| Age | Commit message (Collapse) | Author |
|---|
|
After commit b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node"),
the list_node field is reused for both the xskb pool list and the buffer
free list, this causes a buffer leak as described below.
xp_free() checks if a buffer is already on the free list using
list_empty(&xskb->list_node). When list_del() is used to remove a node
from the xskb pool list, it doesn't reinitialize the node pointers.
This means list_empty() will return false even after the node has been
removed, causing xp_free() to incorrectly skip adding the buffer to the
free list.
Fix this by using list_del_init() instead of list_del() in all fragment
handling paths, this ensures the list node is reinitialized after removal,
allowing the list_empty() to work correctly.
Fixes: b692bf9a7543 ("xsk: Get rid of xdp_buff_xsk::xskb_list_node")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Link: https://patch.msgid.link/20260225000456.107806-2-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TRENDnet TUC-ET2G is a RTL8156 based usb ethernet adapter. Add its
vendor and product IDs.
Signed-off-by: Valentin Spreckels <valentin@spreckels.dev>
Link: https://patch.msgid.link/20260226195409.7891-2-valentin@spreckels.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As Paolo said earlier [1]:
"Since the blamed commit below, classify can return TC_ACT_CONSUMED while
the current skb being held by the defragmentation engine. As reported by
GangMin Kim, if such packet is that may cause a UaF when the defrag engine
later on tries to tuch again such packet."
act_ct was never meant to be used in the egress path, however some users
are attaching it to egress today [2]. Attempting to reach a middle
ground, we noticed that, while most qdiscs are not handling
TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we
address the issue by only allowing act_ct to bind to clsact/ingress
qdiscs and shared blocks. That way it's still possible to attach act_ct to
egress (albeit only with clsact).
[1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/
[2] https://lore.kernel.org/netdev/cc6bfb4a-4a2b-42d8-b9ce-7ef6644fb22b@ovn.org/
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Fixes: 3f14b377d01d ("net/sched: act_ct: fix skb leak and crash on ooo frags")
CC: stable@vger.kernel.org
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260225134349.1287037-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UDP/TCP lookups are using RCU, thus isk->inet_num accesses
should use READ_ONCE() and WRITE_ONCE() where needed.
Fixes: 3ab5aee7fe84 ("net: Convert TCP & DCCP hash tables to use RCU / hlist_nulls")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260225203545.1512417-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The gate action can be replaced while the hrtimer callback or dump path is
walking the schedule list.
Convert the parameters to an RCU-protected snapshot and swap updates under
tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits
the entry list, preserve the existing schedule so the effective state is
unchanged.
Fixes: a51c328df310 ("net: qos: introduce a gate control flow action")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260223150512.2251594-2-p@1g4.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
|
|
Two administrator processes may race when setting child_ns_mode as one
process sets child_ns_mode to "local" and then creates a namespace, but
another process changes child_ns_mode to "global" between the write and
the namespace creation. The first process ends up with a namespace in
"global" mode instead of "local". While this can be detected after the
fact by reading ns_mode and retrying, it is fragile and error-prone.
Make child_ns_mode write-once so that a namespace manager can set it
once and be sure it won't change. Writing a different value after the
first write returns -EBUSY. This applies to all namespaces, including
init_net, where an init process can write "local" to lock all future
namespaces into local mode.
Fixes: eafb64f40ca4 ("vsock: add netns to vsock core")
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-2-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix an uninitialized variable in file_getattr().
The flags_valid field wasn't initialized before calling
vfs_fileattr_get(), triggering KMSAN uninit-value reports in fuse
- Fix writeback wakeup and logging timeouts when DETECT_HUNG_TASK is
not enabled.
sysctl_hung_task_timeout_secs is 0 in that case causing spurious
"waiting for writeback completion for more than 1 seconds" warnings
- Fix a null-ptr-deref in do_statmount() when the mount is internal
- Add missing kernel-doc description for the @private parameter in
iomap_readahead()
- Fix mount namespace creation to hold namespace_sem across the mount
copy in create_new_namespace().
The previous drop-and-reacquire pattern was fragile and failed to
clean up mount propagation links if the real rootfs was a shared or
dependent mount
- Fix /proc mount iteration where m->index wasn't updated when
m->show() overflows, causing a restart to repeatedly show the same
mount entry in a rapidly expanding mount table
- Return EFSCORRUPTED instead of ENOSPC in minix_new_inode() when the
inode number is out of range
- Fix unshare(2) when CLONE_NEWNS is set and current->fs isn't shared.
copy_mnt_ns() received the live fs_struct so if a subsequent
namespace creation failed the rollback would leave pwd and root
pointing to detached mounts. Always allocate a new fs_struct when
CLONE_NEWNS is requested
- fserror bug fixes:
- Remove the unused fsnotify_sb_error() helper now that all callers
have been converted to fserror_report_metadata
- Fix a lockdep splat in fserror_report() where igrab() takes
inode::i_lock which can be held in IRQ context.
Replace igrab() with a direct i_count bump since filesystems
should not report inodes that are about to be freed or not yet
exposed
- Handle error pointer in procfs for try_lookup_noperm()
- Fix an integer overflow in ep_loop_check_proc() where recursive calls
returning INT_MAX would overflow when +1 is added, breaking the
recursion depth check
- Fix a misleading break in pidfs
* tag 'vfs-7.0-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: avoid misleading break
eventpoll: Fix integer overflow in ep_loop_check_proc()
proc: Fix pointer error dereference
fserror: fix lockdep complaint when igrabbing inode
fsnotify: drop unused helper
unshare: fix unshare_fs() handling
minix: Correct errno in minix_new_inode
namespace: fix proc mount iteration
mount: hold namespace_sem across copy in create_new_namespace()
iomap: Describe @private in iomap_readahead()
statmount: Fix the null-ptr-deref in do_statmount()
writeback: Fix wakeup and logging timeouts for !DETECT_HUNG_TASK
fs: init flags_valid before calling vfs_fileattr_get
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- purge error queues in socket destructors
- hci_sync: Fix CIS host feature condition
- L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
- L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
- L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
- L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
- L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
- hci_qca: Cleanup on all setup failures
* tag 'for-net-2026-02-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
Bluetooth: L2CAP: Fix not checking output MTU is acceptable on L2CAP_ECRED_CONN_REQ
Bluetooth: Fix CIS host feature condition
Bluetooth: L2CAP: Fix response to L2CAP_ECRED_CONN_REQ
Bluetooth: hci_qca: Cleanup on all setup failures
Bluetooth: purge error queues in socket destructors
Bluetooth: L2CAP: Fix result of L2CAP_ECRED_CONN_RSP when MTU is too short
Bluetooth: L2CAP: Fix invalid response to L2CAP_ECRED_RECONF_REQ
====================
Link: https://patch.msgid.link/20260223211634.3800315-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared.
Link: https://lore.kernel.org/all/20260205145104.iWinkXHv@linutronix.de
Fixes: b245be1f4db1a ("net-timestamp: no-payload only sysctl")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260220183858.N4ERjFW6@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The default_gfp() helper that I added is not wrong, but it turns out
that it causes unnecessary headaches for 'sparse' which doesn't support
the use of __VA_OPT__ (introduced in C++20 and C23, and supported by gcc
and clang for a long time).
We do already use __VA_OPT__ in some other cases in the kernel (drm/xe
and btrfs), but it has been fairly limited. Now it triggers for pretty
much everything, and sparse ends up not working at all.
We can use the traditional gcc ',##__VA_ARGS__' syntax instead: it may
not be the "C standard" way and is slightly less natural in this
context, but it is the traditional model for this and avoids the sparse
problem.
Reported-and-tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reported-and-tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: e19e1b480ac7 ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull fsverity fixes from Eric Biggers:
- Fix a build error on parisc
- Remove the non-large-folio-aware function fsverity_verify_page()
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: fix build error by adding fsverity_readahead() stub
fsverity: remove fsverity_verify_page()
f2fs: make f2fs_verify_cluster() partially large-folio-aware
f2fs: remove unnecessary ClearPageUptodate in f2fs_verify_cluster()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fix from Steven Rostedt:
- Fix multiple definition of __pcpu_unique_da_mon_this
After refactoring monitors, we used static per-cpu variables with the
same names across different per-cpu monitors. This is explicitly
disallowed for modules on some architectures (alpha) or if
CONFIG_DEBUG_FORCE_WEAK_PER_CPU is enabled (e.g. Fedora's debug
kernel). Make sure all those variables have different names to avoid
compilation issues.
* tag 'trace-rv-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix multiple definition of __pcpu_unique_da_mon_this
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Most simple allocations use GFP_KERNEL, and with the new allocation
helpers being introduced, let's just take advantage of that to simplify
that default case.
It's a numbers game:
git grep 'alloc_obj(' |
sed 's/.*\(GFP_[_A-Z]*\).*/\1/' |
sort | uniq -c | sort -n | tail
shows that about 90% of all those new allocator instances just use that
standard GFP_KERNEL.
Those helpers are already macros, and we can easily just make it be the
default case when the gfp argument is missing.
And yes, we could do that for all the legacy interfaces too, but let's
keep it to just the new ones at least for now, since those all got
converted recently anyway, so this is not any "extra" noise outside of
that limited conversion.
And, in fact, I want to do this before doing the -rc1 release, exactly
so that we don't get extra merge conflicts.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for
non-scalar types") started using the new allocation helpers, and in the
process showed that they were completely non-working.
The overflow logic in overflows_flex_counter_type() is completely the
wrong way around, and that broke __alloc_flex() completely. By chance,
the resulting code was then such a mess that clang generated
sufficiently garbage code that objtool warned about it all. Which made
it somewhat quicker to narrow things down.
While fixing overflows_flex_counter_type() would presumably fix this
all, I'm excising the whole broken overflow logic from __alloc_flex(),
because we don't want that kind of code in basic allocation functions
anyway.
That (no longer) broken overflows_flex_counter_type() thing needs to be
inserted into the actual __set_flex_counter() logic in the unlikely case
that we ever want this at all. And made conditional.
Fixes: 81cee9166a90 ("compiler_types: Introduce __flex_counter() and family")
Fixes: 69050f8d6d07 ("treewide: Replace kmalloc with kmalloc_obj for non-scalar types")
Cc: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/all/CAHk-=whEd020BYzGTzYrENjD9Z5_82xx6h8HsQvH5xDSnv0=Hw@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kmalloc_obj conversion from Kees Cook:
"This does the tree-wide conversion to kmalloc_obj() and friends using
coccinelle, with a subsequent small manual cleanup of whitespace
alignment that coccinelle does not handle.
This uncovered a clang bug in __builtin_counted_by_ref(), so the
conversion is preceded by disabling that for current versions of
clang. The imminent clang 22.1 release has the fix.
I've done allmodconfig build tests for x86_64, arm64, i386, and arm. I
did defconfig builds for alpha, m68k, mips, parisc, powerpc, riscv,
s390, sparc, sh, arc, csky, xtensa, hexagon, and openrisc"
* tag 'kmalloc_obj-treewide-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kmalloc_obj: Clean up after treewide replacements
treewide: Replace kmalloc with kmalloc_obj for non-scalar types
compiler_types: Disable __builtin_counted_by_ref for Clang
|
|
Pull NTB (PCIe non-transparent bridge) updates from Jon Mason:
"NTB updates include debugfs improvements, correctness fixes, cleanups,
and new hardware support:
ntb_transport QP stats are converted to seq_file, a tx_memcpy_offload
module parameter is introduced with associated ordering fixes, and a
debugfs queue name truncation bug is corrected.
Additional fixes address format specifier mismatches in ntb_tool and
boundary conditions in the Switchtec driver, while unused MSI helpers
are removed and the codebase migrates to dma_map_phys().
Intel Gen6 (Diamond Rapids) NTB support is also added"
* tag 'ntb-7.0' of https://github.com/jonmason/ntb:
NTB: ntb_transport: Use seq_file for QP stats debugfs
NTB: ntb_transport: Fix too small buffer for debugfs_name
ntb/ntb_tool: correct sscanf format for u64 and size_t in tool_peer_mw_trans_write
ntb: intel: Add Intel Gen6 NTB support for DiamondRapids
NTB/msi: Remove unused functions
ntb: ntb_hw_switchtec: Increase MAX_MWS limit to 256
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut
NTB: epf: allow built-in build
ntb: migrate to dma_map_phys instead of map_page
NTB: ntb_transport: Add 'tx_memcpy_offload' module option
NTB: ntb_transport: Remove unused 'retries' field from ntb_queue_entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- A fix for a missing URING_CMD128 opcode check, fixing an issue with
the SQE mixed mode support introduced in 6.19. Merged late due to
having multiple dependencies
- Add sqe->cmd size checking for big SQEs, similar to what we have for
normal sized SQEs
- Fix a race condition in zcrx, that leads to a double free
* tag 'io_uring-20260221' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: Add size check for sqe->cmd
io_uring: add IORING_OP_URING_CMD128 to opcode checks
io_uring/zcrx: fix user_ref race between scrub and refill paths
|
|
Coccinelle doesn't handle re-indenting line escapes. Fix the 2 places
where these got misaligned.
Remove 2 now-redundant type casts, found with:
$ git grep -P 'struct (\S+).*\)\s*k\S+alloc_(objs?|flex)\(struct \1'
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Unfortunately, there is a corner case of __builtin_counted_by_ref()
usage that crashes[1] Clang since support was introduced in Clang 19.
Disable it prior to Clang 22. Found while tested kmalloc_obj treewide
refactoring (via kmalloc_flex() usage).
Link: https://github.com/llvm/llvm-project/issues/182575 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"This is the fixes and cleanups for the end of the merge window, it's
nearly all amdgpu, with some amdkfd, then a pagemap core fix, i915/xe
display fixes, and some xe driver fixes.
Nothing seems out of the ordinary, except amdgpu is a little more
volume than usual.
pagemap:
- drm/pagemap: pass pagemap_addr by reference
amdgpu:
- DML 2.1 fixes
- Panel replay fixes
- Display writeback fixes
- MES 11 old firmware compat fix
- DC CRC improvements
- DPIA fixes
- XGMI fixes
- ASPM fix
- SMU feature bit handling fixes
- DC LUT fixes
- RAS fixes
- Misc memory leak in error path fixes
- SDMA queue reset fixes
- PG handling fixes
- 5 level GPUVM page table fix
- SR-IOV fix
- Queue reset fix
- SMU 13.x fixes
- DC resume lag fix
- MPO fixes
- DCN 3.6 fix
- VSDB fixes
- HWSS clean up
- Replay fixes
- DCE cursor fixes
- DCN 3.5 SR DDR5 latency fixes
- HPD fixes
- Error path unwind fixes
- SMU13/14 mode1 reset fixes
- PSP 15 updates
- SMU 15 updates
- Sync fix in amdgpu_dma_buf_move_notify()
- HAINAN fix
- PSP 13.x fix
- GPUVM locking fix
- Fixes for DC analog support
- DC FAMS fixes
- DML 2.1 fixes
- eDP fixes
- Misc DC fixes
- Fastboot fix
- 3DLUT fixes
- GPUVM fixes
- 64bpp format fix
- Fix for MacBooks with switchable gfx
amdkfd:
- Fix possible double deletion of validate list
- Event setup fix
- Device disconnect regression fix
- APU GTT as VRAM fix
- Fix piority inversion with MQDs
- NULL check fix
radeon:
- HAINAN fix
i915/xe display:
- Regresion fix for HDR 4k displays (#15503)
- Fixup for Dell XPS 13 7390 eDP rate limit
- Memory leak fix on ACPI _DSM handling
- Add missing slice count check during DP mode validation
xe:
- drm/xe: Prevent VFs from exposing the CCS mode sysfs file
- SRIOV related fixes
- PAT cache fix
- MMIO read fix
- W/a fixes
- Adjust type of xe_modparam.force_vram_bar_size
- Wedge mode fix
- HWMon fix
* tag 'drm-next-2026-02-21' of https://gitlab.freedesktop.org/drm/kernel: (143 commits)
drm/amd/display: Remove unneeded DAC link encoder register
drm/amd/display: Enable DAC in DCE link encoder
drm/amd/display: Set CRTC source for DAC using registers
drm/amd/display: Initialize DAC in DCE link encoder using VBIOS
drm/amd/display: Turn off DAC in DCE link encoder using VBIOS
drm/amd/display: Don't call find_analog_engine() twice
drm/amdgpu: fix 4-level paging if GMC supports 57-bit VA v2
drm/amdgpu: keep vga memory on MacBooks with switchable graphics
drm/amdgpu: Set atomics to true for xgmi
drm/amdkfd: Check for NULL return values
drm/amd/display: Use same max plane scaling limits for all 64 bpp formats
drm/amdgpu: Set vmid0 PAGE_TABLE_DEPTH for GFX12.1
drm/amdkfd: Disable MQD queue priority
drm/amd/display: Remove conditional for shaper 3DLUT power-on
drm/amd/display: Check return of shaper curve to HW format
drm/amd/display: Correct logic check error for fastboot
drm/amd/display: Skip eDP detection when no sink
Revert "drm/amd/display: Add Gfx Base Case For Linear Tiling Handling"
Revert "drm/amd/display: Correct hubp GfxVersion verification"
Revert "drm/amd/display: Add Handling for gfxversion DcGfxBase"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix possible dereference of uninitialized pointer
When validating the persistent ring buffer on boot up, if the first
validation fails, a reference to "head_page" is performed in the
error path, but it skips over the initialization of that variable.
Move the initialization before the first validation check.
- Fix use of event length in validation of persistent ring buffer
On boot up, the persistent ring buffer is checked to see if it is
valid by several methods. One being to walk all the events in the
memory location to make sure they are all valid. The length of the
event is used to move to the next event. This length is determined by
the data in the buffer. If that length is corrupted, it could
possibly make the next event to check located at a bad memory
location.
Validate the length field of the event when doing the event walk.
- Fix function graph on archs that do not support use of ftrace_ops
When an architecture defines HAVE_DYNAMIC_FTRACE_WITH_ARGS, it means
that its function graph tracer uses the ftrace_ops of the function
tracer to call its callbacks. This allows a single registered
callback to be called directly instead of checking the callback's
meta data's hash entries against the function being traced.
For architectures that do not support this feature, it must always
call the loop function that tests each registered callback (even if
there's only one). The loop function tests each callback's meta data
against its hash of functions and will call its callback if the
function being traced is in its hash map.
The issue was that there was no check against this and the direct
function was being called even if the architecture didn't support it.
This meant that if function tracing was enabled at the same time as a
callback was registered with the function graph tracer, its callback
would be called for every function that the function tracer also
traced, even if the callback's meta data only wanted to be called
back for a small subset of functions.
Prevent the direct calling for those architectures that do not
support it.
- Fix references to trace_event_file for hist files
The hist files used event_file_data() to get a reference to the
associated trace_event_file the histogram was attached to. This would
return a pointer even if the trace_event_file is about to be freed
(via RCU). Instead it should use the event_file_file() helper that
returns NULL if the trace_event_file is marked to be freed so that no
new references are added to it.
- Wake up hist poll readers when an event is being freed
When polling on a hist file, the task is only awoken when a hist
trigger is triggered. This means that if an event is being freed
while there's a task waiting on its hist file, it will need to wait
until the hist trigger occurs to wake it up and allow the freeing to
happen. Note, the event will not be completely freed until all
references are removed, and a hist poller keeps a reference. But it
should still be woken when the event is being freed.
* tag 'trace-v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Wake up poll waiters for hist files when removing an event
tracing: Fix checking of freed trace_event_file for hist files
fgraph: Do not call handlers direct when not using ftrace_ops
tracing: ring-buffer: Fix to check event length before using
ring-buffer: Fix possible dereference of uninitialized pointer
|
|
ntbm_msi_free_irq() and ntb_msi_peer_addr() were both added in 2019's
commit 26b3a37b9284 ("NTB: Introduce MSI library")
but have remained unused.
Remove them, and the ntbm_msi_callback_match() helper that
was used by ntbm_msi_free_irq().
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- drm/xe: Prevent VFs from exposing the CCS mode sysfs file (Nareshkumar)
Cross-subsystem Changes:
- drm/pagemap: pass pagemap_addr by reference (Arnd)
Driver Changes:
- SRIOV related fixes (Michal, Piotr)
- PAT cache fix (Jia)
- MMIO read fix (Shuicheng)
- W/a fixes (Roper)
- Adjust type of xe_modparam.force_vram_bar_size (Shuicheng)
- Wedge mode fix (Raag)
- HWMon fix (Karthik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aZeR6CXDRbeudIVR@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Debugfs support for MSHV statistics (Nuno Das Neves)
- Support for the integrated scheduler (Stanislav Kinsburskii)
- Various fixes for MSHV memory management and hypervisor status
handling (Stanislav Kinsburskii)
- Expose more capabilities and flags for MSHV partition management
(Anatol Belski, Muminul Islam, Magnus Kulke)
- Miscellaneous fixes to improve code quality and stability (Carlos
López, Ethan Nelson-Moore, Li RongQing, Michael Kelley, Mukesh
Rathor, Purna Pavan Chandra Aekkaladevi, Stanislav Kinsburskii, Uros
Bizjak)
- PREEMPT_RT fixes for vmbus interrupts (Jan Kiszka)
* tag 'hyperv-next-signed-20260218' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (34 commits)
mshv: Handle insufficient root memory hypervisor statuses
mshv: Handle insufficient contiguous memory hypervisor status
mshv: Introduce hv_deposit_memory helper functions
mshv: Introduce hv_result_needs_memory() helper function
mshv: Add SMT_ENABLED_GUEST partition creation flag
mshv: Add nested virtualization creation flag
Drivers: hv: vmbus: Simplify allocation of vmbus_evt
mshv: expose the scrub partition hypercall
mshv: Add support for integrated scheduler
mshv: Use try_cmpxchg() instead of cmpxchg()
x86/hyperv: Fix error pointer dereference
x86/hyperv: Reserve 3 interrupt vectors used exclusively by MSHV
Drivers: hv: vmbus: Use kthread for vmbus interrupts on PREEMPT_RT
x86/hyperv: Remove ASM_CALL_CONSTRAINT with VMMCALL insn
x86/hyperv: Use savesegment() instead of inline asm() to save segment registers
mshv: fix SRCU protection in irqfd resampler ack handler
mshv: make field names descriptive in a header struct
x86/hyperv: Update comment in hyperv_cleanup()
mshv: clear eventfd counter on irqfd shutdown
x86/hyperv: Use memremap()/memunmap() instead of ioremap_cache()/iounmap()
...
|
|
The refactoring in commit 30984ccf31b7 ("rv: Refactor da_monitor to
minimise macros") replaced per-monitor unique variable names
(da_mon_##name) with a fixed name (da_mon_this).
While this works for 'static' variables (each translation unit gets its
own copy), DEFINE_PER_CPU internally generates a non-static dummy
variable __pcpu_unique_<n> for each per-cpu definition. The requirement
for this variable to be unique although static exists for modules on
specific architectures (alpha) and if the kernel is built with
CONFIG_DEBUG_FORCE_WEAK_PER_CPU (e.g. Fedora's debug kernel).
When multiple per-cpu monitors (e.g. sco and sts) are built-in
simultaneously, they all produce the same __pcpu_unique_da_mon_this
symbol, causing a link error:
ld: kernel/trace/rv/monitors/sts/sts.o: multiple definition of
`__pcpu_unique_da_mon_this';
kernel/trace/rv/monitors/sco/sco.o: first defined here
Fix this by introducing a DA_MON_NAME macro that expands to a
per-monitor unique name (da_mon_<MONITOR_NAME>) via the existing
CONCATENATE helper. This restores the uniqueness that was present
before the refactoring.
Fixes: 30984ccf31b7 ("rv: Refactor da_monitor to minimise macros")
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://lore.kernel.org/r/20260216172707.1441516-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot+937b5bbb6a815b3e5d0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69949275.050a0220.2eeac1.0145.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260217161205.2079883-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
|
|
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9cd1 ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For SQE128, sqe->cmd provides 80 bytes for uring_cmd. Add macro to
check if size of user struct does not exceed 80 bytes at compile time.
User doesn't have to track this manually during development.
Replace io_uring_sqe_cmd() inline func with macro and add
io_uring_sqe128_cmd() which checks struct
size for 16 bytes cmd and 80 bytes cmd respectively.
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Remove this helper now that all users have been converted to
fserror_report_metadata as of 7.0-rc1.
Cc: jack@suse.cz
Cc: amir73il@gmail.com
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/177148129543.716249.980530449513340111.stgit@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When creating guest partition objects, the hypervisor may fail to
allocate root partition pages and return an insufficient memory status.
In this case, deposit memory using the root partition ID instead.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The HV_STATUS_INSUFFICIENT_CONTIGUOUS_MEMORY status indicates that the
hypervisor lacks sufficient contiguous memory for its internal allocations.
When this status is encountered, allocate and deposit
HV_MAX_CONTIGUOUS_ALLOCATION_PAGES contiguous pages to the hypervisor.
HV_MAX_CONTIGUOUS_ALLOCATION_PAGES is defined in the hypervisor headers, a
deposit of this size will always satisfy the hypervisor's requirements.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduce hv_deposit_memory_node() and hv_deposit_memory() helper
functions to handle memory deposit with proper error handling.
The new hv_deposit_memory_node() function takes the hypervisor status
as a parameter and validates it before depositing pages. It checks for
HV_STATUS_INSUFFICIENT_MEMORY specifically and returns an error for
unexpected status codes.
This is a precursor patch to new out-of-memory error codes support.
No functional changes intended.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Replace direct comparisons of hv_result(status) against
HV_STATUS_INSUFFICIENT_MEMORY with a new hv_result_needs_memory() helper
function.
This improves code readability and provides a consistent and extendable
interface for checking out-of-memory conditions in hypercall results.
No functional changes intended.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter: updates for net
The following patchset contains Netfilter fixes for *net*:
1) Add missing __rcu annotations to NAT helper hook pointers in Amanda,
FTP, IRC, SNMP and TFTP helpers. From Sun Jian.
2-4):
- Add global spinlock to serialize nft_counter fetch+reset operations.
- Use atomic64_xchg() for nft_quota reset instead of read+subtract pattern.
Note AI review detects a race in this change but it isn't new. The
'racing' bit only exists to prevent constant stream of 'quota expired'
notifications.
- Revert commit_mutex usage in nf_tables reset path, it caused
circular lock dependency. All from Brian Witte.
5) Fix uninitialized l3num value in nf_conntrack_h323 helper.
6) Fix musl libc compatibility in netfilter_bridge.h UAPI header. This
change isn't nice (UAPI headers should not include libc headers), but
as-is musl builds may fail due to redefinition of struct ethhdr.
7) Fix protocol checksum validation in IPVS for IPv6 with extension headers,
from Julian Anastasov.
8) Fix device reference leak in IPVS when netdev goes down. Also from
Julian.
9) Remove WARN_ON_ONCE when accessing forward path array, this can
trigger with sufficiently long forward paths. From Pablo Neira Ayuso.
10) Fix use-after-free in nf_tables_addchain() error path, from Inseo An.
* tag 'nf-26-02-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix use-after-free in nf_tables_addchain()
net: remove WARN_ON_ONCE when accessing forward path array
ipvs: do not keep dest_dst if dev is going down
ipvs: skip ipv6 extension headers for csum checks
include: uapi: netfilter_bridge.h: Cover for musl libc
netfilter: nf_conntrack_h323: don't pass uninitialised l3num value
netfilter: nf_tables: revert commit_mutex usage in reset path
netfilter: nft_quota: use atomic64_xchg for reset
netfilter: nft_counter: serialize reset with spinlock
netfilter: annotate NAT helper hook pointers with __rcu
====================
Link: https://patch.msgid.link/20260217163233.31455-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
icmp_global_credit was meant to be changed ~1000 times per second,
but if an admin sets net.ipv4.icmp_msgs_per_sec to a very high value,
icmp_global_credit changes can inflict false sharing to surrounding
fields that are read mostly.
Move icmp_global_credit and icmp_global_stamp to a separate
cacheline aligned group.
Fixes: b056b4cd9178 ("icmp: move icmp_global.credit and icmp_global.stamp to per netns storage")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260216142832.3834174-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for HV_PARTITION_CREATION_FLAG_SMT_ENABLED_GUEST
to allow userspace VMMs to enable SMT for guest partitions.
Expose this via new MSHV_PT_BIT_SMT_ENABLED_GUEST flag in the UAPI.
Without this flag, the hypervisor schedules guest VPs incorrectly,
causing SMT unusable.
Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Introduce HV_PARTITION_CREATION_FLAG_NESTED_VIRTUALIZATION_CAPABLE to
indicate support for nested virtualization during partition creation.
This enables clearer configuration and capability checks for nested
virtualization scenarios.
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
This hypercall needs to be exposed for VMMs to soft-reboot guests. It
will reset APIC and synthetic interrupt controller state, among others.
Signed-off-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Query the hypervisor for integrated scheduler support and use it if
configured.
Microsoft Hypervisor originally provided two schedulers: root and core. The
root scheduler allows the root partition to schedule guest vCPUs across
physical cores, supporting both time slicing and CPU affinity (e.g., via
cgroups). In contrast, the core scheduler delegates vCPU-to-physical-core
scheduling entirely to the hypervisor.
Direct virtualization introduces a new privileged guest partition type - L1
Virtual Host (L1VH) — which can create child partitions from its own
resources. These child partitions are effectively siblings, scheduled by
the hypervisor's core scheduler. This prevents the L1VH parent from setting
affinity or time slicing for its own processes or guest VPs. While cgroups,
CFS, and cpuset controllers can still be used, their effectiveness is
unpredictable, as the core scheduler swaps vCPUs according to its own logic
(typically round-robin across all allocated physical CPUs). As a result,
the system may appear to "steal" time from the L1VH and its children.
To address this, Microsoft Hypervisor introduces the integrated scheduler.
This allows an L1VH partition to schedule its own vCPUs and those of its
guests across its "physical" cores, effectively emulating root scheduler
behavior within the L1VH, while retaining core scheduler behavior for the
rest of the system.
The integrated scheduler is controlled by the root partition and gated by
the vmm_enable_integrated_scheduler capability bit. If set, the hypervisor
supports the integrated scheduler. The L1VH partition must then check if it
is enabled by querying the corresponding extended partition property. If
this property is true, the L1VH partition must use the root scheduler
logic; otherwise, it must use the core scheduler. This requirement makes
reading VMM capabilities in L1VH partition a requirement too.
Signed-off-by: Andreea Pintilie <anpintil@microsoft.com>
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the power management updates merged
recently in cpuidle governors, in the Intel RAPL power capping driver
and in the wake IRQ management code:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add
all package CPUs to the PMU cpumask to allow tools to read RAPL
events from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power
capping driver to account for the fact that on partitioned systems,
multiple TPMI instances may exist per package, but RAPL registers
are only valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass
the governor in those cases and adjust the other existing governors
to that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)"
* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
PM: sleep: wakeirq: Update outdated documentation comments
Documentation: PM: Document intel_idle.table command line option
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
|
