summaryrefslogtreecommitdiff
path: root/include/linux/spi
AgeCommit message (Collapse)Author
2010-01-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: update multi-touch protocol documentation Input: add the ABS_MT_PRESSURE event Input: winbond-cir - remove dmesg spam Input: lifebook - add another Lifebook DMI signature Input: ad7879 - support auxiliary GPIOs via gpiolib
2010-01-19Input: ad7879 - support auxiliary GPIOs via gpiolibMichael Hennerich
Drop the simple fancy sysfs hooks for the aux GPIOs and expose these via the gpiolib interface so that other drivers can use them. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-12-17Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi: spi_txx9.c: use resource_size() spi: spi_sh_sci.c: use resource_size() spi: spi_mpc8xxx.c: use resource_size() spi: spi_bfin5xx.c: use resource_size() spi: atmel_spi.c: use resource_size() spi: Add s3c64xx SPI Controller driver atmel_spi: fix dma addr calculation for len > BUFFER_SIZE spi_s3c24xx: add FIQ pseudo-DMA support spi: controller driver for Designware SPI core spidev: add proper section markers spidev: use DECLARE_BITMAP instead of declaring the array
2009-12-17spi: controller driver for Designware SPI coreFeng Tang
Driver for the Designware SPI core, it supports multipul interfaces like PCI/APB etc. User can use "dw_apb_ssi_db.pdf" from Synopsys as HW datasheet. [randy.dunlap@oracle.com: fix build] [akpm@linux-foundation.org: build fix] Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-14Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits) spi: fix probe/remove section markings Add OMAP spi100k driver spi-imx: don't access struct device directly but use dev_get_platdata spi-imx: Add mx25 support spi-imx: use positive logic to distinguish cpu variants spi-imx: correct check for platform_get_irq failing ARM: NUC900: Add spi driver support for nuc900 spi: SuperH MSIOF SPI Master driver V2 spi: fix spidev compilation failure when VERBOSE is defined spi/au1550_spi: fix setupxfer not to override cfg with zeros spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove spi/i.MX: fix broken error handling for gpio_request spi/i.mx: drain MXC SPI transfer buffer when probing device MAINTAINERS: add SPI co-maintainer. spi/xilinx_spi: fix incorrect casting spi/mpc52xx-spi: minor cleanups xilinx_spi: add a platform driver using the xilinx_spi common module. xilinx_spi: add support for the DS570 IP. xilinx_spi: Switch to iomem functions and support little endian. xilinx_spi: Split into of driver and generic part. ...
2009-12-13spi: SuperH MSIOF SPI Master driver V2Magnus Damm
This patch is V2 of SPI Master support for the SuperH MSIOF. Full duplex, spi mode 0-3, active high cs, 3-wire and lsb first should all be supported, but the driver has so far only been tested with "mmc_spi". The MSIOF hardware comes with 32-bit FIFOs for receive and transmit, and this driver simply breaks the SPI messages into FIFO-sized chunks. The MSIOF hardware manages the pins for clock, receive and transmit (sck/miso/mosi), but the chip select pin is managed by software and must be configured as a regular GPIO pin by the board code. Performance wise there is still room for improvement, but on a Ecovec board with the built-in sh7724 MSIOF0 this driver gets Mini-sd read speeds of about half a megabyte per second. Future work include better clock setup and merging of 8-bit transfers into 32-bit words to reduce interrupt load and improve throughput. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (151 commits) powerpc: Fix usage of 64-bit instruction in 32-bit altivec code MAINTAINERS: Add PowerPC patterns powerpc/pseries: Track previous CPPR values to correctly EOI interrupts powerpc/pseries: Correct pseries/dlpar.c build break without CONFIG_SMP powerpc: Make "intspec" pointers in irq_host->xlate() const powerpc/8xx: DTLB Miss cleanup powerpc/8xx: Remove DIRTY pte handling in DTLB Error. powerpc/8xx: Start using dcbX instructions in various copy routines powerpc/8xx: Restore _PAGE_WRITETHRU powerpc/8xx: Add missing Guarded setting in DTLB Error. powerpc/8xx: Fixup DAR from buggy dcbX instructions. powerpc/8xx: Tag DAR with 0x00f0 to catch buggy instructions. powerpc/8xx: Update TLB asm so it behaves as linux mm expects. powerpc/8xx: Invalidate non present TLBs powerpc/pseries: Serialize cpu hotplug operations during deactivate Vs deallocate pseries/pseries: Add code to online/offline CPUs of a DLPAR node powerpc: stop_this_cpu: remove the cpu from the online map. powerpc/pseries: Add kernel based CPU DLPAR handling sysfs/cpu: Add probe/release files powerpc/pseries: Kernel DLPAR Infrastructure ...
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-09Merge commit 'origin/master' into nextBenjamin Herrenschmidt
Conflicts: include/linux/kvm.h
2009-12-08spi/mpc52xx-spi: minor cleanupsWolfram Sang
- drop own, obsolete include-file - drop IRQF_SAMPLE_RANDOM (deprecated feature) - drop 'if' above kfree() - typos, braces & whitespaces Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-08xilinx_spi: add support for the DS570 IP.Richard Röjfors
This patch adds in support for the DS570 IP. It's register compatible with the DS464, but adds support for 8/16/32 SPI. The 8/16/32 support is added by attaching callbacks reading/writing the proper amount of data. To indicate to the driver which amount of bits to use a new field is introduced in the platform data struct. Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-08xilinx_spi: Switch to iomem functions and support little endian.Richard Röjfors
This patch changes the out_(be)(8|16|32) and in_(be)(8|16|32) calls to 32 bits ioread/iowrite. The read and write function are attached to the internal struct as callbacks, callback is selected depending on endianess. This will also build on platforms not supporting the in/out calls for instance x86. Acked-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-08xilinx_spi: Split into of driver and generic part.Richard Röjfors
This patch splits the xilinx_spi driver into a generic part and a OF driver part. The reason for this is to later add in a platform driver as well. Tested-by: John Linn <John.Linn@xilinx.com> Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-11-18wl1251: add NVS in EEPROM supportDavid-John Willis
wl1251 supports also that NVS is stored in a separate EEPROM, add support for that. kvalo: use platform data instead Kconfig and use kernel style Signed-off-by: David-John Willis <John.Willis@Distant-earth.com> Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-09tree-wide: fix typos "selct" + "slect" -> "select"Uwe Kleine-König
This patch was generated by git grep -E -i -l 's(le|el)ct' | xargs -r perl -p -i -e 's/([Ss])(le|el)ct/$1elect/ with only skipping net/netfilter/xt_SECMARK.c and include/linux/netfilter/xt_SECMARK.h which have a struct member called selctx. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-04powerpc/5200: Add mpc5200-spi (non-PSC) device driverGrant Likely
Adds support for the dedicated SPI device on the Freescale MPC5200(b) SoC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-09-26Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: new driver for ADP5520/ADP5501 MFD PMICs backlight: extend event support to also support poll() backlight/eeepc-laptop: Update the backlight state when we change brightness backlight/acpi: Update the backlight state when we change brightness backlight: Allow drivers to update the core, and generate events on changes backlight: switch to da903x driver to dev_pm_ops backlight: Add support for the Avionic Design Xanthos backlight device. backlight: spi driver for LMS283GF05 LCD backlight: move hp680-bl's probe function to .devinit.text backlight: Add support for new Apple machines. backlight: mbp_nvidia_bl: add support for MacBookAir 1,1 backlight: Add WM831x backlight driver Trivial conflicts due to '#ifdef CONFIG_PM' differences in drivers/video/backlight/da903x_bl.c
2009-09-23gpio: add MC33880 driverRichard Röjfors
A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: handle TX-only/RX-onlyDavid Brownell
Support two new half-duplex SPI implementation restrictions, for links that talk to TX-only or RX-only devices. (Existing half-duplex flavors support both transfer directions, just not at the same time.) Move spi_async() into the spi.c core, and stop inlining it. Then make that function perform error checks and reject messages that demand more than the underlying controller can support. Based on a patch from Marek Szyprowski which did this only for the bitbanged GPIO driver. Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi: add support for device table matchingAnton Vorontsov
With this patch spi drivers can use standard spi_driver.id_table and MODULE_DEVICE_TABLE() mechanisms to bind against the devices. Just like we do with I2C drivers. This is useful when a single driver supports several variants of devices but it is not possible to detect them in run-time (like non-JEDEC chips probing in drivers/mtd/devices/m25p80.c), and when platform_data usage is overkill. This patch also makes life a lot easier on OpenFirmware platforms, since with OF we extensively use proper device IDs in modaliases. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23spi.h: add missing kernel-doc for struct spi_masterRandy Dunlap
Add missing kernel-doc notation in spi.h for struct spi_master: Warning(include/linux/spi/spi.h:289): No description found for parameter 'mode_bits' Warning(include/linux/spi/spi.h:289): No description found for parameter 'flags' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-07backlight: spi driver for LMS283GF05 LCDMarek Vasut
ADd support for the SPI part of LMS283GF05 LCD. The LCD uses SPI for initialization and powerdown sequences. No further defails are specified in the datasheet about the initialization/powerdown sequence, just the magic numbers that have to be sent over SPI bus. This LCD can be found in the Aeronix Zipit Z2 handheld. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-06-30spi: add spi_master flag wordDavid Brownell
Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-30spi: new spi->mode bitsDavid Brownell
Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
2009-06-18spi: move more spi_setup() functionality into coreDavid Brownell
Move some common spi_setup() error checks into the SPI framework from the spi_master controller drivers: - Add a new "mode_bits" field to spi_master - Use that in spi_setup to validate the spi->mode value being requested. Setting this new field is now mandatory for any controller supporting more than vanilla SPI_MODE_0. - Update all spi_master drivers to: * Initialize that field * Remove current spi_setup() checks using that value. This is a net minor code shrink. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-18spi: move common spi_setup() functionality into coreDavid Brownell
Start moving some spi_setup() functionality into the SPI core from the various spi_master controller drivers: - Make that function stop being an inline; - Move two common idioms from drivers into that new function: * Default bits_per_word to 8 if that field isn't set * Issue a standardized dev_dbg() message This is a net minor source code shrink, and supports enhancments found in some follow-up patches. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-10net/libertas: remove GPIO-CS handling in SPI interface codeSebastian Andrzej Siewior
This removes the dependency on GPIO framework and lets the SPI host driver handle the chip select. The SPI host driver is required to keep the CS active for the entire message unless cs_change says otherwise. This patch collects the two/three single SPI transfers into a message. Also the delay in read path in case use_dummy_writes are not used is moved into the SPI host driver. Tested-by: Mike Rapoport <mike@compulab.co.il> Tested-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-19Input: ads7846 - support swapping x and y axesMichael Roth
Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-06wl12xx: add driverKalle Valo
wl12xx is a driver for TI wl1251 802.11 chipset designed for embedded devices, supporting both SDIO and SPI busses. Currently the driver supports only SPI. Adding support 1253 (the 5 GHz version) should be relatively easy. More information here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=4711&navigationId=12494&templateId=6123 (Collapsed original sequence of pre-merge patches into single commit for initial merge. -- JWL) Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-21spi: documentation: emphasise spi_master.setup() semanticsDavid Brownell
This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-16Merge branch 'next' into for-linusDmitry Torokhov
2009-04-11Input: ads7846 - introduce platform specific way to synchronize samplingEric Miao
Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-04-08Merge branch 'next' into for-linusDmitry Torokhov
2009-04-07SPI: add dma_alignment field to spi_masterMike Rapoport
Some SPI controllers have restrictions on DMAable buffers alignemt. Currently if the buffer supplied by protocol driver is not properly aligned, the controller silently performs transfer in PIO mode. Addition of dma_alignment field to spi_master allows protocol drivers to perform proper alignment. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Cc: Bryan Wu <bryan.wu@analog.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02spi-gpio: allow operation without CS signalMichael Buesch
Change spi-gpio so that it is possible to drive SPI communications over GPIO without the need for a chipselect signal. This is useful in very small setups where there's only one slave device on the bus. This patch does not affect existing setups. I use this for a tiny communication channel between an embedded device and a microcontroller. There are not enough GPIOs available for chipselect and it's not needed anyway in this case. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02memory_accessor: implement the new memory_accessor interfaces for SPI EEPROMsDavid Brownell
- Define new setup() hook to export the accessor - Implement accessor methods Moves some error checking out of the sysfs interface code into the layer below it, which is now shared by both sysfs and memory access code. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-09Input: add AD7879 Touchscreen driverMichael Hennerich
[randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-02-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2009-02-20spi_bitbang: add more lowlevel function documentationMichael Buesch
This adds more documentation of the lowlevel API to avoid future bugs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09libertas: if_spi: add ability to call board specific setup/teardown methodsMike Rapoport
In certain cases it is required to perform board specific actions before activating libertas G-SPI interface. These actions may include power up of the chip, GPIOs setup, proper pin-strapping and SPI controller config. This patch adds ability to call board specific setup/teardown methods Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-03Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-01-30headers_check fix: spi/spidev.hJaswinder Singh Rajput
fix the following 'make headers_check' warning: usr/include/linux/spi/spidev.h:83: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
2009-01-29libertas: if_spi, driver for libertas GSPI devicesColin McCabe
Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-08backlight: add support for Toppoly TDO35S series to tdo24m lcd driverMike Rapoport
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) trivial: chack -> check typo fix in main Makefile trivial: Add a space (and a comma) to a printk in 8250 driver trivial: Fix misspelling of "firmware" in docs for ncr53c8xx/sym53c8xx trivial: Fix misspelling of "firmware" in powerpc Makefile trivial: Fix misspelling of "firmware" in usb.c trivial: Fix misspelling of "firmware" in qla1280.c trivial: Fix misspelling of "firmware" in a100u2w.c trivial: Fix misspelling of "firmware" in megaraid.c trivial: Fix misspelling of "firmware" in ql4_mbx.c trivial: Fix misspelling of "firmware" in acpi_memhotplug.c trivial: Fix misspelling of "firmware" in ipw2100.c trivial: Fix misspelling of "firmware" in atmel.c trivial: Fix misspelled firmware in Kconfig trivial: fix an -> a typos in documentation and comments trivial: fix then -> than typos in comments and documentation trivial: update Jesper Juhl CREDITS entry with new email trivial: fix singal -> signal typo trivial: Fix incorrect use of "loose" in event.c trivial: printk: fix indentation of new_text_line declaration trivial: rtc-stk17ta8: fix sparse warning ...
2009-01-06spi_gpio driverDavid Brownell
Generalize the old at91rm9200 "bootstrap" bitbanging SPI master driver as "spi_gpio", so it works with arbitrary GPIOs and can be configured through platform_data. Such SPI masters support: - any number of bus instances (bus_num is the platform_device.id) - any number of chipselects (one GPIO per spi_device) - all four SPI_MODE values, and SPI_CS_HIGH - i/o word sizes from 1 to 32 bits; - devices configured as with any other spi_master controller When configured using platform_data, this provides relatively low clock rates. On platforms that support inlined GPIO calls, significantly improved transfer speeds are also possible with a semi-custom driver. (It's still painful when accessing flash memory, but less so.) Sanity checked by using this version to replace both native controllers on a board with six different SPI slaves, relying on three different SPI_MODE_* values and both SPI_CS_HIGH settings for correct operation. [akpm@linux-foundation.org: cleanups] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Magnus Damm <damm@igel.co.jp> Tested-by: Magnus Damm <damm@igel.co.jp> Cc: Torgil Svensson <torgil.svensson@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04spi.h uses/needs device.hRandy Dunlap
Include header files as used/needed: In file included from drivers/leds/leds-dac124s085.c:16: include/linux/spi/spi.h:66: error: field 'dev' has incomplete type include/linux/spi/spi.h: In function 'to_spi_device': include/linux/spi/spi.h:100: warning: type defaults to 'int' in declaration of '__mptr' ... Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-30 21:31:42 +0000