| Age | Commit message (Collapse) | Author |
|---|
|
Sometimes, the result of the rhashtable_lookup() is expected to be found.
Therefore, we can use likely() for such cases.
Following new functions are introduced, which will use likely or unlikely
during the lookup:
rhashtable_lookup_likely
rhltable_lookup_likely
A micro-benchmark is made for these new functions: lookup a existed entry
repeatedly for 100000000 times, and rhashtable_lookup_likely() gets ~30%
speedup.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix kernel-doc warnings by using correct kernel-doc syntax and
formatting to prevent warnings:
Warning: include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_STATIC' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_MULTIPLIER' not described in enum 'qcom_tzmem_policy'
Warning: ../include/linux/firmware/qcom/qcom_tzmem.h:25 Enum value
'QCOM_TZMEM_POLICY_ON_DEMAND' not described in enum 'qcom_tzmem_policy'
Fixes: 84f5a7b67b61 ("firmware: qcom: add a dedicated TrustZone buffer allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20251017191323.1820167-1-rdunlap@infradead.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- fix for sticky fingers handling in hid-multitouch (Benjamin
Tissoires)
- fix for reporting of 0 battery levels (Dmitry Torokhov)
- build fix for hid-haptic in certain configurations (Jonathan Denose)
- improved probe and avoiding spamming kernel log by hid-nintendo
(Vicki Pfau)
- fix for OOB in hid-cp2112 (Deepak Sharma)
- interrupt handling fix for intel-thc-hid (Even Xu)
- a couple of new device IDs and device-specific quirks
* tag 'hid-for-linus-2025101701' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Add HIDPP_QUIRK_RESET_HI_RES_SCROLL
selftests/hid: add tests for missing release on the Dell Synaptics
HID: multitouch: fix sticky fingers
HID: multitouch: fix name of Stylus input devices
HID: hid-input: only ignore 0 battery events for digitizers
HID: hid-debug: Fix spelling mistake "Rechargable" -> "Rechargeable"
HID: Kconfig: Fix build error from CONFIG_HID_HAPTIC
HID: nintendo: Rate limit IMU compensation message
HID: nintendo: Wait longer for initial probe
HID: core: Add printk_ratelimited variants to hid_warn() etc
HID: quirks: Add ALWAYS_POLL quirk for VRS R295 steering wheel
HID: quirks: avoid Cooler Master MM712 dongle wakeup bug
HID: cp2112: Add parameter validation to data length
HID: intel-thc-hid: intel-quickspi: Add ARL PCI Device Id's
HID: intel-thc-hid: Intel-quickspi: switch first interrupt from level to edge detection
HID: intel-thc-hid: intel-quicki2c: Fix wrong type casting
|
|
Pull bpf fixes from Alexei Starovoitov:
- Replace bpf_map_kmalloc_node() with kmalloc_nolock() to fix kmemleak
imbalance in tracking of bpf_async_cb structures (Alexei Starovoitov)
- Make selftests/bpf arg_parsing.c more robust to errors (Andrii
Nakryiko)
- Fix redefinition of 'off' as different kind of symbol when I40E
driver is builtin (Brahmajit Das)
- Do not disable preemption in bpf_test_run (Sahil Chandna)
- Fix memory leak in __lookup_instance error path (Shardul Bankar)
- Ensure test data is flushed to disk before reading it (Xing Guo)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix redefinition of 'off' as different kind of symbol
bpf: Do not disable preemption in bpf_test_run().
bpf: Fix memory leak in __lookup_instance error path
selftests: arg_parsing: Ensure data is flushed to disk before reading.
bpf: Replace bpf_map_kmalloc_node() with kmalloc_nolock() to allocate bpf_async_cb structures.
selftests/bpf: make arg_parsing.c more robust to crashes
bpf: test_run: Fix ctx leak in bpf_prog_test_run_xdp error path
|
|
Pull NFS client fixes from Anna Schumaker:
- Fix for FlexFiles mirror->dss allocation
- Apply delay_retrans to async operations
- Check if suid/sgid is cleared after a write when needed
- Fix setting the state renewal timer for early mounts after a reboot
* tag 'nfs-for-6.18-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS4: Fix state renewals missing after boot
NFS: check if suid/sgid was cleared after a write as needed
NFS4: Apply delay_retrans to async operations
NFSv4/flexfiles: fix to allocate mirror->dss before use
|
|
Accessing non-existent PMU registers causes an SError, halting the
system.
Implement read and write access tables for the gs101-PMU to specify
which registers are read- and/or writable to avoid that SError.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251009-gs101-pmu-regmap-tables-v2-3-2d64f5261952@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
|
|
In order to create a CMA heap instance for each CMA region found in the
system, we need to register each of these instances.
While it would appear trivial, the CMA regions are created super early
in the kernel boot process, before most of the subsystems are
initialized. Thus, we can't just create an exported function to create a
heap from the CMA region being initialized.
What we can do however is create a two-step process, where we collect
all the CMA regions into an array early on, and then when we initialize
the heaps we iterate over that array and create the heaps from the CMA
regions we collected.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://lore.kernel.org/r/20251013-dma-buf-ecc-heap-v8-2-04ce150ea3d9@kernel.org
|
|
The pm_vt_switch_required() function fails silently when memory
allocation fails, offering no indication to callers that the operation
was unsuccessful. This behavior prevents drivers from handling allocation
errors correctly or implementing retry mechanisms. By ensuring that
failures are reported back to the caller, drivers can make informed
decisions, improve robustness, and avoid unexpected behavior during
critical power management operations.
Change the function signature to return an integer error code and modify
the implementation to return -ENOMEM when kmalloc() fails. Update both
the function declaration and the inline stub in include/linux/pm.h to
maintain consistency across CONFIG_VT_CONSOLE_SLEEP configurations.
The function now returns:
- 0 on success (including when updating existing entries)
- -ENOMEM when memory allocation fails
This change improves error reporting without breaking existing callers,
as the current callers in drivers/video/fbdev/core/fbmem.c already
ignore the return value, making this a backward-compatible improvement.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20251013193028.89570-1-mrout@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
TASCAM FW-1884/FW-1804/FW-1082 is too lazy to repspond to asynchronous
request at S400. The asynchronous transaction often results in timeout.
This is a problematic quirk.
This commit adds support for the quirk. When identifying the new quirk
flag, then the transaction speed is configured at S200.
Link: https://lore.kernel.org/r/20251018035532.287124-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
Add two functions to atomically replace RCU-protected hlist_nulls entries.
Keep using WRITE_ONCE() to assign values to ->next and ->pprev, as
mentioned in the patch below:
commit efd04f8a8b45 ("rcu: Use WRITE_ONCE() for assignments to ->next for
rculist_nulls")
commit 860c8802ace1 ("rcu: Use WRITE_ONCE() for assignments to ->pprev for
hlist_nulls")
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Link: https://patch.msgid.link/20251015020236.431822-2-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ishtp_get_connection_state() function for struct ishtp_cl, allowing
ishtp client drivers to retrieve the current connection state.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
During suspend/resume tests with S2IDLE, some ISH functional failures were
observed because of delay in executing ISH resume handler. Here
schedule_work() is used from resume handler to do actual work.
schedule_work() uses system_wq, which is a per CPU work queue. Although
the queuing is not bound to a CPU, but it prefers local CPU of the caller,
unless prohibited.
Users of this work queue are not supposed to queue long running work.
But in practice, there are scenarios where long running work items are
queued on other unbound workqueues, occupying the CPU. As a result, the
ISH resume handler may not get a chance to execute in a timely manner.
In one scenario, one of the ish_resume_handler() executions was delayed
nearly 1 second because another work item on an unbound workqueue occupied
the same CPU. This delay causes ISH functionality failures.
A similar issue was previously observed where the ISH HID driver timed out
while getting the HID descriptor during S4 resume in the recovery kernel,
likely caused by the same workqueue contention problem.
Create dedicated unbound workqueues for all ISH operations to allow work
items to execute on any available CPU, eliminating CPU-specific bottlenecks
and improving resume reliability under varying system loads. Also ISH has
three different components, a bus driver which implements ISH protocols, a
PCI interface layer and HID interface. Use one dedicated work queue for all
of them.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Format the kernel-doc for SCALE_HW_CALIB_INVALID correctly to
avoid a kernel-doc warning:
Warning: include/linux/misc_cgroup.h:26 Enum value
'MISC_CG_RES_TDX' not described in enum 'misc_res_type'
Fixes: 7c035bea9407 ("KVM: TDX: Register TDX host key IDs to cgroup misc controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc cleanup from Ulf Hansson:
"Move rpmb_frame struct and constants to rpmb common header
This helps us to avoid sharing an immutable branch between our git
trees. I was planning to send it before rc1, but I didn't make it"
* tag 'mmc-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
rpmb: move rpmb_frame struct and constants to common header
|
|
soc/drivers
arm64: Xilinx SOC changes for 6.18
firmware:
- Add debugfs interface
- Wire versal-net compatible string
- Change SOC family detection
* tag 'zynqmp-soc-for-6.18' of https://github.com/Xilinx/linux-xlnx:
drivers: firmware: xilinx: Switch to new family code in zynqmp_pm_get_family_info()
drivers: firmware: xilinx: Add unique family code for all platforms
firmware: xilinx: Add Versal NET platform compatible string
firmware: xilinx: Add debugfs support for PM_GET_NODE_STATUS
|
|
can_change_mtu() became obsolete by commit 23049938605b ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 0f022d32c3ec ("net/sched: Fix mirred deadlock on device recursion")
added code in the fast path, even when act_mirred is not used.
Prepare its revert by implementing loop detection in act_mirred.
Adds an array of device pointers in struct netdev_xmit.
tcf_mirred_is_act_redirect() can detect if the array
already contains the target device.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251014171907.3554413-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pci_msi_create_irq_domain() is now unused. Delete it.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-6.19
Pull in tip/sched/core to receive:
50653216e4ff ("sched: Add support to pick functions to take rf")
4c95380701f5 ("sched/ext: Fold balance_scx() into pick_task_scx()")
which will enable clean integration of DL server support among other things.
This conflicts with the following from sched_ext/for-6.18-fixes:
a8ad873113d3 ("sched_ext: defer queue_balance_callback() until after ops.dispatch")
which adds maybe_queue_balance_callback() to balance_scx() which is removed
by 50653216e4ff. Resolve by moving the invocation to pick_task_scx() in the
equivalent location.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
The IRQCHIP_PLATFORM_DRIVER macros can be used to convert OF irqchip
drivers to platform drivers but currently reuse the OF init callback
prototype that only takes OF nodes as arguments. This forces drivers to
do reverse lookups of their struct devices during probe if they need
them for things like dev_printk() and device managed resources.
Half of the drivers doing reverse lookups also currently fail to release
the additional reference taken during the lookup, while other drivers
have had the reference leak plugged in various ways (e.g. using
non-intuitive cleanup constructs which still confuse static checkers).
Switch to using a probe callback that takes a platform device as its
first argument to simplify drivers and plug the remaining (mostly
benign) reference leaks.
Fixes: 32c6c054661a ("irqchip: Add Broadcom BCM2712 MSI-X interrupt controller")
Fixes: 70afdab904d2 ("irqchip: Add IMX MU MSI controller driver")
Fixes: a6199bb514d8 ("irqchip: Add Qualcomm MPM controller driver")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
|
|
Last user of linux/gpio/legacy-of-mm-gpiochip.h is gone.
Remove linux/gpio/legacy-of-mm-gpiochip.h and
CONFIG_OF_GPIO_MM_GPIOCHIP
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Some pick functions like the internal pick_next_task_fair() already take
rf but some others dont. We need this for scx's server pick function.
Prepare for this by having pick functions accept it.
[peterz: - added RETRY_TASK handling
- removed pick_next_task_fair indirection]
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
Hopefully saner naming.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
|
|
As proposed a long while ago -- and half done by scx -- wrap the
scheduler's 'change' pattern in a guard helper.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
|
|
The blocker tracking mechanism assumes that lock pointers are at least
4-byte aligned to use their lower bits for type encoding.
However, as reported by Eero Tamminen, some architectures like m68k
only guarantee 2-byte alignment of 32-bit values. This breaks the
assumption and causes two related WARN_ON_ONCE checks to trigger.
To fix this, the runtime checks are adjusted to silently ignore any lock
that is not 4-byte aligned, effectively disabling the feature in such
cases and avoiding the related warnings.
Thanks to Geert Uytterhoeven for bisecting!
Link: https://lkml.kernel.org/r/20250909145243.17119-1-lance.yang@linux.dev
Fixes: e711faaafbe5 ("hung_task: replace blocker_mutex with encoded blocker")
Signed-off-by: Lance Yang <lance.yang@linux.dev>
Reported-by: Eero Tamminen <oak@helsinkinet.fi>
Closes: https://lore.kernel.org/lkml/CAMuHMdW7Ab13DdGs2acMQcix5ObJK0O2dG_Fxzr8_g58Rc1_0g@mail.gmail.com
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Finn Thain <fthain@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The builtin DSQ queue data structures are meant to be used by a wide
range of different sched_ext schedulers with different demands on these
data structures. They might be per-cpu with low-contention, or
high-contention shared queues. Unfortunately, DSQs have a coarse-grained
lock around the whole data structure. Without going all the way to a
lock-free, more scalable implementation, a small step we can take to
reduce lock contention is to allow a lockless, small-fixed-cost peek at
the head of the queue.
This change allows certain custom SCX schedulers to cheaply peek at
queues, e.g. during load balancing, before locking them. But it
represents a few extra memory operations to update the pointer each
time the DSQ is modified, including a memory barrier on ARM so the write
appears correctly ordered.
This commit adds a first_task pointer field which is updated
atomically when the DSQ is modified, and allows any thread to peek at
the head of the queue without holding the lock.
Signed-off-by: Ryan Newton <newton@meta.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
This effectively reverts b0ba512e25d7 ("net: bcmgenet: enable driver to
work without a device tree"). There has never been an in-tree user of
struct bcmgenet_platform_data, all devices use OF or ACPI.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/108b4e64-55d4-4b4e-9a11-3c810c319d66@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have many places which open-code what's now is bpf_rcu_lock_held()
macro, so replace all those places with a clean and short macro invocation.
For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org
|
|
bpf_async_cb structures.
The following kmemleak splat:
[ 8.105530] kmemleak: Trying to color unknown object at 0xff11000100e918c0 as Black
[ 8.106521] Call Trace:
[ 8.106521] <TASK>
[ 8.106521] dump_stack_lvl+0x4b/0x70
[ 8.106521] kvfree_call_rcu+0xcb/0x3b0
[ 8.106521] ? hrtimer_cancel+0x21/0x40
[ 8.106521] bpf_obj_free_fields+0x193/0x200
[ 8.106521] htab_map_update_elem+0x29c/0x410
[ 8.106521] bpf_prog_cfc8cd0f42c04044_overwrite_cb+0x47/0x4b
[ 8.106521] bpf_prog_8c30cd7c4db2e963_overwrite_timer+0x65/0x86
[ 8.106521] bpf_prog_test_run_syscall+0xe1/0x2a0
happens due to the combination of features and fixes, but mainly due to
commit 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
It's using __GFP_HIGH, which instructs slub/kmemleak internals to skip
kmemleak_alloc_recursive() on allocation, so subsequent kfree_rcu()->
kvfree_call_rcu()->kmemleak_ignore() complains with the above splat.
To fix this imbalance, replace bpf_map_kmalloc_node() with
kmalloc_nolock() and kfree_rcu() with call_rcu() + kfree_nolock() to
make sure that the objects allocated with kmalloc_nolock() are freed
with kfree_nolock() rather than the implicit kfree() that kfree_rcu()
uses internally.
Note, the kmalloc_nolock() happens under bpf_spin_lock_irqsave(), so
it will always fail in PREEMPT_RT. This is not an issue at the moment,
since bpf_timers are disabled in PREEMPT_RT. In the future
bpf_spin_lock will be replaced with state machine similar to
bpf_task_work.
Fixes: 6d78b4473cdb ("bpf: Tell memcg to use allow_spinning=false path in bpf_timer_init()")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org
Link: https://lore.kernel.org/bpf/20251015000700.28988-1-alexei.starovoitov@gmail.com
|
|
Forward critical supply events downstream so consumers can react in
time. An under-voltage event on an upstream rail may otherwise never
reach end devices (e.g. eMMC).
Register a notifier on a regulator's supply when the supply is resolved,
and forward only REGULATOR_EVENT_UNDER_VOLTAGE to the consumer's notifier
chain. Event handling is deferred to process context via a workqueue; the
consumer rdev is lifetime-pinned and the rdev lock is held while calling
the notifier chain. The notifier is unregistered on regulator teardown.
No DT/UAPI changes. Behavior applies to all regulators with a supply.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20251001105650.2391477-1-o.rempel@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use macro module_driver to avoid boilerplate code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e5c37417-4984-4b57-8154-264deef61e0d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add some helper macros which can be used by livepatch source .patch
files to register callbacks, convert static calls to regular calls where
needed, and patch syscalls.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Add a new klp diff subcommand which performs a binary diff between two
object files and extracts changed functions into a new object which can
then be linked into a livepatch module.
This builds on concepts from the longstanding out-of-tree kpatch [1]
project which began in 2012 and has been used for many years to generate
livepatch modules for production kernels. However, this is a complete
rewrite which incorporates hard-earned lessons from 12+ years of
maintaining kpatch.
Key improvements compared to kpatch-build:
- Integrated with objtool: Leverages objtool's existing control-flow
graph analysis to help detect changed functions.
- Works on vmlinux.o: Supports late-linked objects, making it
compatible with LTO, IBT, and similar.
- Simplified code base: ~3k fewer lines of code.
- Upstream: No more out-of-tree #ifdef hacks, far less cruft.
- Cleaner internals: Vastly simplified logic for symbol/section/reloc
inclusion and special section extraction.
- Robust __LINE__ macro handling: Avoids false positive binary diffs
caused by the __LINE__ macro by introducing a fix-patch-lines script
(coming in a later patch) which injects #line directives into the
source .patch to preserve the original line numbers at compile time.
Note the end result of this subcommand is not yet functionally complete.
Livepatch needs some ELF magic which linkers don't like:
- Two relocation sections (.rela*, .klp.rela*) for the same text
section.
- Use of SHN_LIVEPATCH to mark livepatch symbols.
Unfortunately linkers tend to mangle such things. To work around that,
klp diff generates a linker-compliant intermediate binary which encodes
the relevant KLP section/reloc/symbol metadata.
After module linking, a klp post-link step (coming soon) will clean up
the mess and convert the linked .ko into a fully compliant livepatch
module.
Note this subcommand requires the diffed binaries to have been compiled
with -ffunction-sections and -fdata-sections, and processed with
'objtool --checksum'. Those constraints will be handled by a klp-build
script introduced in a later patch.
Without '-ffunction-sections -fdata-sections', reliable object diffing
would be infeasible due to toolchain limitations:
- For intra-file+intra-section references, the compiler might
occasionally generated hard-coded instruction offsets instead of
relocations.
- Section-symbol-based references can be ambiguous:
- Overlapping or zero-length symbols create ambiguity as to which
symbol is being referenced.
- A reference to the end of a symbol (e.g., checking array bounds)
can be misinterpreted as a reference to the next symbol, or vice
versa.
A potential future alternative to '-ffunction-sections -fdata-sections'
would be to introduce a toolchain option that forces symbol-based
(non-section) relocations.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The C implementation of STACK_FRAME_NON_STANDARD emits 8-byte entries,
whereas the asm version's entries are only 4 bytes.
Make them consistent by converting the asm version to 8-byte entries.
This is much easier than converting the C version to 4-bytes, which
would require awkwardly putting inline asm in a dummy function in order
to pass the 'func' pointer to the asm.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add annotations for
special section entries. This will enable objtool to determine the size
and location of the entries and to extract them when needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add an
ANNOTATE_DATA_SPECIAL macro which annotates special section entries so
that objtool can determine their size and location and extract them
when needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for using the objtool annotation macros in higher-level
objtool.h macros like UNWIND_HINT, move them to their own file.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, remove the arbitrary
'kmod_' prefix from __KBUILD_MODNAME and instead add it explicitly in
the __initcall_id() macro.
This change supports the standardization of "unique" symbol naming by
ensuring the non-unique portion of the name comes before the unique
part. That will enable objtool to properly correlate symbols across
builds.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, replace the custom
unique symbol name generation in ELFNOTE() with __UNIQUE_ID().
This standardizes the naming format for all "unique" symbols, which will
allow objtool to properly correlate them. Note this also removes the
"one ELF note per line" limitation.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Avoid underscore overload by changing:
__UNIQUE_ID___addressable_loops_per_jiffy_868
to the following:
__UNIQUE_ID_addressable_loops_per_jiffy_868
This matches the format used by other __UNIQUE_ID()-generated symbols
and improves readability for those who stare at ELF symbol table dumps.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In preparation for the objtool klp diff subcommand, add an underscore
between the name and the counter. This will make it possible for
objtool to distinguish between the non-unique and unique parts of the
symbol name so it can properly correlate the symbols.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Implement the missing cgroup_set_idle() callback that was marked as a
TODO. This allows BPF schedulers to be notified when a cgroup's idle
state changes, enabling them to adjust their scheduling behavior
accordingly.
The implementation follows the same pattern as other cgroup callbacks
like cgroup_set_weight() and cgroup_set_bandwidth(). It checks if the
BPF scheduler has implemented the callback and invokes it with the
appropriate parameters.
Fixes a spelling error in the cgroup_set_bandwidth() documentation.
tj: s/scx_cgroup_rwsem/scx_cgroup_ops_rwsem/ to fix build breakage.
Signed-off-by: zhidao su <soolaugust@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
