| Age | Commit message (Collapse) | Author |
|---|
|
Reorder include files to alphabetic order to simplify maintenance, and
separate local headers and global headers with a blank line.
No functional change intended.
Link: https://patch.msgid.link/r/7524b037cc05afe19db3c18f863253e1d1554fa2.1722644866.git.nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Relying on position in the enum makes it subtly harder when doing merge
resolutions or backporting as it is easy to grab a patch and not notice it
is a uAPI change with a differently ordered enum. This may become a bigger
problem in next cycles when iommu_hwpt_invalidate_data_type and other
per-driver enums have patches flowing through different trees.
So lets start including constants for all the uAPI enums to make this
safer.
No functional change.
Link: https://lore.kernel.org/r/0-v1-2c06ec044924+133-iommufd_uapi_const_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The response code of IOMMUFD_PAGE_RESP_FAILURE was defined to be
equivalent to the "Response Failure" in PCI spec, section 10.4.2.1.
This response code indicates that one or more pages within the
associated request group have encountered or caused an unrecoverable
error. Therefore, this response disables the PRI at the function.
Modern I/O virtualization technologies, like SR-IOV, share PRI among
the assignable device units. Therefore, a response failure on one unit
might cause I/O failure on other units.
Remove this response code so that user space can only respond with
SUCCESS or INVALID. The VMM is recommended to emulate a failure response
as a PRI reset, or PRI disable and changing to a non-PRI domain.
Fixes: c714f15860fc ("iommufd: Add fault and response message definitions")
Link: https://lore.kernel.org/r/20240710083341.44617-2-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When allocating a user iommufd_hw_pagetable, the user space is allowed to
associate a fault object with the hw_pagetable by specifying the fault
object ID in the page table allocation data and setting the
IOMMU_HWPT_FAULT_ID_VALID flag bit.
On a successful return of hwpt allocation, the user can retrieve and
respond to page faults by reading and writing the file interface of the
fault object.
Once a fault object has been associated with a hwpt, the hwpt is
iopf-capable, indicated by hwpt->fault is non NULL. Attaching,
detaching, or replacing an iopf-capable hwpt to an RID or PASID will
differ from those that are not iopf-capable.
Link: https://lore.kernel.org/r/20240702063444.105814-9-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
An iommufd fault object provides an interface for delivering I/O page
faults to user space. These objects are created and destroyed by user
space, and they can be associated with or dissociated from hardware page
table objects during page table allocation or destruction.
User space interacts with the fault object through a file interface. This
interface offers a straightforward and efficient way for user space to
handle page faults. It allows user space to read fault messages
sequentially and respond to them by writing to the same file. The file
interface supports reading messages in poll mode, so it's recommended that
user space applications use io_uring to enhance read and write efficiency.
A fault object can be associated with any iopf-capable iommufd_hw_pgtable
during the pgtable's allocation. All I/O page faults triggered by devices
when accessing the I/O addresses of an iommufd_hw_pgtable are routed
through the fault object to user space. Similarly, user space's responses
to these page faults are routed back to the iommu device driver through
the same fault object.
Link: https://lore.kernel.org/r/20240702063444.105814-7-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommu_hwpt_pgfaults represent fault messages that the userspace can
retrieve. Multiple iommu_hwpt_pgfaults might be put in an iopf group,
with the IOMMU_PGFAULT_FLAGS_LAST_PAGE flag set only for the last
iommu_hwpt_pgfault.
An iommu_hwpt_page_response is a response message that the userspace
should send to the kernel after finishing handling a group of fault
messages. The @dev_id, @pasid, and @grpid fields in the message
identify an outstanding iopf group for a device. The @cookie field,
which matches the cookie field of the last fault in the group, will
be used by the kernel to look up the pending message.
Link: https://lore.kernel.org/r/20240702063444.105814-6-baolu.lu@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This adds the data structure invalidating caches for the nested domain
allocated with IOMMU_HWPT_DATA_VTD_S1 type.
Link: https://lore.kernel.org/r/20240111041015.47920-8-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In nested translation, the stage-1 page table is user-managed but cached
by the IOMMU hardware, so an update on present page table entries in the
stage-1 page table should be followed with a cache invalidation.
Add an IOMMU_HWPT_INVALIDATE ioctl to support such a cache invalidation.
It takes hwpt_id to specify the iommu_domain, and a multi-entry array to
support multiple invalidation data in one ioctl.
enum iommu_hwpt_invalidate_data_type is defined to tag the data type of
the entries in the multi-entry array.
Link: https://lore.kernel.org/r/20240111041015.47920-3-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
When remapping hardware is configured by system software in scalable mode
as Nested (PGTT=011b) and with PWSNP field Set in the PASID-table-entry,
it may Set Accessed bit and Dirty bit (and Extended Access bit if enabled)
in first-stage page-table entries even when second-stage mappings indicate
that corresponding first-stage page-table is Read-Only.
As the result, contents of pages designated by VMM as Read-Only can be
modified by IOMMU via PML5E (PML4E for 4-level tables) access as part of
address translation process due to DMAs issued by Guest.
This disallows read-only mappings in the domain that is supposed to be used
as nested parent. Reference from Sapphire Rapids Specification Update [1],
errata details, SPR17. Userspace should know this limitation by checking
the IOMMU_HW_INFO_VTD_ERRATA_772415_SPR17 flag reported in the IOMMU_GET_HW_INFO
ioctl.
[1] https://www.intel.com/content/www/us/en/content-details/772415/content-details.html
Link: https://lore.kernel.org/r/20231026044216.64964-9-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This adds IOMMU_HWPT_DATA_VTD_S1 for stage-1 hw_pagetable of Intel
VT-d and the corressponding data structure for userspace specified parameter
for the domain allocation.
Link: https://lore.kernel.org/r/20231026044216.64964-2-yi.l.liu@intel.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
IOMMU_HWPT_ALLOC already supports iommu_domain allocation for usersapce.
But it can only allocate a hw_pagetable that associates to a given IOAS,
i.e. only a kernel-managed hw_pagetable of IOMMUFD_OBJ_HWPT_PAGING type.
IOMMU drivers can now support user-managed hw_pagetables, for two-stage
translation use cases that require user data input from the user space.
Add a new IOMMUFD_OBJ_HWPT_NESTED type with its abort/destroy(). Pair it
with a new iommufd_hwpt_nested structure and its to_hwpt_nested() helper.
Update the to_hwpt_paging() helper, so a NESTED-type hw_pagetable can be
handled in the callers, for example iommufd_hw_pagetable_enforce_rr().
Screen the inputs including the parent PAGING-type hw_pagetable that has
a need of a new nest_parent flag in the iommufd_hwpt_paging structure.
Extend the IOMMU_HWPT_ALLOC ioctl to accept an IOMMU driver specific data
input which is tagged by the enum iommu_hwpt_data_type. Also, update the
@pt_id to accept hwpt_id too besides an ioas_id. Then, use them to allocate
a hw_pagetable of IOMMUFD_OBJ_HWPT_NESTED type using the
iommufd_hw_pagetable_alloc_nested() allocator.
Link: https://lore.kernel.org/r/20231026043938.63898-8-yi.l.liu@intel.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Co-developed-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
VFIO has an operation where it unmaps an IOVA while returning a bitmap with
the dirty data. In reality the operation doesn't quite query the IO
pagetables that the PTE was dirty or not. Instead it marks as dirty on
anything that was mapped, and doing so in one syscall.
In IOMMUFD the equivalent is done in two operations by querying with
GET_DIRTY_IOVA followed by UNMAP_IOVA. However, this would incur two TLB
flushes given that after clearing dirty bits IOMMU implementations require
invalidating their IOTLB, plus another invalidation needed for the UNMAP.
To allow dirty bits to be queried faster, add a flag
(IOMMU_HWPT_GET_DIRTY_BITMAP_NO_CLEAR) that requests to not clear the dirty
bits from the PTE (but just reading them), under the expectation that the
next operation is the unmap. An alternative is to unmap and just
perpectually mark as dirty as that's the same behaviour as today. So here
equivalent functionally can be provided with unmap alone, and if real dirty
info is required it will amortize the cost while querying.
There's still a race against DMA where in theory the unmap of the IOVA
(when the guest invalidates the IOTLB via emulated iommu) would race
against the VF performing DMA on the same IOVA. As discussed in [0], we are
accepting to resolve this race as throwing away the DMA and it doesn't
matter if it hit physical DRAM or not, the VM can't tell if we threw it
away because the DMA was blocked or because we failed to copy the DRAM.
[0] https://lore.kernel.org/linux-iommu/20220502185239.GR8364@nvidia.com/
Link: https://lore.kernel.org/r/20231024135109.73787-10-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend IOMMUFD_CMD_GET_HW_INFO op to query generic iommu capabilities for a
given device.
Capabilities are IOMMU agnostic and use device_iommu_capable() API passing
one of the IOMMU_CAP_*. Enumerate IOMMU_CAP_DIRTY_TRACKING for now in the
out_capabilities field returned back to userspace.
Link: https://lore.kernel.org/r/20231024135109.73787-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Connect a hw_pagetable to the IOMMU core dirty tracking
read_and_clear_dirty iommu domain op. It exposes all of the functionality
for the UAPI that read the dirtied IOVAs while clearing the Dirty bits from
the PTEs.
In doing so, add an IO pagetable API iopt_read_and_clear_dirty_data() that
performs the reading of dirty IOPTEs for a given IOVA range and then
copying back to userspace bitmap.
Underneath it uses the IOMMU domain kernel API which will read the dirty
bits, as well as atomically clearing the IOPTE dirty bit and flushing the
IOTLB at the end. The IOVA bitmaps usage takes care of the iteration of the
bitmaps user pages efficiently and without copies. Within the iterator
function we iterate over io-pagetable contigous areas that have been
mapped.
Contrary to past incantation of a similar interface in VFIO the IOVA range
to be scanned is tied in to the bitmap size, thus the application needs to
pass a appropriately sized bitmap address taking into account the iova
range being passed *and* page size ... as opposed to allowing bitmap-iova
!= iova.
Link: https://lore.kernel.org/r/20231024135109.73787-8-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Every IOMMU driver should be able to implement the needed iommu domain ops
to control dirty tracking.
Connect a hw_pagetable to the IOMMU core dirty tracking ops, specifically
the ability to enable/disable dirty tracking on an IOMMU domain
(hw_pagetable id). To that end add an io_pagetable kernel API to toggle
dirty tracking:
* iopt_set_dirty_tracking(iopt, [domain], state)
The intended caller of this is via the hw_pagetable object that is created.
Internally it will ensure the leftover dirty state is cleared /right
before/ dirty tracking starts. This is also useful for iommu drivers which
may decide that dirty tracking is always-enabled at boot without wanting to
toggle dynamically via corresponding iommu domain op.
Link: https://lore.kernel.org/r/20231024135109.73787-7-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Throughout IOMMU domain lifetime that wants to use dirty tracking, some
guarantees are needed such that any device attached to the iommu_domain
supports dirty tracking.
The idea is to handle a case where IOMMU in the system are assymetric
feature-wise and thus the capability may not be supported for all devices.
The enforcement is done by adding a flag into HWPT_ALLOC namely:
IOMMU_HWPT_ALLOC_DIRTY_TRACKING
.. Passed in HWPT_ALLOC ioctl() flags. The enforcement is done by creating
a iommu_domain via domain_alloc_user() and validating the requested flags
with what the device IOMMU supports (and failing accordingly) advertised).
Advertising the new IOMMU domain feature flag requires that the individual
iommu driver capability is supported when a future device attachment
happens.
Link: https://lore.kernel.org/r/20231024135109.73787-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The IOMMU_HWPT_ALLOC_NEST_PARENT flag is used to allocate a HWPT. Though
a HWPT holds a domain in the core structure, it is still quite confusing
to describe it using "domain" in the uAPI kdoc. Correct it to "HWPT".
Fixes: 4ff542163397 ("iommufd: Support allocating nested parent domain")
Link: https://lore.kernel.org/r/20231017181552.12667-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Extend IOMMU_HWPT_ALLOC to allocate domains to be used as parent (stage-2)
in nested translation.
Add IOMMU_HWPT_ALLOC_NEST_PARENT to the uAPI.
Link: https://lore.kernel.org/r/20230928071528.26258-5-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Add intel_iommu_hw_info() to report cap_reg and ecap_reg information.
Link: https://lore.kernel.org/r/20230818101033.4100-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Under nested IOMMU translation, userspace owns the stage-1 translation
table (e.g. the stage-1 page table of Intel VT-d or the context table of
ARM SMMUv3, and etc.). Stage-1 translation tables are vendor specific, and
need to be compatible with the underlying IOMMU hardware. Hence, userspace
should know the IOMMU hardware capability before creating and configuring
the stage-1 translation table to kernel.
This adds IOMMU_GET_HW_INFO ioctl to query the IOMMU hardware information
(a.k.a capability) for a given device. The returned data is vendor
specific, userspace needs to decode it with the structure by the output
@out_data_type field.
As only physical devices have IOMMU hardware, so this will return error if
the given device is not a physical device.
Link: https://lore.kernel.org/r/20230818101033.4100-4-yi.l.liu@intel.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Introduce a new iommu op to get the IOMMU hardware capabilities for
iommufd. This information will be used by any vIOMMU driver which is owned
by userspace.
This op chooses to make the special parameters opaque to the core. This
suits the current usage model where accessing any of the IOMMU device
special parameters does require a userspace driver that matches the kernel
driver. If a need for common parameters, implemented similarly by several
drivers, arises then there's room in the design to grow a generic
parameter set as well. No wrapper API is added as it is supposed to be
used by iommufd only.
Different IOMMU hardware would have different hardware information. So the
information reported differs as well. To let the external user understand
the difference, enum iommu_hw_info_type is defined. For the iommu drivers
that are capable to report hardware information, it should have a unique
iommu_hw_info_type and return to caller. For the driver doesn't report
hardware information, caller just uses IOMMU_HW_INFO_TYPE_NONE if a type
is required.
Link: https://lore.kernel.org/r/20230818101033.4100-3-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This allows userspace to manually create HWPTs on IOAS's and then use
those HWPTs as inputs to iommufd_device_attach/replace().
Following series will extend this to allow creating iommu_domains with
driver specific parameters.
Link: https://lore.kernel.org/r/17-v8-6659224517ea+532-iommufd_alloc_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
iommufd can directly implement the /dev/vfio/vfio container IOCTLs by
mapping them into io_pagetable operations.
A userspace application can test against iommufd and confirm compatibility
then simply make a small change to open /dev/iommu instead of
/dev/vfio/vfio.
For testing purposes /dev/vfio/vfio can be symlinked to /dev/iommu and
then all applications will use the compatibility path with no code
changes. A later series allows /dev/vfio/vfio to be directly provided by
iommufd, which allows the rlimit mode to work the same as well.
This series just provides the iommufd side of compatibility. Actually
linking this to VFIO_SET_CONTAINER is a followup series, with a link in
the cover letter.
Internally the compatibility API uses a normal IOAS object that, like
vfio, is automatically allocated when the first device is
attached.
Userspace can also query or set this IOAS object directly using the
IOMMU_VFIO_IOAS ioctl. This allows mixing and matching new iommufd only
features while still using the VFIO style map/unmap ioctls.
While this is enough to operate qemu, it has a few differences:
- Resource limits rely on memory cgroups to bound what userspace can do
instead of the module parameter dma_entry_limit.
- VFIO P2P is not implemented. The DMABUF patches for vfio are a start at
a solution where iommufd would import a special DMABUF. This is to avoid
further propogating the follow_pfn() security problem.
- A full audit for pedantic compatibility details (eg errnos, etc) has
not yet been done
- powerpc SPAPR is left out, as it is not connected to the iommu_domain
framework. It seems interest in SPAPR is minimal as it is currently
non-working in v6.1-rc1. They will have to convert to the iommu
subsystem framework to enjoy iommfd.
The following are not going to be implemented and we expect to remove them
from VFIO type1:
- SW access 'dirty tracking'. As discussed in the cover letter this will
be done in VFIO.
- VFIO_TYPE1_NESTING_IOMMU
https://lore.kernel.org/all/0-v1-0093c9b0e345+19-vfio_no_nesting_jgg@nvidia.com/
- VFIO_DMA_MAP_FLAG_VADDR
https://lore.kernel.org/all/Yz777bJZjTyLrHEQ@nvidia.com/
Link: https://lore.kernel.org/r/15-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Connect the IOAS to its IOCTL interface. This exposes most of the
functionality in the io_pagetable to userspace.
This is intended to be the core of the generic interface that IOMMUFD will
provide. Every IOMMU driver should be able to implement an iommu_domain
that is compatible with this generic mechanism.
It is also designed to be easy to use for simple non virtual machine
monitor users, like DPDK:
- Universal simple support for all IOMMUs (no PPC special path)
- An IOVA allocator that considers the aperture and the allowed/reserved
ranges
- io_pagetable allows any number of iommu_domains to be connected to the
IOAS
- Automatic allocation and re-use of iommu_domains
Along with room in the design to add non-generic features to cater to
specific HW functionality.
Link: https://lore.kernel.org/r/11-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is the basic infrastructure of a new miscdevice to hold the iommufd
IOCTL API.
It provides:
- A miscdevice to create file descriptors to run the IOCTL interface over
- A table based ioctl dispatch and centralized extendable pre-validation
step
- An xarray mapping userspace ID's to kernel objects. The design has
multiple inter-related objects held within in a single IOMMUFD fd
- A simple usage count to build a graph of object relations and protect
against hostile userspace racing ioctls
The only IOCTL provided in this patch is the generic 'destroy any object
by handle' operation.
Link: https://lore.kernel.org/r/6-v6-a196d26f289e+11787-iommufd_jgg@nvidia.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Lixiao Yang <lixiao.yang@intel.com>
Tested-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
