| Age | Commit message (Collapse) | Author |
|
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X24_CPADHI supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-3-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Add the BGR666 format MEDIA_BUS_FMT_BGR666_1X18 supported by the
RaspberryPi.
Signed-off-by: Joerg Quinten <aBUGSworstnightmare@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-2-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Add the MEDIA_BUS_FMT_RGB565_1X24_CPADHI format used by the Geekworm
MZP280 panel for the Raspberry Pi.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20221013-rpi-dpi-improvements-v3-1-eb76e26a772d@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The file uses bool and struct completion, include the relevant headers.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123130932.3863985-1-jani.nikula@intel.com
|
|
The drm_atomic_get_(old|new)_*_state don't modify the passed
drm_atomic_state, so we can make it const.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123-rpi-kunit-tests-v1-9-051a0bb60a16@cerno.tech
|
|
The analog TV connector drivers share some atomic_check logic, and the new
TV standard property have created some boilerplate that can be shared
across drivers too.
Let's create an atomic_check helper for those use cases.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-14-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The drm_tv_create_properties() function will create a bunch of properties,
but it's up to each and every driver using that function to properly reset
the state of these properties leading to inconsistent behaviours.
Let's create a helper that will take care of it.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-13-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Most of the TV connectors will need a similar get_modes implementation
that will, depending on the drivers' capabilities, register the 480i and
576i modes.
That implementation will also need to set the preferred flag and order
the modes based on the driver and users preferrence.
This is especially important to guarantee that a userspace stack such as
Xorg can start and pick up the preferred mode while maintaining a
working output.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-12-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Our new tv mode option allows to specify the TV mode from a property.
However, it can still be useful, for example to avoid any boot time
artifact, to set that property directly from the kernel command line.
Let's add some code to allow it, and some unit tests to exercise that code.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-8-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
As part of the command line parsing rework coming in the next patches,
we'll need to lookup drm_connector_tv_mode values by their name, already
defined in drm_tv_mode_enum_list.
In order to avoid any code duplication, let's do a function that will
perform a lookup of a TV mode name and return its value.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-7-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Multiple drivers (meson, vc4, sun4i) define analog TV 525-lines and
625-lines modes in their drivers.
Since those modes are fairly standard, and that we'll need to use them
in more places in the future, it makes sense to move their definition
into the core framework.
However, analog display usually have fairly loose timings requirements,
the only discrete parameters being the total number of lines and pixel
clock frequency. Thus, we created a function that will create a display
mode from the standard, the pixel frequency and the active area.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-6-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The TV mode property has been around for a while now to select and get the
current TV mode output on an analog TV connector.
Despite that property name being generic, its content isn't and has been
driver-specific which makes it hard to build any generic behaviour on top
of it, both in kernel and user-space.
Let's create a new enum tv norm property, that can contain any of the
analog TV standards currently supported by kernel drivers. Each driver can
then pass in a bitmask of the modes it supports, and the property
creation function will filter out the modes not supported.
We'll then be able to phase out the older tv mode property.
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-5-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
drm_mode_create_tv_properties(), among other things, will create the
"mode" property that stores the analog TV mode that connector is
supposed to output.
However, that property is getting deprecated, so let's rename that
function to mention it's deprecated. We'll introduce a new variant of
that function creating the property superseeding it in a later patch.
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-4-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The current tv_mode has driver-specific values that don't allow to
easily share code using it, either at the userspace or kernel level.
Since we're going to introduce a new, generic, property that fit the
same purpose, let's rename this one to legacy_tv_mode to make it
obvious we should move away from it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Lyude Paul <lyude@redhat.com> # nouveau
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-in-principle-or-something-like-that-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v10-2-256dad125326@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
I've been collecting these typo fixes for a while and it feels like
time to send them in.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221123193519.3948105-1-tjmercier@google.com
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
Backmerging to get v6.1-rc6 into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Linux 6.1-rc6
This is needed for drm-misc-next and tegra.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.2-2022-11-18:
amdgpu:
- SR-IOV fixes
- Clean up DC checks
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- Don't enable degamma on asics which don't support it
- IP discovery fixes
- BACO fixes
- Fix vbios allocation handling when vkms is enabled
- Drop buggy tdr advanced mode GPU reset handling
- Fix the build when DCN is not set in kconfig
- MST DSC fixes
- Userptr fixes
- FRU and RAS EEPROM fixes
- VCN 4.x RAS support
- Aldrebaran CU occupancy reporting fix
- PSP ring cleanup
amdkfd:
- Memory limit fix
- Enable cooperative launch on gfx 10.3
amd-drm-next-6.2-2022-11-11:
amdgpu:
- SMU 13.x updates
- GPUVM TLB race fix
- DCN 3.1.4 updates
- DCN 3.2.x updates
- PSR fixes
- Kerneldoc fix
- Vega10 fan fix
- GPUVM locking fixes in error pathes
- BACO fix for Beige Goby
- EEPROM I2C address cleanup
- GFXOFF fix
- Fix DC memory leak in error pathes
- Flexible array updates
- Mtype fix for GPUVM PTEs
- Move Kconfig into amdgpu directory
- SR-IOV updates
- Fix possible memory leak in CS IOCTL error path
amdkfd:
- Fix possible memory overrun
- CRIU fixes
radeon:
- ACPI ref count fix
- HDA audio notifier support
- Move Kconfig into radeon directory
UAPI:
- Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI.
These are used internally in the driver to align location based memory coherency
requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They
are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now.
They are just used internally in the kernel driver for now for existing KFD memory
allocations. So a change to the UAPI header, but no functional change in the UAPI.
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
- fbdev: Add support for the nomodeset kernel parameter
Core Changes:
- client: Add kunit tests for drm_connector_pick_cmdline_mode()
- dma-buf: Move dma_buf_mmap_internal() to new locking specification
- edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a
temporary device to load the EDID through the firmware mechanism
- fb-helper: Remove damage worker
- gem-vram: Fix deadlock in drm_gem_vram_vmap()
- modes: Named mode parsing improvements
- tests: Add Kunit helpers to create a DRM device
Driver Changes:
- hisilicon: convert to drm_mode_init()
- malidp: Use drm-managed resources
- msm: convert to drm_mode_init() and drm_mode_copy()
- mtk: convert to drm_mode_init()
- nouveau: Support backlight control for nva3
- rockchip: convert to drm_mode_copy()
- sti: convert to drm_mode_copy()
- v3d: Switch to drm-managed resources
- vc4: Fix potential NULL pointer dereference
- panels:
- New panel: NewVision NV3051D
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
|
|
when goto err_free, the object had init, so it should be release when fail.
Signed-off-by: ChunyouTang <tangchunyou@163.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221119064131.364-1-tangchunyou@163.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
|
|
framebuffer"
This reverts commit 7f5cc4a3e5e4c5a38e5748defc952e45278f7a70.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-3-tzimmermann@suse.de
|
|
This reverts commit 27c3e9452d552ea86369a94f23287a9675f2d7a1.
Needed to restore the fbdev damage worker. There have been bug reports
about locking order [1] and incorrectly takens branches. [2] Restore
the damage worker until these problems have been resovled.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://intel-gfx-ci.01.org/tree/drm-tip/fi-kbl-8809g.html # 1
Link: https://lore.kernel.org/dri-devel/20221115115819.23088-6-tzimmermann@suse.de/T/#m06eedc0a468940e4cbbd14ca026733b639bc445a # 2
Link: https://patchwork.freedesktop.org/patch/msgid/20221118133535.9739-2-tzimmermann@suse.de
|
|
Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
tweaks for the multishot handling for accept and receive.
All stable material"
* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
io_uring: disallow self-propelled ring polling
io_uring: fix multishot recv request leaks
io_uring: fix multishot accept request leaks
io_uring: fix tw losing poll events
io_uring: update res mask in io_poll_check_events
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1"
* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
ASoC: stm32: dfsdm: manage cb buffers cleanup
ASoC: sof_es8336: reduce pop noise on speaker
ASoC: SOF: topology: No need to assign core ID if token parsing failed
ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
ASoC: rt5677: fix legacy dai naming
ASoC: rt5514: fix legacy dai naming
ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
ASoC: tas2780: Fix set_tdm_slot in case of single slot
ASoC: tas2764: Fix set_tdm_slot in case of single slot
ASoC: tas2770: Fix set_tdm_slot in case of single slot
ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
ASoC: core: Fix use-after-free in snd_soc_exit()
MAINTAINERS: update Tzung-Bi's email address
ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of devicetree and code changes for SoC platforms, notably:
- DT schema warning fixes for i.MX
- Functional fixes for i.MX tqma8mqml-mba8mx USB and i.MX8M OCOTP
- MAINTAINERS updates for Hisilicon and RISC-V, documenting which
RISC-V SoC specific patches will now get merged through the SoC
tree in the future.
- A code fix for at91 suspend, to work around broken hardware
- A devicetree fix for lan966x/pcb8291 LED support
- Lots of DT fixes for Qualcomm SoCs, mostly fixing minor problems
like incorrect register sizes and schema warnings. One fix makes
the UFS controller work on sc8280xp, and six fixes address the same
regulator problem in a variety of platforms"
* tag 'soc-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
MAINTAINERS: repair Microchip corei2c driver entry
MAINTAINERS: add an entry for StarFive devicetrees
MAINTAINERS: generify the Microchip RISC-V entry name
MAINTAINERS: add entries for misc. RISC-V SoC drivers and devicetrees
MAINTAINERS: git://github.com -> https://github.com for HiSilicon
soc: imx8m: Enable OCOTP clock before reading the register
arm64: dts: imx93-pinfunc: drop execution permission
arm64: dts: imx8mn: Fix NAND controller size-cells
arm64: dts: imx8mm: Fix NAND controller size-cells
ARM: dts: imx7: Fix NAND controller size-cells
arm64: dts: imx8mm-tqma8mqml-mba8mx: Fix USB DR
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
ARM: dts: at91: sama7g5: fix signal name of pin PB2
arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
...
|
|
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues.
Cc: stable@vger.kernel.org
Fixes: 390ed29b5e425 ("io_uring: add IORING_ACCEPT_MULTISHOT for accept")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7700ac57653f2823e30b34dc74da68678c0c5f13.1668710222.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Current release - regressions:
- tls: fix memory leak in tls_enc_skb() and tls_sw_fallback_init()
Previous releases - regressions:
- bridge: fix memory leaks when changing VLAN protocol
- dsa: make dsa_master_ioctl() see through port_hwtstamp_get() shims
- dsa: don't leak tagger-owned storage on switch driver unbind
- eth: mlxsw: avoid warnings when not offloaded FDB entry with IPv6
is removed
- eth: stmmac: ensure tx function is not running in
stmmac_xdp_release()
- eth: hns3: fix return value check bug of rx copybreak
Previous releases - always broken:
- kcm: close race conditions on sk_receive_queue
- bpf: fix alignment problem in bpf_prog_test_run_skb()
- bpf: fix writing offset in case of fault in
strncpy_from_kernel_nofault
- eth: macvlan: use built-in RCU list checking
- eth: marvell: add sleep time after enabling the loopback bit
- eth: octeon_ep: fix potential memory leak in octep_device_setup()
Misc:
- tcp: configurable source port perturb table size
- bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)"
* tag 'net-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits)
net: use struct_group to copy ip/ipv6 header addresses
net: usb: smsc95xx: fix external PHY reset
net: usb: qmi_wwan: add Telit 0x103a composition
netdevsim: Fix memory leak of nsim_dev->fa_cookie
tcp: configurable source port perturb table size
l2tp: Serialize access to sk_user_data with sk_callback_lock
net: thunderbolt: Fix error handling in tbnet_init()
net: microchip: sparx5: Fix potential null-ptr-deref in sparx_stats_init() and sparx5_start()
net: lan966x: Fix potential null-ptr-deref in lan966x_stats_init()
net: dsa: don't leak tagger-owned storage on switch driver unbind
net/x25: Fix skb leak in x25_lapb_receive_frame()
net: ag71xx: call phylink_disconnect_phy if ag71xx_hw_enable() fail in ag71xx_open()
bridge: switchdev: Fix memory leaks when changing VLAN protocol
net: hns3: fix setting incorrect phy link ksettings for firmware in resetting process
net: hns3: fix return value check bug of rx copybreak
net: hns3: fix incorrect hw rss hash type of rx packet
net: phy: marvell: add sleep time after enabling the loopback bit
net: ena: Fix error handling in ena_init()
kcm: close race conditions on sk_receive_queue
net: ionic: Fix error handling in ionic_init_module()
...
|
|
Make fb_modesetting_disabled() a static-inline function when it is
defined in the header file. Avoid the linker error shown below.
ld: drivers/video/fbdev/core/fbmon.o: in function `fb_modesetting_disabled':
fbmon.c:(.text+0x1e4): multiple definition of `fb_modesetting_disabled'; drivers/video/fbdev/core/fbmem.o:fbmem.c:(.text+0x1bac): first defined here
A bug report is at [1].
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 0ba2fa8cbd29 ("fbdev: Add support for the nomodeset kernel parameter")
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/dri-devel/20221117183214.2473e745@canb.auug.org.au/T/#u # 1
Link: https://patchwork.freedesktop.org/patch/msgid/20221117114729.7570-1-tzimmermann@suse.de
|
|
kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:
from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f8324188fa ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Move the declaration of 'struct trace_array' out of #ifdef
CONFIG_TRACING block, to fix the following warning when CONFIG_TRACING
is not set:
>> include/linux/trace.h:63:45: warning: 'struct trace_array' declared
inside parameter list will not be visible outside of this definition or
declaration
Link: https://lkml.kernel.org/r/20221107160556.2139463-1-shraash@google.com
Fixes: 1a77dd1c2bb5 ("scsi: tracing: Fix compile error in trace_array calls when TRACING is disabled")
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Arun Easi <aeasi@marvell.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There are no external users of this function.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Device mappers had always been getting the default 511 dma mask, but
the underlying device might have a larger alignment requirement. Since
this value is used to determine alloweable direct-io alignment, this
needs to be a stackable limit.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221110184501.2451620-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the way polling works on the ring buffer is broken. It will
return immediately if there's any data in the ring buffer whereas a read
will block until the watermark (defined by the tracefs buffer_percent file)
is hit.
That is, a select() or poll() will return as if there's data available,
but then the following read will block. This is broken for the way
select()s and poll()s are supposed to work.
Have the polling on the ring buffer also block the same way reads and
splice does on the ring buffer.
Link: https://lkml.kernel.org/r/20221020231427.41be3f26@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Primiano Tucci <primiano@google.com>
Cc: stable@vger.kernel.org
Fixes: 1e0d6714aceb7 ("ring-buffer: Do not wake up a splice waiter when page is not full")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
sk->sk_user_data has multiple users, which are not compatible with each
other. Writers must synchronize by grabbing the sk->sk_callback_lock.
l2tp currently fails to grab the lock when modifying the underlying tunnel
socket fields. Fix it by adding appropriate locking.
We err on the side of safety and grab the sk_callback_lock also inside the
sk_destruct callback overridden by l2tp, even though there should be no
refs allowing access to the sock at the time when sk_destruct gets called.
v4:
- serialize write to sk_user_data in l2tp sk_destruct
v3:
- switch from sock lock to sk_callback_lock
- document write-protection for sk_user_data
v2:
- update Fixes to point to origin of the bug
- use real names in Reported/Tested-by tags
Cc: Tom Parkin <tparkin@katalix.com>
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Reported-by: Haowei Yan <g1042620637@gmail.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Support the kernel's nomodeset parameter for all PCI-based fbdev
drivers that use aperture helpers to remove other, hardware-agnostic
graphics drivers.
The parameter is a simple way of using the firmware-provided scanout
buffer if the hardware's native driver is broken. The same effect
could be achieved with per-driver options, but the importance of the
graphics output for many users makes a single, unified approach
worthwhile.
With nomodeset specified, the fbdev driver module will not load. This
unifies behavior with similar DRM drivers. In DRM helpers, modules
first check the nomodeset parameter before registering the PCI
driver. As fbdev has no such module helpers, we have to modify each
driver individually.
The name 'nomodeset' is slightly misleading, but has been chosen for
historical reasons. Several drivers implemented it before it became a
general option for DRM. So keeping the existing name was preferred over
introducing a new one.
v2:
* print a warning if a driver does not init (Helge)
* wrap video_firmware_drivers_only() in helper
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-3-tzimmermann@suse.de
|
|
Move the nomodeset kernel parameter to drivers/video to make it
available to non-DRM drivers. Adapt the interface, but keep the DRM
interface drm_firmware_drivers_only() to avoid churn within DRM. The
function should later be inlined into callers.
The parameter disables any DRM graphics driver that would replace a
driver for firmware-provided scanout buffers. It is an option to easily
fallback to basic graphics output if the hardware's native driver is
broken. Moving it to a more prominent location wil make it available
to fbdev as well.
v2:
* clarify the meaning of the nomodeset parameter (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221111133024.9897-2-tzimmermann@suse.de
|
|
The fbdev damage worker is unused, so remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-7-tzimmermann@suse.de
|
|
Schedule the deferred-I/O worker instead of the damage worker after
writing to the fbdev framebuffer. The deferred-I/O worker then performs
the dirty-fb update. The fbdev emulation will initialize deferred I/O
for all drivers that require damage updates. It is therefore a valid
assumption that the deferred-I/O worker is present.
It would be possible to perform the damage handling directly from within
the write operation. But doing this could increase the overhead of the
write or interfere with a concurrently scheduled deferred-I/O worker.
Instead, scheduling the deferred-I/O worker with its regular delay of
50 ms removes load off the write operation and allows the deferred-I/O
worker to handle multiple write operations that arrived during the delay
time window.
v3:
* remove unused variable (lkp)
v2:
* keep drm_fb_helper_damage() (Daniel)
* use fb_deferred_io_schedule_flush() (Daniel)
* clarify comments (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221115115819.23088-6-tzimmermann@suse.de
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.2:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- atomic-helper: Add begin_fb_access and end_fb_access hooks
- fb-helper: Rework to move fb emulation into helpers
- scheduler: rework entity flush, kill and fini
- ttm: Optimize pool allocations
Driver Changes:
- amdgpu: scheduler rework
- hdlcd: Switch to DRM-managed resources
- ingenic: Fix registration error path
- lcdif: FIFO threshold tuning
- meson: Fix return type of cvbs' mode_valid
- ofdrm: multiple fixes (kconfig, types, endianness)
- sun4i: A100 and D1 support
- panel:
- New Panel: Jadard JD9365DA-H3
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110083612.g63eaocoaa554soh@houat
|
|
This reverts commit e6c6338f393b74ac0b303d567bb918b44ae7ad75.
This feature basically re-submits one job after another to
figure out which one was the one causing a hang.
This is obviously incompatible with gang-submit which requires
that multiple jobs run at the same time. It's also absolutely
not helpful to crash the hardware multiple times if a clean
recovery is desired.
For testing and debugging environments we should rather disable
recovery alltogether to be able to inspect the state with a hw
debugger.
Additional to that the sw implementation is clearly buggy and causes
reference count issues for the hardware fence.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We'll need to get the pixel clock to generate proper display modes for
all the current named modes. Let's add it to struct drm_cmdline_mode and
fill it when parsing the named mode.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Tested-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Link: https://lore.kernel.org/r/20220728-rpi-analog-tv-properties-v9-12-24b168e5bcd5@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Pull VFIO fixes from Alex Williamson:
- Fixes for potential container registration leak for drivers not
implementing a close callback, duplicate container de-registrations,
and a regression in support for bus reset on last device close from
a device set (Anthony DeRossi)
* tag 'vfio-v6.1-rc6' of https://github.com/awilliam/linux-vfio:
vfio/pci: Check the device set open count on reset
vfio: Export the device set open count
vfio: Fix container device registration life cycle
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
AT91 fixes for 6.1
It contains:
- signal name fix for a pin on SAMA7G5
- memory self-refresh fix for SAMA7G5 by avoid soft resetting AC
DLL which can introduce glitches in RAM controller and lead to
unexpected behavior
- led support fix for lan966x-pcb8291 board by enabling sgpio node
* tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
ARM: dts: at91: sama7g5: fix signal name of pin PB2
Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
A relatively large collection of fixes and new platform quirks here,
they're all fairly minor though - the widest possible impact is the fix
to the use of prefixes on regulator names which would have broken any
device that integrates regulators with DAPM and was used in a system
where it had a name prefix assigning to it.
|
|
Andrii Nakryiko says:
====================
bpf 2022-11-11
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 11 files changed, 83 insertions(+), 74 deletions(-).
The main changes are:
1) Fix strncpy_from_kernel_nofault() to prevent out-of-bounds writes,
from Alban Crequy.
2) Fix for bpf_prog_test_run_skb() to prevent wrong alignment,
from Baisong Zhong.
3) Switch BPF_DISPATCHER to static_call() instead of ftrace infra, with
a small build fix on top, from Peter Zijlstra and Nathan Chancellor.
4) Fix memory leak in BPF verifier in some error cases, from Wang Yufen.
5) 32-bit compilation error fixes for BPF selftests, from Pu Lehui and
Yang Jihong.
6) Ensure even distribution of per-CPU free list elements, from Xu Kuohai.
7) Fix copy_map_value() to track special zeroed out areas properly,
from Xu Kuohai.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix offset calculation error in __copy_map_value and zero_map_value
bpf: Initialize same number of free nodes for each pcpu_freelist
selftests: bpf: Add a test when bpf_probe_read_kernel_str() returns EFAULT
maccess: Fix writing offset in case of fault in strncpy_from_kernel_nofault()
selftests/bpf: Fix test_progs compilation failure in 32-bit arch
selftests/bpf: Fix casting error when cross-compiling test_verifier for 32-bit platforms
bpf: Fix memory leaks in __check_func_call
bpf: Add explicit cast to 'void *' for __BPF_DISPATCHER_UPDATE()
bpf: Convert BPF_DISPATCHER to use static_call() (not ftrace)
bpf: Revert ("Fix dispatcher patchable function entry to 5 bytes nop")
bpf, test_run: Fix alignment problem in bpf_prog_test_run_skb()
====================
Link: https://lore.kernel.org/r/20221111231624.938829-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
|
|
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
|