summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-07-28tcp: do not delay ACK in DCTCP upon CE status changeYuchung Cheng
[ Upstream commit a0496ef2c23b3b180902dd185d0d63ccbc624cf8 ] Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-28tcp: do not cancel delay-AcK on DCTCP special ACKYuchung Cheng
[ Upstream commit 27cde44a259c380a3c09066fc4b42de7dde9b1ad ] Currently when a DCTCP receiver delays an ACK and receive a data packet with a different CE mark from the previous one's, it sends two immediate ACKs acking previous and latest sequences respectly (for ECN accounting). Previously sending the first ACK may mark off the delayed ACK timer (tcp_event_ack_sent). This may subsequently prevent sending the second ACK to acknowledge the latest sequence (tcp_ack_snd_check). The culprit is that tcp_send_ack() assumes it always acknowleges the latest sequence, which is not true for the first special ACK. The fix is to not make the assumption in tcp_send_ack and check the actual ack sequence before cancelling the delayed ACK. Further it's safer to pass the ack sequence number as a local variable into tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid future bugs like this. Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25seccomp: Move speculation migitation control to arch codeThomas Gleixner
commit 8bf37d8c067bb7eb8e7c381bdadf9bd89182b6bc upstream The migitation control is simpler to implement in architecture code as it avoids the extra function call to check the mode. Aside of that having an explicit seccomp enabled mode in the architecture mitigations would require even more workarounds. Move it into architecture code and provide a weak function in the seccomp code. Remove the 'which' argument as this allows the architecture to decide which mitigations are relevant for seccomp. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25seccomp: Add filter flag to opt-out of SSB mitigationKees Cook
commit 00a02d0c502a06d15e07b857f8ff921e3e402675 upstream If a seccomp user is not interested in Speculative Store Bypass mitigation by default, it can set the new SECCOMP_FILTER_FLAG_SPEC_ALLOW flag when adding filters. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25prctl: Add force disable speculationThomas Gleixner
commit 356e4bfff2c5489e016fdb925adbf12a1e3950ee upstream For certain use cases it is desired to enforce mitigations so they cannot be undone afterwards. That's important for loader stubs which want to prevent a child from disabling the mitigation again. Will also be used for seccomp(). The extra state preserving of the prctl state for SSB is a preparatory step for EBPF dymanic speculation control. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25nospec: Allow getting/setting on non-current taskKees Cook
commit 7bbf1373e228840bb0295a2ca26d548ef37f448e upstream Adjust arch_prctl_get/set_spec_ctrl() to operate on tasks other than current. This is needed both for /proc/$pid/status queries and for seccomp (since thread-syncing can trigger seccomp in non-current threads). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25prctl: Add speculation control prctlsThomas Gleixner
commit b617cfc858161140d69cc0b5cc211996b557a1c7 upstream Add two new prctls to control aspects of speculation related vulnerabilites and their mitigations to provide finer grained control over performance impacting mitigations. PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature which is selected with arg2 of prctl(2). The return value uses bit 0-2 with the following meaning: Bit Define Description 0 PR_SPEC_PRCTL Mitigation can be controlled per task by PR_SET_SPECULATION_CTRL 1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is disabled 2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is enabled If all bits are 0 the CPU is not affected by the speculation misfeature. If PR_SPEC_PRCTL is set, then the per task control of the mitigation is available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation misfeature will fail. PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which is selected by arg2 of prctl(2) per task. arg3 is used to hand in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE. The common return values are: EINVAL prctl is not implemented by the architecture or the unused prctl() arguments are not 0 ENODEV arg2 is selecting a not supported speculation misfeature PR_SET_SPECULATION_CTRL has these additional return values: ERANGE arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE ENXIO prctl control of the selected speculation misfeature is disabled The first supported controlable speculation misfeature is PR_SPEC_STORE_BYPASS. Add the define so this can be shared between architectures. Based on an initial patch from Tim Chen and mostly rewritten. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25x86/bugs: Expose /sys/../spec_store_bypassKonrad Rzeszutek Wilk
commit c456442cd3a59eeb1d60293c26cbe2ff2c4e42cf upstream Add the sysfs file for the new vulerability. It does not do much except show the words 'Vulnerable' for recent x86 cores. Intel cores prior to family 6 are known not to be vulnerable, and so are some Atoms and some Xeon Phi. It assumes that older Cyrix, Centaur, etc. cores are immune. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by: Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by: Alexey Makhalov <amakhalov@vmware.com> Reviewed-by: Bo Gan <ganb@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25net: Don't copy pfmemalloc flag in __copy_skb_header()Stefano Brivio
[ Upstream commit 8b7008620b8452728cadead460a36f64ed78c460 ] The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b19372273164 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc7be6 ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by: Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e03e8 ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-25ipv6: fix useless rol32 call on hashColin Ian King
[ Upstream commit 169dc027fb02492ea37a0575db6a658cf922b854 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22compiler-gcc.h: Add __attribute__((gnu_inline)) to all inline declarationsNick Desaulniers
commit d03db2bc26f0e4a6849ad649a09c9c73fccdc656 upstream. Functions marked extern inline do not emit an externally visible function when the gnu89 C standard is used. Some KBUILD Makefiles overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without an explicit C standard specified, the default is gnu11. Since c99, the semantics of extern inline have changed such that an externally visible function is always emitted. This can lead to multiple definition errors of extern inline functions at link time of compilation units whose build files have removed an explicit C standard compiler flag for users of GCC 5.1+ or Clang. Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: H. Peter Anvin <hpa@zytor.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: sedat.dilek@gmail.com Cc: thomas.lendacky@amd.com Cc: tstellar@redhat.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-2-ndesaulniers@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22compiler, clang: always inline when CONFIG_OPTIMIZE_INLINING is disabledDavid Rientjes
commit 9a04dbcfb33b4012d0ce8c0282f1e3ca694675b1 upstream. The motivation for commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") was to suppress clang's warnings about unused static inline functions. For configs without CONFIG_OPTIMIZE_INLINING enabled, such as any non-x86 architecture, `inline' in the kernel implies that __attribute__((always_inline)) is used. Some code depends on that behavior, see https://lkml.org/lkml/2017/6/13/918: net/built-in.o: In function `__xchg_mb': arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99' arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99 The full fix would be to identify these breakages and annotate the functions with __always_inline instead of `inline'. But since we are late in the 4.12-rc cycle, simply carry forward the forced inlining behavior and work toward moving arm64, and other architectures, toward CONFIG_OPTIMIZE_INLINING behavior. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706261552200.1075@chino.kir.corp.google.com Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Sodagudi Prasad <psodagud@codeaurora.org> Tested-by: Sodagudi Prasad <psodagud@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22compiler, clang: properly override 'inline' for clangLinus Torvalds
commit 6d53cefb18e4646fb4bf62ccb6098fb3808486df upstream. Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22compiler, clang: suppress warning for unused static inline functionsDavid Rientjes
commit abb2ea7dfd82451d85ce669b811310c05ab5ca46 upstream. GCC explicitly does not warn for unused static inline functions for -Wunused-function. The manual states: Warn whenever a static function is declared but not defined or a non-inline static function is unused. Clang does warn for static inline functions that are unused. It turns out that suppressing the warnings avoids potentially complex #ifdef directives, which also reduces LOC. Suppress the warning for clang. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-17ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOSHans de Goede
commit 240630e61870e62e39a97225048f9945848fa5f5 upstream. There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03Bluetooth: Fix connection if directed advertising and privacy is usedSzymon Janc
commit 082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03block: Fix transfer when chunk sectors exceeds maxKeith Busch
commit 15bfd21fbc5d35834b9ea383dc458a1f0c9e3434 upstream. A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: <stable@vger.kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03iio:buffer: make length types match kfifo typesMartin Kelly
commit c043ec1ca5baae63726aae32abbe003192bc6eec upstream. Currently, we use int for buffer length and bytes_per_datum. However, kfifo uses unsigned int for length and size_t for element size. We need to make sure these matches or we will have bugs related to overflow (in the range between INT_MAX and UINT_MAX for length, for example). In addition, set_bytes_per_datum uses size_t while bytes_per_datum is an int, which would cause bugs for large values of bytes_per_datum. Change buffer length to use unsigned int and bytes_per_datum to use size_t. Signed-off-by: Martin Kelly <mkelly@xevo.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [bwh: Backported to 4.4: - Drop change to iio_dma_buffer_set_length() - Adjust filename, context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03branch-check: fix long->int truncation when profiling branchesMikulas Patocka
commit 2026d35741f2c3ece73c11eb7e4a15d7c2df9ebe upstream. The function __builtin_expect returns long type (see the gcc documentation), and so do macros likely and unlikely. Unfortunatelly, when CONFIG_PROFILE_ANNOTATED_BRANCHES is selected, the macros likely and unlikely expand to __branch_check__ and __branch_check__ truncates the long type to int. This unintended truncation may cause bugs in various kernel code (we found a bug in dm-writecache because of it), so it's better to fix __branch_check__ to return long. Link: http://lkml.kernel.org/r/alpine.LRH.2.02.1805300818140.24812@file01.intranet.prod.int.rdu2.redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 1f0d69a9fc815 ("tracing: profile likely and unlikely annotations") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-16Clarify (and fix) MAX_LFS_FILESIZE macrosLinus Torvalds
commit 0cc3b0ec23ce4c69e1e890ed2b8d2fa932b14aad upstream. We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by: Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael Tinoco <rafael.tinoco@linaro.org> [backported to 4.4.y due to requests of failed LTP tests - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06tcp: avoid integer overflows in tcp_rcv_space_adjust()Eric Dumazet
commit 607065bad9931e72207b0cac365d7d4abc06bd99 upstream. When using large tcp_rmem[2] values (I did tests with 500 MB), I noticed overflows while computing rcvwin. Lets fix this before the following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Wei Wang <weiwan@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [Backport: sysctl_tcp_rmem is not Namespace-ify'd in older kernels] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-06cfg80211: further limit wiphy names to 64 bytesEric Biggers
commit 814596495dd2b9d4aab92d8f89cf19060d25d2ea upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb7594 ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30usb: gadget: composite: fix incorrect handling of OS desc requestsChris Dickens
[ Upstream commit 5d6ae4f0da8a64a185074dabb1b2f8c148efa741 ] When handling an OS descriptor request, one of the first operations is to zero out the request buffer using the wLength from the setup packet. There is no bounds checking, so a wLength > 4096 would clobber memory adjacent to the request buffer. Fix this by taking the min of wLength and the request buffer length prior to the memset. While at it, define the buffer length in a header file so that magic numbers don't appear throughout the code. When returning data to the host, the data length should be the min of the wLength and the valid data we have to return. Currently we are returning wLength, thus requests for a wLength greater than the amount of data in the OS descriptor buffer would return invalid (albeit zero'd) data following the valid descriptor data. Fix this by counting the number of bytes when constructing the data and using this when determining the length of the request. Signed-off-by: Chris Dickens <christopher.a.dickens@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30llc: properly handle dev_queue_xmit() return valueCong Wang
[ Upstream commit b85ab56c3f81c5a24b5a5213374f549df06430da ] llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by: Noam Rathaus <noamr@beyondsecurity.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30net: Fix vlan untag for bridge and vlan_dev with reorder_hdr offToshiaki Makita
[ Upstream commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61 ] When we have a bridge with vlan_filtering on and a vlan device on top of it, packets would be corrupted in skb_vlan_untag() called from br_dev_xmit(). The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(), which makes use of skb->mac_len. In this function mac_len is meant for handling rx path with vlan devices with reorder_header disabled, but in tx path mac_len is typically 0 and cannot be used, which is the problem in this case. The current code even does not properly handle rx path (skb_vlan_untag() called from __netif_receive_skb_core()) with reorder_header off actually. In rx path single tag case, it works as follows: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+------+---- | ETH | VLAN | ETH | | ADDRS | TPID | TCI | TYPE | +-------------------+-------------+------+---- <-------- mac_len ---------> <-------------> to be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <-------- mac_len ---------> This is ok, but in rx double tag case, it corrupts packets: - Before skb_reorder_vlan_header() mac_header data v v +-------------------+-------------+-------------+------+---- | ETH | VLAN | VLAN | ETH | | ADDRS | TPID | TCI | TPID | TCI | TYPE | +-------------------+-------------+-------------+------+---- <--------------- mac_len ----------------> <-------------> should be removed <---------------------------> actually will be removed - After skb_reorder_vlan_header() mac_header data v v +-------------------+------+---- | ETH | ETH | | ADDRS | TYPE | +-------------------+------+---- <--------------- mac_len ----------------> So, two of vlan tags are both removed while only inner one should be removed and mac_header (and mac_len) is broken. skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2), so use skb->data and skb->mac_header to calculate the right offset. Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com> Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off") Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmtuSabrina Dubroca
[ Upstream commit d52e5a7e7ca49457dd31fc8b42fb7c0d58a31221 ] Prior to the rework of PMTU information storage in commit 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."), when a PMTU event advertising a PMTU smaller than net.ipv4.route.min_pmtu was received, we would disable setting the DF flag on packets by locking the MTU metric, and set the PMTU to net.ipv4.route.min_pmtu. Since then, we don't disable DF, and set PMTU to net.ipv4.route.min_pmtu, so the intermediate router that has this link with a small MTU will have to drop the packets. This patch reestablishes pre-2.6.39 behavior by splitting rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu. rt_mtu_locked indicates that we shouldn't set the DF bit on that path, and is checked in ip_dont_fragment(). One possible workaround is to set net.ipv4.route.min_pmtu to a value low enough to accommodate the lowest MTU encountered. Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30virtio-gpu: fix ioctl and expose the fixed status to userspace.Dave Airlie
[ Upstream commit 9a191b114906457c4b2494c474f58ae4142d4e67 ] This exposes to mesa that it can use the fixed ioctl for querying later cap sets, cap set 1 is forever frozen in time. Signed-off-by: Dave Airlie <airlied@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180221015003.22884-1-airlied@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30regulatory: add NUL to request alpha2Johannes Berg
[ Upstream commit 657308f73e674e86b60509a430a46e569bf02846 ] Similar to the ancient commit a5fe8e7695dc ("regulatory: add NUL to alpha2"), add another byte to alpha2 in the request struct so that when we use nla_put_string(), we don't overrun anything. Fixes: 73d54c9e74c4 ("cfg80211: add regulatory netlink multicast group") Reported-by: Kees Cook <keescook@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4Felix Fietkau
[ Upstream commit 651b9920d7a694ffb1f885aef2bbb068a25d9d66 ] This ensures that mac80211 allocated management frames are properly aligned, which makes copying them more efficient. For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon template memory on the chip. Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be avoided. Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30x86/power: Fix swsusp_arch_resume prototypeArnd Bergmann
[ Upstream commit 328008a72d38b5bde6491e463405c34a81a65d3e ] The declaration for swsusp_arch_resume marks it as 'asmlinkage', but the definition in x86-32 does not, and it fails to include the header with the declaration. This leads to a warning when building with link-time-optimizations: kernel/power/power.h:108:23: error: type of 'swsusp_arch_resume' does not match original declaration [-Werror=lto-type-mismatch] extern asmlinkage int swsusp_arch_resume(void); ^ arch/x86/power/hibernate_32.c:148:0: note: 'swsusp_arch_resume' was previously declared here int swsusp_arch_resume(void) This moves the declaration into a globally visible header file and fixes up both x86 definitions to match it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <len.brown@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Nicolas Pitre <nico@linaro.org> Cc: linux-pm@vger.kernel.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Bart Van Assche <bart.vanassche@wdc.com> Link: https://lkml.kernel.org/r/20180202145634.200291-2-arnd@arndb.de Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30asm-generic: provide generic_pmdp_establish()Kirill A. Shutemov
[ Upstream commit c58f0bb77ed8bf93dfdde762b01cb67eebbdfc29 ] Patch series "Do not lose dirty bit on THP pages", v4. Vlastimil noted that pmdp_invalidate() is not atomic and we can lose dirty and access bits if CPU sets them after pmdp dereference, but before set_pmd_at(). The bug can lead to data loss, but the race window is tiny and I haven't seen any reports that suggested that it happens in reality. So I don't think it worth sending it to stable. Unfortunately, there's no way to address the issue in a generic way. We need to fix all architectures that support THP one-by-one. All architectures that have THP supported have to provide atomic pmdp_invalidate() that returns previous value. If generic implementation of pmdp_invalidate() is used, architecture needs to provide atomic pmdp_estabish(). pmdp_estabish() is not used out-side generic implementation of pmdp_invalidate() so far, but I think this can change in the future. This patch (of 12): This is an implementation of pmdp_establish() that is only suitable for an architecture that doesn't have hardware dirty/accessed bits. In this case we can't race with CPU which sets these bits and non-atomic approach is fine. Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Daney <david.daney@cavium.com> Cc: David Miller <davem@davemloft.net> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nitin Gupta <nitin.m.gupta@oracle.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into ↵Anna-Maria Gleixner
account [ Upstream commit 91633eed73a3ac37aaece5c8c1f93a18bae616a9 ] So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for detecting the ABS or REL timer modes is not valid anymore, it got broken by the introduction of HRTIMER_MODE_PINNED. HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the sake of completeness print all given modes. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30do d_instantiate/unlock_new_inode combinations safelyAl Viro
commit 1e2e547a93a00ebc21582c06ca3c6cfea2a309ee upstream. For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by: Mike Marshall <hubcap@omnibond.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26cfg80211: limit wiphy names to 128 bytesJohannes Berg
commit a7cfebcb7594a24609268f91299ab85ba064bf82 upstream. There's currently no limit on wiphy names, other than netlink message size and memory limitations, but that causes issues when, for example, the wiphy name is used in a uevent, e.g. in rfkill where we use the same name for the rfkill instance, and then the buffer there is "only" 2k for the environment variables. This was reported by syzkaller, which used a 4k name. Limit the name to something reasonable, I randomly picked 128. Reported-by: syzbot+230d9e642a85d3fec29c@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accountingJohn Stultz
commit 3d88d56c5873f6eebe23e05c3da701960146b801 upstream. Due to how the MONOTONIC_RAW accumulation logic was handled, there is the potential for a 1ns discontinuity when we do accumulations. This small discontinuity has for the most part gone un-noticed, but since ARM64 enabled CLOCK_MONOTONIC_RAW in their vDSO clock_gettime implementation, we've seen failures with the inconsistency-check test in kselftest. This patch addresses the issue by using the same sub-ns accumulation handling that CLOCK_MONOTONIC uses, which avoids the issue for in-kernel users. Since the ARM64 vDSO implementation has its own clock_gettime calculation logic, this patch reduces the frequency of errors, but failures are still seen. The ARM64 vDSO will need to be updated to include the sub-nanosecond xtime_nsec values in its calculation for this issue to be completely fixed. Signed-off-by: John Stultz <john.stultz@linaro.org> Tested-by: Daniel Mentz <danielmentz@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Will Deacon <will.deacon@arm.com> Cc: "stable #4 . 8+" <stable@vger.kernel.org> Cc: Miroslav Lichvar <mlichvar@redhat.com> Link: http://lkml.kernel.org/r/1496965462-20003-3-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> [fabrizio: cherry-pick to 4.4. Kept cycle_t type for function logarithmic_accumulation local variable "interval". Dropped casting of "interval" variable] Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26dmaengine: ensure dmaengine helpers check valid callbackVinod Koul
commit 757d12e5849be549076901b0d33c60d5f360269c upstream. dmaengine has various device callbacks and exposes helper functions to invoke these. These helpers should check if channel, device and callback is valid or not before invoking them. Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Jianming Qiao <jianming.qiao@bp.renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26efi: Avoid potential crashes, fix the 'struct efi_pci_io_protocol_32' ↵Ard Biesheuvel
definition for mixed mode commit 0b3225ab9407f557a8e20f23f37aa7236c10a9b1 upstream. Mixed mode allows a kernel built for x86_64 to interact with 32-bit EFI firmware, but requires us to define all struct definitions carefully when it comes to pointer sizes. 'struct efi_pci_io_protocol_32' currently uses a 'void *' for the 'romimage' field, which will be interpreted as a 64-bit field on such kernels, potentially resulting in bogus memory references and subsequent crashes. Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20180504060003.19618-13-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26tracing/x86/xen: Remove zero data size trace events ↵Steven Rostedt (VMware)
trace_xen_mmu_flush_tlb{_all} commit 45dd9b0666a162f8e4be76096716670cf1741f0e upstream. Doing an audit of trace events, I discovered two trace events in the xen subsystem that use a hack to create zero data size trace events. This is not what trace events are for. Trace events add memory footprint overhead, and if all you need to do is see if a function is hit or not, simply make that function noinline and use function tracer filtering. Worse yet, the hack used was: __array(char, x, 0) Which creates a static string of zero in length. There's assumptions about such constructs in ftrace that this is a dynamic string that is nul terminated. This is not the case with these tracepoints and can cause problems in various parts of ftrace. Nuke the trace events! Link: http://lkml.kernel.org/r/20180509144605.5a220327@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 95a7d76897c1e ("xen/mmu: Use Xen specific TLB flush instead of the generic one.") Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26signals: avoid unnecessary taking of sighand->siglockWaiman Long
commit c7be96af89d4b53211862d8599b2430e8900ed92 upstream. When running certain database workload on a high-end system with many CPUs, it was found that spinlock contention in the sigprocmask syscalls became a significant portion of the overall CPU cycles as shown below. 9.30% 9.30% 905387 dataserver /proc/kcore 0x7fff8163f4d2 [k] _raw_spin_lock_irq | ---_raw_spin_lock_irq | |--99.34%-- __set_current_blocked | sigprocmask | sys_rt_sigprocmask | system_call_fastpath | | | |--50.63%-- __swapcontext | | | | | |--99.91%-- upsleepgeneric | | | |--49.36%-- __setcontext | | ktskRun Looking further into the swapcontext function in glibc, it was found that the function always call sigprocmask() without checking if there are changes in the signal mask. A check was added to the __set_current_blocked() function to avoid taking the sighand->siglock spinlock if there is no change in the signal mask. This will prevent unneeded spinlock contention when many threads are trying to call sigprocmask(). With this patch applied, the spinlock contention in sigprocmask() was gone. Link: http://lkml.kernel.org/r/1474979209-11867-1-git-send-email-Waiman.Long@hpe.com Signed-off-by: Waiman Long <Waiman.Long@hpe.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Stas Sergeev <stsp@list.ru> Cc: Scott J Norton <scott.norton@hpe.com> Cc: Douglas Hatch <doug.hatch@hpe.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26futex: Remove duplicated code and fix undefined behaviourJiri Slaby
commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream. There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390] Acked-by: Chris Metcalf <cmetcalf@mellanox.com> [for tile] Reviewed-by: Darren Hart (VMware) <dvhart@infradead.org> Reviewed-by: Will Deacon <will.deacon@arm.com> [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker <dalias@libc.org> Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn <jonas@southpole.se> Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Stafford Horne <shorne@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson <rth@twiddle.net> Cc: Chris Zankel <chris@zankel.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16soreuseport: initialise timewait reuseport fieldEric Dumazet
commit 3099a52918937ab86ec47038ad80d377ba16c531 upstream. syzbot reported an uninit-value in inet_csk_bind_conflict() [1] It turns out we never propagated sk->sk_reuseport into timewait socket. [1] BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320 inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4416e9 RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9 RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004 RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08 R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478 R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756 inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: da5e36308d9f ("soreuseport: TCP/IPv4 implementation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16net: fix rtnh_ok()Eric Dumazet
commit b1993a2de12c9e75c35729e2ffbc3a92d50c0d31 upstream. syzbot reported : BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline] BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline] BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091 @remaining is an integer, coming from user space. If it is negative we want rtnh_ok() to return false. Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16mac80211: Add RX flag to indicate ICV strippedDavid Spinadel
commit cef0acd4d7d4811d2d19cd0195031bf0dfe41249 upstream. Add a flag that indicates that the WEP ICV was stripped from an RX packet, allowing the device to not transfer that if it's already checked. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16mac80211: allow same PN for AMSDU sub-framesSara Sharon
commit f631a77ba920f7153a1094d09cd8f2ebbffd0328 upstream. Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16mac80211: allow not sending MIC up from driver for HW cryptoSara Sharon
commit f980ebc058c2fa2a552e495db1de0b330082ab70 upstream. When HW crypto is used, there's no need for the CCMP/GCMP MIC to be available to mac80211, and the hardware might have removed it already after checking. The MIC is also useless to have when the frame is already decrypted, so allow indicating that it's not present. Since we are running out of bits in mac80211_rx_flags, make the flags field a u64. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Cc: Sriram R <srirrama@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.Joakim Tjernlund
commit 6510bbc88e3258631831ade49033537081950605 upstream. Currently it is possible to read and/or write to suspend EB's. Writing /dev/mtdX or /dev/mtdblockX from several processes may break the flash state machine. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com> Cc: <stable@vger.kernel.org> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02ALSA: control: Hardening for potential Spectre v1Takashi Iwai
commit 088e861edffb84879cf0c0d1b02eda078c3a0ffe upstream. As recently Smatch suggested, a few places in ALSA control core codes may expand the array directly from the user-space value with speculation: sound/core/control.c:1003 snd_ctl_elem_lock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:1031 snd_ctl_elem_unlock() warn: potential spectre issue 'kctl->vd' sound/core/control.c:844 snd_ctl_elem_info() warn: potential spectre issue 'kctl->vd' sound/core/control.c:891 snd_ctl_elem_read() warn: potential spectre issue 'kctl->vd' sound/core/control.c:939 snd_ctl_elem_write() warn: potential spectre issue 'kctl->vd' Although all these seem doing only the first load without further reference, we may want to stay in a safer side, so hardening with array_index_nospec() would still make sense. In this patch, we put array_index_nospec() to the common snd_ctl_get_ioff*() helpers instead of each caller. These helpers are also referred from some drivers, too, and basically all usages are to calculate the array index from the user-space value, hence it's better to cover there. BugLink: https://marc.info/?l=linux-kernel&m=152411496503418&w=2 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02tty: Don't call panic() at tty_ldisc_init()Tetsuo Handa
commit 903f9db10f18f735e62ba447147b6c434b6af003 upstream. syzbot is reporting kernel panic [1] triggered by memory allocation failure at tty_ldisc_get() from tty_ldisc_init(). But since both tty_ldisc_get() and caller of tty_ldisc_init() can cleanly handle errors, tty_ldisc_init() does not need to call panic() when tty_ldisc_get() failed. [1] https://syzkaller.appspot.com/bug?id=883431818e036ae6a9981156a64b821110f39187 Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-02virtio: add ability to iterate over vqsMichael S. Tsirkin
commit 24a7e4d20783c0514850f24a5c41ede46ab058f0 upstream. For cleanup it's helpful to be able to simply scan all vqs and discard all data. Add an iterator to do that. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multiToshiaki Makita
[ Upstream commit 7ce2367254e84753bceb07327aaf5c953cfce117 ] Syzkaller spotted an old bug which leads to reading skb beyond tail by 4 bytes on vlan tagged packets. This is caused because skb_vlan_tagged_multi() did not check skb_headlen. BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline] BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline] BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline] BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 eth_type_vlan include/linux/if_vlan.h:283 [inline] skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] vlan_features_check include/linux/if_vlan.h:672 [inline] dflt_features_check net/core/dev.c:2949 [inline] netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084 __dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43ffa9 RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0 R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 58e998c6d239 ("offloading: Force software GSO for multiple vlan tags.") Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2025-08-05 23:43:58 +0000