Age | Commit message (Collapse) | Author |
|
Provide support for controlling reset pin. If this is not driven
correctly the device will be held in reset and will not respond.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
(cherry picked from commit f657b00df22e231da217ca0162a75db452475e8f)
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
(cherry picked from commit 51a32466a0ca40843039b6d1f1e719bc93db8a21)
|
|
This reverts commit 28531a1ff5ca27c0ab7e2f99bbb0058858b72aa5.
|
|
Signed-off-by: Dominik Sliwa <dominik.sliwa@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
(cherry picked from commit 22a2065b9a3fa6ad458e3100b66c4acaa05f2466)
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Update mxt driver to upstream version.
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
|
|
Conflicts:
arch/arm/mach-tegra/tegra3_usb_phy.c
arch/arm/mach-tegra/usb_phy.c
drivers/usb/gadget/tegra_udc.c
drivers/usb/otg/Makefile
drivers/video/tegra/fb.c
sound/soc/tegra/tegra_pcm.c
|
|
Merge with latest NVIDIA L4T R16.
Only real conflict concerning inverted VBUS gpio support.
|
|
Expanding NOR functionality to work with ADMUX and Burst mode for Micron
Support in E1853.
Bug 989919
Bug 966833
- Adding fields for picking MUX vs NONMUX and picking Async, Paging,
Burst mode for reads
- Added run time decision between them
- 1853 specific settings for Async NOR
- 1852 specific settings for NOR
- 1853 NOR timings changed
Reviewed-on: http://git-master/r/122286
(cherry picked from commit a242e7194c7de559d22fe5b275a8782086f10e50)
Change-Id: I79de1d52d4c7199c83b380c2fa6d8cae6b35f09d
Signed-off-by: Bob Johnston <BJohnston@nvidia.com>
Reviewed-on: http://git-master/r/124946
Tested-by: Bob Johnston <bjohnston@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sumeet Gupta <sumeetg@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
|
|
As HSIC phy parameters are not customizable, removing them
from platform_data structure.
bug 1024260
Change-Id: I00fcc0559be43ad336b5b03a7a47443dfaa80d06
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/119298
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
|
|
Restore the AP/modem handshaking functions and clean up the null
phy driver.
Bug 996035
Signed-off-by: Steve Lin <stlin@nvidia.com>
Reviewed-on: http://git-master/r/109044
(cherry picked from commit ff27e8a48a53fe70949d95915f62dd2e03c73df7)
Change-Id: I12a2401a7fcc540a657ab15378d440ef85561001
Reviewed-on: http://git-master/r/110145
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Steve Lin <stlin@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>
|
|
Changed USB1_UTMIP_XCVR_CFG0_0 register value with values
provided by sys-eng
* Implemented algo as described on Bug 974236
* Added variable 'usb_calib_mask' in 'usb platform data' to
make distinction on how many bits to mask in usb_calib_0 fuse
Bug 978870
Bug 972436
Change-Id: I71f27b0cf5ffe33a9896238b01c52650ca632352
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/103308
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Add builtin_host variable to tegra USB platform data structure
bug 947300
Change-Id: I0c5efd245a63c4331959f18faf316f1632e1801e
Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
Reviewed-on: http://git-master/r/106982
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>
GVS: Gerrit_Virtual_Submit
|
|
Modify USB structures of platform data. Based on the new
platform data structures modifying the initialization in
board files.
Bug 887361
Change-Id: Ie6347a078c9a596a4debe21a353e127ddde35220
Signed-off-by: Rakesh Bodla <rbodla@nvidia.com>
Reviewed-on: http://git-master/r/103597
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rohan Somvanshi <rsomvanshi@nvidia.com>
|
|
Modified files supports unified DirectTouch that can
work both for Cardhu and Kai. Touch configuration
is passed to driver with these board files.
Bug 832605
Signed-off-by: Ali Ekici <aekici@nvidia.com>
Change-Id: I075aaad2e71ee1a87b23680ef629fc99bc42ea93
Reviewed-on: http://git-master/r/80129
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
(cherry picked from commit dc1372f43159640207a0d4e0ff08dde5bafc1baa)
Reviewed-on: http://git-master/r/83569
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>
|
|
Reviewed-on: http://git-master/r/77504
Change-Id: Iafe31126fbcec1bfd01b51e0c122b44d3a71bbda
Signed-off-by: Peter Zu <pzu@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/77759
Reviewed-by: Automatic_Commit_Validation_User
|
|
remove CONFIG_USB_HOTPLUG and add default_enable into tegra_ehci_platform_data
We can't use different def_config because whistler & ventana source code
is merged in same tree.
BUG 923705
Change-Id: I3dfdf237d80865831264f02104c89c8088101905
Reviewed-on: http://git-master/r/74574
Signed-off-by: Kurt Yi <kyi@nvidia.com>
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/75888
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
Adds support for current monitoring for battery EDP capping
Change-Id: I85fc1770013ab80b986b3b6d77ffd96e1dc4068f
Signed-off-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Reviewed-on: http://git-master/r/60560
Reviewed-on: http://git-master/r/69111
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Anshul Jain (SW) <anshulj@nvidia.com>
Tested-by: Anshul Jain (SW) <anshulj@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
This driver reduces CPU frequency in half by setting the CCLK_DIVIDER on
GPIO level triggered event by current monitoring device. It then calls
dvfs apis to reduce cpu frequency/voltage.
Change-Id: I703e2277243df5328ee6a46478ec8b7a3dab93aa
Signed-off-by: Anshul Jain <anshulj@nvidia.com>
Reviewed-on: http://git-master/r/68794
Reviewed-on: http://git-master/r/69103
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Peter Boonstoppel <pboonstoppel@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
This patch adds NOR mapping driver for tegra2 and tegra3.
Signed-off-by: Manoj Chourasia<mchourasia@nvidia.com>
Change-Id: Ie773d024a49977e356d4a9d605910ca30f22a3f3
Reviewed-on: http://git-master/r/43566
Reviewed-on: http://git-master/r/62149
Tested-by: Manoj Chourasia <mchourasia@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
Conflicts:
arch/arm/mach-tegra/Kconfig
arch/arm/mach-tegra/board-ventana.c
drivers/misc/Kconfig
drivers/video/tegra/dc/hdmi.c
Signed-off-by: Dan Willemsen <dwillemsen@nvidia.com>
|
|
OTG host register/unregister functions were duplicated identically
across all board files, making the code difficult to maintain (and
actually some boards did not get all some code fixes leading to the same
bug being met again and again). This patch moves this common code into
tegra-otg.c.
Bug 884315
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Change-Id: I99b118664f0481f6c5470411b43f36609e0feb52
Reviewed-on: http://git-master/r/61763
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>
Rebase-Id: R0f6060514c017946cc9ae2ba2f04a1c134d14d9b
|
|
Hotplug on usb is supported when hotplug flag is set in platform data
Bug 869745
(cherry picked from commit I57ba0b18a2d4232b2df2074c91aff97c6e639e7d)
Reviewed-on: http://git-master/r/54588
Change-Id: I24e5ddf49cead14d3eebe30da0f92402015c95c7
Reviewed-on: http://git-master/r/57725
Tested-by: Artiste Hsu <chhsu@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Rebase-Id: Rdf4296a0b0e04733832b8b60b347a3da9cc67413
|
|
Adding proper usb phy types for link ULPI and null ULPI.
Bug 800301
Original-Change-Id: Ifec7d21d7d013ad81792080d276f59a8c6086c8b
Reviewed-on: http://git-master/r/24238
Tested-by: Szming Lin <stlin@nvidia.com>
Reviewed-by: Udaykumar Rameshchan Raval <uraval@nvidia.com>
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
Original-Change-Id: I9cf7330eb7935a373a5db6cff7e893b9e5a13d51
Rebase-Id: Raa8bc3b12d86ab6deb0f0f9965f03f3fd64b26bd
|
|
Original-Change-Id: I2ffeaf6f8dfeb279b40ca6f69f6c9157401a746a
Rebase-Id: Rba9494e38ec80d140043cb50589fcda5d276a255
|
|
Enable the host mode on usb2 UTMI phy interface
Bug 787810
Original-Change-Id: Ia7da2a0d196f900f80812b987c9fb5302412e751
Reviewed-on: http://git-master/r/18729
Reviewed-by: Suresh Mangipudi <smangipudi@nvidia.com>
Tested-by: Suresh Mangipudi <smangipudi@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Original-Change-Id: I2e7306b82926f2ca566d595dc75252d4881306fb
Rebase-Id: R27ce36f7c4a9d6b52a1314704234745ad5ed6728
|
|
Releasing the platform_data in unregister.
Original-Change-Id: Iba1c6e7ad42b0886f8ce9dadf9664bcc266398d4
Reviewed-on: http://git-master/r/14963
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
Rebase-Id: R0e004bd1328eac471c56390b4f79d6ec8c04d877
|
|
Allow the board file to pass a boot info string through the
platform data that is appended to the /proc/last_kmsg file.
Change-Id: I37065fafb09676085465c93384d8e176fdd942d6
Signed-off-by: Colin Cross <ccross@android.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: (24 commits)
hwmon: (lm90) Refactor reading of config2 register
hwmon: (lm90) Make SA56004 detection more robust
hwmon: (lm90) Simplify handling of extended local temp register
hwmon: (pmbus) Add client driver for LM25066, LM5064, and LM5066
hwmon: (max34440) Add support for peak attributes
hwmon: (max8688) Add support for peak attributes
hwmon: (max16064) Add support for peak attributes
hwmon: (adm1275) Add support for peak attributes
hwmon: (pmbus) Add support for peak attributes
hwmon: Add new attributes to sysfs ABI
hwmon: (pmbus) Strengthen check for status register existence
hwmon: (pmbus) Add support for virtual pages
hwmon: (pmbus) Support reading and writing of word registers in device specific code
hwmon: (pmbus) Increase attribute name size
hwmon: (pmbus) Add ADP4000, NCP4200 and NCP4208 to list of supported devices
hwmon: (pmbus) Add support for VID output voltage mode
hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus
hwmon: (coretemp) Add core/pkg threshold support to Coretemp
hwmon: (lm95241) Add support for LM95231
hwmon: LM95245 driver
...
|
|
Add support for NTC Thermistor series. In this release, the
following thermistors are supported: NCP15WB473, NCP18WB473, NCP03WB473,
and NCP15WL333. This driver is based on the datasheet of MURATA.
The driver in the patch does conversion from the raw ADC value
(either voltage or resistence) to temperature. In order to use
voltage values as input, the circuit schematics should be provided
with the platform data. A compensation table for each type of thermistor
is provided for the conversion.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
The FSA9480 is a USB port accessory detector and switch. This patch adds
support the FSA9480 USB Switch.
[akpm@linux-foundation.org: make a couple of things static]
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As suggested by Arnd, move platform data to include/linux/platform_data
in order to improve build coverage for the driver.
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (76 commits)
pch_uart: reference clock on CM-iTC
pch_phub: add new device ML7213
n_gsm: fix UIH control byte : P bit should be 0
n_gsm: add a documentation
serial: msm_serial_hs: Add MSM high speed UART driver
tty_audit: fix tty_audit_add_data live lock on audit disabled
tty: move cd1865.h to drivers/staging/tty/
Staging: tty: fix build with epca.c driver
pcmcia: synclink_cs: fix prototype for mgslpc_ioctl()
Staging: generic_serial: fix double locking bug
nozomi: don't use flush_scheduled_work()
tty/serial: Relax the device_type restriction from of_serial
MAINTAINERS: Update HVC file patterns
tty: phase out of ioctl file pointer for tty3270 as well
tty: forgot to remove ipwireless from drivers/char/pcmcia/Makefile
pch_uart: Fix DMA channel miss-setting issue.
pch_uart: fix exclusive access issue
pch_uart: fix auto flow control miss-setting issue
pch_uart: fix uart clock setting issue
pch_uart : Use dev_xxx not pr_xxx
...
Fix up trivial conflicts in drivers/misc/pch_phub.c (same patch applied
twice, then changes to the same area in one branch)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (50 commits)
printk: do not mangle valid userspace syslog prefixes
efivars: Add Documentation
efivars: Expose efivars functionality to external drivers.
efivars: Parameterize operations.
efivars: Split out variable registration
efivars: parameterize efivars
efivars: Make efivars bin_attributes dynamic
efivars: move efivars globals into struct efivars
drivers:misc: ti-st: fix debugging code
kref: Fix typo in kref documentation
UIO: add PRUSS UIO driver support
Fix spelling mistakes in Documentation/zh_CN/SubmittingPatches
firmware: Fix unaligned memory accesses in dmi-sysfs
firmware: Add documentation for /sys/firmware/dmi
firmware: Expose DMI type 15 System Event Log
firmware: Break out system_event_log in dmi-sysfs
firmware: Basic dmi-sysfs support
firmware: Add DMI entry types to the headers
Driver core: convert platform_{get,set}_drvdata to static inline functions
Translate linux-2.6/Documentation/magic-number.txt into Chinese
...
|
|
The Tegra 2 SoC has 3 EHCI compatible USB controllers. This patch adds
the necessary glue to allow the ehci-hcd driver to work on Tegra 2
SoCs.
The platform data is used to configure board-specific phy settings and
to configure the operating mode, as one of the ports may be used as a otg
port. For additional power saving, the driver supports powering down the
phy on bus suspend when it is used, for example, to connect an internal
device that use an out-of-band remote wakeup mechanism (e.g. a gpio).
Signed-off-by: Benoit Goby <benoit@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This patch implements PRUSS (Programmable Real-time Unit Sub System)
UIO driver which exports SOC resources associated with PRUSS like
I/O, memories and IRQs to user space. PRUSS is dual 32-bit RISC
processors which is efficient in performing embedded tasks that
require manipulation of packed memory mapped data structures and
handling system events that have tight real time constraints. This
driver is currently supported on Texas Instruments DA850, AM18xx and
OMAP-L138 devices.
For example, PRUSS runs firmware for real-time critical industrial
communication data link layer and communicates with application stack
running in user space via shared memory and IRQs.
Signed-off-by: Pratheesh Gangadhar <pratheesh@ti.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This driver supports UART-DM HW on MSM platforms. It uses the on
chip DMA to drive data transfers and has optional support for UART
power management independent of Linux suspend/resume and wakeup
from Rx.
The driver was originally developed by Google. It is functionally
equivalent to the version available at:
http://android.git.kernel.org/?p=kernel/experimental.git
the differences being:
1) Remove wakelocks and change unsupported DMA API.
2) Replace clock selection register codes by macros.
3) Fix checkpatch errors and add inline documentation.
4) Add runtime PM hooks for active power state transitions.
5) Handle error path and cleanup resources if required.
CC: Nick Pelly <npelly@google.com>
Signed-off-by: Sankalp Bose <sankalpb@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|