| Age | Commit message (Collapse) | Author |
|---|
|
Add support for a generic ioctl read/write interface using which users
can request firmware to perform read/write operations on a protected and
secure address space.
The functionality is introduced through the means of two new IOCTL IDs
which extend the existing PM_IOCTL EEMI API:
- IOCTL_READ_REG
- IOCTL_MASK_WRITE_REG
The caller only passes the node id of the given device and an offset.
The base address is not exposed to the caller and internally retrieved
by the firmware. Firmware will enforce an access policy on the incoming
read/write request.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@amd.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Acked-by: Senthil Nathan Thangaraj <senthilnathan.thangaraj@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Acked-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251021113003.13650-3-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add an iterator for all PHY's on a MII bus, and phy_find_next()
as a prerequisite.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/cd112f15-401a-43d9-8525-9ff0965a68cd@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the ability to append the incoming IP interface information to
ICMPv4 error messages in accordance with RFC 5837 and RFC 4884. This is
required for more meaningful traceroute results in unnumbered networks.
The feature is disabled by default and controlled via a new sysctl
("net.ipv4.icmp_errors_extension_mask") which accepts a bitmask of ICMP
extensions to append to ICMP error messages. Currently, only a single
value is supported, but the interface and the implementation should be
able to support more extensions, if needed.
Clone the skb and copy the relevant data portions before modifying the
skb as the caller of __icmp_send() still owns the skb after the function
returns. This should be fine since by default ICMP error messages are
rate limited to 1000 per second and no more than 1 per second per
specific host.
Trim or pad the packet to 128 bytes before appending the ICMP extension
structure in order to be compatible with legacy applications that assume
that the ICMP extension structure always starts at this offset (the
minimum length specified by RFC 4884).
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251027082232.232571-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The logic in wbc_to_tag() is widely used in file systems, so modify this
function to be inline and use it in file systems.
This patch has only passed compilation tests, but it should be fine.
Signed-off-by: Julian Sun <sunjunchao@bytedance.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The relatively low minimal writeback size of 4MiB means that written back
inodes on rotational media are switched a lot. Besides introducing
additional seeks, this also can lead to extreme file fragmentation on
zoned devices when a lot of files are cached relative to the available
writeback bandwidth.
Add a superblock field that allows the file system to override the
default size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251017034611.651385-3-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename filemap_fdatawrite_range_kick to filemap_flush_range because it
is the ranged version of filemap_flush.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-11-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use filemap_fdatawrite_range and filemap_fdatawrite_range_kick instead
of the low-level __filemap_fdatawrite_range that requires the caller
to know the internals of the writeback_control structure and remove
__filemap_fdatawrite_range now that it is trivial and only two callers
would be left.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-10-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace filemap_fdatawrite_wbc, which exposes a writeback_control to the
callers with a filemap_writeback helper that takes all the possible
arguments and declares the writeback_control itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-9-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Abstract out the btrfs-specific behavior of kicking off I/O on a number
of pages on an address_space into a well-defined helper.
Note: there is no kerneldoc comment for the new function because it is
not part of the public API.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251024080431.324236-7-hch@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The flat regcache will always assume the data in the cache is valid.
Since the cache is preferred over hardware access, this may shadow the
actual state of the device.
Add a new containing cache structure with the flat data table and a
bitmap indicating cache validity. REGCACHE_FLAT will still behave as
before, as the validity is ignored.
Define new cache type REGCACHE_FLAT_S: a flat cache with sparse
validity. The sparse validity is used to determine if a hardware access
should occur to initialize the cache on the fly, vs. at regmap init for
REGCACHE_FLAT. Contrary to REGCACHE_FLAT, this allows us to implement
regcache_ops.drop.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20251029081248.52607-2-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for deferred userspace unwind to perf.
Where perf currently relies on in-place stack unwinding; from NMI
context and all that. This moves the userspace part of the unwind to
right before the return-to-userspace.
This has two distinct benefits, the biggest is that it moves the
unwind to a faultable context. It becomes possible to fault in debug
info (.eh_frame, SFrame etc.) that might not otherwise be readily
available. And secondly, it de-duplicates the user callchain where
multiple samples happen during the same kernel entry.
To facilitate this the perf interface is extended with a new record
type:
PERF_RECORD_CALLCHAIN_DEFERRED
and two new attribute flags:
perf_event_attr::defer_callchain - to request the user unwind be deferred
perf_event_attr::defer_output - to request PERF_RECORD_CALLCHAIN_DEFERRED records
The existing PERF_RECORD_SAMPLE callchain section gets a new
context type:
PERF_CONTEXT_USER_DEFERRED
After which will come a single entry, denoting the 'cookie' of the
deferred callchain that should be attached here, matching the 'cookie'
field of the above mentioned PERF_RECORD_CALLCHAIN_DEFERRED.
The 'defer_callchain' flag is expected on all events with
PERF_SAMPLE_CALLCHAIN. The 'defer_output' flag is expect on the event
responsible for collecting side-band events (like mmap, comm etc.).
Setting 'defer_output' on multiple events will get you duplicated
PERF_RECORD_CALLCHAIN_DEFERRED records.
Based on earlier patches by Josh and Steven.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251023150002.GR4067720@noisy.programming.kicks-ass.net
|
|
When userspace is interrupted at the start of a function, before we
get a chance to complete the frame, unwind will miss one caller.
X86 has a uprobe specific fixup for this, add bits to the generic
unwinder to support this.
Suggested-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251024145156.GM4068168@noisy.programming.kicks-ass.net
|
|
It is important to be able to unwind compat tasks too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250924080119.613695709@infradead.org
|
|
The unwind_task_info::unwind_mask was manipulated using a mixture of:
regular store
WRITE_ONCE()
try_cmpxchg()
set_bit()
atomic_long_*()
Clean up and make it consistently atomic_long_t.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250924080119.384384486@infradead.org
|
|
Invert the condition of the first if and make it an early exit to
reduce an indent level for the rest fo the function.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.777916262@infradead.org
|
|
To be self sufficient, the file needs to include linux/types.h. This
provides things like u32/u64 and struct callback_head.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.665787071@infradead.org
|
|
There are some exceptionally long lines that cause ugly wrapping.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250924080118.545274393@infradead.org
|
|
After conversion of arch code to use physical address mapping,
there are no users of .map_page() and .unmap_page() callbacks,
so let's remove them.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-14-3bbfe3a25cdf@kernel.org
|
|
After ARM and XEN conversions to use physical addresses for the mapping,
there are no in-kernel users for map_resource/unmap_resource callbacks,
so remove them.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-6-3bbfe3a25cdf@kernel.org
|
|
Add new .map_phys() and .unmap_phys() callbacks to dma_map_ops as a
preparation to replace .map_page() and .unmap_page() respectively.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-1-3bbfe3a25cdf@kernel.org
|
|
The padding field in the structure was previously reserved to
maintain a stable interface for potential new fields, ensuring
compatibility with user-space shared data structures.
However,it was accidentally removed by tiantao in a prior commit,
which may lead to incompatibility between user space and the kernel.
This patch reinstates the padding to restore the original structure
layout and preserve compatibility.
Fixes: 8ddde07a3d28 ("dma-mapping: benchmark: extract a common header file for map_benchmark definition")
Cc: stable@vger.kernel.org
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Reported-by: Barry Song <baohua@kernel.org>
Closes: https://lore.kernel.org/lkml/CAGsJ_4waiZ2+NBJG+SCnbNk+nQ_ZF13_Q5FHJqZyxyJTcEop2A@mail.gmail.com/
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251028120900.2265511-2-xiaqinxin@huawei.com
|
|
dma_map_benchmark is a standalone developer tool rather than an
automated selftest. It has no pass/fail criteria, expects manual
invocation, and is built as a normal userspace binary. Move it to
tools/dma/ and add a minimal Makefile.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251028120900.2265511-3-xiaqinxin@huawei.com
|
|
Conflicts:
kernel/sched/ext.c
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
enqueue_to_backlog() is showing up in kernel profiles on hosts
with many cores, when RFS/RPS is used.
The following softnet_data fields need to be updated:
- input_queue_tail
- input_pkt_queue (next, prev, qlen, lock)
- backlog.state (if input_pkt_queue was empty)
Unfortunately they are currenly using two cache lines:
/* --- cacheline 3 boundary (192 bytes) --- */
call_single_data_t csd __attribute__((__aligned__(64))); /* 0xc0 0x20 */
struct softnet_data * rps_ipi_next; /* 0xe0 0x8 */
unsigned int cpu; /* 0xe8 0x4 */
unsigned int input_queue_tail; /* 0xec 0x4 */
struct sk_buff_head input_pkt_queue; /* 0xf0 0x18 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x108 0x1f0 */
Add one ____cacheline_aligned_in_smp to make sure they now are using
a single cache line.
Also, because napi_struct has written fields, make @state its first field.
We want to make sure that cpus adding packets to sd->input_pkt_queue
are not slowing down cpus processing their backlog because of
false sharing.
After this patch new layout is:
/* --- cacheline 5 boundary (320 bytes) --- */
long int pad[3] __attribute__((__aligned__(64))); /* 0x140 0x18 */
unsigned int input_queue_tail; /* 0x158 0x4 */
/* XXX 4 bytes hole, try to pack */
struct sk_buff_head input_pkt_queue; /* 0x160 0x18 */
struct napi_struct backlog __attribute__((__aligned__(8))); /* 0x178 0x1f0 */
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251024091240.3292546-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to allow an interface to remove an added character from the
trace_seq and seq_buf descriptors, add helper functions trace_seq_pop()
and seq_buf_pop().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Takaya Saeki <takayas@google.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/20251028231148.594898736@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Next installment of the SDCA changes, hopefully the next series after
this should be the full class driver. It is worth noting this series has
a build dependency on a patch working its way through the PM/ACPI tree:
commit ac46f5b6c661 ("ACPICA: Add SoundWire File Table (SWFT) signature")
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
But we can probably worry about that later, as normally there is a
reasonable amount of review on these SDCA series'.
This series broadly breaks down into 3 chunks, first there are several
changes to remove the assumption that the struct device used for SDCA
purposes represents the SoundWire slave. This is because the SDCA class
driver will be made of an auxiliary driver for each SDCA Function, thus
the SoundWire slave will be on the parent device for each individual
driver. Then there are patches to add support for UMP/FDL. And then
finally since the rest of the HID support is there and UMP was the last
missing part required a small patch to add a function to allow reporting
of HID events from SDCA devices.
|
|
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
|
|
The ability to emulate a host bridge is useful not only for hardware PCI
controllers like CONFIG_VMD, or virtual PCI controllers like
CONFIG_PCI_HYPERV, but also for test and development scenarios like
CONFIG_SAMPLES_DEVSEC [1].
One stumbling block for defining CONFIG_SAMPLES_DEVSEC, a sample
implementation of a platform TSM for PCI Device Security, is the need to
accommodate PCI_DOMAINS_GENERIC architectures alongside x86 [2].
In support of supplementing the existing CONFIG_PCI_BRIDGE_EMUL
infrastructure for host bridges:
* Introduce pci_bus_find_emul_domain_nr() as a common way to find a free
PCI domain number whether that is to reuse the existing dynamic
allocation code in the !ACPI case, or to assign an unused domain above
the last ACPI segment.
* Convert pci-hyperv to the new allocator so that the PCI core can
unconditionally assume that bridge->domain_nr != PCI_DOMAIN_NR_NOT_SET
is the dynamically allocated case.
A follow on patch can also convert vmd to the new scheme. Currently vmd is
limited to CONFIG_PCI_DOMAINS_GENERIC=n (x86) so, unlike pci-hyperv, it
does not immediately conflict with this new pci_bus_find_emul_domain_nr()
mechanism.
Link: http://lore.kernel.org/174107249038.1288555.12362100502109498455.stgit@dwillia2-xfh.jf.intel.com [1]
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Closes: http://lore.kernel.org/20250311144601.145736-3-suzuki.poulose@arm.com [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Rob Herring <robh@kernel.org>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Link: https://patch.msgid.link/20251024224622.1470555-2-dan.j.williams@intel.com
|
|
A later commit will reduce the size of the RCU watching counter to free up
some bits for another purpose. Paul suggested adding a config option to
test the extreme case where the counter is reduced to its minimum usable
width for rcutorture to poke at, so do that.
Make it only configurable under RCU_EXPERT. While at it, add a comment to
explain the layout of context_tracking->state.
Link: http://lore.kernel.org/r/4c2cb573-168f-4806-b1d9-164e8276e66a@paulmck-laptop
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
|
|
Per commit 9442490a0286 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.
Fixes: 68622bdfefb9 ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.
Cc: stable@vger.kernel.org
Fixes: 1e5d088a52c2 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
A race condition during gadget teardown can lead to a use-after-free
in usb_gadget_state_work(), as reported by KASAN:
BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0
Workqueue: events usb_gadget_state_work
The fundamental race occurs because a concurrent event (e.g., an
interrupt) can call usb_gadget_set_state() and schedule gadget->work
at any time during the cleanup process in usb_del_gadget().
Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after
device removal") attempted to fix this by moving flush_work() to after
device_del(). However, this does not fully solve the race, as a new
work item can still be scheduled *after* flush_work() completes but
before the gadget's memory is freed, leading to the same use-after-free.
This patch fixes the race condition robustly by introducing a 'teardown'
flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is
set during cleanup in usb_del_gadget() *before* calling flush_work() to
prevent any new work from being scheduled once cleanup has commenced.
The scheduling site, usb_gadget_set_state(), now checks this flag under
the lock before queueing the work, thus safely closing the race window.
Fixes: 5702f75375aa9 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20251023054945.233861-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A REQ_OP_OPEN_ZONE request changes the condition of a sequential zone of
a zoned block device to the explicitly open condition
(BLK_ZONE_COND_EXP_OPEN). As such, it should be considered a write
operation.
Change this operation code to be an odd number to reflect this. The
following operation numbers are changed to keep the numbering compact.
No problems were reported without this change as this operation has no
data. However, this unifies the zone operation to reflect that they
modify the device state and also allows strengthening checks in the
block layer, e.g. checking if this operation is not issued against a
read-only device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
REQ_OP_ZONE_RESET_ALL is a zone management request. Fix
op_is_zone_mgmt() to return true for that operation, like it already
does for REQ_OP_ZONE_RESET.
While no problems were reported without this fix, this change allows
strengthening checks in various block device drivers (scsi sd,
virtioblk, DM) where op_is_zone_mgmt() is used to verify that a zone
management command is not being issued to a regular block device.
Fixes: 6c1b1da58f8c ("block: add zone open, close and finish operations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Merge series from Oleksij Rempel <o.rempel@pengutronix.de>:
This series adds input supply definitions for the NXP PCA9450 PMIC.
Some systems detect power events such as undervoltage before the PMIC.
To allow correct propagation of such events, each regulator must define
its upstream input supply. The first patch updates the devicetree
binding to document new *-supply properties, and the second patch adds
matching .supply_name entries in the driver.
Changes in this series:
- Document INL1, INB13, INB26 and INB45 supply properties
- Link all LDO and BUCK regulators to their corresponding input groups
|
|
Implement balance ID support for multiplane LAG configurations. This
feature enables per-multiplane group load balancing by extending the
software system image GUID with a balance ID component.
Key implementations:
- Enable lag_per_mp_group capability when supported by hardware.
- Append load_balance_id to software system image GUID when conditions
are met.
- Increase MLX5_SW_IMAGE_GUID_MAX_BYTES from 8 to 9 to accommodate the
extra byte.
The balance ID is appended to the system image GUID only when both
load_balance_id and lag_per_mp_group capabilities are available, ensuring
backward compatibility while enabling enhanced LAG functionality.
This enhancement allows for more granular load balancing control in complex
multi-plane LAG deployments, improving network performance and flexibility.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace direct hardware system image GUID usage with a new software
system image GUID function that supports variable-length identifiers.
Key changes:
- Add mlx5_query_nic_sw_system_image_guid() function with length parameter.
- Update all callsites to use the new function and buffer/length approach.
- Modify mapping contexts to use byte arrays instead of u64 keys.
- Update devcom matching to support variable-length keys.
- Change mlx5_same_hw_devs() to use buffer comparison instead of u64.
This refactoring prepares the infrastructure for balance ID support,
which requires extending the system image GUID with additional data.
The change maintains backward compatibility while enabling future
enhancements.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761211020-925651-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the properties 'skew-delay-input-ps' and 'skew-delay-output-ps'
to the generic parameters used for parsing DT files. This allows to
specify the independent skew delay value for the two directions.
This enables drivers that use the generic pin configuration to get
the value passed through these new properties.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Allow a generic pinconf property to specify its argument as one of
the strings in a match list.
Convert the matching string to an integer value using the index in
the list, then keep using this value in the generic pinconf code.
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Some KASAN builds are failing to properly optimize this code --
luckily we don't care about core quality for KASAN builds, so just
exclude it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Closes: https://lore.kernel.org/oe-kbuild-all/202510251641.idrNXhv5-lkp@intel.com/
|
|
File dynptr reads may sleep when the requested folios are not in
the page cache. To avoid sleeping in non-sleepable contexts while still
supporting valid sleepable use, given that dynptrs are non-sleepable by
default, enable sleeping only when bpf_dynptr_from_file() is invoked
from a sleepable context.
This change:
* Introduces a sleepable constructor: bpf_dynptr_from_file_sleepable()
* Override non-sleepable constructor with sleepable if it's always
called in sleepable context
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-10-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the necessary verifier plumbing for the new file-backed dynptr type.
Introduce two kfuncs for its lifecycle management:
* bpf_dynptr_from_file() for initialization
* bpf_dynptr_file_discard() for destruction
Currently there is no mechanism for kfunc to release dynptr, this patch
add one:
* Dynptr release function sets meta->release_regno
* Call unmark_stack_slots_dynptr() if meta->release_regno is set and
dynptr ref_obj_id is set as well.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-7-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Move struct freader and prototypes of the functions operating on it into
the buildid.h.
This allows reusing freader outside buildid, e.g. for file dynptr
support added later.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251026203853.135105-4-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Having removed the use of the cpu_armpmu per-CPU variable from the
interrupt handling, the only user left is the BRBE scheduler hook.
It is easy to drop the use of this variable by following the pointer to the
generic PMU structure, and get the arm_pmu structure from there.
Perform the conversion and kill cpu_armpmu altogether.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-27-maz@kernel.org
|
|
There is no in-tree users of this helper since b13b41cc3dc18 ("misc:
ti_fpc202: Switch to of_fwnode_handle()"), and is replaced with
of_fwnode_handle().
Get rid of it.
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-26-maz@kernel.org
|
|
These two helpers do not have any user anymore, and can be removed,
together with the affinity field kept in the irqdesc structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-25-maz@kernel.org
|
|
This code is now completely unused, and nobody will ever miss it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-24-maz@kernel.org
|
|
Let the PMU driver request both NMIs and normal interrupts with an affinity mask
matching the PMU affinity.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-19-maz@kernel.org
|
|
While it would be nice to simply make request_percpu_irq() take an affinity
mask, the churn is likely to be on the irritating side given that most
drivers do not give a damn about affinities.
So take the more innocuous path to provide a helper that parallels
request_percpu_irq(), with an affinity as a bonus argument.
Yes, request_percpu_irq_affinity() is a bit of a mouthful.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251020122944.3074811-18-maz@kernel.org
|
