summaryrefslogtreecommitdiff
path: root/include/scsi/scsi_transport_sas.h
AgeCommit message (Collapse)Author
2018-01-10scsi: libsas: direct call probe and destructJason Yan
In commit 87c8331fcf72 ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling") introduced disco mutex to prevent rediscovery competing with ata error handling and put the whole revalidation in the mutex. But the rphy add/remove needs to wait for the error handling which also grabs the disco mutex. This may leads to dead lock.So the probe and destruct event were introduce to do the rphy add/remove asynchronously and out of the lock. The asynchronously processed workers makes the whole discovery process not atomic, the other events may interrupt the process. For example, if a loss of signal event inserted before the probe event, the sas_deform_port() is called and the port will be deleted. And sas_port_delete() may run before the destruct event, but the port-x:x is the top parent of end device or expander. This leads to a kernel WARNING such as: [ 82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22' [ 82.042983] ------------[ cut here ]------------ [ 82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237 sysfs_remove_group+0x94/0xa0 [ 82.043059] Call trace: [ 82.043082] [<ffff0000082e7624>] sysfs_remove_group+0x94/0xa0 [ 82.043085] [<ffff00000864e320>] dpm_sysfs_remove+0x60/0x70 [ 82.043086] [<ffff00000863ee10>] device_del+0x138/0x308 [ 82.043089] [<ffff00000869a2d0>] sas_phy_delete+0x38/0x60 [ 82.043091] [<ffff00000869a86c>] do_sas_phy_delete+0x6c/0x80 [ 82.043093] [<ffff00000863dc20>] device_for_each_child+0x58/0xa0 [ 82.043095] [<ffff000008696f80>] sas_remove_children+0x40/0x50 [ 82.043100] [<ffff00000869d1bc>] sas_destruct_devices+0x64/0xa0 [ 82.043102] [<ffff0000080e93bc>] process_one_work+0x1fc/0x4b0 [ 82.043104] [<ffff0000080e96c0>] worker_thread+0x50/0x490 [ 82.043105] [<ffff0000080f0364>] kthread+0xfc/0x128 [ 82.043107] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 Make probe and destruct a direct call in the disco and revalidate function, but put them outside the lock. The whole discovery or revalidate won't be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT event are deleted as a result of the direct call. Introduce a new list to destruct the sas_port and put the port delete after the destruct. This makes sure the right order of destroying the sysfs kobject and fix the warning above. In sas_ex_revalidate_domain() have a loop to find all broadcasted device, and sometimes we have a chance to find the same expander twice. Because the sas_port will be deleted at the end of the whole revalidate process, sas_port with the same name cannot be added before this. Otherwise the sysfs will complain of creating duplicate filename. Since the LLDD will send broadcast for every device change, we can only process one expander's revalidation. [mkp: kbuild test robot warning] Signed-off-by: Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29scsi: scsi_transport_sas: switch to bsg-lib for SMP passthroughChristoph Hellwig
Simplify the SMP passthrough code by switching it to the generic bsg-lib helpers that abstract away the details of the request code, and gets drivers out of seeing struct scsi_request. For the libsas host SMP code there is a small behavior difference in that we now always clear the residual len for successful commands, similar to the three other SMP handler implementations. Given that there is no partial command handling in the host SMP handler this should not matter in practice. [mkp: typos and checkpatch fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-18scsi: sas: remove is_sas_attached()Johannes Thumshirn
As there are no more users of is_sas_attached() left, remove it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-08-18scsi: sas: provide stub implementation for scsi_is_sas_rphyJohannes Thumshirn
Provide a stub implementation for scsi_is_sas_rphy for kernel configurations which do not have CONFIG_SCSI_SAS_ATTRS defined. Reported-by: kbuild test robot <lkp@intel.com> Suggested-by: James Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-12-18scsi_transport_sas: add function to get SAS endpoint addressJames Bottomley
For a device known to be SAS connected, this will return the endpoint address. This is useful for getting the SAS address of SATA devices. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2015-12-18scsi_transport_sas: add is_sas_attached() functionJames Bottomley
Adds a function designed to be callable any time (regardless of whether the transport attributes are configured or not) which returns true if the device is attached over a SAS transport. The design of this function is that transport specific functions can be embedded within a if (is_sas_attached(sdev)) { ... } which would be compiled out (and thus eliminate the symbols) if SAS is not configured. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2013-05-10[SCSI] sas: unify the pointlessly separated enums sas_dev_type and ↵James Bottomley
sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-12-01[SCSI] scsi_transport_sas: add 12GB definitions for mpt3sasSreekanth Reddy
[jejb: split this core change into a separate patch] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-29[SCSI] libsas: fix sas_find_local_phy(), take phy referencesDan Williams
In the direct-attached case this routine returns the phy on which this device was first discovered. Which is broken if we want to support wide-targets, as this phy reference can become stale even though the port is still active. In the expander-attached case this routine tries to lookup the phy by scanning the attached sas addresses of the parent expander, and BUG_ONs if it can't find it. However since eh and the libsas workqueue run independently we can still be attempting device recovery via eh after libsas has recorded the device as detached. This is even easier to hit now that eh is blocked while device domain rediscovery takes place, and that libata is fed more timed out commands increasing the chances that it will try to recover the ata device. Arrange for dev->phy to always point to a last known good phy, it may be stale after the port is torn down, but it will catch up for wide port reconfigurations, and never be NULL. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: perform sas-transport resets in shost->workq contextDan Williams
Extend the sas transport class to allow transport users to attach extra data to a sas_phy (->hostdata). Use this area in libsas to move resets to workq context in preparation for scheduling ata device resets through libata-eh. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19[SCSI] libsas: prevent domain rediscovery competing with ata error handlingDan Williams
libata error handling provides for a timeout for link recovery. libsas must not rescan for previously known devices in this interval otherwise it may remove a device that is simply waiting for its link to recover. Let libata-eh make the determination of when the link is stable and prevent libsas (host workqueue) from taking action while this determination is pending. Using a mutex (ha->disco_mutex) to flush and disable revalidation while eh is running requires any discovery action that may block on eh be moved to its own context outside the lock. Probing ATA devices explicitly waits on ata-eh and the cache-flush-io issued during device removal may also pend awaiting eh completion. Essentially any rphy add/remove activity needs to run outside the lock. This adds two new cleanup states for sas_unregister_domain_devices() 'allocated-but-not-probed', and 'flagged-for-destruction'. In the 'allocated-but-not-probed' state dev->rphy points to a rphy that is known to have not been through a sas_rphy_add() event. At domain teardown check if this device is still pending probe and cleanup accordingly. Similarly if a device has already been queued for removal then sas_unregister_domain_devices has nothing to do. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2010-02-08[SCSI] scsi_transport_sas: add support for transport layer retries (TLR)James Bottomley
The mpt2sas driver wants to use transport layer retries (TLR) so the simplest thing to do seems to be to add the enabling flags and checks to the SAS transport class, since they're a SAS specific protocol feature. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2008-04-19SCSI: convert struct class_device to struct deviceTony Jones
It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-11[SCSI] libsas: add host SMP processingJames Bottomley
This adds support for host side SMP processing, via a separate SMP interpreter file. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libsas: Convert sas_proto users to sas_protocolDarrick J. Wong
sparse complains about the mixing of enums in libsas. Since the underlying numeric values of both enums are the same, combine them to get rid of the warning. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-07-20[SCSI] scsi_transport_sas: add destructor for bsgJames Bottomley
There's currently no destructor for the bsg components. If you insert and remove the module, you see the bsg devices building up and up. This patch adds the destructor in the correct place in the transport class so that the bsg and request queue are removed just before the device destruction. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] transport_sas: add SAS management protocol supportFUJITA Tomonori
The sas transport class attaches one bsg device to every SAS object (host, device, expander, etc). LLDs can define a function to handle SMP requests via sas_function_template::smp_handler. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas, aic94xx: fix dma mapping cockups with ATAJames Bottomley
This one was noticed by Gilbert Wu of Adaptec: The libata core actually does the DMA mapping for you, so there has to be an exception in the device drivers that *don't* do dma mapping for ATA commands. However, since we've already done this, libsas must now dma map any ATA commands that it wishes to issue ... and yes, this is a horrible mess. Additionally, the test in aic94xx for ATA protocols isn't quite right. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-27[SCSI] libsas: Clean up discovery failure handler codeDarrick J. Wong
sas_rphy_delete does two things: it removes the sas_rphy from the transport layer and frees the sas_rphy. This can be broken down into two functions, sas_rphy_remove and sas_rphy_free; sas_rphy_remove is of interest to sas_discover_root_expander because it calls functions that require sas_rphy_add as a prerequisite and can fail (namely sas_discover_expander). In that case, sas_discover_root_expander needs to be able to undo the effects of sas_rphy_add yet leave the job of freeing the sas_rphy to the caller of sas_discover_root_expander. This patch also removes some unnecessary code from sas_discover_end_dev to eliminate an unnecessary cycle of sas_notify_lldd_gone/found for SAS devices, thus eliminating a sas_rphy_remove call (and fixing a race condition where a SCSI target scan can come in between the gone and found call). It also moves the sas_rphy_free calls into sas_discover_domain and sas_ex_discover_end_dev to complement the sas_rphy_allocation via sas_get_port_device. This patch does not change the semantics of sas_rphy_delete. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-13[SCSI] libsas: Add a sysfs knob to enable/disable a phyDarrick J. Wong
This patch lets a user arbitrarily enable or disable a phy via sysfs. Potential applications include shutting down a phy to replace one lane of wide port, and (more importantly) providing a method for the libata SATL to control the phy. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22[PATCH] aic94xx: handle REQ_DEVICE_RESETDarrick J. Wong
This patch implements a REQ_DEVICE_RESET handler for the aic94xx driver. Like the earlier REQ_TASK_ABORT patch, this patch defers the device reset to the Scsi_Host's workqueue, which has the added benefit of ensuring that the device reset does not happen at the same time that the abort tmfs are being processed. After the phy reset, the busted drive should go away and be re-detected later, which is indeed what I've seen on both a x260 and a x206m. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] scsi_transport_sas: make minimum and maximum linkrate settable quantitiesJames Bottomley
According to SPEC, the minimum_linkrate and maximum_linkrate should be settable by the user. This patch introduces a callback that allows the sas class to pass these settings on to the driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-07[SCSI] SAS: consolidate linkspeed definitionsJames Bottomley
At the moment we have two separate linkspeed enumerations covering roughly the same values. This patch consolidates on a single one enum sas_linkspeed in scsi_transport_sas.h and uses it everywhere in the aic94xx driver. Eventually I'll get around to removing the duplicated fields in asd_sas_phy and sas_phy ... Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-27[SCSI] scsi_transport_sas: remove local_attached flagJames Bottomley
This flag denotes local attachment of the phy. There are two problems with it: 1) It's actually redundant ... you can get the same information simply by seeing whether a host is the phys parent 2) we condition a lot of phy parameters on it on the false assumption that we can only control local phys. I'm wiring up phy resets in the aic94xx now, and it will be able to reset non-local phys as well. I fixed 2) by moving the local check into the reset and stats function of the mptsas, since that seems to be the only HBA that can't (currently) control non-local phys. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-12[SCSI] scsi_transport_sas: add expander backlinkJames Bottomley
This patch adds the ability to add a backlink to a particular port. The idea is to represent properly ports on expanders that are used specifically for linking to the parent device in the topology. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] scsi_transport_sas: add unindexed portsJames Bottomley
Some SAS HBAs don't want to go to the trouble of tracking port numbers, so they'd simply like to say "add this port and give it a number". This is especially beneficial from the hotplug point of view, since tracking ports and the available number space can be a real pain. The current implementation uses an incrementing number per expander to add the port on. However, since there can never be more ports than there are phys, a later implementation will try to be more intelligent about this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-06-28[SCSI] scsi_transport_sas: introduce a sas_port entityJames Bottomley
this patch introduces a port object, separates out ports and phys, with ports becoming the primary objects of the tree. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-19[SCSI] eliminate rphy allocation in favour of expander/end device allocationJames Bottomley
This allows the removal of the contained flag and also does a bit of class renaming (sas_rphy->sas_device). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-14[SCSI] add preliminary expander support to the sas transport classJames Bottomley
This patch makes expanders appear as labelled objects with properties in the SAS tree. I've also modified the phy code to make expander phys appear labelled by host number, expander number and phy index. So, for my current config, you see something like this in sysfs: /sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1 And the expander properties are: jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/ jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done component_id : 29024 component_revision_id : 4 component_vendor_id : VITESSE device : cat: device: Is a directory level : 0 product_id : VSC7160 Eval Brd product_rev : 4 uevent : cat: uevent: Permission denied vendor_id : VITESSE Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] convert aic94xx over to using the sas transport end deviceJames Bottomley
Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] add 6.0 Gbit phy definitions to the sas transport classJames Bottomley
I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] sas: add support for enclosure and bad ID rphy attributesChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] sas: add support for PHY resetsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] sas: add flag for locally attached PHYsChristoph Hellwig
Add a flag to mark a PHY as attached to the HBA as opposed to beeing on an expander. This is needed because various features are only supported on those. This is a crude hack, the proper fix would be to use different classes for host-attached vs expander phys. I'm looking into that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] scsi_transport_sas: support link error attributesChristoph Hellwig
For now supporting the ->get_linkerrors method is mandatory. I'll probably be beaten to implement the .show_foo variables and different types of attributes soon.. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-09[SCSI] SAS transport classChristoph Hellwig
The SAS transport class contains common code to deal with SAS HBAs, an aproximated representation of SAS topologies in the driver model, and various sysfs attributes to expose these topologies and managment interfaces to userspace. In addition to the basic SCSI core objects this transport class introduces two additional intermediate objects: The SAS PHY as represented by struct sas_phy defines an "outgoing" PHY on a SAS HBA or Expander, and the SAS remote PHY represented by struct sas_rphy defines an "incoming" PHY on a SAS Expander or end device. Note that this is purely a software concept, the underlying hardware for a PHY and a remote PHY is the exactly the same. There is no concept of a SAS port in this code, users can see what PHYs form a wide port based on the port_identifier attribute, which is the same for all PHYs in a port. This submission doesn't handle hot-plug addition or removal of SAS devices and thus doesn't do scanning in a workqueue yet, that will be added in phase2 after this submission. In a third phase I will add additional managment infrastructure. I think this submission is ready for 2.6.14, but additional comments are of course very welcome. I'd like to thanks James Smart a lot for his very useful input on the design. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>