summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2012-07-03ENGR00176649-1 sabrelite_SD ARD pfuze: update pfuze driver for pfuze100 1.0Robin Gong
Since some power rail is differnet between pfuze100 0.1 and pfuze100 1.0, remove PFUZE100_FIRST_VERSION and change PFUZE100_SW4_VOL6 define. Signed-off-by: Robin Gong <b38343@freescale.com>
2012-07-03ENGR00173964 make hdmi audio init dependent on hdmi video initAlan Tull
Don't show hdmi as an audio playback device if hdmi isn't configured on the command line. Signed-off-by: Alan Tull <r80115@freescale.com>
2012-07-03ENGR00172342-2 EDID parse audio data blocksAlan Tull
Add functionality to parse Audio Data Blocks from EDID data to find out what modes of LPCM are suppored by the HDMI sink device. The parsed settings are saved in the hdmi mfd. The HDMI audio driver will check the settings when the audio stream is opened and will then apply appropriate constraints. If we are unable to read from the EDID, then we default to supporting Basic Audio as defined by the HDMI specification (stereo, 16 bit, 32KHz, 44.1KHz, 48KHz PCM). Signed-off-by: Alan Tull <r80115@freescale.com>
2012-07-03ENGR00172752-2 Remove usless code in pfuze100 regulator driverNancy Chen
Remove usless code in pfuze100 regulator driver Signed-off-by: Robin Gong <b38343@freescale.com> Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>
2012-07-03ENGR00171001-2 MX6Q PFUZE100: fix build warningsRobin Gong
fix build warnings on pfuze driver: arch/arm/mach-mx6/mx6q_sabreauto_pmic_pfuze100.c:388: warning: initialization from incompatible pointer type drivers/mfd/pfuze-core.c:523: warning: initialization from incompatible pointer type drivers/mfd/pfuze-core.c:412: warning: 'pfuze_add_subdevice' defined but not used Signed-off-by: Robin Gong <B38343@freescale.com>
2012-07-03ENGR00170255-2 MX6Q PFUZE100: add pfuze100 driverRobin Gong
add pfuze core driver for mx6 Signed-off-by: Robin Gong <B38343@freescale.com>
2012-07-03ENGR00169872-2 rework hdmi initialization and hotplug sequenceAlan Tull
This commit intends to implement the flowchart and details documented in the HDMI Transmitter Controller User Guide section entitled "Programming Model". Some input is also from the Synopsys API code. The HDMI specification requires HDMI to set itself to VGA DVI mode before reading the EDID. So follow this sequence when HDMI is hotplugged: 1. Hdmi connector is plugged in, HDMI video gets an interrupt. 2. Clear out video mode list. Add only VGA DVI mode to list. 3. Request VGA DVI mode (call fb_set_var()) 4. HDMI video driver will get FB_EVENT_MODE_CHANGE callback and call mxc_hdmi_setup() to set up HDMI. 5. Read the edid and add video modes from edid. Select the video mode that is similar to the command line default. 6. Request VGA DVI mode (call fb_set_var()) 7. HDMI video driver will get FB_EVENT_MODE_CHANGE callback and do mxc_hdmi_setup(). Also included is a workaround for an overflow condition in the HDMI. The frame composer has an arithmetic unit that gets updated every time we write to one of the FC registers. But sometimes, depending on the relation between the tmds and sfr clocks, it may happen that this unit doesn't get updated, even though the registers are holding correct values. The workaround for this is, after completing the controller configuration, to rewrite one of the FC registers (i.e. FC_INVIDCONF) three or four times with the same value, and then follow it up by a SW reset to the TMDS clock domain (MC_SWRSTZ). We clear the overflow condition as described above every time we change video mode. Also an overflow interupt handler will clear the overflow condition if it happens again. This overflow condition is expected (and not a problem) when we are in DVI (non-HDMI) mode, so we do not worry about it in that case. Signed-off-by: Alan Tull <alan.tull@freescale.com>
2012-07-03ENGR00143921-1 - EPDC/MAX17135: Add controls for V3P3 regulatorDanny Nold
- Added V3P3 regulator to max17135 - Added calls to enable/disable V3P3 regulator from EPDC driver - Improved Kconfig detail for max17135 MFD and HWMON entries Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-07-03ENGR00160860-2 hdmi audio driverAlan Tull
Audio driver for i.Mx built-in HDMI Transmitter. * Uses HDMI Transmitter's built-in DMA. * Adds IEC958-style digital audio header info to the raw audio. * Gets pixel clock from the IPU driver and calculates clock regenerator values (cts and N). * Move ipu_id, and disp_id from the HDMI's platform data to the HDMI mfd's platform data. Saves them in the hdmi mfd. * Add mfd functionality to update the clock regenerator values when the hdmi changes the pixel clock rate or when requested from the audio driver with a new audio sample rate. Signed-off-by: Alan Tull <alan.tull@freescale.com>
2012-07-03ENGR00159530-1 mc34708: add new pmic core driver based on MFDRobin Gong
add new mc34708's core driver based on MFD Signed-off-by: Robin Gong <B38343@freescale.com>
2012-07-03ENGR00160061 - MXC HDMI: Optimize HDMI clock managementDanny Nold
- Ensure HDMI clocks are disabled when leaving HDMI core probe function. - Create HDMI core api to allow HDMI sub-drivers to init, enable, and disable the HDMI IRQ. Required to optimally manage HDMI clocks, allow IAHB to be disabled, and still have video and audio sub-drivers able to receive interrupts. - Update code to adjust for decoupled ISFR and IAHB clocks. - Disable IAHB clocks whenever HDMI not plugged in. Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-07-03ENGR00155845-1 mfd for hdmiAlan Tull
This is a mfd for the internal HDMI Transmitter on i.Mx. It handles resources that are shared by the seperate video and audio drivers. Signed-off-by: Alan Tull <alan.tull@freescale.com>
2012-07-03ENGR00142950-2 - MAX17135 EPD PMIC: Ported to 2.6.38 kernelDanny Nold
- Ported MAX17135 MFD core driver to 2.6.38 - Ported MAX17135 HWMON temperature sensor driver to 2.6.38 - Ported MAX17135 regulator driver to 2.6.38 Signed-off-by: Danny Nold <dannynold@freescale.com>
2012-07-03ENGR00141395-1 include: PMIC: porting mc13892 driver to 2.6.38Zhou Jingyu
add some missing headers Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com>
2012-07-03ENGR00141391-2 PMIC: porting da9053 to i.mx platformZhou Jingyu
Fix da9053 backlight Kconfig error porting da9052 regulator driver Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2012-07-03ENGR00141391-1 PMIC: Add DA9053 source code from DialogZhou Jingyu
Add DA9053 original source code Signed-off-by: Zhou Jingyu <Jingyu.Zhou@freescale.com> Acked-by: Lily Zhang <r58066@freescale.com>
2011-10-03mfd: Fix value of WM8994_CONFIGURE_GPIOMark Brown
commit 8efcc57dedfebc99c3cd39564e3fc47cd1a24b75 upstream. This needs to be an out of band value for the register and on this device registers are 16 bit so we must shift left one to the 17th bit. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-08w1: ds1wm: add a reset recovery parameterJean-François Dagenais
This fixes a regression in 3.0 reported by Paul Parsons regarding the removal of the msleep(1) in the ds1wm_reset() function: : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying" : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270): : : <snip> : Driver for 1-wire Dallas network protocol. : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko : 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko : ds1wm ds1wm: pass: 1 bus error, retrying : ds1wm ds1wm: pass: 2 bus error, retrying : ds1wm ds1wm: pass: 3 bus error, retrying : ds1wm ds1wm: pass: 4 bus error, retrying : ds1wm ds1wm: pass: 5 bus error, retrying : ... : : The visible result is that the battery charging LED is erratic; sometimes : it works, mostly it doesn't. : : The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1, : 3.0-rc2, or 3.0-rc3. This sleep should not be required on normal circuitry provided the pull-ups on the bus are correctly adapted to the slaves. Unfortunately, this is not always the case. The sleep is restored but as a parameter to the probe function in the pdata. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-27TPS65911: Comparator: Add comparator driverJorge Eduardo Candelaria
This driver adds functionality to the tps65911 chip driver. Two of the comparators are configurable by software and measures VCCS voltage to detect high or low voltage scenarios. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65911: Add support for added GPIO linesJorge Eduardo Candelaria
GPIO 1 to 8 are added for TPS65911 chip version. The gpio driver now handles more than one gpio lines. Subsequent versions of the chip family can add new GPIO lines with minimal driver changes. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65911: Add new irq definitionsJorge Eduardo Candelaria
TPS65911 adds new interrupt sources, as well as two new registers to handle them, one for interrupt status and one for interrupt masking. The added irqs are: -VMBCH2 - Low and High threshold -GPIO1-8 - Rising and falling edge detection -WTCHDG - Watchdog interrupt -PWRDN - PWRDN reset interrupt The code should handle these new registers only when the chip version is TPS65911. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27regulator: tps65911: Add new chip versionJorge Eduardo Candelaria
The tps65911 chip introduces new features, including changes in the regulator module. - VDD1 and VDD2 remain unchanged. - VDD3 is now named VDDCTRL and has a wider voltage range. - LDOs are now named LDO1...8 and voltage ranges are sequential, making LDOs easier to handle. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27MFD: TPS65910: Add support for TPS65911 deviceJorge Eduardo Candelaria
The TPS65911 is the next generation of the TPS65910 family of PMIC chips. It adds a few features: - Watchdog Timer - PWM & LED generators - Comparators for system control status It also adds a set of Interrupts and GPIOs, among other things. The driver exports a function to identify between different versions of the tps65910 family, allowing other modules to identify the capabilities of the current chip. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27regulator: Remove ↵Axel Lin
MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros In current implementation, the original macro implementation assumes the caller pass the parameter starting from 1 (to match the register names in datasheet). Thus we have unneeded plus one then minus one operations when using MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros. This patch removes these macros to avoid unneeded plus one then minus one operations without reducing readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65910: Add tps65910 regulator driverGraeme Gregory
The regulator module consists of 3 DCDCs and 8 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65910: IRQ: Add interrupt controllerGraeme Gregory
This module controls the interrupt handling for the tps chip. The interrupt sources are the following: - GPIO falling/rising edge detection - Battery voltage below/above threshold - PWRON signal - PWRHOLD signal - Temperature detection - RTC alarm and periodic event Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65910: GPIO: Add GPIO driverGraeme Gregory
TPS65910 has one configurable GPIO that can be used for several purposes. Subsequent versions of the TPS chip support more than one GPIO. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27MFD: TPS65910: Add new mfd device for TPS65910Graeme Gregory
The TPS65910 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - GPIO controller - RTC The tps65910 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-26mfd: Fix ASIC3 SD Host Controller Configuration sizePaul Parsons
The size of the TC6380AF SD Host Controller Configuration area is 0x200 bytes (assuming registers are aligned on 32-bit boundaries), not 0x400 bytes. Source: Toshiba TC6380AF Specification sections 4.2 and 4.3.1 Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26leds: Add ASIC3 LED supportPaul Parsons
Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Update twl4030-code maintainer e-mail addressPeter Ujfalusi
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide ab8500-core enumerators for chip cutsLinus Walleij
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add rtc support to 88pm860xHaojian Zhuang
Enable rtc function in 88pm860x PMIC. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add pm8xxx irq supportAbhijeet Dharmapurikar
Add support for the irq controller in Qualcomm 8xxx pmic. The 8xxx interrupt controller provides control for gpio and mpp configured as interrupts in addition to other subdevice interrupts. The interrupt controller also provides a way to read the real time status of an interrupt. This real time status is the only way one can get the input values of gpio and mpp lines. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add Qualcomm PMIC 8921 core driverAbhijeet Dharmapurikar
Add support for the Qualcomm PM8921 PMIC chip. The core driver will communicate with the PMIC chip via the MSM SSBI bus. Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide platform data for WM831x GPIO configurationMark Brown
Allow the GPIO mode of WM831x devices to be configured using platform data. Users may provide a table of GPIO register values in gpio_defaults[]. In order to allow 0 to be set explicitly out of range values are accepted and masked off, with a WM831X_GPIO_CONFIGURE define provided to set an out of range value. This can be used to configure higher numbered GPIOs or override values set in OTP for GPIOs configured using OTP. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove compatibility interface for WM831x specific IRQ APIMark Brown
The last user was removed in the merge window. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Remove mfd_dataSamuel Ortiz
Cell pointers are passed through device->mfd_cell and platform data is passed through the MFD cell platform_data pointer. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Use mfd cell platform_data for ab3550 cells platform bitsSamuel Ortiz
With the addition of a platform device mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Add platform data pointer backSamuel Ortiz
Now that we have a way to pass MFD cells down to the sub drivers, we can gradually get rid of mfd_data by putting the platform pointer back in place. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (75 commits) mmc: core: eMMC bus width may not work on all platforms mmc: sdhci: Auto-CMD23 fixes. mmc: sdhci: Auto-CMD23 support. mmc: core: Block CMD23 support for UHS104/SDXC cards. mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. mmc: core: Use CMD23 for multiblock transfers when we can. mmc: quirks: Add/remove quirks conditional support. mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver mmc: sdhci-pxa: Add quirks for DMA/ADMA to match h/w mmc: core: duplicated trial with same freq in mmc_rescan_try_freq() mmc: core: add support for eMMC Dual Data Rate mmc: core: eMMC signal voltage does not use CMD11 mmc: sdhci-pxa: add platform code for UHS signaling mmc: sdhci: add hooks for setting UHS in platform specific code mmc: core: clear MMC_PM_KEEP_POWER flag on resume mmc: dw_mmc: fixed wrong regulator_enable in suspend/resume mmc: sdhi: allow powering down controller with no card inserted mmc: tmio: runtime suspend the controller, where possible mmc: sdhi: support up to 3 interrupt sources mmc: sdhi: print physical base address and clock rate ...
2011-05-24mmc: tmio: runtime suspend the controller, where possibleGuennadi Liakhovetski
The TMIO MMC controller cannot be powered off to save power, when no card is plugged in, because then it will not be able to detect a new card-insertion event. On some implementations, however, it is possible to switch to using another source to detect card insertion. This patch adds support for such implementations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-24mfd: add DB5500 PRCMU driverLinus Walleij
This adds the DB5500 PRCMU driver. Right now this one is pretty restricted in functionality, exposing a simple interface to send I2C messages. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mfd: update DB8500 PRCMU driverMattias Nilsson
This updates the DB8500 PRCMU driver to the latest version available internally. Nominally we would update the dependent CPUfreq driver at the same time but since that is being moved around in this patch set we postpone that by simply deactivating it for the time being. This is a snapshot of the current PRCMU firmware API as it looks right now. The PRCMU firmware is still subject to change. This also updates the CPUfreq driver to a newer version that will utilize the new API. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Per Fransson <per.xx.fransson@stericsson.com> Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Sebastien Rault <sebastien.rault@stericsson.com> Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24mach-ux500: move the DB8500 PRCMU driver to MFDLinus Walleij
We have decided that this function arbiter fits better in the MFD subsystem. Since we need to concatenate the split header files we move it basically like this: mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h rm arch/arm/mach-ux500/include/mach/prcmu.h Then we update different #include statements and Makefile orders etc to make the PRCMU driver compile, link and boot in the new place without really changing any code. Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-22Merge branch 'topic/asoc' into for-linusTakashi Iwai
2011-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wm831x-ts - move BTN_TOUCH reporting to data transfer Input: wm831x-ts - allow IRQ flags to be specified Input: wm831x-ts - fix races with IRQ management
2011-04-27Input: wm831x-ts - allow IRQ flags to be specifiedMark Brown
This allows maximum flexibility for configuring the direct GPIO based interrupts. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-04-18ASoC: Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
Fix trivial conflict caused by silly spelling fix patch. Conflicts: sound/soc/codecs/wm8994.c
2011-04-12mfd: Fetch cell pointer from platform_device->mfd_cellSamuel Ortiz
In order for MFD drivers to fetch their cell pointer but also their platform data one, an mfd cell pointer is added to the platform_device structure. That allows all MFD sub devices drivers to be MFD agnostic, unless they really need to access their MFD cell data. Most of them don't, especially the ones for IPs used by both MFD and non MFD SoCs. Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg KH <gregkh@suse.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-11-24 15:59:05 +0000