| Age | Commit message (Collapse) | Author |
|
We are still chasing some syzbot reports where we think a rogue dev_put()
is called with no corresponding prior dev_hold().
Unfortunately it eats a reference on dev->dev_refcnt taken by innocent
dev_hold_track(), meaning that the refcount saturation splat comes
too late to be useful.
Make sure that 'not tracked' dev_put() and dev_hold() better use
CONFIG_NET_DEV_REFCNT_TRACKER=y debug infrastructure:
Prior patch in the series allowed ref_tracker_alloc() and ref_tracker_free()
to be called with a NULL @trackerp parameter, and to use a separate refcount
only to detect too many put() even in the following case:
dev_hold_track(dev, tracker_1, GFP_ATOMIC);
dev_hold(dev);
dev_put(dev);
dev_put(dev); // Should complain loudly here.
dev_put_track(dev, tracker_1); // instead of here
Add clarification about netdev_tracker_alloc() role.
v2: I replaced the dev_put() in linkwatch_do_dev()
with __dev_put() because callers called netdev_tracker_free().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are still chasing a netdev refcount imbalance, and we suspect
we have one rogue dev_put() that is consuming a reference taken
from a dev_hold_track()
To detect this case, allow ref_tracker_alloc() and ref_tracker_free()
to be called with a NULL @trackerp parameter, and use a dedicated
refcount_t just for them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir
as dead.
Test the dead status from ref_tracker_alloc() and ref_tracker_free()
This should detect buggy dev_put()/dev_hold() happening too late
in netdevice dismantle process.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This fixes minor data-races in ip6_mc_input() and
batadv_mcast_mla_rtr_flags_softif_get_ipv6()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
phylink_set_10g_modes() is no longer used with the conversion of
drivers to phylink_generic_validate(), so we can remove it.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS recvmsg() passes user pages as destination for decrypt.
The decrypt operation is repeated record by record, each
record being 16kB, max. TLS allocates an sg_table and uses
iov_iter_get_pages() to populate it with enough pages to
fit the decrypted record.
Even though we decrypt a single message at a time we size
the sg_table based on the entire length of the iovec.
This leads to unnecessarily large allocations, risking
triggering OOM conditions.
Use iov_iter_truncate() / iov_iter_reexpand() to construct
a "capped" version of iov_iter_npages(). Alternatively we
could parametrize iov_iter_npages() to take the size as
arg instead of using i->count, or do something else..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
40GbE Intel Wired LAN Driver Updates 2022-02-03
This series contains updates to the i40e client header file and driver.
Mateusz disables HW TC offload by default.
Joe Damato removes a no longer used statistic.
Jakub Kicinski removes an unused enum from the client header file.
Jedrzej changes some admin queue commands to occur under atomic context
and adds new functions for admin queue MAC VLAN filters to avoid a
potential race that could occur due storing results in a structure that
could be overwritten by the next admin queue call.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, netfilter, and ieee802154.
Current release - regressions:
- Partially revert "net/smc: Add netlink net namespace support", fix
uABI breakage
- netfilter:
- nft_ct: fix use after free when attaching zone template
- nft_byteorder: track register operations
Previous releases - regressions:
- ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
- phy: qca8081: fix speeds lower than 2.5Gb/s
- sched: fix use-after-free in tc_new_tfilter()
Previous releases - always broken:
- tcp: fix mem under-charging with zerocopy sendmsg()
- tcp: add missing tcp_skb_can_collapse() test in
tcp_shift_skb_data()
- neigh: do not trigger immediate probes on NUD_FAILED from
neigh_managed_work, avoid a deadlock
- bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
false-positives
- netfilter: nft_reject_bridge: fix for missing reply from prerouting
- smc: forward wakeup to smc socket waitqueue after fallback
- ieee802154:
- return meaningful error codes from the netlink helpers
- mcr20a: fix lifs/sifs periods
- at86rf230, ca8210: stop leaking skbs on error paths
- macsec: add missing un-offload call for NETDEV_UNREGISTER of parent
- ax25: add refcount in ax25_dev to avoid UAF bugs
- eth: mlx5e:
- fix SFP module EEPROM query
- fix broken SKB allocation in HW-GRO
- IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows
- eth: amd-xgbe:
- fix skb data length underflow
- ensure reset of the tx_timer_active flag, avoid Tx timeouts
- eth: stmmac: fix runtime pm use in stmmac_dvr_remove()
- eth: e1000e: handshake with CSME starts from Alder Lake platforms"
* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
ax25: fix reference count leaks of ax25_dev
net: stmmac: ensure PTP time register reads are consistent
net: ipa: request IPA register values be retained
dt-bindings: net: qcom,ipa: add optional qcom,qmp property
tools/resolve_btfids: Do not print any commands when building silently
bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
net: sparx5: do not refer to skb after passing it on
Partially revert "net/smc: Add netlink net namespace support"
net/mlx5e: Avoid field-overflowing memcpy()
net/mlx5e: Use struct_group() for memcpy() region
net/mlx5e: Avoid implicit modify hdr for decap drop rule
net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
net/mlx5: E-Switch, Fix uninitialized variable modact
net/mlx5e: Fix handling of wrong devices during bond netevent
net/mlx5e: Fix broken SKB allocation in HW-GRO
net/mlx5e: Fix wrong calculation of header index in HW_GRO
...
|
|
It's not used.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
used"
This reverts commit 774a1221e862b343388347bac9b318767336b20b.
We need to finish all async code before the module init sequence is
done. In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule(). Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked. This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().
For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:
if (cpu < nr_cpu_ids)
error = work_on_cpu(cpu, local_pci_probe, &ddi);
else
error = local_pci_probe(&ddi);
We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread. As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.
The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)
modprobe pm80xx worker
...
do_init_module()
...
pci_call_probe()
work_on_cpu(local_pci_probe)
local_pci_probe()
pm8001_pci_probe()
scsi_scan_host()
async_schedule()
worker->flags |= PF_USED_ASYNC;
...
< return from worker >
...
if (current->flags & PF_USED_ASYNC) <--- false
async_synchronize_full();
Commit 21c3c5d28007 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221e862
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.
Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.
Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add connect/disconnect helper to assign private struct to the DSA switch.
Add support for Ethernet mgmt and MIB if the DSA driver provide an handler
to correctly parse and elaborate the data.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add struct to correctly parse a mib Ethernet packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add all the required define to prepare support for mgmt read/write in
Ethernet packet. Any packet of this type has to be dropped as the only
use of these special packet is receive ack for an mgmt write request or
receive data for an mgmt read request.
A struct is used that emulates the Ethernet header but is used for a
different purpose.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move tag_qca define to include dir linux/dsa as the qca8k require access
to the tagger define to support in-band mdio read/write using ethernet
packet.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields.
Use struct_group() in struct vlan_ethhdr around members h_dest and
h_source, so they can be referenced together. This will allow memcpy()
and sizeof() to more easily reason about sizes, improve readability,
and avoid future warnings about writing beyond the end of h_dest.
"pahole" shows no size nor member offset changes to struct vlan_ethhdr.
"objdump -d" shows no object code changes.
Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode
Pull unicode cleanup from Gabriel Krisman Bertazi:
"A fix from Christoph Hellwig merging the CONFIG_UNICODE_UTF8_DATA into
the previous CONFIG_UNICODE. It is -rc material since we don't want to
expose the former symbol on 5.17.
This has been living on linux-next for the past week"
* tag 'unicode-for-next-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/krisman/unicode:
unicode: clean up the Kconfig symbol confusion
|
|
After following the call tree of phy_set_max_speed(), it became clear
that this function never returns anything but 0, so we can change its
result type to *void* and drop the result checks from the three drivers
that actually bothered to do it...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_CGROUPS is disabled psi code generates the following
warnings:
kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes]
1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group,
| ^~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes]
1182 | void psi_trigger_destroy(struct psi_trigger *t)
| ^~~~~~~~~~~~~~~~~~~
kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes]
1249 | __poll_t psi_trigger_poll(void **trigger_ptr,
| ^~~~~~~~~~~~~~~~
Change the declarations of these functions in the header to provide the
prototypes even when they are unused.
Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com
Fixes: 0e94682b73bf ("psi: introduce psi monitor")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It has been reported that the tag setting operation on newly-allocated
pages can cause the page flags to be corrupted when performed
concurrently with other flag updates as a result of the use of
non-atomic operations.
Fix the problem by using a compare-exchange loop to update the tag.
Link: https://lkml.kernel.org/r/20220120020148.1632253-1-pcc@google.com
Link: https://linux-review.googlesource.com/id/I456b24a2b9067d93968d43b4bb3351c0cec63101
Fixes: 2813b9c02962 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As with the other members of folio, the offset of page->mapping and
folio->mapping must be the same. The compile-time check was
inadvertently removed during development. Add it back.
[willy@infradead.org: changelog redo]
Link: https://lkml.kernel.org/r/20220104011734.21714-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The CONFIG_SYSCTL=n stub returns the wrong type.
Fixes: ee9efac48a082 ("sysctl: add helper to register a sysctl mount point")
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes for 5.17-rc2 that resolve a
number of reported problems. These include:
- typec driver fixes
- xhci platform driver fixes for suspending
- ulpi core fix
- role.h build fix
- new device ids
- syzbot-reported bugfixes
- gadget driver fixes
- dwc3 driver fixes
- other small fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix segmentation fault in cdns_lost_power function
usb: dwc2: gadget: don't try to disable ep0 in dwc2_hsotg_suspend
usb: gadget: at91_udc: fix incorrect print type
usb: dwc3: xilinx: Fix error handling when getting USB3 PHY
usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0 mode
usb: xhci-plat: fix crash when suspend if remote wake enable
usb: common: ulpi: Fix crash in ulpi_match()
usb: gadget: f_sourcesink: Fix isoc transfer for USB_SPEED_SUPER_PLUS
ucsi_ccg: Check DEV_INT bit only when starting CCG4
USB: core: Fix hang in usb_kill_urb by adding memory barriers
usb-storage: Add unusual-devs entry for VL817 USB-SATA bridge
usb: typec: tcpm: Do not disconnect when receiving VSAFE0V
usb: typec: tcpm: Do not disconnect while receiving VBUS off
usb: typec: Don't try to register component master without components
usb: typec: Only attempt to link USB ports if there is fwnode
usb: typec: tcpci: don't touch CC line if it's Vconn source
usb: roles: fix include/linux/usb/role.h compile issue
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (Wu
Zheng)
- remove the unneeded ret variable in nvmf_dev_show (Changcheng
Deng)
- Fix for a hang regression introduced with a patch in the merge
window, where low queue depth devices would not always get woken
correctly (Laibin)
- Small series fixing an IO accounting issue with bio backed dm devices
(Mike, Yu)
* tag 'block-5.17-2022-01-28' of git://git.kernel.dk/linux-block:
dm: properly fix redundant bio-based IO accounting
dm: revert partial fix for redundant bio-based IO accounting
block: add bio_start_io_acct_time() to control start_time
blk-mq: Fix wrong wakeup batch configuration which will cause hang
nvme-fabrics: remove the unneeded ret variable in nvmf_dev_show
nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs
blk-mq: fix missing blk_account_io_done() in error path
block: fix memory leak in disk_register_independent_access_ranges
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security sybsystem fix from James Morris:
"Fix NULL pointer crash in LSM via Ceph, from Vivek Goyal"
* tag 'fixes-v5.17-lsm-ceph-null' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
security, lsm: dentry_init_security() Handle multi LSM registration
|
|
bio_start_io_acct_time() interface is like bio_start_io_acct() that
allows start_time to be passed in. This gives drivers the ability to
defer starting accounting until after IO is issued (but possibily not
entirely due to bio splitting).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Link: https://lore.kernel.org/r/20220128155841.39644-2-snitzer@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A ceph user has reported that ceph is crashing with kernel NULL pointer
dereference. Following is the backtrace.
/proc/version: Linux version 5.16.2-arch1-1 (linux@archlinux) (gcc (GCC)
11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Thu, 20 Jan 2022
16:18:29 +0000
distro / arch: Arch Linux / x86_64
SELinux is not enabled
ceph cluster version: 16.2.7 (dd0603118f56ab514f133c8d2e3adfc983942503)
relevant dmesg output:
[ 30.947129] BUG: kernel NULL pointer dereference, address:
0000000000000000
[ 30.947206] #PF: supervisor read access in kernel mode
[ 30.947258] #PF: error_code(0x0000) - not-present page
[ 30.947310] PGD 0 P4D 0
[ 30.947342] Oops: 0000 [#1] PREEMPT SMP PTI
[ 30.947388] CPU: 5 PID: 778 Comm: touch Not tainted 5.16.2-arch1-1 #1
86fbf2c313cc37a553d65deb81d98e9dcc2a3659
[ 30.947486] Hardware name: Gigabyte Technology Co., Ltd. B365M
DS3H/B365M DS3H, BIOS F5 08/13/2019
[ 30.947569] RIP: 0010:strlen+0x0/0x20
[ 30.947616] Code: b6 07 38 d0 74 16 48 83 c7 01 84 c0 74 05 48 39 f7 75
ec 31 c0 31 d2 89 d6 89 d7 c3 48 89 f8 31 d2 89 d6 89 d7 c3 0
f 1f 40 00 <80> 3f 00 74 12 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 31
ff
[ 30.947782] RSP: 0018:ffffa4ed80ffbbb8 EFLAGS: 00010246
[ 30.947836] RAX: 0000000000000000 RBX: ffffa4ed80ffbc60 RCX:
0000000000000000
[ 30.947904] RDX: 0000000000000000 RSI: 0000000000000000 RDI:
0000000000000000
[ 30.947971] RBP: ffff94b0d15c0ae0 R08: 0000000000000000 R09:
0000000000000000
[ 30.948040] R10: 0000000000000000 R11: 0000000000000000 R12:
0000000000000000
[ 30.948106] R13: 0000000000000001 R14: ffffa4ed80ffbc60 R15:
0000000000000000
[ 30.948174] FS: 00007fc7520f0740(0000) GS:ffff94b7ced40000(0000)
knlGS:0000000000000000
[ 30.948252] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 30.948308] CR2: 0000000000000000 CR3: 0000000104a40001 CR4:
00000000003706e0
[ 30.948376] Call Trace:
[ 30.948404] <TASK>
[ 30.948431] ceph_security_init_secctx+0x7b/0x240 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948582] ceph_atomic_open+0x51e/0x8a0 [ceph
49f9c4b9bf5be8760f19f1747e26da33920bce4b]
[ 30.948708] ? get_cached_acl+0x4d/0xa0
[ 30.948759] path_openat+0x60d/0x1030
[ 30.948809] do_filp_open+0xa5/0x150
[ 30.948859] do_sys_openat2+0xc4/0x190
[ 30.948904] __x64_sys_openat+0x53/0xa0
[ 30.948948] do_syscall_64+0x5c/0x90
[ 30.948989] ? exc_page_fault+0x72/0x180
[ 30.949034] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 30.949091] RIP: 0033:0x7fc7521e25bb
[ 30.950849] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00
00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 0
0 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14
25
Core of the problem is that ceph checks for return code from
security_dentry_init_security() and if return code is 0, it assumes
everything is fine and continues to call strlen(name), which crashes.
Typically SELinux LSM returns 0 and sets name to "security.selinux" and
it is not a problem. Or if selinux is not compiled in or disabled, it
returns -EOPNOTSUP and ceph deals with it.
But somehow in this configuration, 0 is being returned and "name" is
not being initialized and that's creating the problem.
Our suspicion is that BPF LSM is registering a hook for
dentry_init_security() and returns hook default of 0.
LSM_HOOK(int, 0, dentry_init_security, struct dentry *dentry,...)
I have not been able to reproduce it just by doing CONFIG_BPF_LSM=y.
Stephen has tested the patch though and confirms it solves the problem
for him.
dentry_init_security() is written in such a way that it expects only one
LSM to register the hook. Atleast that's the expectation with current code.
If another LSM returns a hook and returns default, it will simply return
0 as of now and that will break ceph.
Hence, suggestion is that change semantics of this hook a bit. If there
are no LSMs or no LSM is taking ownership and initializing security context,
then return -EOPNOTSUP. Also allow at max one LSM to initialize security
context. This hook can't deal with multiple LSMs trying to init security
context. This patch implements this new behavior.
Reported-by: Stephen Muth <smuth4@gmail.com>
Tested-by: Stephen Muth <smuth4@gmail.com>
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: <stable@vger.kernel.org> # 5.16.0
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: James Morris <jmorris@namei.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the buffer handling in pm_show_wakelocks() more robust and
drop an unused hibernation-related function.
Specifics:
- Make the buffer handling in pm_show_wakelocks() more robust by
using sysfs_emit_at() in it to generate output (Greg
Kroah-Hartman).
- Drop register_nosave_region_late() which is not used (Amadeusz
Sławiński)"
* tag 'pm-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Remove register_nosave_region_late()
PM: wakeup: simplify the output logic of pm_show_wakelocks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
"Fixes for userspace breakage caused by fsnotify changes ~3 years ago
and one fanotify cleanup"
* tag 'fsnotify_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: fix fsnotify hooks in pseudo filesystems
fsnotify: invalidate dcache before IN_DELETE event
fanotify: remove variable set but not used
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf and quota fixes from Jan Kara:
"Fixes for crashes in UDF when inode expansion fails and one quota
cleanup"
* tag 'fs_for_v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: cleanup double word in comment
udf: Restore i_lenAlloc when inode expansion fails
udf: Fix NULL ptr deref when converting from inline format
|
|
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct svc_xprt holds a long lived reference to a netns,
it is worth tracking it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For applications running on a mix of platforms it's useful
to have a clear indication whether host's NIC supports the
geometry requirements of TCP zero-copy. TCP zero-copy Rx
requires data to be neatly placed into memory pages.
Most NICs can't do that.
This patch is adding GET support only, since the NICs
I work with either always have the feature enabled or
enable it whenever MTU is set to jumbo. In other words
I don't need SET. But adding set should be trivial.
(The only note on SET is that we will likely want
the setting to be "sticky" and use 0 / `unknown`
to reset it back to driver default.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Vladimir points out that since we removed mii_lpa_to_linkmode_lpa_sgmii(),
mii_lpa_mod_linkmode_lpa_sgmii() is also no longer called.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2022-01-27
1) Dima, adds an internal mlx5 steering callback per steering provider
(FW vs SW steering), to advertise steering capabilities implemented by
each module, this helps upper modules in mlx5 to know what is
supported and what's not without the need to tell what is the underlying
steering mode.
2nd patch is the usecase where this interface is used to implement
Vlan Push/pop for uplink with SW steering, where in FW mode it's not
supported yet.
2) Roi Dayan improves code readability and maintainability
as preparation step for multi attribute instance per flow
in mlx5 TC module
Currently the mlx5_flow object contains a single mlx5_attr instance.
However, multi table actions (e.g. CT) instantiate multiple attr instances.
This is a refactoring series in a preparation to support multiple
attribute instances per flow.
The commits prepare functions to get attr instance instead of using
flow->attr and also using attr->flags if the flag is more relevant
to be attr flag and not a flow flag considering there will be multiple
attr instances. i.e. CT and SAMPLE flags.
* tag 'mlx5-updates-2022-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: VLAN push on RX, pop on TX
net/mlx5: Introduce software defined steering capabilities
net/mlx5: Remove unused TIR modify bitmask enums
net/mlx5e: CT, Remove redundant flow args from tc ct calls
net/mlx5e: TC, Store mapped tunnel id on flow attr
net/mlx5e: Test CT and SAMPLE on flow attr
net/mlx5e: Refactor eswitch attr flags to just attr flags
net/mlx5e: CT, Don't set flow flag CT for ct clear flow
net/mlx5e: TC, Hold sample_attr on stack instead of pointer
net/mlx5e: TC, Reject rules with multiple CT actions
net/mlx5e: TC, Refactor mlx5e_tc_add_flow_mod_hdr() to get flow attr
net/mlx5e: TC, Pass attr to tc_act can_offload()
net/mlx5e: TC, Split pedit offloads verify from alloc_tc_pedit_action()
net/mlx5e: TC, Move pedit_headers_action to parse_attr
net/mlx5e: Move counter creation call to alloc_flow_attr_counter()
net/mlx5e: Pass attr arg for attaching/detaching encaps
net/mlx5e: Move code chunk setting encap dests into its own function
====================
Link: https://lore.kernel.org/r/20220127204007.146300-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
struct mlx5_ifc_modify_tir_bitmask_bits is used for the bitmask
of MODIFY_TIR operations.
Remove the unused bitmask enums.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- tcp: add a missing sk_defer_free_flush() in tcp_splice_read()
- tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n
- nf_tables: set last expression in register tracking area
- nft_connlimit: fix memleak if nf_ct_netns_get() fails
- mptcp: fix removing ids bitmap setting
- bonding: use rcu_dereference_rtnl when getting active slave
- fix three cases of sleep in atomic context in drivers: lan966x, gve
- handful of build fixes for esoteric drivers after netdev->dev_addr
was made const
Previous releases - regressions:
- revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke
Linux compatibility with USGv6 tests
- procfs: show net device bound packet types
- ipv4: fix ip option filtering for locally generated fragments
- phy: broadcom: hook up soft_reset for BCM54616S
Previous releases - always broken:
- ipv4: raw: lock the socket in raw_bind()
- ipv4: decrease the use of shared IPID generator to decrease the
chance of attackers guessing the values
- procfs: fix cross-netns information leakage in /proc/net/ptype
- ethtool: fix link extended state for big endian
- bridge: vlan: fix single net device option dumping
- ping: fix the sk_bound_dev_if match in ping_lookup"
* tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
net: bridge: vlan: fix memory leak in __allowed_ingress
net: socket: rename SKB_DROP_REASON_SOCKET_FILTER
ipv4: remove sparse error in ip_neigh_gw4()
ipv4: avoid using shared IP generator for connected sockets
ipv4: tcp: send zero IPID in SYNACK messages
ipv4: raw: lock the socket in raw_bind()
MAINTAINERS: add missing IPv4/IPv6 header paths
MAINTAINERS: add more files to eth PHY
net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout()
net: bridge: vlan: fix single net device option dumping
net: stmmac: skip only stmmac_ptp_register when resume from suspend
net: stmmac: configure PTP clock source prior to PTP initialization
Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values"
connector/cn_proc: Use task_is_in_init_pid_ns()
pid: Introduce helper task_is_in_init_pid_ns()
gve: Fix GFP flags when allocing pages
net: lan966x: Fix sleep in atomic context when updating MAC table
net: lan966x: Fix sleep in atomic context when injecting frames
ethernet: seeq/ether3: don't write directly to netdev->dev_addr
ethernet: 8390/etherh: don't write directly to netdev->dev_addr
...
|
|
Rename SKB_DROP_REASON_SOCKET_FILTER, which is used
as the reason of skb drop out of socket filter before
it's part of a released kernel. It will be used for
more protocols than just TCP in future series.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/all/20220127091308.91401-2-imagedong@tencent.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Not used since v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Not used since added in v3.8.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The stubs under !CONFIG_IPV6 were missed when real functions
got deleted ca. v3.13.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No callers since v5.7, the initial use case seems pretty
esoteric so removing this should not harm the completeness
of the API.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
No callers since v3.15.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The only caller of mii_lpa_to_linkmode_lpa_sgmii()
disappeared in v5.10.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the kernel uses open code in multiple places to check if a
task is in the root PID namespace with the kind of format:
if (task_active_pid_ns(current) == &init_pid_ns)
do_something();
This patch creates a new helper function, task_is_in_init_pid_ns(), it
returns true if a passed task is in the root PID namespace, otherwise
returns false. So it will be used to replace open codes.
Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
stmmac explicitly calls the xpcs driver to validate the ethtool
linkmodes. This is no longer necessary as phylink now supports
validation through a PCS method. Convert both drivers to use this
new mechanism.
Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a function to the xpcs driver to retrieve the supported PHY
interface modes, which can be used by drivers to fill in phylink's
supported_interfaces mask.
We validate the interface bit index to ensure that it fits within the
bitmap as xpcs lists PHY_INTERFACE_MODE_MAX in an entry.
Tested-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> # Intel EHL Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Basic handling for case insensitive filesystems
- Initial support for fs_locations and server trunking
Bugfixes and Cleanups:
- Cleanups to how the "struct cred *" is handled for the
nfs_access_entry
- Ensure the server has an up to date ctimes before hardlinking or
renaming
- Update 'blocks used' after writeback, fallocate, and clone
- nfs_atomic_open() fixes
- Improvements to sunrpc tracing
- Various null check & indenting related cleanups
- Some improvements to the sunrpc sysfs code:
- Use default_groups in kobj_type
- Fix some potential races and reference leaks
- A few tracepoint cleanups in xprtrdma"
[ This should have gone in during the merge window, but didn't. The
original pull request - sent during the merge window - had gotten
marked as spam and discarded due missing DKIM headers in the email
from Anna. - Linus ]
* tag 'nfs-for-5.17-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (35 commits)
SUNRPC: Don't dereference xprt->snd_task if it's a cookie
xprtrdma: Remove definitions of RPCDBG_FACILITY
xprtrdma: Remove final dprintk call sites from xprtrdma
sunrpc: Fix potential race conditions in rpc_sysfs_xprt_state_change()
net/sunrpc: fix reference count leaks in rpc_sysfs_xprt_state_change
NFSv4.1 test and add 4.1 trunking transport
SUNRPC allow for unspecified transport time in rpc_clnt_add_xprt
NFSv4 handle port presence in fs_location server string
NFSv4 expose nfs_parse_server_name function
NFSv4.1 query for fs_location attr on a new file system
NFSv4 store server support for fs_location attribute
NFSv4 remove zero number of fs_locations entries error check
NFSv4: nfs_atomic_open() can race when looking up a non-regular file
NFSv4: Handle case where the lookup of a directory fails
NFSv42: Fallocate and clone should also request 'blocks used'
NFSv4: Allow writebacks to request 'blocks used'
SUNRPC: use default_groups in kobj_type
NFS: use default_groups in kobj_type
NFS: Fix the verifier for case sensitive filesystem in nfs_atomic_open()
NFS: Add a helper to remove case-insensitive aliases
...
|
|
It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|