp_content_type [Pekka] v4: property is created for the first requested connector and then reused. [Danvet] v5: kernel doc nits addressed [Daniel] Rebased as part of patch reordering. v6: Kernel docs are modified [pekka] v7: More details in Kernel docs. [pekka] v8: Few more clarification into kernel doc of content type [pekka] v9: Small fixes in coding style. v10: Moving DRM_MODE_HDCP_CONTENT_TYPEx definition to drm_hdcp.h [pekka] Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/320957/?series=57232&rev=14
2019-07-31drm: Add drm_connector_init() variant with ddcAndrzej Pietrasiewicz
Allow passing ddc adapter pointer to the init function. Even if drm_connector_init() sometime in the future decides to e.g. memset() all connector fields to zeros, the newly added function ensures that at its completion the ddc member of connector is correctly set. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/3915224ae895240fd0973cf7f06b9d453e4d8520.1564161140.git.andrzej.p@collabora.com
2019-07-31drm: Add ddc link in sysfs created by drm_connectorAndrzej Pietrasiewicz
Add generic code which creates symbolic links in sysfs, pointing to ddc interface used by a particular video output. For example: ls -l /sys/class/drm/card0-HDMI-A-1/ddc lrwxrwxrwx 1 root root 0 Jun 24 10:42 /sys/class/drm/card0-HDMI-A-1/ddc \ -> ../../../../soc/13880000.i2c/i2c-2 This makes it easy for user to associate a display with its ddc adapter and use e.g. ddcutil to control the chosen monitor. This patch adds an i2c_adapter pointer to struct drm_connector. Particular drivers can then use it instead of using their own private instance. If a connector contains a ddc, then create a symbolic link in sysfs. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/d470def6cd661b777faeee67b5838a4623c4010e.1564161140.git.andrzej.p@collabora.com
2019-06-26drm: Add bus flag for Sharp-specific signalsPaul Cercueil
Add the DRM_BUS_FLAG_SHARP_SIGNALS to the drm_bus_flags enum. This flags can be used when the display must be driven with the Sharp-specific signals SPL, CLS, REV, PS. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190603153120.23947-2-paul@crapouillou.net
2019-06-19drm/modes: Parse overscan propertiesMaxime Ripard
Properly configuring the overscan properties might be needed for the initial setup of the framebuffer for display that still have overscan. Let's allow for more properties on the kernel command line to setup each margin. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/e481f1628e3768ca49226ec2115cfa4dfcbd5e4c.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-19drm/connector: Introduce a TV margins structureMaxime Ripard
The TV margins has been defined as a structure inside the drm_connector_state structure so far. However, we will need it in other structures as well, so let's move that structure definition so that it can be reused. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/38b773b03f15ec7a135cdf8f7db669e5ada20cf2.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-19drm/modes: Allow to specify rotation and reflection on the commandlineMaxime Ripard
Rotations and reflections setup are needed in some scenarios to initialise properly the initial framebuffer. Some drivers already had a bunch of quirks to deal with this, such as either a private kernel command line parameter (omapdss) or on the device tree (various panels). In order to accomodate this, let's create a video mode parameter to deal with the rotation and reflexion. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/777da16e42db757c1f5b414b5ca34507097fed5c.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-19drm/modes: Support modes names on the command lineMaxime Ripard
The drm subsystem also uses the video= kernel parameter, and in the documentation refers to the fbdev documentation for that parameter. However, that documentation also says that instead of giving the mode using its resolution we can also give a name. However, DRM doesn't handle that case at the moment. Even though in most case it shouldn't make any difference, it might be useful for analog modes, where different standards might have the same resolution, but still have a few different parameters that are not encoded in the modes (NTSC vs NTSC-J vs PAL-M for example). Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/18443e0c3bdbbd16cea4ec63bc7f2079b820b43b.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-19drm/connector: Add documentation for drm_cmdline_modeMaxime Ripard
The struct drm_cmdline_mode holds the result of the command line parsers. However, it wasn't documented so far, so let's do that. Reviewed-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/963c893c16c6a25fc469b53c726f493d99bdc578.1560783090.git-series.maxime.ripard@bootlin.com
2019-06-13drm: Add helpers to kick off self refresh mode in driversSean Paul
This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190612145026.191846-1-sean@poorly.run
2019-06-13drm: Add drm_atomic_get_(old|new)_connector_for_encoder() helpersLaurent Pinchart
Add functions to the atomic core to retrieve the old and new connectors associated with an encoder in a drm_atomic_state. This is useful for encoders and bridges that need to access the connector, for instance for the drm_display_info. The CRTC associated with the encoder can also be retrieved through the connector state, and from it, the old and new CRTC states. Changed in v4: - Added to the set Changed in v5: - Fix up docbook (Daniel & Laurent) Changed in v6: - Updated commit subject (Sam) Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [seanpaul removed WARNs from helpers and added docs to explain why returning NULL might be valid] Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190611205147.181298-1-sean@poorly.run
2019-06-04drm: Fix docbook warnings in hdr metadata helper structuresUma Shankar
Fixes the following warnings: ./include/drm/drm_mode_config.h:841: warning: Incorrect use of kernel-doc format: * hdr_output_metadata_property: Connector property containing hdr ./include/drm/drm_mode_config.h:918: warning: Function parameter or member 'hdr_output_metadata_property' not described in 'drm_mode_config' ./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_output_metadata' not described in 'drm_connector' ./include/drm/drm_connector.h:1251: warning: Function parameter or member 'hdr_sink_metadata' not described in 'drm_connector' Also adds some property documentation for HDR Metadata Connector Property in connector property create function. v2: Fixed Sean Paul's review comments. v3: Fixed Daniel Vetter's review comments, added the UAPI structure definition section in kernel docs. v4: Fixed Daniel Vetter's review comments. v5: Added structure member references as per Daniel's suggestion. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Reviewed-by: Sean Paul <sean@poorly.run> (v1) Signed-off-by: Uma Shankar <uma.shankar@intel.com> [danvet: Fix up markup: () for functions, & for structs. Style guide also recommends to prepend struct for structures.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1559647022-7336-1-git-send-email-uma.shankar@intel.com
2019-06-03drm: Drop a redundant unused variableUma Shankar
Drop a redundant and unused variable "hdr_output_metadata" from drm_connector. Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1559159944-21103-2-git-send-email-uma.shankar@intel.com
2019-05-28Merge tag 'drm-intel-next-2019-05-24' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Features: - Engine discovery query (Tvrtko) - Support for DP YCbCr4:2:0 outputs (Gwan-gyeong) - HDCP revocation support, refactoring (Ramalingam) - Remove DRM_AUTH from IOCTLs which also have DRM_RENDER_ALLOW (Christian König) - Asynchronous display power disabling (Imre) - Perma-pin uC firmware and re-enable global reset (Fernando) - GTT remapping for display, for bigger fb size and stride (Ville) - Enable pipe HDR mode on ICL if only HDR planes are used (Ville) - Kconfig to tweak the busyspin durations for i915_wait_request (Chris) - Allow multiple user handles to the same VM (Chris) - GT/GEM runtime pm improvements using wakerefs (Chris) - Gen 4&5 render context support (Chris) - Allow userspace to clone contexts on creation (Chris) - SINGLE_TIMELINE flags for context creation (Chris) - Allow specification of parallel execbuf (Chris) Refactoring: - Header refactoring (Jani) - Move GraphicsTechnology files under gt/ (Chris) - Sideband code refactoring (Chris) Fixes: - ICL DSI state readout and checker fixes (Vandita) - GLK DSI picture corruption fix (Stanislav) - HDMI deep color fixes (Clinton, Aditya) - Fix driver unbinding from a device in use (Janusz) - Fix clock gating with pipe scaling (Radhakrishna) - Disable broken FBC on GLK (Daniel Drake) - Miscellaneous GuC fixes (Michal) - Fix MG PHY DP register programming (Imre) - Add missing combo PHY lane power setup (Imre) - Workarounds for early ICL VBT issues (Imre) - Fix fastset vs. pfit on/off on HSW EDP transcoder (Ville) - Add readout and state check for pch_pfit.force_thru (Ville) - Miscellaneous display fixes and refactoring (Ville) - Display workaround fixes (Ville) - Enable audio even if ELD is bogus (Ville) - Fix use-after-free in reporting create.size (Chris) - Sideband fixes to avoid BYT hard lockups (Chris) - Workaround fixes and improvements (Chris) Maintainer shortcomings: - Failure to adequately describe and give credit for all changes (Jani) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87sgt3n45z.fsf@intel.com
2019-05-22drm: Add HDR source metadata propertyUma Shankar
This patch adds a blob property to get HDR metadata information from userspace. This will be send as part of AVI Infoframe to panel. It also implements get() and set() functions for HDR output metadata property.The blob data is received from userspace and saved in connector state, the same is returned as blob in get property call to userspace. v2: Rebase and modified the metadata structure elements as per Ville's POC changes. v3: No Change v4: Addressed Shashank's review comments v5: Rebase. v6: Addressed Brian Starkey's review comments, defined new structure with header for dynamic metadata scalability. Merge get/set property functions for metadata in this patch. v7: Addressed Jonas Karlman review comments and defined separate structure for infoframe to better align with CTA 861.G spec. Added Shashank's RB. v8: Addressed Ville's review comments. Moved sink metadata structure out of uapi headers as suggested by Jonas Karlman. v9: Rebase and addressed Jonas Karlman review comments. v10: Addressed Ville's review comments, dropped the metdata_changed state variable as its not needed anymore. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1558015817-12025-2-git-send-email-uma.shankar@intel.com
2019-05-09drm/hdcp: gathering hdcp related code into drm_hdcp.cRamalingam C
Considering the significant size of hdcp related code in drm, all hdcp related codes are moved into separate file called drm_hdcp.c. v2: Rebased. v2: Rebased. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-7-ramalingam.c@intel.com
2019-05-09drm: move content protection property to mode_configRamalingam C
Content protection property is created once and stored in drm_mode_config. And attached to all HDCP capable connectors. Signed-off-by: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190507162745.25600-2-ramalingam.c@intel.com
2019-05-07drm/doc: Improve docs for conn_state->best_encoderDaniel Vetter
It's mandatory and considered core state since ioctls rely on this working. Thanks to Laurent for pointing out this gap. v2: Clarify to "atomic drivers" only. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sean Paul <sean@poorly.run> Acked-by: Sean Paul <sean@poorly.run> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506144629.5976-1-daniel.vetter@ffwll.ch
2019-03-29Merge tag 'drm-misc-next-2019-03-28-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Remove unused DRM_DISPLAY_INFO_LEN (Ville) Cross-subsystem Changes: - None Core Changes: - Fix compilation when CONFIG_FBDEV not selected (Daniel) - fbdev: Make skip_vt_switch default (Daniel) - Merge fb_helper_fill_fix, fb_helper_fill_var into fb_helper_fill_info (Daniel) - Remove unused fields in connector, display_info, and edid_quirks (Ville) Driver Changes: - virtio: package function args in virtio_gpu_object_params (Gerd) - vkms: Fix potential NULL-dereference bug (Kangjie) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190328183045.GA44823@art_vandelay
2019-03-27drm: Kill drm_display_info.nameVille Syrjälä
drm_display_info.name is only ever set by a few panel drivers but never actually used anywhere except in i915 debugfs code. Trash it. v2: Fix typo in commit msg (Sam Ravnborg) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-3-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-03-27drm: Fix tabs vs. spacesVille Syrjälä
A set of 8 spaces has snuck in. Replace with a tab, and toss in an extra newline while at it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-2-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-03-27drm: Nuke unused drm_display_info.pixel_clockVille Syrjälä
drm_display_info.pixel_clock is unused. Let's get rid of it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190326173401.7329-1-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2019-03-25Merge tag 'drm-misc-next-2019-03-21' of ↵Daniel Vetter
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.2: UAPI Changes: - Add Colorspace connector property (Uma) - fourcc: Several new YUV formats from ARM (Brian & Ayan) - fourcc: Fix merge conflicts between new formats above and Swati's that went in via topic/hdr-formats-2019-03-07 branch (Maarten) Cross-subsystem Changes: - Typed component support via topic/component-typed-2019-02-11 (Maxime/Daniel) Core Changes: - Improve component helper documentation (Daniel) - Avoid calling drm_dev_unregister() twice on unplugged devices (Noralf) - Add device managed (devm) drm_device init function (Noralf) - Graduate TINYDRM_MODE to DRM_SIMPLE_MODE in core (Noralf) - Move MIPI/DSI rate control params computation into core from i915 (David) - Add support for shmem backed gem objects (Noralf) Driver Changes: - various: Use of_node_name_eq for node name comparisons (Rob Herring) - sun4i: Add DSI burst mode support (Konstantin) - panel: Add Ronbo RB070D30 MIPI/DSI panel support (Konstantin) - virtio: A few prime improvements (Gerd) - tinydrm: Remove tinydrm_device (Noralf) - vc4: Add load tracker to driver to detect underflow in atomic check (Boris) - vboxvideo: Move it out of staging \o/ (Hans) - v3d: Add support for V3D v4.2 (Eric) Cc: Konstantin Sudakov <k.sudakov@integrasources.com> Cc: Rob Herring <robh@kernel.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: David Francis <David.Francis@amd.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Ayan Kumar Halder <ayan.halder@arm.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190321170805.GA50145@art_vandelay
2019-03-18drm: Turn bus flags macros into an enumLaurent Pinchart
This allows nicer kerneldoc with an easy way to reference the enum and the values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-03-18drm: Clarify definition of the DRM_BUS_FLAG_(PIXDATA|SYNC)_* macrosLaurent Pinchart
The DRM_BUS_FLAG_PIXDATA_POSEDGE and DRM_BUS_FLAG_PIXDATA_NEGEDGE macros and their DRM_BUS_FLAG_SYNC_* counterparts define on which pixel clock edge data and sync signals are driven. They are however used in some drivers to define on which pixel clock edge data and sync signals are sampled, which should usually (but not always) be the opposite edge of the driving edge. This creates confusion. Create four new macros for both PIXDATA and SYNC that explicitly state the driving and sampling edge in their name to remove the confusion. The driving macros are defined as the opposite of the sampling macros to made code simpler based on the assumption that the driving and sampling edges are opposite. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stefan Agner <stefan@agner.ch> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2019-02-19drm: Add HDMI colorspace propertyUma Shankar
Create a new connector property to program colorspace to sink devices. Modern sink devices support more than 1 type of colorspace like 601, 709, BT2020 etc. This helps to switch based on content type which is to be displayed. The decision lies with compositors as to in which scenarios, a particular colorspace will be picked. This will be helpful mostly to switch to higher gamut colorspaces like BT2020 when the media content is encoded as BT2020. Thereby giving a good visual experience to users. The expectation from userspace is that it should parse the EDID and get supported colorspaces. Use this property and switch to the one supported. Sink supported colorspaces should be retrieved by userspace from EDID and driver will not explicitly expose them. Basically the expectation from userspace is: - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink colorspace - Set this new property to let the sink know what it converted the CRTC output to. v2: Addressed Maarten and Ville's review comments. Enhanced the colorspace enum to incorporate both HDMI and DP supported colorspaces. Also, added a default option for colorspace. v3: Removed Adobe references from enum definitions as per Ville, Hans Verkuil and Jonas Karlman suggestions. Changed Default to an unset state where driver will assign the colorspace is not chosen by user, suggested by Ville and Maarten. Addressed other misc review comments from Maarten. Split the changes to have separate colorspace property for DP and HDMI. v4: Addressed Chris and Ville's review comments, and created a common colorspace property for DP and HDMI, filtered the list based on the colorspaces supported by the respective protocol standard. v5: Made the property creation helper accept enum list based on platform capabilties as suggested by Shashank. Consolidated HDMI and DP property creation in the common helper. v6: Addressed Shashank's review comments. v7: Added defines instead of enum in uapi as per Brian Starkey's suggestion in order to go with string matching at userspace. Updated the commit message to add more details as well kernel docs. v8: Addressed Maarten's review comments. v9: Removed macro defines from uapi as per Brian Starkey and Daniel Stone's comments and moved to drm include file. Moved back to older design with exposing all HDMI colorspaces to userspace since infoframe capability is there even on legacy platforms, as per Ville's review comments. v10: Fixed sparse warnings, updated the RB from Maarten and Jani's ack. v11: Addressed Ville's review comments. Updated the Macro naming and added DCI-P3 colorspace as well, defined in CTA 861.G spec. v12: Appended BT709 and SMPTE 170M with YCC information as per Ville's review comment to be clear and not to be confused with RGB. v13: Reorder the colorspace macros. v14: Removed DP as of now, will be added later once full support is enabled, as per Ville's suggestion. Added Ville's RB. Signed-off-by: Uma Shankar <uma.shankar@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1550596381-993-2-git-send-email-uma.shankar@intel.com
2019-02-04drm: Trivial comment grammar cleanupsMatt Roper
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202012326.20096-1-matthew.d.roper@intel.com
2019-01-11Merge drm/drm-next into drm-misc-nextMaxime Ripard
drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage helper for dirtyfb series from Noralf Trønnes. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-01-10drm/edid: Add display_info.rgb_quant_range_selectableVille Syrjälä
Move the CEA-861 QS bit handling entirely into the edid code. No need to bother the drivers with this. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVERS FOR VC4) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-4-ville.syrjala@linux.intel.com
2019-01-10Merge tag 'drm-misc-next-2019-01-07-1' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 5.1: UAPI Changes: Cross-subsystem Changes: - Turn dma-buf fence sequence numbers into 64 bit numbers Core Changes: - Move to a common helper for the DP MST hotplug for radeon, i915 and amdgpu - i2c improvements for drm_dp_mst - Removal of drm_syncobj_cb - Introduction of an helper to create and attach the TV margin properties Driver Changes: - Improve cache flushes for v3d - Reflection support for vc4 - HDMI overscan support for vc4 - Add implicit fencing support for rockchip and sun4i - Switch to generic fbdev emulation for virtio Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: applied amdgpu merge fixup] From: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107180333.amklwycudbsub3s5@flea
2018-12-19drm/connector: Allow creation of margin props aloneBoris Brezillon
TV margins properties can only be added as part of the SDTV TV connector properties creation, but we might need those props for HDMI TVs too, so let's move the margins props creation in a separate function and expose it to drivers. We also add an helper to attach margins props to a connector. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-4-boris.brezillon@bootlin.com
2018-12-19drm/connector: Clarify the unit of TV marginsBoris Brezillon
All margins are expressed in pixels. Clarify that in the doc. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181206142439.10441-3-boris.brezillon@bootlin.com
2018-12-06Merge branch 'drm-next-4.21' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-next amdgpu and amdkfd: - Freesync support - ABM support in DC - KFD support for vega12 and polaris12 - Add sdma paging queue support for vega - Use ACPI to query backlight range on supported platforms - Clean up doorbell handling - KFD fix for pasid handling under non-HWS - Misc cleanups and fixes scheduler: - Revert "fix timeout handling v2" radeon: - Fix possible overflow on 32 bit ttm: - Fix for LRU handling for ghost objects Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130192505.2946-1-alexander.deucher@amd.com
2018-11-29Merge tag 'drm-misc-next-2018-11-28' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com
2018-11-28drm: Add vrr_capable property to the drm connectorNicholas Kazlauskas
Modern display hardware is capable of supporting variable refresh rates. This patch introduces the "vrr_capable" property on the connector to allow userspace to query support for variable refresh rates. Atomic drivers should attach this property to connectors that are capable of driving variable refresh rates using drm_connector_attach_vrr_capable_property(). The value should be updated based on driver and hardware capability by using drm_connector_set_vrr_capable_property(). Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-24drm: remove deprecated "drm_connector_[un]reference" functionsFernando Ramos
There are no more places where this (deprecated) function is being used from, thus it can now be removed. Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-7-greenfoo@gluegarage.com
2018-11-20Merge drm/drm-next into drm-intel-next-queuedJani Nikula
Pull in v4.20-rc3 via drm-next. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2018-11-19Merge tag 'drm-misc-next-2018-11-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v4.21, part 1: UAPI Changes: - Add syncobj timeline support to drm. Cross-subsystem Changes: - Remove shared fence staging in dma-buf's fence object, and allow reserving more than 1 fence and add more paranoia when debugging. - Constify infoframe functions in video/hdmi. Core Changes: - Add vkms todo, and a lot of assorted doc fixes. - Drop transitional helpers and convert drivers to use drm_atomic_helper_shutdown(). - Move atomic state helper functions to drm_atomic_state_helper.[ch] - Refactor drm selftests, and add new tests. - DP MST atomic state cleanups. - Drop EXPORT_SYMBOL from drm leases. - Lease cleanups and fixes. - Create render node for vgem. Driver Changes: - Fix build failure in imx without fbdev emulation. - Add rotation quirk for GPD win2 panel. - Add support for various CDTech panels, Banana Pi Panel, DLC1010GIG, Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, Himax HX8357D, simulated RTSM AEMv8. - Add dw_hdmi support to rockchip driver. - Fix YUV support in vc4. - Fix resource id handling in virtio. - Make rockchip use dw-mipi-dsi bridge driver, and add dual dsi support. - Advertise that tinydrm only supports DRM_FORMAT_MOD_LINEAR. - Convert many drivers to use atomic helpers, and drm_fbdev_generic_setup(). - Add Mali linear tiled formats, and enable them in the Mali-DP driver. - Add support for H6 DE3 mixer 0, DW HDMI, HDMI PHY and TCON TOP. - Assorted driver cleanups and fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/be7ebd91-edd9-8fa4-4286-1c57e3165113@linux.intel.com
2018-11-13Merge remote-tracking branch 'drm/drm-next' into drm-misc-nextMaarten Lankhorst
drm-next is forwarded to v4.20-rc1, and we need this to make a patch series apply. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2018-11-02drm: Add connector property to limit max bpcRadhakrishna Sripada
At times 12bpc HDMI cannot be driven due to faulty cables, dongles level shifters etc. To workaround them we may need to drive the output at a lower bpc. Currently the user space does not have a way to limit the bpc. The default bpc to be programmed is decided by the driver and is run against connector limitations. Creating a new connector property "max bpc" in order to limit the bpc. xrandr can make use of this connector property to make sure that bpc does not exceed the configured value. This property can be used by userspace to set the bpc. V2: Initialize max_bpc to satisfy kms_properties V3: Move the property to drm_connector V4: Split drm and i915 components(Ville) V5: Make the property per connector(Ville) V6: Compare the requested bpc to connector bpc(Daniel) Move the attach_property function to core(Ville) V7: Fix checkpatch warnings V8: Simplify the connector check code(Ville) V9: Const display_info(Ville) V10,V11: Fix CI issues. V12: Add the Kernel documentation(Daniel) V14: Crossreference the function name in the doc(Daniel) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Kishore Kadiyala <kishore.kadiyala@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Sunpeng Li <sunpeng.li@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181012184233.29250-1-radhakrishna.sripada@intel.com
2018-10-19drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul
Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com (cherry picked from commit 39b50c603878f4f8ae541ac4088a805d588abc79) Fixes: e96550956fbc ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Fixes: 34ca26a98ad6 ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: stable@vger.kernel.org Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-10-17drm/atomic_helper: Stop modesets on unregistered connectors harderLyude Paul
Unfortunately, it appears our fix in: commit b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Which attempted to work around the problems introduced by: commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") Is still not the right solution, as modesets can still be triggered outside of drm_atomic_set_crtc_for_connector(). So in order to fix this, while still being careful that we don't break modesets that a driver may perform before being registered with userspace, we replace connector->registered with a tristate member, connector->registration_state. This allows us to keep track of whether or not a connector is still initializing and hasn't been exposed to userspace, is currently registered and exposed to userspace, or has been legitimately removed from the system after having once been present. Using this info, we can prevent userspace from performing new modesets on unregistered connectors while still allowing the driver to perform modesets on unregistered connectors before the driver has finished being registered. Changes since v1: - Fix WARN_ON() in drm_connector_cleanup() that CI caught with this patchset in igt@drv_module_reload@basic-reload-inject and igt@drv_module_reload@basic-reload by checking if the connector is registered instead of unregistered, as calling drm_connector_cleanup() on a connector that hasn't been registered with userspace yet should stay valid. - Remove unregistered_connector_check(), and just go back to what we were doing before in commit 4d80273976bf ("drm/atomic_helper: Disallow new modesets on unregistered connectors") except replacing READ_ONCE(connector->registered) with drm_connector_is_unregistered(). This gets rid of the behavior of allowing DPMS On<->Off, but that should be fine as it's more consistent with the UAPI we had before - danvet - s/drm_connector_unregistered/drm_connector_is_unregistered/ - danvet - Update documentation, fix some typos. Fixes: b5d29843d8ef ("drm/atomic_helper: Allow DPMS On<->Off changes for unregistered connectors") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: stable@vger.kernel.org Cc: David Airlie <airlied@linux.ie> Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181016203946.9601-1-lyude@redhat.com
2018-10-05drm: add drm_connector_attach_edid_property()Gerd Hoffmann
drm_connector_init doesn't attach the edid property for some connector types, drm_connector_attach_edid_property() can be used to enable the edid property in these cases. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20181002111041.17053-2-kraxel@redhat.com
2018-09-09drm: Add drm/drm_util.h header fileDaniel Vetter
We have a bunch of neat little macros all over the place which should move to kernel.h. But some of them died in bikesheds on lkml, and we need a decent home for them. Start out by moving the for_each_if macro there. v2: Rename to drm_util.h instead (Dave&Sean) Cc: Sean Paul <seanpaul@chromium.org> Acked-by: Sean Paul <seanpaul@chromium.org> Cc: Dave Airlie <airlied@gmail.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180905135711.28370-1-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from remaining connector functionsDaniel Vetter
Since there's very few callers of these I've decided to do them all in one patch. With this the unecessarily long drm_mode_connector_ prefix is gone from the codebase! The only exception being struct drm_mode_connector_set_property, which is part of the uapi so can't be renamed. Again done with sed+some manual fixups for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-8-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-13drm/doc: polish for sturct drm_connectorDaniel Vetter
- switch everything over to inline comments - add notes about locking, links to functions and other related stuff - also include a note about Ville's soon-to-be-merged drm_connector_for_each_possible_encoder(). Also check that all the hyperlinks in drm_connector.h work and fix them as needed. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-5-daniel.vetter@ffwll.ch
2018-07-13drm/doc: switch drm_connector_state to inline commentsDaniel Vetter
For consistency. Also spelled out the docs for ->best_encoder a bit more while at it. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-4-daniel.vetter@ffwll.ch
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-02 13:53:21 +0000