| Age | Commit message (Collapse) | Author |
|---|
|
The last thing we agreed on was to remove the macros entirely for 2.6.19,
on all architectures. Unfortunately, I think nobody actually _did_ that,
so they are still there.
[akpm@osdl.org: x86_64 fix]
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Schafer <gschafer@zip.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Workqueue functions should not leak locks, assert so, printing the
last function ran.
Use macros in lockdep.h to avoid include dependency pains.
[akpm@osdl.org: build fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Implement prof=sleep profiling. TASK_UNINTERRUPTIBLE sleeps will be taken
as a profile hit, and every millisecond spent sleeping causes a profile-hit
for the call site that initiated the sleep.
Sample readprofile output on i386:
306 ps2_sendbyte 1.3973
432 call_usermodehelper_keys 1.9548
484 ps2_command 0.6453
790 __driver_attach 4.7879
1593 msleep 44.2500
3976 sync_buffer 64.1290
4076 do_lookup 12.4648
8587 sync_page 122.6714
20820 total 0.0067
(NOTE: architectures need to check whether get_wchan() can be called from
deep within the wakeup path.)
akpm: we need to mark more functions __sched. lock_sock(), msleep(), others..
akpm: the contention in do_lookup() is a surprise. Presumably doing disk
reads for directory contents while holding i_mutex.
[akpm@osdl.org: various fixes]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Name some of the remaning 'old_style_spin_init' locks
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Saves nearly 4kbytes on x86.
Cc: Arnaldo Carvalho de Melo <acme@mandriva.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Saves nearly 4kbytes on x86.
Cc: Arnaldo Carvalho de Melo <acme@mandriva.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
This is on our "Envoy" boxes which we have, according to the documentation, an
"Exar ST16C554/554D Quad UART with 16-byte Fifo's". The box also has two
other "on-board" serial ports and a modem chip.
The two on-board serial UARTs were being detected along with the first two
Exar UARTs. The last two Exar UARTs were not showing up and neither was the
modem.
This patch was the only way I could the kernel to see beyond the standard four
serial ports and get all four of the Exar UARTs to show up.
[akpm@osdl.org: build fix]
Signed-off-by: Paul B Schroeder <pschroeder@uplogix.com>
Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
One of the mistakes a module_param() user can make is to supply default
value of module parameter as the last argument. module_param() accepts
permissions instead. If default value is, say, 3 (-------wx), parameter
becomes world-writeable.
So far, the only remedy was to apply grep(1) and read drivers submitted
to -mm. BTDT.
With this patch applied, compiler will finally do some job.
*) bounds checking on permissions
*) world-writeable bit checking on permissions
*) compile breakage if checks trigger
First version of this check (only "& 2" part) directly caught 4 out of 7
places during my last grep.
Subject: Neverending module_param() bugs
[X] drivers/acpi/sbs.c:101:module_param(capacity_mode, int, CAPACITY_UNIT);
[X] drivers/acpi/sbs.c:102:module_param(update_mode, int, UPDATE_MODE);
[ ] drivers/acpi/sbs.c:103:module_param(update_info_mode, int, UPDATE_INFO_MODE);
[ ] drivers/acpi/sbs.c:104:module_param(update_time, int, UPDATE_TIME);
[ ] drivers/acpi/sbs.c:105:module_param(update_time2, int, UPDATE_TIME2);
[X] drivers/char/watchdog/sbc8360.c:203:module_param(timeout, int, 27);
[X] drivers/media/video/tuner-simple.c:13:module_param(offset, int, 0666);
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Allocate ->signal->stats on demand in taskstats_exit(), this allows us to
remove taskstats_tgid_alloc() (the last non-trivial inline) from taskstat's
public interface.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
do_exit:
taskstats_exit_alloc()
...
taskstats_exit_send()
taskstats_exit_free()
I think this is not good, let it be a single function exported to the core
kernel, taskstats_exit(), which does alloc + send + free itself.
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
probe_kernel_address() purports to be generic, only it forgot to select
KERNEL_DS, so it presently won't work right on all architectures.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add support for the parallel port (implemented as separate PCI function) on
the Oxford Semiconductor OX16PCI952.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
linux/cdev.h uses struct kobject and other structs and should therefore
include them. Currently, a module either needs to add the missing includes
itself, or, in case a module includes other headers already, needs to put
<linux/cdev.h> last, which goes against a alphabetically-sorted include
list.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add SysRq-X support: show blocked (TASK_UNINTERRUPTIBLE) tasks only.
Useful for debugging IO stalls.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add a DESTROY operation for block device based filesystems. With the help of
this operation, such a filesystem can flush dirty data to the device
synchronously before the umount returns.
This is needed in situations where the filesystem is assumed to be clean
immediately after unmount (e.g. ejecting removable media).
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add support for the BMAP operation for block device based filesystems. This
is needed to support swap-files and lilo.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add a flag to the RELEASE message which specifies that a FLUSH operation
should be performed as well. This interface update is needed for the FreeBSD
port, and doesn't actually touch the Linux implementation at all.
Also rename the unused 'flush_flags' in the FLUSH message to 'unused'.
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Change the signature of i_size_read(), IMINOR() and IMAJOR() because they,
or the functions they call, will never modify the argument.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Stick NFS sockets in their own class to avoid some lockdep warnings. NFS
sockets are never exposed to user-space, and will hence not trigger certain
code paths that would otherwise pose deadlock scenarios.
[akpm@osdl.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Steven Dickson <SteveD@redhat.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Acked-by: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
[ Fixed patch corruption by quilt, pointed out by Peter Zijlstra ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add a driver for the Xilinx uartlite serial controller used in boards with
the PPC405 core in the Xilinx V2P/V4 fpgas.
The hardware is very simple (baudrate/start/stopbits fixed and no break
support). See the datasheet for details:
http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Add the support for a large number of logical volumes. We will soon have
hardware that support up to 1024 logical volumes.
Signed-off-by: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
More fallout of the post 2.6.19-rc1 IRQ changes...
CC init/main.o
In file included from
/home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/rtc.h:102,
from
/home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/efi.h:19,
from
/home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/init/main.c:43:
/home/bunk/linux/kernel-2.6/linux-2.6.19-rc6-mm2/include/linux/interrupt.h:67:
error: conflicting types for 'irq_handler_t'
include2/asm/irq.h:49: error: previous declaration of 'irq_handler_t' was here
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make it possible to create a workqueue the worker thread of which will be
frozen during suspend, along with other kernel threads.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Move the loop from thaw_processes() to a separate function and call it
independently for kernel threads and user space processes so that the order
of thawing tasks is clearly visible.
Drop thaw_kernel_threads() which is never used.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@suspend2.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make swsusp support i386 systems with PAE or without PSE.
This is done by creating temporary page tables located in resume-safe page
frames before the suspend image is restored in the same way as x86_64 does
it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Andi Kleen <ak@suse.de>
Cc: Dave Jones <davej@redhat.com>
Cc: Nigel Cunningham <ncunningham@linuxmail.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Modify process thawing so that we can thaw kernel space without thawing
userspace, and thaw kernelspace first. This will be useful in later
patches, where I intend to get swsusp thawing kernel threads only before
seeking to free memory.
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently swsusp saves the contents of highmem pages by copying them to the
normal zone which is quite inefficient (eg. it requires two normal pages
to be used for saving one highmem page). This may be improved by using
highmem for saving the contents of saveable highmem pages.
Namely, during the suspend phase of the suspend-resume cycle we try to
allocate as many free highmem pages as there are saveable highmem pages.
If there are not enough highmem image pages to store the contents of all of
the saveable highmem pages, some of them will be stored in the "normal"
memory. Next, we allocate as many free "normal" pages as needed to store
the (remaining) image data. We use a memory bitmap to mark the allocated
free pages (ie. highmem as well as "normal" image pages).
Now, we use another memory bitmap to mark all of the saveable pages
(highmem as well as "normal") and the contents of the saveable pages are
copied into the image pages. Then, the second bitmap is used to save the
pfns corresponding to the saveable pages and the first one is used to save
their data.
During the resume phase the pfns of the pages that were saveable during the
suspend are loaded from the image and used to mark the "unsafe" page
frames. Next, we try to allocate as many free highmem page frames as to
load all of the image data that had been in the highmem before the suspend
and we allocate so many free "normal" page frames that the total number of
allocated free pages (highmem and "normal") is equal to the size of the
image. While doing this we have to make sure that there will be some extra
free "normal" and "safe" page frames for two lists of PBEs constructed
later.
Now, the image data are loaded, if possible, into their "original" page
frames. The image data that cannot be written into their "original" page
frames are loaded into "safe" page frames and their "original" kernel
virtual addresses, as well as the addresses of the "safe" pages containing
their copies, are stored in one of two lists of PBEs.
One list of PBEs is for the copies of "normal" suspend pages (ie. "normal"
pages that were saveable during the suspend) and it is used in the same way
as previously (ie. by the architecture-dependent parts of swsusp). The
other list of PBEs is for the copies of highmem suspend pages. The pages
in this list are restored (in a reversible way) right before the
arch-dependent code is called.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make swsusp use block device offsets instead of swap offsets to identify swap
locations and make it use the same code paths for writing as well as for
reading data.
This allows us to use the same code for handling swap files and swap
partitions and to simplify the code, eg. by dropping rw_swap_page_sync().
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The Linux kernel handles swap files almost in the same way as it handles swap
partitions and there are only two differences between these two types of swap
areas:
(1) swap files need not be contiguous,
(2) the header of a swap file is not in the first block of the partition
that holds it. From the swsusp's point of view (1) is not a problem,
because it is already taken care of by the swap-handling code, but (2) has
to be taken into consideration.
In principle the location of a swap file's header may be determined with the
help of appropriate filesystem driver. Unfortunately, however, it requires
the filesystem holding the swap file to be mounted, and if this filesystem is
journaled, it cannot be mounted during a resume from disk. For this reason we
need some other means by which swap areas can be identified.
For example, to identify a swap area we can use the partition that holds the
area and the offset from the beginning of this partition at which the swap
header is located.
The following patch allows swsusp to identify swap areas this way. It changes
swap_type_of() so that it takes an additional argument representing an offset
of the swap header within the partition represented by its first argument.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Make radix tree lookups safe to be performed without locks. Readers are
protected against nodes being deleted by using RCU based freeing. Readers
are protected against new node insertion by using memory barriers to ensure
the node itself will be properly written before it is visible in the radix
tree.
Each radix tree node keeps a record of their height (above leaf nodes).
This height does not change after insertion -- when the radix tree is
extended, higher nodes are only inserted in the top. So a lookup can take
the pointer to what is *now* the root node, and traverse down it even if
the tree is concurrently extended and this node becomes a subtree of a new
root.
"Direct" pointers (tree height of 0, where root->rnode points directly to
the data item) are handled by using the low bit of the pointer to signal
whether rnode is a direct pointer or a pointer to a radix tree node.
When a reader wants to traverse the next branch, they will take a copy of
the pointer. This pointer will be either NULL (and the branch is empty) or
non-NULL (and will point to a valid node).
[akpm@osdl.org: cleanups]
[Lee.Schermerhorn@hp.com: bugfixes, comments, simplifications]
[clameter@sgi.com: build fix]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Before:
[acme@newtoy net-2.6.20]$ pahole --cacheline 32 kernel/sched.o mm_struct
/* include2/asm/processor.h:542 */
struct mm_struct {
struct vm_area_struct * mmap; /* 0 4 */
struct rb_root mm_rb; /* 4 4 */
struct vm_area_struct * mmap_cache; /* 8 4 */
long unsigned int (*get_unmapped_area)(); /* 12 4 */
void (*unmap_area)(); /* 16 4 */
long unsigned int mmap_base; /* 20 4 */
long unsigned int task_size; /* 24 4 */
long unsigned int cached_hole_size; /* 28 4 */
/* ---------- cacheline 1 boundary ---------- */
long unsigned int free_area_cache; /* 32 4 */
pgd_t * pgd; /* 36 4 */
atomic_t mm_users; /* 40 4 */
atomic_t mm_count; /* 44 4 */
int map_count; /* 48 4 */
struct rw_semaphore mmap_sem; /* 52 64 */
spinlock_t page_table_lock; /* 116 40 */
struct list_head mmlist; /* 156 8 */
mm_counter_t _file_rss; /* 164 4 */
mm_counter_t _anon_rss; /* 168 4 */
long unsigned int hiwater_rss; /* 172 4 */
long unsigned int hiwater_vm; /* 176 4 */
long unsigned int total_vm; /* 180 4 */
long unsigned int locked_vm; /* 184 4 */
long unsigned int shared_vm; /* 188 4 */
/* ---------- cacheline 6 boundary ---------- */
long unsigned int exec_vm; /* 192 4 */
long unsigned int stack_vm; /* 196 4 */
long unsigned int reserved_vm; /* 200 4 */
long unsigned int def_flags; /* 204 4 */
long unsigned int nr_ptes; /* 208 4 */
long unsigned int start_code; /* 212 4 */
long unsigned int end_code; /* 216 4 */
long unsigned int start_data; /* 220 4 */
/* ---------- cacheline 7 boundary ---------- */
long unsigned int end_data; /* 224 4 */
long unsigned int start_brk; /* 228 4 */
long unsigned int brk; /* 232 4 */
long unsigned int start_stack; /* 236 4 */
long unsigned int arg_start; /* 240 4 */
long unsigned int arg_end; /* 244 4 */
long unsigned int env_start; /* 248 4 */
long unsigned int env_end; /* 252 4 */
/* ---------- cacheline 8 boundary ---------- */
long unsigned int saved_auxv[44]; /* 256 176 */
unsigned int dumpable:2; /* 432 4 */
cpumask_t cpu_vm_mask; /* 436 4 */
mm_context_t context; /* 440 68 */
long unsigned int swap_token_time; /* 508 4 */
/* ---------- cacheline 16 boundary ---------- */
char recent_pagein; /* 512 1 */
/* XXX 3 bytes hole, try to pack */
int core_waiters; /* 516 4 */
struct completion * core_startup_done; /* 520 4 */
struct completion core_done; /* 524 52 */
rwlock_t ioctx_list_lock; /* 576 36 */
struct kioctx * ioctx_list; /* 612 4 */
}; /* size: 616, sum members: 613, holes: 1, sum holes: 3, cachelines: 20,
last cacheline: 8 bytes */
After:
[acme@newtoy net-2.6.20]$ pahole --cacheline 32 kernel/sched.o mm_struct
/* include2/asm/processor.h:542 */
struct mm_struct {
struct vm_area_struct * mmap; /* 0 4 */
struct rb_root mm_rb; /* 4 4 */
struct vm_area_struct * mmap_cache; /* 8 4 */
long unsigned int (*get_unmapped_area)(); /* 12 4 */
void (*unmap_area)(); /* 16 4 */
long unsigned int mmap_base; /* 20 4 */
long unsigned int task_size; /* 24 4 */
long unsigned int cached_hole_size; /* 28 4 */
/* ---------- cacheline 1 boundary ---------- */
long unsigned int free_area_cache; /* 32 4 */
pgd_t * pgd; /* 36 4 */
atomic_t mm_users; /* 40 4 */
atomic_t mm_count; /* 44 4 */
int map_count; /* 48 4 */
struct rw_semaphore mmap_sem; /* 52 64 */
spinlock_t page_table_lock; /* 116 40 */
struct list_head mmlist; /* 156 8 */
mm_counter_t _file_rss; /* 164 4 */
mm_counter_t _anon_rss; /* 168 4 */
long unsigned int hiwater_rss; /* 172 4 */
long unsigned int hiwater_vm; /* 176 4 */
long unsigned int total_vm; /* 180 4 */
long unsigned int locked_vm; /* 184 4 */
long unsigned int shared_vm; /* 188 4 */
/* ---------- cacheline 6 boundary ---------- */
long unsigned int exec_vm; /* 192 4 */
long unsigned int stack_vm; /* 196 4 */
long unsigned int reserved_vm; /* 200 4 */
long unsigned int def_flags; /* 204 4 */
long unsigned int nr_ptes; /* 208 4 */
long unsigned int start_code; /* 212 4 */
long unsigned int end_code; /* 216 4 */
long unsigned int start_data; /* 220 4 */
/* ---------- cacheline 7 boundary ---------- */
long unsigned int end_data; /* 224 4 */
long unsigned int start_brk; /* 228 4 */
long unsigned int brk; /* 232 4 */
long unsigned int start_stack; /* 236 4 */
long unsigned int arg_start; /* 240 4 */
long unsigned int arg_end; /* 244 4 */
long unsigned int env_start; /* 248 4 */
long unsigned int env_end; /* 252 4 */
/* ---------- cacheline 8 boundary ---------- */
long unsigned int saved_auxv[44]; /* 256 176 */
cpumask_t cpu_vm_mask; /* 432 4 */
mm_context_t context; /* 436 68 */
long unsigned int swap_token_time; /* 504 4 */
char recent_pagein; /* 508 1 */
unsigned char dumpable:2; /* 509 1 */
/* XXX 2 bytes hole, try to pack */
int core_waiters; /* 512 4 */
struct completion * core_startup_done; /* 516 4 */
struct completion core_done; /* 520 52 */
rwlock_t ioctx_list_lock; /* 572 36 */
struct kioctx * ioctx_list; /* 608 4 */
}; /* size: 612, sum members: 610, holes: 1, sum holes: 2, cachelines: 20,
last cacheline: 4 bytes */
[acme@newtoy net-2.6.20]$ codiff -V /tmp/sched.o.before kernel/sched.o
/pub/scm/linux/kernel/git/acme/net-2.6.20/kernel/sched.c:
struct mm_struct | -4
dumpable:2;
from: unsigned int /* 432(30) 4(2) */
to: unsigned char /* 509(6) 1(2) */
< SNIP other offset changes >
1 struct changed
[acme@newtoy net-2.6.20]$
I'm not aware of any problem about using 2 byte wide bitfields where
previously a 4 byte wide one was, holler if there is any, I wouldn't be
surprised, bitfields are things from hell.
For the curious, 432(30) means: at offset 432 from the struct start, at
offset 30 in the bitfield (yeah, it comes backwards, hellish, huh?) ditto
for 509(6), while 4(2) and 1(2) means "struct field size(bitfield size)".
Now we have a 2 bytes hole and are using only 4 bytes of the last 32
bytes cacheline, any takers? :-)
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Currently we we use the lru head link of the second page of a compound page
to hold its destructor. This was ok when it was purely an internal
implmentation detail. However, hugetlbfs overrides this destructor
violating the layering. Abstract this out as explicit calls, also
introduce a type for the callback function allowing them to be type
checked. For each callback we pre-declare the function, causing a type
error on definition rather than on use elsewhere.
[akpm@osdl.org: cleanups]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_DMA is an alias of GFP_DMA. This is the last one so we
remove the leftover comment too.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_ATOMIC is an alias of GFP_ATOMIC
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_USER is an alias of GFP_USER
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_NOFS is an alias of GFP_NOFS.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_NOIO is an alias of GFP_NOIO with a single instance of use.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
SLAB_LEVEL_MASK is only used internally to the slab and is
and alias of GFP_LEVEL_MASK.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
It is only used internally in the slab.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
x86 NUMA systems only define bootmem for node 0. alloc_bootmem_node() and
friends therefore ignore the passed pgdat and use NODE_DATA(0) in all
cases. This leads to the following warnings as we are not using the passed
parameter:
.../mm/page_alloc.c: In function 'zone_wait_table_init':
.../mm/page_alloc.c:2259: warning: unused variable 'pgdat'
One option would be to define all variables used with these macros
__attribute__ ((unused)), but this would leave us exposed should these
become genuinely unused.
The key here is that we _are_ using the value, we ignore it but that is a
deliberate action. This patch adds a nested local variable within the
alloc_bootmem_node helper to which the pgdat parameter is assigned making
it 'used'. The nested local is marked __attribute__ ((unused)) to silence
this same warning for it.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
NUMA node ids are passed as either int or unsigned int almost exclusivly
page_to_nid and zone_to_nid both return unsigned long. This is a throw
back to when page_to_nid was a #define and was thus exposing the real type
of the page flags field.
In addition to fixing up the definitions of page_to_nid and zone_to_nid I
audited the users of these functions identifying the following incorrect
uses:
1) mm/page_alloc.c show_node() -- printk dumping the node id,
2) include/asm-ia64/pgalloc.h pgtable_quicklist_free() -- comparison
against numa_node_id() which returns an int from cpu_to_node(), and
3) mm/mpolicy.c check_pte_range -- used as an index in node_isset which
uses bit_set which in generic code takes an int.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Remove all uses of kmem_cache_t (the most were left in slab.h). The
typedef for kmem_cache_t is then only necessary for other kernel
subsystems. Add a comment to that effect.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
The names_cachep is used for getname() and putname(). So lets put it into
fs.h near those two definitions.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
fs_cachep is only used in kernel/exit.c and in kernel/fork.c.
It is used to store fs_struct items so it should be placed in linux/fs_struct.h
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
filp_cachep is only used in fs/file_table.c and in fs/dcache.c where
it is defined.
Move it to related definitions in linux/file.h.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Proper place is in file.h since files_cachep uses are rated to file I/O.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
