| Age | Commit message (Collapse) | Author |
|---|
|
The macros CONFIG_DEBUG_MAPLE_TREE_VERBOSE no one uses, functions
mas_dup_tree() and mas_dup_store() are not implemented, just function
declaration, so drop it.
Link: https://lkml.kernel.org/r/20221221060058.609003-6-vernon2gm@gmail.com
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Clean up and refinement for maple tree", v2.
This patchset cleans up and refines some maple tree code. A few small
changes make the code easier to understand and for better readability.
This patch (of 7):
These extra space and blank lines are unnecessary, so drop them.
Link: https://lkml.kernel.org/r/20221221060058.609003-1-vernon2gm@gmail.com
Link: https://lkml.kernel.org/r/20221221060058.609003-2-vernon2gm@gmail.com
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As Hardware Tag-Based KASAN is intended to be used in production, its
performance impact is crucial. As page_alloc allocations tend to be big,
tagging and checking all such allocations can introduce a significant
slowdown.
Add two new boot parameters that allow to alleviate that slowdown:
- kasan.page_alloc.sample, which makes Hardware Tag-Based KASAN tag only
every Nth page_alloc allocation with the order configured by the second
added parameter (default: tag every such allocation).
- kasan.page_alloc.sample.order, which makes sampling enabled by the first
parameter only affect page_alloc allocations with the order equal or
greater than the specified value (default: 3, see below).
The exact performance improvement caused by using the new parameters
depends on their values and the applied workload.
The chosen default value for kasan.page_alloc.sample.order is 3, which
matches both PAGE_ALLOC_COSTLY_ORDER and SKB_FRAG_PAGE_ORDER. This is
done for two reasons:
1. PAGE_ALLOC_COSTLY_ORDER is "the order at which allocations are deemed
costly to service", which corresponds to the idea that only large and
thus costly allocations are supposed to sampled.
2. One of the workloads targeted by this patch is a benchmark that sends
a large amount of data over a local loopback connection. Most multi-page
data allocations in the networking subsystem have the order of
SKB_FRAG_PAGE_ORDER (or PAGE_ALLOC_COSTLY_ORDER).
When running a local loopback test on a testing MTE-enabled device in sync
mode, enabling Hardware Tag-Based KASAN introduces a ~50% slowdown.
Applying this patch and setting kasan.page_alloc.sampling to a value
higher than 1 allows to lower the slowdown. The performance improvement
saturates around the sampling interval value of 10 with the default
sampling page order of 3. This lowers the slowdown to ~20%. The slowdown
in real scenarios involving the network will likely be better.
Enabling page_alloc sampling has a downside: KASAN misses bad accesses to
a page_alloc allocation that has not been tagged. This lowers the value
of KASAN as a security mitigation.
However, based on measuring the number of page_alloc allocations of
different orders during boot in a test build, sampling with the default
kasan.page_alloc.sample.order value affects only ~7% of allocations. The
rest ~93% of allocations are still checked deterministically.
Link: https://lkml.kernel.org/r/129da0614123bb85ed4dd61ae30842b2dd7c903f.1671471846.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mark Brand <markbrand@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "implement DAMOS filtering for anon pages and/or specific
memory cgroups"
DAMOS let users do system operations in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
This patchset adds the support for all DAMOS actions that 'paddr'
monitoring operations set supports ('pageout', 'lru_prio', and
'lru_deprio'), and the functionality is exposed via DAMON kernel API
(damon.h) the DAMON sysfs interface (/sys/kernel/mm/damon/admins/), and
DAMON_RECLAIM module parameters.
Patches Sequence
----------------
First patch implements DAMOS filter interface to DAMON kernel API. Second
patch makes the physical address space monitoring operations set to
support the filters from all supporting DAMOS actions. Third patch adds
anonymous pages filter support to DAMON_RECLAIM, and the fourth patch
documents the DAMON_RECLAIM's new feature. Fifth to seventh patches
implement DAMON sysfs files for support of the filters, and eighth patch
connects the file to use DAMOS filters feature. Ninth patch adds simple
self test cases for DAMOS filters of the sysfs interface. Finally,
following two patches (tenth and eleventh) document the new features and
interfaces.
This patch (of 11):
DAMOS lets users do system operation in a data access pattern oriented
way. The data access pattern, which is extracted by DAMON, is somewhat
accurate more than what user space could know in many cases. However, in
some situation, users could know something more than the kernel about the
pattern or some special requirements for some types of memory or
processes. For example, some users would have slow swap devices and knows
latency-ciritical processes and therefore want to use DAMON-based
proactive reclamation (DAMON_RECLAIM) for only non-anonymous pages of
non-latency-critical processes.
For such restriction, users could exclude the memory regions from the
initial monitoring regions and use non-dynamic monitoring regions update
monitoring operations set including fvaddr and paddr. They could also
adjust the DAMOS target access pattern. For dynamically changing memory
layout and access pattern, those would be not enough.
To help the case, add an interface, namely DAMOS filters, which can be
used to avoid the DAMOS actions be applied to specific types of memory, to
DAMON kernel API (damon.h). At the moment, it supports filtering
anonymous pages and/or specific memory cgroups in or out for each DAMOS
scheme.
Note that this commit adds only the interface to the DAMON kernel API.
The impelmentation should be made in the monitoring operations sets, and
following commits will add that.
Link: https://lkml.kernel.org/r/20221205230830.144349-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20221205230830.144349-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mark_page_lazyfree() and the callers are converted to use folio, this
rename and make it to take in a folio argument instead of calling
page_folio().
Link: https://lkml.kernel.org/r/20221209020618.190306-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Start converting buffer_heads to use folios".
I was hoping that filesystems would convert from buffer_heads to iomap,
but that's not happening particularly quickly. So the buffer_head
infrastructure needs to be converted from being page-based to being
folio-based.
This patch (of 12):
Buffer heads point to the allocation (ie the folio), not the page. This
is currently the same thing for all filesystems that use buffer heads, so
this is a safe transitional step.
Link: https://lkml.kernel.org/r/20221215214402.3522366-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20221215214402.3522366-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
huge_pte_offset() is the main walker function for hugetlb pgtables. The
name is not really representing what it does, though.
Instead of renaming it, introduce a wrapper function called hugetlb_walk()
which will use huge_pte_offset() inside. Assert on the locks when walking
the pgtable.
Note, the vma lock assertion will be a no-op for private mappings.
Document the last special case in the page_vma_mapped_walk() path where we
don't need any more lock to call hugetlb_walk().
Taking vma lock there is not needed because either: (1) potential callers
of hugetlb pvmw holds i_mmap_rwsem already (from one rmap_walk()), or (2)
the caller will not walk a hugetlb vma at all so the hugetlb code path not
reachable (e.g. in ksm or uprobe paths).
It's slightly implicit for future page_vma_mapped_walk() callers on that
lock requirement. But anyway, when one day this rule breaks, one will get
a straightforward warning in hugetlb_walk() with lockdep, then there'll be
a way out.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20221216155229.2043750-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since walk_hugetlb_range() walks the pgtable, it needs the vma lock to
make sure the pgtable page will not be freed concurrently.
Link: https://lkml.kernel.org/r/20221216155226.2043738-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In hugetlb_fault(), there used to have a special path to handle swap entry
at the entrance using huge_pte_offset(). That's unsafe because
huge_pte_offset() for a pmd sharable range can access freed pgtables if
without any lock to protect the pgtable from being freed after pmd
unshare.
Here the simplest solution to make it safe is to move the swap handling to
be after the vma lock being held. We may need to take the fault mutex on
either migration or hwpoison entries now (also the vma lock, but that's
really needed), however neither of them is hot path.
Note that the vma lock cannot be released in hugetlb_fault() when the
migration entry is detected, because in migration_entry_wait_huge() the
pgtable page will be used again (by taking the pgtable lock), so that also
need to be protected by the vma lock. Modify migration_entry_wait_huge()
so that it must be called with vma read lock held, and properly release
the lock in __migration_entry_wait_huge().
Link: https://lkml.kernel.org/r/20221216155100.2043537-5-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
huge_pte_offset() is potentially a pgtable walker, looking up pte_t* for a
hugetlb address.
Normally, it's always safe to walk a generic pgtable as long as we're with
the mmap lock held for either read or write, because that guarantees the
pgtable pages will always be valid during the process.
But it's not true for hugetlbfs, especially shared: hugetlbfs can have its
pgtable freed by pmd unsharing, it means that even with mmap lock held for
current mm, the PMD pgtable page can still go away from under us if pmd
unsharing is possible during the walk.
So we have two ways to make it safe even for a shared mapping:
(1) If we're with the hugetlb vma lock held for either read/write, it's
okay because pmd unshare cannot happen at all.
(2) If we're with the i_mmap_rwsem lock held for either read/write, it's
okay because even if pmd unshare can happen, the pgtable page cannot
be freed from under us.
Document it.
Link: https://lkml.kernel.org/r/20221216155100.2043537-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to set
executable bit at creation time (memfd_create).
When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
(mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to be
executable (mode: 0777) after creation.
when MFD_EXEC flag is set, memfd is created with executable bit
(mode:0777), this is the same as the old behavior of memfd_create.
The new pid namespaced sysctl vm.memfd_noexec has 3 values:
0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_EXEC was set.
1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_NOEXEC_SEAL was set.
2: memfd_create() without MFD_NOEXEC_SEAL will be rejected.
The sysctl allows finer control of memfd_create for old-software that
doesn't set the executable bit, for example, a container with
vm.memfd_noexec=1 means the old-software will create non-executable memfd
by default. Also, the value of memfd_noexec is passed to child namespace
at creation time. For example, if the init namespace has
vm.memfd_noexec=2, all its children namespaces will be created with 2.
[akpm@linux-foundation.org: add stub functions to fix build]
[akpm@linux-foundation.org: remove unneeded register_pid_ns_ctl_table_vm() stub, per Jeff]
[akpm@linux-foundation.org: s/pr_warn_ratelimited/pr_warn_once/, per review]
[akpm@linux-foundation.org: fix CONFIG_SYSCTL=n warning]
Link: https://lkml.kernel.org/r/20221215001205.51969-4-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@google.com>
Co-developed-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
folio_set_compound_order() is moved to an mm-internal location so external
folio users cannot misuse this function. Change the name of the function
to folio_set_order() and use WARN_ON_ONCE() rather than BUG_ON. Also,
handle the case if a non-large folio is passed and add clarifying comments
to the function.
Link: https://lore.kernel.org/lkml/20221207223731.32784-1-sidhartha.kumar@oracle.com/T/
Link: https://lkml.kernel.org/r/20221215061757.223440-1-sidhartha.kumar@oracle.com
Fixes: 9fd330582b2f ("mm: add folio dtor and order setter functions")
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Merge branch 'master' into mm-hotfixes-stable
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- avoid a potential crash on the efi_subsys_init() error path
- use more appropriate error code for runtime services calls issued
after a crash in the firmware occurred
- avoid READ_ONCE() for accessing firmware tables that may appear
misaligned in memory
* tag 'efi-fixes-for-v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: tpm: Avoid READ_ONCE() for accessing the event log
efi: rt-wrapper: Add missing include
efi: fix userspace infinite retry read efivars after EFI runtime services page fault
efi: fix NULL-deref in init error path
|
|
Nathan reports that recent kernels built with LTO will crash when doing
EFI boot using Fedora's GRUB and SHIM. The culprit turns out to be a
misaligned load from the TPM event log, which is annotated with
READ_ONCE(), and under LTO, this gets translated into a LDAR instruction
which does not tolerate misaligned accesses.
Interestingly, this does not happen when booting the same kernel
straight from the UEFI shell, and so the fact that the event log may
appear misaligned in memory may be caused by a bug in GRUB or SHIM.
However, using READ_ONCE() to access firmware tables is slightly unusual
in any case, and here, we only need to ensure that 'event' is not
dereferenced again after it gets unmapped, but this is already taken
care of by the implicit barrier() semantics of the early_memunmap()
call.
Cc: <stable@vger.kernel.org>
Cc: Peter Jones <pjones@redhat.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1782
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"A set of assorted fixes and hardware-id additions"
* tag 'platform-drivers-x86-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode
platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode
platform/x86/amd: Fix refcount leak in amd_pmc_probe
platform/x86: intel/pmc/core: Add Meteor Lake mobile support
platform/x86: simatic-ipc: add another model
platform/x86: simatic-ipc: correct name of a model
platform/x86: dell-privacy: Only register SW_CAMERA_LENS_COVER if present
platform/x86: dell-privacy: Fix SW_CAMERA_LENS_COVER reporting
platform/x86: asus-wmi: Don't load fan curves without fan
platform/x86: asus-wmi: Ignore fan on E410MA
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
platform/surface: aggregator: Ignore command messages not intended for us
platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
platform/x86: ideapad-laptop: Add Legion 5 15ARH05 DMI id to set_fn_lock_led_list[]
platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here's a sizeable batch of Friday the 13th arm64 fixes for -rc4. What
could possibly go wrong?
The obvious reason we have so much here is because of the holiday
season right after the merge window, but we've also brought back an
erratum workaround that was previously dropped at the last minute and
there's an MTE coredumping fix that strays outside of the arch/arm64
directory.
Summary:
- Fix PAGE_TABLE_CHECK failures on hugepage splitting path
- Fix PSCI encoding of MEM_PROTECT_RANGE function in UAPI header
- Fix NULL deref when accessing debugfs node if PSCI is not present
- Fix MTE core dumping when VMA list is being updated concurrently
- Fix SME signal frame handling when SVE is not implemented by the
CPU
- Fix asm constraints for cmpxchg_double() to hazard both words
- Fix build failure with stack tracer and older versions of Clang
- Bring back workaround for Cortex-A715 erratum 2645198"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix build with CC=clang, CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y
arm64/mm: Define dummy pud_user_exec() when using 2-level page-table
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
firmware/psci: Don't register with debugfs if PSCI isn't available
firmware/psci: Fix MEM_PROTECT_RANGE function numbers
arm64/signal: Always allocate SVE signal frames on SME only systems
arm64/signal: Always accept SVE signal frames on SME only systems
arm64/sme: Fix context switch for SME only systems
arm64: cmpxchg_double*: hazard against entire exchange variable
arm64/uprobes: change the uprobe_opcode_t typedef to fix the sparse warning
arm64: mte: Avoid the racy walk of the vma list during core dump
elfcore: Add a cprm parameter to elf_core_extra_{phdrs,data_size}
arm64: mte: Fix double-freeing of the temporary tag storage during coredump
arm64: ptrace: Use ARM64_SME to guard the SME register enumerations
arm64/mm: add pud_user_exec() check in pud_user_accessible_page()
arm64/mm: fix incorrect file_map_count for invalid pmd
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
|
|
Add IPC PX-39A support.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-3-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
What we called IPC427G should be renamed to BX-39A to be more in line
with the actual product name.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fixes from Miquel Raynal:
- cfi: Allow building spi-intel standalone to avoid build issues
- parsers: scpart: Fix __udivdi3 undefined on mips
- parsers: tplink_safeloader: Fix potential memory leak during parsing
- Update email of Tudor Ambarus
* tag 'mtd/fixes-for-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
MAINTAINERS: Update email of Tudor Ambarus
mtd: cfi: allow building spi-intel standalone
mtd: parsers: scpart: fix __udivdi3 undefined on mips
mtd: parsers: Fix potential memory leak in mtd_parser_tplink_safeloader_parse()
|
|
The rename from mm->mmap_sem to mm->mmap_lock was performed in commit
da1c55f1b272 ("mmap locking API: rename mmap_sem to mmap_lock") and commit
c1e8d7c6a7a6 ("map locking API: convert mmap_sem comments"), however some
incorrect comments remain.
This patch simply corrects those comments which are obviously incorrect
within mm itself.
Link: https://lkml.kernel.org/r/33fba04389ab63fc4980e7ba5442f521df6dc657.1673048927.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 449c796768c9 ("mm: teach release_pages() to take an array of
encoded page pointers too") added the kernel doc comment for
release_pages() on top of 'union release_pages_arg', so making 'make
htmldocs' complains as below:
./include/linux/mm.h:1268: warning: cannot understand function prototype: 'typedef union '
The kernel doc comment for the function is already on top of the
function's definition in mm/swap.c, and the new comment is actually not
for the function but indeed release_pages_arg. Fixing the comment to
reflect the intent would be one option. But, kernel doc cannot parse
the union as below due to the attribute.
./include/linux/mm.h:1272: error: Cannot parse struct or union!
Modify the comment to reflect the intent but do not mark it as a kernel
doc comment.
Link: https://lkml.kernel.org/r/20230106203331.127532-1-sj@kernel.org
Fixes: 449c796768c9 ("mm: teach release_pages() to take an array of encoded page pointers too")
Signed-off-by: SeongJae Park <sj@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
free_anon_vma_name() is missing a check for anonymous shmem VMA which
leads to a memory leak due to refcount not being dropped. Fix this by
calling anon_vma_name_put() unconditionally. It will free vma->anon_name
whenever it's non-NULL.
Link: https://lkml.kernel.org/r/20230105000241.1450843-1-surenb@google.com
Fixes: d09e8ca6cb93 ("mm: anonymous shared memory naming")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reported-by: syzbot+91edf9178386a07d06a7@syzkaller.appspotmail.com
Cc: Hugh Dickins <hughd@google.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
|
|
Pull block fixes from Jens Axboe:
"The big change here is obviously the revert of the pktcdvd driver
removal. Outside of that, just minor tweaks. In detail:
- Re-instate the pktcdvd driver, which necessitates adding back
bio_copy_data_iter() and the fops->devnode() hook for now (me)
- Fix for splitting of a bio marked as NOWAIT, causing either nowait
reads or writes to error with EAGAIN even if parts of the IO
completed (me)
- Fix for ublk, punting management commands to io-wq as they can all
easily block for extended periods of time (Ming)
- Removal of SRCU dependency for the block layer (Paul)"
* tag 'block-2023-01-06' of git://git.kernel.dk/linux:
block: Remove "select SRCU"
Revert "pktcdvd: remove driver."
Revert "block: remove devnode callback from struct block_device_operations"
Revert "block: bio_copy_data_iter"
ublk: honor IO_URING_F_NONBLOCK for handling control command
block: don't allow splitting of a REQ_NOWAIT bio
block: handle bio_split_to_limits() NULL return
|
|
Pull io_uring fixes from Jens Axboe:
"A few minor fixes that should go into the 6.2 release:
- Fix for a memory leak in io-wq worker creation, if we ultimately
end up canceling the worker creation before it gets created (me)
- lockdep annotations for the CQ locking (Pavel)
- A regression fix for CQ timeout handling (Pavel)
- Ring pinning around deferred task_work fix (Pavel)
- A trivial member move in struct io_ring_ctx, saving us some memory
(me)"
* tag 'io_uring-2023-01-06' of git://git.kernel.dk/linux:
io_uring: fix CQ waiting timeout handling
io_uring: move 'poll_multi_queue' bool in io_ring_ctx
io_uring: lockdep annotate CQ locking
io_uring: pin context while queueing deferred tw
io_uring/io-wq: free worker if task_work creation is canceled
|
|
Pull ceph fixes from Ilya Dryomov:
"Two file locking fixes from Xiubo"
* tag 'ceph-for-6.2-rc3' of https://github.com/ceph/ceph-client:
ceph: avoid use-after-free in ceph_fl_release_lock()
ceph: switch to vfs_inode_has_locks() to fix file lock bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
|
|
A subsequent fix for arm64 will use this parameter to parse the vma
information from the snapshot created by dump_vma_snapshot() rather than
traversing the vma list without the mmap_lock.
Fixes: 6dd8b1a0b6cb ("arm64: mte: Dump the MTE tags in the core file")
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Suggested-by: Seth Jenkins <sethjenkins@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221222181251.1345752-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This reverts commit f40eb99897af665f11858dd7b56edcb62c3f3c67.
There are apparently still users out there of this driver. While we'd
love to remove it to ease the maintenance burden, let's reinstate it
for now until better (userspace) solutions can be developed.
Link: https://lore.kernel.org/lkml/20230104190115.ceglfefco475ev6c@pali/
Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 85d6ce58e493ac8b7122e2fbe3f41b94d6ebdc11.
We're reinstating the pktcdvd driver, which needs this API.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit db1c7d77976775483a8ef240b4c705f113e13ea1.
We're reinstating the pktcdvd driver, which needs this API.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The cacheline section holding this variable has two gaps, where one is
caused by this bool not packing well with structs. This causes it to
blow into the next cacheline. Move the variable, shrinking io_ring_ctx
by a full cacheline in size.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Use signed integer in ipv6_skip_exthdr() called from nf_confirm().
Reported by static analysis tooling, patch from Florian Westphal.
2) Missing set type checks in nf_tables: Validate that set declaration
matches the an existing set type, otherwise bail out with EEXIST.
Currently, nf_tables silently accepts the re-declaration with a
different type but it bails out later with EINVAL when the user adds
entries to the set. This fix is relatively large because it requires
two preparation patches that are included in this batch.
3) Do not ignore updates of timeout and gc_interval parameters in
existing sets.
4) Fix a hang when 0/0 subnets is added to a hash:net,port,net type of
ipset. Except hash:net,port,net and hash:net,iface, the set types don't
support 0/0 and the auxiliary functions rely on this fact. So 0/0 needs
a special handling in hash:net,port,net which was missing (hash:net,iface
was not affected by this bug), from Jozsef Kadlecsik.
5) When adding/deleting large number of elements in one step in ipset,
it can take a reasonable amount of time and can result in soft lockup
errors. This patch is a complete rework of the previous version in order
to use a smaller internal batch limit and at the same time removing
the external hard limit to add arbitrary number of elements in one step.
Also from Jozsef Kadlecsik.
Except for patch #1, which fixes a bug introduced in the previous net-next
development cycle, anything else has been broken for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel.
Fixes: 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete")
Reported-by: syzbot+9204e7399656300bf271@syzkaller.appspotmail.com
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When ceph releasing the file_lock it will try to get the inode pointer
from the fl->fl_file, which the memory could already be released by
another thread in filp_close(). Because in VFS layer the fl->fl_file
doesn't increase the file's reference counter.
Will switch to use ceph dedicate lock info to track the inode.
And in ceph_fl_release_lock() we should skip all the operations if the
fl->fl_u.ceph.inode is not set, which should come from the request
file_lock. And we will set fl->fl_u.ceph.inode when inserting it to the
inode lock list, which is when copying the lock.
Link: https://tracker.ceph.com/issues/57986
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
When MTD or MTD_CFI_GEOMETRY is disabled, the spi-intel driver
fails to build, as it includes the shared CFI header:
include/linux/mtd/cfi.h:62:2: error: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
62 | #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work.
linux/mtd/spi-nor.h does not actually need to include cfi.h, so
remove the inclusion here to fix the warning. This uncovers a
missing #include in spi-nor/core.c so add that there to
prevent a different build issue.
Fixes: e23e5a05d1fd ("mtd: spi-nor: intel-spi: Convert to SPI MEM")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com>
Acked-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20221220141352.1486360-1-arnd@kernel.org
|
|
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes: 7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fddb ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
|
|
Fix SRIOV VST mode behavior to insert cvlan when a guest tag is already
present in the frame. Previous VST mode behavior was to drop packets or
override existing tag, depending on the device version.
In this patch we fix this behavior by correctly building the HW steering
rule with a push vlan action, or for older devices we ask the FW to stack
the vlan when a vlan is already present.
Fixes: 07bab9502641 ("net/mlx5: E-Switch, Refactor eswitch ingress acl codes")
Fixes: dfcb1ed3c331 ("net/mlx5: E-Switch, Vport ingress/egress ACLs rules for VST mode")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes: 84fef62d135b ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Pull block fixes from Jens Axboe:
- Various fixes for BFQ (Yu, Yuwei)
- Fix for loop command line parsing (Isaac)
- No need to specifically clear REQ_ALLOC_CACHE on IOPOLL downgrade
anymore (me)
- blk-iocost enum fix for newer gcc (Jiri)
- UAF fix for queue release (Ming)
- blk-iolatency error handling memory leak fix (Tejun)
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes across the board, mostly improvements and cleanups"
* tag 'pwm/for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (42 commits)
pwm: pca9685: Convert to i2c's .probe_new()
pwm: sun4i: Propagate errors in .get_state() to the caller
pwm: Handle .get_state() failures
pwm: sprd: Propagate errors in .get_state() to the caller
pwm: rockchip: Propagate errors in .get_state() to the caller
pwm: mtk-disp: Propagate errors in .get_state() to the caller
pwm: imx27: Propagate errors in .get_state() to the caller
pwm: cros-ec: Propagate errors in .get_state() to the caller
pwm: crc: Propagate errors in .get_state() to the caller
leds: qcom-lpg: Propagate errors in .get_state() to the caller
drm/bridge: ti-sn65dsi86: Propagate errors in .get_state() to the caller
pwm/tracing: Also record trace events for failed API calls
pwm: Make .get_state() callback return an error code
pwm: pxa: Enable for MMP platform
pwm: pxa: Add reference manual link and limitations
pwm: pxa: Use abrupt shutdown mode
pwm: pxa: Remove clk enable/disable from pxa_pwm_config
pwm: pxa: Set duty cycle to 0 when disabling PWM
pwm: pxa: Remove pxa_pwm_enable/disable
pwm: mediatek: Add support for MT7986
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"rproc-virtio device names are now auto generated, to avoid conflicts
between remoteproc instances.
The imx_rproc driver is extended with support for communicating with
and attaching to a running M4 on i.MX8QXP, as well as support for
attaching to the M4 after self-recovering from a crash. Support is
added for i.MX8QM and mailbox channels are reconnected during the
recovery process, in order to avoid data corruption.
The Xilinx Zynqmp firmware interface is extended and support for the
Xilinx R5 RPU is introduced.
Various resources leaks, primarily in error paths, throughout the
Qualcomm drivers are corrected.
Lastly a fix to ensure that pm_relax is invoked even if the remoteproc
instance is stopped between a crash is being reported and the recovery
handler is scheduled"
* tag 'rproc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (25 commits)
remoteproc: core: Do pm_relax when in RPROC_OFFLINE state
remoteproc: qcom: q6v5: Fix missing clk_disable_unprepare() in q6v5_wcss_qcs404_power_on()
remoteproc: qcom_q6v5_pas: Fix missing of_node_put() in adsp_alloc_memory_region()
remoteproc: qcom_q6v5_pas: detach power domains on remove
remoteproc: qcom_q6v5_pas: disable wakeup on probe fail or remove
remoteproc: qcom: q6v5: Fix potential null-ptr-deref in q6v5_wcss_init_mmio()
remoteproc: sysmon: fix memory leak in qcom_add_sysmon_subdev()
remoteproc: sysmon: Make QMI message rules const
drivers: remoteproc: Add Xilinx r5 remoteproc driver
firmware: xilinx: Add RPU configuration APIs
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
arm64: dts: xilinx: zynqmp: Add RPU subsystem device node
dt-bindings: remoteproc: Add Xilinx RPU subsystem bindings
remoteproc: core: Use device_match_of_node()
remoteproc: imx_rproc: Correct i.MX93 DRAM mapping
remoteproc: imx_rproc: Enable attach recovery for i.MX8QM/QXP
remoteproc: imx_rproc: Request mbox channel later
remoteproc: imx_rproc: Support i.MX8QM
remoteproc: imx_rproc: Support kicking Mcore from Linux for i.MX8QXP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Ampere Computing SMpro
- Add support for TI TPS65219 PMIC
New Functionality:
- Add support for multiple devices of the same type; rk808
Fix-ups:
- Convert a bunch of I2C class drivers over to .probe_new()
- Remove superfluous includes; mc13xxx-*, palmas, timberdale
- Use correct includes for GPIO handling; madera-core
- Convert to GPIOD; twl6040
- Remove unused platform data handling; twl6040
- Device Tree changes; many
- Remove unused drivers; dm355evm_msp, davinci_voicecodec, htc-i2cpld
- Add support for modules; palmas
- Enable COMPILE_TEST support; intel_soc_pmic*
- Trivial: spelling / whitespace fixes; mc13xxx-spi
- Replace old PM helpers with new ones; many
- Convert deprecated mask_invert usage to unmask_base; many
- Use devm_*() calls; qcom_rpm
- MAINTAINER fix-ups
- Make use of improved / replaced APIs; palmas, fsl-imx25-tsadc,
stm32-lptimer, qcom_rpm, rohm-*
Bug Fixes:
- Add bounds / error checking; mt6360-core
- No sleeping inside critical sections; axp20x
- Fix missing dependencies; ROHM_BD957XMUF
- Repair error paths; qcom-pm8008"
* tag 'mfd-next-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (161 commits)
dt-bindings: mfd: da9062: Correct file name for watchdog
mfd: pm8008: Fix return value check in pm8008_probe()
mfd: rohm: Use dev_err_probe()
mfd: Drop obsolete dependencies on COMPILE_TEST
dt-bindings: mfd: da9062: Move IRQ to optional properties
mfd: qcom_rpm: Use devm_of_platform_populate() to simplify code
mfd: qcom_rpm: Fix an error handling path in qcom_rpm_probe()
mfd: stm32-lptimer: Use devm_platform_get_and_ioremap_resource()
mfd: rohm-bd9576: Convert to i2c's .probe_new()
mfd: fsl-imx25-tsadc: Use devm_platform_get_and_ioremap_resource()
dt-bindings: Fix maintainer email for a few ROHM ICs
mfd: palmas: Use device_get_match_data() to simplify the code
Input: Add tps65219 interrupt driven powerbutton
mfd: tps65219: Add driver for TI TPS65219 PMIC
mfd: bd957x: Fix Kconfig dependency on REGMAP_IRQ
mfd: wcd934x: Convert irq chip to config regs
mfd: tps65090: Replace irqchip mask_invert with unmask_base
mfd: sun4i-gpadc: Replace irqchip mask_invert with unmask_base
mfd: stpmic1: Fix swapped mask/unmask in irq chip
mfd: sprd-sc27xx-spi: Replace irqchip mask_invert with unmask_base
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfsuid cleanup from Christian Brauner:
"This moves the ima specific vfs{g,u}id_t comparison helpers out of the
header and into the one file in ima where they are used.
We shouldn't incentivize people to use them by placing them into the
header. As discussed and suggested by Linus in [1] let's just define
them locally in the one file in ima where they are used"
Link: https://lore.kernel.org/lkml/CAHk-=wj4BpEwUd=OkTv1F9uykvSrsBNZJVHMp+p_+e2kiV71_A@mail.gmail.com [1]
* tag 'fs.vfsuid.ima.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
mnt_idmapping: move ima-only helpers to ima
|
