| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.10/block
Pull MD fixes from Song:
"These changes contain various fixes by Yu Kuai, Li Nan, and
Florian-Ewald Mueller."
* tag 'md-6.10-20240425' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: don't account sync_io if iostats of the disk is disabled
md: Fix overflow in is_mddev_idle
md: add check for sleepers in md_wakeup_thread()
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
|
|
A zone write plug BIO work function blk_zone_wplug_bio_work() calls
submit_bio_noacct_nocheck() to execute the next unplugged BIO. This
function may block. So executing zone plugs BIO works using the block
layer global kblockd workqueue can potentially lead to preformance or
latency issues as the number of concurrent work for a workqueue is
limited to WQ_DFL_ACTIVE (256).
1) For a system with a large number of zoned disks, issuing write
requests to otherwise unused zones may be delayed wiating for a work
thread to become available.
2) Requeue operations which use kblockd but are independent of zone
write plugging may alsoi end up being delayed.
To avoid these potential performance issues, create a workqueue per
zoned device to execute zone plugs BIO work. The workqueue max active
parameter is set to the maximum number of zone write plugs allocated
with the zone write plug mempool. This limit is equal to the maximum
number of open zones of the disk and defaults to 128 for disks that do
not have a limit on the number of open zones.
Fixes: dd291d77cc90 ("block: Introduce zone write plugging")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240420075811.1276893-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
With the block layer zone write plugging being automatically done for
any write operation to a zone of a zoned block device, a regular request
plugging handled through current->plug can only ever see at most a
single write request per zone. In such case, any potential reordering
of the plugged requests will be harmless. We can thus remove the special
casing for write operations to zones and have these requests plugged as
well. This allows removing the function blk_mq_plug and instead directly
using current->plug where needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-29-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zone write locking is now unused and replaced with zone write plugging.
Remove all code that was implementing zone write locking, that is, the
various helper functions controlling request zone write locking and
the gendisk attached zone bitmaps.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-27-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only elevator feature ever implemented is ELEVATOR_F_ZBD_SEQ_WRITE
for signaling that a scheduler implements zone write locking to tightly
control the dispatching order of write operations to zoned block
devices. With the removal of zone write locking support in mq-deadline
and the reliance of all block device drivers on the block layer zone
write plugging to control ordering of write operations to zones, the
elevator feature ELEVATOR_F_ZBD_SEQ_WRITE is completely unused.
Remove it, and also remove the now unused code for filtering the
possible schedulers for a block device based on required features.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-23-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The only user of blk_revalidate_disk_zones() second argument was the
SCSI disk driver (sd). Now that this driver does not require this
update_driver_data argument, remove it to simplify the interface of
blk_revalidate_disk_zones(). Also update the function kdoc comment to
be more accurate (i.e. there is no gendisk ->revalidate method).
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-21-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The zone append emulation of the scsi disk driver was the only driver
using BLK_STS_ZONE_RESOURCE. With this code removed,
BLK_STS_ZONE_RESOURCE is now unused. Remove this macro definition and
simplify blk_mq_dispatch_rq_list() where this status code was handled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-20-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Given that zone write plugging manages all writes to zones of a zoned
block device and tracks the write pointer position of all zones that are
not full nor empty, emulating zone append operations using regular
writes can be implemented generically, without relying on the underlying
device driver to implement such emulation. This is needed for devices
that do not natively support the zone append command (e.g. SMR
hard-disks).
A device may request zone append emulation by setting its
max_zone_append_sectors queue limit to 0. For such device, the function
blk_zone_wplug_prepare_bio() changes zone append BIOs into
non-mergeable regular write BIOs. Modified zone append BIOs are flagged
with the new BIO flag BIO_EMULATES_ZONE_APPEND. This flag is checked
on completion of the BIO in blk_zone_write_plug_bio_endio() to restore
the original REQ_OP_ZONE_APPEND operation code of the BIO.
The block layer internal inline helper function bio_is_zone_append() is
added to test if a BIO is either a native zone append operation
(REQ_OP_ZONE_APPEND operation code) or if it is flagged with
BIO_EMULATES_ZONE_APPEND. Given that both native and emulated zone
append BIO completion handling should be similar, The functions
blk_update_request() and blk_zone_complete_request_bio() are modified to
use bio_is_zone_append() to execute blk_zone_update_request_bio() for
both native and emulated zone append operations.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-11-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.
blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.
The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.
In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.
For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In preparation for adding zone write plugging, modify
blk_revalidate_disk_zones() to get the capacity of zones of a zoned
block device. This capacity value as a number of 512B sectors is stored
in the gendisk zone_capacity field.
Given that host-managed SMR disks (including zoned UFS drives) and all
known NVMe ZNS devices have the same zone capacity for all zones
blk_revalidate_disk_zones() returns an error if different capacities are
detected for different zones.
This also adds check to verify that the values reported by the device
for zone capacities are correct, that is, that the zone capacity is
never 0, does not exceed the zone size and is equal to the zone size for
conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-7-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Implement the inline helper functions bio_straddles_zones() and
bio_offset_from_zone_start() to respectively test if a BIO crosses a
zone boundary (the start sector and last sector belong to different
zones) and to obtain the offset of a BIO from the start sector of its
target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBSAN reports this problem:
UBSAN: Undefined behaviour in drivers/md/md.c:8175:15
signed integer overflow:
-2147483291 - 2072033152 cannot be represented in type 'int'
Call trace:
dump_backtrace+0x0/0x310
show_stack+0x28/0x38
dump_stack+0xec/0x15c
ubsan_epilogue+0x18/0x84
handle_overflow+0x14c/0x19c
__ubsan_handle_sub_overflow+0x34/0x44
is_mddev_idle+0x338/0x3d8
md_do_sync+0x1bb8/0x1cf8
md_thread+0x220/0x288
kthread+0x1d8/0x1e0
ret_from_fork+0x10/0x18
'curr_events' will overflow when stat accum or 'sync_io' is greater than
INT_MAX.
Fix it by changing sync_io, last_events and curr_events to 64bit.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240117031946.2324519-2-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
This is a simple combination of bio_list_merge + bio_list_init
similar to list_splice_init. While it only saves a single
line in a callers, it makes the move all bios from one list to
another and reinitialize the original pattern a lot more obvious
in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix an unused function warning on irqchip/irq-armada-370-xp
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-370-xp: Suppress unused-function warning
genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a procfs failure when requesting an interrupt with a label
containing the '/' character
- add missing stubs for GPIO lookup functions for !GPIOLIB
- fix debug messages that would print "(null)" for NULL strings
* tag 'gpio-fixes-for-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix debug messaging in gpiod_find_and_request()
gpiolib: Add stubs for GPIO lookup functions
gpio: cdev: sanitize the label before requesting the interrupt
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, WiFi and netfilter.
Current release - regressions:
- ipv6: fix address dump when IPv6 is disabled on an interface
Current release - new code bugs:
- bpf: temporarily disable atomic operations in BPF arena
- nexthop: fix uninitialized variable in nla_put_nh_group_stats()
Previous releases - regressions:
- bpf: protect against int overflow for stack access size
- hsr: fix the promiscuous mode in offload mode
- wifi: don't always use FW dump trig
- tls: adjust recv return with async crypto and failed copy to
userspace
- tcp: properly terminate timers for kernel sockets
- ice: fix memory corruption bug with suspend and rebuild
- at803x: fix kernel panic with at8031_probe
- qeth: handle deferred cc1
Previous releases - always broken:
- bpf: fix bug in BPF_LDX_MEMSX
- netfilter: reject table flag and netdev basechain updates
- inet_defrag: prevent sk release while still in use
- wifi: pick the version of SESSION_PROTECTION_NOTIF
- wwan: t7xx: split 64bit accesses to fix alignment issues
- mlxbf_gige: call request_irq() after NAPI initialized
- hns3: fix kernel crash when devlink reload during pf
initialization"
* tag 'net-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
inet: inet_defrag: prevent sk release while still in use
Octeontx2-af: fix pause frame configuration in GMP mode
net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips
net: bcmasp: Remove phy_{suspend/resume}
net: bcmasp: Bring up unimac after PHY link up
net: phy: qcom: at803x: fix kernel panic with at8031_probe
netfilter: arptables: Select NETFILTER_FAMILY_ARP when building arp_tables.c
netfilter: nf_tables: skip netdev hook unregistration if table is dormant
netfilter: nf_tables: reject table flag and netdev basechain updates
netfilter: nf_tables: reject destroy command to remove basechain hooks
bpf: update BPF LSM designated reviewer list
bpf: Protect against int overflow for stack access size
bpf: Check bloom filter map value size
bpf: fix warning for crash_kexec
selftests: netdevsim: set test timeout to 10 minutes
net: wan: framer: Add missing static inline qualifiers
mlxbf_gige: call request_irq() after NAPI initialized
tls: get psock ref after taking rxlock to avoid leak
selftests: tls: add test with a partially invalid iov
tls: adjust recv return with async crypto and failed copy to userspace
...
|
|
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize.
Fixes: 7026b1ddb6b8 ("netfilter: Pass socket pointer down through okfn().")
Diagnosed-by: Eric Dumazet <edumazet@google.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+e5167d7144a62715044c@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240326101845.30836-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Various hotfixes. About half are cc:stable and the remainder address
post-6.8 issues or aren't considered suitable for backporting.
zswap figures prominently in the post-6.8 issues - folloup against the
large amount of changes we have just made to that code.
Apart from that, all over the map"
* tag 'mm-hotfixes-stable-2024-03-27-11-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
crash: use macro to add crashk_res into iomem early for specific arch
mm: zswap: fix data loss on SWP_SYNCHRONOUS_IO devices
selftests/mm: fix ARM related issue with fork after pthread_create
hexagon: vmlinux.lds.S: handle attributes section
userfaultfd: fix deadlock warning when locking src and dst VMAs
tmpfs: fix race on handling dquot rbtree
selftests/mm: sigbus-wp test requires UFFD_FEATURE_WP_HUGETLBFS_SHMEM
mm: zswap: fix writeback shinker GFP_NOIO/GFP_NOFS recursion
ARM: prctl: reject PR_SET_MDWE on pre-ARMv6
prctl: generalize PR_SET_MDWE support check to be per-arch
MAINTAINERS: remove incorrect M: tag for dm-devel@lists.linux.dev
mm: zswap: fix kernel BUG in sg_init_one
selftests: mm: restore settings from only parent process
tools/Makefile: remove cgroup target
mm: cachestat: fix two shmem bugs
mm: increase folio batch size
mm,page_owner: fix recursion
mailmap: update entry for Leonard Crestez
init: open /initrd.image with O_LARGEFILE
selftests/mm: Fix build with _FORTIFY_SOURCE
...
|
|
Compilation with CONFIG_GENERIC_FRAMER disabled lead to the following
warnings:
framer.h:184:16: warning: no previous prototype for function 'framer_get' [-Wmissing-prototypes]
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:184:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
184 | struct framer *framer_get(struct device *dev, const char *con_id)
framer.h:189:6: warning: no previous prototype for function 'framer_put' [-Wmissing-prototypes]
189 | void framer_put(struct device *dev, struct framer *framer)
framer.h:189:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
189 | void framer_put(struct device *dev, struct framer *framer)
Add missing 'static inline' qualifiers for these functions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403241110.hfJqeJRu-lkp@intel.com/
Fixes: 82c944d05b1a ("net: wan: Add framer framework support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Patch series "ARM: prctl: Reject PR_SET_MDWE where not supported".
I noticed after a recent kernel update that my ARM926 system started
segfaulting on any execve() after calling prctl(PR_SET_MDWE). After some
investigation it appears that ARMv5 is incapable of providing the
appropriate protections for MDWE, since any readable memory is also
implicitly executable.
The prctl_set_mdwe() function already had some special-case logic added
disabling it on PARISC (commit 793838138c15, "prctl: Disable
prctl(PR_SET_MDWE) on parisc"); this patch series (1) generalizes that
check to use an arch_*() function, and (2) adds a corresponding override
for ARM to disable MDWE on pre-ARMv6 CPUs.
With the series applied, prctl(PR_SET_MDWE) is rejected on ARMv5 and
subsequent execve() calls (as well as mmap(PROT_READ|PROT_WRITE)) can
succeed instead of unconditionally failing; on ARMv6 the prctl works as it
did previously.
[0] https://lore.kernel.org/all/2023112456-linked-nape-bf19@gregkh/
This patch (of 2):
There exist systems other than PARISC where MDWE may not be feasible to
support; rather than cluttering up the generic code with additional
arch-specific logic let's add a generic function for checking MDWE support
and allow each arch to override it as needed.
Link: https://lkml.kernel.org/r/20240227013546.15769-4-zev@bewilderbeest.net
Link: https://lkml.kernel.org/r/20240227013546.15769-5-zev@bewilderbeest.net
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Acked-by: Helge Deller <deller@gmx.de> [parisc]
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Russell King (Oracle) <linux@armlinux.org.uk>
Cc: Sam James <sam@gentoo.org>
Cc: Stefan Roesch <shr@devkernel.io>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yin Fengwei <fengwei.yin@intel.com>
Cc: <stable@vger.kernel.org> [6.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
On a 104 thread, 2 socket Skylake system, Intel report a 4.7% performance
reduction with will-it-scale page_fault2. This was due to reducing the
size of the batch from 32 to 15. Increasing the folio batch size from 15
to 31 gives a performance increase of 12.5% relative to the original, or
17.2% relative to the reduced performance commit.
The penalty of this commit is an additional 128 bytes of stack usage. Six
folio_batches are also allocated from percpu memory in cpu_fbatches so
that will be an additional 768 bytes of percpu memory (per CPU). Tim Chen
originally submitted a patch like this in 2020:
https://lore.kernel.org/linux-mm/d1cc9f12a8ad6c2a52cb600d93b06b064f2bbc57.1593205965.git.tim.c.chen@linux.intel.com/
Link: https://lkml.kernel.org/r/20240315140823.2478146-1-willy@infradead.org
Fixes: 99fbb6bfc16f ("mm: make folios_put() the basis of release_pages()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403151058.7048f6a8-oliver.sang@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The gpio_device_find_by_() functions do not have stubs which means that if
they are referenced from code with an optiona dependency on gpiolib then
the code will fail to link. Add stubs for lookups via fwnode and label. I
have not added a stub for plain gpio_device_find() since it seems harder to
see a use case for that which does not depend on gpiolib.
With the addition of the GPIO reset controller (which lacks a gpiolib
dependency) to the arm64 defconfig this is causing build breaks for arm64
virtconfig in -next:
aarch64-linux-gnu-ld: drivers/reset/core.o: in function `__reset_add_reset_gpio_lookup':
/build/stage/linux/drivers/reset/core.c:861:(.text+0xccc): undefined reference to `gpio_device_find_by_fwnode'
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There is a problem when a driver requests a shared interrupt line to run a
threaded handler on it without IRQF_ONESHOT set if that flag has been set
already for the IRQ in question by somebody else. Namely, the request
fails which usually leads to a probe failure even though the driver might
have worked just fine with IRQF_ONESHOT, but it does not want to use it by
default. Currently, the only way to handle this is to try to request the
IRQ without IRQF_ONESHOT, but with IRQF_PROBE_SHARED set and if this fails,
try again with IRQF_ONESHOT set. However, this is a bit cumbersome and not
very clean.
When commit 7a36b901a6eb ("ACPI: OSL: Use a threaded interrupt handler for
SCI") switched the ACPI subsystem over to using a threaded interrupt
handler for the SCI, it had to use IRQF_ONESHOT for it because that's
required due to the way the SCI handler works (it needs to walk all of the
enabled GPEs before the interrupt line can be unmasked). The SCI interrupt
line is not shared with other users very often due to the SCI handling
overhead, but on sone systems it is shared and when the other user of it
attempts to install a threaded handler, a flags mismatch related to
IRQF_ONESHOT may occur.
As it turned out, that happened to the pinctrl-amd driver and so commit
4451e8e8415e ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
attempted to address the issue by adding IRQF_ONESHOT to the interrupt
flags in that driver, but this is now causing an IRQF_ONESHOT-related
mismatch to occur on another system which cannot boot as a result of it.
Clearly, pinctrl-amd can work with IRQF_ONESHOT if need be, but it should
not set that flag by default, so it needs a way to indicate that to the
interrupt subsystem.
To that end, introdcuce a new interrupt flag, IRQF_COND_ONESHOT, which will
only have effect when the IRQ line is shared and IRQF_ONESHOT has been set
for it already, in which case it will be promoted to the latter.
This is sufficient for drivers sharing the interrupt line with the SCI as
it is requested by the ACPI subsystem before any drivers are probed, so
they will always see IRQF_ONESHOT set for the interrupt in question.
Fixes: 4451e8e8415e ("pinctrl: amd: Add IRQF_ONESHOT to the interrupt request")
Reported-by: Francisco Ayala Le Brun <francisco@videowindow.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Closes: https://lore.kernel.org/lkml/CAN-StX1HqWqi+YW=t+V52-38Mfp5fAz7YHx4aH-CQjgyNiKx3g@mail.gmail.com/
Link: https://lore.kernel.org/r/12417336.O9o76ZdvQC@kreacher
|
|
Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop
management") introduced the manage_system_start_stop scsi_device flag to
allow libata to indicate to the SCSI disk driver that nothing should be
done when resuming a disk on system resume. This change turned the
execution of sd_resume() into a no-op for ATA devices on system
resume. While this solved deadlock issues during device resume, this change
also wrongly removed the execution of opal_unlock_from_suspend(). As a
result, devices with TCG OPAL locking enabled remain locked and
inaccessible after a system resume from sleep.
To fix this issue, introduce the SCSI driver resume method and implement it
with the sd_resume() function calling opal_unlock_from_suspend(). The
former sd_resume() function is renamed to sd_resume_common() and modified
to call the new sd_resume() function. For non-ATA devices, this result in
no functional changes.
In order for libata to explicitly execute sd_resume() when a device is
resumed during system restart, the function scsi_resume_device() is
introduced. libata calls this function from the revalidation work executed
on devie resume, a state that is indicated with the new device flag
ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked
on resume, allowing normal operation.
Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
|
|
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver (Geert
Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
* tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: panel-tpo-td043mtea1: Convert sprintf() to sysfs_emit()
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbcon: Increase maximum font width x height to 64 x 128
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
fbdev: mb862xxfb: Fix defined but not used error
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH
|
|
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it
broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell,
and apparently it is relying on SHA-1 signature support. These UAPIs
are fairly obscure, and their documentation does not mention which
algorithms they support. iwd really should be using a properly
supported userspace crypto library instead. Regardless, since something
broke we have to revert the change.
It may be possible that some parts of this commit can be reinstated
without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but
for now this just does a full revert to get things working again.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsytem:
- rtc_class is now const
Drivers:
- ds1511: cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support"
* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
rtc: class: make rtc_class constant
dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
rtc: nct3018y: fix possible NULL dereference
rtc: max31335: fix interrupt status reg
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
dt-bindings: rtc: abx80x: convert to yaml
rtc: m41t80: Use the unified property API get the wakeup-source property
dt-bindings: at91rm9260-rtt: add sam9x7 compatible
dt-bindings: rtc: convert MT7622 RTC to the json-schema
dt-bindings: rtc: convert MT2717 RTC to the json-schema
rtc: pcf8523: add suspend handlers for alarm IRQ
rtc: ds1511: set alarm offset limit
rtc: ds1511: set range
rtc: ds1511: drop inline/noinline hints
rtc: ds1511: rename pdata
rtc: ds1511: implement ds1511_rtc_read_alarm properly
rtc: ds1511: remove partial alarm support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Add Zhihao Cheng as reviewer
- Attach via device tree
- Add NVMEM layer
- Various fastmap related fixes
UBIFS:
- Add Zhihao Cheng as reviewer
- Convert to folios
- Various fixes (memory leaks in error paths, function prototypes)"
* tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits)
mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems
mtd: ubi: provide NVMEM layer over UBI volumes
mtd: ubi: populate ubi volume fwnode
mtd: ubi: introduce pre-removal notification for UBI volumes
mtd: ubi: attach from device tree
mtd: ubi: block: use notifier to create ubiblock from parameter
dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
dt-bindings: mtd: add basic bindings for UBI
ubifs: Queue up space reservation tasks if retrying many times
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed
ubi: Correct the number of PEBs after a volume resize failure
ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130
ubi: correct the calculation of fastmap size
ubifs: Remove unreachable code in dbg_check_ltab_lnum
ubifs: fix function pointer cast warnings
ubifs: fix sort function prototype
ubi: Check for too small LEB size in VTBL code
MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer
ubifs: Convert populate_page() to take a folio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter, wireguard and IPsec.
I'd like to highlight [ lowlight? - Linus ] Florian W stepping down as
a netfilter maintainer due to constant stream of bug reports. Not sure
what we can do but IIUC this is not the first such case.
Current release - regressions:
- rxrpc: fix use of page_frag_alloc_align(), it changed semantics and
we added a new caller in a different subtree
- xfrm: allow UDP encapsulation only in offload modes
Current release - new code bugs:
- tcp: fix refcnt handling in __inet_hash_connect()
- Revert "net: Re-use and set mono_delivery_time bit for userspace
tstamp packets", conflicted with some expectations in BPF uAPI
Previous releases - regressions:
- ipv4: raw: fix sending packets from raw sockets via IPsec tunnels
- devlink: fix devlink's parallel command processing
- veth: do not manipulate GRO when using XDP
- esp: fix bad handling of pages from page_pool
Previous releases - always broken:
- report RCU QS for busy network kthreads (with Paul McK's blessing)
- tcp/rds: fix use-after-free on netns with kernel TCP reqsk
- virt: vmxnet3: fix missing reserved tailroom with XDP
Misc:
- couple of build fixes for Documentation"
* tag 'net-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
selftests: forwarding: Fix ping failure due to short timeout
MAINTAINERS: step down as netfilter maintainer
netfilter: nf_tables: Fix a memory leak in nf_tables_updchain
net: dsa: mt7530: fix handling of all link-local frames
net: dsa: mt7530: fix link-local frames that ingress vlan filtering ports
bpf: report RCU QS in cpumap kthread
net: report RCU QS on threaded NAPI repolling
rcu: add a helper to report consolidated flavor QS
ionic: update documentation for XDP support
lib/bitmap: Fix bitmap_scatter() and bitmap_gather() kernel doc
netfilter: nf_tables: do not compare internal table flags on updates
netfilter: nft_set_pipapo: release elements in clone only from destroy path
octeontx2-af: Use separate handlers for interrupts
octeontx2-pf: Send UP messages to VF only when VF is up.
octeontx2-pf: Use default max_active works instead of one
octeontx2-pf: Wait till detach_resources msg is complete
octeontx2: Detect the mbox up or down message via register
devlink: fix port new reply cmd type
tcp: Clear req->syncookie in reqsk_alloc().
net/bnx2x: Prevent access to a freed page in page_pool
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Generate a list of built DTB files (arch/*/boot/dts/dtbs-list)
- Use more threads when building Debian packages in parallel
- Fix warnings shown during the RPM kernel package uninstallation
- Change OBJECT_FILES_NON_STANDARD_*.o etc. to take a relative path to
Makefile
- Support GCC's -fmin-function-alignment flag
- Fix a null pointer dereference bug in modpost
- Add the DTB support to the RPM package
- Various fixes and cleanups in Kconfig
* tag 'kbuild-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (67 commits)
kconfig: tests: test dependency after shuffling choices
kconfig: tests: add a test for randconfig with dependent choices
kconfig: tests: support KCONFIG_SEED for the randconfig runner
kbuild: rpm-pkg: add dtb files in kernel rpm
kconfig: remove unneeded menu_is_visible() call in conf_write_defconfig()
kconfig: check prompt for choice while parsing
kconfig: lxdialog: remove unused dialog colors
kconfig: lxdialog: fix button color for blackbg theme
modpost: fix null pointer dereference
kbuild: remove GCC's default -Wpacked-bitfield-compat flag
kbuild: unexport abs_srctree and abs_objtree
kbuild: Move -Wenum-{compare-conditional,enum-conversion} into W=1
kconfig: remove named choice support
kconfig: use linked list in get_symbol_str() to iterate over menus
kconfig: link menus to a symbol
kbuild: fix inconsistent indentation in top Makefile
kbuild: Use -fmin-function-alignment when available
alpha: merge two entries for CONFIG_ALPHA_GAMMA
alpha: merge two entries for CONFIG_ALPHA_EV4
kbuild: change DTC_FLAGS_<basetarget>.o to take the path relative to $(obj)
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core and kernfs changes for 6.9-rc1.
Nothing all that crazy here, just some good updates that include:
- automatic attribute group hiding from Dan Williams (he fixed up my
horrible attempt at doing this.)
- kobject lock contention fixes from Eric Dumazet
- driver core cleanups from Andy
- kernfs rcu work from Tejun
- fw_devlink changes to resolve some reported issues
- other minor changes, all details in the shortlog
All of these have been in linux-next for a long time with no reported
issues"
* tag 'driver-core-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (28 commits)
device: core: Log warning for devices pending deferred probe on timeout
driver: core: Use dev_* instead of pr_* so device metadata is added
driver: core: Log probe failure as error and with device metadata
of: property: fw_devlink: Add support for "post-init-providers" property
driver core: Add FWLINK_FLAG_IGNORE to completely ignore a fwnode link
driver core: Adds flags param to fwnode_link_add()
debugfs: fix wait/cancellation handling during remove
device property: Don't use "proxy" headers
device property: Move enum dev_dma_attr to fwnode.h
driver core: Move fw_devlink stuff to where it belongs
driver core: Drop unneeded 'extern' keyword in fwnode.h
firmware_loader: Suppress warning on FW_OPT_NO_WARN flag
sysfs:Addresses documentation in sysfs_merge_group and sysfs_unmerge_group.
firmware_loader: introduce __free() cleanup hanler
platform-msi: Remove usage of the deprecated ida_simple_xx() API
sysfs: Introduce DEFINE_SIMPLE_SYSFS_GROUP_VISIBLE()
sysfs: Document new "group visible" helpers
sysfs: Fix crash on empty group attributes array
sysfs: Introduce a mechanism to hide static attribute_groups
sysfs: Introduce a mechanism to hide static attribute_groups
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of Staging driver cleanups for 6.9-rc1. Nothing
major in here, lots of small coding style cleanups for most drivers,
and the removal of some obsolete hardare (the emxx_udc and some
drivers/staging/board/ files).
All of these have been in linux-next for a long time with no reported
issues"
* tag 'staging-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (122 commits)
staging: greybus: Replaces directive __attribute__((packed)) by __packed as suggested by checkpatch
staging: greybus: Replace __attribute__((packed)) by __packed in various instances
Staging: rtl8192e: Rename function GetHalfNmodeSupportByAPsHandler()
Staging: rtl8192e: Rename function rtllib_FlushRxTsPendingPkts()
Staging: rtl8192e: Rename goto OnADDBARsp_Reject
Staging: rtl8192e: Rename goto OnADDBAReq_Fail
Staging: rtl8192e: Rename function rtllib_send_ADDBARsp()
Staging: rtl8192e: Rename function rtllib_send_ADDBAReq()
Staging: rtl8192e: Rename variable TxRxSelect
Staging: rtl8192e: Fix 5 chckpatch alignment warnings in rtl819x_BAProc.c
Staging: rtl8192e: Rename function MgntQuery_MgntFrameTxRate
Staging: rtl8192e: Rename boolean variable bHalfWirelessN24GMode
Staging: rtl8192e: Rename reference AllowAllDestAddrHandler
Staging: rtl8192e: Rename varoable asSta
Staging: rtl8192e: Rename varoable osCcxVerNum
Staging: rtl8192e: Rename variable CcxAironetBuf
Staging: rtl8192e: Rename variable osCcxAironetIE
Staging: rtl8192e: Rename variable AironetIeOui
Staging: rtl8192e: Rename variable asRsn
Staging: rtl8192e: Rename variable CcxVerNumBuf
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
|
|
Pull bitmap updates from Yury Norov:
"A couple of random cleanups plus a step-down patch from Andy"
* tag 'bitmap-for-6.9' of https://github.com/norov/linux:
bitmap: Step down as a reviewer
lib/find: optimize find_*_bit_wrap
lib/find_bit: Fix the code comments about find_next_bit_wrap
|
|
When under heavy load, network processing can run CPU-bound for many
tens of seconds. Even in preemptible kernels (non-RT kernel), this can
block RCU Tasks grace periods, which can cause trace-event removal to
take more than a minute, which is unacceptably long.
This commit therefore creates a new helper function that passes through
both RCU and RCU-Tasks quiescent states every 100 milliseconds. This
hard-coded value suffices for current workloads.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/90431d46ee112d2b0af04dbfe936faaca11810a5.1710877680.git.yan@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The make htmldoc command failed with the following error
... include/linux/bitmap.h:524: ERROR: Unexpected indentation.
... include/linux/bitmap.h:524: CRITICAL: Unexpected section title or transition.
Move the visual representation to a literal block.
Fixes: de5f84338970 ("lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpers")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-kernel/20240312153059.3ffde1b7@canb.auug.org.au/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240314120006.458580-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-19
1) Fix possible page_pool leak triggered by esp_output.
From Dragos Tatulea.
2) Fix UDP encapsulation in software GSO path.
From Leon Romanovsky.
* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Allow UDP encapsulation only in offload modes
net: esp: fix bad handling of pages from page_pool
====================
Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
|
|
Pull virtio updates from Michael Tsirkin:
- Per vq sizes in vdpa
- Info query for block devices support in vdpa
- DMA sync callbacks in vduse
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits)
virtio_net: rename free_old_xmit_skbs to free_old_xmit
virtio_net: unify the code for recycling the xmit ptr
virtio-net: add cond_resched() to the command waiting loop
virtio-net: convert rx mode setting to use workqueue
virtio: packed: fix unmap leak for indirect desc table
vDPA: report virtio-blk flush info to user space
vDPA: report virtio-block read-only info to user space
vDPA: report virtio-block write zeroes configuration to user space
vDPA: report virtio-block discarding configuration to user space
vDPA: report virtio-block topology info to user space
vDPA: report virtio-block MQ info to user space
vDPA: report virtio-block max segments in a request to user space
vDPA: report virtio-block block-size to user space
vDPA: report virtio-block max segment size to user space
vDPA: report virtio-block capacity to user space
virtio: make virtio_bus const
vdpa: make vdpa_bus const
vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min
vDPA/ifcvf: get_max_vq_size to return max size
virtio_vdpa: create vqs with the actual size
...
|
|
dev->state can be read in rx and tx fast paths.
netif_running() which needs dev->state is called from
- enqueue_to_backlog() [RX path]
- __dev_direct_xmit() [TX path]
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240314200845.3050179-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
