| Age | Commit message (Collapse) | Author |
|---|
|
Commit 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
introduced the concept of type in ah_attr:
* During ib_register_device, each port is checked for its type which
is stored in ib_device's port_immutable array.
* During uverbs' modify_qp, the type is inferred using the port number
in ib_uverbs_qp_dest struct (address vector) by accessing the
relevant port_immutable array and the type is passed on to
providers.
IB spec (version 1.3) enforces a valid port value only in Reset to
Init. During Init to RTR, the address vector must be valid but port
number is not mentioned as a field in the address vector, so its
value is not validated, which leads to accesses to a non-allocated
memory when inferring the port type.
Save the real port number in ib_qp during modify to Init (when the
comp_mask indicates that the port number is valid) and use this value
to infer the port type.
Avoid copying the address vector fields if the matching bit is not set
in the attr_mask. Address vector can't be modified before the port, so
no valid flow is affected.
Fixes: 44c58487d51a ('IB/core: Define 'ib' and 'roce' rdma_ah_attr types')
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
If a message comes in and we do not have the client in the table, then
try to load the module supplying that client using MODULE_ALIAS to find
it.
This duplicates the scheme seen in other netlink muxes (eg nfnetlink).
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The macro size is valid. This change makes it less ambiguous.
Bounds check trap type for better security.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Increase lid used in hfi1 driver to 32 bits. qib continues
to use 16 bit lids.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add 16B bypass packet support for UD traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
When address handle attributes are initialized, the LIDs are
transformed to be in the 32 bit LID space.
When constructing the header, hfi1 driver will look at the LID
to determine the packet header to be created.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
We introduce a struct hfi1_16b_header to support 16B headers.
16B bypass packets are received by the driver and processed
similar to 9B packets. Add basic support to handle 16B packets.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
rvt_check_ah() delegates lid verification to underlying
driver. Underlying driver uses different conditions to
check for dlid depending on whether the device supports
extended LIDs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The pmtu field doens't have be stored in the QP structure
as it can easily be calculated when needed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch series primarily increases sizes of variables that hold
lid values from 16 to 32 bits. Additionally, it adds a check in
the IB mad stack to verify a properly formatted MAD when OPA
extended LIDs are used.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
drivers/infiniband/core/iwcm.c - The rdma_netlink patches in
HEAD and the iwarp cm workqueue fix (don't use WQ_MEM_RECLAIM,
we aren't safe for that context) touched the same code.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A sockaddr_in structure on the stack getting passed into rdma_ip2gid
triggers this warning, since we memcpy into a larger sockaddr_in6
structure:
In function 'memcpy',
inlined from 'rdma_ip2gid' at include/rdma/ib_addr.h:175:3,
inlined from 'addr_event.isra.4.constprop' at drivers/infiniband/core/roce_gid_mgmt.c:693:2,
inlined from 'inetaddr_event' at drivers/infiniband/core/roce_gid_mgmt.c:716:9:
include/linux/string.h:305:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
The warning seems appropriate here, but the code is also clearly
correct, so we really just want to shut up this instance of the
output.
The best way I found so far is to avoid the memcpy() call and instead
replace it with a struct assignment.
Fixes: 6974f0c4555e ("include/linux/string.h: add the option of fortified string.h functions")
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
include/rdma/ib_verbs.h - Modified a function signature adjacent
to a newly added function signature from a previous merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Both add new code
include/rdma/ib_verbs.h - Both add new code
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.
The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.
The introduction of this define allows us to remove the string size
from get_fw_str function signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The .doit callback is used by netlink core to differentiate
between get and set operations. Common convention is to use
that call for command operations like (SET, ADD, e.t.c.) and/or
access without NLF_M_DUMP flag.
This commit adds proper declaration and implementation
to RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
This patch adds static device index in similar fashion to
already available in netdev world (struct net->ifindex).
In downstream patches, the RDMA nelink will use this idx-to-ib_device
conversion, so as part of this commit, we are exposing the translation
function to be visible for IB/core users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Make ibnl_chk_listeners function to be one line by removing
unneeded comparison.
Rename that function to be complaint to other functions in RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
The pointer to netlink header was not used in the ibnl_multicast
function, so let's remove it and simplify the function
signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Netlink message header is not needed for unicast reply, hence remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
|
|
Owner field is not needed to be set because netlink is part of ib_core
which will be unloaded last after all other modules are unloaded.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
|
|
RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.
Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.
This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
|
|
Add a wait/retry version of ibnl_unicast, ibnl_unicast_wait,
and modify ibnl_unicast to not wait/retry. This eliminates
the undesirable wait for future users of ibnl_unicast.
Change Portmapper calls originating from kernel to user-space
to use ibnl_unicast_wait and take advantage of the wait/retry
logic in netlink_unicast.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
This will allow ULPs to intelligently locate threads based
on completion vector cpu affinity mappings. In case the
driver does not expose a get_vector_affinity callout, return
NULL so the caller can maintain a fallback logic.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add OPA path record support to the Connection Manager.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
slid field in struct ib_wc is increased to 32 bits.
This enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
sm_lid field in struct ib_port_attr is increased to 32 bits. This
enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
lid field in struct ib_port_attr is increased to 32 bits. This enables core
components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
OPA address handle atttibutes that have 32 bit LIDs would have to
be converted to IB address handle attribute with the LID field
programmed in the GID before copying to user space.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
A trap should be sent to the FM until the FM sends a repress message.
This is in line with the IBTA 13.4.9.
Add the ability to resend traps until a repress message is received.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael N. Henry <michael.n.henry@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
|
|
|
Enable QP creation with a given source QP number.
The created QP will use the source QPN as its wire QP number.
This comes as a pre-patch for downstream patches in this series to
allow user space applications to accelerate traffic which is typically
handled by IPoIB ULP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>
Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Work queue which is created with IB_WQ_FLAGS_DELAY_DROP won't
cause packet drops when there aren't receive WQEs, but will wait until
posting of receive WQEs or for some period of time that the device
was configured with.
It includes:
* Add a new creation flag to enable delay drop functionality in a WQ.
* A new capability was introduced - IB_RAW_PACKET_CAP_DELAY_DROP, which
is the device's ability to delay packet drops when there aren't receive
WQEs.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Logic of retrieving netdev speed from net_device and translating it to
IB speed is implemented in rxe, in usnic and in bnxt drivers.
Define new function which merges all.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Christian Benvenuti <benve@cisco.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
|
|
Once in_dev_get is called to receive in_device pointer, the
in_device reference counter is increased, but if there are
no ipv4 addresses configured on the net-device the ifa_list
will be null, resulting in a flow that doesn't call in_dev_put
to decrease the ref_cnt.
This was exposed when running RoCE over ipv6 without any ipv4
addresses configured
Fixes: commit 8e3867310c90 ("IB/cma: Fix a race condition in iboe_addr_get_sgid()")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause
overflow due to the fact that the input to the function usecs_to_jiffies
is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is
equal to or greater than 30. The consequence is unnecessarily excessive
retry and thus degradation of the system performance.
This patch fixes the problem by limiting the input to 5-bit and calling
usecs_to_jiffies() before multiplying the scaling factor.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
There are no users for IB_QP_CREATE_USE_GFP_NOIO flag,
so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The caller to the driver marks GFP_NOIO allocations with help
of memalloc_noio-* calls now. This makes redundant to pass down
to the driver gfp flags, which can be GFP_KERNEL only.
The patch removes the gfp flags argument and updates all driver paths.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch adds new function ib_modify_qp_with_udata so that
uverbs layer can avoid handling L2 mac address at verbs layer
and depend on the core layer to resolve the mac address consistently
for all required QPs.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma update from Doug Ledford:
"This includes two bugs against the newly added opa vnic that were
found by turning on the debug kernel options:
- sleeping while holding a lock, so a one line fix where they
switched it from GFP_KERNEL allocation to a GFP_ATOMIC allocation
- a case where they had an isolated caller of their code that could
call them in an atomic context so they had to switch their use of a
mutex to a spinlock to be safe, so this was considerably more lines
of diff because all uses of that lock had to be switched
In addition, the bug that was discussed with you already about an out
of bounds array access in ib_uverbs_modify_qp and ib_uverbs_create_ah
and is only seven lines of diff.
And finally, one fix to an earlier fix in the -rc cycle that broke
hfi1 and qib in regards to IPoIB (this one is, unfortunately, larger
than I would like for a -rc7 submission, but fixing the problem
required that we not treat all devices as though they had allocated a
netdev universally because it isn't true, and it took 70 lines of diff
to resolve the issue, but the final patch has been vetted by Intel and
Mellanox and they've both given their approval to the fix).
Summary:
- Two fixes for OPA found by debug kernel
- Fix for user supplied input causing kernel problems
- Fix for the IPoIB fixes submitted around -rc4"
[ Doug sent this having not noticed the 4.12 release, so I guess I'll be
getting another rdma pull request with the actuakl merge window
updates and not just fixes.
Oh well - it would have been nice if this small update had been the
merge window one. - Linus ]
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/core, opa_vnic, hfi1, mlx5: Properly free rdma_netdev
RDMA/uverbs: Check port number supplied by user verbs cmds
IB/opa_vnic: Use spinlock instead of mutex for stats_lock
IB/opa_vnic: Use GFP_ATOMIC while sending trap
|
|
IPOIB is calling free_rdma_netdev even though alloc_rdma_netdev has
returned -EOPNOTSUPP.
Move free_rdma_netdev from ib_device structure to rdma_netdev structure
thus ensuring proper cleanup function is called for the rdma net device.
Fix the following trace:
ib0: Failed to modify QP to ERROR state
BUG: unable to handle kernel paging request at 0000000000001d20
IP: hfi1_vnic_free_rn+0x26/0xb0 [hfi1]
Call Trace:
ipoib_remove_one+0xbe/0x160 [ib_ipoib]
ib_unregister_device+0xd0/0x170 [ib_core]
rvt_unregister_device+0x29/0x90 [rdmavt]
hfi1_unregister_ib_device+0x1a/0x100 [hfi1]
remove_one+0x4b/0x220 [hfi1]
pci_device_remove+0x39/0xc0
device_release_driver_internal+0x141/0x200
driver_detach+0x3f/0x80
bus_remove_driver+0x55/0xd0
driver_unregister+0x2c/0x50
pci_unregister_driver+0x2a/0xa0
hfi1_mod_cleanup+0x10/0xf65 [hfi1]
SyS_delete_module+0x171/0x250
do_syscall_64+0x67/0x150
entry_SYSCALL64_slow_path+0x25/0x25
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
- a major update for AppArmor. From JJ:
* several bug fixes and cleanups
* the patch to add symlink support to securityfs that was floated
on the list earlier and the apparmorfs changes that make use of
securityfs symlinks
* it introduces the domain labeling base code that Ubuntu has been
carrying for several years, with several cleanups applied. And it
converts the current mediation over to using the domain labeling
base, which brings domain stacking support with it. This finally
will bring the base upstream code in line with Ubuntu and provide
a base to upstream the new feature work that Ubuntu carries.
* This does _not_ contain any of the newer apparmor mediation
features/controls (mount, signals, network, keys, ...) that
Ubuntu is currently carrying, all of which will be RFC'd on top
of this.
- Notable also is the Infiniband work in SELinux, and the new file:map
permission. From Paul:
"While we're down to 21 patches for v4.13 (it was 31 for v4.12),
the diffstat jumps up tremendously with over 2k of line changes.
Almost all of these changes are the SELinux/IB work done by
Daniel Jurgens; some other noteworthy changes include a NFS v4.2
labeling fix, a new file:map permission, and reporting of policy
capabilities on policy load"
There's also now genfscon labeling support for tracefs, which was
lost in v4.1 with the separation from debugfs.
- Smack incorporates a safer socket check in file_receive, and adds a
cap_capable call in privilege check.
- TPM as usual has a bunch of fixes and enhancements.
- Multiple calls to security_add_hooks() can now be made for the same
LSM, to allow LSMs to have hook declarations across multiple files.
- IMA now supports different "ima_appraise=" modes (eg. log, fix) from
the boot command line.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (126 commits)
apparmor: put back designators in struct initialisers
seccomp: Switch from atomic_t to recount_t
seccomp: Adjust selftests to avoid double-join
seccomp: Clean up core dump logic
IMA: update IMA policy documentation to include pcr= option
ima: Log the same audit cause whenever a file has no signature
ima: Simplify policy_func_show.
integrity: Small code improvements
ima: fix get_binary_runtime_size()
ima: use ima_parse_buf() to parse template data
ima: use ima_parse_buf() to parse measurements headers
ima: introduce ima_parse_buf()
ima: Add cgroups2 to the defaults list
ima: use memdup_user_nul
ima: fix up #endif comments
IMA: Correct Kconfig dependencies for hash selection
ima: define is_ima_appraise_enabled()
ima: define Kconfig IMA_APPRAISE_BOOTPARAM option
ima: define a set of appraisal rules requiring file signatures
ima: extend the "ima_policy" boot command line to support multiple policies
...
|
|
Provide the ability for IB clients to modify the OPA specific
capability mask and include this mask in the subsequent trap data.
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Michael N. Henry <michael.n.henry@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
SGEs that are contiguous needlessly consume driver dependent TX resources.
The lkey validation logic is enhanced to compress the SGE that ends
up in the send wqe when consecutive addresses are detected.
The lkey validation API used to return 1 (success) or 0 (fail).
The return value is now an -errno, 0 (compressed), or 1 (uncompressed). A
additional argument is added to pass the last SQE for the compression.
Loopback callers always pass a NULL to last_sge since the optimization is
of little benefit in that situation.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Brian Welty <brian.welty@intel.com>
Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Improve code readablity by adding inline functions
to read specific BTH/IB fields without knowledge of
byte offsets.
Reviewed-by: Brian Welty <brian.welty@intel.com>
Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
