| Age | Commit message (Collapse) | Author |
|---|
|
In SJA1105, RX timestamps for packets sent to the CPU are transmitted in
separate follow-up packets (metadata frames). These contain partial
timestamps (24 or 32 bits) which are kept in SJA1105_SKB_CB(skb)->meta_tstamp.
Thankfully, SJA1110 improved that, and the RX timestamps are now
transmitted in-band with the actual packet, in the timestamp trailer.
The RX timestamps are now full-width 64 bits.
Because we process the RX DSA tags in the rcv() method in the tagger,
but we would like to preserve the DSA code structure in that we populate
the skb timestamp in the port_rxtstamp() call which only happens later,
the implication is that we must somehow pass the 64-bit timestamp from
the rcv() method all the way to port_rxtstamp(). We can use the skb->cb
for that.
Rename the meta_tstamp from struct sja1105_skb_cb from "meta_tstamp" to
"tstamp", and increase its size to 64 bits.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The added value of this function is that it can deal with both the case
where the VLAN header is in the skb head, as well as in the offload field.
This is something I was not able to do using other functions in the
network stack.
Since both ocelot-8021q and sja1105 need to do the same stuff, let's
make it a common service provided by tag_8021q.
This is done as refactoring for the new SJA1110 tagger, which partly
uses tag_8021q as well (just like SJA1105), and will be the third caller.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All users of tag_8021q select it in Kconfig, so shim functions are not
needed because it is not possible for it to be disabled and its callers
enabled.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some really really weird switches just couldn't decide whether to use a
normal or a tail tagger, so they just did both.
This creates problems for DSA, because we only have the concept of an
'overhead' which can be applied to the headroom or to the tailroom of
the skb (like for example during the central TX reallocation procedure),
depending on the value of bool tail_tag, but not to both.
We need to generalize DSA to cater for these odd switches by
transforming the 'overhead / tail_tag' pair into 'needed_headroom /
needed_tailroom'.
The DSA master's MTU is increased to account for both.
The flow dissector code is modified such that it only calls the DSA
adjustment callback if the tagger has a non-zero header length.
Taggers are trivially modified to declare either needed_headroom or
needed_tailroom, based on the tail_tag value that they currently
declare.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2021-06-09
Introduce steering header insert/remove and switchdev bridge offloads
1) From Yevgeny, Steering header insert/remove support
ConnectX supports offloading of various encapsulations and decapsulations
(e.g. VXLAN), which are performed by 'Packet Reformat' action.
Starting with ConnectX-6 DX, a new reformat type is supported - INSERT_HEADER.
This reformat allows inserting an arbitrary size buffer at a selected location
in the packet on RX flows.
The insert/remove header support are needed as a prerequisite for the
bridge offloads vlan pop/push supprt, see below.
2) From Vlad, Support for bridge offloads for switchdev mode
This change implements bridge offloads with VLAN-support that works on top
of mlx5 representors in switchdev mode.
HIGH-LEVEL OVERVIEW
Hardware supported by mlx5 driver doesn't provide dynamic learning or aging
functionality and requires the driver to emulate all switch-like behavior
in software. As such, all packets by default go through miss path, appear
on representor and get to software bridge, if it is the upper device of the
representor. This causes bridge to process packet in software, learn the
MAC address to FDB and send SWITCHDEV_FDB_ADD_TO_DEVICE event to all
subscribers. Upon reception of SWITCHDEV_FDB_ADD_TO_DEVICE notification
mlx5 bridge offloads the FDB to hardware and sends back
SWITCHDEV_FDB_ADD_TO_BRIDGE notification to prevent such entries from being
aged out by kernel bridge. Leaving aging to kernel bridge would result
deletion of offloaded dynamic FDB entries every aging_time period due to
packets being processed by hardware and, consecutively, 'used' timestamp
for FDB entry not being updated. Hardware aging is emulated in driver by
running periodic workqueue task that manually updates the rules according
to their hardware counter:
- If hardware counter has changed since last update, the handler updates
'used' timestamp in kernel bridge dynamic entry by sending
SWITCHDEV_FDB_ADD_TO_BRIDGE notification for the entry.
- If FDB entry wasn't updated for user-controllable aging_time period,
then the FDB entry is unoffloaded from hardware and corresponding
SWITCHDEV_FDB_DEL_TO_BRIDGE notification is sent to kernel bridge.
The mlx5 bridge offload implementation fully supports port VLAN objects,
including PVID (vlan push) and "Egress Untagged" (vlan pop).
SOFTWARE ARCHITECTURE
Mlx5_eswitch is extended with pointer to new mlx5_esw_bridge_offloads
structure which has a linked list of mlx5_esw_bridge objects. Struct
mlx5_esw_bridge is the main switch object in mlx5 that holds all data for
offloaded FDB entries and metadata for bridge ports and their vlans. The
mlx5_esw_bridge object is created when first representor of eswitch vport
is added to bridge and deleted when the last representor is detached from
it. Bridge FDB entries are saved in linked list (to iterate over all FDB
entries in aging workqueue task) and also in hashtable for quick lookup by
MAC+VLAN tuple. Bridge FDB entries are saved in linked list (to iterate
over all FDB entries in aging workqueue task) and in hashtable for quick
lookup by MAC+VLAN tuple. Port metadata is stored in struct
mlx5_esw_bridge_port that is saved in xarray to allow quick lookup by vport
number. Part of the port metadata is the set of port vlans that are
represented by mlx5_esw_bridge_vlan structure. The vlan structure points to
all FDBs on vlan/port via fdb_list linked list.
Simplified diagram of mlx5 bridge objects:
+------------------+
| mxl5_eswitch |
| |
| br_offloads |
+--------+---------+
|
+--------v-------------------+
| mlx5_esw_bridge_offloads |
| |
+--> bridges |
| +-------+--------------------+
| |
| |
| +---v---------------+
| | mlx5_esw_bridge |
| | |
| | vports |
| | |
| | fdb_ht |
| +---+---------------+
| |
| +---v---------------+
+------+ mlx5_esw_bridge |
| |
+-------------------------+ vports |
| | |
| | fdb_ht +------------------------------------------+
| +-------------------+ |
| |
| |
| +----------------------+ +---------------------------+ |
+-> mlx5_esw_bridge_port | +--> mlx5_esw_bridge_fdb_entry <-+
| | | +----------------------+ | +--+------------------------+ |
| | vlans +--+-> mlx5_esw_bridge_vlan | | | |
| | | | | | | +--v------------------------+ |
| +----------------------+ | | fdb_list +--+ | mlx5_esw_bridge_fdb_entry <-+
| | +-------^--------------+ +--+------------------------+ |
| +----------------------+ | | | |
+-> mlx5_esw_bridge_port | | +-----------------------+ |
| | | |
| vlans | | -----------------------+ |
| | +-> mlx5_esw_bridge_vlan | |
+----------------------+ | | +---------------------------+ |
| fdb_list +-----> mlx5_esw_bridge_fdb_entry <-+
+-------^--------------+ +--+------------------------+
| |
+-----------------------+
HARDWARE REPRESENTATION
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. However, since netfilter offload in mlx5 is
implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads new FDB_TC_MISS priority is created between FDB_FT_OFFLOAD
and FDB_SLOW_PATH which allows bridge offloads to be created without
exposing its internal tables to any other modules since miss path of
managed TC-miss table is automatically wired to next priority.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
PATCHES OVERVIEW
1-3 - Miscellaneous refactorings and infrastructure changes.
4 - Mlx5 bridge offload infrastructure and dedicated fs_core
namespace/tables implementation.
5 - FDB entry offload.
6 - Dynamic FDB entry aging.
7-10 - VLAN filtering offload.
11 - Tracepoints for main mlx5 bridge offload events (FDB entry
offload/unoffload, VLAN add/delete, etc.)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
--
|
|
The NLMSG_LENGTH(0) may confuse the API users,
NLMSG_HDRLEN is much more clear.
Besides, some code style problems are also fixed.
Signed-off-by: Chen Li <chenli@uniontech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create new files bridge.{c|h} in en/rep directory that implement bridge
interaction with representor netdevices and handle required
events/notifications, bridge.{c|h} in esw directory that implement all
necessary eswitch offloading infrastructure and works on vport/eswitch
level. Provide new kconfig MLX5_BRIDGE which is automatically selected when
both kernel bridge and mlx5 eswitch configs are enabled.
Provide basic infrastructure for bridge offloads:
- struct mlx5_esw_bridge_offloads - per-eswitch bridge offload structure
that encapsulates generic bridge-offloads data (notifier blocks, ingress
flow table/group, etc.) that is created/deleted on enable/disable eswitch
offloads.
- struct mlx5_esw_bridge - per-bridge structure that encapsulates
per-bridge data (reference counter, FDB, egress flow table/group, etc.)
that is created when first eswitch represetor is attached to new bridge and
deleted when last representor is removed from the bridge as a result of
NETDEV_CHANGEUPPER event.
The bridge tables are created with new priority FDB_BR_OFFLOAD in FDB
namespace. The new priority is between tc-miss and slow path priorities.
Priority consist of two levels: the ingress table that is global per
eswitch and matches incoming packets by src_mac/vid and redirects them to
next level (egress table) that is chosen according to ingress port bridge
membership and matches on dst_mac/vid in order to redirect packet to vport
according to the following diagram:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
+--------------------------------------+
| | |
| +------+ |
| | |
| +------v--------+ FDB_BR_OFFLOAD |
| | INGRESS_TABLE | |
| +------+---+----+ |
| | | match |
| | +---------+ |
| | | | +-------+
| | +-------v-------+ match | | |
| | | EGRESS_TABLE +------------> vport |
| | +-------+-------+ | | |
| | | | +-------+
| | miss | |
| +------+------+ |
| | |
+--------------------------------------+
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In order to adhere to kernel software datapath model bridge offloads must
come after TC and NF FDBs. Following patches in this series add new FDB
priority for bridge after FDB_FT_OFFLOAD. However, since netfilter offload
is implemented with unmanaged tables, its miss path is not automatically
connected to next priority and requires the code to manually connect with
slow table. To keep bridge offloads encapsulated and not mix it with
eswitch offloads, create a new FDB_TC_MISS priority between FDB_FT_OFFLOAD
and FDB_SLOW_PATH:
+
|
+---------v----------+
| |
| FDB_TC_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_FT_OFFLOAD |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_TC_MISS |
| |
+---------+----------+
|
|
|
+---------v----------+
| |
| FDB_SLOW_PATH |
| |
+---------+----------+
|
v
Initialize the new priority with single default empty managed table and use
the table as TC/NF miss patch instead of slow table. This approach allows
bridge offloads to be created as new FDB namespace priority between
FDB_TC_MISS and FDB_SLOW_PATH without exposing its internal tables to any
other modules since miss path of managed TC-miss table is automatically
wired to next priority.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Adding new reformat context type (INSERT_HEADER) requires adding two new
parameters to reformat context - reformat_param_0 and reformat_param_1.
As defined by HW spec, these parameters have different meaning for
different reformat context type.
The first parameter (reformat_param_0) is not new to HW spec, but it
wasn't used by any of the supported reformats. The second parameter
(reformat_param_1) is new to the HW spec - it was added to allow
supporting INSERT_HEADER.
For NSERT_HEADER, reformat_param_0 indicates the header used to
reference the location of the inserted header, and reformat_param_1
indicates the offset of the inserted header from the reference point
defined by reformat_param_0.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for HCA caps 2 that contains capabilities for the new
insert/remove header actions.
Added the required definitions for supporting the new reformat type:
added packet reformat parameters, reformat anchors and definitions
to allow copy/set into the inserted EMD (Embedded MetaData) tag.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add nfgenmsg field to nfnetlink's struct nfnl_info and use it.
2) Remove nft_ctx_init_from_elemattr() and nft_ctx_init_from_setattr()
helper functions.
3) Add the nf_ct_pernet() helper function to fetch the conntrack
pernetns data area.
4) Expose TCP and UDP flowtable offload timeouts through sysctl,
from Oz Shlomo.
5) Add nfnetlink_hook subsystem to fetch the netfilter hook
pipeline configuration, from Florian Westphal. This also includes
a new field to annotate the hook type as metadata.
6) Fix unsafe memory access to non-linear skbuff in the new SCTP
chunk support for nft_exthdr, from Phil Sutter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.
v2 changes:
- remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
- unwrap dev_err() message in stmmac_main.c
- add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c
v3 changes:
- add error pointer to dev_err() output
- add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
- revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
on the returned value of ret by the calling function
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is quite unusual when some value can not be equal to a defined range
max value. Also most subsystems defines FOO_TYPE_MAX as a maximum valid
value. So turn the WAN_PORT_MAX meaning from the number of supported
port types to the maximum valid port type.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Intel mGbE supports 2.5Gbps link speed by increasing the clock rate by
2.5 times of the original rate. In this mode, the serdes/PHY operates at a
serial baud rate of 3.125 Gbps and the PCS data path and GMII interface of
the MAC operate at 312.5 MHz instead of 125 MHz.
For Intel mGbE, the overclocking of 2.5 times clock rate to support 2.5G is
only able to be configured in the BIOS during boot time. Kernel driver has
no access to modify the clock rate for 1Gbps/2.5G mode. The way to
determined the current 1G/2.5G mode is by reading a dedicated adhoc
register through mdio bus. In short, after the system boot up, it is either
in 1G mode or 2.5G mode which not able to be changed on the fly.
Compared to 1G mode, the 2.5G mode selects the 2500BASEX as PHY interface and
disables the xpcs_an_inband. This is to cater for some PHYs that only
supports 2500BASEX PHY interface with no autonegotiation.
v2: remove MAC supported link speed masking
v3: Restructure to introduce intel_speed_mode_2500() to read serdes registers
for max speed supported and select the appropritate configuration.
Use max_speed to determine the supported link speed mask.
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XPCS IP supports 2500BASEX as PHY interface. It is configured as
autonegotiation disable to cater for PHYs that does not supports 2500BASEX
autonegotiation.
v2: Add supported link speed masking.
v3: Restructure to introduce xpcs_config_2500basex() used to configure the
xpcs for 2.5G speeds. Added 2500BASEX specific information for
configuration.
v4: Fix indentation error
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Up to now several high speed NICs have custom mechanisms of recycling
the allocated memory they use for their payloads.
Our page_pool API already has recycling capabilities that are always
used when we are running in 'XDP mode'. So let's tweak the API and the
kernel network stack slightly and allow the recycling to happen even
during the standard operation.
The API doesn't take into account 'split page' policies used by those
drivers currently, but can be extended once we have users for that.
The idea is to be able to intercept the packet on skb_release_data().
If it's a buffer coming from our page_pool API recycle it back to the
pool for further usage or just release the packet entirely.
To achieve that we introduce a bit in struct sk_buff (pp_recycle:1) and
a field in struct page (page->pp) to store the page_pool pointer.
Storing the information in page->pp allows us to recycle both SKBs and
their fragments.
We could have skipped the skb bit entirely, since identical information
can bederived from struct page. However, in an effort to affect the free path
as less as possible, reading a single bit in the skb which is already
in cache, is better that trying to derive identical information for the
page stored data.
The driver or page_pool has to take care of the sync operations on it's own
during the buffer recycling since the buffer is, after opting-in to the
recycling, never unmapped.
Since the gain on the drivers depends on the architecture, we are not
enabling recycling by default if the page_pool API is used on a driver.
In order to enable recycling the driver must call skb_mark_for_recycle()
to store the information we need for recycling in page->pp and
enabling the recycling bit, or page_pool_store_mem_info() for a fragment.
Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Co-developed-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a prerequisite patch, the next one is enabling recycling of
skbs and fragments. Add an extra argument on __skb_frag_unref() to
handle recycling, and update the current users of the function with that.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is needed by the page_pool to avoid recycling a page not allocated
via page_pool.
The page->signature field is aliased to page->lru.next and
page->compound_head, but it can't be set by mistake because the
signature value is a bad pointer, and can't trigger a false positive
in PageTail() because the last bit is 0.
Co-developed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-07
This series contains updates to virtchnl header file and ice driver.
Brett adds capability bits to virtchnl to specify whether a primary or
secondary MAC address is being requested and adds the implementation to
ice. He also adds storing of VF MAC address so that it will be preserved
across reboots of VM and refactors VF queue configuration to remove the
expectation that configuration be done all at once.
Krzysztof refactors ice_setup_rx_ctx() to remove configuration not
related to Rx context into a new function, ice_vsi_cfg_rxq().
Liwei Song extends the wait time for the global config timeout.
Salil Mehta refactors code in ice_vsi_set_num_qs() to remove an
unnecessary call when the user has requested specific number of Rx or Tx
queues.
Jesse converts define macros to static inlines for NOP configurations.
Jake adds messaging when devlink fails to read device capabilities and
when pldmfw cannot find the requested firmware. Adds a wait for reset
completion when reporting devlink info and reinitializes NVM during
rebuild to ensure values are current.
Ani adds detection and reporting of modules exceeding supported power
levels and changes an error message to a debug message.
Paul fixes a clang warning for deadcode.DeadStores.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Bug fixes overlapping feature additions and refactoring, mostly.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "reverse RMII" protocol name is a personal invention, derived from
"reverse MII".
Just like MII, RMII is an asymmetric protocol in that a PHY behaves
differently than a MAC. In the case of RMII, for example:
- the 50 MHz clock signals are either driven by the MAC or by an
external oscillator (but never by the PHY).
- the PHY can transmit extra in-band control symbols via RXD[1:0] which
the MAC is supposed to understand, but a PHY isn't.
The "reverse MII" protocol is not standardized either, except for this
web document:
https://www.eetimes.com/reverse-media-independent-interface-revmii-block-architecture/#
In short, it means that the Ethernet controller speaks the 4-bit data
parallel protocol from the perspective of a PHY (it acts like a PHY).
This might mean that it implements clause 22 compatible registers,
although that is optional - the important bit is that its pins can be
connected to an MII MAC and it will 'just work'.
In this discussion thread:
https://lore.kernel.org/netdev/20210201214515.cx6ivvme2tlquge2@skbuf/
we agreed that it would be an abuse of terms to use the "RevMII" name
for anything than the 4-bit parallel MII protocol. But since all the
same concepts can be applied to the 2-bit Reduced MII protocol as well,
here we are introducing a "Reverse RMII" protocol. This means: "behave
like an RMII PHY".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.
Below are the values that should be used by all VF drivers going
forward.
VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
drivers that don't support the new type bits). The PF drivers
will track VF's device/primary unicast MAC, but this will only
be a best effort.
VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
device/primary unicast MAC. It should be used for both delete
and add cases related to the device/primary unicast MAC.
VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
MAC addresses that are not the device/primary unicast MAC. For
example, extra unicast addresses and multicast addresses
assuming the PF supports "extra" addresses at all.
If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
This nfnl subsystem allows to dump the list of all active netfiler hooks,
e.g. defrag, conntrack, nf/ip/arp/ip6tables and so on.
This helps to see what kind of features are currently enabled in
the network stack.
Sample output from nft tool using this infra:
$ nft list hook ip input
family ip hook input {
+0000000010 nft_do_chain_inet [nf_tables] # nft table firewalld INPUT
+0000000100 nf_nat_ipv4_local_in [nf_nat]
+2147483647 ipv4_confirm [nf_conntrack]
}
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This will allow a followup patch to treat the 'ops->priv' pointer
as nft_chain argument without having to first walk the table/chains
to check if there is a matching base chain pointer.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently the aging period for tcp/udp connections is hard coded to
30 seconds. Aged tcp/udp connections configure a hard coded 120/30
seconds pickup timeout for conntrack.
This configuration may be too aggressive or permissive for some users.
Dynamically configure the nf flow table GC timeout intervals according
to the user defined values.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
UDP connections may be offloaded from nf conntrack to nf flow table.
Offloaded connections are aged after 30 seconds of inactivity.
Once aged, ownership is returned to conntrack with a hard coded pickup
time of 30 seconds, after which the connection may be deleted.
eted. The current aging intervals may be too aggressive for some users.
Provide users with the ability to control the nf flow table offload
aging and pickup time intervals via sysctl parameter as a pre-step for
configuring the nf flow table GC timeout intervals.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
TCP connections may be offloaded from nf conntrack to nf flow table.
Offloaded connections are aged after 30 seconds of inactivity.
Once aged, ownership is returned to conntrack with a hard coded pickup
time of 120 seconds, after which the connection may be deleted.
eted. The current aging intervals may be too aggressive for some users.
Provide users with the ability to control the nf flow table offload
aging and pickup time intervals via sysctl parameter as a pre-step for
configuring the nf flow table GC timeout intervals.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Consolidate call to net_generic(net, nf_conntrack_net_id) in this
wrapper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update the nfnl_info structure to add a pointer to the nfnetlink header.
This simplifies the existing codebase since this header is usually
accessed. Update existing clients to use this new field.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-06-04
This series contains updates to virtchnl header file and ice driver.
Brett fixes VF being unable to request a different number of queues then
allocated and adds clearing of VF_MBX_ATQLEN register for VF reset.
Haiyue handles error of rebuilding VF VSI during reset.
Paul fixes reporting of autoneg to use the PHY capabilities.
Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be
transmitted.
Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs
structure in the virtchnl header file.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MPTCP is builtin, so no need to add EXPORT_SYMBOL()s.
It will be used to support SO_TIMESTAMP(NS) ancillary
messages in the mptcp receive path.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to previous patch: expose SO_TIMESTAMPING helper so we do not
have to copy & paste this into the mptcp core.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This exports SO_TIMESTAMP_* function for re-use by MPTCP.
Without this there is too much copy & paste needed to support
this from mptcp setsockopt path.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On m68k (Coldfire M547x):
CC drivers/net/ethernet/intel/i40e/i40e_main.o
In file included from drivers/net/ethernet/intel/i40e/i40e_prototype.h:9,
from drivers/net/ethernet/intel/i40e/i40e.h:41,
from drivers/net/ethernet/intel/i40e/i40e_main.c:12:
include/linux/avf/virtchnl.h:153:36: warning: division by zero [-Wdiv-by-zero]
153 | { virtchnl_static_assert_##X = (n)/((sizeof(struct X) == (n)) ? 1 : 0) }
| ^
include/linux/avf/virtchnl.h:844:1: note: in expansion of macro ‘VIRTCHNL_CHECK_STRUCT_LEN’
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/avf/virtchnl.h:844:33: error: enumerator value for ‘virtchnl_static_assert_virtchnl_proto_hdrs’ is not an integer constant
844 | VIRTCHNL_CHECK_STRUCT_LEN(2312, virtchnl_proto_hdrs);
| ^~~~~~~~~~~~~~~~~~~
On m68k, integers are aligned on addresses that are multiples of two,
not four, bytes. Hence the size of a structure containing integers may
not be divisible by 4.
Fix this by adding explicit padding.
Fixes: 1f7ea1cd6a374842 ("ice: Enable FDIR Configure for AVF")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
bluetooth pull request for net:
- Fixes UAF and CVE-2021-3564
- Fix VIRTIO_ID_BT to use an unassigned ID
- Fix firmware loading on some Intel Controllers
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Including <linux/in.h> and <netinet/in.h> in the dependencies breaks
compilation of trinity due to multiple definitions. <linux/in.h> is only
used in <linux/icmp.h> to provide the definition of the struct in_addr,
but this can be substituted out by using the datatype __be32.
Signed-off-by: Andreas Roeseler <andreas.a.roeseler@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
caif_enroll_dev() can fail in some cases. Ingnoring
these cases can lead to memory leak due to not assigning
link_support pointer to anywhere.
Fixes: 7c18d2205ea7 ("caif: Restructure how link caif link layer enroll")
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added cfserl_release() function.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
This series provides misc updates for mlx5 drivers.
For more information please see tag log below.
Please pull and let me know if there is any problem.
mlx5-updates-2021-06-03
This series contains misc updates for mlx5 driver
1) Alaa disables advanced features when kdump mode to save on memory
2) Jakub counts all link flap events
3) Meir adds support for IPoIB NDR speed
4) Various misc cleanup
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces APIs which the NVMeTCP Offload device (qedn)
will use through the paired net-device (qede).
It includes APIs for:
- ipv4/ipv6 routing
- get VLAN from net-device
- TCP ports reservation
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Nikolay Assa <nassa@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the NVMeTCP FW initializations which is used
to initialize the IO level configuration into a per IO HW
resource ("task") as part of the IO path flow.
This includes:
- Write IO FW initialization
- Read IO FW initialization.
- IC-Req and IC-Resp FW exchange.
- FW Cleanup flow (Flush IO).
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the NVMeTCP Offload FW and HW HSI in order
to initialize the IO level configuration into a per IO HW
resource ("task") as part of the IO path flow.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the functionality of HW filter block.
It adds and removes filters based on source and target TCP port.
It also add functionality to clear all filters at once.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the NVMeTCP HSI and HSI functionality in order to
initialize and interact with the HW device as part of the connection level
HSI.
This includes:
- Connection offload: offload a TCP connection to the FW.
- Connection update: update the ICReq-ICResp params
- Connection clear SQ: outstanding IOs FW flush.
- Connection termination: terminate the TCP connection and flush the FW.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces the NVMeTCP device and PF level HSI and HSI
functionality in order to initialize and interact with the HW device.
The patch also adds qed NVMeTCP personality.
This patch is based on the qede, qedr, qedi, qedf drivers HSI.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Dean Balandin <dbalandin@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add TCP_ULP as a storage common TCP offload FW resource layout.
This will be used by the core driver (QED) for both the NVMeTCP and iSCSI.
Acked-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com>
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It turned out that the VIRTIO_ID_* are not assigned in the virtio_ids.h
file in the upstream kernel. Picking the next free one was wrong and
there is a process that has been followed now.
See https://github.com/oasis-tcs/virtio-spec/issues/108 for details.
Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Since all the remaining members of struct mdio_xpcs_ops have direct
equivalents in struct phylink_pcs_ops, it is about time we remove it
altogether.
Since the phylink ops return void, we need to remove the error
propagation from the various xpcs methods and simply print an error
message where appropriate.
Since xpcs_get_state_c73() detects link faults and attempts to reset the
link on its own by calling xpcs_config(), but xpcs_config() now has a
lot of phylink arguments which are not needed and cannot be simply
fabricated by anybody else except phylink, the actual implementation has
been moved into a smaller xpcs_do_config().
The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we
need to look at the struct mdio_xpcs_args pointer now as an indication
whether the port has an XPCS or not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar
thing on probe, which is to have a *_create function that takes a
struct mdio_device * given by the caller, and builds a private PCS
structure around that.
This changes stmmac to hold only a pointer to the xpcs, as opposed to
the full structure. This will be used in the next patch when struct
mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops
is used as a shorthand to determine whether the port has an XPCS or not.
We can do the same now with the mdio_xpcs_args pointer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Similar to the other recently functions, it is not necessary for
xpcs_probe to be a function pointer, so export it so that it can be
called directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
