summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-04-26net/mlx5e: Add ethtool support for dump module EEPROMGal Pressman
Add query MCIA, PMLP registers infrastructure and commands. Add ethtool support for get_module_info() and get_module_eeprom() callbacks. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add ethtool support for interface identify (LED blinking)Gal Pressman
Add the needed hardware command and mlx5_ifc structs for managing LED control. Add set_phys_id ethtool callback to support ethtool -p flag. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add support for RXALL netdev featureEran Ben Elisha
Introduce new access register named Ports Check Mask Register (PCMR) to control all HW checks on port. With this register, the driver can enable/disable Hardware FCS validation. When RXALL is enabled/disabled using ndo_set_features, enable/disable fcs check at HW. User can change HW configuration using rx-all flag at ethtool. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Add link down events counterGal Pressman
Expose link_down_events counter through ethtool -S. This counter is read from PPort statistics, then proccessed and stored as a special handling software counter. This counter is stored along software counters since it is the only PPort counter that it's size is not 64 bits. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net/mlx5e: Statistics handling refactoringGal Pressman
Redesign ethtool statistics handling and reporting in the driver: 1. Move counters to a separate file (en_stats.h). 2. Remove unnecessary dependencies between stats and strings. 3. Use counter descriptors which hold a name and offset for each counter, and will be used to decide which counters will be exposed. For example when adding a new software counter to ethtool, instead of: 1. Add to stats struct. 2. Add to strings struct in the same order. 3. Change macro defining number of software counters. The only thing needed is to link the new counter to a counter descriptor. VPort counters are a set of hardware traffic counters created automatically for each virtual port opened. PPort counters are a set of counters describing per physical port performance statistics. These counters are gathered from hardware register and divided to groups according to different protocols. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26net: remove NETDEV_TX_LOCKED supportFlorian Westphal
No more users in the tree, remove NETDEV_TX_LOCKED support. Adds another hole in softnet_stats struct, but better than keeping the unused collision counter around. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-26 Here's another set of Bluetooth & 802.15.4 patches for the 4.7 kernel: - Cleanups & refactoring of ieee802154 & 6lowpan code - Security related additions to ieee802154 and mrf24j40 driver - Memory corruption fix to Bluetooth 6lowpan code - Race condition fix in vhci driver - Enhancements to the atusb 802.15.4 driver Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sched: align nlattr properly when neededNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ovs: align nlattr properly when neededNicolas Dichtel
I also fix commit 8b32ab9e6ef1: use nla_total_size_64bit() for OVS_FLOW_ATTR_USED in ovs_flow_cmd_msg_size(). Fixes: 8b32ab9e6ef1 ("ovs: use nla_put_u64_64bit()") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26sock_diag: align nlattr properly when neededNicolas Dichtel
I also fix the value of INET_DIAG_MAX. It's wrong since commit 8f840e47f190 which is only in net-next right now, thus I didn't make a separate patch. Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26fs/quota: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26macsec: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-26ila: add checksum neutral ILA translationsTom Herbert
Support checksum neutral ILA as described in the ILA draft. The low order 16 bits of the identifier are used to contain the checksum adjustment value. The csum-mode parameter is added to described checksum processing. There are three values: - adjust transport checksum (previous behavior) - do checksum neutral mapping - do nothing On output the csum-mode in the ila_params is checked and acted on. If mode is checksum neutral mapping then to mapping and set C-bit. On input, C-bit is checked. If it is set checksum-netural mapping is done (regardless of csum-mode in ila params) and C-bit will be cleared. If it is not set then action in csum-mode is taken. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25skbuff: Add pskb_extract() helper functionSowmini Varadhan
A pattern of skb usage seen in modules such as RDS-TCP is to extract `to_copy' bytes from the received TCP segment, starting at some offset `off' into a new skb `clone'. This is done in the ->data_ready callback, where the clone skb is queued up for rx on the PF_RDS socket, while the parent TCP segment is returned unchanged back to the TCP engine. The existing code uses the sequence clone = skb_clone(..); pskb_pull(clone, off, ..); pskb_trim(clone, to_copy, ..); with the intention of discarding the first `off' bytes. However, skb_clone() + pskb_pull() implies pksb_expand_head(), which ends up doing a redundant memcpy of bytes that will then get discarded in __pskb_pull_tail(). To avoid this inefficiency, this commit adds pskb_extract() that creates the clone, and memcpy's only the relevant header/frag/frag_list to the start of `clone'. pskb_trim() is then invoked to trim clone down to the requested to_copy bytes. Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25fq: add fair queuing frameworkMichal Kazior
This works on the same implementation principle as codel*.h, i.e. there's a generic header with structures and macros and a implementation header carrying function definitions to include in given, e.g. driver or module. The fairness logic comes from net/sched/sch_fq_codel.c but is generalized so it is more flexible and easier to re-use. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25codel: split into multiple filesMichal Kazior
It was impossible to include codel.h for the purpose of having access to codel_params or codel_vars structure definitions and using them for embedding in other more complex structures. This splits allows codel.h itself to be treated like any other header file while codel_qdisc.h and codel_impl.h contain function definitions with logic that was previously in codel.h. This copies over copyrights and doesn't involve code changes other than adding a few additional include directives to net/sched/sch*codel.c. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25codel: generalize the implementationMichal Kazior
This strips out qdisc specific bits from the code and makes it slightly more reusable. Codel will be used by wireless/mac80211 in the future. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25route: move lwtunnel state to a single placeJiri Benc
Commit 751a587ac9f9 ("route: fix breakage after moving lwtunnel state") moved lwtstate to the end of dst_entry for 32bit archs. This makes it share the cacheline with __refcnt which had an unkown effect on performance. For this reason, the pointer was kept in place for 64bit archs. However, later performance measurements showed this is of no concern. It turns out that every performance sensitive path that accesses lwtstate accesses also struct rtable or struct rt6_info which share the same cache line. Thus, to get rid of a few #ifdefs, move the field to the end of the struct also for 64bit. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Conditions for changing linkYuval Mintz
There's some inconsistency in current logic determining whether the link settings of a given interface can be changed; I.e., in all modes other than the so-called `deault' mode the interfaces are forbidden from changing the configuration - but even this rule is not applied to all user APIs that may change the configuration. Instead, let the core-module [qed] decide whether an interface can change the configuration by supporting a new API function. We also revise the current rule, allowing all interfaces to change their configurations while laying the infrastructure for future modes where an interface would be blocked from making such a configuration. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25qed*: Align statistics namesYuval Mintz
There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25wireless: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25netfilter/ipvs: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ieee802154: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25l2tp: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25bridge: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ovs: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv6: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25sched: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25rtnl: use nla_put_u64_64bit()Nicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25soreuseport: Resolve merge conflict for v4/v6 ordering fixCraig Gallek
d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") was merged as a bug fix to the net tree. Two conflicting changes were committed to net-next before the above fix was merged back to net-next: ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU") 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") These changes switched the datastructure used for TCP and UDP sockets from hlist_nulls to hlist. This patch applies the necessary parts of the net tree fix to net-next which were not automatic as part of the merge. Fixes: 1602f49b58ab ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25sock: relax WARN_ON() in sock_owned_by_user()Eric Dumazet
Valdis reported tons of stack dumps caused by WARN_ON() in sock_owned_by_user() This test needs to be relaxed if/when lockdep disables itself. Note that other lockdep_sock_is_held() callers are all from rcu_dereference_protected() sections which already are disabled if/when lockdep has been disabled. Fixes: fafc4e1ea1a4 ("sock: tigthen lockdep checks for sock_owned_by_user") Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24tcp-tso: do not split TSO packets at retransmit timeEric Dumazet
Linux TCP stack painfully segments all TSO/GSO packets before retransmits. This was fine back in the days when TSO/GSO were emerging, with their bugs, but we believe the dark age is over. Keeping big packets in write queues, but also in stack traversal has a lot of benefits. - Less memory overhead, because write queues have less skbs - Less cpu overhead at ACK processing. - Better SACK processing, as lot of studies mentioned how awful linux was at this ;) - Less cpu overhead to send the rtx packets (IP stack traversal, netfilter traversal, drivers...) - Better latencies in presence of losses. - Smaller spikes in fq like packet schedulers, as retransmits are not constrained by TCP Small Queues. 1 % packet losses are common today, and at 100Gbit speeds, this translates to ~80,000 losses per second. Losses are often correlated, and we see many retransmit events leading to 1-MSS train of packets, at the time hosts are already under stress. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for your net-next tree, mostly from Florian Westphal to sort out the lack of sufficient validation in x_tables and connlabel preparation patches to add nf_tables support. They are: 1) Ensure we don't go over the ruleset blob boundaries in mark_source_chains(). 2) Validate that target jumps land on an existing xt_entry. This extra sanitization comes with a performance penalty when loading the ruleset. 3) Introduce xt_check_entry_offsets() and use it from {arp,ip,ip6}tables. 4) Get rid of the smallish check_entry() functions in {arp,ip,ip6}tables. 5) Make sure the minimal possible target size in x_tables. 6) Similar to #3, add xt_compat_check_entry_offsets() for compat code. 7) Check that standard target size is valid. 8) More sanitization to ensure that the target_offset field is correct. 9) Add xt_check_entry_match() to validate that matches are well-formed. 10-12) Three patch to reduce the number of parameters in translate_compat_table() for {arp,ip,ip6}tables by using a container structure. 13) No need to return value from xt_compat_match_from_user(), so make it void. 14) Consolidate translate_table() so it can be used by compat code too. 15) Remove obsolete check for compat code, so we keep consistent with what was already removed in the native layout code (back in 2007). 16) Get rid of target jump validation from mark_source_chains(), obsoleted by #2. 17) Introduce xt_copy_counters_from_user() to consolidate counter copying, and use it from {arp,ip,ip6}tables. 18,22) Get rid of unnecessary explicit inlining in ctnetlink for dump functions. 19) Move nf_connlabel_match() to xt_connlabel. 20) Skip event notification if connlabel did not change. 21) Update of nf_connlabels_get() to make the upcoming nft connlabel support easier. 23) Remove spinlock to read protocol state field in conntrack. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23xfrm: align nlattr properly when neededNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: add nla_put_u64_64bit() helperNicolas Dichtel
With this function, nla_data() is aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_msecs(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_s64(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. In fact, there is no user of this function. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_net64(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. The temporary function nla_put_be64_32bit() is removed in this patch. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_be64(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. A temporary version (nla_put_be64_32bit()) is added for nla_put_net64(). This function is removed in the next patch. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23libnl: nla_put_le64(): align on a 64-bit areaNicolas Dichtel
nla_data() is now aligned on a 64-bit area. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-22Bluetooth: Add defines for SPI and I2CJohan Hedberg
Extend the set of possible HCI bus types with SPI and I2C. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix memory leak in iwlwifi, from Matti Gottlieb. 2) Add missing registration of netfilter arp_tables into initial namespace, from Florian Westphal. 3) Fix potential NULL deref in DecNET routing code. 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry Ivanov. 5) Fix dst ref counting in VRF, from David Ahern. 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck. 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause. 8) Ravalidate IPV6 datagram socket cached routes properly, particularly with UDP, from Martin KaFai Lau. 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang. 10) Fix stats typing in bcmgenet driver, from Eric Dumazet. 11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing, from Joe Stringer. 12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown. 13) atl2 doesn't actually support scatter-gather, so don't advertise the feature. From Ben Hucthings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) openvswitch: use flow protocol when recalculating ipv6 checksums Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets atl2: Disable unimplemented scatter/gather feature net/mlx4_en: Split SW RX dropped counter per RX ring net/mlx4_core: Don't allow to VF change global pause settings net/mlx4_core: Avoid repeated calls to pci enable/disable net/mlx4_core: Implement pci_resume callback net: phy: spi_ks8895: Don't leak references to SPI devices net: ethernet: davinci_emac: Fix platform_data overwrite net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable qede: Fix single MTU sized packet from firmware GRO flow qede: Fix setting Skb network header qede: Fix various memory allocation error flows for fastpath tcp: Merge tx_flags and tskey in tcp_shifted_skb tcp: Merge tx_flags and tskey in tcp_collapse_retrans drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks openvswitch: Orphan skbs before IPv6 defrag Revert "Prevent NUll pointer dereference with two PHYs on cpsw" VSOCK: Only check error on skb_recv_datagram when skb is NULL ...
2016-04-21geneve: break dependency with netdev driversHannes Frederic Sowa
Equivalent to "vxlan: break dependency with netdev drivers", don't autoload geneve module in case the driver is loaded. Instead make the coupling weaker by using netdevice notifiers as proxy. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21vxlan: break dependency with netdev driversHannes Frederic Sowa
Currently all drivers depend and autoload the vxlan module because how vxlan_get_rx_port is linked into them. Remove this dependency: By using a new event type in the netdevice notifier call chain we proxy the request from the drivers to flush and resetup the vxlan ports not directly via function call but by the already existing netdevice notifier call chain. I added a separate new event type, NETDEV_OFFLOAD_PUSH_VXLAN, to do so. We don't need to save those ids, as the event type field is an unsigned long and using specialized event types for this purpose seemed to be a more elegant way. This also comes in beneficial if in future we want to add offloading knobs for vxlan. Cc: Jesse Gross <jesse@kernel.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5e: Support RX multi-packet WQE (Striding RQ)Tariq Toukan
Introduce the feature of multi-packet WQE (RX Work Queue Element) referred to as (MPWQE or Striding RQ), in which WQEs are larger and serve multiple packets each. Every WQE consists of many strides of the same size, every received packet is aligned to a beginning of a stride and is written to consecutive strides within a WQE. In the regular approach, each regular WQE is big enough to be capable of serving one received packet of any size up to MTU or 64K in case of device LRO is enabled, making it very wasteful when dealing with small packets or device LRO is enabled. For its flexibility, MPWQE allows a better memory utilization (implying improvements in CPU utilization and packet rate) as packets consume strides according to their size, preserving the rest of the WQE to be available for other packets. MPWQE default configuration: Num of WQEs = 16 Strides Per WQE = 2048 Stride Size = 64 byte The default WQEs memory footprint went from 1024*mtu (~1.5MB) to 16 * 2048 * 64 = 2MB per ring. However, HW LRO can now be supported at no additional cost in memory footprint, and hence we turn it on by default and get an even better performance. Performance tested on ConnectX4-Lx 50G. To isolate the feature under test, the numbers below were measured with HW LRO turned off. We verified that the performance just improves when LRO is turned back on. * Netperf single TCP stream: - BW raised by 10-15% for representative packet sizes: default, 64B, 1024B, 1478B, 65536B. * Netperf multi TCP stream: - No degradation, line rate reached. * Pktgen: packet rate raised by 2-10% for traffic of different message sizes: 64B, 128B, 256B, 1024B, and 1500B. * Pktgen: packet loss in bursts of small messages (64byte), single stream: - | num packets | packets loss before | packets loss after | 2K | ~ 1K | 0 | 8K | ~ 6K | 0 | 16K | ~13K | 0 | 32K | ~28K | 0 | 64K | ~57K | ~24K As expected as the driver can receive as many small packets (<=64B) as the number of total strides in the ring (default = 2048 * 16) vs. 1024 (default ring size regardless of packets size) before this feature. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx5: Introduce device queue countersTariq Toukan
A queue counter can collect several statistics for one or more hardware queues (QPs, RQs, etc ..) that the counter is attached to. For Ethernet it will provide an "out of buffer" counter which collects the number of all packets that are dropped due to lack of software buffers. Here we add device commands to alloc/query/dealloc queue counters. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21net/mlx4_core: Avoid repeated calls to pci enable/disableDaniel Jurgens
Maintain the PCI status and provide wrappers for enabling and disabling the PCI device. Performing the actions more than once without doing its opposite results in warning logs. This occurred when EEH hotplugged the device causing a warning for disabling an already disabled device. Fixes: 2ba5fbd62b25 ('net/mlx4_core: Handle AER flow properly') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21tcp: Merge tx_flags and tskey in tcp_shifted_skbMartin KaFai Lau
After receiving sacks, tcp_shifted_skb() will collapse skbs if possible. tx_flags and tskey also have to be merged. This patch reuses the tcp_skb_collapse_tstamp() to handle them. BPF Output Before: ~~~~~ <no-output-due-to-missing-tstamp-event> BPF Output After: ~~~~~ <...>-2024 [007] d.s. 88.644374: : ee_data:14599 Packetdrill Script: ~~~~~ +0 `sysctl -q -w net.ipv4.tcp_min_tso_segs=10` +0 `sysctl -q -w net.ipv4.tcp_no_metrics_save=1` +0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7> 0.100 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> 0.200 < . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_NODELAY, [1], 4) = 0 0.200 write(4, ..., 1460) = 1460 +0 setsockopt(4, SOL_SOCKET, 37, [2688], 4) = 0 0.200 write(4, ..., 13140) = 13140 0.200 > P. 1:1461(1460) ack 1 0.200 > . 1461:8761(7300) ack 1 0.200 > P. 8761:14601(5840) ack 1 0.300 < . 1:1(0) ack 1 win 257 <sack 1461:14601,nop,nop> 0.300 > P. 1:1461(1460) ack 1 0.400 < . 1:1(0) ack 14601 win 257 0.400 close(4) = 0 0.400 > F. 14601:14601(0) ack 1 0.500 < F. 1:1(0) ack 14602 win 257 0.500 > . 14602:14602(0) ack 2 Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Tested-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21ipmr: align RTA_MFC_STATS on 64-bitNicolas Dichtel
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2026-04-26 19:46:00 +0000