| Age | Commit message (Collapse) | Author |
|---|
|
Some multigig SFPs from RollBall and Hilink do not expose functional
MDIO access to the internal PHY of the SFP via I2C address 0x56
(although there seems to be read-only clause 22 access on this address).
Instead these SFPs PHY can be accessed via I2C via the SFP Enhanced
Digital Diagnostic Interface - I2C address 0x51. The SFP_PAGE has to be
selected to 3 and the password must be filled with 0xff bytes for this
PHY communication to work.
This extends the mdio-i2c driver to support this protocol by adding a
special parameter to mdio_i2c_alloc function via which this RollBall
protocol can be selected.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of configuring the I2C mdiobus when SFP driver is probed,
create/destroy the mdiobus before the PHY is probed for/after it is
released.
This way we can tell the mdio-i2c code which protocol to use for each
SFP transceiver.
Move the code that determines MDIO I2C protocol from
sfp_sm_probe_for_phy() to sfp_sm_mod_probe(), where most of the SFP ID
parsing is done. Don't allocate I2C bus if no PHY is expected.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the supported PHY interface types to phylib if the PHY we are
connecting is inside a SFP, so that the PHY driver can select an
appropriate host configuration mode for their interface according to
the host capabilities.
For example the Marvell 88X3310 PHY inside RollBall SFP modules
defaults to 10gbase-r mode on host's side, and the marvell10g
driver currently does not change this setting. But a host may not
support 10gbase-r. For example Turris Omnia only supports sgmii,
1000base-x and 2500base-x modes. The PHY can be configured to use
those modes, but in order for the PHY driver to do that, it needs
to know which modes are supported.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We currently parse the SFP EEPROM to a bitmap of ethtool link modes,
and then attempt to convert the link modes to a PHY interface mode.
While this works at present, there are cases where this is sub-optimal.
For example, where a module can operate with several different PHY
interface modes.
To start addressing this, arrange for the SFP EEPROM parsing to also
provide a bitmap of the possible PHY interface modes.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.1
Few stack changes and lots of driver changes in this round. brcmfmac
has more activity as usual and it gets new hardware support. ath11k
improves WCN6750 support and also other smaller features. And of
course changes all over.
Note: in early September wireless tree was merged to wireless-next to
avoid some conflicts with mac80211 patches, this shouldn't cause any
problems but wanted to mention anyway.
Major changes:
mac80211
- refactoring and preparation for Wi-Fi 7 Multi-Link Operation (MLO)
feature continues
brcmfmac
- support CYW43439 SDIO chipset
- support BCM4378 on Apple platforms
- support CYW89459 PCIe chipset
rtw89
- more work to get rtw8852c supported
- P2P support
- support for enabling and disabling MSDU aggregation via nl80211
mt76
- tx status reporting improvements
ath11k
- cold boot calibration support on WCN6750
- Target Wake Time (TWT) debugfs support for STA interface
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- implement SRAM dump debugfs interface
- enable threaded NAPI on all hardware
- WoW support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
wcn36xx
- add SNR from a received frame as a source of system entropy
* tag 'wireless-next-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (231 commits)
wifi: rtl8xxxu: Improve rtl8xxxu_queue_select
wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM
wifi: rtl8xxxu: gen2: Enable 40 MHz channel width
wifi: rtw89: 8852b: configure DLE mem
wifi: rtw89: check DLE FIFO size with reserved size
wifi: rtw89: mac: correct register of report IMR
wifi: rtw89: pci: set power cut closed for 8852be
wifi: rtw89: pci: add to do PCI auto calibration
wifi: rtw89: 8852b: implement chip_ops::{enable,disable}_bb_rf
wifi: rtw89: add DMA busy checking bits to chip info
wifi: rtw89: mac: define DMA channel mask to avoid unsupported channels
wifi: rtw89: pci: mask out unsupported TX channels
iwlegacy: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
ipw2x00: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
wifi: iwlwifi: Track scan_cmd allocation size explicitly
brcmfmac: Remove the call to "dtim_assoc" IOVAR
brcmfmac: increase dcmd maximum buffer size
brcmfmac: Support 89459 pcie
brcmfmac: increase default max WOWL patterns to 16
cw1200: fix incorrect check to determine if no element is found in list
...
====================
Link: https://lore.kernel.org/r/20220930150413.A7984C433D6@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UMR MTTs used in striding RQ have certain alignment requirements. While
it's guaranteed to work when UMR pages are aligned to the UMR page size,
in practice it works then UMR pages are aligned to 8 bytes. However,
it's still not enough flexibility for the unaligned mode of XSK. This
patch leverages KSM to map UMR pages without alignment requirements,
when unaligned XSK is active. The downside is that KSM entries are twice
as big as MTTs, which limits the maximum WQE size, so regular RQs and
aligned XSK continue using MTTs.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This commit allows striding RQ to determine MTT page size at runtime,
instead of sticking to the compile-time PAGE_SIZE. This functionality
will be used by a following commit that adjusts the MTT page size to the
XSK frame size.
Stick with PAGE_SIZE for XSK on legacy RQ, as frag_stride is not used in
data path, it only helps calculate how pages are partitioned into
fragments, and PAGE_SIZE will ensure each fragment starts at the
beginning of a new allocation unit (XSK frame).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pskb_may_pull already contains all of the checks performed by
pskb_pull.
Use pskb_may_pull for validation in pskb_pull, eliminating the
duplication and making __pskb_pull obsolete.
Replace __pskb_pull with pskb_pull where applicable.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding optional new features to Qdisc offloads, existing drivers
must reject the new configuration until they are coded up to act on it.
Since modifying all drivers in lockstep with the changes in the Qdisc
can create problems of its own, it would be nice if there existed an
automatic opt-in mechanism for offloading optional features.
Jakub proposes that we multiplex one more kind of call through
ndo_setup_tc(): one where the driver populates a Qdisc-specific
capability structure.
First user will be taprio in further changes. Here we are introducing
the definitions for the base functionality.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220923163310.3192733-3-vladimir.oltean@nxp.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 3226b158e67c ("net: avoid 32 x truesize under-estimation
for tiny skbs") we are observing 10-20% regressions in performance
tests with small packets. The perf trace points to high pressure on
the slab allocator.
This change tries to improve the allocation schema for small packets
using an idea originally suggested by Eric: a new per CPU page frag is
introduced and used in __napi_alloc_skb to cope with small allocation
requests.
To ensure that the above does not lead to excessive truesize
underestimation, the frag size for small allocation is inflated to 1K
and all the above is restricted to build with 4K page size.
Note that we need to update accordingly the run-time check introduced
with commit fd9ea57f4e95 ("net: add napi_get_frags_check() helper").
Alex suggested a smart page refcount schema to reduce the number
of atomic operations and deal properly with pfmemalloc pages.
Under small packet UDP flood, I measure a 15% peak tput increases.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Suggested-by: Alexander H Duyck <alexanderduyck@fb.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/6b6f65957c59f86a353fc09a5127e83a32ab5999.1664350652.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
|
|
Add the capability that will allow the driver to determine the minimal
MTT page size to be able to map the smallest possible pages in XSK. The
older firmwares that don't have this capability default to 12 (i.e.
4096-byte pages).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
updates from mlx5-next 2022-09-24
Updates form mlx5-next including[1]:
1) HW definitions and support for NPPS clock settings.
2) various cleanups
3) Enable hash mode by default for all NICs
4) page tracker and advanced virtualization HW definitions for vfio
[1] https://lore.kernel.org/netdev/20220907233636.388475-1-saeed@kernel.org/
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Remove from FPGA IFC file not-needed definitions
net/mlx5: Remove unused structs
net/mlx5: Remove unused functions
net/mlx5: detect and enable bypass port select flow table
net/mlx5: Lag, enable hash mode by default for all NICs
net/mlx5: Lag, set active ports if support bypass port select flow table
RDMA/mlx5: Don't set tx affinity when lag is in hash mode
net/mlx5: add IFC bits for bypassing port select flow table
net/mlx5: Add support for NPPS with real time mode
net/mlx5: Expose NPPS related registers
net/mlx5: Query ADV_VIRTUALIZATION capabilities
net/mlx5: Introduce ifc bits for page tracker
RDMA/mlx5: Move function mlx5_core_query_ib_ppcnt() to mlx5_ib
====================
Link: https://lore.kernel.org/all/20220927201906.234015-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We tell driver developers to always pass NAPI_POLL_WEIGHT
as the weight to netif_napi_add(). This may be confusing
to newcomers, drop the weight argument, those who really
need to tweak the weight can use netif_napi_add_weight().
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN
Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can benefit from a smaller struct ubuf_info, so leave only mandatory
fields and let users to decide how they want to extend it. Convert
MSG_ZEROCOPY to struct ubuf_info_msgzc and remove duplicated fields.
This reduces the size from 48 bytes to just 16.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're going to split struct ubuf_info and leave there only
mandatory fields. Users are free to extend it. Add struct
ubuf_info_msgzc, which will be an extended version for MSG_ZEROCOPY and
some other users. It duplicates of struct ubuf_info for now and will be
removed in a couple of patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit 1d0403d20f6c281cb3d14c5f1db5317caeec48e9.
Anatoly Pugachev reported that the commit 1d0403d20f6c ("net: set proper
memcg for net_init hooks allocations") is somehow causing the sparc64
VMs failed to boot and the VMs boot fine with that patch reverted. So,
revert the patch for now and later we can debug the issue.
Link: https://lore.kernel.org/all/20220918092849.GA10314@u164.east.ru/
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: Vasily Averin <vvs@openvz.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: cgroups@vger.kernel.org
Cc: sparclinux@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Fixes: 1d0403d20f6c ("net: set proper memcg for net_init hooks allocations")
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
|
|
Move IP layout bits definitions to be close to the place that actually
uses it, together with removal extra defines that not in-use.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove structs which are no longer used in the driver:
mlx5dr_cmd_qp_create_attr
mlx5_fs_dr_ns
mlx5_pas
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Remove functions which are no longer used in the driver:
mlx5e_ipsec_is_tx_flow
mlx5_health_flush
get_cqe_enhanced_num_mini_cqes
get_cqe_l3_hdr_type
mlx5_health_flush
mlx5_fs_is_ipsec_flow
_mlx5_fs_is_outer_ipproto_flow
mlx5_fs_is_outer_tcp_flow
mlx5_fs_is_outer_udp_flow
mlx5_fs_is_vxlan_flow
mlx5_fs_is_outer_ipsec_flow
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In hash mode, without setting tx affinity explicitly, the port select
flow table decides which port is used for the traffic.
If port_select_flow_table_bypass capability is supported and tx affinity
is set explicitly for QP/TIS, they will be added into the explicit affinity
table in FW to check which port is used for the traffic.
1. The overloaded explicit affinity table may affect performance.
To avoid this, do not set tx affinity explicitly by default.
2. The packets of the same flow need to be transmitted on the same port.
Because the packets of the same flow use different QPs in slow & fast
path, it shouldn't set tx affinity explicitly for these QPs.
Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
port_select_flow_table_bypass - When set, device supports
bypass port select flow table.
active_port - Bitmask indicates the current active ports
in PORT_SELECT_FT LAG.
MLX5_SET_HCA_CAP_OP_MODE_PORT_SELECTION - op_mod to operate
PORT_SELECTION_Capabilities.
Signed-off-by: Liu, Changcheng <jerrliu@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for setting NPPS. NPPS is currently available in
REAL_TIME_CLOCK mode only. In addition allow the user to set the pulse
duration.
When NPPS pulse duration is not set explicitly by the user, driver set
it to 50% of the NPPS period.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add management capability bits indicating firmware may support N pulses
per second. Add corresponding fields in MTPPS register.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Eran Ben Elisha <eranbe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Merge net/mlx5 dependencies for device DMA logging.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull last (?) hotfixes from Andrew Morton:
"26 hotfixes.
8 are for issues which were introduced during this -rc cycle, 18 are
for earlier issues, and are cc:stable"
* tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
x86/uaccess: avoid check_object_size() in copy_from_user_nmi()
mm/page_isolation: fix isolate_single_pageblock() isolation behavior
mm,hwpoison: check mm when killing accessing process
mm/hugetlb: correct demote page offset logic
mm: prevent page_frag_alloc() from corrupting the memory
mm: bring back update_mmu_cache() to finish_fault()
frontswap: don't call ->init if no ops are registered
mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()
mm: fix madivse_pageout mishandling on non-LRU page
powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
mm: gup: fix the fast GUP race against THP collapse
mm: fix dereferencing possible ERR_PTR
vmscan: check folio_test_private(), not folio_get_private()
mm: fix VM_BUG_ON in __delete_from_swap_cache()
tools: fix compilation after gfp_types.h split
mm/damon/dbgfs: fix memory leak when using debugfs_lookup()
mm/migrate_device.c: copy pte dirty bit to page
mm/migrate_device.c: add missing flush_cache_page()
mm/migrate_device.c: flush TLB while holding PTL
x86/mm: disable instrumentations of mm/pgprot.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small, and late, serial driver fixes for 6.0-rc7 to
resolve some reported problems.
Included in here are:
- tegra icount accounting fixes, including a framework function that
other drivers will be converted over to using in 6.1-rc1.
- fsl_lpuart reset bugfix
- 8250 omap 485 bugfix
- sifive serial clock bugfix
The last three patches have not shown up in linux-next due to them
being added to my tree only 2 days ago, but they are tiny and
self-contained and the developers say they resolve issues that they
have with 6.0-rc. The other three have been in linux-next for a while
with no reported issues"
* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: enable clocks for UART when probed
serial: 8250: omap: Use serial8250_em485_supported
serial: fsl_lpuart: Reset prior to registration
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: Create uart_xmit_advance()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two tiny driver core fixes for 6.0-rc7 that resolve some
oft-reported problems.
The first is a revert of the "fw_devlink.strict=1" default option that
we keep trying to enable, but we keep finding platforms that this just
breaks everything on. So again, we need it reverted and hopefully it
can be worked on in future releases.
The second is a sysfs file-size bugfix that resolves an issue that
many people are starting to hit as the fix it is fixing also was
backported to stable kernels. The util-linux developers are starting
to get bugreports about sysfs files that contain no data because of
this problem, and this fix which has been in linux-next in the
bitfield tree for a long time, resolves it. I'm submitting it here as
it needs to be merged for 6.0-final, not for 6.1-rc1.
Both of these have been in linux-next with no reported issues, only
reports were that these fixed problems"
* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
Revert "driver core: Set fw_devlink.strict=1 by default"
|
|
This adds support for adjusting the advertisement for pause-based rate
matching. This may result in a lossy link, since the final link settings
are not adjusted. Asymmetric pause support is necessary. It would be
possible for a MAC supporting only symmetric pause to use pause-based rate
adaptation, but only if pause reception was enabled as well.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the phy is configured to use pause-based rate matching, ensure that
the link is full duplex with pause frame reception enabled. As
suggested, if pause-based rate matching is enabled by the phy, then
pause reception is unconditionally enabled.
The interface duplex is determined based on the rate matching type.
When rate matching is enabled, so is the speed. We assume the maximum
interface speed is used. This is only relevant for MLO_AN_PHY. For
MLO_AN_INBAND, the MAC/PCS's view of the interface speed will be used.
Although there are no RATE_ADAPT_CRS phys in-tree, it has been added for
comparison (and the implementation is quite simple).
Co-developed-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds support for rate matching (also known as rate adaptation) to
the phy subsystem. The general idea is that the phy interface runs at
one speed, and the MAC throttles the rate at which it sends packets to
the link speed. There's a good overview of several techniques for
achieving this at [1]. This patch adds support for three: pause-frame
based (such as in Aquantia phys), CRS-based (such as in 10PASS-TS and
2BASE-TL), and open-loop-based (such as in 10GBASE-W).
This patch makes a few assumptions and a few non assumptions about the
types of rate matching available. First, it assumes that different phys
may use different forms of rate matching. Second, it assumes that phys
can use rate matching for any of their supported link speeds (e.g. if a
phy supports 10BASE-T and XGMII, then it can adapt XGMII to 10BASE-T).
Third, it does not assume that all interface modes will use the same
form of rate matching. Fourth, it does not assume that all phy devices
will support rate matching (even if some do). Relaxing or strengthening
these (non-)assumptions could result in a different API. For example, if
all interface modes were assumed to use the same form of rate matching,
then a bitmask of interface modes supportting rate matching would
suffice.
For some better visibility into the process, the current rate matching
mode is exposed as part of the ethtool ksettings. For the moment, only
read access is supported. I'm not sure what userspace might want to
configure yet (disable it altogether, disable just one mode, specify the
mode to use, etc.). For the moment, since only pause-based rate
adaptation support is added in the next few commits, rate matching can
be disabled altogether by adjusting the advertisement.
802.3 calls this feature "rate adaptation" in clause 49 (10GBASE-R) and
"rate matching" in clause 61 (10PASS-TL and 2BASE-TS). Aquantia also calls
this feature "rate adaptation". I chose "rate matching" because it is
shorter, and because Russell doesn't think "adaptation" is correct in this
context.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we call phylink_caps_to_linkmodes directly from
phylink_get_linkmodes, it is difficult to re-use this functionality in
MAC drivers. This is because MAC drivers must then work with an ethtool
linkmode bitmap, instead of with mac capabilities. Instead, let the
caller of phylink_get_linkmodes do the conversion. To reflect this
change, rename the function to phylink_get_capabilities.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This function is convenient for MAC drivers. They can use it to add or
remove particular link modes based on capabilities (such as if half
duplex is not supported for a particular interface mode).
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This documents the possible MLO_PAUSE_* settings which can result from
different combinations of MAC_(A)SYM_PAUSE. Special note is paid to
settings which can result from user configuration (MLO_PAUSE_AN). The
autonegotiation results are more-or-less a direct consequence of IEEE
802.3 Table 28B-2.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MACsec EPN splits the packet number (PN) into two 32-bits fields,
epn_lsb (32 least significant bits (LSBs) of PN) and epn_msb (32
most significant bits (MSBs) of PN).
Epn_msb bits are managed by SW and for that HW is required to send
an object change event of type EPN event notifying the SW to update
the epn_msb in addition, once epn_msb is updated SW update HW with
the new epn_msb value for HW to perform replay protection.
To prevent HW from stopping while handling the event, SW manages
another bit for HW called epn_overlap, HW uses the latter to get
an indication regarding how to read the epn_msb value correctly
while still receiving packets.
Add epn event handling that updates the epn_overlap and epn_msb for
every 2^31 packets according to the following logic:
if epn_lsb crosses 2^31 (half sequence number wraparound) upon HW
relevant event, SW updates the esn_overlap value to OLD (value = 1).
When the epn_lsb crosses 2^32 (full sequence number wraparound)
upon HW relevant event, SW updates the esn_overlap to NEW
(value = 0) and increment the esn_msb.
When using MACsec EPN a salt and short secure channel id (ssci)
needs to be provided by the user, when offloading EPN need to pass
this salt and ssci to the HW to be used in the initial vector (IV)
calculations.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
protection
Add ifc bits related to advanced steering operations (ASO) and general
object modify for macsec to use as part of offloading EPN and replay
protection features.
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix ifc fields name to be consistent with the device spec document.
Fixes: 8385c51ff5bc ("net/mlx5: Introduce MACsec Connect-X offload hardware bits and structures")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/freescale/fec.h
7b15515fc1ca ("Revert "fec: Restart PPS after link state change"")
40c79ce13b03 ("net: fec: add stop mode support for imx8 platform")
https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/
drivers/pinctrl/pinctrl-ocelot.c
c297561bc98a ("pinctrl: ocelot: Fix interrupt controller")
181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration")
https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/
tools/testing/selftests/drivers/net/bonding/Makefile
bbb774d921e2 ("net: Add tests for bonding and team address list management")
152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target")
https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/
drivers/net/can/usb/gs_usb.c
5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition")
45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support")
https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple of
build issues, and board specific DT corrections on TQMa8MPQL,
imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
partially broken functionality
- Several fixes for Rockchip SoCs, addressing a USB issue on
BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
cards, among other minor issues
- A fix for a long-running naming mistake that prevented the moxart
mmc driver from working at all
- Multiple Arm SCMI firmware fixes for hardening some corner cases"
* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
...
|
|
Other than pcie bus, introduce support for axi bus to mtk wed driver.
Axi bus is used to connect mt7986-wmac soc chip available on mt7986
device.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce Wireless Etherne Dispatcher support on transmission side
for mt7986 chipset
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As PAGE_SIZE is unsigned long, -1 > PAGE_SIZE when NR_CPUS <= 3.
This leads to very large file sizes:
topology$ ls -l
total 0
-r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 core_cpus
-r--r--r-- 1 root root 4096 Sep 5 11:59 core_cpus_list
-r--r--r-- 1 root root 4096 Sep 5 10:58 core_id
-r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 core_siblings
-r--r--r-- 1 root root 4096 Sep 5 11:59 core_siblings_list
-r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 die_cpus
-r--r--r-- 1 root root 4096 Sep 5 11:59 die_cpus_list
-r--r--r-- 1 root root 4096 Sep 5 11:59 die_id
-r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 package_cpus
-r--r--r-- 1 root root 4096 Sep 5 11:59 package_cpus_list
-r--r--r-- 1 root root 4096 Sep 5 10:58 physical_package_id
-r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 thread_siblings
-r--r--r-- 1 root root 4096 Sep 5 11:59 thread_siblings_list
Adjust the inequality to catch the case when NR_CPUS is configured
to a small value.
Fixes: 7ee951acd31a ("drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: stable@vger.kernel.org
Cc: feng xiangjun <fengxj325@gmail.com>
Reported-by: feng xiangjun <fengxj325@gmail.com>
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20220906203542.1796629-1-pauld@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 9cd4f1434479f1ac25c440c421fbf52069079914.
Some issues were reported on the original commit. Some thunderbolt devices
don't work anymore due to the following DMA fault.
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [09:00.0] fault index 0x8080
[fault reason 0x25]
Blocked a compatibility format interrupt request
Bring it back for now to avoid functional regression.
Fixes: 9cd4f1434479f ("iommu/vt-d: Fix possible recursive locking in intel_iommu_init()")
Link: https://lore.kernel.org/linux-iommu/485A6EA5-6D58-42EA-B298-8571E97422DE@getmailspring.com/
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216497
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: <stable@vger.kernel.org> # 5.19.x
Reported-and-tested-by: George Hilliard <thirtythreeforty@gmail.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20220920081701.3453504-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Remove a left-over from commit 2874c5fd2842 ("treewide: Replace GPLv2
boilerplate/reference with SPDX - rule 152")
There is no need for an empty "License:".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0e5ff727626b748238f4b78932f81572143d8f0b.1662896317.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new APIs in firmware to configure SD/GEM registers. Internally
it calls PM IOCTL for below SD/GEM register configuration:
- SD/EMMC select
- SD slot type
- SD base clock
- SD 8 bit support
- SD fixed config
- GEM SGMII Mode
- GEM fixed config
Signed-off-by: Ronak Jain <ronak.jain@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some network drivers use __dev_mc_sync()/__dev_uc_sync() and therefore
program the hardware only with addresses with a non-zero sync_cnt.
Some of the above drivers also need to save/restore the address
filtering lists when certain events happen, and they need to walk
through the struct net_device :: uc and struct net_device :: mc lists.
But these lists contain unsynced addresses too.
To keep the appearance of an elementary form of data encapsulation,
provide iterators through these lists that only look at entries with a
non-zero sync_cnt, instead of filtering entries out from device drivers.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Lee Jones says:
====================
Immutable branch between MFD, Net and Pinctrl due for the v6.0 merge window
* tag 'ib-mfd-net-pinctrl-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: ocelot: Add support for the vsc7512 chip via spi
dt-bindings: mfd: ocelot: Add bindings for VSC7512
resource: add define macro for register address resources
pinctrl: microchip-sgpio: add ability to be used in a non-mmio configuration
pinctrl: microchip-sgpio: allow sgpio driver to be used as a module
pinctrl: ocelot: add ability to be used in a non-mmio configuration
net: mdio: mscc-miim: add ability to be used in a non-mmio configuration
mfd: ocelot: Add helper to get regmap from a resource
====================
Link: https://lore.kernel.org/r/YxrjyHcceLOFlT/c@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Apple platforms, the One Time Programmable ROM in the Broadcom chips
contains information about the specific board design (module, vendor,
version) that is required to select the correct NVRAM file. Parse this
OTP ROM and extract the required strings.
Note that the user OTP offset/size is per-chip. This patch does not add
any chips yet.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/E1oZDni-0077aM-I6@rmk-PC.armlinux.org.uk
|
