summaryrefslogtreecommitdiff
path: root/include/linux/phy.h
AgeCommit message (Collapse)Author
2018-01-17net: stmmac: enable EEE in MII, GMII or RGMII onlyJerome Brunet
[ Upstream commit 879626e3a52630316d817cbda7cec9a5446d1d82 ] Note in the databook - Section 4.4 - EEE : " The EEE feature is not supported when the MAC is configured to use the TBI, RTBI, SMII, RMII or SGMII single PHY interface. Even if the MAC supports multiple PHY interfaces, you should activate the EEE mode only when the MAC is operating with GMII, MII, or RGMII interface." Applying this restriction solves a stability issue observed on Amlogic gxl platforms operating with RMII interface and the internal PHY. Fixes: 83bf79b6bb64 ("stmmac: disable at run-time the EEE if not supported") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-15phy: increase size of MII_BUS_ID_SIZE and bus_idVolodymyr Bendiuga
[ Upstream commit 4567d686f5c6d955e57a3afa1741944c1e7f4033 ] Some bus names are pretty long and do not fit into 17 chars. Increase therefore MII_BUS_ID_SIZE and phy_fixup.bus_id to larger number. Now mii_bus.id can host larger name. Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@gmail.com> Signed-off-by: Magnus Öberg <magnus.oberg@westermo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-06net: phy: Do not perform software reset for Generic PHYFlorian Fainelli
commit 0878fff1f42c18e448ab5b8b4f6a3eb32365b5b6 upstream. The Generic PHY driver is a catch-all PHY driver and it should preserve whatever prior initialization has been done by boot loader or firmware agents. For specific PHY device configuration it is expected that a specialized PHY driver would take over that role. Resetting the generic PHY was a bad idea that has lead to several complaints and downstream workarounds e.g: in OpenWrt/LEDE so restore the behavior prior to 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()"). Reported-by: Felix Fietkau <nbd@nbd.name> Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-05net: phy: add an option to disable EEE advertisementjbrunet
[ Upstream commit d853d145ea3e63387a2ac759aa41d5e43876e561 ] This patch adds an option to disable EEE advertisement in the generic PHY by providing a mask of prohibited modes corresponding to the value found in the MDIO_AN_EEE_ADV register. On some platforms, PHY Low power idle seems to be causing issues, even breaking the link some cases. The patch provides a convenient way for these platforms to disable EEE advertisement and work around the issue. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Tested-by: Yegor Yefremov <yegorslists@googlemail.com> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-03net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov
[ Upstream commit f555f34fdc586a56204cd16d9a7c104ec6cb6650 ] The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22net: ethernet: mediatek: add extension of phy-mode for TRGMIISean Wang
adds PHY-mode "trgmii" as an extension for the operation mode of the PHY interface for PHY_INTERFACE_MODE_TRGMII. and adds a variable trgmii inside mtk_mac as the indication to make the difference between the MAC connected to internal switch or connected to external PHY by the given configuration on the board and then to perform the corresponding setup on TRGMII hardware module. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10net: phy: add phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
Ethtool callbacks {get|set}_link_ksettings are often the same, so we add two generics functions phy_ethtool_{get|set}_link_ksettings to avoid writing severals times the same function. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-By: David Decotigny <decot@googlers.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-18phy: add generic function to support ksetting supportPhilippe Reynes
The old ethtool api (get_setting and set_setting) has generic phy functions phy_ethtool_sset and phy_ethtool_gset. To supprt the new ethtool api (get_link_ksettings and set_link_ksettings), we add generic phy function phy_ethtool_ksettings_get and phy_ethtool_ksettings_set. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-13phy: remove documentation of removed members of phy_device structureLABBE Corentin
Commit e5a03bfd873c ("phy: Add an mdio_device structure") removed addr, bus and dev member of the phy_device structure. This patch remove the documentation about those members. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Add support for mdio drivers.Andrew Lunn
Not all devices on an MDIO bus are PHYs. Meaning not all MDIO drivers are PHY drivers. Add support for generic MDIO drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralize setting driver module ownerAndrew Lunn
Rather than have each driver set the driver owner field, do it once in the core code. This will also help with later changes, when the device structure will move. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn
Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add an mdio_device structureAndrew Lunn
Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: phy_{read|write}_mmd_indirect: get addr from phydevAndrew Lunn
The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move mdiobus_read/write operatings into mdio.hAndrew Lunn
These are logically MDIO operations, not phy operations, so move them into the mdio header. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Consistently use addr for address on an MII busAndrew Lunn
Within phy.h, an address on an MII bus has been called both addr and phy_id. phy_id is particularly confusion, since it also means the ID found in register 3, if the device on the bus is a phy. Consistently use addr. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-31ethtool: Add phy statisticsAndrew Lunn
Ethernet PHYs can maintain statistics, for example errors while idle and receive errors. Add an ethtool mechanism to retrieve these statistics, using the same model as MAC statistics. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23net: phy: Add nested variants of mdiobus read/writeNeil Armstrong
Since nested variants of mdiobus_read/write are used in multiple drivers, add nested variants in the mdiobus core. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-03phylib: Add phy_set_max_speed helperSimon Horman
Add a helper to allow ethernet drivers to limit the speed of a phy (that they are attached to). This mainly involves factoring out the business-end of of_set_phy_supported() and exporting a new symbol. This code seems to be open coded in several places, in several different variants. It is is envisaged that this will be used in situations where setting the "max-speed" property in DT is not appropriate, e.g. because the maximum speed is not a property of the phy hardware. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24phy: add phy_device_remove()Russell King
Add a phy_device_remove() function to complement phy_device_register(), which undoes the effects of phy_device_register() by removing the phy device from visibility, but not freeing it. This allows these details to be moved out of the mdio bus code into the phy code where this action belongs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-24phy: fix mdiobus module safetyRussell King
Re-implement the mdiobus module refcounting to ensure that we actually ensure that the mdiobus module code does not go away while we might call into it. The old scheme using bus->dev.driver was buggy, because bus->dev is a class device which never has a struct device_driver associated with it, and hence the associated code trying to obtain a refcount did nothing useful. Instead, take the approach that other subsystems do: pass the module when calling mdiobus_register(), and record that in the mii_bus struct. When we need to increment the module use count in the phy code, use this stored pointer. When the phy is deteched, drop the module refcount, remembering that the phy device might go away at that point. This doesn't stop the mii_bus going away while there are in-use phys - it merely stops the underlying code vanishing. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: phy: Allow PHY devices to identify themselves as Ethernet switches, etc.Florian Fainelli
Some Ethernet MAC drivers using the PHY library require the hardcoding of link parameters when interfaced to a switch device, SFP module, switch to switch port, etc. This has typically lead to various ad-hoc implementations looking like this: - using a "fixed PHY" emulated device, which will provide link indication towards the Ethernet MAC driver and hardware - pretend there is no PHY and hardcode link parameters, ala mv643x_eth Based on that, it is desireable to have the PHY drivers advertise the correct link parameters, just like regular Ethernet PHYs towards their CPU Ethernet MAC drivers, however, Ethernet MAC drivers should be able to tell whether this link should be monitored or not. In the context of an Ethernet switch, SFP module, switch to switch link, we do not need to monitor this link since it should be always up. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: phy: Pass mdix ethtool setting through to phy driverDavid Thomson
Pass the mdix setting from ethtool down to the phy driver, to allow driver specific implementations of manually setting the polarity. Signed-off-by: David Thomson <david.thomson@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27net: phy: Add phy_interface_is_rgmii helperFlorian Fainelli
RGMII interfaces come in 4 different flavors that the PHY library needs to care about: regular RGMII (no delays), RGMII with either RX or TX delay, and both. In order to avoid errors of checking only for one type of RGMII interface and miss the 3 others, introduce a convenience function which tests for all values. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: phy: Add phy_ignore_ta_mask to account for broken turn-aroundFlorian Fainelli
Some PHY devices/switches will not release the turn-around line as they should do at the end of a MDIO transaction. To help with such situations, allow MDIO bus drivers to be made aware of such restrictions. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net: phy: keep track of the PHY suspend stateFlorian Fainelli
In order to avoid double calls to phydev->drv->suspend and resume, keep track of whether the PHY has already been suspended as a consequence of a successful call to phy_suspend(). We will use this in our MDIO bus suspend/resume hooks to avoid a double suspend call. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27net: phy: document has_fixups fieldFlorian Fainelli
has_fixups was introduced to help keeping track of fixups/quirks running on a PHY device, but we did not update the comment above struct phy_device accordingly. Fixes: b0ae009f3dc14 (net: phy: add "has_fixups" boolean property") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06ethtool: Extend ethtool plugin module eeprom API to phylibEd Swierk
This patch extends the ethtool plugin module eeprom API to support cards whose phy support is delegated to a separate driver. The handlers for ETHTOOL_GMODULEINFO and ETHTOOL_GMODULEEEPROM call the module_info and module_eeprom functions if the phy driver provides them; otherwise the handlers call the equivalent ethtool_ops functions provided by network drivers with built-in phy support. Signed-off-by: Ed Swierk <eswierk@skyportsystems.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: phy: add static data field to struct phy_driverJohan Hovold
Add static driver-data field to struct phy_driver, which can be used to store structured device-type information. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-12net: phy: add module_phy_driver macroJohan Hovold
Add helper macro for PHY drivers which do not do anything special in module init/exit. This will allow us to eliminate a lot of boilerplate code. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23net: phy: export phy_{read,write}_mmd_indirectFlorian Fainelli
Some PHY drivers might need to access Clause 45 registers in Clause 22 compatibility mode to e.g: properly advertise EEE support when disabled by default. Export these two helper functions: phy_read_mmd_indirect() and phy_write_mmd_indirect() for drivers to use them. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-30net: libphy: Add phy specific function to access mmd phy registersVince Bridgers
libphy was originally written assuming all phy devices support clause 45 access extensions to the mmd registers through the indirection registers located within the first 16 phy registers. This assumption is not true in all cases, and one specific example is the Micrel ksz9021 10/100/1000 Mbps phy. Using the stmmac driver, accessing the mmd registers to query and configure energy efficient Ethernet (EEE) features yielded unexpected behavior. This patch adds mmd access functions to the phy driver that can be overriden by the phy specific driver if the phy does not support this mechanism or uses it's own non-standard access mechanism. By default, the IEEE Compatible clause 45 access mechanism described in clause 22 is used. With this patch, EEE query/configure functions as expected using the stmmac and the Micrel ksz9021 phy. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-21net: phylib: add link_change_notify callback to phy deviceDaniel Mack
Add a notify callback to inform phy drivers when the core is about to do its link adjustment. No change for drivers that do not implement this callback. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-02mdio_bus: implement devm_mdiobus_alloc/devm_mdiobus_freeGrygorii Strashko
Add a resource managed devm_mdiobus_alloc[_size]()/devm_mdiobus_free() to automatically clean up MDIO bus alocations made by MDIO drivers, thus leading to simplified MDIO drivers code. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20net: phy: export genphy_config_init()Daniel Mack
This enables other drivers to call this generic implementation, and then only do specific details on top of it. Signed-off-by: Daniel Mack <zonque@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16net: phy: add minimal support for QSGMII PHYThomas Petazzoni
This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17net: phy: allow PHY drivers to implement their own software resetFlorian Fainelli
As pointed out by Shaohui, most 10G PHYs out there have a non-standard compliant software reset sequence, eventually something much more complex than just toggling the BMCR_RESET bit. Allow PHY driver to implement their own soft_reset() callback to deal with that. If no callback is provided, call into genphy_soft_reset() which makes sure the existing behavior is kept intact. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17net: phy: move PHY software reset to genphy_soft_resetFlorian Fainelli
As pointed out by Shaohui, this function is generic for 10/100/1000 PHYs, but 10G PHYs might have a slightly different reset sequence which prevents most of them from using this function. Move the BMCR_RESET based software resent sequence to genphy_soft_reset() in preparation for allowing PHY drivers to implement a soft_reset() callback. Reported-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: phy: add MoCA PHY typeFlorian Fainelli
Some Ethernet MACs are connected to a MoCA PHY which will handle the low-level job of sending Ethernet frames on the coaxial cable, these Ethernet MACs need to know about it to be properly configured. Add a new PHY mode "moca" and update the Device Tree parsing logic to look for it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: add "has_fixups" boolean propertyFlorian Fainelli
Add a boolean property which indicates if the PHY has had any fixup routine ran on it. We are later going to use that boolean to expose it as a sysfs property to help troubleshooting. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: re-design phy_modes to be self-containedFlorian Fainelli
of_get_phy_mode() uses a local array to map phy_interface_t values from include/linux/net/phy.h to a string which is read from the 'phy-mode' or 'phy-connection-type' property. In preparation for exposing the PHY interface mode through sysfs, perform the following: - mode phy_modes from drivers/of/of_net.c to include/linux/phy.h such that it is right below the phy_interface_t enum - make it a static inline function returning the string such that we can use it by just including include/linux/net/phy.h - add a PHY_INTERFACE_MODE_MAX enum value to guard the iteration in of_get_phy_mode() Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: allow driver to implement their own aneg_doneFlorian Fainelli
Some PHYs out there can be very quirky with respect to how they would report the auto-negotiation is completed. Allow drivers to override the generic aneg_done() implementation by providing their own. Since not all drivers have been updated yet to use genphy_aneg_done() as aneg_done() callback, we explicitely check that this callback is valid before calling into it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12net: phy: add genphy_aneg_done()Florian Fainelli
In preparation for allowing PHY drivers to potentially override their auto-negotiation done callback, move the contents of phy_aneg_done() to genphy_aneg_done() since that function really is the generic implementation based on the BMSR_ANEGCOMPLETE status. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Support attaching to generic 10g driverAndy Fleming
phy_attach_direct() may now attach to a generic 10G driver. It can also be used exactly as phy_connect_direct(), which will be useful when using of_mdio, as phy_connect (and therefore of_phy_connect) start the PHY state machine, which is currently irrelevant for 10G PHYs. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: introduce PHY_INTERFACE_MODE_XGMII for 10G PHYAndy Fleming
Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-13phylib: Add Clause 45 read/write functionsAndy Fleming
Need an extra parameter to read or write Clause 45 PHYs, so need a different API with the extra parameter. Signed-off-by: Andy Fleming <afleming@gmail.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-14 17:47:11 +0000