Age | Commit message (Collapse) | Author |
|
New i2c slave should be configured with a non-zero i2c address.
Configure i2c slave with an i2c address assigned by platform
data for an i2c dev.
BUG 788286
Reviewed-on: http://git-master/r/25100
(cherry picked from commit e6e0610c72ffce3b734e079faf88fad3f0468d07)
Change-Id: I440aa2cc72007d2835b2027c0b26089d0aad9263
Reviewed-on: http://git-master/r/25223
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Add UART_CAP_HW_CTSRTS flag to tegra type for supporting auto control
of RTSCTS.
Bug 803910
Change-Id: I7b69e4b203e66903ba5755338fcb55f4a87b9a43
Reviewed-on: http://git-master/r/24463
Tested-by: Pradeep Goudagunta <pgoudagunta@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
In systems with multiple framebuffer devices, one of the devices might
be blanked while another is unblanked. In order for the backlight
blanking logic to know whether to turn off the backlight for a
particular framebuffer's blanking notification, it needs to be able to
check if a given framebuffer device corresponds to the backlight.
This plumbs the check_fb hook from core backlight through the
pwm_backlight helper to allow platform code to plug in a check_fb hook.
Originally reviewed on http://git-master/r/21716
Reviewed-on: http://git-master/r/23100
(cherry picked from commit c7831cb27fc6a2701b020676a6daf9c76e9470d9)
Change-Id: I32895d6f2c5988b09680a350e169f1f3c9b56da6
Reviewed-on: http://git-master/r/23725
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Tested-by: Gaurav Sarode <gsarode@nvidia.com>
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
The intensity of the backlight can be varied from a range of
max_brightness to zero. Though most, if not all the pwm based backlight
devices start flickering at lower brightness value. And also for each
device there exists a brightness value below which the backlight appears
to be turned off though the value is not equal to zero.
If the range of brightness for a device is from zero to max_brightness. A
graph is plotted for brightness Vs intensity for the pwm based backlight
device has to be a linear graph.
intensity
| /
| /
| /
|/
---------
0 max_brightness
But pratically on measuring the above we note that the intensity of
backlight goes to zero(OFF) when the value in not zero almost nearing to
zero(some x%). so the graph looks like
intensity
| /
| /
| /
| |
------------
0 x max_brightness
In order to overcome this drawback knowing this x% i.e nothing but the low
threshold beyond which the backlight is off and will have no effect, the
brightness value is being offset by the low threshold value(retaining the
linearity of the graph). Now the graph becomes
intensity
| /
| /
| /
| /
-------------
0 max_brightness
With this for each and every digit increment in the brightness from zero
there is a change in the intensity of backlight. Devices having this
behaviour can set the low threshold brightness(lth_brightness) and pass
the same as platform data else can have it as zero.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-on: http://git-master/r/23099
(cherry picked from commit 92db79791aa60cacb3fa90d1cb2e942420c29408)
Change-Id: Icbe49b593dfa6608934ff274b4c9281e43c30b5c
Reviewed-on: http://git-master/r/23724
Tested-by: Gaurav Sarode <gsarode@nvidia.com>
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Update Invensense Motion Library (MPL) to production version
v3.3.3. Previous version was engineering release and is not
suitable for mass production. This version of the MPL most
notably fixes problems with suspend/resume where touch screen
would quit working during a suspend/resume cycle.
Change-Id: Ia33433a677862b3d1e31d410aac7176d7a381a8f
Reviewed-on: http://git-master/r/22987
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
Correct PRE_BYPASS (clock scaler 32kHz/1kHz select) bitfield.
Add platform data to tune RTC XTAL capacitance in board file.
Bug 798832, Tested on Ventana/wake via Alarm Clock
Change-Id: I82d67610a815866707fc1db934d7d4d7cf93d883
Reviewed-on: http://git-master/r/22402
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Reviewed-by: David Schalig <dschalig@nvidia.com>
Reviewed-by: Jonathan Mayo <jmayo@nvidia.com>
|
|
TPS6586x SM0, SM1 and SM2 port have 2 power switching modes:
- PWM only, or
- PMW-PFM auto mode
Some of TPS6586x have voltage spike in PFM-to-FWM transition can lockup
the CPU if choose PWM-PFM auto mode.
This patch enables such mode selection on SMs ports from the board level
power configuration file.
BUG 796364
Change-Id: I7015798151d6753ff5dcc329703338fde105e2b0
Reviewed-on: http://git-master/r/22701
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
Reviewed-by: Xin Xie <xxie@nvidia.com>
Tested-by: Xin Xie <xxie@nvidia.com>
|
|
Add an api to power off max8907c by setting power off bit in RESET_CNFG reg.
Bug 799957
Bug 800602 (Cold boot)
Change-Id: Ie0206d684a86fecc75273c1d3b087bb2d47b4c56
Reviewed-on: http://git-master/r/22385
Tested-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
* Move include/linux/tegra_usb.h to
include/linux/platform_data/tegra_usb.h
Change-Id: I5b7799c5af8029b15ad206978718b337afac8814
Reviewed-on: http://git-master/r/22165
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
Tested-by: Daniel Willemsen <dwillemsen@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Nitin Kumbhar <nkumbhar@nvidia.com>
|
|
Following are the fixes;
- Supportng half duplex.
- Only using SW based CS.
- Write to readback with command register does not work. Fixing issue.
- Using cpu based transfer for smaller size and dma based for larger size.
- reading proper transfer status after every transaction.
bug 791149
bug 791780
Change-Id: I293b3f1b571276f5d8fe4ad4da67f827926e4b73
Reviewed-on: http://git-master/r/20581
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Amit Kamath <akamath@nvidia.com>
|
|
Conflicts:
arch/arm/mach-tegra/include/mach/system.h
arch/arm/mach-tegra/include/mach/usb_phy.h
arch/arm/mach-tegra/usb_phy.c
drivers/usb/host/ehci-tegra.c
drivers/video/tegra/dc/dc.c
drivers/video/tegra/dc/hdmi.c
include/linux/tegra_usb.h
Change-Id: Ic1f4f2b360893e8de6b867a8ecc239aca02367da
|
|
This change allows the max8907c to wake the system when receiving an
irq. It also masks all non-wake conditions from causing an irq when
going into suspend and unmasks these conditions when resuming to not
cause spurious wake-up events.
Change-Id: I5eadb929ff4aded8a6ec11426ab424f0f692c042
Reviewed-on: http://git-master/r/20100
Tested-by: Thomas Cherry <tcherry@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
|
|
Add generic access ops for controllers with a ulpi viewport register
(e.g. Chipidea based controller).
Change-Id: I53d50857d4716f8df708af199ad1def1ff9d4beb
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Change-Id: I846d43b1ecbe6c726f024b6a0fb318d6300a3746
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
Change-Id: Ic093d07858eb6e27aae9cd04d4c59407b5b1d76d
Signed-off-by: Benoit Goby <benoit@android.com>
|
|
The driver now supports thermal throttling.
When the temperature reaches a certain threshold,
thermal throttling is enabled and when the chip cools
off to a certain threshold, throttling is disabled.
Bug 786378
Change-Id: I7e769bd98e0bfe0d1f2decdba4432f91a0133d54
Reviewed-on: http://git-master/r/20372
Tested-by: Prashant Gaikwad <pgaikwad@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
bug 773671
Change-Id: Ib93f0dcb7e22220fe297c81d403c401548f3c649
Reviewed-on: http://git-master/r/18280
Tested-by: Joseph Lehrer <jlehrer@nvidia.com>
Reviewed-by: Thomas Cherry <tcherry@nvidia.com>
Reviewed-by: Jonathan Mayo <jmayo@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
|
|
Added support to tegra_hsuart driver for bluetooth wakeup.
Bug 773186
Change-Id: Id8f1face1b99942fd13949d0815a1dedd1a5a5d0
Reviewed-on: http://git-master/r/19586
Reviewed-by: Anantha Idapalapati <aidapalapati@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Anantha Idapalapati <aidapalapati@nvidia.com>
|
|
Conflicts:
drivers/net/wireless/bcm4329/Makefile
Change-Id: I5e6994d4db216062b9cd1673f45bd9fdcf1f96ae
|
|
This driver supports devices conforming to the Communication Device
Class (CDC) Network Control Model. The CDC specifications are
available from <http://www.usb.org/>. This driver is implemented as
a minidriver for usbnet driver framework.
Bug 776360
Change-Id: If5e900f80edebc742536a59716aad546b714ba4c
Reviewed-on: http://git-master/r/14921
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Tested-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
The original commit went upstream, this is to fix a merge issue from a
slightly different version coming back.
Change-Id: I69a58a483e58a0ee1a13521a466709f5cad6505f
Reviewed-on: http://git-master/r/19663
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
Tested-by: Daniel Willemsen <dwillemsen@nvidia.com>
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
Reviewed-by: Nitin Kumbhar <nkumbhar@nvidia.com>
|
|
|
|
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
|
|
devices""
This reverts commit 6b53bad8ac54b3d748c4b0dbe6b0a4ed6e2e60f4.
|
|
Conflicts:
drivers/usb/host/ehci-tegra.c
include/linux/usb.h
include/linux/usb/hcd.h
Change-Id: I2499459b717e36a2a994af9d7a5ae1ecb5e7ca9c
|
|
|
|
|
|
This reverts commit f0b0e4bec1e89014f3dcef4da8bcf95428cc771c.
The reverted commit incorrectly calculates the size of eMMC
devices in some (all?) cases.
This revert may cause problems in cases where the bootloader was
bug-compatible and puts a GPT partition at the incorrect end of
the eMMC device.
Change-Id: Ib006acf9e517b3b8f7570220c28e19c91e7b5f25
Signed-off-by: Colin Cross <ccross@android.com>
|
|
This reverts commit 2cdc235bbeb09b2b78cd02a94ab79c265861aea9.
The reverted commit incorrectly calculates the size of eMMC
devices in some (all?) cases.
This revert may cause problems in cases where the bootloader was
bug-compatible and puts a GPT partition at the incorrect end of
the eMMC device.
Change-Id: Icc9ddb3d294aa2a1caeddfe8fedd2e12aa7691e1
|
|
Based on the list of enabled USB functions, we can now switch the vendor ID
as well as the product ID.
Signed-off-by: Mike Lockwood <lockwood@android.com>
|
|
Conflicts:
drivers/video/tegra/dc/hdmi.c
Change-Id: Ia65c693bf49160e3906df68403129ba1e5545912
|
|
Provide optional hooks for the host controller driver to override the
default DMA mapping and unmapping routines. In general, these shouldn't
be necessary unless the host controller has special DMA requirements,
such as alignment contraints. If these are not specified, the
general usb_hcd_(un)?map_urb_for_dma functions will be used instead.
Also, pass the status to unmap_urb_for_dma so it can know whether the
DMA buffer has been overwritten.
Finally, add a flag to be used by these implementations if they
allocated a temporary buffer so it can be freed properly when unmapping.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The convention is to prefix symbols exported from the USB HCD core with
"usb_hcd". This change makes unmap_urb_setup_for_dma() and
unmap_urb_for_dma() consistent with that.
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Change-Id: I6fcdbcd0eb7103ac580deb94faf79959a5818ba1
|
|
Looks for ieee registration numver 0x000c03 as per HDMI spec.
Change-Id: I6875b24c66e8754510edabcb4f9ba682a50d6ac1
Signed-off-by: Erik Gilling <konkers@android.com>
|
|
BUG 771526
Corrected the mismatched CONFIG_SENSOR_KXTF9 and
CONFIG_SENSOR_AK8975 to CONFIG_SENSOR_KXTF9_MPU
and CONFIG_SENSOR_AK8975_MPU
Change-Id: I760bfdd5cbdd91acdf9ce10ee5be5fcfa0a9c5ab
Reviewed-on: http://git-master/r/18377
Reviewed-by: Wen Yi <wyi@nvidia.com>
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Robert R Collins <rcollins@nvidia.com>
Tested-by: Robert R Collins <rcollins@nvidia.com>
Reviewed-by: Jeremy Wyman <jwyman@nvidia.com>
Tested-by: Jeremy Wyman <jwyman@nvidia.com>
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
|
|
max8907c Charger Driver from maxim plus nvidia modifications
Integration from http://git-master/r/#change,15043
Change-Id: I8143fee9c99b43ad1089613236410dc8ad5bbca0
Reviewed-on: http://git-master/r/16134
Tested-by: Thomas Cherry <tcherry@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Change-Id: Iceb3ef8b11d4ce18fd3cb0947268744775b81758
Reviewed-on: http://git-master/r/17525
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>
|
|
added new entry for PORT_TEGRA in serial8250 driver and updated
flags and type of debug uart.
Bug : 782543
Change-Id: I3e6c59f7a24731e92bd48197c6b1b22acdba8a8f
Reviewed-on: http://git-master/r/17995
Tested-by: Pradeep Goudagunta <pgoudagunta@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Shail Dave <sdave@nvidia.com>
Reviewed-by: Scott Williams <scwilliams@nvidia.com>
|
|
Recently wake_peer op was added to uart_ops. Add this op for
tegra_hsuart allowing a platform to implement peer specific wakeup.
BUG 781303
Change-Id: Icfbac324815d7737c0e0820e57a2e8d844855ba0
Reviewed-on: http://git-master/r/17993
Tested-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
instead of clearing the irq for alarm enable/disable,
the proper bit in RTC_CONFIG has to be set/cleared.
tps6586 does not support 1/sec update counter so
remove support for update_irq_enable. replace it with
alarm_irq_enable.
Change-Id: Iee66a6625e810169253a750faf3f12d20d65d7d9
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/17990
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Clean up portions of max8907c.c driver
Add capability for bulk i2c read and write
Add capability for second i2c bus for rtc
Add capability for irq handling for rtc and battery charger
Change-Id: I6c2c2c42591aee766635a2e32a7404bb2591f4a7
Reviewed-on: http://git-master/r/16613
Tested-by: Thomas Cherry <tcherry@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
During resume, gpio-keys does not get updated state of gpios which
fails to report wakeup key event. Update resume routine to report
key event based on wakeup source.
BUG 745149
Change-Id: Iff7a9b431f9da8d226c8d3cd522725c3049fef07
Reviewed-on: http://git-master/r/17455
Tested-by: Nitin Kumbhar <nkumbhar@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Sometimes unexpected status like I2C busy status, Tx FIFO interrupted
and wait on Rx data etc is seen. Add a code to detect such conditions
and return -EAGAIN from driver. This will cause the i2c-core to retry
the transmission as per the retry count and time-out specified by the
platform data of the adapter.
Bug ID: 777455
Change-Id: Iac5971bca4d760d93cd2ed147f78fc2807315b4e
Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Reviewed-on: http://git-master/r/16212
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
This creates a new device node per head - /dev/tegra_dc%u. There are a
number of ioctls in linux/tegra_overlay.h to open, close, and flip
overlays.
This is a replacement for the extensions in the tegra fb interface, but
does not remove that functionality for compatibility reasons. Once
everyone has moved, we can remove the tegra fb extensions.
Change-Id: Id78a94482637a7ce229ec64eb5feaf2dec2b7804
Reviewed-on: http://git-master/r/16700
Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com>
Tested-by: Daniel Willemsen <dwillemsen@nvidia.com>
|
|
nct1008 driver will now reside in drivers/misc
Bug 742230
Change-Id: I774c920cf96ded96ae440a99935f6cb9f1f63323
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>
Reviewed-on: http://git-master/r/15496
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Add three alsa controls to expose selection of playback
device, capture device and call mode.Alsa kernel will
route pcm data to the selected output/input port.
bug 771510
Change-Id: Ibdeebbd799b2ae36046a77327ec8b6a3b01553a9
Reviewed-on: http://git-master/r/14729
Tested-by: Sumit Bhattacharya <sumitb@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>
|
|
Conflicts:
arch/arm/mach-tegra/fuse.c
drivers/misc/Makefile
Change-Id: I300b925d78b31efe00c342190d8dbd50e2e81230
|
|
Conflicts:
drivers/misc/Kconfig
drivers/misc/Makefile
Change-Id: I826244513f799fdd2fb0269abad3271c96661293
|