| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.20
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware: use a dedicated algorithm for AMD Navi
- designware: replace magic numbers with named constants
- designware: replace min_t() with min() to avoid u8 truncation
- designware: refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
|
|
The verifier assigns ids to scalar registers/stack slots when they are
linked through a mov or stack spill/fill instruction. These ids are
later used to propagate newly found bounds from one register to all
registers that share the same id. The verifier also compares the ids of
these registers in current state and cached state when making pruning
decisions.
When an ID becomes singular (i.e., only a single register or stack slot
has that ID), it can no longer participate in bounds propagation. During
comparisons between current and cached states for pruning decisions,
however, such stale IDs can prevent pruning of otherwise equivalent
states.
Find and clear all singular ids before caching a state in
is_state_visited(). struct bpf_idset which is currently unused has been
repurposed for this use case.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260203165102.2302462-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Some platforms require panic handling to execute on a specific CPU for
crash dump to work reliably. This can be due to firmware limitations,
interrupt routing constraints, or platform-specific requirements where
only a single CPU is able to safely enter the crash kernel.
Add the panic_force_cpu= kernel command-line parameter to redirect panic
execution to a designated CPU. When the parameter is provided, the CPU
that initially triggers panic forwards the panic context to the target CPU
via IPI, which then proceeds with the normal panic and kexec flow.
The IPI delivery is implemented as a weak function
(panic_smp_redirect_cpu) so architectures with NMI support can override it
for more reliable delivery.
If the specified CPU is invalid, offline, or a panic is already in
progress on another CPU, the redirection is skipped and panic continues on
the current CPU.
[pnina.feder@mobileye.com: fix unused variable warning]
Link: https://lkml.kernel.org/r/20260126122618.2967950-1-pnina.feder@mobileye.com
Link: https://lkml.kernel.org/r/20260122102457.1154599-1-pnina.feder@mobileye.com
Signed-off-by: Pnina Feder <pnina.feder@mobileye.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new field async_depth to request_queue and related APIs, this is
currently not used, following patches will convert elevators to use
this instead of internal async_depth.
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This value represents the number of requests for elevator tags, or drivers
tags if elevator is none. The max value for elevator tags is 2048, and
in drivers at most 16 bits is used for tag.
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When cpuset isolated partitions get updated, unbound kthreads get
indifferently affine to all non isolated CPUs, regardless of their
individual affinity preferences.
For example kswapd is a per-node kthread that prefers to be affine to
the node it refers to. Whenever an isolated partition is created,
updated or deleted, kswapd's node affinity is going to be broken if any
CPU in the related node is not isolated because kswapd will be affine
globally.
Fix this with letting the consolidated kthread managed affinity code do
the affinity update on behalf of cpuset.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
|
|
Tasks that have all their allowed CPUs offline don't want their affinity
to fallback on either nohz_full CPUs or on domain isolated CPUs. And
since nohz_full implies domain isolation, checking the latter is enough
to verify both.
Therefore exclude domain isolation from fallback task affinity.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
|
|
It doesn't make sense to use nohz_full without also isolating the
related CPUs from the domain topology, either through the use of
isolcpus= or cpuset isolated partitions.
And now HK_TYPE_DOMAIN includes all kinds of domain isolated CPUs.
This means that HK_TYPE_DOMAIN should always be a subset of
HK_TYPE_KERNEL_NOISE (of which HK_TYPE_TICK is only an alias).
Therefore if a CPU is not HK_TYPE_DOMAIN, it shouldn't be
HK_TYPE_KERNEL_NOISE either. Testing the former is then enough.
Simplify cpu_is_isolated() accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
|
|
The set of cpuset isolated CPUs is now included in HK_TYPE_DOMAIN
housekeeping cpumask. There is no usecase left interested in just
checking what is isolated by cpuset and not by the isolcpus= kernel
boot parameter.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
|
|
Until now, cpuset would propagate isolated partition changes to
workqueues so that unbound workers get properly reaffined.
Since housekeeping now centralizes, synchronize and propagates isolation
cpumask changes, perform the work from that subsystem for consolidation
and consistency purposes.
For simplification purpose, the target function is adapted to take the
new housekeeping mask instead of the isolated mask.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
|
|
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against PCI probe works and make sure that no
asynchronous probing is still pending or executing on a newly isolated
CPU, the housekeeping subsystem must flush the PCI probe works.
However the PCI probe works can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a PCI probe-specific pool and provide and use
the appropriate flushing API.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-pci@vger.kernel.org
|
|
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime.
In order to synchronize against vmstat workqueue to make sure
that no asynchronous vmstat work is still pending or executing on a
newly made isolated CPU, the housekeeping susbsystem must flush the
vmstat workqueues.
This involves flushing the whole mm_percpu_wq workqueue, shared with
LRU drain, introducing here a welcome side effect.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-mm@kvack.org
|
|
The HK_TYPE_DOMAIN housekeeping cpumask is now modifiable at runtime. In
order to synchronize against memcg workqueue to make sure that no
asynchronous draining is still pending or executing on a newly made
isolated CPU, the housekeeping susbsystem must flush the memcg
workqueues.
However the memcg workqueues can't be flushed easily since they are
queued to the main per-CPU workqueue pool.
Solve this with creating a memcg specific pool and provide and use the
appropriate flushing API.
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
Cc: linux-mm@kvack.org
|
|
Until now, HK_TYPE_DOMAIN used to only include boot defined isolated
CPUs passed through isolcpus= boot option. Users interested in also
knowing the runtime defined isolated CPUs through cpuset must use
different APIs: cpuset_cpu_is_isolated(), cpu_is_isolated(), etc...
There are many drawbacks to that approach:
1) Most interested subsystems want to know about all isolated CPUs, not
just those defined on boot time.
2) cpuset_cpu_is_isolated() / cpu_is_isolated() are not synchronized with
concurrent cpuset changes.
3) Further cpuset modifications are not propagated to subsystems
Solve 1) and 2) and centralize all isolated CPUs within the
HK_TYPE_DOMAIN housekeeping cpumask.
Subsystems can rely on RCU to synchronize against concurrent changes.
The propagation mentioned in 3) will be handled in further patches.
[Chen Ridong: Fix cpu_hotplug_lock deadlock and use correct static
branch API]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
|
|
cpuset modifies partitions, including isolated, while holding the cpuset
mutex.
This means that holding the cpuset mutex is safe to synchronize against
housekeeping cpumask changes.
Provide a lockdep check to validate that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
Cc: cgroups@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
|
|
cpuset modifies partitions, including isolated, while holding the cpu
hotplug lock read-held.
This means that write-holding the CPU hotplug lock is safe to
synchronize against housekeeping cpumask changes.
Provide a lockdep check to validate that.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-kernel@vger.kernel.org
|
|
HK_TYPE_DOMAIN will soon integrate not only boot defined isolcpus= CPUs
but also cpuset isolated partitions.
Housekeeping still needs a way to record what was initially passed
to isolcpus= in order to keep these CPUs isolated after a cpuset
isolated partition is modified or destroyed while containing some of
them.
Create a new HK_TYPE_DOMAIN_BOOT to keep track of those.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Crivellari <marco.crivellari@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Waiman Long <longman@redhat.com>
|
|
Detect spurious retransmission of a previously sent ACK carrying the
AccECN option after the second retransmission. Since this might be caused
by the middlebox dropping ACK with options it does not recognize, disable
the sending of the AccECN option in all subsequent ACKs. This patch
follows Section 3.2.3.2.2 of AccECN spec (RFC9768), and a new field
(accecn_opt_sent_w_dsack) is added to indicate that an AccECN option was
sent with duplicate SACK info.
Also, a new AccECN option sending mode is added to tcp_ecn_option sysctl:
(TCP_ECN_OPTION_PERSIST), which ignores the AccECN fallback policy and
persistently sends AccECN option once it fits into TCP option space.
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-13-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add newly acked pkts EWMA. When ACK thinning occurs, select
between safer and unsafe cep delta in AccECN processing based
on it. If the packets ACKed per ACK tends to be large, don't
conservatively assume ACE field overflow.
This patch uses the existing 2-byte holes in the rx group for new
u16 variables withtout creating more holes. Below are the pahole
outcomes before and after this patch:
[BEFORE THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
/* XXX 4 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 177 */
}
[AFTER THIS PATCH]
struct tcp_sock {
[...]
u32 delivered_ecn_bytes[3]; /* 2744 12 */
u16 pkts_acked_ewma; /* 2756 2 */
/* XXX 2 bytes hole, try to pack */
[...]
__cacheline_group_end__tcp_sock_write_rx[0]; /* 2816 0 */
[...]
/* size: 3264, cachelines: 51, members: 178 */
}
Signed-off-by: Ilpo Järvinen <ij@kernel.org>
Co-developed-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260131222515.8485-2-chia-yu.chang@nokia-bell-labs.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Last user dsa_loop has been migrated away from modalias-based matching,
so we can remove this feature now. It was the only user of MDIO_NAME_SIZE,
so remove also this constant.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ce1c6df0-4785-4b28-8322-32dc6bceea18@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The struct revocable handle stores the SRCU read-side index (idx) for
the duration of a resource access. If multiple threads share the same
struct revocable instance, they race on writing to the idx field,
corrupting the SRCU state and potentially causing unsafe unlocks.
Refactor the API to replace revocable_alloc()/revocable_free() with
revocable_init()/revocable_deinit(). This change requires the caller
to provide the storage for struct revocable.
By moving storage ownership to the caller, the API ensures that
concurrent users maintain their own private idx storage, eliminating
the race condition.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/20260124170535.11756-4-johan@kernel.org/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-4-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two race conditions when allocating a revocable instance:
1. After a struct revocable_provider is revoked, the caller might still
hold a dangling pointer to it. A subsequent call to
revocable_alloc() can trigger a use-after-free.
2. If revocable_provider_release() runs concurrently with
revocable_alloc(), the memory of struct revocable_provider can be
accessed during or after kfree().
To fix these:
- Manage the lifetime of struct revocable_provider using RCU. Annotate
pointers to it with __rcu and use kfree_rcu() for deallocation.
- Update revocable_alloc() to safely acquire a reference using RCU
primitives.
- Update revocable_provider_revoke() to take a double pointer (`**rp`).
It atomically NULLs out the caller's pointer before starting
revocation. This prevents the caller from holding a dangling pointer.
- Drop devm_revocable_provider_alloc(). The devm-managed model cannot
support the required double-pointer semantic for safe pointer nulling.
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/all/aXdy-b3GOJkzGqYo@hovoldconsulting.com/
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260129143733.45618-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update to avoid conflicts with /urgent patches.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
|
|
Make sure sub-command of lightbar command starts with a 8bit
parameter to ensure alignment.
Fixes: 9600b8bdbfe4 ("platform/chrome: lightbar: Add support for large sequence")
Signed-off-by: Gwendal Grignou <gwendal@google.com>
Link: https://lore.kernel.org/r/20260202100621.3608437-1-gwendal@google.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
|
|
All inet6_cork users also use one inet_cork_full.
Reduce number of parameters and increase data locality.
This saves ~275 bytes of code on x86_64.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260130210303.3888261-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the following check, to detect bugs sooner for CONFIG_DEBUG_NET=y
builds.
DEBUG_NET_WARN_ON_ONCE(skb->data < skb->head);
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130160253.2936789-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a struct fsverity_info to the verification and readahead helpers,
and push the lookup into the callers. Right now this is a very dumb
almost mechanic move that open codes a lot of fsverity_info_addr() calls
in the file systems. The subsequent patches will clean this up.
This prepares for reducing the number of fsverity_info lookups, which
will allow to amortize them better when using a more expensive lookup
method.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260202060754.270269-7-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Currently all reads of the fsverity hashes are kicked off from the data
I/O completion handler, leading to needlessly dependent I/O. This is
worked around a bit by performing readahead on the level 0 nodes, but
still fairly ineffective.
Switch to a model where the ->read_folio and ->readahead methods instead
kick off explicit readahead of the fsverity hashed so they are usually
available at I/O completion time.
For 64k sequential reads on my test VM this improves read performance
from 2.4GB/s - 2.6GB/s to 3.5GB/s - 3.9GB/s. The improvements for
random reads are likely to be even bigger.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Link: https://lore.kernel.org/r/20260202060754.270269-5-hch@lst.de
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
There are no users, drop it for good.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
|
|
Merge series from Chris Morgan <macroalpha82@gmail.com>:
Add support for the Anbernic RG-DS Speaker Amplifiers. The Anbernic
RG-DS uses two AW87391 ICs at 0x58 and 0x5B on i2c2. However, the
manufacturer did not provide a firmware file, only a sequence of
register writes to each device to enable and disable them.
Add support for this *specific* configuration in the AW87390 driver.
Since we are relying on a device specific sequence I am using a
device specific compatible string. This driver does not currently
support the aw87391 for any other device as I have none to test
with valid firmware. Attempts to create firmware with the AwinicSCPv4
have not been successful.
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
This series is adding support for SPI controllers and peripherals that
have multiple SPI data lanes (data lanes being independent sets of
SDI/SDO lines, each with their own serializer/deserializer).
This series covers this specific use case:
+--------------+ +---------+
| SPI | | SPI |
| Controller | | ADC |
| | | |
| CS0 |--->| CS |
| SCLK |--->| SCLK |
| SDO |--->| SDI |
| SDI0 |<---| SDOA |
| SDI1 |<---| SDOB |
| SDI2 |<---| SDOC |
| SDI3 |<---| SDOD |
+--------------+ +--------+
The ADC is a simultaneous sampling ADC that can convert 4 samples at the
same time. It has 4 data output lines (SDOA-D) that each contain the
data of one of the 4 channels. So it requires a SPI controller with 4
separate deserializers in order to receive all of the information at the
same time.
This should also work for the use case in [1] as well. (Some of the
patches in this series were already submitted there). In that case the
SPI controller is used kind of like it is two separate SPI controllers,
each with its own chip select, clock, and data lines.
[1]: https://lore.kernel.org/linux-spi/20250616220054.3968946-1-sean.anderson@linux.dev/
The DT bindings are a fairly straight-forward mapping of which pins on
the peripheral are connected to which pins on the controller. The SPI
core code parses this and makes the information available to drivers.
When a peripheral driver sees that multiple data lanes are wired up, it
can chose to use them when sending messages.
The SPI message API is a bit higher-level than just specifying the
number of data lines for a SPI transfer though. I did some research on
other SPI controllers that have this feature. They tend to be the kind
meant for connecting to two flash memory chips at the same time but can
be used more generically as well. They generally have the option to
either use one lane at a time (Sean's use case), or can mirror the same
data on multiple lanes (no users of this yet) or can perform striping
of a single data FIFO/DMA stream to/from the two lanes (our use case).
For now, the API assumes that if you want to do mirror/striping, then
you want to use all available data lanes. Otherwise, it just uses the
first data lane for "normal" SPI transfers.
|
|
There are some configurations in which lockdep_assert_rcu_helper() ends up
not being inlined, for some reason. This leads to a link failure because
now the caller tries to pass a nonexistant __ctx_lock_RCU structure:
ld: lib/test_context-analysis.o: in function `test_rcu_assert_variants':
test_context-analysis.c:(.text+0x275c): undefined reference to `RCU'
ld: test_context-analysis.c:(.text+0x276c): undefined reference to `RCU_BH'
ld: test_context-analysis.c:(.text+0x2774): undefined reference to `RCU_SCHED'
I saw this in one out of many 32-bit arm builds using gcc-15.2, but
it probably happens in others as well.
Mark this function as __always_inline to fix the build.
Fixes: fe00f6e84621 ("rcu: Support Clang's context analysis")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://patch.msgid.link/20260202095507.1237440-1-arnd@kernel.org
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for the 6.20/7.0 cycle.
Slightly messier than normal unfortunately due to some conflicts
and build config bugs related to I3C drivers.
One last minute Kconfig fix right at the top after a linux-next report.
I've simplified the Kconfig and made it match other instances in the kernel
so that should be safe enough despite short soak time in front of build bots.
Merge of an immutable branch from I3C to get some stubs that were missing
and caused build issues with dual I2C / I3C drivers. This also brought in a
drop of some deprecated interfaces so there is also one patch to update a
new driver to not use those.
We are having another go at using cleanup.h magic with the IIO mode claim
functions after backing out last try at this. This time we have wrappers
around the new ACQUIRE() and ACQUIRE_ERR() macros.
Having been burnt once, we will be taking it a bit more slowly this time
wrt to wide adoption of these! Thanks in particular to Kurt for taking
on this core IIO work.
New Device Support
==================
adi,ad18113
- New driver to support the AD18113 amplifier - an interesting device due
to the external bypass paths where we need to describe what gain those
paths have in DT. Longer term it will be interesting to see if this
simplistic description is enough for real deployments.
adi,ad4062
- New driver for the AD4060 and AD4052 SAR ADCs including trigger, event
and GPIO controller support. Follow up patch replaced use of some
deprecated I3C interfaces prior to the I3C immutable branch merge as
that includes dropping them.
adi,ad4134
- New driver for the AD4134 24bit 4 channel simultaneous sampling ADC.
adi,ad7768-1,
- Add support for the ADAQ767-1, ADAQ7768-1 and ADAQ7769-1 ADCs after some
rework to enable the driver to support multiple device types.
adi,ad9467
- Add support for the similar ad9211 ADC to this existing driver.
- Make the selection of 2s comp mode explicit for normal operation and
switch to offset binary when entering calibration mode.
honeywell,abp2
- New driver to support this huge family (100+) of board mount pressure and
temperature sensors.
maxim,max22007
- New drier for this 4 channel DAC.
memsic,mmc5633
- New driver for this I2C/I3C magnetometer. Follow on patches fixed up
issues related to single driver supporting both bus types.
microchip,mcp747feb02
- New driver for the Microchip MCP47F(E/V)B(0/1/2)1,
MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8
buffered voltage output DACs.
nxp,sar-adc
- New driver support ADCs found on s32g2 and s32g3 platforms.
ti,ads1018
- New drier for the ADS1018 and ADS1118 SPI ADCs.
ti,ads131m02
- New driver supporting ADS131M(02/03/04/06/08)24-bit simultaneous sampling
ADCs.
Features
========
iio-core
- New IIO_DEV_ACQUIRE_DIRECT_MODE() / IIO_DEV_ACQUIRE_FAILED() +
equivalents for the much rarer case where the mode needs pinning
whether or not it is in direct mode. These use the ACQUIRE()
/ ACQUIRE_ERR() infrastructure underneath to provide both simple
checks on whether we got the requested mode and to provide scope
based release. Applied in a few initial drivers.
adi,ad9467
- Support calibbias control
adi,adf4377
- Add support to act as a clock provider.
adi,adxl380
- Support low power 1KHz sampling frequency mode. Required rework of
how events and filters were configured, plus applying of constraints
when in this mode.
rf-digital,rfd77402
- Add interrupt support as alternative to polling for completion.
st,lsm6dsx
- Tap event detection (after considerable driver rework)
Cleanup and Minor Fixes
=======================
More minor cleanup such as typos, white space etc not called out except
where they were applied to a lot of drivers.
Various drivers.
- Use of dev_err_probe() to cleanup error handling.
- Introduce local struct device and struct device_node variables to
reduce duplication of getting them from containing structs.
- Ensure uses of iio_trigger_generic_data_rdy_poll() set IRQF_NO_THREAD
as that function calls non threaded child interrupt handlers.
- Replace IRQF_ONESHOT in not thread interrupt handlers with
IRQF_NO_THREAD to ensure they run as intended. Drop one unnecessary case.
iio-sw-device/trigger.
- Constify configs_group_operations structures.
iio-buffer-dma / buffer-dma-engine
- Use lockdep_assert_held() to replace WARN_ON() to check lock is
correctly held.
- Make use of cleanup.h magic to simplify various code paths.
- Make iio_dma_buffer_init() return void rather than always success.
adi,ad7766
- Replace custom interrupt handler with iio_trigger_generic_data_rdy_poll()
adi,ad9832
- Drop legacy platform_data support.
adi,ade9000
- Add a maintainer entry.
adi,adt7316
- Move to EXPORT_GPL_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr() so the compiler
can cleanly drop unused pm structures and callbacks.
adi,adxl345
- Relax build constraint vs the driver that is in input so both may be
built as modules and selection made at runtime.
adi,adxl380
- Make sure we don't read tail entries in the hardware fifo if a partial
new scan has been written.
- Move to a single larger regmap_noinc_read() to read the hardware fifo.
aspeed,ast2600
- Add missing interrupts property to DT binding.
bosch,bmi270_i2c
- Add missing MODULE_DEVICE_TABLE() macros so auto probing of modules can
work.
bosch,smi330
- Drop duplicate assignment of IIO_TYPE in smi330_read_avail()
- Use new common field_get() and field_prep() helpers to replace local
version.
honeywell,mprls0025pa
Fixes delayed to merge window as late in cycle and we didn't want to delay
the rest of the series.
- Allow Kconfig selection of specific bus sub-drivers rather than tying that
to the buses themselves being supported.
- Zero spi_transfer structure to avoid chance of unintentionally set fields
effecting transfer.
- Fix a potential timing violation wrt to the chip select to first clock
edge timing.
- As recent driver, take risk inherent in dropping interrupt direction from
driver as that should be set by firmware.
- Fix wrong reported number of data bits for channel.
- Fix a pressure channel calculation bug.
- Rework to allow embedding the tx buffer in the iio_priv() structure rather
than requiring separate allocation.
- Move the buffer clearing to the shared core bringing it into affect for
SPI as well as I2C.
- Stricter checks for status byte.
- Greatly simplify the measurement sequence.
- Add a copyright entry to reflect Petre's continued work on this driver.
intersil,isl29018
- Switch from spritnf to sysfs_emit_at() to make it clear overflow can't
occur.
invensense,icm42600
- Allow sysfs access to temperature when buffered capture in use as it
does not impact other sensor data paths.
invensense,itg3200
- Check unused return value in read_raw() callback.
men,z188
- Drop now duplicated module alias.
rf-digital,rfd77402
- Add DT binding doc and explicit of_device_id table.
- Poll for timeout with times as on datasheet, then replace opencoded
version with read_poll_timeout().
sensiron,scd4x
- Add missing timestamp channel. The code to push it to the buffer was there
but there was no way to turn it on.
vti,sca3000
- Fix resource leak if iio_device_register() fails.
* tag 'iio-for-7.0a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (144 commits)
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
iio: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: Use IRQF_NO_THREAD
iio: dac: Add MAX22007 DAC driver support
dt-bindings: iio: dac: Add max22007
...
|
|
Add a new multi_lane_mode field to struct spi_transfer to allow
peripherals that support multiple SPI lanes to be used with a single
SPI controller.
This requires both the peripheral and the controller to have multiple
serializers connected to separate data lanes. It could also be used with
a single controller and multiple peripherals that are functioning as a
single logical device (similar to parallel memories).
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-4-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for SPI controllers with multiple physical SPI data lanes.
(A data lane in this context means lines connected to a serializer, so a
controller with two data lanes would have two serializers in a single
controller).
This is common in the type of controller that can be used with parallel
flash memories, but can be used for general purpose SPI as well.
To indicate support, a controller just needs to set ctlr->num_data_lanes
to something greater than 1. Peripherals indicate which lane they are
connected to via device tree (ACPI support can be added if needed).
The spi-{tx,rx}-bus-width DT properties can now be arrays. The length of
the array indicates the number of data lanes, and each element indicates
the bus width of that lane. For now, we restrict all lanes to have the
same bus width to keep things simple. Support for an optional controller
lane mapping property is also implemented.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20260123-spi-add-multi-bus-support-v6-3-12af183c06eb@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce support in AP mode for parsing of the Operating Mode Notification
frame sent by the client to enable/disable MLO eMLSR or eMLMR if supported
by both the AP and the client.
Add drv_set_eml_op_mode mac80211 callback in order to configure underlay
driver with eMLSR/eMLMR info.
Tested-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260129-mac80211-emlsr-v4-1-14bdadf57380@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This is based on Draft P802.11bn_D1.2, but that's still very
incomplete, so don't handle a number of things and make some
local decisions such as using 40 bits for MAC capabilities
and 8 bits for PHY capabilities.
Link: https://patch.msgid.link/20260130164259.b28c9456ff94.I5b11fb0345a933bf497fd802aecc72932d58dd68@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
After the split of ieee80211.h some include guard comments weren't
updated, update them to their new file names.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20260130005319.70019-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fix from Ingo Molnar:
"Fix a race in the user-callchains code"
* tag 'perf-urgent-2026-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: sched: Fix perf crash with new is_user_task() helper
|
|
Using a threaded interrupt without a dedicated primary handler mandates
the IRQF_ONESHOT flag to mask the interrupt source while the threaded
handler is active. Otherwise the interrupt can fire again before the
threaded handler had a chance to run.
Mark explained that this should not happen with this hardware since it
is a slow irqchip which is behind an I2C/ SPI bus but the IRQ-core will
refuse to accept such a handler.
Set IRQF_ONESHOT so the interrupt source is masked until the secondary
handler is done.
Fixes: 1c6c69525b40e ("genirq: Reject bogus threaded irq requests")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-16-bigeasy@linutronix.de
|
|
The flag IRQF_COND_ONESHOT was already force-added to request_irq() because
the ACPI SCI interrupt handler is using the IRQF_ONESHOT flag which breaks
all shared handlers.
devm_request_irq() needs the same change since some users, such as
int0002_vgpio, are using this function instead.
Add IRQF_COND_ONESHOT to the flags passed to devm_request_irq().
Fixes: c37927a203fa2 ("genirq: Set IRQF_COND_ONESHOT in request_irq()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128095540.863589-2-bigeasy@linutronix.de
|
|
The current cgroup subsystem limit of 16 is insufficient, as the number of
existing subsystems has already reached this limit. When adding a new
subsystem that is not yet in the mainline kernel, building with
`make allmodconfig` requires first bypassing the
`BUILD_BUG_ON(CGROUP_SUBSYS_COUNT > 16)` restriction to allow compilation
to succeed. However, the kernel still fails to boot afterward.
This patch increases the maximum number of supported cgroup subsystems from
16 to 32, providing enough room for future subsystem additions.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The IPC sysctls implement the ctl_table_root::permissions hook and they
override the file access mode based on the CAP_CHECKPOINT_RESTORE
capability, which is being checked regardless of whether any access is
actually denied or not, so if an LSM denies the capability, an audit
record may be logged even when access is in fact granted.
It wouldn't be viable to restructure the sysctl permission logic to only
check the capability when the access would be actually denied if it's not
granted. Thus, do the same as in net_ctl_permissions() (net/sysctl_net.c)
- switch from ns_capable() to ns_capable_noaudit(), so that the check
never emits an audit record.
Link: https://lkml.kernel.org/r/20260122141303.241133-1-omosnace@redhat.com
Fixes: 0889f44e2810 ("ipc: Check permissions for checkpoint_restart sysctls at open time")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Acked-by: Serge Hallyn <serge@hallyn.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Problem
=======
Commit 658eb5ab916d ("delayacct: add delay max to record delay peak")
introduced the delay max for getdelays, which records abnormal latency
peaks and helps us understand the magnitude of such delays. However, the
peak latency value alone is insufficient for effective root cause
analysis. Without the precise timestamp of when the peak occurred, we
still lack the critical context needed to correlate it with other system
events.
Solution
========
To address this, we need to additionally record a precise timestamp when
the maximum latency occurs. By correlating this timestamp with system
logs and monitoring metrics, we can identify processes with abnormal
resource usage at the same moment, which can help us to pinpoint root
causes.
Use Case
========
bash-4.4# ./getdelays -d -t 227
print delayacct stats ON
TGID 227
CPU count real total virtual total delay total delay average delay max delay min delay max timestamp
46 188000000 192348334 4098012 0.089ms 0.429260ms 0.051205ms 2026-01-15T15:06:58
IO count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
SWAP count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
RECLAIM count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
THRAS HING count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
COMPACT count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
WPCOPY count delay total delay average delay max delay min delay max timestamp
182 19413338 0.107ms 0.547353ms 0.022462ms 2026-01-15T15:05:24
IRQ count delay total delay average delay max delay min delay max timestamp
0 0 0.000ms 0.000000ms 0.000000ms N/A
Link: https://lkml.kernel.org/r/20260119100241520gWubW8-5QfhSf9gjqcc_E@zte.com.cn
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Tracing is a half of the kernel.h in terms of LOCs, although it's a
self-consistent part. It is intended for quick debugging purposes and
isn't used by the normal tracing utilities.
Move it to a separate header. If someone needs to just throw a
trace_printk() in their driver, they will not have to pull all the heavy
tracing machinery.
This is a pure move.
Link: https://lkml.kernel.org/r/20260116042510.241009-7-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The __trace_puts() function takes a string pointer and the size of the
string itself. All users currently simply pass in the strlen() of the
string it is also passing in. There's no reason to pass in the size.
Instead have the __trace_puts() function do the strlen() within the
function itself.
This fixes a header recursion issue where using strlen() in the macro
calling __trace_puts() requires adding #include <linux/string.h> in order
to use strlen(). Removing the use of strlen() from the header fixes the
recursion issue.
Link: https://lore.kernel.org/all/aUN8Hm377C5A0ILX@yury/
Link: https://lkml.kernel.org/r/20260116042510.241009-6-ynorov@nvidia.com
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In preparation for decoupling linux/instruction_pointer.h and
linux/kernel.h, include instruction_pointer.h explicitly where needed.
Link: https://lkml.kernel.org/r/20260116042510.241009-5-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The macro is related to sysfs, but is defined in kernel.h. Move it to the
proper header, and unload the generic kernel.h.
Now that the macro is removed from kernel.h, linux/moduleparam.h is
decoupled, and kernel.h inclusion can be removed.
Link: https://lkml.kernel.org/r/20260116042510.241009-4-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following patch drops moduleparam.h dependency on kernel.h. In
preparation to it, list all the required headers explicitly.
Link: https://lkml.kernel.org/r/20260116042510.241009-3-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Suggested-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Aaron Tomlin <atomlin@atomlin.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Unload linux/kernel.h", v5.
kernel.h hosts declarations that can be placed better. This series
decouples kernel.h with some explicit and implicit dependencies; also,
moves tracing functionality to a new independent header.
This patch (of 6):
The macro was introduced in 1994, v1.0.4, for stacks protection. Since
that, people found better ways to protect stacks, and now the macro is
only used by i915 selftests. Move it to a local header and drop from the
kernel.h.
Link: https://lkml.kernel.org/r/20260116042510.241009-1-ynorov@nvidia.com
Link: https://lkml.kernel.org/r/20260116042510.241009-2-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
