| Age | Commit message (Collapse) | Author |
|
Remove includes which are not referenced by either DTS files or drivers.
There's a few more which are new, so they are excluded for now.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251212231203.727227-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.20, part two
Add DPU clock management unit nodes to Google GS101.
* tag 'samsung-dt64-6.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: gs101: add cmu_dpu and sysreg_dpu dt nodes
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree for v6.20
Introduce the Kaanapali SoC, with the MTP and QRD devices. Introduce
support for the Milos SoC (SM7635) and initial support for the Fairphone
(Gen 6) device on this platform.
Add the QCS6490-based RubikPI3 board, the QRB2210-based Arduino UnoQ,
the X Elite-based Medion SPRCHRGD 14 S1 and Surface Pro 11 laptops, and
the SDM845-based Pixel 3 and Pixel 3 XL devices.
On the Kodiak-based (QCS6490) RB3Gen2 the TC9563 PCIe switch controller
is described.
On Lemans (SA8775P/QCS9075) the GPU and crypto blocks are added.
IO-regions and clocks are added to interconnect nodes to allow QoS
configuration. GPU, TPM and USB support are enabled on the evaluation
kit (EVK).
On Monaco (QCS8300) the two PCIe controllers, the camera subsystem,
tsens, display subsystem, crypto, CPUfreq, and coresight are added. On
the evaluation kit (EVK) the PCIe busses are enabled, together with an
AMC6821-based fan controller and the ST33 TPM chip.
On MSM8939 the camera subsystem is described. The Asus ZenFone 2
Laser/Selfie gains battery and hall sensor support.
On the Agatti-based RB1 board PM8008 is described and an overlay for the
Vision mezzanine is introduced.
On SDM630 the compute DSP remoteproc, FastRPC and related entites are
described. The LPASS LPI pinctrl node is described.
On SDM845-based OnePlus device the bootloader framebuffer and its
resources are described, to improve the transition. On the SDM845-based
devices from OnePlus, SHIFT, and Xiaomi ath10k calibration variants are
specified. The sensor remoteproc is enabled on Xiaomi Pocophone F1.
On SM7225-based Fairphone FP4 regulators for the cameras are described,
and the camera EEPROM is added.
On SM8650 the camera subsystem is described. On the QRD the Samsung
S5KJN1 camera sensor is added, and for the HDK an overlay for the "Rear
Camera Card" is added.
On SM8750 CPUfreq, SDCHCI and Iris (video encode/decode) support are
added, and missing - required - properties for the BAM DMA is added.
These are then enabled on the MTP.
On Talos (SM6150/QCS615) PMU, DisplayPort, and USB/DP combo PHY are added.
DisplayPort is enabled on the Talos Ride board.
On Hamoa (X Elite) add crypto engine, missing TCSR reference clocks, and
random number generator block. The soc bus address width is corrected to
match the hardware. On the Lenovo Thinkpad T14s HDMI and audio playback
over DisplayPort is introduced. HDMI, Iris (video encode/decode) and
PS8830 retimers are described for the ASUS Vivobook S 15. On the Hamoa
evaluation kit (EVK) PCIe busses, WiFi, backlight, TPM and RG
(red/green) LEDs are described.
Enable QSEECOM, and thereby UEFI variable access, on the Medion SPRCHRGD
14 S1 (commit should have been on drivers branch).
* tag 'qcom-arm64-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (155 commits)
dt-bindings: mailbox: qcom: Add IPCC support for Kaanapali and Glymur Platforms
dt-bindings: mailbox: qcom: Add CPUCP mailbox controller bindings for Kaanapali
arm64: dts: qcom: lemans: enable static TPDM
arm64: dts: qcom: kodiak: Add memory region for audiopd
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
arm64: dts: qcom: x1e: bus is 40-bits (fix 64GB models)
arm64: dts: qcom: lemans; Add EL2 overlay
arm64: dts: qcom: sm8150: add uart13
arm64: dts: qcom: sdm845-db845c: specify power for WiFi CH1
arm64: dts: qcom: sdm845-db845c: drop CS from SPIO0
arm64: dts: qcom: qrb4210-rb2: Fix UART3 wakeup IRQ storm
arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype
arm64: dts: qcom: qcs8300: Add GPU cooling
arm64: dts: qcom: sa8775p: Add reg and clocks for QoS configuration
arm64: dts: qcom: hamoa-iot-evk: Enable TPM (ST33) on SPI11
arm64: dts: qcom: talos: Add PMU support
arm64: dts: qcom: talos: switch to interrupt-cells 4 to add PPI partitions
arm64: dts: qcom: ipq9574: Complete USB DWC3 wrapper interrupts
arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts
arm64: dts: qcom: monaco: Add CTCU and ETR nodes
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge DT binding headers from topic branch, used by the driver.
|
|
Add dt schema documentation and clock IDs for the Display Process Unit
(DPU) clock management unit (CMU). This CMU feeds IPs such as image scaler,
enhancer and compressor.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260113-dpu-clocks-v3-2-cb85424f2c72@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Renesas RZ/T2H and RZ/N2H PCLKCAN Clock DT Binding Definitions
PCLKCAN Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Renesas RZ/T2H and RZ/N2H PCLKCAN Clock DT Binding Definitions
PCLKCAN Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077)
and RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Add compatible strings for clock drivers to support Spacemit K3 SoC,
also includes all the defined clock IDs.
The SpacemiT K3 SoC clock IP is scattered over several different blocks,
which are APBC, APBS, APMU, DCIU, MPMU, all of them are capable of
generating clock and reset signals. APMU and MPMU have additional Power
Domain management functionality.
Following is a brief list that shows devices managed in each block:
APBC: UART, GPIO, PWM, SPI, TIMER, I2S, IR, DR, TSEN, IPC, CAN
APBS: various PPL clocks control
APMU: CCI, CPU, CSI, ISP, LCD, USB, QSPI, DMA, VPU, GPU, DSI, PCIe, EMAC..
DCID: SRAM, DMA, TCM
MPMU: various PLL1 derived clocks, UART, WATCHDOG, I2S
Link: https://lore.kernel.org/r/20260108-k3-clk-v5-1-42a11b74ad58@gentoo.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
Add PCLKCAN ID for CANFD to both R9A09G077 and R9A09G087 SoCs.
This definition is required for describing CANFD device in DT.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251224165049.3384870-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
into clk-for-6.20
Merge the Kaanapali camera, display, GPU, and video clock controller
bindings through a topic branch, to allow making them available to the
DeviceTree branch as well.
|
|
Qualcomm GX(graphics) is a clock controller which has PLLs, clocks and
Power domains (GDSC), but the requirement from the SW driver is to use
the GDSC power domain from the clock controller to recover the GPU
firmware in case of any failure/hangs. The rest of the resources of the
clock controller are being used by the firmware of GPU. This module
exposes the GDSC power domains which helps the recovery of Graphics
subsystem.
Add bindings documentation for the Kaanapali Graphics Clock and Graphics
power domain Controller for Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-7-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree bindings for the video clock controller on Qualcomm
Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-6-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Update the compatible and the bindings for CAMCC support on Kaanapali
SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-5-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Document device tree bindings for display clock controller for
Qualcomm Kaanapali SoC.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-kaanapali-mmcc-v3-v3-4-8e10adc236a8@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
clk-for-6.20
Merge the SM8750 camera clock controller binding through a topic branch,
in order to allow the defines to made availabe to the DeviceTree
branch as well.
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM8750 platform. The camera clock controller is split between
camcc and cambist. The cambist controls the mclks of the camera clock
controller.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251202-sm8750_camcc-v1-2-b3f7ef6723f1@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add devicetree bindings for the global clock controller on Qualcomm
MSM8940 platform.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20251117-gcc-msm8940-sdm439-v2-1-4af57c8bc7eb@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
'20251117-mdss-resets-msm8917-msm8937-v2-1-a7e9bbdaac96@mainlining.org' into HEAD
Merge the addition of MDSS reset to the MSM8917 GCC binding, in order to
get access to the introduced constant.
|
|
into clk-for-6.20
Merge the addition of missing UFS PHY clocks in Hamoa GCC binding
through topic branch, to allow it to be merged into DeviceTree branch as
well.
|
|
Add some of the UFS symbol rx/tx muxes were not initially described.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260103-ufs_symbol_clk-v2-1-51828cc76236@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add definition for MDSS reset can be found on MSM8917 and MSM8937.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251117-mdss-resets-msm8917-msm8937-v2-1-a7e9bbdaac96@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add device tree clock binding definitions for CMU_MFD
Signed-off-by: Raghav Sharma <raghav.s@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251119114744.1914416-2-raghav.s@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add binding ID for C910 bus clock, which takes CLK_C910 as parent and is
essential for C910 cluster's operation.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
Renesas RZ/T2H and RZ/N2H XSPI Clock DT Binding Definitions
XSPI Clock DT binding definitions for the Renesas RZ/T2H (R9A09G077) and
RZ/N2H (R9A09G087) SoCs, shared by driver and DT source files.
|
|
Add indices for video encoder, demodulator and CVBS clocks.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
Link: https://lore.kernel.org/r/20250919-add_video_clk-v6-1-fe223161fb3f@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the peripheral clock controller of the Amlogic T7
SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212022619.3072132-4-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the SCMI clock controller of the Amlogic T7 SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251212022619.3072132-3-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
Add DT bindings for the PLL clock controller of the Amlogic T7 SoC family.
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20251212022619.3072132-2-jian.hu@amlogic.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
|
|
and 'clk-qcom' into clk-next
* clk-visconti:
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
* clk-imx:
clk: imx: add driver for imx8ulp's sim lpav
dt-bindings: clock: document 8ULP's SIM LPAV
clk: imx: imx8mp-audiomix: use devm_auxiliary_device_create() to simple code
clk: imx: Add some delay before deassert the reset
* clk-microchip:
reset: mpfs: add non-auxiliary bus probing
clk: lan966x: remove unused dt-bindings include
clk: microchip: mpfs: use regmap for clocks
dt-bindings: clk: microchip: mpfs: remove first reg region
* clk-rockchip:
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
dt-bindings: clock: rk3568: Drop CLK_NR_CLKS define
clk: rockchip: rk3568: Drop CLK_NR_CLKS usage
dt-bindings: clock: rk3568: Add SCMI clock ids
* clk-qcom: (48 commits)
clk: qcom: Mark camcc_sm7150_hws static
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
clk: qcom: ecpricc-qdu100: Add mem_enable_mask to the clock memory branch
clk: qcom: clk_mem_branch: add enable mask and invert flags
clk: qcom: mmcc-sdm660: Add missing MDSS reset
dt-bindings: clock: mmcc-sdm660: Add missing MDSS reset
clk: qcom: use different Kconfig prompts for APSS IPQ5424/6018 drivers
clk: qcom: apss-ipq5424: remove unused 'apss_clk' structure
dt-bindings: clock: qcom: Add Kaanapali Global clock controller
dt-bindings: clock: qcom: Document the Kaanapali TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add RPMHCC for Kaanapali
clk: qcom: tcsrcc-glymur: Update register offsets for clock refs
clk: qcom: gcc-qcs615: Update the SDCC clock to use shared_floor_ops
clk: qcom: camcc-sm7150: Fix PLL config of PLL2
clk: qcom: camcc-sm6350: Fix PLL config of PLL2
clk: qcom: Add NSS clock controller driver for IPQ5424
...
|
|
and 'clk-mediatek' into clk-next
* clk-socfpga:
clk: socfpga: agilex5: add clock driver for Agilex5
* clk-renesas: (35 commits)
clk: renesas: r9a09g077: Add SPI module clocks
clk: renesas: r9a09g056: Add USB3.0 clocks/resets
clk: renesas: r9a09g057: Add USB3.0 clocks/resets
clk: renesas: r9a09g047: Add RSCI clocks/resets
dt-bindings: clock: renesas,r9a09g056-cpg: Add USB3.0 core clocks
dt-bindings: clock: renesas,r9a09g057-cpg: Add USB3.0 core clocks
clk: renesas: r9a06g032: Fix memory leak in error path
clk: renesas: r9a09g077: Use devm_ helpers for divider clock registration
clk: renesas: r9a09g077: Remove stray blank line
clk: renesas: r9a09g077: Propagate rate changes to parent clocks
clk: renesas: r8a779a0: Add 3DGE module clock
clk: renesas: r8a779a0: Add ZG Core clock
clk: renesas: rcar-gen4: Add support for clock dividers in FRQCRB
dt-bindings: clock: r8a779a0: Add ZG core clock
clk: renesas: r9a09g056: Add clock and reset entries for ISP
clk: renesas: r9a09g056: Add support for PLLVDO, CRU clocks, and resets
clk: renesas: r9a09g056: Add clocks and resets for DSI and LCDC modules
clk: renesas: r9a09g077: Add TSU module clock
clk: renesas: r9a09g057: Add clock and reset entries for DSI and LCDC
clk: renesas: rzv2h: Add support for DSI clocks
...
* clk-cleanup:
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: spacemit: fix comment typo
clk: keystone: Fix discarded const qualifiers
clk: sprd: sc9860: Simplify with of_device_get_match_data()
* clk-samsung:
firmware: exynos-acpm: add empty method to allow compile test
MAINTAINERS: add ACPM clock bindings and driver
clk: samsung: add Exynos ACPM clock driver
firmware: exynos-acpm: register ACPM clocks pdev
firmware: exynos-acpm: add DVFS protocol
dt-bindings: firmware: google,gs101-acpm-ipc: add ACPM clocks
clk: samsung: clk-pll: simplify samsung_pll_lock_wait()
clk: samsung: exynosautov920: add block mfc clock support
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add mfc clock definitions
dt-bindings: clock: exynosautov920: add m2m clock definitions
dt-bindings: clock: google,gs101-clock: add power-domains
* clk-mediatek:
clk: en7523: Add reset-controller support for EN7523 SoC
dt-bindings: clock: airoha: Add reset support to EN7523 clock binding
|
|
Add clock definitions for XSPI0/1 to both R9A09G077 and R9A09G087 SoCs.
These definitions are required for describing XSPI devices in DT
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251028165127.991351-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device tree bindings for clock and reset unit on RK3506 SoC.
Add clock and reset IDs for RK3506 SoC.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251121075350.2564860-2-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add clock and reset identifiers for the Video Input Interface.
These identifiers support two instances: VIIF0 and VIIF1.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Remove the definitions of number of clocks from bindings because they
prevent adding new clocks. Since the previous patch removed all refereces
within the driver, they can now be deleted.
The same for resets and plls.
Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clock and reset ID defines for rv1126b.
Also add documentation for the rv1126b CRU core.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251111025738.869847-3-zhangqing@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The router link clock branches also feature some reset logic, which is
required to properly power sequence the hardware for DP tunneling over
USB4.
Describe these missing resets.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251118-topic-usb4_x1e_dispcc-v1-1-14c68d842c71@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add compatible string for SM8750 video clock controller and the bindings
for SM8750 Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20251118-sm8750-videocc-v2-v4-4-049882a70c9f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add definition for display subsystem reset control, so display
driver can reset display controller properly, clearing any
configuration left there by bootloader. Since 6.17 after
PM domains rework it became necessary for display to function.
Fixes: 0e789b491ba0 ("pmdomain: core: Leave powered-on genpds on until sync_state")
Cc: stable@vger.kernel.org # 6.17
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20251116-sdm660-mdss-reset-v2-1-6219bec0a97f@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung
Pull more Samsung clk driver updates from Krzysztof Kozlowski:
- ExynosAutov920: add support for additional clock controllers (M2M and
MFC)
* tag 'samsung-clk-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: clk-pll: simplify samsung_pll_lock_wait()
clk: samsung: exynosautov920: add block mfc clock support
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add mfc clock definitions
dt-bindings: clock: exynosautov920: add m2m clock definitions
dt-bindings: clock: google,gs101-clock: add power-domains
|
|
Renesas RZ/V2N and RZ/V2H USB3.0 Core Clock DT Binding Definitions
USB3.0 core clock DT binding definitions for the Renesas RZ/V2N
(R9A09G056) and RZ/V2H (R9A09G057) SoCs, shared by driver and DT source
files.
|
|
Add definitions for USB3.0 core clocks in the R9A09G056 CPG DT bindings
header file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251101050034.738807-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add definitions for USB3.0 core clocks in the R9A09G057 CPG DT bindings
header file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251101050034.738807-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add documentation for i.MX8ULP's SIM LPAV module.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Link: https://lore.kernel.org/r/20251104120301.913-3-laurentiumihalcea111@gmail.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
|
|
Renesas R-Car V3U Graphics Clock DT Binding Definition
Graphics Clock DT binding definition for the Renesas R-Car V3U
(R8A779A0) SoC, shared by driver and DT source files.
|
|
Add the core clock used by the GPU on the Renesas R-Car V3U
(R8A779A0) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251106211604.2766465-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
CLK_NR_CLKS has always only be used on the driver side to calculate array
sizes should never have been part of the clock-binding.
Let's drop it, since the kernel code no longer uses it either and nothing
else has ever used it.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251103234032.413563-3-heiko@sntech.de
|
|
The Trusted Firmware on RK3568 exposes 3 clocks via the SCMI clock
interface. Add descriptive IDs for them.
The clock ids are used in both the older vendor-binary TF-A, as well
as the recently merged upstream SCMI clock implementation.
Link: https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/31265
Reviewed-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251103234926.416137-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
into clk-for-6.19
Merge Kaanapali RPMh, TCSR and global clock controllers through a topic
branch, so they can be made available in the DeviceTree branch as well.
|
|
Add device tree bindings for the global clock controller on Qualcomm
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251030-gcc_kaanapali-v2-v2-3-a774a587af6f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
into clk-for-6.19
Merge binding changes for IPQ5424 network subsystem clock controllers
through topic branch, to make them available for DeviceTree branch as
well.
|