summaryrefslogtreecommitdiff
path: root/include/uapi/linux
AgeCommit message (Collapse)Author
2023-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/84e12519-04dc-bd80-bc34-8cf50d7898ce@intel.com/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/20231211110022.27926ad9@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/20231214113041.3a0c003c@canb.auug.org.au/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/20231211110328.76c925af@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: add support for symmetric-xor RSS hashAhmed Zaki
Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac5.c drivers/net/ethernet/stmicro/stmmac/dwmac5.h drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c drivers/net/ethernet/stmicro/stmmac/hwif.h 37e4b8df27bc ("net: stmmac: fix FPE events losing") c3f3b97238f6 ("net: stmmac: Refactor EST implementation") https://lore.kernel.org/all/20231206110306.01e91114@canb.auug.org.au/ Adjacent changes: net/ipv4/tcp_ao.c 9396c4ee93f9 ("net/tcp: Don't store TCP-AO maclen on reqsk") 7b0f570f879a ("tcp: Move TCP-AO bits from cookie_v[46]_check() to tcp_ao_syncookie().") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-05net: bridge: add document for IFLA_BRPORT enumHangbin Liu
Add document for IFLA_BRPORT enum so we can use it in Documentation/networking/bridge.rst. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-05net: bridge: add document for IFLA_BR enumHangbin Liu
Add document for IFLA_BR enum so we can use it in Documentation/networking/bridge.rst. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-04netdev-genl: spec: Add PID in netdev netlink YAML specAmritha Nambiar
Add support in netlink spec(netdev.yaml) for PID of the NAPI thread. Add code generated from the spec. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147335301.5260.11872351477120434501.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04netdev-genl: spec: Add irq in netdev netlink YAML specAmritha Nambiar
Add support in netlink spec(netdev.yaml) for interrupt number among the NAPI attributes. Add code generated from the spec. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147334210.5260.18178387869057516983.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04netdev-genl: spec: Extend netdev netlink spec in YAML for NAPIAmritha Nambiar
Add support in netlink spec(netdev.yaml) for napi related information. Add code generated from the spec. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147333119.5260.7050639053080529108.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04netdev-genl: spec: Extend netdev netlink spec in YAML for queueAmritha Nambiar
Add support in netlink spec(netdev.yaml) for queue information. Add code generated from the spec. Note: The "queue-type" attribute takes values 0 and 1 for rx and tx queue type respectively. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147330963.5260.2576294626647300472.stgit@anambiarhost.jf.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04tcp: Dump bound-only sockets in inet_diag.Guillaume Nault
Walk the hashinfo->bhash2 table so that inet_diag can dump TCP sockets that are bound but haven't yet called connect() or listen(). The code is inspired by the ->lhash2 loop. However there's no manual test of the source port, since this kind of filtering is already handled by inet_diag_bc_sk(). Also, a maximum of 16 sockets are dumped at a time, to avoid running with bh disabled for too long. There's no TCP state for bound but otherwise inactive sockets. Such sockets normally map to TCP_CLOSE. However, "ss -l", which is supposed to only dump listening sockets, actually requests the kernel to dump sockets in either the TCP_LISTEN or TCP_CLOSE states. To avoid dumping bound-only sockets with "ss -l", we therefore need to define a new pseudo-state (TCP_BOUND_INACTIVE) that user space will be able to set explicitly. With an IPv4, an IPv6 and an IPv6-only socket, bound respectively to 40000, 64000, 60000, an updated version of iproute2 could work as follow: $ ss -t state bound-inactive Recv-Q Send-Q Local Address:Port Peer Address:Port Process 0 0 0.0.0.0:40000 0.0.0.0:* 0 0 [::]:60000 [::]:* 0 0 *:64000 *:* Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/b3a84ae61e19c06806eea9c602b3b66e8f0cfc81.1701362867.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-04fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAPTyler Fanelli
Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its description indicates a purpose of reducing memory footprint. This may imply that it could be further used to relax other DIRECT_IO operations in the future. Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing, allow shared mmap of DIRECT_IO files while still bypassing the cache on regular reads and writes. [Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility. Signed-off-by: Tyler Fanelli <tfanelli@redhat.com> Fixes: e78662e818f9 ("fuse: add a new fuse init flag to relax restrictions in no cache mode") Cc: <stable@vger.kernel.org> # v6.6 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2023-12-01Merge tag 'hardening-v6.7-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - struct_group: propagate attributes to top-level union (Dmitry Antipov) - gcc-plugins: randstruct: Update code comment in relayout_struct (Gustavo A. R. Silva) - MAINTAINERS: refresh LLVM support (Nick Desaulniers) * tag 'hardening-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: randstruct: Update code comment in relayout_struct() uapi: propagate __struct_group() attributes to the container union MAINTAINERS: refresh LLVM support
2023-11-30Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-11-30 We've added 30 non-merge commits during the last 7 day(s) which contain a total of 58 files changed, 1598 insertions(+), 154 deletions(-). The main changes are: 1) Add initial TX metadata implementation for AF_XDP with support in mlx5 and stmmac drivers. Two types of offloads are supported right now, that is, TX timestamp and TX checksum offload, from Stanislav Fomichev with stmmac implementation from Song Yoong Siang. 2) Change BPF verifier logic to validate global subprograms lazily instead of unconditionally before the main program, so they can be guarded using BPF CO-RE techniques, from Andrii Nakryiko. 3) Add BPF link_info support for uprobe multi link along with bpftool integration for the latter, from Jiri Olsa. 4) Use pkg-config in BPF selftests to determine ld flags which is in particular needed for linking statically, from Akihiko Odaki. 5) Fix a few BPF selftest failures to adapt to the upcoming LLVM18, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (30 commits) bpf/tests: Remove duplicate JSGT tests selftests/bpf: Add TX side to xdp_hw_metadata selftests/bpf: Convert xdp_hw_metadata to XDP_USE_NEED_WAKEUP selftests/bpf: Add TX side to xdp_metadata selftests/bpf: Add csum helpers selftests/xsk: Support tx_metadata_len xsk: Add option to calculate TX checksum in SW xsk: Validate xsk_tx_metadata flags xsk: Document tx_metadata_len layout net: stmmac: Add Tx HWTS support to XDP ZC net/mlx5e: Implement AF_XDP TX timestamp and checksum offload tools: ynl: Print xsk-features from the sample xsk: Add TX timestamp and TX checksum offload support xsk: Support tx_metadata_len selftests/bpf: Use pkg-config for libelf selftests/bpf: Override PKG_CONFIG for static builds selftests/bpf: Choose pkg-config for the target bpftool: Add support to display uprobe_multi links selftests/bpf: Add link_info test for uprobe_multi link selftests/bpf: Use bpf_link__destroy in fill_link_info tests ... ==================== Conflicts: Documentation/netlink/specs/netdev.yaml: 839ff60df3ab ("net: page_pool: add nlspec for basic access to page pools") 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") https://lore.kernel.org/all/20231201094705.1ee3cab8@canb.auug.org.au/ While at it also regen, tree is dirty after: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") looks like code wasn't re-rendered after "render-max" was removed. Link: https://lore.kernel.org/r/20231130145708.32573-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29mptcp: add mptcpi_subflows_total counterGeliang Tang
If the initial subflow has been removed, we cannot know without checking other counters, e.g. ss -ti <filter> | grep -c tcp-ulp-mptcp or getsockopt(SOL_MPTCP, MPTCP_FULL_INFO, ...) (or others except MPTCP_INFO of course) and then check mptcp_subflow_data->num_subflows to get the total amount of subflows. This patch adds a new counter mptcpi_subflows_total in mptcpi_flags to store the total amount of subflows, including the initial one. A new helper __mptcp_has_initial_subflow() is added to check whether the initial subflow has been removed or not. With this helper, we can then compute the total amount of subflows from mptcp_info by doing something like: mptcpi_subflows_total = mptcpi_subflows + __mptcp_has_initial_subflow(msk). Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/428 Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-1-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29xsk: Add option to calculate TX checksum in SWStanislav Fomichev
For XDP_COPY mode, add a UMEM option XDP_UMEM_TX_SW_CSUM to call skb_checksum_help in transmit path. Might be useful to debugging issues with real hardware. I also use this mode in the selftests. Signed-off-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20231127190319.1190813-9-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-29xsk: Add TX timestamp and TX checksum offload supportStanislav Fomichev
This change actually defines the (initial) metadata layout that should be used by AF_XDP userspace (xsk_tx_metadata). The first field is flags which requests appropriate offloads, followed by the offload-specific fields. The supported per-device offloads are exported via netlink (new xsk-flags). The offloads themselves are still implemented in a bit of a framework-y fashion that's left from my initial kfunc attempt. I'm introducing new xsk_tx_metadata_ops which drivers are supposed to implement. The drivers are also supposed to call xsk_tx_metadata_request/xsk_tx_metadata_complete in the right places. Since xsk_tx_metadata_{request,_complete} are static inline, we don't incur any extra overhead doing indirect calls. The benefit of this scheme is as follows: - keeps all metadata layout parsing away from driver code - makes it easy to grep and see which drivers implement what - don't need any extra flags to maintain to keep track of what offloads are implemented; if the callback is implemented - the offload is supported (used by netlink reporting code) Two offloads are defined right now: 1. XDP_TXMD_FLAGS_CHECKSUM: skb-style csum_start+csum_offset 2. XDP_TXMD_FLAGS_TIMESTAMP: writes TX timestamp back into metadata area upon completion (tx_timestamp field) XDP_TXMD_FLAGS_TIMESTAMP is also implemented for XDP_COPY mode: it writes SW timestamp from the skb destructor (note I'm reusing hwtstamps to pass metadata pointer). The struct is forward-compatible and can be extended in the future by appending more fields. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-3-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-29xsk: Support tx_metadata_lenStanislav Fomichev
For zerocopy mode, tx_desc->addr can point to an arbitrary offset and carry some TX metadata in the headroom. For copy mode, there is no way currently to populate skb metadata. Introduce new tx_metadata_len umem config option that indicates how many bytes to treat as metadata. Metadata bytes come prior to tx_desc address (same as in RX case). The size of the metadata has mostly the same constraints as XDP: - less than 256 bytes - 8-byte aligned (compared to 4-byte alignment on xdp, due to 8-byte timestamp in the completion) - non-zero This data is not interpreted in any way right now. Reviewed-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20231127190319.1190813-2-sdf@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-28bpf: Add link_info support for uprobe multi linkJiri Olsa
Adding support to get uprobe_link details through bpf_link_info interface. Adding new struct uprobe_multi to struct bpf_link_info to carry the uprobe_multi link details. The uprobe_multi.count is passed from user space to denote size of array fields (offsets/ref_ctr_offsets/cookies). The actual array size is stored back to uprobe_multi.count (allowing user to find out the actual array size) and array fields are populated up to the user passed size. All the non-array fields (path/count/flags/pid) are always set. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20231125193130.834322-4-jolsa@kernel.org
2023-11-28net: page_pool: expose page pool stats via netlinkJakub Kicinski
Dump the stats into netlink. More clever approaches like dumping the stats per-CPU for each CPU individually to see where the packets get consumed can be implemented in the future. A trimmed example from a real (but recently booted system): $ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \ --dump page-pool-stats-get [{'info': {'id': 19, 'ifindex': 2}, 'alloc-empty': 48, 'alloc-fast': 3024, 'alloc-refill': 0, 'alloc-slow': 48, 'alloc-slow-high-order': 0, 'alloc-waive': 0, 'recycle-cache-full': 0, 'recycle-cached': 0, 'recycle-released-refcnt': 0, 'recycle-ring': 0, 'recycle-ring-full': 0}, {'info': {'id': 18, 'ifindex': 2}, 'alloc-empty': 66, 'alloc-fast': 11811, 'alloc-refill': 35, 'alloc-slow': 66, 'alloc-slow-high-order': 0, 'alloc-waive': 0, 'recycle-cache-full': 1145, 'recycle-cached': 6541, 'recycle-released-refcnt': 0, 'recycle-ring': 1275, 'recycle-ring-full': 0}, {'info': {'id': 17, 'ifindex': 2}, 'alloc-empty': 73, 'alloc-fast': 62099, 'alloc-refill': 413, ... Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28net: page_pool: report when page pool was destroyedJakub Kicinski
Report when page pool was destroyed. Together with the inflight / memory use reporting this can serve as a replacement for the warning about leaked page pools we currently print to dmesg. Example output for a fake leaked page pool using some hacks in netdevsim (one "live" pool, and one "leaked" on the same dev): $ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \ --dump page-pool-get [{'id': 2, 'ifindex': 3}, {'id': 1, 'ifindex': 3, 'destroyed': 133, 'inflight': 1}] Tested-by: Dragos Tatulea <dtatulea@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28net: page_pool: report amount of memory held by page poolsJakub Kicinski
Advanced deployments need the ability to check memory use of various system components. It makes it possible to make informed decisions about memory allocation and to find regressions and leaks. Report memory use of page pools. Report both number of references and bytes held. Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28net: page_pool: add netlink notifications for state changesJakub Kicinski
Generate netlink notifications about page pool state changes. Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-28net: page_pool: implement GET in the netlink APIJakub Kicinski
Expose the very basic page pool information via netlink. Example using ynl-py for a system with 9 queues: $ ./cli.py --no-schema --spec netlink/specs/netdev.yaml \ --dump page-pool-get [{'id': 19, 'ifindex': 2, 'napi-id': 147}, {'id': 18, 'ifindex': 2, 'napi-id': 146}, {'id': 17, 'ifindex': 2, 'napi-id': 145}, {'id': 16, 'ifindex': 2, 'napi-id': 144}, {'id': 15, 'ifindex': 2, 'napi-id': 143}, {'id': 14, 'ifindex': 2, 'napi-id': 142}, {'id': 13, 'ifindex': 2, 'napi-id': 141}, {'id': 12, 'ifindex': 2, 'napi-id': 140}, {'id': 11, 'ifindex': 2, 'napi-id': 139}, {'id': 10, 'ifindex': 2, 'napi-id': 138}] Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-27Merge tag 'wireless-next-2023-11-27' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.8 The first features pull request for v6.8. Not so big in number of commits but we removed quite a few ancient drivers: libertas 16-bit PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and rndis_wlan. Major changes: cfg80211/mac80211 - extend support for scanning while Multi-Link Operation (MLO) connected * tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits) wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event wifi: mac80211: Extend support for scanning while MLO connected wifi: cfg80211: Extend support for scanning while MLO connected wifi: ieee80211: fix PV1 frame control field name rfkill: return ENOTTY on invalid ioctl MAINTAINERS: update iwlwifi maintainers wifi: rtw89: 8922a: read efuse content from physical map wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels wifi: rtw89: mac: add to access efuse for WiFi 7 chips wifi: rtw89: mac: use mac_gen pointer to access about efuse wifi: rtw89: 8922a: add 8922A basic chip info wifi: rtlwifi: drop unused const_amdpci_aspm wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable wifi: rtw89: regd: update regulatory map to R65-R44 wifi: rtw89: regd: handle policy of 6 GHz according to BIOS wifi: rtw89: acpi: process 6 GHz band policy from DSM wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start() wifi: rtw89: pci: update interrupt mitigation register for 8922AE wifi: rtw89: pci: correct interrupt mitigation register for 8852CE ... ==================== Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-27Merge tag 'media/v6.7-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab. * tag 'media/v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: pci: mgb4: add COMMON_CLK dependency media: v4l2-subdev: Fix a 64bit bug media: mgb4: Added support for T200 card variant media: vsp1: Remove unbalanced .s_stream(0) calls
2023-11-27uapi: propagate __struct_group() attributes to the container unionDmitry Antipov
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON() in an old and unmaintained wil6210 wireless driver. The problem comes from the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example, the following structure is packed to 18 bytes instead of 16: struct poorly_packed { unsigned int a; unsigned int b; unsigned short c; union { struct { unsigned short d; unsigned int e; } __attribute__((packed)); struct { unsigned short d; unsigned int e; } __attribute__((packed)) inner; }; } __attribute__((packed)); To fit it into 16 bytes, it's required to add packed attribute to the container union as well: struct poorly_packed { unsigned int a; unsigned int b; unsigned short c; union { struct { unsigned short d; unsigned int e; } __attribute__((packed)); struct { unsigned short d; unsigned int e; } __attribute__((packed)) inner; } __attribute__((packed)); } __attribute__((packed)); Thanks to Andrew Pinski of GCC team for sorting the things out at https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru Fixes: 50d7bd38c3aa ("stddef: Introduce struct_group() helper macro") Signed-off-by: Kees Cook <keescook@chromium.org>
2023-11-24wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED eventVinayak Yadawad
Drivers supporting 4-way handshake offload for AP/P2p-GO and STA/P2P-client should use this event to indicate that port has been authorized and open for regular data traffic, sending this event on completion of successful 4-way handshake. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/f746b59f41436e9df29c24688035fbc6eb91ab06.1699510229.git.vinayak.yadawad@broadcom.com [rewrite it all to not use the term 'GC' that we don't use in place of P2P-client] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24wifi: cfg80211: Extend support for scanning while MLO connectedIlan Peer
To extend the support of TSF accounting in scan results for MLO connections, allow to indicate in the scan request the link ID corresponding to the BSS whose TSF should be used for the TSF accounting. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20231113112844.d4490bcdefb1.I8fcd158b810adddef4963727e9153096416b30ce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-11-24Merge tag 'vfs-6.7-rc3.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Avoid calling back into LSMs from vfs_getattr_nosec() calls. IMA used to query inode properties accessing raw inode fields without dedicated helpers. That was finally fixed a few releases ago by forcing IMA to use vfs_getattr_nosec() helpers. The goal of the vfs_getattr_nosec() helper is to query for attributes without calling into the LSM layer which would be quite problematic because incredibly IMA is called from __fput()... __fput() -> ima_file_free() What it does is to call back into the filesystem to update the file's IMA xattr. Querying the inode without using vfs_getattr_nosec() meant that IMA didn't handle stacking filesystems such as overlayfs correctly. So the switch to vfs_getattr_nosec() is quite correct. But the switch to vfs_getattr_nosec() revealed another bug when used on stacking filesystems: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() -> security_inode_getattr() # calls back into LSMs Now, if that __fput() happens from task_work_run() of an exiting task current->fs and various other pointer could already be NULL. So anything in the LSM layer relying on that not being NULL would be quite surprised. Fix that by passing the information that this is a security request through to the stacking filesystem by adding a new internal ATT_GETATTR_NOSEC flag. Now the callchain becomes: __fput() -> ima_file_free() -> vfs_getattr_nosec() -> i_op->getattr::ovl_getattr() -> if (AT_GETATTR_NOSEC) vfs_getattr_nosec() else vfs_getattr() -> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr() - Fix a bug introduced with the iov_iter rework from last cycle. This broke /proc/kcore by copying too much and without the correct offset. - Add a missing NULL check when allocating the root inode in autofs_fill_super(). - Fix stable writes for multi-device filesystems (xfs, btrfs etc) and the block device pseudo filesystem. Stable writes used to be a superblock flag only, making it a per filesystem property. Add an additional AS_STABLE_WRITES mapping flag to allow for fine-grained control. - Ensure that offset_iterate_dir() returns 0 after reaching the end of a directory so it adheres to getdents() convention. * tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: libfs: getdents() should return 0 after reaching EOD xfs: respect the stable writes flag on the RT device xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags block: update the stable_writes flag in bdev_add filemap: add a per-mapping stable writes flag autofs: add: new_inode check in autofs_fill_super() iov_iter: fix copy_page_to_iter_nofault() fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
2023-11-21Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-11-21 We've added 85 non-merge commits during the last 12 day(s) which contain a total of 63 files changed, 4464 insertions(+), 1484 deletions(-). The main changes are: 1) Huge batch of verifier changes to improve BPF register bounds logic and range support along with a large test suite, and verifier log improvements, all from Andrii Nakryiko. 2) Add a new kfunc which acquires the associated cgroup of a task within a specific cgroup v1 hierarchy where the latter is identified by its id, from Yafang Shao. 3) Extend verifier to allow bpf_refcount_acquire() of a map value field obtained via direct load which is a use-case needed in sched_ext, from Dave Marchevsky. 4) Fix bpf_get_task_stack() helper to add the correct crosstask check for the get_perf_callchain(), from Jordan Rome. 5) Fix BPF task_iter internals where lockless usage of next_thread() was wrong. The rework also simplifies the code, from Oleg Nesterov. 6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another fix for certain BPF UAPI structs to fix verifier failures seen in bpf_dynptr usage, from Yonghong Song. 7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF memory allocator not being able to allocate per-CPU pointer successfully, from Hou Tao. 8) Add prep work around dynptr and string handling for kfuncs which is later going to be used by file verification via BPF LSM and fsverity, from Song Liu. 9) Improve BPF selftests to update multiple prog_tests to use ASSERT_* macros, from Yuran Pereira. 10) Optimize LPM trie lookup to check prefixlen before walking the trie, from Florian Lehner. 11) Consolidate virtio/9p configs from BPF selftests in config.vm file given they are needed consistently across archs, from Manu Bretelle. 12) Small BPF verifier refactor to remove register_is_const(), from Shung-Hsi Yu. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits) selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca selftests/bpf: reduce verboseness of reg_bounds selftest logs bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos) bpf: bpf_iter_task_next: use __next_thread() rather than next_thread() bpf: task_group_seq_get_next: use __next_thread() rather than next_thread() bpf: emit frameno for PTR_TO_STACK regs if it differs from current one bpf: smarter verifier log number printing logic bpf: omit default off=0 and imm=0 in register state log bpf: emit map name in register state if applicable and available bpf: print spilled register state in stack slot bpf: extract register state printing bpf: move verifier state printing code to kernel/bpf/log.c bpf: move verbose_linfo() into kernel/bpf/log.c bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS bpf: Remove test for MOVSX32 with offset=32 selftests/bpf: add iter test requiring range x range logic veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag ... ==================== Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-18net: partial revert of the "Make timestamping selectable: seriesJakub Kicinski
Revert following commits: commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask") commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer") commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp") commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers") commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers") commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer") commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC") commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp") commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable") commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command") They need more time for reviews. Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-18Merge tag 'batadv-next-pullrequest-20231115' of ↵David S. Miller
git://git.open-mesh.org/linux-merge This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - Implement new multicast packet type, including its transmission, forwarding and parsing, by Linus Lüssing (3 patches) - Switch to new headers for sprintf and array size, by Sven Eckelmann (2 patches) Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net: ethtool: ts: Let the active time stamping layer be selectableKory Maincent
Now that the current timestamp is saved in a variable lets add the ETHTOOL_MSG_TS_SET ethtool netlink socket to make it selectable. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net: ethtool: Add a command to list available time stamping layersKory Maincent
Introduce a new netlink message that lists all available time stamping layers on a given interface. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net: ethtool: Add a command to expose current time stamping layerKory Maincent
Time stamping on network packets may happen either in the MAC or in the PHY, but not both. In preparation for making the choice selectable, expose both the current layers via ethtool. In accordance with the kernel implementation as it stands, the current layer will always read as "phy" when a PHY time stamping device is present. Future patches will allow changing the current layer administratively. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE maskKory Maincent
Timestamping software or hardware flags are often used as a group, therefore adding these masks will easier future use. I did not use SOF_TIMESTAMPING_SYS_HARDWARE flag as it is deprecated and not use at all. Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18fs: Pass AT_GETATTR_NOSEC flag to getattr interface functionStefan Berger
When vfs_getattr_nosec() calls a filesystem's getattr interface function then the 'nosec' should propagate into this function so that vfs_getattr_nosec() can again be called from the filesystem's gettattr rather than vfs_getattr(). The latter would add unnecessary security checks that the initial vfs_getattr_nosec() call wanted to avoid. Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass with the new getattr_flags parameter to the getattr interface function. In overlayfs and ecryptfs use this flag to determine which one of the two functions to call. In a recent code change introduced to IMA vfs_getattr_nosec() ended up calling vfs_getattr() in overlayfs, which in turn called security_inode_getattr() on an exiting process that did not have current->fs set anymore, which then caused a kernel NULL pointer dereference. With this change the call to security_inode_getattr() can be avoided, thus avoiding the NULL pointer dereference. Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com> Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version") Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <linux-fsdevel@vger.kernel.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Tyler Hicks <code@tyhicks.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Suggested-by: Christian Brauner <brauner@kernel.org> Co-developed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-17bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTSAndrii Nakryiko
Rename verifier internal flag BPF_F_TEST_SANITY_STRICT to more neutral BPF_F_TEST_REG_INVARIANTS. This is a follow up to [0]. A few selftests and veristat need to be adjusted in the same patch as well. [0] https://patchwork.kernel.org/project/netdevbpf/patch/20231112010609.848406-5-andrii@kernel.org/ Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231117171404.225508-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-16vxlan: add support for flowlabel inheritAlce Lafranque
By default, VXLAN encapsulation over IPv6 sets the flow label to 0, with an option for a fixed value. This commits add the ability to inherit the flow label from the inner packet, like for other tunnel implementations. This enables devices using only L3 headers for ECMP to correctly balance VXLAN-encapsulated IPv6 packets. ``` $ ./ip/ip link add dummy1 type dummy $ ./ip/ip addr add 2001:db8::2/64 dev dummy1 $ ./ip/ip link set up dev dummy1 $ ./ip/ip link add vxlan1 type vxlan id 100 flowlabel inherit remote 2001:db8::1 local 2001:db8::2 $ ./ip/ip link set up dev vxlan1 $ ./ip/ip addr add 2001:db8:1::2/64 dev vxlan1 $ ./ip/ip link set arp off dev vxlan1 $ ping -q 2001:db8:1::1 & $ tshark -d udp.port==8472,vxlan -Vpni dummy1 -c1 [...] Internet Protocol Version 6, Src: 2001:db8::2, Dst: 2001:db8::1 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... 1011 0001 1010 1111 1011 = Flow Label: 0xb1afb [...] Virtual eXtensible Local Area Network Flags: 0x0800, VXLAN Network ID (VNI) Group Policy ID: 0 VXLAN Network Identifier (VNI): 100 [...] Internet Protocol Version 6, Src: 2001:db8:1::2, Dst: 2001:db8:1::1 0110 .... = Version: 6 .... 0000 0000 .... .... .... .... .... = Traffic Class: 0x00 (DSCP: CS0, ECN: Not-ECT) .... 0000 00.. .... .... .... .... .... = Differentiated Services Codepoint: Default (0) .... .... ..00 .... .... .... .... .... = Explicit Congestion Notification: Not ECN-Capable Transport (0) .... 1011 0001 1010 1111 1011 = Flow Label: 0xb1afb ``` Signed-off-by: Alce Lafranque <alce@lafranque.net> Co-developed-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Vincent Bernat <vincent@bernat.ch> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-16media: v4l2-subdev: Fix a 64bit bugDan Carpenter
The problem is this line here from subdev_do_ioctl(). client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS; The "client_cap->capabilities" variable is a u64. The AND operation is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But because it's a 32 bit variable it accidentally clears out the high 32 bits as well. Currently we only use the first bit and none of the upper bits so this doesn't affect runtime behavior. Fixes: f57fa2959244 ("media: v4l2-subdev: Add new ioctl for client capabilities") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-11-16Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio fixes from Michael Tsirkin: "Bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: fix use after free in vhost_vdpa_probe() virtio_pci: Switch away from deprecated irq_set_affinity_hint riscv, qemu_fw_cfg: Add support for RISC-V architecture vdpa_sim_blk: allocate the buffer zeroed virtio_pci: move structure to a header
2023-11-15bpf: add register bounds sanity checks and sanitizationAndrii Nakryiko
Add simple sanity checks that validate well-formed ranges (min <= max) across u64, s64, u32, and s32 ranges. Also for cases when the value is constant (either 64-bit or 32-bit), we validate that ranges and tnums are in agreement. These bounds checks are performed at the end of BPF_ALU/BPF_ALU64 operations, on conditional jumps, and for LDX instructions (where subreg zero/sign extension is probably the most important to check). This covers most of the interesting cases. Also, we validate the sanity of the return register when manually adjusting it for some special helpers. By default, sanity violation will trigger a warning in verifier log and resetting register bounds to "unbounded" ones. But to aid development and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will trigger hard failure of verification with -EFAULT on register bounds violations. This allows selftests to catch such issues. veristat will also gain a CLI option to enable this behavior. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com> Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-14batman-adv: mcast: implement multicast packet reception and forwardingLinus Lüssing
Implement functionality to receive and forward a new TVLV capable multicast packet type. The new batman-adv multicast packet type allows to contain several originator destination addresses within a TVLV. Routers on the way will potentially split the batman-adv multicast packet and adjust its tracker TVLV contents. Routing decisions are still based on the selected BATMAN IV or BATMAN V routing algorithm. So this new batman-adv multicast packet type retains the same loop-free properties. Also a new OGM multicast TVLV flag is introduced to signal to other nodes that we are capable of handling a batman-adv multicast packet and multicast tracker TVLV. And that all of our hard interfaces have an MTU of at least 1280 bytes (IPv6 minimum MTU), as a simple solution for now to avoid MTU issues while forwarding. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2023-11-13Merge tag 'for-6.7-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - fix potential overflow in returned value from SEARCH_TREE_V2 ioctl on 32bit architecture - zoned mode fixes: - drop unnecessary write pointer check for RAID0/RAID1/RAID10 profiles, now it works because of raid-stripe-tree - wait for finishing the zone when direct IO needs a new allocation - simple quota fixes: - pass correct owning root pointer when cleaning up an aborted transaction - fix leaking some structures when processing delayed refs - change key type number of BTRFS_EXTENT_OWNER_REF_KEY, reorder it before inline refs that are supposed to be sorted, keeping the original number would complicate a lot of things; this change needs an updated version of btrfs-progs to work and filesystems need to be recreated - fix error pointer dereference after failure to allocate fs devices - fix race between accounting qgroup extents and removing a qgroup * tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: make OWNER_REF_KEY type value smallest among inline refs btrfs: fix qgroup record leaks when using simple quotas btrfs: fix race between accounting qgroup extents and removing a qgroup btrfs: fix error pointer dereference after failure to allocate fs devices btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe() btrfs: get correct owning_root when dropping snapshot btrfs: zoned: wait for data BG to be finished on direct IO allocation btrfs: zoned: drop no longer valid write pointer check btrfs: directly return 0 on no error code in btrfs_insert_raid_extent() btrfs: use u64 for buffer sizes in the tree search ioctls
2023-11-10bpf: Add crosstask check to __bpf_get_stackJordan Rome
Currently get_perf_callchain only supports user stack walking for the current task. Passing the correct *crosstask* param will return 0 frames if the task passed to __bpf_get_stack isn't the current one instead of a single incorrect frame/address. This change passes the correct *crosstask* param but also does a preemptive check in __bpf_get_stack if the task is current and returns -EOPNOTSUPP if it is not. This issue was found using bpf_get_task_stack inside a BPF iterator ("iter/task"), which iterates over all tasks. bpf_get_task_stack works fine for fetching kernel stacks but because get_perf_callchain relies on the caller to know if the requested *task* is the current one (via *crosstask*) it was failing in a confusing way. It might be possible to get user stacks for all tasks utilizing something like access_process_vm but that requires the bpf program calling bpf_get_task_stack to be sleepable and would therefore be a breaking change. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Signed-off-by: Jordan Rome <jordalgo@meta.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com
2023-11-09bpf: Use named fields for certain bpf uapi structsYonghong Song
Martin and Vadim reported a verifier failure with bpf_dynptr usage. The issue is mentioned but Vadim workarounded the issue with source change ([1]). The below describes what is the issue and why there is a verification failure. int BPF_PROG(skb_crypto_setup) { struct bpf_dynptr algo, key; ... bpf_dynptr_from_mem(..., ..., 0, &algo); ... } The bpf program is using vmlinux.h, so we have the following definition in vmlinux.h: struct bpf_dynptr { long: 64; long: 64; }; Note that in uapi header bpf.h, we have struct bpf_dynptr { long: 64; long: 64; } __attribute__((aligned(8))); So we lost alignment information for struct bpf_dynptr by using vmlinux.h. Let us take a look at a simple program below: $ cat align.c typedef unsigned long long __u64; struct bpf_dynptr_no_align { __u64 :64; __u64 :64; }; struct bpf_dynptr_yes_align { __u64 :64; __u64 :64; } __attribute__((aligned(8))); void bar(void *, void *); int foo() { struct bpf_dynptr_no_align a; struct bpf_dynptr_yes_align b; bar(&a, &b); return 0; } $ clang --target=bpf -O2 -S -emit-llvm align.c Look at the generated IR file align.ll: ... %a = alloca %struct.bpf_dynptr_no_align, align 1 %b = alloca %struct.bpf_dynptr_yes_align, align 8 ... The compiler dictates the alignment for struct bpf_dynptr_no_align is 1 and the alignment for struct bpf_dynptr_yes_align is 8. So theoretically compiler could allocate variable %a with alignment 1 although in reallity the compiler may choose a different alignment by considering other local variables. In [1], the verification failure happens because variable 'algo' is allocated on the stack with alignment 4 (fp-28). But the verifer wants its alignment to be 8. To fix the issue, the RFC patch ([1]) tried to add '__attribute__((aligned(8)))' to struct bpf_dynptr plus other similar structs. Andrii suggested that we could directly modify uapi struct with named fields like struct 'bpf_iter_num': struct bpf_iter_num { /* opaque iterator state; having __u64 here allows to preserve correct * alignment requirements in vmlinux.h, generated from BTF */ __u64 __opaque[1]; } __attribute__((aligned(8))); Indeed, adding named fields for those affected structs in this patch can preserve alignment when bpf program references them in vmlinux.h. With this patch, the verification failure in [1] can also be resolved. [1] https://lore.kernel.org/bpf/1b100f73-7625-4c1f-3ae5-50ecf84d3ff0@linux.dev/ [2] https://lore.kernel.org/bpf/20231103055218.2395034-1-yonghong.song@linux.dev/ Cc: Vadim Fedorenko <vadfed@meta.com> Cc: Martin KaFai Lau <martin.lau@linux.dev> Suggested-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231104024900.1539182-1-yonghong.song@linux.dev Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-11-09Merge tag 'net-6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and bpf. Current release - regressions: - sched: fix SKB_NOT_DROPPED_YET splat under debug config Current release - new code bugs: - tcp: - fix usec timestamps with TCP fastopen - fix possible out-of-bounds reads in tcp_hash_fail() - fix SYN option room calculation for TCP-AO - tcp_sigpool: fix some off by one bugs - bpf: fix compilation error without CGROUPS - ptp: - ptp_read() should not release queue - fix tsevqs corruption Previous releases - regressions: - llc: verify mac len before reading mac header Previous releases - always broken: - bpf: - fix check_stack_write_fixed_off() to correctly spill imm - fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END - check map->usercnt after timer->timer is assigned - dsa: lan9303: consequently nested-lock physical MDIO - dccp/tcp: call security_inet_conn_request() after setting IP addr - tg3: fix the TX ring stall due to incorrect full ring handling - phylink: initialize carrier state at creation - ice: fix direction of VF rules in switchdev mode Misc: - fill in a bunch of missing MODULE_DESCRIPTION()s, more to come" * tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: ti: icss-iep: fix setting counter value ptp: fix corrupted list in ptp_open ptp: ptp_read should not release queue net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP net: kcm: fill in MODULE_DESCRIPTION() net/sched: act_ct: Always fill offloading tuple iifidx netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses netfilter: xt_recent: fix (increase) ipv6 literal buffer length ipvs: add missing module descriptions netfilter: nf_tables: remove catchall element in GC sync path netfilter: add missing module descriptions drivers/net/ppp: use standard array-copy-function net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt() r8169: respect userspace disabling IFF_MULTICAST selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg net: phylink: initialize carrier state at creation test/vsock: add dobule bind connect test test/vsock: refactor vsock_accept ...
2023-11-09btrfs: make OWNER_REF_KEY type value smallest among inline refsBoris Burkov
BTRFS_EXTENT_OWNER_REF_KEY is the type of simple quotas extent owner refs. This special inline ref goes in front of all other inline refs. In general, inline refs have a required sorted order s.t. type never decreases (among other requirements). This was recently reified into a tree-checker and fsck rule, which broke simple quotas. To be fair, though, in a sense, the new owner ref item had also violated that not yet fully enforced requirement. This fix brings the owner ref item into compliance with the requirement that inline ref type never decrease. btrfs/301 exercises this behavior and should pass again with this fix. Fixes: d9a620f77e33 ("btrfs: new inline ref storing owning subvol of data extents") Signed-off-by: Boris Burkov <boris@bur.io> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-11-07Merge tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull more drm updates from Dave Airlie: "Geert pointed out I missed the renesas reworks in my main pull, so this pull contains the renesas next work for atomic conversion and DT support. It also contains a bunch of amdgpu and some small ssd13xx fixes. renesas: - atomic conversion - DT support ssd13xx: - dt binding fix for ssd132x - Initialize ssd130x crtc_state to NULL. amdgpu: - Fix RAS support check - RAS fixes - MES fixes - SMU13 fixes - Contiguous memory allocation fix - BACO fixes - GPU reset fixes - Min power limit fixes - GFX11 fixes - USB4/TB hotplug fixes - ARM regression fix - GFX9.4.3 fixes - KASAN/KCSAN stack size check fixes - SR-IOV fixes - SMU14 fixes - PSP13 fixes - Display blend fixes - Flexible array size fixes amdkfd: - GPUVM fix radeon: - Flexible array size fixes" * tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits) drm/amd/display: Enable fast update on blendTF change drm/amd/display: Fix blend LUT programming drm/amd/display: Program plane color setting correctly drm/amdgpu: Query and report boot status drm/amdgpu: Add psp v13 function to query boot status drm/amd/swsmu: remove fw version check in sw_init. drm/amd/swsmu: update smu v14_0_0 driver if and metrics table drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks drm/amdgpu: Optimize the asic type fix code drm/amdgpu: fix GRBM read timeout when do mes_self_test drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs drm/amdgpu: Attach eviction fence on alloc drm/amdkfd: Improve amdgpu_vm_handle_moved drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2 drm/amd/display: Avoid NULL dereference of timing generator drm/amdkfd: Update cache info for GFX 9.4.3 drm/amdkfd: Populate cache info for GFX 9.4.3 drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64 drm/amdgpu/smu13: drop compute workload workaround ...
generated by cgit v1.2.3 (git 2.0.4) at 2026-07-10 13:22:22 +0000