summaryrefslogtreecommitdiff
path: root/include/linux
AgeCommit message (Collapse)Author
2021-10-27block: Add a helper to validate the block sizeXie Yongji
There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-27block: avoid extra iter advance with async iocbPavel Begunkov
Nobody cares about iov iterators state if we return -EIOCBQUEUED, so as the we now have __blkdev_direct_IO_async(), which gets pages only once, we can skip expensive iov_iter_advance(). It's around 1-2% of all CPU spent. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a6158edfbfa2ae3bc24aed29a72f035df18fad2f.1635337135.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-26block: Add independent access ranges supportDamien Le Moal
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page (for ATA) contain parameters describing the set of contiguous LBAs that can be served independently by a single LUN multi-actuator hard-disk. Similarly, a logically defined block device composed of multiple disks can in some cases execute requests directed at different sector ranges in parallel. A dm-linear device aggregating 2 block devices together is an example. This patch implements support for exposing a block device independent access ranges to the user through sysfs to allow optimizing device accesses to increase performance. To describe the set of independent sector ranges of a device (actuators of a multi-actuator HDDs or table entries of a dm-linear device), The type struct blk_independent_access_ranges is introduced. This structure describes the sector ranges using an array of struct blk_independent_access_range structures. This range structure defines the start sector and number of sectors of the access range. The ranges in the array cannot overlap and must contain all sectors within the device capacity. The function disk_set_independent_access_ranges() allows a device driver to signal to the block layer that a device has multiple independent access ranges. In this case, a struct blk_independent_access_ranges is attached to the device request queue by the function disk_set_independent_access_ranges(). The function disk_alloc_independent_access_ranges() is provided for drivers to allocate this structure. struct blk_independent_access_ranges contains kobjects (struct kobject) to expose to the user through sysfs the set of independent access ranges supported by a device. When the device is initialized, sysfs registration of the ranges information is done from blk_register_queue() using the block layer internal function disk_register_independent_access_ranges(). If a driver calls disk_set_independent_access_ranges() for a registered queue, e.g. when a device is revalidated, disk_set_independent_access_ranges() will execute disk_register_independent_access_ranges() to update the sysfs attribute files. The sysfs file structure created starts from the independent_access_ranges sub-directory and contains the start sector and number of sectors of each range, with the information for each range grouped in numbered sub-directories. E.g. for a dual actuator HDD, the user sees: $ tree /sys/block/sdk/queue/independent_access_ranges/ /sys/block/sdk/queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector For a regular device with a single access range, the independent_access_ranges sysfs directory does not exist. Device revalidation may lead to changes to this structure and to the attribute values. When manipulated, the queue sysfs_lock and sysfs_dir_lock mutexes are held for atomicity, similarly to how the blk-mq and elevator sysfs queue sub-directories are protected. The code related to the management of independent access ranges is added in the new file block/blk-ia-ranges.c. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22sched: make task_struct->plug always definedJens Axboe
If CONFIG_BLOCK isn't set, then it's an empty struct anyway. Just make it generally available, so we don't break the compile: kernel/sched/core.c: In function ‘sched_submit_work’: kernel/sched/core.c:6346:35: error: ‘struct task_struct’ has no member named ‘plug’ 6346 | blk_flush_plug(tsk->plug, true); | ^~ kernel/sched/core.c: In function ‘io_schedule_prepare’: kernel/sched/core.c:8357:20: error: ‘struct task_struct’ has no member named ‘plug’ 8357 | if (current->plug) | ^~ kernel/sched/core.c:8358:39: error: ‘struct task_struct’ has no member named ‘plug’ 8358 | blk_flush_plug(current->plug, true); | ^~ Reported-by: Nathan Chancellor <nathan@kernel.org> Fixes: 008f75a20e70 ("block: cleanup the flush plug helpers") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21blk-crypto: rename blk_keyslot_manager to blk_crypto_profileEric Biggers
blk_keyslot_manager is misnamed because it doesn't necessarily manage keyslots. It actually does several different things: - Contains the crypto capabilities of the device. - Provides functions to control the inline encryption hardware. Originally these were just for programming/evicting keyslots; however, new functionality (hardware-wrapped keys) will require new functions here which are unrelated to keyslots. Moreover, device-mapper devices already (ab)use "keyslot_evict" to pass key eviction requests to their underlying devices even though device-mapper devices don't have any keyslots themselves (so it really should be "evict_key", not "keyslot_evict"). - Sometimes (but not always!) it manages keyslots. Originally it always did, but device-mapper devices don't have keyslots themselves, so they use a "passthrough keyslot manager" which doesn't actually manage keyslots. This hack works, but the terminology is unnatural. Also, some hardware doesn't have keyslots and thus also uses a "passthrough keyslot manager" (support for such hardware is yet to be upstreamed, but it will happen eventually). Let's stop having keyslot managers which don't actually manage keyslots. Instead, rename blk_keyslot_manager to blk_crypto_profile. This is a fairly big change, since for consistency it also has to update keyslot manager-related function names, variable names, and comments -- not just the actual struct name. However it's still a fairly straightforward change, as it doesn't change any actual functionality. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-4-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21blk-crypto: rename keyslot-manager files to blk-crypto-profileEric Biggers
In preparation for renaming struct blk_keyslot_manager to struct blk_crypto_profile, rename the keyslot-manager.h and keyslot-manager.c source files. Renaming these files separately before making a lot of changes to their contents makes it easier for git to understand that they were renamed. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20211018180453.40441-3-ebiggers@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21block: Add invalidate_disk() helper to invalidate the gendiskXie Yongji
To hide internal implementation and simplify some driver code, this adds a helper to invalidate the gendisk. It will clean the gendisk's associated buffer/page caches and reset its internal states. Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20210922123711.187-2-xieyongji@bytedance.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-21percpu_ref: percpu_ref_tryget_live() version holding RCUPavel Begunkov
Add percpu_ref_tryget_live_rcu(), which is a version of percpu_ref_tryget_live() but the user is responsible for enclosing it in a RCU read lock section. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Acked-by: Dennis Zhou <dennis@kernel.org> Link: https://lore.kernel.org/r/3066500d7a6eb3e03f10adf98b87fdb3b1c49db8.1634822969.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20block: cleanup the flush plug helpersChristoph Hellwig
Consolidate the various helpers into a single blk_flush_plug helper that takes a plk_plug and the from_scheduler bool and switch all callsites to call it directly. Checks that the plug is non-NULL must be performed by the caller, something that most already do anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20blk-mq: move blk_mq_flush_plug_list to block/blk-mq.hChristoph Hellwig
This helper is internal to the block layer. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211020144119.142582-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20block: inline a part of bio_release_pages()Pavel Begunkov
Inline BIO_NO_PAGE_REF check of bio_release_pages() to avoid function call. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-20block: turn macro helpers into inline functionsPavel Begunkov
Replace bio_set_dev() with an identical inline helper and move it further to fix a dependency problem with bio_associate_blkg(). Do the same for bio_copy_dev(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19blk-mq: support concurrent queue quiesce/unquiesceMing Lei
blk_mq_quiesce_queue() has been used a bit wide now, so far we don't support concurrent/nested quiesce. One biggest issue is that unquiesce can happen unexpectedly in case that quiesce/unquiesce are run concurrently from more than one context. This patch introduces q->mq_quiesce_depth to deal concurrent quiesce, and we only unquiesce queue when it is the last/outer-most one of all contexts. Several kernel panic issue has been reported[1][2][3] when running stress quiesce test. And this patch has been verified in these reports. [1] https://lore.kernel.org/linux-block/9b21c797-e505-3821-4f5b-df7bf9380328@huawei.com/T/#m1fc52431fad7f33b1ffc3f12c4450e4238540787 [2] https://lore.kernel.org/linux-block/9b21c797-e505-3821-4f5b-df7bf9380328@huawei.com/T/#m10ad90afeb9c8cc318334190a7c24c8b5c5e0722 [3] https://listman.redhat.com/archives/dm-devel/2021-September/msg00189.html Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211014081710.1871747-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19block: attempt direct issue of plug listJens Axboe
If we have just one queue type in the plug list, then we can extend our direct issue to cover a full plug list as well. This allows sending a batch of requests for direct issue, which is more efficient than doing one-at-a-time kind of issue. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19block: change plugging to use a singly linked listJens Axboe
Use a singly linked list for the blk_plug. This saves 8 bytes in the blk_plug struct, and makes for faster list manipulations than doubly linked lists. As we don't use the doubly linked lists for anything, singly linked is just fine. This yields a bump in default (merging enabled) performance from 7.0 to 7.1M IOPS, and ~7.5M IOPS with merging disabled. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19block: move blk_mq_tag_to_rq() inlineJens Axboe
This is in the fast path of driver issue or completion, and it's a single array index operation. Move it inline to avoid a function call for it. This does mean making struct blk_mq_tags block layer public, but there's not really much in there. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-19block: move bdev_read_only() into the headerJens Axboe
This is called for every write in the fast path, move it inline next to get_disk_ro() which is called internally. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: add support for blk_mq_end_request_batch()Jens Axboe
Instead of calling blk_mq_end_request() on a single request, add a helper that takes the new struct io_comp_batch and completes any request stored in there. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18sbitmap: add helper to clear a batch of tagsJens Axboe
sbitmap currently only supports clearing tags one-by-one, add a helper that allows the caller to pass in an array of tags to clear. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: add a struct io_comp_batch argument to fops->iopoll()Jens Axboe
struct io_comp_batch contains a list head and a completion handler, which will allow completions to more effciently completed batches of IO. For now, no functional changes in this patch, we just define the io_comp_batch structure and add the argument to the file_operations iopoll handler. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: provide helpers for rq_list manipulationJens Axboe
Instead of open-coding the list additions, traversal, and removal, provide a basic set of helpers. Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: remove some blk_mq_hw_ctx debugfs entriesJens Axboe
Just like the blk_mq_ctx counterparts, we've got a bunch of counters in here that are only for debugfs and are of questionnable value. They are: - dispatched, index of how many requests were dispatched in one go - poll_{considered,invoked,success}, which track poll sucess rates. We're confident in the iopoll implementation at this point, don't bother tracking these. As a bonus, this shrinks each hardware queue from 576 bytes to 512 bytes, dropping a whole cacheline. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: store elevator state in requestJens Axboe
Add an rq private RQF_ELV flag, which tells the block layer that this request was initialized on a queue that has an IO scheduler attached. This allows for faster checking in the fast path, rather than having to deference rq->q later on. Elevator switching does full quiesce of the queue before detaching an IO scheduler, so it's safe to cache this in the request itself. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: improve layout of struct requestJens Axboe
It's been a while since this was analyzed, move some members around to better flow with the use case. Initial state up top, and queued state after that. This improves my peak case by about 1.5%, from 7750K to 7900K IOPS. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: don't bother iter advancing a fully done bioJens Axboe
If we're completing nbytes and nbytes is the size of the bio, don't bother with calling into the iterator increment helpers. Just clear the bio size and we're done. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: cache request queue in bdevPavel Begunkov
There are tons of places where we need to get a request_queue only having bdev, which turns into bdev->bd_disk->queue. There are probably a hundred of such places considering inline helpers, and enough of them are in hot paths. Cache queue pointer in struct block_device and make use of it in bdev_get_queue(). Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a3bfaecdd28956f03629d0ca5c63ebc096e1c809.1634219547.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: switch polling to be bio basedChristoph Hellwig
Replace the blk_poll interface that requires the caller to keep a queue and cookie from the submissions with polling based on the bio. Polling for the bio itself leads to a few advantages: - the cookie construction can made entirely private in blk-mq.c - the caller does not need to remember the request_queue and cookie separately and thus sidesteps their lifetime issues - keeping the device and the cookie inside the bio allows to trivially support polling BIOs remapping by stacking drivers - a lot of code to propagate the cookie back up the submission path can be removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: define 'struct bvec_iter' as packedMing Lei
'struct bvec_iter' is embedded into 'struct bio', define it as packed so that we can get one extra 4bytes for other uses without expanding bio. 'struct bvec_iter' is often allocated on stack, so making it packed doesn't affect performance. Also I have run io_uring on both nvme/null_blk, and not observe performance effect in this way. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: rename REQ_HIPRI to REQ_POLLEDChristoph Hellwig
Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague, the bio flag is specific to the polling implementation, so rename and document it properly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18io_uring: don't sleep when polling for I/OChristoph Hellwig
There is no point in sleeping for the expected I/O completion timeout in the io_uring async polling model as we never poll for a specific I/O. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-11-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: replace the spin argument to blk_iopoll with a flags argumentChristoph Hellwig
Switch the boolean spin argument to blk_poll to passing a set of flags instead. This will allow to control polling behavior in a more fine grained way. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-10-hch@lst.de [axboe: adapt to changed io_uring iopoll] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18blk-mq: remove blk_qc_t_validChristoph Hellwig
Move the trivial check into the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18blk-mq: remove blk_qc_t_to_tag and blk_qc_t_is_internalChristoph Hellwig
Merge both functions into their only caller to keep the blk-mq tag to blk_qc_t mapping as private as possible in blk-mq.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18blk-mq: factor out a blk_qc_to_hctx helperChristoph Hellwig
Add a helper to get the hctx from a request_queue and cookie, and fold the blk_qc_t_to_queue_num helper into it as no other callers are left. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Link: https://lore.kernel.org/r/20211012111226.760968-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18sbitmap: add __sbitmap_queue_get_batch()Jens Axboe
The block layer tag allocation batching still calls into sbitmap to get each tag, but we can improve on that. Add __sbitmap_queue_get_batch(), which returns a mask of tags all at once, along with an offset for those tags. An example return would be 0xff, where bits 0..7 are set, with tag_offset == 128. The valid tags in this case would be 128..135. A batch is specific to an individual sbitmap_map, hence it cannot be larger than that. The requested number of tags is automatically reduced to the max that can be satisfied with a single map. On failure, 0 is returned. Caller should fall back to single tag allocation at that point/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: mark bio_truncate staticChristoph Hellwig
bio_truncate is only used in bio.c, so mark it static. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-9-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move bio_get_{first,last}_bvec out of bio.hChristoph Hellwig
bio_get_first_bvec and bio_get_last_bvec are only used in blk-merge.c, so move them there. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-8-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: mark __bio_try_merge_page staticChristoph Hellwig
Mark __bio_try_merge_page static and move it up a bit to avoid the need for a forward declaration. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move bio_full out of bio.hChristoph Hellwig
bio_full is only used in bio.c, so move it there. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-6-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: fold bio_cur_bytes into blk_rq_cur_bytesChristoph Hellwig
Fold bio_cur_bytes into the only caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move bio_mergeable out of bio.hChristoph Hellwig
bio_mergeable is only needed by I/O schedulers, so move it to blk-mq-sched.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: don't include <linux/ioprio.h> in <linux/bio.h>Christoph Hellwig
bio.h doesn't need any of the definitions from ioprio.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: remove BIO_BUG_ONChristoph Hellwig
BIO_DEBUG is always defined, so just switch the two instances to use BUG_ON directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012161804.991559-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move the *blkdev_ioctl declarations out of blkdev.hChristoph Hellwig
These are only used inside of block/. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211012104450.659013-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: pre-allocate requests if plug is started and is a batchJens Axboe
The caller typically has a good (or even exact) idea of how many requests it needs to submit. We can make the request/tag allocation a lot more efficient if we just allocate N requests/tags upfront when we queue the first bio from the batch. Provide a new plug start helper that allows the caller to specify how many IOs are expected. This sets plug->nr_ios, and we can use that for smarter request allocation. The plug provides a holding spot for requests, and request allocation will check it before calling into the normal request allocation path. The blk_finish_plug() is called, check if there are unused requests and free them. This should not happen in normal operations. The exception is if we get merging, then we may be left with requests that need freeing when done. This raises the per-core performance on my setup from ~5.8M to ~6.1M IOPS. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: bump max plugged deferred size from 16 to 32Jens Axboe
Particularly for NVMe with efficient deferred submission for many requests, there are nice benefits to be seen by bumping the default max plug count from 16 to 32. This is especially true for virtualized setups, where the submit part is more expensive. But can be noticed even on native hardware. Reduce the multiple queue factor from 4 to 2, since we're changing the default size. While changing it, move the defines into the block layer private header. These aren't values that anyone outside of the block layer uses, or should use. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18blk-mq: Change shared sbitmap naming to shared tagsJohn Garry
Now that shared sbitmap support really means shared tags, rename symbols to match that. Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1633429419-228500-15-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18blk-mq: Use shared tags for shared sbitmap supportJohn Garry
Currently we use separate sbitmap pairs and active_queues atomic_t for shared sbitmap support. However a full sets of static requests are used per HW queue, which is quite wasteful, considering that the total number of requests usable at any given time across all HW queues is limited by the shared sbitmap depth. As such, it is considerably more memory efficient in the case of shared sbitmap to allocate a set of static rqs per tag set or request queue, and not per HW queue. So replace the sbitmap pairs and active_queues atomic_t with a shared tags per tagset and request queue, which will hold a set of shared static rqs. Since there is now no valid HW queue index to be passed to the blk_mq_ops .init and .exit_request callbacks, pass an invalid index token. This changes the semantics of the APIs, such that the callback would need to validate the HW queue index before using it. Currently no user of shared sbitmap actually uses the HW queue index (as would be expected). Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/1633429419-228500-13-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: Rename BLKDEV_MAX_RQ -> BLKDEV_DEFAULT_RQJohn Garry
It is a bit confusing that there is BLKDEV_MAX_RQ and MAX_SCHED_RQ, as the name BLKDEV_MAX_RQ would imply the max requests always, which it is not. Rename to BLKDEV_MAX_RQ to BLKDEV_DEFAULT_RQ, matching its usage - that being the default number of requests assigned when allocating a request queue. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/1633429419-228500-3-git-send-email-john.garry@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18block: move struct request to blk-mq.hChristoph Hellwig
struct request is only used by blk-mq drivers, so move it and all related declarations to blk-mq.h. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20210920123328.1399408-18-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.0.4) at 2026-01-08 06:34:14 +0000