| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|
|
The stmmac implementation used by NXP for the i.MX8MP SoC is subject to
errata ERR050694. According to this errata, when no preamble byte is
transferred before the SFD from the PHY to the MAC, the MAC will discard
the frame.
Setting the PHY_F_KEEP_PREAMBLE_BEFORE_SFD flag instructs PHYs that
support it to keep the preamble byte before the SFD. This ensures that
the MAC successfully receives frames.
As this is an issue in the MAC implementation, only enable the flag for
the i.MX8MP SoC where the errata applies but not for other SoCs using a
working stmmac implementation.
The exact wording of the errata ERR050694 from NXP:
The IEEE 802.3 standard states that, in MII/GMII modes, the byte
preceding the SFD (0xD5), SMD-S (0xE6,0x4C, 0x7F, or 0xB3), or SMD-C
(0x61, 0x52, 0x9E, or 0x2A) byte can be a non-PREAMBLE byte or there can
be no preceding preamble byte. The MAC receiver must successfully
receive a packet without any preamble(0x55) byte preceding the SFD,
SMD-S, or SMD-C byte.
However due to the defect, in configurations where frame preemption is
enabled, when preamble byte does not precede the SFD, SMD-S, or SMD-C
byte, the received packet is discarded by the MAC receiver. This is
because, the start-of-packet detection logic of the MAC receiver
incorrectly checks for a preamble byte.
NXP refers to IEEE 802.3 where in clause 35.2.3.2.2 Receive case (GMII)
they show two tables one where the preamble is preceding the SFD and one
where it is not. The text says:
The operation of 1000 Mb/s PHYs can result in shrinkage of the preamble
between transmission at the source GMII and reception at the destination
GMII. Table 35-3 depicts the case where no preamble bytes are conveyed
across the GMII. This case may not be possible with a specific PHY, but
illustrates the minimum preamble with which MAC shall be able to
operate. Table 35-4 depicts the case where the entire preamble is
conveyed across the GMII.
This workaround was tested on a Verdin iMX8MP by enforcing 10 MBit/s:
ethtool -s end0 speed 10
Without keeping the preamble, no packet were received. With keeping the
preamble, everything worked as expected.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260120203905.23805-4-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new flag, PHY_F_KEEP_PREAMBLE_BEFORE_SFD, to indicate that the PHY
shall not remove the preamble before the SFD if it supports it. MACs
that do not support receiving frames without a preamble can set this
flag.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260120203905.23805-2-eichest@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The VF ID range of an SR-IOV device is [0, num_VFs - 1].
pci_ide_stream_alloc() mistakenly uses num_VFs to represent the last ID.
Fix that off by one error to stay in bounds of the range.
Fixes: 1e4d2ff3ae45 ("PCI/IDE: Add IDE establishment helpers")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://patch.msgid.link/20260114111455.550984-1-ming.li@zohomail.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The proposed ABI failed to account for multiple host bridges with the same
stream name. The fix needs to namespace streams or otherwise link back to
the host bridge, but a change like that is too big for a fix. Given this
ABI never saw a released kernel, delete it for now and bring it back later
with this issue addressed.
Reported-by: Xu Yilun <yilun.xu@linux.intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: http://lore.kernel.org/20251223085601.2607455-1-yilun.xu@linux.intel.com
Link: http://patch.msgid.link/6972c872acbb9_1d3310035@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Internal PCIe errors are not enabled by default during initialization
because their behavior is too device-specific and there is no standard way
to reason about them. However, for CXL an internal error is the standard
mechanism for conveying CXL protocol errors.
Export pci_aer_unmask_internal_errors() for CXL, but make it clear that
they are only meant for CXL and the status quo for leaving them masked for
PCIe in general remains.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260114182055.46029-10-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
CXL is a protocol that runs on top of PCIe electricals. Its error model
also runs on top of the PCIe AER error model by standardizing "internal"
errors as "CXL" errors. Linux has historically ignored internal errors.
CXL protocol error handling is then a task of enhancing the PCIe AER
core to understand that PCIe ports (upstream and downstream) and
endpoints may throw internal errors that represent standard CXL protocol
errors.
The proposed method to make that determination is to teach 'struct
pci_dev' to cache when its link has trained the CXL.mem and/or CXL.cache
protocols and then treat all internal errors as CXL errors. A design
goal is to not burden the PCIe AER core with CXL knowledge beyond just
enough to forward error notifications to the CXL RAS core. The forwarded
notification looks up a 'struct cxl_port' or 'struct cxl_dport'
companion device to the PCI device.
Introduce set_pcie_cxl() with logic checking for CXL.mem or CXL.cache
status in the CXL Flex Bus DVSEC status register. The CXL Flex Bus DVSEC
presence is used because it is required for all the CXL PCIe devices.[1]
[1] CXL 3.1 Spec, 8.1.1 PCIe Designated Vendor-Specific Extended
Capability (DVSEC) ID Assignment, Table 8-2
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ben Cheatham <benjamin.cheatham@amd.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260114182055.46029-4-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add macros to convert between ratio and percentage related units,
including percent (1/100), permille (1/1,000), permyriad (1/10,000,
also equivalent to one Basis point) and per cent mille (1/100,000).
Those are Used for precise fractional calculations in engineering,
finance, and measurement applications.
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add guard classes for iio_device_claim_*() conditional locks. This will
aid drivers write safer and cleaner code when dealing with some common
patterns.
These classes are not meant to be used directly by drivers (hence the
__priv__ prefix). Instead, documented wrapper macros are provided to
enforce the use of ACQUIRE() or guard() semantics and avoid the
problematic scoped guard.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Implement iio_device_claim_buffer_mode() fully inline with the use of
__iio_dev_mode_lock(), which takes care of sparse annotations.
To completely match iio_device_claim_direct() semantics, we need to
also change iio_device_claim_buffer_mode() return semantics to usual
true/false conditional lock semantics.
Additionally, to avoid silently breaking out-of-tree drivers, rename
iio_device_claim_buffer_mode() to iio_device_claim_try_buffer_mode().
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In order to eventually unify the locking API, implement
iio_device_claim_direct() fully inline, with the use of
__iio_dev_mode_lock(), which takes care of sparse annotations.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add unconditional wrappers around the internal IIO mode lock.
As mentioned in the documentation, this is not meant to be used by
drivers, instead this will aid in the eventual addition of cleanup
classes around conditional locks.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Needed for some stubs to prevent build issues if !CONFIG_I3C
|
|
devres_for_each_res() is only used by .../firmware_loader/main.c, which
already includes base.h.
The usage of devres_for_each_res() by code outside of driver-core is
questionable, hence move it to base.h.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260119162920.77189-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The AXP717 has some extra registers related to type-C CC pin
negotiation. They were missing from the original submission.
Add them for completeness.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251225080241.3153453-1-wens@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The TPS65214 PMIC variant has a LOCK_REG register that prevents writes to
nearly all registers when locked. Unlock the registers at probe time and
leave them unlocked permanently.
This approach is justified because:
- Register locking is very uncommon in typical system operation
- No code path is expected to lock the registers during runtime
- Adding a custom regmap write function would add overhead to every
register write, including voltage changes triggered by CPU OPP
transitions from the cpufreq governor which could happen quite
frequently
Cc: stable@vger.kernel.org
Fixes: 7947219ab1a2d ("mfd: tps65219: Add support for TI TPS65214 PMIC")
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20251218-fix_tps65219-v5-1-8bb511417f3a@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
As there are some registers missing which are required for future charger
extensions, add them.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/20251207085024.7375-1-andreas@kemnade.info
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
tps6105x_mode
Fix spelling of an enum to fix a kernel-doc warning.
Fix kernel-doc of struct tps6105x to prevent kernel-doc warnings.
Warning: include/linux/mfd/tps6105x.h:68 Enum value 'TPS6105X_MODE_TORCH'
not described in enum 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:68 Excess enum value
'%TPS61905X_MODE_TORCH' description in 'tps6105x_mode'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'pdata'
not described in 'tps6105x'
Warning: include/linux/mfd/tps6105x.h:93 struct member 'client'
not described in 'tps6105x'
Fixes: 798a8eee44da ("mfd: Add a core driver for TI TPS61050/TPS61052 chips v2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251125022750.3165569-1-rdunlap@infradead.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
'ib-mfd-regulator-6.20' and 'ib-mfd-rtc-6.20' into ibs-for-mfd-merged
|
|
This reverts commit 2b69987be575 ("sched: Add
task_struct->faults_disabled_mapping"), which added this field without
review or maintainer signoff. With bcachefs removed from the
tree it is also unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260122085223.487092-1-hch@lst.de
|
|
Provide the actual decision function, which decides whether a time slice
extension is granted in the exit to user mode path when NEED_RESCHED is
evaluated.
The decision is made in two stages. First an inline quick check to avoid
going into the actual decision function. This checks whether:
#1 the functionality is enabled
#2 the exit is a return from interrupt to user mode
#3 any TIF bit, which causes extra work is set. That includes TIF_RSEQ,
which means the task was already scheduled out.
The slow path, which implements the actual user space ABI, is invoked
when:
A) #1 is true, #2 is true and #3 is false
It checks whether user space requested a slice extension by setting
the request bit in the rseq slice_ctrl field. If so, it grants the
extension and stores the slice expiry time, so that the actual exit
code can double check whether the slice is already exhausted before
going back.
B) #1 - #3 are true _and_ a slice extension was granted in a previous
loop iteration
In this case the grant is revoked.
In case that the user space access faults or invalid state is detected, the
task is terminated with SIGSEGV.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155709.195303303@linutronix.de
|
|
When a time slice extension was granted in the need_resched() check on exit
to user space, the task can still be scheduled out in one of the other
pending work items. When it gets scheduled back in, and need_resched() is
not set, then the stale grant would be preserved, which is just wrong.
RSEQ already keeps track of that and sets TIF_RSEQ, which invokes the
critical section and ID update mechanisms.
Utilize them and clear the user space slice control member of struct rseq
unconditionally within the existing user access sections. That's just an
unconditional store more in that path.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251215155709.131081527@linutronix.de
|
|
If a time slice extension is granted and the reschedule delayed, the kernel
has to ensure that user space cannot abuse the extension and exceed the
maximum granted time.
It was suggested to implement this via the existing hrtick() timer in the
scheduler, but that turned out to be problematic for several reasons:
1) It creates a dependency on CONFIG_SCHED_HRTICK, which can be disabled
independently of CONFIG_HIGHRES_TIMERS
2) HRTICK usage in the scheduler can be runtime disabled or is only used
for certain aspects of scheduling.
3) The function is calling into the scheduler code and that might have
unexpected consequences when this is invoked due to a time slice
enforcement expiry. Especially when the task managed to clear the
grant via sched_yield(0).
It would be possible to address #2 and #3 by storing state in the
scheduler, but that is extra complexity and fragility for no value.
Implement a dedicated per CPU hrtimer instead, which is solely used for the
purpose of time slice enforcement.
The timer is armed when an extension was granted right before actually
returning to user mode in rseq_exit_to_user_mode_restart().
It is disarmed, when the task relinquishes the CPU. This is expensive as
the timer is probably the first expiring timer on the CPU, which means it
has to reprogram the hardware. But that's less expensive than going through
a full hrtimer interrupt cycle for nothing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251215155709.068329497@linutronix.de
|
|
The kernel sets SYSCALL_WORK_RSEQ_SLICE when it grants a time slice
extension. This allows to handle the rseq_slice_yield() syscall, which is
used by user space to relinquish the CPU after finishing the critical
section for which it requested an extension.
In case the kernel state is still GRANTED, the kernel resets both kernel
and user space state with a set of sanity checks. If the kernel state is
already cleared, then this raced against the timer or some other interrupt
and just clears the work bit.
Doing it in syscall entry work allows to catch misbehaving user space,
which issues an arbitrary syscall, i.e. not rseq_slice_yield(), from the
critical section. Contrary to the initial strict requirement to use
rseq_slice_yield() arbitrary syscalls are not considered a violation of the
ABI contract anymore to allow onion architecture applications, which cannot
control the code inside a critical section, to utilize this as well.
If the code detects inconsistent user space that result in a SIGSEGV for
the application.
If the grant was still active and the task was not preempted yet, the work
code reschedules immediately before continuing through the syscall.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155709.005777059@linutronix.de
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
Implement a prctl() so that tasks can enable the time slice extension
mechanism. This fails, when time slice extensions are disabled at compile
time or on the kernel command line and when no rseq pointer is registered
in the kernel.
That allows to implement a single trivial check in the exit to user mode
hotpath, to decide whether the whole mechanism needs to be invoked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.858717691@linutronix.de
|
|
Extend the quick statistics with time slice specific fields.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.795202254@linutronix.de
|
|
Guard the time slice extension functionality with a static key, which can
be disabled on the kernel command line.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.733429292@linutronix.de
|
|
Aside of a Kconfig knob add the following items:
- Two flag bits for the rseq user space ABI, which allow user space to
query the availability and enablement without a syscall.
- A new member to the user space ABI struct rseq, which is going to be
used to communicate request and grant between kernel and user space.
- A rseq state struct to hold the kernel state of this
- Documentation of the new mechanism
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251215155708.669472597@linutronix.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
Subject: netfilter: updates for net-next
1) Speed up nftables transactions after earlier transaction failed.
Due to a (harmeless) bug we remained in slow paranoia mode until
a successful transaction completes.
2) Allow generic tracker to resolve clashes, this avoids very rare
packet drops. From Yuto Hamaguchi.
3) Increase the cleanup budget to 64 entries in nf_conncount to reap
more entries in one go, from Fernando Fernandez Mancera.
4) Allow icmp trackers to resolve clashes, this avoids very rare
initial packet drop with test cases that have high-frequency pings.
After this all trackers except tcp and sctp allow clash resolution.
5) Disentangle netfilter headers, don't include nftables/xtables headers
in subsystems that are unrelated.
6) Don't rely on implicit includes coming from nf_conntrack_proto_gre.h.
7) Allow nfnetlink_queue nfq instance struct to get accounted via memcg,
from Scott Mitchell.
8) Reject bogus xt target/match data upfront via netlink policiy in
nft_compat interface rather than relying on x_tables API to do it.
9) Fix nf_conncount breakage when trying to limit loopback flows via
prerouting rule, from Fernando Fernandez Mancera.
This is a recent breakage but not seen as urgent enough to rush this
via net tree at this late stage in development cycle.
10) Fix a possible off-by-one when parsing tcp option in xtables tcpmss
match. Also handled via -next due to late stage in development
cycle.
* tag 'nf-next-26-01-20' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: xt_tcpmss: check remaining length before reading optlen
netfilter: nf_conncount: fix tracking of connections from localhost
netfilter: nft_compat: add more restrictions on netlink attributes
netfilter: nfnetlink_queue: nfqnl_instance GFP_ATOMIC -> GFP_KERNEL_ACCOUNT allocation
netfilter: nf_conntrack: don't rely on implicit includes
netfilter: don't include xt and nftables.h in unrelated subsystems
netfilter: nf_conntrack: enable icmp clash support
netfilter: nf_conncount: increase the connection clean up limit to 64
netfilter: nf_conntrack: Add allow_clash to generic protocol handler
netfilter: nf_tables: reset table validation state on abort
====================
Link: https://patch.msgid.link/20260120191803.22208-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some drivers of MAC + tightly integrated PCS (example: SJA1105 + XPCS
covered by same reset domain) need to perform resets at runtime.
The reset is triggered by the MAC driver, and it needs to restore its
and the PCS' registers, all invisible to phylink.
However, there is a desire to simplify the API through which the MAC and
the PCS interact, so this becomes challenging.
Phylink holds all the necessary state to help with this operation, and
can offer two helpers which walk the MAC and PCS drivers again through
the callbacks required during a destructive reset operation. The
procedure is as follows:
Before reset, MAC driver calls phylink_replay_link_begin():
- Triggers phylink mac_link_down() and pcs_link_down() methods
After reset, MAC driver calls phylink_replay_link_end():
- Triggers phylink mac_config() -> pcs_config() -> mac_link_up() ->
pcs_link_up() methods.
MAC and PCS registers are restored with no other custom driver code.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
clang does not inline this helper in GRO fast path.
We can save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 156/-218 (-62)
Function old new delta
tcp6_gro_complete 227 311 +84
tcp4_gro_complete 325 397 +72
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
Total: Before=22592724, After=22592662, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'add-devm_clk_bulk_get_optional_enable-helper-and-use-in-axi-ethernet-driver'
Suraj Gupta says:
====================
Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver
This patch series introduces a new managed clock framework helper function
and demonstrates its usage in AXI ethernet driver.
Device drivers frequently need to get optional bulk clocks, prepare them,
and enable them during probe, while ensuring automatic cleanup on device
unbind. Currently, this requires three separate operations with manual
cleanup handling.
The new devm_clk_bulk_get_optional_enable() helper combines these
operations into a single managed call, eliminating boilerplate code and
following the established pattern of devm_clk_bulk_get_all_enabled().
====================
Link: https://patch.msgid.link/20260116192725.972966-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A previous commit got rid of any use of this member, but forgot to
remove it. Kill it.
Fixes: f4bb2f65bb81 ("io_uring/eventfd: move ctx->evfd_last_cq_tail into io_ev_fd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.20
Support multiple wait queues in the SCM firmware interface and provide
discovery of the wait queue interrupt to deal with the cases where
bootloader didn't patch the DeviceTree with the IRQ information.
Refactor the MDT loader and the SCM driver's peripheral authentication
service interface and introduce support for passing a remoteproc
resource table to the firmware. The remoteproc patches that uses this
and uses this to configure the IOMMU are included here due to
bidirectional dependencies. The end result is remoteproc support on the
Glymur platform.
Enable QSEECOM and thereby UEFI variable access, on the Surface Pro 11.
Make the QMI interface endianness aware, to support ath1Xk on big endian
machines.
Add the Glymur support in LLCC driver.
* tag 'qcom-drivers-for-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: preserve CPU endianness for QMI_DATA_LEN
soc: qcom: fix QMI encoding/decoding for basic elements
soc: qcom: check QMI basic element error codes
soc: qcom: ubwc: add missing include
remoteproc: qcom: pas: Enable Secure PAS support with IOMMU managed by Linux
remoteproc: pas: Extend parse_fw callback to fetch resources via SMC call
firmware: qcom_scm: Add qcom_scm_pas_get_rsc_table() to get resource table
firmware: qcom_scm: Add SHM bridge handling for PAS when running without QHEE
firmware: qcom_scm: Refactor qcom_scm_pas_init_image()
firmware: qcom_scm: Add a prep version of auth_and_reset function
soc: qcom: mdtloader: Remove qcom_mdt_pas_init() from exported symbols
soc: qcom: mdtloader: Add PAS context aware qcom_mdt_pas_load() function
remoteproc: pas: Replace metadata context with PAS context structure
firmware: qcom_scm: Introduce PAS context allocator helper function
firmware: qcom_scm: Rename peripheral as pas_id
firmware: qcom_scm: Remove redundant piece of code
dt-bindings: remoteproc: qcom,pas: Add iommus property
soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe
soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications
dt-bindings: qcom,pdc: document the Milos Power Domain Controller
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.20:
- A few changes from Peng Fan adding dump syslog support for i.MX
System Manager firmware driver, cleaning up soc-imx9 driver, fixing
error handling for soc-imx8m driver
* tag 'imx-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx8m: Fix error handling for clk_prepare_enable()
soc: imx: Spport i.MX9[4,52]
soc: imx: Use dev_err_probe() for i.MX9
soc: imx: Use device-managed APIs for i.MX9
firmware: imx: sm-misc: Dump syslog info
firmware: arm_scmi: imx: Support getting syslog of MISC protocol
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.20
1. Several improvements in Exynos ChipID Socinfo driver and finally
adding Google GS101 SoC support.
2. Few cleanups from old code.
3. Documenting Axis Artpec-9 SoC PMU (Power Management Unit).
* tag 'samsung-drivers-6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c: remove a leftover hwmon-s3c.h header file
dt-bindings: soc: samsung: exynos-pmu: Drop unnecessary select schema
soc: samsung: exynos-chipid: add google,gs101-otp support
soc: samsung: exynos-chipid: downgrade dev_info to dev_dbg for soc info
soc: samsung: exynos-chipid: rename method
dt-bindings: nvmem: add google,gs101-otp
soc: samsung: exynos-chipid: use dev_err_probe where appropiate
soc: samsung: exynos-chipid: use devm action to unregister soc device
dt-bindings: samsung: exynos-pmu: Add compatible for ARTPEC-9 SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE sysfs for 6.20
- Add an optional generic sysfs attribute for TEE revision
- Implement revision reporting for OP-TEE using both SMC and FF-A ABIs
* tag 'tee-sysfs-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tee: optee: store OS revision for TEE core
tee: add revision sysfs attribute
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
TEE bus callback for 6.20
- Move from generic device_driver to TEE bus-specific callbacks
- Add module_tee_client_driver() and registration helpers to reduce
boilerplate
- Convert several client drivers (TPM, KEYS, firmware, EFI, hwrng,
and RTC)
- Update documentation and fix kernel-doc warnings
* tag 'tee-bus-callback-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
tpm/tpm_ftpm_tee: Fix kdoc after function renames
tpm/tpm_ftpm_tee: Make use of tee bus methods
tpm/tpm_ftpm_tee: Make use of tee specific driver registration
KEYS: trusted: Make use of tee bus methods
KEYS: trusted: Migrate to use tee specific driver registration function
firmware: tee_bnxt: Make use of tee bus methods
firmware: tee_bnxt: Make use of module_tee_client_driver()
firmware: arm_scmi: Make use of tee bus methods
firmware: arm_scmi: optee: Make use of module_tee_client_driver()
efi: stmm: Make use of tee bus methods
efi: stmm: Make use of module_tee_client_driver()
hwrng: optee - Make use of tee bus methods
hwrng: optee - Make use of module_tee_client_driver()
rtc: optee: Make use of tee bus methods
rtc: optee: Migrate to use tee specific driver registration function
tee: Adapt documentation to cover recent additions
tee: Add probe, remove and shutdown bus callbacks to tee_client_driver
tee: Add some helpers to reduce boilerplate for tee client drivers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers
Renesas driver updates for v6.20 (take two)
- Add and use for_each_of_imap_item() iterator,
- Add support for the RZ/N1 GPIO Interrupt Multiplexer.
* tag 'renesas-drivers-for-v6.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
soc: renesas: Add support for RZ/N1 GPIO Interrupt Multiplexer
irqchip/renesas-rza1: Use for_each_of_imap_item iterator
irqchip/ls-extirq: Use for_each_of_imap_item iterator
of: unittest: Add a test case for for_each_of_imap_item iterator
of/irq: Introduce for_each_of_imap_item
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This reverts commit 5f0bf80cc5e04d31eeb201683e0b477c24bd18e7.
This was asked to be reverted as it is not the correct way to do this.
Fixes: 5f0bf80cc5e0 ("mmc: rtsx_pci: add quirk to disable MMC_CAP_AGGRESSIVE_PM for RTS525A")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit eac85fbd0867c25ac517f58fae401d65c627edff.
This is not the correct change, so revert it for now.
Fixes: eac85fbd0867 ("mmc: rtsx: reset power state on suspend")
Cc: Matthew Schwartz <matthew.schwartz@linux.dev>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a helper to allow an existing bio to be resubmitted without
having to re-add the payload.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
|
|
The IOMMU code operates on physical addresses which can be outside
of system RAM.
Add a new function page_ext_get_from_phys() to abstract the logic of
checking the address and returning the page_ext.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
The PMF driver retrieves NPU metrics data from the PMFW. Introduce a new
interface to make NPU metrics accessible to other drivers like AMDXDNA
driver, which can access and utilize this information as needed.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[lizhi: save return value of is_npu_metrics_supported() and return it]
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260115173448.403826-1-lizhi.hou@amd.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51162 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The HDMI 2.1 specification introduced the Fixed Rate Link (FRL) mode,
aiming to replace the older Transition-Minimized Differential Signaling
(TMDS) mode used in previous HDMI versions to support much higher
bandwidths (up to 48 Gbps) for modern video and audio formats.
FRL has been designed to support ultra high resolution formats at high
refresh rates like 8K@60Hz or 4K@120Hz, and eliminates the need for
dynamic bandwidth adjustments, which reduces latency. It operates with
3 or 4 lanes at different link rates: 3Gbps, 6Gbps, 8Gbps, 10Gbps or
12Gbps.
Add support for configuring the FRL mode for HDMI PHYs.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260113-phy-hdptx-frl-v6-1-8d5f97419c0b@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
