summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-23regulator: ab8500: Remove SYSCLKREQ from enum ab8505_regulator_idStephan Gerhold
commit 458ea3ad033fc86e291712ce50cbe60c3428cf30 upstream. Those regulators are not actually supported by the AB8500 regulator driver. There is no ab8500_regulator_info for them and no entry in ab8505_regulator_match. As such, they cannot be registered successfully, and looking them up in ab8505_regulator_match causes an out-of-bounds array read. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-2-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23block: fix an integer overflow in logical block sizeMikulas Patocka
commit ad6bf88a6c19a39fb3b0045d78ea880325dfcf15 upstream. Logical block size has type unsigned short. That means that it can be at most 32768. However, there are architectures that can run with 64k pages (for example arm64) and on these architectures, it may be possible to create block devices with 64k block size. For exmaple (run this on an architecture with 64k pages): Mount will fail with this error because it tries to read the superblock using 2-sector access: device-mapper: writecache: I/O is not aligned, sector 2, size 1024, block size 65536 EXT4-fs (dm-0): unable to read superblock This patch changes the logical block size from unsigned short to unsigned int to avoid the overflow. Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23dt-bindings: reset: meson8b: fix duplicate reset IDsMartin Blumenstingl
commit 4881873f4cc1460f63d85fa81363d56be328ccdc upstream. According to the public S805 datasheet the RESET2 register uses the following bits for the PIC_DC, PSC and NAND reset lines: - PIC_DC is at bit 3 (meaning: RESET_VD_RMEM + 3) - PSC is at bit 4 (meaning: RESET_VD_RMEM + 4) - NAND is at bit 5 (meaning: RESET_VD_RMEM + 4) Update the reset IDs of these three reset lines so they don't conflict with PIC_DC and map to the actual hardware reset lines. Fixes: 79795e20a184eb ("dt-bindings: reset: Add bindings for the Meson SoC Reset Controller") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17cfg80211/mac80211: make ieee80211_send_layer2_update a public functionDedy Lansky
commit 30ca1aa536211f5ac3de0173513a7a99a98a97f3 upstream. Make ieee80211_send_layer2_update() a common function so other drivers can re-use it. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 4.14 as dependency of commit 3e493173b784 "mac80211: Do not send Layer 2 Update frame before authorization"] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17fs/select: avoid clang stack usage warningArnd Bergmann
commit ad312f95d41c9de19313c51e388c4984451c010f upstream. The select() implementation is carefully tuned to put a sensible amount of data on the stack for holding a copy of the user space fd_set, but not too large to risk overflowing the kernel stack. When building a 32-bit kernel with clang, we need a little more space than with gcc, which often triggers a warning: fs/select.c:619:5: error: stack frame size of 1048 bytes in function 'core_sys_select' [-Werror,-Wframe-larger-than=] int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp, I experimentally found that for 32-bit ARM, reducing the maximum stack usage by 64 bytes keeps us reliably under the warning limit again. Link: http://lkml.kernel.org/r/20190307090146.1874906-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Eric Dumazet <edumazet@google.com> Cc: "Darrick J. Wong" <darrick.wong@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Miles Chen <miles.chen@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14can: can_dropped_invalid_skb(): ensure an initialized headroom in outgoing ↵Oliver Hartkopp
CAN sk_buffs commit e7153bf70c3496bac00e7e4f395bb8d8394ac0ea upstream. KMSAN sysbot detected a read access to an untinitialized value in the headroom of an outgoing CAN related sk_buff. When using CAN sockets this area is filled appropriately - but when using a packet socket this initialization is missing. The problematic read access occurs in the CAN receive path which can only be triggered when the sk_buff is sent through a (virtual) CAN interface. So we check in the sending path whether we need to perform the missing initializations. Fixes: d3b58c47d330d ("can: replace timestamp as unique skb attribute") Reported-by: syzbot+b02ff0707a97e4e79ebb@syzkaller.appspotmail.com Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: linux-stable <stable@vger.kernel.org> # >= v4.1 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12macvlan: do not assume mac_header is set in macvlan_broadcast()Eric Dumazet
[ Upstream commit 96cc4b69581db68efc9749ef32e9cf8e0160c509 ] Use of eth_hdr() in tx path is error prone. Many drivers call skb_reset_mac_header() before using it, but others do not. Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") attempted to fix this generically, but commit d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") brought back the macvlan bug. Lets add a new helper, so that tx paths no longer have to call skb_reset_mac_header() only to get a pointer to skb->data. Hopefully we will be able to revert 6d1ccff62780 ("net: reset mac header in dev_start_xmit()") and save few cycles in transmit fast path. BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline] BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579 CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline] mc_hash drivers/net/macvlan.c:251 [inline] macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline] macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559 __netdev_start_xmit include/linux/netdevice.h:4447 [inline] netdev_start_xmit include/linux/netdevice.h:4461 [inline] dev_direct_xmit+0x419/0x630 net/core/dev.c:4079 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240 packet_snd net/packet/af_packet.c:2966 [inline] packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 __sys_sendto+0x262/0x380 net/socket.c:1985 __do_sys_sendto net/socket.c:1997 [inline] __se_sys_sendto net/socket.c:1993 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x442639 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639 RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527 __do_kmalloc mm/slab.c:3656 [inline] __kmalloc+0x163/0x770 mm/slab.c:3665 kmalloc include/linux/slab.h:561 [inline] tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9389: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kfree+0x10a/0x2c0 mm/slab.c:3757 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289 tomoyo_get_realpath security/tomoyo/file.c:151 [inline] tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129 security_inode_getattr+0xf2/0x150 security/security.c:1222 vfs_getattr+0x25/0x70 fs/stat.c:115 vfs_statx_fd+0x71/0xc0 fs/stat.c:145 vfs_fstat include/linux/fs.h:3265 [inline] __do_sys_newfstat+0x9b/0x120 fs/stat.c:378 __se_sys_newfstat fs/stat.c:375 [inline] __x64_sys_newfstat+0x54/0x80 fs/stat.c:375 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a4932000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 1025 bytes inside of 4096-byte region [ffff8880a4932000, ffff8880a4933000) The buggy address belongs to the page: page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0 raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000 raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: b863ceb7ddce ("[NET]: Add macvlan driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12netfilter: uapi: Avoid undefined left-shift in xt_sctp.hPhil Sutter
[ Upstream commit 164166558aacea01b99c8c8ffb710d930405ba69 ] With 'bytes(__u32)' being 32, a left-shift of 31 may happen which is undefined for the signed 32-bit value 1. Avoid this by declaring 1 as unsigned. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09net: add annotations on hh->hh_len lockless accessesEric Dumazet
[ Upstream commit c305c6ae79e2ce20c22660ceda94f0d86d639a82 ] KCSAN reported a data-race [1] While we can use READ_ONCE() on the read sides, we need to make sure hh->hh_len is written last. [1] BUG: KCSAN: data-race in eth_header_cache / neigh_resolve_output write to 0xffff8880b9dedcb8 of 4 bytes by task 29760 on cpu 0: eth_header_cache+0xa9/0xd0 net/ethernet/eth.c:247 neigh_hh_init net/core/neighbour.c:1463 [inline] neigh_resolve_output net/core/neighbour.c:1480 [inline] neigh_resolve_output+0x415/0x470 net/core/neighbour.c:1470 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 read to 0xffff8880b9dedcb8 of 4 bytes by task 29572 on cpu 1: neigh_resolve_output net/core/neighbour.c:1479 [inline] neigh_resolve_output+0x113/0x470 net/core/neighbour.c:1470 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] NF_HOOK include/linux/netfilter.h:305 [inline] ndisc_send_skb+0x459/0x5f0 net/ipv6/ndisc.c:505 ndisc_send_ns+0x207/0x430 net/ipv6/ndisc.c:647 rt6_probe_deferred+0x98/0xf0 net/ipv6/route.c:615 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 29572 Comm: kworker/1:4 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events rt6_probe_deferred Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09regulator: ab8500: Remove AB8505 USB regulatorStephan Gerhold
commit 99c4f70df3a6446c56ca817c2d0f9c12d85d4e7c upstream. The USB regulator was removed for AB8500 in commit 41a06aa738ad ("regulator: ab8500: Remove USB regulator"). It was then added for AB8505 in commit 547f384f33db ("regulator: ab8500: add support for ab8505"). However, there was never an entry added for it in ab8505_regulator_match. This causes all regulators after it to be initialized with the wrong device tree data, eventually leading to an out-of-bounds array read. Given that it is not used anywhere in the kernel, it seems likely that similar arguments against supporting it exist for AB8505 (it is controlled by hardware). Therefore, simply remove it like for AB8500 instead of adding an entry in ab8505_regulator_match. Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505") Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191106173125.14496-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys()Florian Fainelli
commit 84b032dbfdf1c139cd2b864e43959510646975f8 upstream. This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5 ("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are going to need ahci_platform_{enable,disable}_phys() in a subsequent commit for ahci_brcm.c in order to properly control the PHY initialization order. Also make sure the function prototypes are declared in include/linux/ahci_platform.h as a result. Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09dmaengine: Fix access to uninitialized dma_slave_capsLukas Wunner
commit 53a256a9b925b47c7e67fc1f16ca41561a7b877c upstream. dmaengine_desc_set_reuse() allocates a struct dma_slave_caps on the stack, populates it using dma_get_slave_caps() and then accesses one of its members. However dma_get_slave_caps() may fail and this isn't accounted for, leading to a legitimate warning of gcc-4.9 (but not newer versions): In file included from drivers/spi/spi-bcm2835.c:19:0: drivers/spi/spi-bcm2835.c: In function 'dmaengine_desc_set_reuse': >> include/linux/dmaengine.h:1370:10: warning: 'caps.descriptor_reuse' is used uninitialized in this function [-Wuninitialized] if (caps.descriptor_reuse) { Fix it, thereby also silencing the gcc-4.9 warning. The issue has been present for 4 years but surfaces only now that the first caller of dmaengine_desc_set_reuse() has been added in spi-bcm2835.c. Another user of reusable DMA descriptors has existed for a while in pxa_camera.c, but it sets the DMA_CTRL_REUSE flag directly instead of calling dmaengine_desc_set_reuse(). Nevertheless, tag this commit for stable in case there are out-of-tree users. Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.3+ Link: https://lore.kernel.org/r/ca92998ccc054b4f2bfd60ef3adbab2913171eac.1575546234.git.lukas@wunner.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09nvme_fc: add module to ops template to allow module referencesJames Smart
[ Upstream commit 863fbae929c7a5b64e96b8a3ffb34a29eefb9f8f ] In nvme-fc: it's possible to have connected active controllers and as no references are taken on the LLDD, the LLDD can be unloaded. The controller would enter a reconnect state and as long as the LLDD resumed within the reconnect timeout, the controller would resume. But if a namespace on the controller is the root device, allowing the driver to unload can be problematic. To reload the driver, it may require new io to the boot device, and as it's no longer connected we get into a catch-22 that eventually fails, and the system locks up. Fix this issue by taking a module reference for every connected controller (which is what the core layer did to the transport module). Reference is cleared when the controller is removed. Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04tcp/dccp: fix possible race __inet_lookup_established()Eric Dumazet
commit 8dbd76e79a16b45b2ccb01d2f2e08dbf64e71e40 upstream. Michal Kubecek and Firo Yang did a very nice analysis of crashes happening in __inet_lookup_established(). Since a TCP socket can go from TCP_ESTABLISH to TCP_LISTEN (via a close()/socket()/listen() cycle) without a RCU grace period, I should not have changed listeners linkage in their hash table. They must use the nulls protocol (Documentation/RCU/rculist_nulls.txt), so that a lookup can detect a socket in a hash list was moved in another one. Since we added code in commit d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix"), we have to add hlist_nulls_add_tail_rcu() helper. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Firo Yang <firo.yang@suse.com> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Link: https://lore.kernel.org/netdev/20191120083919.GH27852@unicorn.suse.cz/ Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> [stable-4.14: we also need to update code in __inet_lookup_listener() and inet6_lookup_listener() which has been removed in 5.0-rc1.] Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net/dst: add new function skb_dst_update_pmtu_no_confirmHangbin Liu
[ Upstream commit 07dc35c6e3cc3c001915d05f5bf21f80a39a0970 ] Add a new function skb_dst_update_pmtu_no_confirm() for callers who need update pmtu but should not do neighbor confirm. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: add bool confirm_neigh parameter for dst_ops.update_pmtuHangbin Liu
[ Upstream commit bd085ef678b2cc8c38c105673dfe8ff8f5ec0c57 ] The MTU update code is supposed to be invoked in response to real networking events that update the PMTU. In IPv6 PMTU update function __ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor confirmed time. But for tunnel code, it will call pmtu before xmit, like: - tnl_update_pmtu() - skb_dst_update_pmtu() - ip6_rt_update_pmtu() - __ip6_rt_update_pmtu() - dst_confirm_neigh() If the tunnel remote dst mac address changed and we still do the neigh confirm, we will not be able to update neigh cache and ping6 remote will failed. So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we should not be invoking dst_confirm_neigh() as we have no evidence of successful two-way communication at this point. On the other hand it is also important to keep the neigh reachability fresh for TCP flows, so we cannot remove this dst_confirm_neigh() call. To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu to choose whether we should do neigh update or not. I will add the parameter in this patch and set all the callers to true to comply with the previous way, and fix the tunnel code one by one on later patches. v5: No change. v4: No change. v3: Do not remove dst_confirm_neigh, but add a new bool parameter in dst_ops.update_pmtu to control whether we should do neighbor confirm. Also split the big patch to small ones for each area. v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu. Suggested-by: David Miller <davem@davemloft.net> Reviewed-by: Guillaume Nault <gnault@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04ptp: fix the race between the release of ptp_clock and cdevVladis Dronov
[ Upstream commit a33121e5487b424339636b25c35d3a180eaa5f5e ] In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/20191125125342.6189-1-vdronov@redhat.com/T/#u Analyzed-by: Stephen Johnston <sjohnsto@redhat.com> Analyzed-by: Vern Lovejoy <vlovejoy@redhat.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04hrtimer: Annotate lockless access to timer->stateEric Dumazet
commit 56144737e67329c9aaed15f942d46a6302e2e3d8 upstream. syzbot reported various data-race caused by hrtimer_is_queued() reading timer->state. A READ_ONCE() is required there to silence the warning. Also add the corresponding WRITE_ONCE() when timer->state is set. In remove_hrtimer() the hrtimer_is_queued() helper is open coded to avoid loading timer->state twice. KCSAN reported these cases: BUG: KCSAN: data-race in __remove_hrtimer / tcp_pacing_check write to 0xffff8880b2a7d388 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 run_ksoftirqd+0x46/0x60 kernel/softirq.c:603 smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 read to 0xffff8880b2a7d388 of 1 bytes by task 24652 on cpu 1: tcp_pacing_check net/ipv4/tcp_output.c:2235 [inline] tcp_pacing_check+0xba/0x130 net/ipv4/tcp_output.c:2225 tcp_xmit_retransmit_queue+0x32c/0x5a0 net/ipv4/tcp_output.c:3044 tcp_xmit_recovery+0x7c/0x120 net/ipv4/tcp_input.c:3558 tcp_ack+0x17b6/0x3170 net/ipv4/tcp_input.c:3717 tcp_rcv_established+0x37e/0xf50 net/ipv4/tcp_input.c:5696 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 BUG: KCSAN: data-race in __remove_hrtimer / __tcp_ack_snd_check write to 0xffff8880a3a65588 of 1 bytes by interrupt on cpu 0: __remove_hrtimer+0x52/0x130 kernel/time/hrtimer.c:991 __run_hrtimer kernel/time/hrtimer.c:1496 [inline] __hrtimer_run_queues+0x250/0x600 kernel/time/hrtimer.c:1576 hrtimer_run_softirq+0x10e/0x150 kernel/time/hrtimer.c:1593 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 read to 0xffff8880a3a65588 of 1 bytes by task 22891 on cpu 1: __tcp_ack_snd_check+0x415/0x4f0 net/ipv4/tcp_input.c:5265 tcp_ack_snd_check net/ipv4/tcp_input.c:5287 [inline] tcp_rcv_established+0x750/0xf50 net/ipv4/tcp_input.c:5708 tcp_v4_do_rcv+0x381/0x4e0 net/ipv4/tcp_ipv4.c:1561 sk_backlog_rcv include/net/sock.h:945 [inline] __release_sock+0x135/0x1e0 net/core/sock.c:2435 release_sock+0x61/0x160 net/core/sock.c:2951 sk_stream_wait_memory+0x3d7/0x7c0 net/core/stream.c:145 tcp_sendmsg_locked+0xb47/0x1f30 net/ipv4/tcp.c:1393 tcp_sendmsg+0x39/0x60 net/ipv4/tcp.c:1434 inet_sendmsg+0x6d/0x90 net/ipv4/af_inet.c:807 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 __sys_sendto+0x21f/0x320 net/socket.c:1952 __do_sys_sendto net/socket.c:1964 [inline] __se_sys_sendto net/socket.c:1960 [inline] __x64_sys_sendto+0x89/0xb0 net/socket.c:1960 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24652 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 [ tglx: Added comments ] Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20191106174804.74723-1-edumazet@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04net: add a READ_ONCE() in skb_peek_tail()Eric Dumazet
commit f8cc62ca3e660ae3fdaee533b1d554297cd2ae82 upstream. skb_peek_tail() can be used without protection of a lock, as spotted by KCSAN [1] In order to avoid load-stearing, add a READ_ONCE() Note that the corresponding WRITE_ONCE() are already there. [1] BUG: KCSAN: data-race in sk_wait_data / skb_queue_tail read to 0xffff8880b36a4118 of 8 bytes by task 20426 on cpu 1: skb_peek_tail include/linux/skbuff.h:1784 [inline] sk_wait_data+0x15b/0x250 net/core/sock.c:2477 kcm_wait_data+0x112/0x1f0 net/kcm/kcmsock.c:1103 kcm_recvmsg+0xac/0x320 net/kcm/kcmsock.c:1130 sock_recvmsg_nosec net/socket.c:871 [inline] sock_recvmsg net/socket.c:889 [inline] sock_recvmsg+0x92/0xb0 net/socket.c:885 ___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480 do_recvmmsg+0x19a/0x5c0 net/socket.c:2601 __sys_recvmmsg+0x1ef/0x200 net/socket.c:2680 __do_sys_recvmmsg net/socket.c:2703 [inline] __se_sys_recvmmsg net/socket.c:2696 [inline] __x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b36a4118 of 8 bytes by task 451 on cpu 0: __skb_insert include/linux/skbuff.h:1852 [inline] __skb_queue_before include/linux/skbuff.h:1958 [inline] __skb_queue_tail include/linux/skbuff.h:1991 [inline] skb_queue_tail+0x7e/0xc0 net/core/skbuff.c:3145 kcm_queue_rcv_skb+0x202/0x310 net/kcm/kcmsock.c:206 kcm_rcv_strparser+0x74/0x4b0 net/kcm/kcmsock.c:370 __strp_recv+0x348/0xf50 net/strparser/strparser.c:309 strp_recv+0x84/0xa0 net/strparser/strparser.c:343 tcp_read_sock+0x174/0x5c0 net/ipv4/tcp.c:1639 strp_read_sock+0xd4/0x140 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0x9a/0xe0 net/strparser/strparser.c:423 process_one_work+0x3d4/0x890 kernel/workqueue.c:2269 worker_thread+0xa0/0x800 kernel/workqueue.c:2415 kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 451 Comm: kworker/u4:3 Not tainted 5.4.0-rc3+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.hMasahiro Yamada
[ Upstream commit a8de1304b7df30e3a14f2a8b9709bb4ff31a0385 ] The DTC v1.5.1 added references to (U)INT32_MAX. This is no problem for user-space programs since <stdint.h> defines (U)INT32_MAX along with (u)int32_t. For the kernel space, libfdt_env.h needs to be adjusted before we pull in the changes. In the kernel, we usually use s/u32 instead of (u)int32_t for the fixed-width types. Accordingly, we already have S/U32_MAX for their max values. So, we should not add (U)INT32_MAX to <linux/limits.h> any more. Instead, add them to the in-kernel libfdt_env.h to compile the latest libfdt. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04scsi: target: iscsi: Wait for all commands to finish before freeing a sessionBart Van Assche
[ Upstream commit e9d3009cb936bd0faf0719f68d98ad8afb1e613b ] The iSCSI target driver is the only target driver that does not wait for ongoing commands to finish before freeing a session. Make the iSCSI target driver wait for ongoing commands to finish before freeing a session. This patch fixes the following KASAN complaint: BUG: KASAN: use-after-free in __lock_acquire+0xb1a/0x2710 Read of size 8 at addr ffff8881154eca70 by task kworker/0:2/247 CPU: 0 PID: 247 Comm: kworker/0:2 Not tainted 5.4.0-rc1-dbg+ #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: target_completion target_complete_ok_work [target_core_mod] Call Trace: dump_stack+0x8a/0xd6 print_address_description.constprop.0+0x40/0x60 __kasan_report.cold+0x1b/0x33 kasan_report+0x16/0x20 __asan_load8+0x58/0x90 __lock_acquire+0xb1a/0x2710 lock_acquire+0xd3/0x200 _raw_spin_lock_irqsave+0x43/0x60 target_release_cmd_kref+0x162/0x7f0 [target_core_mod] target_put_sess_cmd+0x2e/0x40 [target_core_mod] lio_check_stop_free+0x12/0x20 [iscsi_target_mod] transport_cmd_check_stop_to_fabric+0xd8/0xe0 [target_core_mod] target_complete_ok_work+0x1b0/0x790 [target_core_mod] process_one_work+0x549/0xa40 worker_thread+0x7a/0x5d0 kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Allocated by task 889: save_stack+0x23/0x90 __kasan_kmalloc.constprop.0+0xcf/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0xf6/0x360 transport_alloc_session+0x29/0x80 [target_core_mod] iscsi_target_login_thread+0xcd6/0x18f0 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 Freed by task 1025: save_stack+0x23/0x90 __kasan_slab_free+0x13a/0x190 kasan_slab_free+0x12/0x20 kmem_cache_free+0x146/0x400 transport_free_session+0x179/0x2f0 [target_core_mod] transport_deregister_session+0x130/0x180 [target_core_mod] iscsit_close_session+0x12c/0x350 [iscsi_target_mod] iscsit_logout_post_handler+0x136/0x380 [iscsi_target_mod] iscsit_response_queue+0x8de/0xbe0 [iscsi_target_mod] iscsi_target_tx_thread+0x27f/0x370 [iscsi_target_mod] kthread+0x1bc/0x210 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff8881154ec9c0 which belongs to the cache se_sess_cache of size 352 The buggy address is located 176 bytes inside of 352-byte region [ffff8881154ec9c0, ffff8881154ecb20) The buggy address belongs to the page: page:ffffea0004553b00 refcount:1 mapcount:0 mapping:ffff888101755400 index:0x0 compound_mapcount: 0 flags: 0x2fff000000010200(slab|head) raw: 2fff000000010200 dead000000000100 dead000000000122 ffff888101755400 raw: 0000000000000000 0000000080130013 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881154ec900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881154ec980: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8881154eca00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881154eca80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881154ecb00: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc Cc: Mike Christie <mchristi@redhat.com> Link: https://lore.kernel.org/r/20191113220508.198257-3-bvanassche@acm.org Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned longKonstantin Khlebnikov
[ Upstream commit 6fcbcec9cfc7b3c6a2c1f1a23ebacedff7073e0a ] Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu fractions as signed 64-bit int, filters negative values and then reports lower half as signed 32-bit int. Result may looks like: fs.quota.allocated_dquots = 22327 fs.quota.cache_hits = -489852115 fs.quota.drops = -487288718 fs.quota.free_dquots = 22083 fs.quota.lookups = -486883485 fs.quota.reads = 22327 fs.quota.syncs = 335064 fs.quota.writes = 3088689 Values bigger than 2^31-1 reported as negative. All counters except "allocated_dquots" and "free_dquots" are monotonic, thus they should be reported as is without filtering negative values. Kernel doesn't have generic helper for 64-bit sysctl yet, let's use at least unsigned long. Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31rfkill: allocate static minorMarcel Holtmann
[ Upstream commit 8670b2b8b029a6650d133486be9d2ace146fd29a ] udev has a feature of creating /dev/<node> device-nodes if it finds a devnode:<node> modalias. This allows for auto-loading of modules that provide the node. This requires to use a statically allocated minor number for misc character devices. However, rfkill uses dynamic minor numbers and prevents auto-loading of the module. So allocate the next static misc minor number and use it for rfkill. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31block: Fix writeback throttling W=1 compiler warningsBart Van Assche
[ Upstream commit 1d200e9d6f635ae894993a7d0f1b9e0b6e522e3b ] Fix the following compiler warnings: In file included from ./include/linux/bitmap.h:9, from ./include/linux/cpumask.h:12, from ./arch/x86/include/asm/cpumask.h:5, from ./arch/x86/include/asm/msr.h:11, from ./arch/x86/include/asm/processor.h:21, from ./arch/x86/include/asm/cpufeature.h:5, from ./arch/x86/include/asm/thread_info.h:53, from ./include/linux/thread_info.h:38, from ./arch/x86/include/asm/preempt.h:7, from ./include/linux/preempt.h:78, from ./include/linux/spinlock.h:51, from ./include/linux/mmzone.h:8, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from ./include/linux/bvec.h:13, from ./include/linux/blk_types.h:10, from block/blk-wbt.c:23: In function 'strncpy', inlined from 'perf_trace_wbt_stat' at ./include/trace/events/wbt.h:15:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_lat' at ./include/trace/events/wbt.h:58:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_step' at ./include/trace/events/wbt.h:87:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'perf_trace_wbt_timer' at ./include/trace/events/wbt.h:126:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_stat' at ./include/trace/events/wbt.h:15:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_lat' at ./include/trace/events/wbt.h:58:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_timer' at ./include/trace/events/wbt.h:126:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'strncpy', inlined from 'trace_event_raw_event_wbt_step' at ./include/trace/events/wbt.h:87:1: ./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] return __builtin_strncpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Fixes: e34cbd307477 ("blk-wbt: add general throttling mechanism"; v4.10). Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: cec-funcs.h: add status_req checksHans Verkuil
[ Upstream commit 9b211f9c5a0b67afc435b86f75d78273b97db1c5 ] The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the follower will reply with a STATUS message. Either once or whenever the status changes (status_req == ON). If status_req == OFF, then it will stop sending continuous status updates, but the follower will *not* send a STATUS message in that case. This means that if status_req == OFF, then msg->reply should be 0 as well since no reply is expected in that case. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31drm: mst: Fix query_payload ack reply structSean Paul
[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ] Spec says[1] Allocated_PBN is 16 bits [1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98 Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Lyude Paul <lyude@redhat.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31net: dst: Force 4-byte alignment of dst_metricsGeert Uytterhoeven
[ Upstream commit 258a980d1ec23e2c786e9536a7dd260bea74bae6 ] When storing a pointer to a dst_metrics structure in dst_entry._metrics, two flags are added in the least significant bits of the pointer value. Hence this assumes all pointers to dst_metrics structures have at least 4-byte alignment. However, on m68k, the minimum alignment of 32-bit values is 2 bytes, not 4 bytes. Hence in some kernel builds, dst_default_metrics may be only 2-byte aligned, leading to obscure boot warnings like: WARNING: CPU: 0 PID: 7 at lib/refcount.c:28 refcount_warn_saturate+0x44/0x9a refcount_t: underflow; use-after-free. Modules linked in: CPU: 0 PID: 7 Comm: ksoftirqd/0 Tainted: G W 5.5.0-rc2-atari-01448-g114a1a1038af891d-dirty #261 Stack from 10835e6c: 10835e6c 0038134f 00023fa6 00394b0f 0000001c 00000009 00321560 00023fea 00394b0f 0000001c 001a70f8 00000009 00000000 10835eb4 00000001 00000000 04208040 0000000a 00394b4a 10835ed4 00043aa8 001a70f8 00394b0f 0000001c 00000009 00394b4a 0026aba8 003215a4 00000003 00000000 0026d5a8 00000001 003215a4 003a4361 003238d6 000001f0 00000000 003215a4 10aa3b00 00025e84 003ddb00 10834000 002416a8 10aa3b00 00000000 00000080 000aa038 0004854a Call Trace: [<00023fa6>] __warn+0xb2/0xb4 [<00023fea>] warn_slowpath_fmt+0x42/0x64 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<00043aa8>] printk+0x0/0x18 [<001a70f8>] refcount_warn_saturate+0x44/0x9a [<0026aba8>] refcount_sub_and_test.constprop.73+0x38/0x3e [<0026d5a8>] ipv4_dst_destroy+0x5e/0x7e [<00025e84>] __local_bh_enable_ip+0x0/0x8e [<002416a8>] dst_destroy+0x40/0xae Fix this by forcing 4-byte alignment of all dst_metrics structures. Fixes: e5fd387ad5b30ca3 ("ipv6: do not overwrite inetpeer metrics prematurely") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31mod_devicetable: fix PHY module formatRussell King
[ Upstream commit d2ed49cf6c13e379c5819aa5ac20e1f9674ebc89 ] When a PHY is probed, if the top bit is set, we end up requesting a module with the string "mdio:-10101110000000100101000101010001" - the top bit is printed to a signed -1 value. This leads to the module not being loaded. Fix the module format string and the macro generating the values for it to ensure that we only print unsigned types and the top bit is always 0/1. We correctly end up with "mdio:10101110000000100101000101010001". Fixes: 8626d3b43280 ("phylib: Support phy module autoloading") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21inet: protect against too small mtu values.Eric Dumazet
[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ] syzbot was once again able to crash a host by setting a very small mtu on loopback device. Let's make inetdev_valid_mtu() available in include/net/ip.h, and use it in ip_setup_cork(), so that we protect both ip_append_page() and __ip_append_data() Also add a READ_ONCE() when the device mtu is read. Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(), even if other code paths might write over this field. Add a big comment in include/linux/netdevice.h about dev->mtu needing READ_ONCE()/WRITE_ONCE() annotations. Hopefully we will add the missing ones in followup patches. [1] refcount_t: saturated; leaking memory. WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 panic+0x2e3/0x75c kernel/panic.c:221 __warn.cold+0x2f/0x3e kernel/panic.c:582 report_bug+0x289/0x300 lib/bug.c:195 fixup_bug arch/x86/kernel/traps.c:174 [inline] fixup_bug arch/x86/kernel/traps.c:169 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267 do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286 invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027 RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22 Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89 RSP: 0018:ffff88809689f550 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1 R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001 R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40 refcount_add include/linux/refcount.h:193 [inline] skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999 sock_wmalloc+0xf1/0x120 net/core/sock.c:2096 ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383 udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276 inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821 kernel_sendpage+0x92/0xf0 net/socket.c:3794 sock_sendpage+0x8b/0xc0 net/socket.c:936 pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458 splice_from_pipe_feed fs/splice.c:512 [inline] __splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636 splice_from_pipe+0x108/0x170 fs/splice.c:671 generic_splice_sendpage+0x3c/0x50 fs/splice.c:842 do_splice_from fs/splice.c:861 [inline] direct_splice_actor+0x123/0x190 fs/splice.c:1035 splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990 do_splice_direct+0x1da/0x2a0 fs/splice.c:1078 do_sendfile+0x597/0xd00 fs/read_write.c:1464 __do_sys_sendfile64 fs/read_write.c:1525 [inline] __se_sys_sendfile64 fs/read_write.c:1511 [inline] __x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x441409 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005 RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010 R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180 R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000 Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 1470ddf7f8ce ("inet: Remove explicit write references to sk/inet in ip_append_data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE()Guillaume Nault
[ Upstream commit 721c8dafad26ccfa90ff659ee19755e3377b829d ] Syncookies borrow the ->rx_opt.ts_recent_stamp field to store the timestamp of the last synflood. Protect them with READ_ONCE() and WRITE_ONCE() since reads and writes aren't serialised. Use of .rx_opt.ts_recent_stamp for storing the synflood timestamp was introduced by a0f82f64e269 ("syncookies: remove last_synq_overflow from struct tcp_sock"). But unprotected accesses were already there when timestamp was stored in .last_synq_overflow. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21tcp: tighten acceptance of ACKs not matching a child socketGuillaume Nault
[ Upstream commit cb44a08f8647fd2e8db5cc9ac27cd8355fa392d8 ] When no synflood occurs, the synflood timestamp isn't updated. Therefore it can be so old that time_after32() can consider it to be in the future. That's a problem for tcp_synq_no_recent_overflow() as it may report that a recent overflow occurred while, in fact, it's just that jiffies has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31. Spurious detection of recent overflows lead to extra syncookie verification in cookie_v[46]_check(). At that point, the verification should fail and the packet dropped. But we should have dropped the packet earlier as we didn't even send a syncookie. Let's refine tcp_synq_no_recent_overflow() to report a recent overflow only if jiffies is within the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This way, no spurious recent overflow is reported when jiffies wraps and 'last_overflow' becomes in the future from the point of view of time_after32(). However, if jiffies wraps and enters the [last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with 'last_overflow' being a stale synflood timestamp), then tcp_synq_no_recent_overflow() still erroneously reports an overflow. In such cases, we have to rely on syncookie verification to drop the packet. We unfortunately have no way to differentiate between a fresh and a stale syncookie timestamp. In practice, using last_overflow as lower bound is problematic. If the synflood timestamp is concurrently updated between the time we read jiffies and the moment we store the timestamp in 'last_overflow', then 'now' becomes smaller than 'last_overflow' and tcp_synq_no_recent_overflow() returns true, potentially dropping a valid syncookie. Reading jiffies after loading the timestamp could fix the problem, but that'd require a memory barrier. Let's just accommodate for potential timestamp growth instead and extend the interval using 'last_overflow - HZ' as lower bound. Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21tcp: fix rejected syncookies due to stale timestampsGuillaume Nault
[ Upstream commit 04d26e7b159a396372646a480f4caa166d1b6720 ] If no synflood happens for a long enough period of time, then the synflood timestamp isn't refreshed and jiffies can advance so much that time_after32() can't accurately compare them any more. Therefore, we can end up in a situation where time_after32(now, last_overflow + HZ) returns false, just because these two values are too far apart. In that case, the synflood timestamp isn't updated as it should be, which can trick tcp_synq_no_recent_overflow() into rejecting valid syncookies. For example, let's consider the following scenario on a system with HZ=1000: * The synflood timestamp is 0, either because that's the timestamp of the last synflood or, more commonly, because we're working with a freshly created socket. * We receive a new SYN, which triggers synflood protection. Let's say that this happens when jiffies == 2147484649 (that is, 'synflood timestamp' + HZ + 2^31 + 1). * Then tcp_synq_overflow() doesn't update the synflood timestamp, because time_after32(2147484649, 1000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 1000: the value of 'last_overflow' + HZ. * A bit later, we receive the ACK completing the 3WHS. But cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow() says that we're not under synflood. That's because time_after32(2147484649, 120000) returns false. With: - 2147484649: the value of jiffies, aka. 'now'. - 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID. Of course, in reality jiffies would have increased a bit, but this condition will last for the next 119 seconds, which is far enough to accommodate for jiffie's growth. Fix this by updating the overflow timestamp whenever jiffies isn't within the [last_overflow, last_overflow + HZ] range. That shouldn't have any performance impact since the update still happens at most once per second. Now we're guaranteed to have fresh timestamps while under synflood, so tcp_synq_no_recent_overflow() can safely use it with time_after32() in such situations. Stale timestamps can still make tcp_synq_no_recent_overflow() return the wrong verdict when not under synflood. This will be handled in the next patch. For 64 bits architectures, the problem was introduced with the conversion of ->tw_ts_recent_stamp to 32 bits integer by commit cca9bab1b72c ("tcp: use monotonic timestamps for PAWS"). The problem has always been there on 32 bits architectures. Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17mfd: rk808: Fix RK818 ID templateDaniel Schultz
[ Upstream commit 37ef8c2c15bdc1322b160e38986c187de2b877b2 ] The Rockchip PMIC driver can automatically detect connected component versions by reading the ID_MSB and ID_LSB registers. The probe function will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the RK818 template ID is 0x8181. This patch changes this value to 0x8180. Fixes: 9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed") Cc: stable@vger.kernel.org Cc: Elaine Zhang <zhangqing@rock-chips.com> Cc: Joseph Chen <chenjh@rock-chips.com> Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17quota: Check that quota is not dirty before releaseDmitry Monakhov
commit df4bb5d128e2c44848aeb36b7ceceba3ac85080d upstream. There is a race window where quota was redirted once we drop dq_list_lock inside dqput(), but before we grab dquot->dq_lock inside dquot_release() TASK1 TASK2 (chowner) ->dqput() we_slept: spin_lock(&dq_list_lock) if (dquot_dirty(dquot)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->write_dquot(dquot); goto we_slept if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); dquot->dq_sb->dq_op->release_dquot(dquot); dqget() mark_dquot_dirty() dqput() goto we_slept; } So dquot dirty quota will be released by TASK1, but on next we_sleept loop we detect this and call ->write_dquot() for it. XFSTEST: https://github.com/dmonakhov/xfstests/commit/440a80d4cbb39e9234df4d7240aee1d551c36107 Link: https://lore.kernel.org/r/20191031103920.3919-2-dmonakhov@openvz.org CC: stable@vger.kernel.org Signed-off-by: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17media: cec.h: CEC_OP_REC_FLAG_ values were swappedHans Verkuil
commit 806e0cdfee0b99efbb450f9f6e69deb7118602fc upstream. CEC_OP_REC_FLAG_NOT_USED is 0 and CEC_OP_REC_FLAG_USED is 1, not the other way around. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Jiunn Chang <c0d1n61at3@gmail.com> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17appletalk: Fix potential NULL pointer dereference in unregister_snap_clientYueHaibing
commit 9804501fa1228048857910a6bf23e085aade37cc upstream. register_snap_client may return NULL, all the callers check it, but only print a warning. This will result in NULL pointer dereference in unregister_snap_client and other places. It has always been used like this since v2.6 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to <4.15: adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17jbd2: Fix possible overflow in jbd2_log_space_left()Jan Kara
commit add3efdd78b8a0478ce423bb9d4df6bd95e8b335 upstream. When number of free space in the journal is very low, the arithmetic in jbd2_log_space_left() could underflow resulting in very high number of free blocks and thus triggering assertion failure in transaction commit code complaining there's not enough space in the journal: J_ASSERT(journal->j_free > 1); Properly check for the low number of free blocks. CC: stable@vger.kernel.org Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191105164437.32602-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17kernfs: fix ino wrap-around detectionTejun Heo
commit e23f568aa63f64cd6b355094224cc9356c0f696b upstream. When the 32bit ino wraps around, kernfs increments the generation number to distinguish reused ino instances. The wrap-around detection tests whether the allocated ino is lower than what the cursor but the cursor is pointing to the next ino to allocate so the condition never triggers. Fix it by remembering the last ino and comparing against that. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: 4a3ef68acacf ("kernfs: implement i_generation") Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17firmware: qcom: scm: fix compilation error when disabledJonathan Marek
[ Upstream commit 16ad9501b1f2edebe24f8cf3c09da0695871986b ] This fixes the case when CONFIG_QCOM_SCM is not enabled, and linux/errno.h has not been included previously. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17tty: Don't block on IO when ldisc change is pendingDmitry Safonov
[ Upstream commit c96cf923a98d1b094df9f0cf97a83e118817e31b ] There might be situations where tty_ldisc_lock() has blocked, but there is already IO on tty and it prevents line discipline changes. It might theoretically turn into dead-lock. Basically, provide more priority to pending tty_ldisc_lock() than to servicing reads/writes over tty. User-visible issue was reported by Mikulas where on pa-risc with Debian 5 reboot took either 80 seconds, 3 minutes or 3:25 after proper locking in tty_reopen(). Cc: Jiri Slaby <jslaby@suse.com> Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17mtd: fix mtd_oobavail() incoherent returned valueMiquel Raynal
[ Upstream commit 4348433d8c0234f44adb6e12112e69343f50f0c5 ] mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both values are unsigned 32-bit entities, so there is no reason to pretend returning a signed one. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17dma-mapping: fix return type of dma_set_max_seg_size()Niklas Söderlund
[ Upstream commit c9d76d0655c06b8c1f944e46c4fd9e9cf4b331c0 ] The function dma_set_max_seg_size() can return either 0 on success or -EIO on error. Change its return type from unsigned int to int to capture this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17ACPI: fix acpi_find_child_device() invocation in acpi_preset_companion()Alexey Dobriyan
[ Upstream commit f8c6d1402b89f22a3647705d63cbd171aa19a77e ] acpi_find_child_device() accepts boolean not pointer as last argument. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17dmaengine: dw-dmac: implement dma protection control settingChristian Lamparter
[ Upstream commit 7b0c03ecc42fb223baf015877fee9d517c2c8af1 ] This patch adds a new device-tree property that allows to specify the dma protection control bits for the all of the DMA controller's channel uniformly. Setting the "correct" bits can have a huge impact on the PPC460EX and APM82181 that use this DMA engine in combination with a DesignWare' SATA-II core (sata_dwc_460ex driver). In the OpenWrt Forum, the user takimata reported that: |It seems your patch unleashed the full power of the SATA port. |Where I was previously hitting a really hard limit at around |82 MB/s for reading and 27 MB/s for writing, I am now getting this: | |root@OpenWrt:/mnt# time dd if=/dev/zero of=tempfile bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 13.65s |user 0m 0.01s |sys 0m 11.89s | |root@OpenWrt:/mnt# time dd if=tempfile of=/dev/null bs=1M count=1024 |1024+0 records in |1024+0 records out |real 0m 8.41s |user 0m 0.01s |sys 0m 4.70s | |This means: 121 MB/s reading and 75 MB/s writing! | |The drive is a WD Green WD10EARX taken from an older MBL Single. |I repeated the test a few times with even larger files to rule out |any caching, I'm still seeing the same great performance. OpenWrt is |now completely on par with the original MBL firmware's performance. Another user And.short reported: |I can report that your fix worked! Boots up fine with two |drives even with more partitions, and no more reboot on |concurrent disk access! A closer look into the sata_dwc_460ex code revealed that the driver did initally set the correct protection control bits. However, this feature was lost when the sata_dwc_460ex driver was converted to the generic DMA driver framework. BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/55 BugLink: https://forum.openwrt.org/t/wd-mybook-live-duo-two-disks/16195/50 Fixes: 8b3444852a2b ("sata_dwc_460ex: move to generic DMA driver") Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17math-emu/soft-fp.h: (_FP_ROUND_ZERO) cast 0 to void to fix warningVincent Chen
[ Upstream commit 83312f1b7ae205dca647bf52bbe2d51303cdedfb ] _FP_ROUND_ZERO is defined as 0 and used as a statemente in macro _FP_ROUND. This generates "error: statement with no effect [-Werror=unused-value]" from gcc. Defining _FP_ROUND_ZERO as (void)0 to fix it. This modification is quoted from glibc 'commit <In libc/:> (8ed1e7d5894000c155acbd06f)' Signed-off-by: Vincent Chen <vincentc@andestech.com> Acked-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17regulator: Fix return value of _set_load() stubMark Brown
[ Upstream commit f1abf67217de91f5cd3c757ae857632ca565099a ] The stub implementation of _set_load() returns a mode value which is within the bounds of valid return codes for success (the documentation just says that failures are negative error codes) but not sensible or what the actual implementation does. Fix it to just return 0. Reported-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328Katsuhiro Suzuki
[ Upstream commit df7b1f2e0a4ae0fceff261e29cde63dafcf2360f ] This patch fixes mistakes in HCLK_I2S1_8CH for running I2S1 successfully. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17serial: core: Allow processing sysrq at port unlock timeDouglas Anderson
[ Upstream commit d6e1935819db0c91ce4a5af82466f3ab50d17346 ] Right now serial drivers process sysrq keys deep in their character receiving code. This means that they've already grabbed their port->lock spinlock. This can end up getting in the way if we've go to do serial stuff (especially kgdb) in response to the sysrq. Serial drivers have various hacks in them to handle this. Looking at '8250_port.c' you can see that the console_write() skips locking if we're in the sysrq handler. Looking at 'msm_serial.c' you can see that the port lock is dropped around uart_handle_sysrq_char(). It turns out that these hacks aren't exactly perfect. If you have lockdep turned on and use something like the 8250_port hack you'll get a splat that looks like: WARNING: possible circular locking dependency detected [...] is trying to acquire lock: ... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4 but task is already holding lock: ... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x58/0x70 serial8250_console_write+0xa8/0x250 univ8250_console_write+0x40/0x4c console_unlock+0x528/0x5e4 register_console+0x2c4/0x3b0 uart_add_one_port+0x350/0x478 serial8250_register_8250_port+0x350/0x3a8 dw8250_probe+0x67c/0x754 platform_drv_probe+0x58/0xa4 really_probe+0x150/0x294 driver_probe_device+0xac/0xe8 __driver_attach+0x98/0xd0 bus_for_each_dev+0x84/0xc8 driver_attach+0x2c/0x34 bus_add_driver+0xf0/0x1ec driver_register+0xb4/0x100 __platform_driver_register+0x60/0x6c dw8250_platform_driver_init+0x20/0x28 ... -> #0 (console_owner){-.-.}: lock_acquire+0x1e8/0x214 console_unlock+0x35c/0x5e4 vprintk_emit+0x230/0x274 vprintk_default+0x7c/0x84 vprintk_func+0x190/0x1bc printk+0x80/0xa0 __handle_sysrq+0x104/0x21c handle_sysrq+0x30/0x3c serial8250_read_char+0x15c/0x18c serial8250_rx_chars+0x34/0x74 serial8250_handle_irq+0x9c/0xe4 dw8250_handle_irq+0x98/0xcc serial8250_interrupt+0x50/0xe8 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(console_owner); *** DEADLOCK *** The hack used in 'msm_serial.c' doesn't cause the above splats but it seems a bit ugly to unlock / lock our spinlock deep in our irq handler. It seems like we could defer processing the sysrq until the end of the interrupt handler right after we've unlocked the port. With this scheme if a whole batch of sysrq characters comes in one irq then we won't handle them all, but that seems like it should be a fine compromise. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05futex: Add mutex around futex exitThomas Gleixner
commit 3f186d974826847a07bc7964d79ec4eded475ad9 upstream. The mutex will be used in subsequent changes to replace the busy looping of a waiter when the futex owner is currently executing the exit cleanup to prevent a potential live lock. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.845798895@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05futex: Mark the begin of futex exit explicitlyThomas Gleixner
commit 18f694385c4fd77a09851fd301236746ca83f3cb upstream. Instead of relying on PF_EXITING use an explicit state for the futex exit and set it in the futex exit function. This moves the smp barrier and the lock/unlock serialization into the futex code. As with the DEAD state this is restricted to the exit path as exec continues to use the same task struct. This allows to simplify that logic in a next step. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20191106224556.539409004@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-11 18:40:27 +0000