summaryrefslogtreecommitdiff
path: root/include/linux/host1x.h
AgeCommit message (Collapse)Author
2015-04-02gpu: host1x: Export host1x_syncpt_read()Thierry Reding
This function is used to read the current value of the syncpt and is useful in situations where drivers don't schedule work and wait for the syncpoint to increment. One particular use-case is using the syncpoint as a VBLANK counter. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-27gpu: host1x: Provide a proper struct bus_typeThierry Reding
Previously the struct bus_type exported by the host1x infrastructure was only a very basic skeleton. Turn that implementation into a more full- fledged bus to support proper probe ordering and power management. Note that the bus infrastructure needs to be available before any of the drivers can be registered. This is automatically ensured if all drivers are built as loadable modules (via symbol dependencies). If all drivers are built-in there are no such guarantees and the link order determines the initcall ordering. Adjust drivers/gpu/Makefile to make sure that the host1x bus infrastructure is initialized prior to any of its users (only drm/tegra currently). v2: Fix building host1x and tegra-drm as modules Reported-by: Dave Airlie <airlied@gmail.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Mark Zhang <markz@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-01-23gpu: host1x: Call ->remove() only when a device is boundThierry Reding
When a driver's ->probe() function fails, the host1x bus must not call its ->remove() function because the driver will already have cleaned up in the error handling path in ->probe(). Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-04drm/tegra: Make job submission 64-bit safeThierry Reding
Job submission currently relies on the fact that struct drm_tegra_reloc and struct host1x_reloc are the same size and uses a simple call to the copy_from_user() function to copy them to kernel space. This causes the handle to be stored in the buffer object field, which then needs a cast to a 32 bit integer to resolve it to a proper buffer object pointer and store it back in the buffer object field. On 64-bit architectures that will no longer work, since pointers are 64 bits wide whereas handles will remain 32 bits. This causes the sizes of both structures to because different and copying will no longer work. Fix this by adding a new function, host1x_reloc_get_user(), that copies the structures field by field. While at it, use substructures for the command and target buffers in struct host1x_reloc for better readability. Also use unsized types to make it more obvious that this isn't part of userspace ABI. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-04gpu: host1x: export host1x_syncpt_incr_max() functionBryan Wu
Tegra V4L2 camera driver needs this function to do frame capture. Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-12-19gpu: host1x: Add MIPI pad calibration supportThierry Reding
This driver adds support to perform calibration of the MIPI pads for CSI and DSI. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31gpu: host1x: Add syncpoint base supportArto Merilainen
This patch adds support for hardware syncpoint bases. This creates a simple mechanism to stall the command FIFO until an operation is completed. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31gpu: host1x: Add 'flags' field to syncpt requestArto Merilainen
Functions host1x_syncpt_request() and _host1x_syncpt_alloc() have been taking a separate boolean flag ('client_managed') for indicating if the syncpoint value should be tracked by the host1x driver. This patch converts the field into generic 'flags' field so that we can easily add more information while requesting a syncpoint. Clients are adapted to use the new interface accordingly. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31drm/tegra: Add 3D supportThierry Reding
Initialize and power the 3D unit on Tegra20, Tegra30 and Tegra114 and register a channel with the Tegra DRM driver so that the unit can be used from userspace. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31drm/tegra: Move subdevice infrastructure to host1xThierry Reding
The Tegra DRM driver currently uses some infrastructure to defer the DRM core initialization until all required devices have registered. The same infrastructure can potentially be used by any other driver that requires more than a single sub-device of the host1x module. Make the infrastructure more generic and keep only the DRM specific code in the DRM part of the driver. Eventually this will make it easy to move the DRM driver part back to the DRM subsystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31gpu: host1x: Expose syncpt and channel functionalityThierry Reding
Expose the buffer objects, syncpoint and channel functionality in the public public header so that drivers can use them. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31drm/tegra: Introduce tegra_drm_client structureThierry Reding
This structure derives from host1x_client. DRM-specific fields are moved from host1x_client to this structure, so that host1x_client can remain agnostic of DRM. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-10-31gpu: host1x: Make host1x header file publicThierry Reding
In preparation to support host1x clients other than DRM, move this header into a public location. Signed-off-by: Thierry Reding <treding@nvidia.com>