| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Apple DWI Backlight:
- Added devicetree bindings for backlight controllers on Apple's DWI
interface.
- Added a new driver (apple_dwi_bl) for these controllers found on
some Apple mobile devices.
- Added MAINTAINERS entries for the new driver.
- led_bl: Fixed a locking issue by holding the led_access lock when
calling led_sysfs_disable() during device removal to prevent
potential warnings.
- Removed unnecessary <linux/fb.h> includes from a bunch of drivers.
- tdo24m: Removed redundant whitespace in Kconfig description.
- pcf50633-backlight: Removed the driver as the underlying pcf50633 MFD
and s3c24xx platform support were removed.
* tag 'backlight-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (22 commits)
backlight: pcf50633-backlight: Remove unused driver
backlight: tdo24m: Eliminate redundant whitespace
MAINTAINERS: Add entries for Apple DWI backlight controller
backlight: apple_dwi_bl: Add Apple DWI backlight driver
dt-bindings: leds: backlight: apple,dwi-bl: Add Apple DWI backlight
backlight: led_bl: Hold led_access lock when calling led_sysfs_disable()
backlight: wm831x_bl: Do not include <linux/fb.h>
backlight: vgg2432a4: Do not include <linux/fb.h>
backlight: tps65217_bl: Do not include <linux/fb.h>
backlight: max8925_bl: Do not include <linux/fb.h>
backlight: lv5207lp: Do not include <linux/fb.h>
backlight: locomolcd: Do not include <linux/fb.h>
backlight: hp680_bl: Do not include <linux/fb.h>
backlight: ep93xx_bl: Do not include <linux/fb.h>
backlight: da9052_bl: Do not include <linux/fb.h>
backlight: da903x_bl: Do not include <linux/fb.h>
backlight: bd6107_bl: Do not include <linux/fb.h>
backlight: as3711_bl: Do not include <linux/fb.h>
backlight: adp8870_bl: Do not include <linux/fb.h>
backlight: adp8860_bl: Do not include <linux/fb.h>
...
|
|
Remove the remaining parts of the 50633, the core, headers and glue.
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-10-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250311014959.743322-4-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-2-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The pcf50633 was used as part of the OpenMoko devices but
the support for its main chip was recently removed in:
commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support")
See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250311014959.743322-8-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
pcap_adc_sync() was added in 2009 by commit 13a09f93d2bf ("mfd: add PCAP
driver") but has remained unused; the async version is still used.
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250306011027.257021-1-linux@treblig.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove needless 'return' in the following void APIs:
prcmu_early_init()
prcmu_system_reset()
prcmu_modem_reset()
Since both the API and callee involved are void functions.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250221-rmv_return-v1-15-cc8dff275827@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With commit dcbb01fbb7ae ("x86/pci: Remove old STA2x11 support"), the core
driver for STA2x11 is not needed and cannot be built anymore.
Remove the driver and its header file.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250303100055.372689-1-lukas.bulwahn@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The header doesn't make use of any symbols declared in <linux/pwm.h>.
There are tree files that #include <mfd/lp3943.h>. Two of them
(i.e. drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c) also don't
use any and the third (drivers/pwm/pwm-lp3943.c) has an explicit include
of <linux/pwm.h> itself.
So drop the unused include. The intended side effect is that
drivers/gpio/gpio-lp3943.c and drivers/mfd/lp3943.c stop importing the
"PWM" module namespace.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250212170403.36619-2-u.kleine-koenig@baylibre.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Utilise devm_*() managed resource helpers for freeing IRQs instead.
Reported-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use chip ID and chip_data struct to differentiate between 3 PMIC devices in
probe(). Add TPS65214 resource information. Update descriptions and
copyright information to reflect the driver supports 3 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-6-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use chip ID and chip_data struct to differentiate between devices in
probe(). Add TPS65215 resource information. Update descriptions and
copyright information to reflect the driver supports 2 PMIC devices.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20250206173725.386720-5-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for STM32MP25 SoC. Use newly introduced compatible, to handle
new features.
Identification and hardware configuration registers allow to read the
timer version and capabilities (counter width, number of channels...).
So, rework the probe to avoid touching ARR register by simply read the
counter width when available. This may avoid messing with a possibly
running timer.
Also add useful bit fields to stm32-timers header file.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-3-fabrice.gasnier@foss.st.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-mfd-regulator-6.15' into ibs-for-mfd-merged
|
|
Add support for Samsung's S2MPU05 PMIC. It's the primary PMIC used by
Exynos7870 devices. It houses regulators (21 LDOs and 5 BUCKs) and a RTC
clock device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pmic-regulators-v3-2-808d0b47a564@disroot.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
This adds basic support for LEDs for the max77705 PMIC.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-7-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add the core MFD driver for max77705 PMIC. Drivers for sub-devices
will be added in subsequent patches.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-5-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
- Fix race in device_node_get_regmap() using more extensive locking
- Remove unused platform driver support for syscon
- Allow syscon nodes to be registered without a "syscon" compatible
string
- Make `platform_data` pointer const in struct mfd_cell
- Revert support for multiple AXP PMICs to avoid regressions
- Increase SoundWire attach timeout and use gpiod_set_raw() for GPIO
operation
- Store the result from fault_log() for use by other sub-components
- Fix an invalid regmap-config max_register value
- Add another Gemini Lake ISA bridge PCI device ID
- Use devm_register_power_off_handler() to simplify code
- Add support for QNAP microcontroller units, including LEDs, input,
and hwmon
- Use MFD_CELL macros and remove unused code
- Add support for AAEON UP board FPGA
- Remove unused includes
- Fix various typos and compatibility issues in multiple bindings
- Add new bindings for rk3562 QoS, LED1202, and qcom,tcsr-ipq5424
- Convert several bindings to YAML schema
- Update sprd,sc2731 bindings to reference sprd,sc2731-efuse bindings
directly
- Fix rohm,bd71815 bindings by correcting resistor values and typos
- Documentation improvements:
- Add documentation for LED1202 and qnap-mcu-hwmon
- Adjust the file entry for the qnap-mcu header in MAINTAINERS
* tag 'mfd-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (35 commits)
MAINTAINERS: Adjust the file entry for the qnap-mcu header
dt-bindings: mfd: syscon: Fix ti,j784s4-acspcie-proxy-ctrl compatible
dt-bindings: mfd: syscon: Fix al,alpine-sysfabric-service compatible
Revert "mfd: axp20x: Allow multiple regulators"
dt-bindings: mfd: syscon: Add rk3562 QoS register compatible
mfd: syscon: Allow syscon nodes without a "syscon" compatible
mfd: syscon: Remove the platform driver support
mfd: syscon: Fix race in device_node_get_regmap()
dt-bindings: mfd: atmel: Convert to YAML schema
dt-bindings: mfd: atmel,at91sam9260: Convert to YAML schema
dt-bindings: mfd: sprd,sc2731: Reference sprd,sc2731-efuse bindings
mfd: tps65219: Remove unused macros & add regmap.h
mfd: tps65219: Use MFD_CELL macros
leds: Add LED1202 I2C driver
dt-bindings: leds: Add LED1202 LED Controller
Documentation:leds: Add leds-st1202.rst
mfd: Add support for AAEON UP board FPGA
mfd: da9052: Store result from fault_log
mfd: intel_soc_pmic_chtdc_ti: Fix invalid regmap-config max_register value
mfd: cs42l43: Use devres for remove as well
...
|
|
These macros are not used by the driver, and the structs are accounted
for with the addition of the linux/regmap.h file.
Signed-off-by: Shree Ramamoorthy <s-ramamoorthy@ti.com>
Link: https://lore.kernel.org/r/20241217204935.1012106-3-s-ramamoorthy@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The UP boards implement some features (pin controller, LEDs) through an
on-board FPGA.
This MFD driver implements the line protocol to communicate with the FPGA
through regmap, and registers pin controller and led cells.
This commit adds support for UP and UP Squared boards.
Based on the work done by Gary Wang <garywang@aaeon.com.tw>.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241211-aaeon-up-board-pinctrl-support-v1-1-24719be27631@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Other sub-components (da9052-wdt) could use the result to determine
reboot cause. Expose the result by make it part of the da9052 structure.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20241210-da9052-wdt-v2-1-95a5756e9ac8@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These microcontroller units are used in network-attached-storage devices
made by QNAP and provide additional functionality to the system.
This adds the base driver that implements the serial protocol via
serdev and additionally hooks into the poweroff handlers to turn
off the parts of the system not supplied by the general PMIC.
Turning off (at least the TSx33 devices using Rockchip SoCs) consists of
two separate actions. Turning off the MCU alone does not turn off the main
SoC and turning off only the SoC/PMIC does not turn off the hard-drives.
Also if the MCU is not turned off, the system also won't start again until
it is unplugged from power.
So on shutdown the MCU needs to be turned off separately before the
main PMIC.
The protocol spoken by the MCU is sadly not documented, but was
obtained by listening to the chatter on the serial port, as thankfully
the "hal_app" program from QNAPs firmware allows triggering all/most
MCU actions from the command line.
The implementation of how to talk to the serial device got some
inspiration from the rave-sp servdev driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-5-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The content of the platform_data of a struct mfd_cell is simply passed on
to the platform_device_add_data() call in mfd_add_device() .
platform_device_add_data() already handles the data behind that pointer
as const and also uses kmemdup to create a copy of the data before
handing that copy over to the newly created platform-device,
so there is no reason to not extend this to struct mfd_cell, as the old
copy in the mfd_cell will be stale anyway.
This allows to pass structs gathered from of_device_get_match_data()
as platform-data to sub-devices - which is retrieved as const already.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20241107114712.538976-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- Add support for exynosautov920 SoC
- Add support for Airoha EN7851 watchdog
- Add support for MT6735 TOPRGU/WDT
- Delete the cpu5wdt driver
- Always print when registering watchdog fails
- Several other small fixes and improvements
* tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits)
watchdog: rti: of: honor timeout-sec property
watchdog: s3c2410_wdt: add support for exynosautov920 SoC
dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings
watchdog: mediatek: Add support for MT6735 TOPRGU/WDT
watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart()
dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property
dt-bindings: watchdog: Document Qualcomm QCS8300
docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors
Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"
watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler
watchdog: Switch back to struct platform_driver::remove()
watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04
watchdog: da9063: Remove __maybe_unused notations
watchdog: da9063: Do not use a global variable
watchdog: Delete the cpu5wdt driver
watchdog: Add support for Airoha EN7851 watchdog
dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581
watchdog: sl28cpld_wdt: don't print out if registering watchdog fails
watchdog: rza_wdt: don't print out if registering watchdog fails
watchdog: rti_wdt: don't print out if registering watchdog fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"New drivers:
- Amlogic A4 and A5 RTC
- Marvell 88PM886 PMIC RTC
- Renesas RTCA-3 for Renesas RZ/G3S
Driver updates:
- ab-eoz9: fix temperature and alarm support
- cmos: improve locking behaviour
- isl12022: add alarm support
- m48t59: improve epoch handling
- mt6359: add range
- rzn1: fix BCD conversions and simplify driver"
* tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits)
rtc: ab-eoz9: don't fail temperature reads on undervoltage notification
rtc: rzn1: reduce register access
rtc: rzn1: drop superfluous wday calculation
m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver
rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly
rtc: m48t59: Use platform_data struct for year offset value
rtc: ab-eoz9: fix abeoz9_rtc_read_alarm
rtc: rv3028: fix RV3028_TS_COUNT type
rtc: rzn1: update Michel's email
rtc: rzn1: fix BCD to rtc_time conversion errors
rtc: amlogic-a4: fix compile error
rtc: amlogic-a4: drop error messages
MAINTAINERS: Add an entry for Amlogic RTC driver
rtc: support for the Amlogic on-chip RTC
dt-bindings: rtc: Add Amlogic A4 and A5 RTC
rtc: add driver for Marvell 88PM886 PMIC RTC
rtc: check if __rtc_read_time was successful in rtc_timer_do_work()
rtc: pcf8563: Switch to regmap
rtc: pcf8563: Sort headers alphabetically
rtc: abx80x: Fix WDT bit position of the status register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"Three new drivers, support for some new models in existing ones and
lots of various tweaks and improvements across the board (switching to
using recommended APIs, code shrink and simplification, etc.).
Also a new feature in the character device uAPI where we now notify
the user-space about changes triggered by in-kernel users as well, not
only when they were done by other user-space agents.
Summary:
GPIOLIB core:
- use the new mem_is_zero() instead of memchr_inv(s, 0, n)
- don't store debounce period twice needlessly
- clean-up debugfs handling
- remove leftover comments referring to no longer used spinlocks
- unduplicate some operations like SRCU locks and initializing GPIO
descriptors
- constify the sysfs class struct
- use lock guards in GPIO sysfs code
- update GPIO uAPI internal flags all at once atomically for
consistency with other places
- modify the behavior of the sysfs interface by no longer exporting
lines that are named inside the driver code or board files with the
sysfs links bearing the line names as this has for many years been
largely unused due to the prevalence of DT, ACPI and firmware nodes
over board files and made the API inconsistent
- for GPIO interrupt providers: free irqs that are still requested by
users when removing the chip
GPIO uAPI:
- notify user-space about changes to GPIO lines' state (requested,
released, reconfigured) triggered from the kernel as well (until
now we'd only do this for changes triggered from user-space)
- to that end: modify the internal workings of the notification
mechanism by switching to an atomic notifier which allows us to
send events from atomic context
- also to that end store the debounce period in the GPIO descriptor
struct and not in the character device context struct
- while at it, also cover the corner-case of users introducing
changes over sysfs while others watch them via the character device
- don't report GPIO lines requested as interrupts as "used" to
user-space as it can still request them as GPIOs
New drivers:
- GPIO part of the MFD Congatec Board Controller
- PolarFire GPIO controller
- GPIOs on FTDI FT2232H
Driver improvements:
- use generic device property accessors instead of OF-specific ones
across many GPIO drivers (mpc8xxx, vf610, eic-sprd, davinci,
ts4900, xilinx, mvebu)
- use devres helpers to simplify error paths and either shrink or
entirely remove the driver's remove() callback (grgpio, amdpt,
menz127, max730x, ftgpio010, 74x164, ljca)
- use helper variables to store the address of pdev->dev and avoid
some line-breaks
- use device_for_each_child_node_scoped() to avoid having to put the
fwnode on breaks or errors (gpio-sim, gpio-dwapb, gpiolib-acpi)
- use a scoped bitmap to simplify the code and drop goto labels in
gpio-aggregator
- drop unneeded Kconfig dependencies on OF_GPIO (grgpio, mveby,
xilinx)
- add support for new models to gpio-aspeed, gpio-rockchip and
gpio-dwapb
- clean-up ACPI handling and some other bits in gpio-xgene-sb
- replace deprecated PCI functions in pcie-idio-24 and pci-idio-16
- allow to build davinci and mvebu drivers with COMPILE_TEST=y
- remove dead code in gpio-mb86s7x
- switch back to using platform_driver::remove() (after the
conversion to remove_new()) across the GPIO drivers
- remove remaining uses of GPIOF_ACTIVE_LOW across the tree and drop
this deprecated symbol
- convert the gpio-altera driver to no longer pull in the deprecated
legacy-of-mm-gpiochip.h header
- use of_property_present() instead of of_property_read_bool() in
gpiolib-of and gpio-rockchip
- allow to build the tegra186 driver on Tegra234 platforms in Kconfig
Late fixes:
- add a missing return value check after devm_kasprintf() to
gpio-grgpio
DT bindings:
- document the ngpios property of gpio-mmio
- add support for a new aspeed model
- fix the example for st,nomadik-gpio
Other:
- kernel doc and comments tweaks
- fix typos in TODO
- reorder headers alphabetically in some drivers
- fix incorrect format specifiers in gpio tools"
* tag 'gpio-updates-for-v6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (98 commits)
gpio: tegra186: Allow to enable driver on Tegra234
gpio: grgpio: Add NULL check in grgpio_probe
tools: gpio: Fix several incorrect format specifiers
gpio: mpfs: add CoreGPIO support
gpio: rockchip: support new version GPIO
gpio: rockchip: change the GPIO version judgment logic
gpio: rockchip: explan the format of the GPIO version ID
gpiolib: cdev: use !mem_is_zero() instead of memchr_inv(s, 0, n)
MAINTAINERS: add gpio driver to PolarFire entry
gpio: Get rid of GPIOF_ACTIVE_LOW
USB: gadget: pxa27x_udc: Avoid using GPIOF_ACTIVE_LOW
pcmcia: soc_common: Avoid using GPIOF_ACTIVE_LOW
leds: gpio: Avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys_polled - avoid using GPIOF_ACTIVE_LOW
Input: gpio_keys - avoid using GPIOF_ACTIVE_LOW
gpio: Use of_property_present() for non-boolean properties
gpio: mpfs: add polarfire soc gpio support
gpio: altera: Drop legacy-of-mm-gpiochip.h header
gpio: pcie-idio-24: Replace deprecated PCI functions
gpio: pci-idio-16: Replace deprecated PCI functions
...
|
|
RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Using the 'use_sw_pm' variable as global is not recommended
as it prevents multi instances of the driver to run.
Make it a member of the da9063 structure instead.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20241018135821.274376-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
The MT6328 PMIC is commonly used with the MT6735 SoC. Add initial
support for this PMIC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20241018081050.23592-5-y.oudjana@protonmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The X-Powers AXP323 is a very close sibling of the AXP313A. The only
difference seems to be the ability to dual-phase the first two DC/DC
converter, which adds another register.
Add the required boilerplate to introduce a new PMIC to the AXP MFD
driver. Where possible, this just maps into the existing structs defined
for the AXP313A, only deviating where needed.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-5-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
At the moment there is an implicit relationship between the AXP model
IDs and the order of the strings in the axp20x_model_names[] array.
This is fragile, and makes adding IDs in the middle error prone.
Make this relationship official by changing the ID type to the actual
enum used, and using indexed initialisers for the string list.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20241007001408.27249-3-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
S2DOS05 is a panel/touchscreen PMIC, often found in
Samsung phones. We define regulator sub-device for which driver will
be added in subsequent patch. The device also has ADC for power and
current measurements.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-2-ea1109029ba5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Remove `enum max77693_irq_source` declaration because unused.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240617-starqltechn_integration_upstream-v5-1-125d9228d751@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The names of regulators are static const strings, so pointers can be made
as pointers to const for code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240909134941.121847-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
After splitting the max5970 into a MFD device clean the remaining
code and drop unused structs.
The struct max5970_data and enum max5970_chip_type aren't used.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://patch.msgid.link/20241002125500.78278-1-patrick.rudolph@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add core MFD driver for the Board Controller found on some Congatec SMARC
module. This Board Controller provides functions like watchdog, GPIO, and
I2C busses.
This commit adds support only for the conga-SA7 module.
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Link: https://lore.kernel.org/r/20241001-congatec-board-controller-v3-1-39ceceed5c47@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Added support for the Analog Devices ADP5585 GPIO and PWM functions
- Added parsing of GPIO hogs for the ADP5585
- Fixed module autoloading in the MAX14577 driver
- Simplified and cleaned up the CROS_EC driver
- Made the Lenovo Yoga Tab 3 X90F DMI match less strict in the
INTEL_SOC_PMIC_CHTWC driver
- Added support for the RK806 PMIC on the I2C bus
- Removed the remaining header file for the DS1WM driver
- Added compatible strings for various devices in the device tree
bindings
- Fixed a comma-related issue in the 88PM860X_CORE driver
- Constified read-only regmap structs in various drivers
- Used scoped variables with memory allocators to simplify error paths
in the MT6360 and SYSCON drivers
- Added Intel Arrow Lake-H and Panther Lake LPSS PCI IDs
* tag 'mfd-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
mfd: atc260x: Convert a bunch of commas to semicolons
dt-bindings: mfd: qcom,tcsr: Add compatible for sa8775p
mfd: intel-lpss: Add Intel Panther Lake LPSS PCI IDs
mfd: intel-lpss: Add Intel Arrow Lake-H LPSS PCI IDs
dt-bindings: mfd: syscon: Add rk3576 QoS register compatible
dt-bindings: mfd: adp5585: Add parsing of hogs
mfd: tc3589x: Drop vendorless compatible string from match table
mfd: qcom-spmi-pmic: Use for_each_child_of_node_scoped()
mfd: max77620: Use for_each_child_of_node_scoped()
mfd: intel_soc_pmic_chtwc: Make Lenovo Yoga Tab 3 X90F DMI match less strict
mfd: cros_ec: Update module description
mfd: cros_ec: Simplify and clean-up cros_ec_dev_init()
mfd: max14577: Provide MODULE_DEVICE_TABLE() to fix module autoloading
mfd: rk8xx: Add support for rk806 on i2c bus
dt-bindings: mfd: syscon: Add ti,j784s4-acspcie-proxy-ctrl compatible
mfd: ds1wm: Remove remaining header file
MAINTAINERS: Repair file entry in MARVELL 88PM886 PMIC DRIVER
mfd: 88pm860x-core: Convert comma to semicolon
mfd: syscon: Use scoped variables with memory allocators to simplify error paths
mfd: mt6360: Use scoped variables with memory allocators to simplify error paths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains some cleanups to the core and some mostly minor updates
to a bunch of drivers and device tree bindings. One thing worth
pointing out is that it contains an immutable branch containing
support for a new mfd chip (Analog Devices ADP5585) with several sub
drivers.
Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
Herring and Wolfram Sang for code contributions and reviews and to Lee
Jones for preparing the above mentioned immutable branch"
* tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits)
pwm: stm32: Fix a typo
dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
dt-bindings: pwm: amlogic: Add optional power-domains
pwm: Switch back to struct platform_driver::remove()
dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
pwm: axi-pwmgen: use shared macro for version reg
pwm: atmel-hlcdc: Drop trailing comma
pwm: atmel-hlcdc: Enable module autoloading
pwm: omap-dmtimer: Use of_property_read_bool()
pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled
pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()
pwm: Simplify pwm_capture()
pwm: lp3943: Use of_property_count_u32_elems() to get property length
pwm: Don't export pwm_capture()
pwm: Make info in traces about affected pwm more useful
dt-bindings: pwm: renesas,tpu: Add r8a779h0 support
dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support
pwm: adp5585: Add Analog Devices ADP5585 support
gpio: adp5585: Add Analog Devices ADP5585 support
mfd: adp5585: Add Analog Devices ADP5585 core support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon
devices
Drivers:
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
Documentation updates
Misc minor cleanups and fixes"
* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: hwmon: Fix missing temp1_max_alarm attribute
power: supply: Drop use_cnt check from power_supply_property_is_writeable()
power: supply: ab8500: Constify struct kobj_type
power: supply: max1720x: fix a double free on error in probe()
power: supply: axp20x_battery: add support for AXP717
power: supply: axp20x_usb_power: Add support for AXP717
dt-bindings: power: supply: axp20x: Add AXP717 compatible
dt-bindings: power: supply: axp20x: Add AXP717 compatible
power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
power: supply: max1720x: add read support for nvmem
mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
power: supply: core: constify psy_tzd_ops
power: reset: brcmstb: Do not go into infinite loop if reset fails
power: reset: brcmstb: Use devm_register_sys_off_handler()
...
|
|
The AXP717 also contains an adjustable boost regulator, to provide the
5V USB VBUS rail when running on battery.
Add the regulator description that states the voltage range this
regulator can cover.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-4-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The AXP717 also contains a boost regulator, to provide the 5V USB VBUS
rail when running on battery.
Add the registers to the MFD description to be able to use them from the
regulator driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20240816001824.6028-3-andre.przywara@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Immutable branch between MFD, IIO and power-supply providing the
register definitions needed for AXP717 support in the axp20x
axp20x_battery and axp20x_usb_power drivers.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The driver was removed after kernel 6.2 rendering the header file
unused.
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/ZpTbGHb6EX2Oe7ok@monster.localdomain
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
`pm800_irq`, `pm805_irq` and `pm805_irq_chip` are not modified and can
be declared as const to move their data to a read-only section.
In order to keep the const modifier for the regmap_irq_chip structures,
the pointer used to reference them must be converted to const as well.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-8-0c8785b1331d@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ibs-for-mfd-merged
|
|
Add support for the AXP717 PMIC to utilize the ADC (for reading
voltage, current, and temperature information from the PMIC) as well
as the USB charger and battery.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240821215456.962564-12-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are two charger current limit registers:
- Fast charge current limit (which controls current going from the
charger to the battery);
- CHGIN input current limit (which controls current going into the
charger through the cable).
Add the necessary functions to retrieve the CHGIN input limit (from CHARGER
regulator) and maximum fast charge current values, and expose them as power
supply properties.
Tested-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816-max77693-charger-extcon-v4-3-050a0a9bfea0@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The ADP5585 is a 10/11 input/output port expander with a built in keypad
matrix decoder, programmable logic, reset generator, and PWM generator.
This driver supports the chip by modelling it as an MFD device, with two
child devices for the GPIO and PWM functions.
The driver is derived from an initial implementation from NXP, available
in commit 8059835bee19 ("MLK-25917-1 mfd: adp5585: add ADI adp5585 core
support") in their BSP kernel tree. It has been extensively rewritten.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240722121100.2855-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
