summaryrefslogtreecommitdiff
path: root/include/linux/mfd
AgeCommit message (Collapse)Author
2014-10-11Merge tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Fix SDIO IRQ bug - MMC regulator improvements - Fix slot-gpio card detect bug - Add support for Driver Stage Register - Convert the common MMC OF parser to use GPIO descriptors - Convert MMC_CAP2_NO_MULTI_READ into a callback, ->multi_io_quirk() - Some additional minor fixes MMC host: - mmci: Support Qualcomm specific DML layer for DMA - dw_mmc: Use common MMC regulators - dw_mmc: Add support for Rock-chips RK3288 - tmio: Enable runtime PM support - tmio: Add support for R-Car Gen2 SoCs - tmio: Several fixes and improvements - omap_hsmmc: Removed Balaji from MAINTAINERS - jz4740: add DMA and pre/post support - sdhci: Add support for Intel Braswell - sdhci: Several fixes and improvements" * tag 'mmc-v3.18-1' of git://git.linaro.org/people/ulf.hansson/mmc: (119 commits) ARM: dts: fix MMC2 regulators for Exynos5420 Arndale Octa board mmc: sdhci-acpi: Fix Braswell eMMC timeout clock frequency mmc: sdhci-acpi: Pass HID and UID to probe_slot mmc: sdhci-acpi: Get UID directly from acpi_device mmc, sdhci, bcm-kona, LLVMLinux: Remove use of __initconst mmc: sdhci-pci: Fix Braswell eMMC timeout clock frequency mmc: sdhci: Let a driver override timeout clock frequency mmc: sdhci-pci: Add Bay Trail and Braswell SD card detect mmc: sdhci-pci: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel BYT host controllers mmc: sdhci-acpi: Add a HID and UID for a SD Card host controller mmc: sdhci-acpi: Set SDHCI_QUIRK2_STOP_WITH_TC for Intel host controllers mmc: sdhci: Add quirk for always getting TC with stop cmd mmc: core: restore detect line inversion semantics mmc: Fix incorrect warning when setting 0 Hz via debugfs mmc: Fix use of wrong device in mmc_gpiod_free_cd() mmc: atmel-mci: fix mismatched section on atmci_cleanup_slot mmc: rtsx_pci: Set power related cap2 macros mmc: core: Add new power_mode MMC_POWER_UNDEFINED mmc: sdhci: execute tuning when device is not busy mmc: atmel-mci: Release mmc resources on failure in probe ..
2014-10-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "A few new haptic/button drivers, a rudimentary support for laptops using FocalTech touchpads; xpad driver will bind to more devices, and a few other driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - convert to platform bus Input: palmas-pwrbutton - fix typo in the license string Input: palmas-pwrbutton - use IRQF_ONESHOT Input: psmouse - add support for detecting FocalTech PS/2 touchpads Input: psmouse - add psmouse_matches_pnp_id helper function Input: joystick - use ktime for measuring timing Input: add haptic driver on max77693 Input: introduce palmas-pwrbutton Input: add support for the DRV2667 haptic driver Input: xpad - sync device IDs with xboxdrv Input: xpad - add VID/PID for Razer Sabertooth Input: cros_ec_keyb - optimize ghosting algorithm Input: drv260x - fix binding document Input: drv260x - add check for ERM mode and LRA Libraries Input: drv260x - remove unused defines Input: drv260x - add TI drv260x haptics driver
2014-09-11Input: add haptic driver on max77693Jaewon Kim
This driver to supports the haptic controller on MAX77693 Multifunction device with PMIC, CHARGER, LED, MUIC, HAPTIC. This driver supports external pwm and LRA (Linear Resonant Actuator) motor. User can control the haptic device via force feedback framework. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-09-09mmc: use .multi_io_quirk on tmio_mmcKuninori Morimoto
Now, tmio_mmc can use .multi_io_quirk callback instead of MMC_CAP2_NO_MULTI_READ flags. let's use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: tmio: add actual clock support as optionShinobu Uehara
Some controller is supporting actual clock on SD_CLK_CTRL :: DIV[7:0]. Renesas SH-Mobile SDHI doesn't support, but, Renesas R-Car SDHI supports it. This patch adds new TMIO_MMC_CLK_ACTUAL flag for it. [Kuninori Morimoto: tidyuped for upstreaming] Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: tmio: remove Renesas specific #ifdefKuninori Morimoto
This patch adds new TMIO_MMC_HAVE_CTL_DMA_REG flag, and remove Renesas specific #ifdef from tmio driver Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: tmio: add TMIO_MMC_SDIO_STATUS_QUIRKShinobu Uehara
Renesas R-Car SDHI should set reserved bits on CTL_SDIO_STATUS register when writing. This patch adds new TMIO_MMC_SDIO_STATUS_QUIRK flags for this purpose [Kuninori Morimoto: tidyuped for upstreaming enabled this flags for all SH-Mobile/R-Car] Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: tmio: control multiple block transfer modeShinobu Uehara
Renesas SDHI has "Multiple Block Transfer Mode" settings on SD_CMD register which controls CMD12 automatically. This patch cares it, because CMD12 is not needed when CMD53 (= SD_IO_RW_EXTENDED) [Kuninori Morimoto: tidyuped for upstreaming enabled this flags for all SH-Mobile/R-Car] Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-09-09mmc: tmio: care about DMA tx/rx addr offsetKuninori Morimoto
Basically, SD_BUF0 Tx/Rx addresses are same in normal TMIO controller, but, it is different on Renesas R-Car SDHI controller if it uses DMAC (Rx address needs to add 0x2000 to Tx address) This patch adds new .dma_rx_offset and cares it Tested-by: Nguyen Xuan Nui <nx-nui@jinso.co.jp> Tested-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2014-08-16regulator: s2mpxxx: Move regulator min/step voltages in common placeAmit Daniel Kachhap
This is a cleanup patch and moves min/step voltages in a common samsung header file so that they can be used by other s2mpxxx PMIC drivers. Only few required macros are added currently and others can be added if needed. Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-08-07Merge tag 'mfd-for-linus-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD update from Lee Jones: "Changes to existing drivers: - checkpatch fixes throughout the subsystem - use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core - use DMA in rtsx_pcr - restrict building on unsupported architectures on timberdale, cs5535 - SPI hardening in cros_ec_spi - more robust error handing in asic3, cros_ec, ab8500-debugfs, max77686 and pcf50633-core - reorder PM runtime and regulator handing during shutdown in arizona - enable wakeup in cros_ec_spi - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld, tps65912-spi, wm5110-tables and ab8500-debugfs - add regulator handing into suspend() in sec-core - remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel - use cross-architecture friendly data sizes in stmpe-i2c, arizona, max77686 and tps65910 - devicetree documentation updates throughout - provide power management support in max77686 - few OF clean-ups in max77686 - use manged resources in tps6105x New drivers/supported devices: - add support for s2mpu02 to sec-core - add support for Allwinner A32 to sun6i-prcm - add support for Maxim 77802 in max77686 - add support for DA9063 AD in da9063 - new driver for Intel PMICs (generic) and specifically Crystal Cove (Re-)moved drivers == - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb" * tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits) MAINTAINERS: Update MFD repo location mfd: omap-usb-host: Fix improper mask use. mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it mfd: arizona: Add missing handling for ISRC3 under/overclocked mfd: wm5110: Add new interrupt register definitions mfd: arizona: Rename thermal shutdown interrupt mfd: wm5110: Add in the output done interrupts mfd: wm5110: Remove non-existant interrupts mfd: tps65912-spi: Remove unused variable mfd: htc-i2cpld: Remove unused code mfd: da9063: Add support for AD silicon variant mfd: arizona: Map MICVDD from extcon device to the Arizona core mfd: arizona: Add MICVDD to mapped regulators for wm8997 mfd: max77686: Ensure device type IDs are architecture agnostic mfd: max77686: Add Maxim 77802 PMIC support mfd: tps6105x: Use managed resources when allocating memory mfd: wm8997-tables: Suppress 'line over 80 chars' warnings mfd: kempld-core: Correct a variety of checkpatch warnings mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch mfd: si476x-cmd: Remedy checkpatch style complains ...
2014-08-06Merge tag 'sound-3.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There've been many updates in ASoC side at this time, especially the framework enhancement for multiple CODECs on a single DAI and more componentization works. The only major change in ALSA core is the addition of timestamp type in sw_params field. This should behave in backward compatible way. Other than that, there are lots of small changes and new drivers in wide range, including a large code cut in HD-audio driver for deprecated static quirks. Some highlights are below: ALSA Core: - Add the new timestamp type field to sw_params to choose MONOTONIC_RAW type HD-audio: - Continued conversion to standard printk macros, generic code cleanups - Removal of obsoleted static quirk codes for Conexant and C-Media codecs - Fixups for HP Envy TS, Dell XPS 15, HP and Dell mute/mic LED, Gigabyte BXBT-2807 mobo - Intel Braswell support ASoC: - Support for multiple CODECs attached to a single DAI, enabling systems with for example multiple DAC/speaker drivers on a single link, contributed by Benoit Cousson based on work from Misael Lopez Cruz - Support for byte controls larger than 256 bytes based on the use of TLVs contributed by Omair Mohammed Abdullah - More componentisation work from Lars-Peter Clausen - The remainder of the conversions of CODEC drivers to params_width() by Mark Brown - Drivers for Cirrus Logic CS4265, Freescale i.MX ASRC blocks, Realtek RT286 and RT5670, Rockchip RK3xxx I2S controllers and Texas Instruments TAS2552 - Lots of updates and fixes, especially to the DaVinci, Intel, Freescale, Realtek, and rcar drivers" * tag 'sound-3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (402 commits) ALSA: usb-audio: Whitespace cleanups for sound/usb/midi.* ALSA: usb-audio: Respond to suspend and resume callbacks for MIDI input sound/oss/pss: Remove typedefs pss_mixerdata and pss_confdata sound/oss/opl3: Remove typedef opl_devinfo ALSA: fireworks: fix specifiers in format strings for propper output ASoC: imx-audmux: Use uintptr_t for port numbers ASoC: davinci: Enable menuconfig entry for McASP ASoC: fsl_asrc: Don't access members of config before checking it ASoC: fsl_sarc_dma: Check pair before using it ASoC: adau1977: Fix truncation warning on 64 bit architectures ALSA: virtuoso: add Xonar Essence STX II support ALSA: riptide: fix %d confusingly prefixed with 0x in format strings ALSA: fireworks: fix %d confusingly prefixed with 0x in format strings ALSA: hda - add codec ID for Braswell display audio codec ALSA: hda - add PCI IDs for Intel Braswell ALSA: usb-audio: Adjust Gamecom 780 volume level ALSA: usb-audio: improve dmesg source grepability ASoC: rt5670: Fix duplicate const warnings ASoC: rt5670: Staticise non-exported symbols ASoC: Intel: update stream only on stream IPC msgs ...
2014-08-05Merge tag 'regulator-v3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A couple of nice new features this month, the ability to map regulators in order to allow voltage control by external coprocessors is something people have been asking for for a long time. - improved support for switch only "regulators", allowing current state to be read from the parent regulator but no setting. - support for obtaining the register access method used to set voltages, for use in systems which can offload control of this to a coprocessor (typically for DVFS). - support for Active-Semi AC8846, Dialog DA9211 and Texas Instruments TPS65917" * tag 'regulator-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (58 commits) regulator: act8865: fix build when OF is not enabled regulator: act8865: add act8846 to DT binding documentation regulator: act8865: add support for act8846 regulator: act8865: prepare support for other act88xx devices regulator: act8865: set correct number of regulators in pdata regulator: act8865: Remove error variable in act8865_pmic_probe regulator: act8865: fix parsing of platform data regulator: tps65090: Set voltage for fixed regulators regulator: core: Allow to get voltage count and list from parent regulator: core: Get voltage from parent if not available regulator: Add missing statics and inlines for stub functions regulator: lp872x: Don't set constraints within the regulator driver regmap: Fix return code for stub regmap_get_device() regulator: s2mps11: Update module description and Kconfig to add S2MPU02 support regulator: Add helpers for low-level register access regmap: Allow regmap_get_device() to be used by modules regmap: Add regmap_get_device regulator: da9211: Remove unnecessary devm_regulator_unregister() calls regulator: Add DT bindings for tps65218 PMIC regulators. regulator: da9211: new regulator driver ...
2014-08-05Merge remote-tracking branches 'regulator/topic/s2mps11', ↵Mark Brown
'regulator/topic/s2mpu02', 'regulator/topic/s5m8767' and 'regulator/topic/tps65090' into regulator-next
2014-08-04Merge remote-tracking branches 'asoc/topic/adau1977', 'asoc/topic/ak4642', ↵Mark Brown
'asoc/topic/ak5386' and 'asoc/topic/arizona' into asoc-next
2014-07-28mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested itCharles Keepax
We only request the control interface error IRQ if we set ctrlif_error, as such we should only free it in that situation. Otherwise we will attempt to free an IRQ we never requested and get a warning from the IRQ core. This patch moves the ctrlif_error variable into the arizona structure and checks it in all cases we free the control interface error IRQ. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Add new interrupt register definitionsCharles Keepax
Newer versions of the IP have a lot of new interrupts and move several existing interrupts. This patch adds the register definitions and regmap hookup for these interrupts. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: arizona: Rename thermal shutdown interruptCharles Keepax
Newer versions of the IP introduce short circuit protection which will also shutdown the speaker. Rename the interrupt and associated register bits associated with thermal events to better fit the function and avoid conflict with future interrupt additions. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: wm5110: Add in the output done interruptsCharles Keepax
wm5110 has interrupts to signal that an output has fully enabled. This patch adds in these interrupts although use is not made of them yet. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-28mfd: da9063: Add support for AD silicon variantOpensource [Steve Twiss]
Add register definitions for DA9063 AD (0x3) silicon variant ID the ability to choose the silicon variant at run-time using regmap configuration. This patch also adds RTC support for the AD silicon changes. It adds both BB and AD support as regmap ranges and then makes the distinction between the two tables at run-time. This allows both AD and BB silicon variants to be supported at the same time. Suggested-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Opensource [Steve Twiss] <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-25mfd: max77686: Ensure device type IDs are architecture agnosticLee Jones
Extinguishes: ../drivers/mfd/max77686.c: In function ‘max77686_i2c_probe’: ../drivers/mfd/max77686.c:254:20: warning: cast from pointer to integer of different size Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-25mfd: max77686: Add Maxim 77802 PMIC supportJavier Martinez Canillas
Maxim MAX77802 is a power management chip that contains 10 high efficiency Buck regulators, 32 Low-dropout (LDO) regulators used to power up application processors and peripherals, a 2-channel 32kHz clock outputs, a Real-Time-Clock (RTC) and a I2C interface to program the individual regulators, clocks outputs and the RTC. This patch adds support for MAX77802 to the MAX77686 driver and is based on a driver added to the Chrome OS kernel 3.8 by Simon Glass. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-23Merge tag 'mfd-extcon-regulator-v3.17' of ↵Chanwoo Choi
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into extcon-next Immutable branch between MFD, Extcon and Regulator due for v3.17
2014-07-21mfd: max77686: Convert to use regmap_irqJavier Martinez Canillas
By using the generic IRQ support in the Register map API, it is possible to get rid max77686-irq.c and simplify the code. Suggested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-21mfd: ab8500-debugfs: BIG clean-upLee Jones
When checkpatch is run on ab8500-debugfs.c it screamed blue murder! This patch fixes up all of the errors/warnings reported: WARNING: line over 80 characters + err = seq_printf(s, " [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" [0x%02X/0x%02X]: 0x%02X\n", WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, AB8500_NAME_STRING " register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO"ab8500 register values:\n"); WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... + printk(KERN_INFO" bank 0x%02X:\n", i); WARNING: externs should be avoided in .c files +extern int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); WARNING: quoted string split across lines + pr_info("Saving all ABB registers at \"ab8500_complete_register_dump\" " + "for crash analyze.\n"); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "abx500_set_reg failed %d, %d", err, __LINE__); WARNING: Prefer seq_puts to seq_printf + seq_printf(s, "name: number: number of: wake:\n"); WARNING: line over 80 characters + return single_open(file, ab8500_print_modem_registers, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_btemp_ball_print, inode->i_private); WARNING: line over 80 characters + return single_open(file, ab8500_gpadc_main_bat_v_print, inode->i_private); WARNING: line over 80 characters + vbat_true_meas_convert = ab8500_gpadc_ad_to_voltage(gpadc, VBAT_TRUE_MEAS, WARNING: line over 80 characters +static int ab8540_gpadc_vbat_true_meas_and_ibat_print(struct seq_file *s, void *p) WARNING: line over 80 characters +static const struct file_operations ab8540_gpadc_vbat_true_meas_and_ibat_fops = { WARNING: line over 80 characters + vmain_l, vmain_h, btemp_l, btemp_h, vbat_l, vbat_h, ibat_l, ibat_h); WARNING: quoted string split across lines + dev_err(dev, "debugfs error input: " + "should be egal to 1, 4, 8 or 16\n"); WARNING: Missing a blank line after declarations + char *s = b; + if ((*s == '0') && ((*(s+1) == 'x') || (*(s+1) == 'X'))) { WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.mask = simple_strtoul(b, &b, 0); WARNING: simple_strtol is obsolete, use kstrtol instead + loc.shift = simple_strtol(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.bank = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + loc.addr = simple_strtoul(b, &b, 0); WARNING: simple_strtoul is obsolete, use kstrtoul instead + val = simple_strtoul(b, &b, 0); WARNING: quoted string split across lines + pr_warn("HWREG request: %s, %s, addr=0x%08X, mask=0x%X, shift=%d" + "value=0x%X\n", (write) ? "write" : "read", WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "sysfs_create_file failed %d\n", err); WARNING: Prefer [subsystem eg: netdev]_err([subsystem]dev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ... + printk(KERN_ERR "request_threaded_irq failed %d, %lu\n", ERROR: code indent should use tabs where possible + err, user_val);$ WARNING: please, no spaces at the start of a line + err, user_val);$ WARNING: Missing a blank line after declarations + struct resource *res; + debug_bank = AB8500_MISC; ERROR: space required after that ',' (ctx:VxV) + sizeof(*dev_attr)*num_irqs,GFP_KERNEL); ^ WARNING: return of an errno should typically be -ve (return -ENXIO) + return ENXIO; WARNING: line over 80 characters + file = debugfs_create_file("register-bank", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-address", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("register-value", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-subscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("irq-unsubscribe", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("all-modem-registers", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_v", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("main_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("usb_charger_c", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("xtal_temp", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_xtal_temp_fops); WARNING: line over 80 characters + file = debugfs_create_file("vbattruemeas", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + file = debugfs_create_file("otp_calib", (S_IRUGO | S_IWUSR | S_IWGRP), WARNING: line over 80 characters + ab8500_gpadc_dir, &plf->dev, &ab8540_gpadc_otp_calib_fops); total: 2 errors, 44 warnings, 3230 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: tps65910: Rid data size incompatibility warn when building for 64bitLee Jones
Extinguishes: ../drivers/mfd/tps65910.c: In function ‘tps65910_parse_dt’: ../drivers/mfd/tps65910.c:404:14: warning: cast from pointer to integer of different size Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Move EC interrupt to cros_ec_keybAndrew Bresticker
If we receive EC interrupts after the cros_ec driver has probed, but before the cros_ec_keyb driver has probed, the cros_ec IRQ handler will not run the cros_ec_keyb notifier and the EC will leave the IRQ line asserted. The cros_ec IRQ handler then returns IRQ_HANDLED and the resulting flood of interrupts causes the machine to hang. Since the EC interrupt is currently only used for the keyboard, move the setup and handling of the EC interrupt to the cros_ec_keyb driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: ec_dev->cmd_xfer() returns number of bytes received from ECBill Richardson
When communicating with the EC, the cmd_xfer() function should return the number of bytes it received from the EC, or negative on error. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Check result code from EC messagesBill Richardson
Just because the host was able to talk to the EC doesn't mean that the EC was happy with what it was told. Errors in communincation are not the same as error messages from the EC itself. This change lets the EC report its errors separately. [dianders: Added common function to cros_ec.c] Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: cleanup: Remove EC wrapper functionsBill Richardson
Remove the three wrapper functions that talk to the EC without passing all the desired arguments and just use the underlying communication function that passes everything in a struct intead. This is internal code refactoring only. Nothing should change. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: cleanup: remove unused fields from struct cros_ec_deviceBill Richardson
struct cros_ec_device has a superfluous "name" field. We can get all the debugging info we need from the existing ec_name and phys_name fields, so let's take out the extra field. The printout also has sufficient info in it without explicitly adding the transport. Before this change: cros-ec-spi spi2.0: Chrome EC (SPI) After this change: cros-ec-spi spi2.0: Chrome EC device registered Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Use struct cros_ec_command to communicate with the ECBill Richardson
This is some internal structure reorganization / renaming to prepare for future patches that will add a userspace API to cros_ec. There should be no visible changes. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Tweak struct cros_ec_device for clarityBill Richardson
The members of struct cros_ec_device were improperly commented, and intermixed the private and public sections. This is just cleanup to make it more obvious what goes with what. [dianders: left lock in the structure but gave it the name that will eventually be used.] Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Allow static din/dout buffers with cros_ec_register()Bill Richardson
The lower-level driver may want to provide its own buffers. If so, there's no need to allocate new ones. This already happens to work just fine (since we check for size of 0 and use devm allocation), but it's good to document it. [dianders: Resolved conflicts; documented that no code changes needed on mainline] Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: cros_ec: Fix the comment on cros_ec_remove()Bill Richardson
This comment was incorrect, so update it. Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: sec-core: Add support for S2MPU02 deviceChanwoo Choi
Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: mc13xxx: Use regmap irq framework for interruptsAlexander Shiyan
This patch convert mc13xxx MFD driver to use regmap irq framework for interrupt registration. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09mfd: arizona: Lower ARIZONA_MAX_CORE_SUPPLIES to 2Charles Keepax
There are no Arizona devices with 3 core supplies but we define a fix array with space for 3 core supplies. Lower the ARIZONA_MAX_CORE_SUPPLIES define to 2, to save a few bytes. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-09Merge branches 'ib-mfd-extcon-regulator-3.17', 'ib-mfd-gpio-3.17' and ↵Lee Jones
'ib-mfd-mmc-3.17' into ibs-for-mfd-merged
2014-07-09mfd: rtsx: Add dma transfer functionMicky Ching
rtsx driver using a single function for transfer data, dma map/unmap are placed in one fix function. We need map/unmap dma in different place(for mmc async driver), so add three function for dma map, dma transfer and dma unmap. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-03regulator: palmas: Rename reg_info to palmas_reg_infoNishanth Menon
reg_info is a generic term which might cause conflict at a later point in time. To prevent such a thing from occuring in future, rename to palmas_reg_info. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Lee Jones <lee.jones@linaro.org> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23regulator: palmas: Add palmas_pmic_driver_data structureKeerthy
Add palmas_pmic_driver_data structure. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23mfd: palmas: shift the palmas_sleep_requestor_info structure definition to ↵Keerthy
the header file shift the palmas_sleep_requestor_info structure definition to the header file. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23regulator: palmas: Shift the reg_info structure definition to the header fileKeerthy
Shift the reg_info structure definition to the header file. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-23mfd: palmas: Add tps65917 specific definitions and enumsKeerthy
Add tps65917 specific definitions and enums. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-06-17mfd: intel_soc_pmic: Core driverZhu, Lejun
This patch provides the common I2C driver code for Intel SoC PMICs. Signed-off-by: Yang, Bin <bin.yang@intel.com> Signed-off-by: Zhu, Lejun <lejun.zhu@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17mfd: max77693: Handle IRQs using regmapRobert Baldyga
This patch modifies mfd driver to use regmap for handling interrupts. It allows to simplify irq handling process. This modifications needed to make small changes in function drivers, which use interrupts. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-17mfd: max77693: Remove unnecessary wrapper functionsRobert Baldyga
This patch removes wrapper functions used to access regmap, and make driver using regmap_*() functions instead. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-16extcon: arizona: support inverted jack detect switchRichard Fitzgerald
Add config option for inverted jack detect switch that opens when jack is inserted. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> [Acked by Lee Jones for MFD part] Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2014-06-10rtc: s5m: use shorter time of register updateKrzysztof Kozlowski
Set the time needed for updating alarm and time registers to 0.45 ms. The default is 7.32 ms which is too long and leads to warnings when setting alarm or time: s5m-rtc: waiting for UDR update, reached max number of retries Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-30 23:25:42 +0000