summaryrefslogtreecommitdiff
path: root/include/net/bluetooth
AgeCommit message (Collapse)Author
2020-06-18Bluetooth: Replace wakeable list with flagAbhishek Pandit-Subedi
Since the classic device list now supports flags, convert the wakeable list into a flag on the existing device list. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-18Bluetooth: Add bdaddr_list_with_flags for classic whitelistAbhishek Pandit-Subedi
In order to more easily add device flags to classic devices, create a new type of bdaddr_list that supports setting flags. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-06-12Bluetooth: centralize default value initialization.Alain Michaud
This patch centralized the initialization of default parameters. This is required to allow clients to more easily customize the default system parameters. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: mgmt: read/set system parameter definitionsAlain Michaud
This patch submits the corresponding kernel definitions to mgmt.h. This is submitted before the implementation to avoid any conflicts in values allocations. Signed-off-by: Alain Michaud <alainm@chromium.org> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Yu Liu <yudiliu@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Use only 8 bits for the HCI CMSG state flagsAlain Michaud
This change implements suggestions from the code review of the SCO CMSG state flag patch. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-12Bluetooth: Add support for BT_PKT_STATUS CMSG data for SCO connectionsAlain Michaud
This change adds support for reporting the BT_PKT_STATUS to the socket CMSG data to allow the implementation of a packet loss correction on erroneous data received on the SCO socket. The patch was partially developed by Marcel Holtmann and validated by Hsin-yu Chao. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-20Bluetooth: Consolidate encryption handling in hci_encrypt_cfmLuiz Augusto von Dentz
This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection state is BT_CONFIG so callers don't have to check the state. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-18Bluetooth: L2CAP: Replace zero-length array with flexible-arrayGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Add hook for driver to prevent wake from suspendAbhishek Pandit-Subedi
Let drivers have a hook to disable configuring scanning during suspend. Drivers should use the device_may_wakeup function call to determine whether hci should be configured for wakeup. For example, an implementation for btusb may look like the following: bool btusb_prevent_wake(struct hci_dev *hdev) { struct btusb_data *data = hci_get_drvdata(hdev); return !device_may_wakeup(&data->udev->dev); } Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-13Bluetooth: Rename BT_SUSPEND_COMPLETEAbhishek Pandit-Subedi
Renamed BT_SUSPEND_COMPLETE to BT_SUSPEND_CONFIGURE_WAKE since it sets up the event filter and whitelist for wake-up. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-11Bluetooth: Introduce debug feature when dynamic debug is disabledMarcel Holtmann
In case dynamic debug is disabled, this feature allows a vendor platform to provide debug statement printing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Add support for experimental features configurationMarcel Holtmann
To enable platform specific experimental features, introduce this new set of management commands and events. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: Introduce HCI_MGMT_HDEV_OPTIONAL optionMarcel Holtmann
When setting HCI_MGMT_HDEV_OPTIONAL it is possible to target a specific conntroller or a global interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-05-11Bluetooth: replace zero-length array with flexible-array memberMarcel Holtmann
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-28Bluetooth: Adding driver and quirk defs for multi-role LEAlain Michaud
This change adds the relevant driver and quirk to allow drivers to report the le_states as being trustworthy. This has historically been disabled as controllers did not reliably support this. In particular, this will be used to relax this condition for controllers that have been well tested and reliable. /* Most controller will fail if we try to create new connections * while we have an existing one in slave role. */ if (hdev->conn_hash.le_num_slave > 0) return NULL; Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-15Bluetooth: Clear HCI_LL_RPA_RESOLUTION flag on resetMarcel Holtmann
When the controller is being reset or power cycled, then the flag HCI_LL_RPA_RESOLUTION which indicates if controller based address resolution is active needs to be also reset. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Enable LE Enhanced Connection Complete event.Marcel Holtmann
In case LL Privacy is supported by the controller, it is also a good idea to use the LE Enhanced Connection Complete event for getting all information about the new connection and its addresses. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-15Bluetooth: Sort list of LE features constantsMarcel Holtmann
The list of LE features constants has gotten a bit confused. It lost the order and gained duplicated. Clean this up. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-07Bluetooth: debugfs option to unset MITM flagArchie Pusaka
The BT qualification test SM/MAS/PKE/BV-01-C needs us to turn off the MITM flag when pairing, and at the same time also set the io capability to something other than no input no output. Currently the MITM flag is only unset when the io capability is set to no input no output, therefore the test cannot be executed. This patch introduces a debugfs option to force MITM flag to be turned off. Signed-off-by: Archie Pusaka <apusaka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-04-05Bluetooth: Add HCI device identifier for VIRTIO devicesMarcel Holtmann
This patch assigns the next free HCI device identifier to Bluetooth devices based on VIRTIO devices. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for reading security informationMarcel Holtmann
To allow userspace to make correcty security policy decision, the kernel needs to export a few details of the supported security features and encryption key size information. This command exports this information and also allows future extensions if needed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add support for Read Local Simple Pairing OptionsMarcel Holtmann
With the Read Local Simple Pairing Options command it is possible to retrieve the support for max encryption key size supported by the controller and also if the controller correctly verifies the ECDH public key during pairing. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: Add framework for Microsoft vendor extensionMiao-chen Chou
Micrsoft defined a set for HCI vendor extensions. Check the following link for details: https://docs.microsoft.com/en-us/windows-hardware/drivers/bluetooth/microsoft-defined-bluetooth-hci-commands-and-events This provides the basic framework to enable the extension and read its supported features. Drivers still have to declare support for this extension before it can be utilized by the host stack. Signed-off-by: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-05Bluetooth: add support to notify using SCO air modeSathish Narsimman
notifying using HCI_NOTIFY_CONN_ADD for SCO connection is generic in case of mSBC audio. To differntiate SCO air mode introducing HCI_NOTIFY_ENABLE_SCO_CVSD and HCI_NOTIFY_ENABLE_SCO_TRANSP. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-04-02Bluetooth: Add BT_MODE socket optionLuiz Augusto von Dentz
This adds BT_MODE socket option which can be used to set L2CAP modes, including modes only supported over LE which were not supported using the L2CAP_OPTIONS. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-25Bluetooth: L2CAP: Use DEFER_SETUP to group ECRED connectionsLuiz Augusto von Dentz
This uses the DEFER_SETUP flag to group channels with L2CAP_CREDIT_BASED_CONNECTION_REQ. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-24Bluetooth: L2CAP: Add get_peer_pid callbackLuiz Augusto von Dentz
This adds a callback to read the socket pid. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Pause discovery and advertising during suspendAbhishek Pandit-Subedi
To prevent spurious wake ups, we disable any discovery or advertising when we enter suspend and restore it when we exit suspend. While paused, we disable any management requests to modify discovery or advertising. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle LE devices during suspendAbhishek Pandit-Subedi
To handle LE devices, we must first disable passive scanning and disconnect all connected devices. Once that is complete, we update the whitelist and re-enable scanning Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle BR/EDR devices during suspendAbhishek Pandit-Subedi
To handle BR/EDR devices, we first disable page scan and disconnect all connected devices. Once that is complete, we add event filters (for devices that can wake the system) and re-enable page scan. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-11Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPENDAbhishek Pandit-Subedi
Register for PM_SUSPEND_PREPARE and PM_POST_SUSPEND to make sure the Bluetooth controller is prepared correctly for suspend/resume. Implement the registration, scheduling and task handling portions only in this patch. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: L2CAP: Add module option to enable ECRED modeLuiz Augusto von Dentz
This should make it safe to have the code upstream without affecting stable systems since there are a few details not sort out with ECRED mode e.g: how to initiate multiple connections at once. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: L2CAP: Add initial code for Enhanced Credit Based ModeLuiz Augusto von Dentz
This adds the initial code for Enhanced Credit Based Mode which introduces a new socket mode called L2CAP_MODE_EXT_FLOWCTL, which for the most part work the same as L2CAP_MODE_LE_FLOWCTL but uses different PDUs to setup the connections and also works over BR/EDR. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: L2CAP: Add definitions for Enhanced Credit Based ModeLuiz Augusto von Dentz
This introduces the definitions for the new L2CAP mode called Enhanced Credit Based Mode. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-03-08Bluetooth: Enable erroneous data reporting if WBS is supportedAlain Michaud
This change introduces a wide band speech setting which allows higher level clients to query the local controller support for wide band speech as well as set the setting state when the radio is powered off. Internally, this setting controls if erroneous data reporting is enabled on the controller. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Support querying for WBS support through MGMTAlain Michaud
This patch provides a mechanism for MGMT interface client to query the capability of the controller to support WBS. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Fixing a few comment typos in the quirk definitions.Alain Michaud
This change simply fixes a few typos in the quirk definitions. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Remove adv set for directed advertisingSathish Narsimman
Extended advertising Data is set during bluetooth initialization by default which causes InvalidHCICommandParameters when setting Extended advertising parameters. As per Core Spec 5.2 Vol 2, PART E, Sec 7.8.53, for advertising_event_property LE_LEGACY_ADV_DIRECT_IND does not supports advertising data when the advertising set already contains some, the controller shall return erroc code 'InvalidHCICommandParameters(0x12). So it is required to remove adv set for handle 0x00. since we use instance 0 for directed adv. Signed-off-by: Sathish Narsimman <sathish.narasimman@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-28Bluetooth: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-19Bluetooth: RFCOMM: Use MTU auto tune logicLuiz Augusto von Dentz
This reuse the L2CAP MTU auto logic to select the MTU used for RFCOMM channels, this should increase the maximum from 1013 to 1021 when 3-DH5 is supported. Since it does not set an L2CAP MTU we no longer need a debugfs so that is removed. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-02-14Bluetooth: Add BT_PHY socket optionLuiz Augusto von Dentz
This adds BT_PHY socket option (read-only) which can be used to read the PHYs in use by the underline connection. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15Bluetooth: monitor: Add support for ISO packetsLuiz Augusto von Dentz
This enables passing ISO packets to the monitor socket. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15Bluetooth: Add definitions for CIS connectionsLuiz Augusto von Dentz
These adds the HCI definitions for handling CIS connections along with ISO data packets. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-15Bluetooth: Implementation of MGMT_OP_SET_BLOCKED_KEYS.Alain Michaud
MGMT command is added to receive the list of blocked keys from user-space. The list is used to: 1) Block keys from being distributed by the device during the ke distribution phase of SMP. 2) Filter out any keys that were previously saved so they are no longer used. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Add support for LE PHY Update Complete eventLuiz Augusto von Dentz
This handles LE PHY Update Complete event and store both tx_phy and rx_phy into hci_conn. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-01-04Bluetooth: Remove usage of BT_ERR_RATELIMITED macroMarcel Holtmann
The macro is really not needed and can be replaced with either usage of bt_err_ratelimited or bt_dev_err_ratelimited. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2020-01-04Bluetooth: Adding a bt_dev_warn_ratelimited macro.Alain Michaud
The macro will be used to display rate limited warning messages in the log. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-09-05Bluetooth: Add support for utilizing Fast Advertising IntervalSpoorthi Ravishankar Koppad
Changes made to add support for fast advertising interval as per core 4.1 specification, section 9.3.11.2. A peripheral device entering any of the following GAP modes and sending either non-connectable advertising events or scannable undirected advertising events should use adv_fast_interval2 (100ms - 150ms) for adv_fast_period(30s). - Non-Discoverable Mode - Non-Connectable Mode - Limited Discoverable Mode - General Discoverable Mode Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-08-17Bluetooth: Add debug setting for changing minimum encryption key sizeMarcel Holtmann
For testing and qualification purposes it is useful to allow changing the minimum encryption key size value that the host stack is going to enforce. This adds a new debugfs setting min_encrypt_key_size to achieve this functionality. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2019-07-06Bluetooth: Add support for LE ping featureSpoorthi Ravishankar Koppad
Changes made to add HCI Write Authenticated Payload timeout command for LE Ping feature. As per the Core Specification 5.0 Volume 2 Part E Section 7.3.94, the following code changes implements HCI Write Authenticated Payload timeout command for LE Ping feature. Signed-off-by: Spoorthi Ravishankar Koppad <spoorthix.k@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-02-05 12:39:44 +0000