| Age | Commit message (Collapse) | Author |
|---|
|
This patch allows for easy integration of a custom Linux boot logo to
replace the Tux' being shown by default.
Use gimp or the like to create a raw PPM in your desired resolution.
Reduce the number of colours in the image to 224:
user@host:~$ ppmquant 224 Toradex-640x480.ppm > \
Toradex-640x480-224.ppm
ppmquant: making histogram...
ppmquant: 370 colors found
ppmquant: choosing 224 colors...
ppmquant: mapping image to new colors...
Convert it from raw PPM to ASCII format:
user@host:~$ pnmnoraw Toradex-640x480-224.ppm > \
Toradex-640x480-ascii-224.ppm
Copy it into the Linux sources:
cp Toradex-640x480-ascii-224.ppm linux-toradex/drivers/video/logo/\
logo_custom_clut224.ppm
Activate exclusively custom Linux logo in the kernel configuration:
Device Drivers -> Graphics support -> Bootup logo ->
Custom 224-color Linux logo
And re-compile the kernel.
(cherry picked from commit fa2371bff9ac03581881849d8f95678ef3992719)
(cherry picked from commit 481ced9057f340a80bf23775a55a9b657c49201f)
|
|
Rather than relying on special USB/PHY pins/registers use the generic
extcon framework with its extcon-usb-gpio implementation to detect ID
and VBUS changes.
(cherry picked from commit a257098741b441e6e84ffe97b7793c580642d502)
|
|
Add resource-managed extcon device register function for convenience.
For example, if a extcon device is attached with new
devm_extcon_dev_register(), that extcon device is automatically
unregistered on driver detach.
Signed-off-by: Sangjung Woo <sangjung.woo@samsung.com>
[Fix bug about devm_extcon_dev_match/release() and code clean by Chanwoo Choi]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
(cherry picked from commit 1111244ff4493448c0ee66e814e20c6e81d3b93d)
|
|
The gpio binding document says that new code should always use named
gpios. Patch 40b73183 added support to parse a list of gpios from child
nodes, but does not make it possible to use named gpios. This patch adds
the con_id property and implements it is done in gpiolib.c, where the
old-style of using unnamed gpios still works.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Acked-by: Bryan Wu <cooloney@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 1feb57a245a4910b03202a814ffc51a900bd4aca)
|
|
Device tree nodes are already treated as objects, and we already want to
expose them to userspace which is done using the /proc filesystem today.
Right now the kernel has to do a lot of work to keep the /proc view in
sync with the in-kernel representation. If device_nodes are switched to
be kobjects then the device tree code can be a whole lot simpler. It
also turns out that switching to using /sysfs from /proc results in
smaller code and data size, and the userspace ABI won't change if
/proc/device-tree symlinks to /sys/firmware/devicetree/base.
v7: Add missing sysfs_bin_attr_init()
v6: Add __of_add_property() early init fixes from Pantelis
v5: Rename firmware/ofw to firmware/devicetree
Fix updating property values in sysfs
v4: Fixed build error on Powerpc
Fixed handling of dynamic nodes on powerpc
v3: Fixed handling of duplicate attribute and child node names
v2: switch to using sysfs bin_attributes which solve the problem of
reporting incorrect property size.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
(cherry picked from commit 75b57ecf9d1d1e17d099ab13b8f48e6e038676be)
|
|
Add new generic routines are provided for retrieving properties from
device description objects in the platform firmware in case there are
no struct device objects for them (either those objects have not been
created yet or they do not exist at all).
The following functions are provided:
fwnode_property_present()
fwnode_property_read_u8()
fwnode_property_read_u16()
fwnode_property_read_u32()
fwnode_property_read_u64()
fwnode_property_read_string()
fwnode_property_read_u8_array()
fwnode_property_read_u16_array()
fwnode_property_read_u32_array()
fwnode_property_read_u64_array()
fwnode_property_read_string_array()
in analogy with the corresponding functions for struct device added
previously. For all of them, the first argument is a pointer to struct
fwnode_handle (new type) that allows a device description object
(depending on what platform firmware interface is in use) to be
obtained.
Add a new macro device_for_each_child_node() for iterating over the
children of the device description object associated with a given
device and a new function device_get_child_node_count() returning the
number of a given device's child nodes.
The interface covers both ACPI and Device Trees.
Suggested-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 8a0662d9ed2968e1186208336a8e1fab3fdfea63)
|
|
Add a uniform interface by which device drivers can request device
properties from the platform firmware by providing a property name
and the corresponding data type. The purpose of it is to help to
write portable code that won't depend on any particular platform
firmware interface.
The following general helper functions are added:
device_property_present()
device_property_read_u8()
device_property_read_u16()
device_property_read_u32()
device_property_read_u64()
device_property_read_string()
device_property_read_u8_array()
device_property_read_u16_array()
device_property_read_u32_array()
device_property_read_u64_array()
device_property_read_string_array()
The first one allows the caller to check if the given property is
present. The next 5 of them allow single-valued properties of
various types to be retrieved in a uniform way. The remaining 5 are
for reading properties with multiple values (arrays of either numbers
or strings).
The interface covers both ACPI and Device Trees.
This change set includes material from Mika Westerberg and Aaron Lu.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit b31384fa5de37a100507751dfb5c0a49d06cee67)
|
|
Commit 21f2aae91e902aad ("leds: leds-gpio: Add support for GPIO
descriptors") already converted most of the driver to use GPIO descriptors.
What is still missing is the platform specific hook gpio_blink_set() and
board files which pass legacy GPIO numbers to this driver in platform data.
In this patch we handle the former and convert gpio_blink_set() to take
GPIO descriptor instead. In order to do this we convert the existing four
users to accept GPIO descriptor and translate it to legacy GPIO number in
the platform code. This effectively "pushes" legacy GPIO number usage from
the driver to platforms.
Also add comment to the remaining block describing that it is legacy code
path and we are getting rid of it eventually.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit c673a2b4008103525a3cf21bedf15ffac37bfef0)
|
|
GPIO descriptors are the preferred way over legacy GPIO numbers
nowadays. Convert the driver to use GPIO descriptors internally but
still allow passing legacy GPIO numbers from platform data to support
existing platforms.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 5c51277a9ababfa44a7f944100bdc9fbda139905)
|
|
Some drivers need to deal with only firmware representation of its
GPIOs. An example would be a GPIO button array driver where each button
is described as a separate firmware node in device tree. Typically these
child nodes do not have physical representation in the Linux device
model.
In order to help device drivers to handle such firmware child nodes we
add dev[m]_get_named_gpiod_from_child() that takes a child firmware
node pointer as its second argument (the first one is the parent device
itself), finds the GPIO using whatever is the underlying firmware
method, and requests the GPIO properly.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 40b7318319281b1bdec804f6435f26cadd329c13)
|
|
Device Tree is used in many embedded systems to describe the system
configuration to the OS. It supports attaching properties or name-value
pairs to the devices it describe. With these properties one can pass
additional information to the drivers that would not be available
otherwise.
ACPI is another configuration mechanism (among other things) typically
seen, but not limited to, x86 machines. ACPI allows passing arbitrary
data from methods but there has not been mechanism equivalent to Device
Tree until the introduction of _DSD in the recent publication of the
ACPI 5.1 specification.
In order to facilitate ACPI usage in systems where Device Tree is
typically used, it would be beneficial to standardize a way to retrieve
Device Tree style properties from ACPI devices, which is what we do in
this patch.
If a given device described in ACPI namespace wants to export properties it
must implement _DSD method (Device Specific Data, introduced with ACPI 5.1)
that returns the properties in a package of packages. For example:
Name (_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package () {
Package () {"name1", <VALUE1>},
Package () {"name2", <VALUE2>},
...
}
})
The UUID reserved for properties is daffd814-6eba-4d8c-8a91-bc9bbf4aa301
and is documented in the ACPI 5.1 companion document called "_DSD
Implementation Guide" [1], [2].
We add several helper functions that can be used to extract these
properties and convert them to different Linux data types.
The ultimate goal is that we only have one device property API that
retrieves the requested properties from Device Tree or from ACPI
transparent to the caller.
[1] http://www.uefi.org/sites/default/files/resources/_DSD-implementation-guide-toplevel.htm
[2] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit ffdcd955c3078af3ce117edcfce80fde1a512bed)
|
|
The huge majority of GPIOs have their direction and initial value set
right after being obtained by one of the gpiod_get() functions. The
integer GPIO API had gpio_request_one() that took a convenience flags
parameter allowing to specify an direction and value applied to the
returned GPIO. This feature greatly simplifies client code and ensures
errors are always handled properly.
A similar feature has been requested for the gpiod API. Since setting
the direction of a GPIO is so often the very next action done after
obtaining its descriptor, we prefer to extend the existing functions
instead of introducing new functions that would raise the
number of gpiod getters to 16 (!).
The drawback of this approach is that all gpiod clients need to be
updated. To limit the pain, temporary macros are introduced that allow
gpiod_get*() to be called with or without the extra flags argument. They
will be removed once all consumer code has been updated.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 39b2bbe3d715cf5013b5c48695ccdd25bd3bf120)
|
|
This patch moves <acpi/acpi.h> out of CONFIG_ACPI condition so that all
ACPICA prototypes can be seen by the CONFIG_ACPI=n Linux kernel builds.
Note that we can do this because ACPICA has implemented stubs for all
ACPICA prototypes that are currently referenced by the Linux kernel.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 633adaba49d46dcaa4289de5b25c562b54ff575b)
|
|
The forthcoming patch will make <acpi/acpi.h> to be visible to all kernel
source code. Thus for the architectures that do not support ACPI and
haven't implemented <asm/acenv.h>, we need to make it excluded.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d334c823b27401721591e0f1220050a41af08165)
|
|
<asm/acpi.h>
There is a mis-order inclusion for <asm/acpi.h>.
As we will enforce including <linux/acpi.h> for all Linux ACPI users, we
can find the inclusion order is as follows:
<linux/acpi.h>
<acpi/acpi.h>
<acpi/platform/acenv.h>
(acenv.h before including aclinux.h)
<acpi/platform/aclinux.h>
...........................................................................
(aclinux.h before including asm/acpi.h)
<asm/acpi.h> @Redundant@
(ACPICA specific stuff)
...........................................................................
...........................................................................
(Linux ACPI specific stuff) ? - - - - - - - - - - - - +
(aclinux.h after including asm/acpi.h) @Invisible@ |
(acenv.h after including aclinux.h) @Invisible@ |
other ACPICA headers @Invisible@ |
............................................................|..............
<acpi/acpi_bus.h> |
<acpi/acpi_drivers.h> |
<asm/acpi.h> (Excluded) |
(Linux ACPI specific stuff) ! <- - - - - - - - - - - - - +
NOTE that, in ACPICA, <acpi/platform/acenv.h> is more like Kconfig
generated <generated/autoconf.h> for Linux, it is meant to be included
before including any ACPICA code.
In the above figure, there is a question mark for "Linux ACPI specific
stuff" in <asm/acpi.h> which should be included after including all other
ACPICA header files. Thus they really need to be moved to the position
marked with exclaimation mark or the definitions in the blocks marked with
"@Invisible@" will be invisible to such architecture specific "Linux ACPI
specific stuff" header blocks. This leaves 2 issues:
1. All environmental definitions in these blocks should have a copy in the
area marked with "@Redundant@" if they are required by the "Linux ACPI
specific stuff".
2. We cannot use any ACPICA defined types in <asm/acpi.h>.
This patch splits architecture specific ACPICA stuff from <asm/acpi.h> to
fix this issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 07d8391433380fc72f999d99c554b1cfedea9778)
|
|
From ACPICA's perspective, <acpi/actypes.h> should be included after
inclusion of <acpi/platform/acenv.h>. But currently in Linux,
<acpi/platform/aclinux.h> included by <acpi/platform/acenv.h> has
included <acpi/actypes.h> to find ACPICA types for inline functions.
This causes the following problem:
1. Redundant code in <asm/acpi.h> and <acpi/platform/aclinux.h>:
Linux must be careful to keep conditions for <acpi/actypes.h> inclusion
consistent with the conditions for <acpi/platform/aclinux.h> inclusion.
Which finally leads to the issue that we have to keep many useless macro
definitions in <acpi/platform/aclinux.h> or <asm/acpi.h>.
Such conditions include:
COMPILER_DEPENDENT_UINT64
COMPILER_DEPENDENT_INT64
ACPI_INLINE
ACPI_SYSTEM_XFACE
ACPI_EXTERNAL_XFACE
ACPI_INTERNAL_XFACE
ACPI_INTERNAL_VAR_XFACE
ACPI_MUTEX_TYPE
DEBUGGER_THREADING
ACPI_ACQUIRE_GLOBAL_LOCK
ACPI_RELEASE_GLOBAL_LOCK
ACPI_FLUSH_CPU_CACHE
They have default implementations in <include/acpi/platform/acenv.h>
while Linux need to keep a copy in <asm/acpi.h> to avoid build errors.
This patch introduces <acpi/platform/aclinuxex.h> to fix this issue by
splitting conditions and declarations (most of them are inline functions)
into 2 header files so that the wrong inclusion of <acpi/actypes.h> can be
removed from <acpi/platform/aclinux.h>.
This patch also removes old ACPI_NATIVE_INTERFACE_HEADER mechanism which is
not preferred by Linux and adds the platform/acenvex.h to be the solution
to solve this issue.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d13bd5a602982cd7f697e39b13ac736c2c553af1)
(cherry picked from commit 6a3790a67bf22b0162337ef2faade225cc86c8b6)
|
|
Introduce gpiod_get_optional() and gpiod_get_index_optional() helpers
that make it easier for drivers to handle optional GPIOs.
Currently in order to handle optional GPIOs, a driver needs to special
case error handling for -ENOENT, such as this:
gpio = gpiod_get(dev, "foo");
if (IS_ERR(gpio)) {
if (PTR_ERR(gpio) != -ENOENT)
return PTR_ERR(gpio);
gpio = NULL;
}
if (gpio) {
/* set up GPIO */
}
With these new helpers the above is reduced to:
gpio = gpiod_get_optional(dev, "foo");
if (IS_ERR(gpio))
return PTR_ERR(gpio);
if (gpio) {
/* set up GPIO */
}
While at it, device-managed variants of these functions are also
provided.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
(cherry picked from commit 29a1f2333e07bbbecb920cc78fd035fe8f53207a)
|
|
device
This patch add device managed devm_extcon_dev_{allocate,free} to automatically
free the memory of extcon_dev structure without handling free operation.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 739ba1bfdb15e773999aafddbd6c59b5737797a0)
|
|
This patch move simply OF helper function to extcon core and change function
name as following:
- of_extcon_get_extcon_dev() -> extcon_get_edev_by_phandle()
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
(cherry picked from commit 1ad94ffef22c0a6e2ee6ba90a800c32fd29ffa1f)
|
|
The need to know the number of array elements in a property is
a common pattern. To prevent duplication of open-coded implementations
add a helper static function that also centralises strict sanity
checking and DTB format details, as well as a set of wrapper functions
for u8, u16, u32 and u64.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@bqreaders.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
(cherry picked from commit ad54a0cfbeb4bd4033d09017557ccbc423f9d5ff)
|
|
Remove translation protection for applications as Linux tools folder will
start to use such types.
In Linux kernel source tree, after removing this translation protection,
the u8/u16/u32/u64/s32/s64 typedefs are exposed for both __KERNEL__ builds
and !__KERNEL__ builds (tools/power/acpi) and the original definitions of
ACPI_UINT8/16/32/64_MAX are changed.
For !__KERNEL__ builds, this kind of defintions should already been tested
by the distribution vendors that are distributing binary ACPICA package and
we've achieved the successful built/run test result in the kernel source
tree.
For __KERNEL__ builds, there are 2 things affected:
1. u8/u16/u32/u64/s32/s64 type definitions:
Since Linux has already type defined u8/u16/u32/u64/s32/s64 in
include/uapi/asm-generic/int-ll64.h for __KERNEL__. In order not to
introduce build regressions where the 2 typedefs are differed,
ACPI_USE_SYSTEM_INTTYPES is introduced to mask out ACPICA's typedefs.
It must be defined for Linux __KERNEL__ builds.
2. ACPI_UINT8/16/32/64_MAX definitions:
Before applying this change:
ACPI_UINT8_MAX: sizeof (UINT8)
UINT8: unsigned char
ACPI_UINT16_MAX: sizeof (UINT16)
UINT16: unsigned short
ACPI_UINT32_MAX: sizeof (UINT32)
INT32: int
UINT32: unsigned int
ACPI_UINT64_MAX: sizeof (UINT64)
INT64: COMPILER_DEPENDENT_INT64
COMPILER_DEPENDENT_INT64: signed long (IA64) or
signed long long (IA32)
UINT64: COMPILER_DEPENDENT_UINT64
COMPILER_DEPENDENT_UINT64: unsigned long (IA64) or
unsigned long long (IA32)
After applying this change:
ACPI_UINT8_MAX: sizeof (u8)
u8: unsigned char
UINT8: (removed from actypes.h)
ACPI_UINT16_MAX: sizeof (u16)
u16: unsigned short
UINT16: (removed from actypes.h)
ACPI_UINT32_MAX: sizeof (u32)
INT32/UINT32: (removed from actypes.h)
s32: signed int
u32: unsigned int
ACPI_UINT64_MAX: sizeof (u64)
INT64/UINT64: (removed from actypes.h)
u64: unsigned long long
s64: signed long long
COMPILER_DEPENDENT_INT64: signed long (IA64) (not used any more)
signed long long (IA32) (not used any more)
COMPILER_DEPENDENT_UINT64: unsigned long (IA64) (not used any more)
unsigned long long (IA32) (not used any more)
All definitions are equal except ACPI_UINT64_MAX for CONFIG_IA64. It
is changed from sizeof(unsigned long) to sizeof(unsigned long long).
By investigation, 64bit Linux kernel build is LP64 compliant, i.e.,
sizeof(long) and (pointer) are 64. As sizeof(unsigned long) equals to
sizeof(unsigned long long) on IA64 platform where CONFIG_64BIT cannot be
disabled, this change actually will not affect the value of
ACPI_UINT64_MAX on IA64 platforms.
This patch is necessary for the ACPICA's acpidump tool to build
correctly. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit e252652fb2664d42de19f933aa3688bbc470de3f)
|
|
Added platform data struct to define interrupt and reset GPIO. This
allows to initialize the touchscreen controller inside the driver
rather then in each platform and use the driver as a module.
|
|
|
|
In order to use the auxiliar ADC inputs of STMPE811 devices we need
to add resources for the ADC block. Also move the ADC macros from
the touchscreen driver to the general header file. We will need them
for the ADC driver in future.
Conflicts:
drivers/mfd/stmpe.c
|
|
|
|
Signed-off-by: Robert Winkler <robert.winkler@boundarydevices.com>
|
|
Some PHY of imx usb need power supply from vbus to make it work, if there
is no vbus, USB PHY will not in correct state when the controller starts to
work, for host, this requires vbus should be turned on before setting port
power(PP) of ehci, to work with this kind of USB PHY design, this patch adds
a flag CI_HDRC_IMX_VBUS_EARLY_ON, can be checked by host driver to turn on
vbus while start host.
Signed-off-by: Li Jun <jun.li@freescale.com>
(cherry picked from commit 1d4c054323817b49897fd7a59bc57b4d36f09491)
|
|
To maintain scalability let's add common methods to attach and detach
a PM domain for a device, dev_pm_domain_attach|detach().
Typically dev_pm_domain_attach() shall be invoked from subsystem level
code at the probe phase to try to attach a device to its PM domain.
The reversed actions may be done a the remove phase and then by
invoking dev_pm_domain_detach().
When attachment succeeds, the attach function should assign its
corresponding detach function to a new ->detach() callback added in the
struct dev_pm_domain.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 46420dd73b800f87a19af13af5883855cf38cb08)
(cherry picked from commit 451a5b00e51410adc16f8349ed753f7eced46bc5)
|
|
The intent of this callback is to simplify detachment of devices from
their PM domains. Further patches will show the benefit.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit c3099a5294f2c7266234e8ea35cbffc20a41aa9a)
(cherry picked from commit 96257e7b72821bbaa5681b1d2042050c6aab0ea1)
|
|
This patch introduces generic code to perform PM domain look-up using
device tree and automatically bind devices to their PM domains.
Generic device tree bindings are introduced to specify PM domains of
devices in their device tree nodes.
Backwards compatibility with legacy Samsung-specific PM domain bindings
is provided, but for now the new code is not compiled when
CONFIG_ARCH_EXYNOS is selected to avoid collision with legacy code.
This will change as soon as the Exynos PM domain code gets converted to
use the generic framework in further patch.
This patch was originally submitted by Tomasz Figa when he was employed
by Samsung.
Link: http://marc.info/?l=linux-pm&m=139955349702152&w=2
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit aa42240ab2544a8bcb2efb400193826f57f3175e)
(cherry picked from commit 4a2d7a846761e3b86e08b903e5a1a088686e2181)
|
|
There are no active users of this API. Let's remove it and if future
needs shows up we could consider to have a get/put API instead.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d971f0b0eaaf3f2086bf21bbd64f7ea7e2f28459)
(cherry picked from commit 835729a13d0061f55d6bd714811a16ebaecb9b0e)
|
|
The pm_genpd_syscore_poweroff() API and pm_genpd_syscore_poweron() API
makes the pm_genpd_syscore_switch() API redundant.
Moreover, since there are no active users, let's just remove it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit d47e6464ae6c96735d4706f5cb0537fe717b6b00)
(cherry picked from commit 9b68cd944341e5a613e9858e65e3432bd5691f92)
|
|
The genpd dev_irq_safe configuration somewhat overlaps with the runtime
PM pm_runtime_irq_safe() option. Also, currently genpd don't have a
good way to deal with these device. So, until we figured out if and how
to support this in genpd, let's remove the option to configure it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit c5d79ec2a5715489cff16a0d1cf4fa9108a5509e)
(cherry picked from commit 4cffcdb2c92cabbba3e55a0f2d9c7d86d8a756ed)
|
|
There no users of these callbacks, let's simplify the generic power
domain by removing them.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 1e0407ca54d28db8e5f02e437ff21cc6416c0be8)
(cherry picked from commit 0f19454e606c6fbc7ce980ca128a703ebc8990fb)
|
|
In a step of simplifying the generic power domain let's move away from
using these callbacks.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 67da6d4bf43c4208433ef8f3ee487401b4dc9c74)
(cherry picked from commit b16a428836529af31f23b807065cc6e643c409da)
|
|
There are no users of these APIs. To simplify the generic power domain
let's remove them.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
(cherry picked from commit 55e15c949fd05d247a889df0ed0177a676fec665)
(cherry picked from commit da452fc0f1a1a75993a6c989a600dd2de309026c)
|
|
This reverts commit 4aa055cb0634bc8d0389070104fe6aa7cfa99b8c.
Signed-off-by: Robin Gong <b38343@freescale.com>
(cherry picked from commit e599f64de890a60a3b9884dd5838c43472f145e2)
|
|
This reverts commit e88c775a272b4f7af1a2fec8736fea9a55e58472.
Some HDMI TV not support rxsense as hotplug interrupter source.
Signed-off-by: Sandor Yu <R01008@freescale.com>
|
|
Add an interface for GPC used by drivers to keep mega fast mix domain
power.
Signed-off-by: Li Jun <jun.li@freescale.com>
|
|
As spdif driver will register SPDIF clock to regmap, regmap will do
clk_prepare in init function, so SPDIF clock is prepared in probe, then its
root clock (pll clock) is prepared also, which cause the arm can't enter
low power mode.
Add SPDIF_GCLK in clock tree which share same gate bits with SPDIF clock.
Its root clock is ipg clock, and register it to regmap, then the issue can be
fixed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
|
|
As spdif driver will register SPDIF clock to regmap, regmap will do
clk_prepare in init function, so SPDIF clock is prepared in probe, then its
root clock (pll clock) is prepared also, which cause the arm can't enter
low power mode.
Add SPDIF_GCLK in clock tree which share same gate bits with SPDIF clock.
Its root clock is ipg clock, and register it to regmap, then the issue can be
fixed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
|
|
As spdif driver will register SPDIF clock to regmap, regmap will do
clk_prepare in init function, so SPDIF clock is prepared in probe, then its
root clock (pll clock) is prepared also, which cause the arm can't enter
low power mode.
Add SPDIF_GCLK in clock tree which share same gate bits with SPDIF clock.
Its root clock is ipg clock, and register it to regmap, then the issue can be
fixed.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
|
|
Add otg_fsm pointer in struct of usb_bus for access otg_fsm via bus.
Original way was to put it in usb_otg, then usb host can access otg_fsm via
hcd->usb_phy->otg->fsm, since usb_phy will not be the future direction, instead
phy is prefered, so this way may not work. It's more direct and simple to put
it in usb_bus.
Signed-off-by: Li Jun <jun.li@freescale.com>
|
|
Add one field bcdOTG for OTG and EH supplement release number in OTG
descriptor according to On-The-Go and Embedded Host Supplement to the
USB Revision 2.0 Specification Revision 2.0 version 1.1a.
Acked-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Li Jun <b47624@freescale.com>
(cherry picked from commit 1bf5e829100a2922826818bd8cbb18ee81452cfc)
|
|
The glue layer may need to know current available role, add
ci_hdrc_query_available_role for that.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
(cherry picked from commit 5c340402131ca6eacaeb122deb1ee59bcea2778c)
|
|
This patch adds the imx6qdl.dtsi DTS support for crypto/caam. CAAM
clocking support is also included.
Signed-off-by: Victoria Milhoan <vicki.milhoan@freescale.com>
|
|
The AHBBRST at SBUSCFG and RX/TX burst size at BURSTSIZE are implementation
dependent, each platform may have different values, and some values may not be
optimized.
The glue layer can override ahb burst configuration value by setting flag
CI_HDRC_OVERRIDE_AHB_BURST and ahbburst_config.
The glue layer can override RX/TX burst size by setting flag
CI_HDRC_OVERRIDE_BURST_LENGTH and burst_length.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
(cherry picked from commit a6bf7a97a83a58b9fe6de91975e4203c235036be)
|
|
The chipidea IP has different limitations for host and device mode,
see below errata, we may need to enable SDIS(Stream Disable Mode)
at host mode, but we don't want it at device mode at some situations.
TAR 9000378958
Title: Non-Double Word Aligned Buffer Address Sometimes Causes Host to Hang on OUT Retry
Impacted Configuration: Host mode, all transfer types
Description:
The host core operating in streaming mode may under run while sending the data packet of an OUT transaction. This under run can occur if there are unexpected system delays in fetching the remaining packet data from memory. The host forces a bad CRC on the packet, the device detects the error and discards the packet. The host then retries a Bulk, Interrupt, or Control transfer if an under run occurs according to the USB specification.
During simulations, it was found that the host does not issue the retry of the failed bulk OUT. It does not issue any other transactions except SOF packets that have incorrect frame numbers.
The second failure mode occurs if the under run occurs on an ISO OUT transaction and the next ISO transaction is a zero byte packet. The host does not issue any transactions (including SOFs). The device detects a Suspend condition, reverts to full speed, and waits for resume signaling.
A third failure mode occurs when the host under runs on an ISO OUT and the next ISO in the schedule is an ISO OUT with two max packets of 1024 bytes each.
The host should issue MDATA for the first OUT followed by DATA1 for the second. However, it drops the MDATA transaction, and issues the DATA1 transaction.
The system impact of this bug is the same regardless of the failure mode observed. The host core hangs, the ehci_ctrl state machine waits for the protocol engine to send the completion status for the corrupted transaction, which never occurs. No indication is sent to the host controller driver, no register bits change and no interrupts occur. Eventually the requesting application times out.
Detailed internal behavior:
The EHCI control state machine (ehci_ctrl) in the DMA block is responsible for parsing the schedules and initiating all transactions. The ehci_ctrl state machine passes the transaction details to the protocol block by writing the transaction information in to the TxFIFO. It then asserts the pe_hst_run_pkt signal to inform the host protocol state machine (pe_hst_state) that there is a packet in the TxFIFO.
A tag of 0x0 indicates a start of packet with the data providing the following information:
35:32 Tag
31:30 Reserved
29:23 Endpoint (lowest 4 bits)
22:16 Address
15:10 Reserved
9:8 Endpoint speed
7:6 Endpoint type
5:6 Data Toggle
3:0 PID
The pe_hst_state reads the packet information and constructs the packet and issues it to the PHY interface.
The ehci_ctrl state machine writes the start transaction information in to the TxFIFO as 0x03002910c for the OUT packet that had the under run error. However, it writes 0xC3002910C for the retry of the Out transaction, which is incorrect.
The pe_hst_state enters a bus timeout state after sending the bad CRC for the packet that under ran. It then purges any data that was back filled in to the TxFIFO for the packet that under ran. The pe_hst_state machine stops purging the TxFIFO when it is empty or if it reads a location that has a tag of 0x0, indicating a start of packet command.
The pe_hst_state reads 0xC3002910C and discards it as it does not decode to a start of packet command. It continues to purge the OUT data that has been pre-buffered for the OUT retry . The pe_hst_state detects the hst_packet_run signal and attempts to read the PID and address information from the TxFIFO. This location has packet data and so does not decode to a valid PID and so falls through to the PE_HST_SOF_LOAD state where the frame_num_counter is updated. The frame_num_counter is updated with the data in the TxFIFO. In this case, the data is incorrect as the ehci_ctrl state machine did not initiate the load. The hst_pe_state machine detects the SOF request signal and sends an SOF with the bad frame number. Meanwhile, the ehci_ctrl state machine waits indefinitely in the run_pkt state waiting for the completion status from pe_hst_state machine, which will never happen.
The ISO failure case is similar except that there is no retry for ISO. The ehci_ctrl state machine moves to the next transfer in the periodic schedule. If the under run occurs on the last entry of the periodic list then it moves to the Async schedule.
In the case of ISO OUT simulations, the next ISO is a zero byte OUT and again the start of packet command gets corrupted. The TxFIFO is empty when the hst_pe_state attempts to read the Address and PID information as the transaction is a zero byte packet. This results in the hst_pe_state machine staying in the GET_PID state, which means that it does not issue any transactions (including SOFs). The device detects a Suspend condition and reverts to full speed mode and waits for a Resume or Reset signal.
The EHCI specification allows a Non-DoubleWord (32 bits) offset to be used as a current offset for Buffer Pointer Page 0 of the qTD. In Non-DoubleWord aligned cases, the core reads the packet data from the AHB memory, performs the alignment operation before writing it in to the TxFIFO as a 32 bit data word. An End Of Packet tag (EOP) is written to the TxFIFO after all the packet data has been written in to the TxFIFO. The alignment function is reset to Idle by the EOP tag. The corruption of the start of packet command arises because the packet buffer for the OUT transaction that under ran is not aligned to a DoubleWord, and hence no EOP tag is written to the TxFIFO. The alignment function is still active when the start packet information is written in to the TxFIFO for the retry of the bulk packet or for the next transaction in the case of an under run on an ISO. This results in the corruption of the start tag and the transaction information.
Click for waveform showing the command 0x 0000300291 being written in to the TX FIFO for the Out that under ran.
Click for waveform showing the command 0xC3002910C written to the TxFIFO instead of 0x 0000300291
Versions affected: Versions 2.10a and previous versions
How discovered: Customer simulation
Workaround:
1- The EHCI specification allows a non-DoubleWord offset to be used as a current offset for Buffer Pointer Page 0 of the qTD. However, if a DoubleWord offset is used then this issue does not arise.
2- Use non streaming mode to eliminate under runs.
Resolution:
The fix involves changes to the traffic state machine in the vusb_hs_dma_traf block. The ehci_ctrl state machine updates the context information by encoding the transaction results on the hst_op_context_update signals at the end of a transaction. The signal hst_op_context_update is added to the traffic state machine, and the tx_fifo_under_ran_r signal is generated if the transaction results in an under run error. Click for waveform
The traffic state machine then traverses to the do_eop states if the tx_fifo_under_ran error is asserted. Thus an EOP tag is written in to the TxFIFO as shown in this waveform .
The EOP tag resets the align state machine to the Idle state ensuring that the next command written by the echi_ctrl state machine does not get corrupted.
File(s) modified:
RTL code fixed: …..
Method of reproducing: This failure cannot be reproduced in the current test bench.
Date Found: March 2010
Date Fixed: June 2010
Update information:
Added the RTL code fix
Signed-off-by: Peter Chen <peter.chen@freescale.com>
(cherry picked from commit 9bbed86327e015a28f7e680784bb00dd7c83533d)
|
|
Add imx6 HSIC support
Signed-off-by: Peter Chen <peter.chen@freescale.com>
|
|
This patch adds OTG status selector request sending function, can be used
to poll peripheral if it wants to be host.
Signed-off-by: Li Jun <b47624@freescale.com>
|
