| Age | Commit message (Collapse) | Author |
|---|
|
Rework dev_pm_qos_add_ancestor_request() so that device PM QoS type
is passed to it as the third argument and make it support the
DEV_PM_QOS_LATENCY_TOLERANCE device PM QoS type (in addition to
DEV_PM_QOS_RESUME_LATENCY).
That will allow the drivers of devices without latency tolerance
hardware support to use their ancestors having it as proxies for
their latency tolerance requirements.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new latency tolerance device PM QoS type to be use for
specifying active state (RPM_ACTIVE) memory access (DMA) latency
tolerance requirements for devices. It may be used to prevent
hardware from choosing overly aggressive energy-saving operation
modes (causing too much latency to appear) for the whole platform.
This feature reqiures hardware support, so it only will be
available for devices having a new .set_latency_tolerance()
callback in struct dev_pm_info populated, in which case the
routine pointed to by it should implement whatever is necessary
to transfer the effective requirement value to the hardware.
Whenever the effective latency tolerance changes for the device,
its .set_latency_tolerance() callback will be executed and the
effective value will be passed to it. If that value is negative,
which means that the list of latency tolerance requirements for
the device is empty, the callback is expected to switch the
underlying hardware latency tolerance control mechanism to an
autonomous mode if available. If that value is PM_QOS_LATENCY_ANY,
in turn, and the hardware supports a special "no requirement"
setting, the callback is expected to use it. That allows software
to prevent the hardware from automatically updating the device's
latency tolerance in response to its power state changes (e.g. during
transitions from D3cold to D0), which generally may be done in the
autonomous latency tolerance control mode.
If .set_latency_tolerance() is present for the device, a new
pm_qos_latency_tolerance_us attribute will be present in the
devivce's power directory in sysfs. Then, user space can use
that attribute to specify its latency tolerance requirement for
the device, if any. Writing "any" to it means "no requirement, but
do not let the hardware control latency tolerance" and writing
"auto" to it allows the hardware to be switched to the autonomous
mode if there are no other requirements from the kernel side in the
device's list.
This changeset includes a fix from Mika Westerberg.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new field, no_constraints_value, to struct pm_qos_constraints
representing a list of PM QoS constraint requests to be returned by
pm_qos_get_value() when that list of requests is empty.
That field will be equal to default_value for all of the existing
global PM QoS classes and for the resume latency device PM QoS type,
but it will be different from default_value for the new latency
tolerance device PM QoS type introduced by the next changeset.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rename symbols, variables, functions and structure fields related do
the resume latency device PM QoS type so that it is clear where they
belong (in particular, to avoid confusion with the latency tolerance
device PM QoS type introduced by a subsequent changeset).
Update the PM QoS documentation to better reflect its current state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Define two device PM QoS flags, PM_QOS_FLAG_NO_POWER_OFF
and PM_QOS_FLAG_REMOTE_WAKEUP, and introduce routines
dev_pm_qos_expose_flags() and dev_pm_qos_hide_flags() allowing the
caller to expose those two flags to user space or to hide them
from it, respectively.
After the flags have been exposed, user space will see two
additional sysfs attributes, pm_qos_no_power_off and
pm_qos_remote_wakeup, under the device's /sys/devices/.../power/
directory. Then, writing 1 to one of them will update the
PM QoS flags request owned by user space so that the corresponding
flag is requested to be set. In turn, writing 0 to one of them
will cause the corresponding flag in the user space's request to
be cleared (however, the owners of the other PM QoS flags requests
for the same device may still request the flag to be set and it
may be effectively set even if user space doesn't request that).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Acked-by: mark gross <markgross@thegnar.org>
|
|
Modify the device PM QoS core code to support PM QoS flags requests.
First, add a new field of type struct pm_qos_flags called "flags"
to struct dev_pm_qos for representing the list of PM QoS flags
requests for the given device. Accordingly, add a new "type" field
to struct dev_pm_qos_request (along with an enum for representing
request types) and a new member called "flr" to its data union for
representig flags requests.
Second, modify dev_pm_qos_add_request(), dev_pm_qos_update_request(),
the internal routine apply_constraint() used by them and their
existing callers to cover flags requests as well as latency
requests. In particular, dev_pm_qos_add_request() gets a new
argument called "type" for specifying the type of a request to be
added.
Finally, introduce two routines, __dev_pm_qos_flags() and
dev_pm_qos_flags(), allowing their callers to check which PM QoS
flags have been requested for the given device (the caller is
supposed to pass the mask of flags to check as the routine's
second argument and examine its return value for the result).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: mark gross <markgross@thegnar.org>
|
|
The subsequent patches will use struct dev_pm_qos_request for
representing both latency requests and flags requests. To make that
easier, put the node member of struct dev_pm_qos_request (under the
name "pnode") into a union called "data" that will represent the
request's value and list node depending on its type.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: mark gross <markgross@thegnar.org>
|
|
Introduce struct pm_qos_flags_request and struct pm_qos_flags
representing PM QoS flags request type and PM QoS flags constraint
type, respectively. With these definitions the data structures
will be arranged so that the list member of a struct pm_qos_flags
object will contain the head of a list of struct pm_qos_flags_request
objects representing all of the "flags" requests present for the
given device. Then, the effective_flags member of a struct
pm_qos_flags object will contain the bitwise OR of the flags members
of all the struct pm_qos_flags_request objects in the list.
Additionally, introduce helper function pm_qos_update_flags()
allowing the caller to manage the list of struct pm_qos_flags_request
pointed to by the list member of struct pm_qos_flags.
The flags are of type s32 so that the request's "value" field
is always of the same type regardless of what kind of request it
is (latency requests already have value fields of type s32).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Acked-by: mark gross <markgross@thegnar.org>
|
|
Currently struct dev_pm_info contains only one PM QoS constraints
pointer reserved for latency requirements. Since one more device
constraints type (i.e. flags) will be necessary, introduce a new
structure, struct dev_pm_qos, that eventually will contain all of
the available device PM QoS constraints and replace the "constraints"
pointer in struct dev_pm_info with a pointer to the new structure
called "qos".
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
|
|
Fix the following sparse warning:
include/linux/pm_qos.h:69:28: warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
The new API, pm_qos_update_request_timeout() is to provide a timeout
with pm_qos_update_request.
For example, pm_qos_update_request_timeout(req, 100, 1000), means that
QoS request on req with value 100 will be active for 1000 microseconds.
After 1000 microseconds, the QoS request thru req is reset. If there
were another pm_qos_update_request(req, x) during the 1000 us, this
new request with value x will override as this is another request on the
same req handle. A new request on the same req handle will always
override the previous request whether it is the conventional request or
it is the new timeout request.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Gross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
A runtime suspend of a device (e.g. an MMC controller) belonging to
a power domain or, in a more complicated scenario, a runtime suspend
of another device in the same power domain, may cause power to be
removed from the entire domain. In that case, the amount of time
necessary to runtime-resume the given device (e.g. the MMC
controller) is often substantially greater than the time needed to
run its driver's runtime resume callback. That may hurt performance
in some situations, because user data may need to wait for the
device to become operational, so we should make it possible to
prevent that from happening.
For this reason, introduce a new sysfs attribute for devices,
power/pm_qos_resume_latency_us, allowing user space to specify the
upper bound of the time necessary to bring the (runtime-suspended)
device up after the resume of it has been requested. However, make
that attribute appear only for the devices whose drivers declare
support for it by calling the (new) dev_pm_qos_expose_latency_limit()
helper function with the appropriate initial value of the attribute.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The PM QoS feature originally didn't depend on CONFIG_PM, which was
mistakenly changed by commit e8db0be1245de16a6cc6365506abc392c3c212d4
PM QoS: Move and rename the implementation files
Later, commit d020283dc694c9ec31b410f522252f7a8397e67d
PM / QoS: CPU C-state breakage with PM Qos change
partially fixed that by introducing a static inline definition of
pm_qos_request(), but that still didn't allow user space to use
the PM QoS interface if CONFIG_PM was unset (which had been possible
before). For this reason, remove the dependency of PM QoS on
CONFIG_PM to make it work (as intended) with CONFIG_PM unset.
[rjw: Replaced the original changelog with a new one.]
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reported-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
New material in the pm-qos branch depends on recent power management
fixes.
|
|
Looks like change "PM QoS: Move and rename the implementation files"
merged during the 3.2 development cycle made PM QoS depend on
CONFIG_PM which depends on (PM_SLEEP || PM_RUNTIME).
That breaks CPU C-states with kernels not having these CONFIGs, causing CPUs
to spend time in Polling loop idle instead of going into deep C-states,
consuming way way more power. This is with either acpi idle or intel idle
enabled.
Either CONFIG_PM should be enabled with any pm_qos users or
the !CONFIG_PM pm_qos_request() should return sane defaults not to break
the existing users. Here's is the patch for the latter option.
[rjw: Modified the changelog slightly.]
Signed-off-by: Venkatesh Pallipadi <venki@google.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: stable@vger.kernel.org
|
|
- Replace class ID #define with enumeration
- Loop through PM QoS objects during initialization (rather than
initializing them one-by-one)
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-by: Antti Miettinen <amiettinen@nvidia.com>
Reviewed-by: Diwakar Tundlam <dtundlam@nvidia.com>
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>
Acked-by: markgross <markgross@thegnar.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
* pm-domains:
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
PM / Domains: Provide an always on power domain governor
PM / Domains: Fix default system suspend/resume operations
PM / Domains: Make it possible to assign names to generic PM domains
PM / Domains: fix compilation failure for CONFIG_PM_GENERIC_DOMAINS unset
PM / Domains: Automatically update overoptimistic latency information
PM / Domains: Add default power off governor function (v4)
PM / Domains: Add device stop governor function (v4)
PM / Domains: Rework system suspend callback routines (v2)
PM / Domains: Introduce "save/restore state" device callbacks
PM / Domains: Make it possible to use per-device domain callbacks
|
|
Some devices, like the I2C controller on SH7372, are not
necessary for providing power to their children or forwarding
wakeup signals (and generally interrupts) from them. They are
only needed by their children when there's some data to transfer,
so they may be suspended for the majority of time and resumed
on demand, when the children have data to send or receive. For this
purpose, however, their power.ignore_children flags have to be set,
or the PM core wouldn't allow them to be suspended while their
children were active.
Unfortunately, in some situations it may take too much time to
resume such devices so that they can assist their children in
transferring data. For example, if such a device belongs to a PM
domain which goes to the "power off" state when that device is
suspended, it may take too much time to restore power to the
domain in response to the request from one of the device's
children. In that case, if the parent's resume time is critical,
the domain should stay in the "power on" state, although it still may
be desirable to power manage the parent itself (e.g. by manipulating
its clock).
In general, device PM QoS may be used to address this problem.
Namely, if the device's children added PM QoS latency constraints
for it, they would be able to prevent it from being put into an
overly deep low-power state. However, in some cases the devices
needing to be serviced are not the immediate children of a
"children-ignoring" device, but its grandchildren or even less
direct descendants. In those cases, the entity wanting to add a
PM QoS request for a given device's ancestor that ignores its
children will have to find it in the first place, so introduce a new
helper function that may be used to achieve that. This function,
dev_pm_qos_add_ancestor_request(), will search for the first
ancestor of the given device whose power.ignore_children flag is
set and will add a device PM QoS latency request for that ancestor
on behalf of the caller. The request added this way may be removed
with the help of dev_pm_qos_remove_request() in the future, like
any other device PM QoS latency request.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Make the runtime PM core use device PM QoS constraints to check if
it is allowed to suspend a given device, so that an error code is
returned if the device's own PM QoS constraint is negative or one of
its children has already been suspended for too long. If this is
not the case, the maximum estimated time the device is allowed to be
suspended, computed as the minimum of the device's PM QoS constraint
and the PM QoS constraints of its children (reduced by the difference
between the current time and their suspend times) is stored in a new
device's PM field power.max_time_suspended_ns that can be used by
the device's subsystem or PM domain to decide whether or not to put
the device into lower-power (and presumably higher-latency) states
later (if the constraint is 0, which means "no constraint", the
power.max_time_suspended_ns is set to -1).
Additionally, the time of execution of the subsystem-level
.runtime_suspend() callback for the device is recorded in the new
power.suspend_time field for later use by the device's subsystem or
PM domain along with power.max_time_suspended_ns (it also is used
by the core code when the device's parent is suspended).
Introduce a new helper function,
pm_runtime_update_max_time_suspended(), allowing subsystems and PM
domains (or device drivers) to update the power.max_time_suspended_ns
field, for example after changing the power state of a suspended
device.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
To read the current PM QoS value for a given device we need to
make sure that the device's power.constraints object won't be
removed while we're doing that. For this reason, put the
operation under dev->power.lock and acquire the lock
around the initialization and removal of power.constraints.
Moreover, since we're using the value of power.constraints to
determine whether or not the object is present, the
power.constraints_state field isn't necessary any more and may be
removed. However, dev_pm_qos_add_request() needs to check if the
device is being removed from the system before allocating a new
PM QoS constraints object for it, so make it use the
power.power_state field of struct device for this purpose.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Add a global notification chain that gets called upon changes to the
aggregated constraint value for any device.
The notification callbacks are passing the full constraint request data
in order for the callees to have access to it. The current use is for the
platform low-level code to access the target device of the constraint.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
Implement the per-device PM QoS constraints by creating a device
PM QoS API, which calls the PM QoS constraints management core code.
The per-device latency constraints data strctures are stored
in the device dev_pm_info struct.
The device PM code calls the init and destroy of the per-device constraints
data struct in order to support the dynamic insertion and removal of the
devices in the system.
To minimize the data usage by the per-device constraints, the data struct
is only allocated at the first call to dev_pm_qos_add_request.
The data is later free'd when the device is removed from the system.
A global mutex protects the constraints users from the data being
allocated and free'd.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
In preparation for the per-device constratins support:
- rename update_target to pm_qos_update_target
- generalize and export pm_qos_update_target for usage by the upcoming
per-device latency constraints framework:
* operate on struct pm_qos_constraints for constraints management,
* introduce an 'action' parameter for constraints add/update/remove,
* the return value indicates if the aggregated constraint value has
changed,
- update the internal code to operate on struct pm_qos_constraints
- add a NULL pointer check in the API functions
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
In preparation for the per-device constratins support, re-organize
the data strctures:
- add a struct pm_qos_constraints which contains the constraints
related data
- update struct pm_qos_object contents to the PM QoS internal object
data. Add a pointer to struct pm_qos_constraints
- update the internal code to use the new data structs.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
- Misc fixes to improve code readability:
* rename struct pm_qos_request_list to struct pm_qos_request,
* rename pm_qos_req parameter to req in internal code,
consistenly use req in the API parameters,
* update the in-kernel API callers to the new parameters names,
* rename of fields names (requests, list, node, constraints)
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
|
The PM QoS implementation files are better named
kernel/power/qos.c and include/linux/pm_qos.h.
The PM QoS support is compiled under the CONFIG_PM option.
Signed-off-by: Jean Pihet <j-pihet@ti.com>
Acked-by: markgross <markgross@thegnar.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
|
