| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 5 are cc:stable, 4 are against mm/
All are singletons - please see the respective changelogs for details"
* tag 'mm-hotfixes-stable-2025-11-16-10-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm, swap: fix potential UAF issue for VMA readahead
selftests/user_events: fix type cast for write_index packed member in perf_test
lib/test_kho: check if KHO is enabled
mm/huge_memory: fix folio split check for anon folios in swapcache
MAINTAINERS: update David Hildenbrand's email address
crash: fix crashkernel resource shrink
mm: fix MAX_FOLIO_ORDER on powerpc configs with hugetlb
|
|
In the past, CONFIG_ARCH_HAS_GIGANTIC_PAGE indicated that we support
runtime allocation of gigantic hugetlb folios. In the meantime it evolved
into a generic way for the architecture to state that it supports gigantic
hugetlb folios.
In commit fae7d834c43c ("mm: add __dump_folio()") we started using
CONFIG_ARCH_HAS_GIGANTIC_PAGE to decide MAX_FOLIO_ORDER: whether we could
have folios larger than what the buddy can handle. In the context of that
commit, we started using MAX_FOLIO_ORDER to detect page corruptions when
dumping tail pages of folios. Before that commit, we assumed that we
cannot have folios larger than the highest buddy order, which was
obviously wrong.
In commit 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes
when registering hstate"), we used MAX_FOLIO_ORDER to detect
inconsistencies, and in fact, we found some now.
Powerpc allows for configs that can allocate gigantic folio during boot
(not at runtime), that do not set CONFIG_ARCH_HAS_GIGANTIC_PAGE and can
exceed PUD_ORDER.
To fix it, let's make powerpc select CONFIG_ARCH_HAS_GIGANTIC_PAGE with
hugetlb on powerpc, and increase the maximum folio size with hugetlb to 16
GiB on 64bit (possible on arm64 and powerpc) and 1 GiB on 32 bit
(powerpc). Note that on some powerpc configurations, whether we actually
have gigantic pages depends on the setting of CONFIG_ARCH_FORCE_MAX_ORDER,
but there is nothing really problematic about setting it unconditionally:
we just try to keep the value small so we can better detect problems in
__dump_folio() and inconsistencies around the expected largest folio in
the system.
Ideally, we'd have a better way to obtain the maximum hugetlb folio size
and detect ourselves whether we really end up with gigantic folios. Let's
defer bigger changes and fix the warnings first.
While at it, handle gigantic DAX folios more clearly: DAX can only end up
creating gigantic folios with HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD.
Add a new Kconfig option HAVE_GIGANTIC_FOLIOS to make both cases clearer.
In particular, worry about ARCH_HAS_GIGANTIC_PAGE only with HUGETLB_PAGE.
Note: with enabling CONFIG_ARCH_HAS_GIGANTIC_PAGE on powerpc, we will now
also allow for runtime allocations of folios in some more powerpc configs.
I don't think this is a problem, but if it is we could handle it through
__HAVE_ARCH_GIGANTIC_PAGE_RUNTIME_SUPPORTED.
While __dump_page()/__dump_folio was also problematic (not handling
dumping of tail pages of such gigantic folios correctly), it doesn't seem
critical enough to mark it as a fix.
Link: https://lkml.kernel.org/r/20251114214920.2550676-1-david@kernel.org
Fixes: 7b4f21f5e038 ("mm/hugetlb: check for unreasonable folio sizes when registering hstate")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Closes: https://lore.kernel.org/r/3e043453-3f27-48ad-b987-cc39f523060a@csgroup.eu/
Reported-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Closes: https://lore.kernel.org/r/94377f5c-d4f0-4c0f-b0f6-5bf1cd7305b1@linux.ibm.com/
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fix from Ingo Molnar:
"Fix a broken #ifndef in the <linux/entry-virt.h> header.
It hasn't caused problems upstream yet because no arch overrides
arch_xfer_to_guest_mode_handle_work() at this moment"
* tag 'core-urgent-2025-11-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Fix ifndef around arch_xfer_to_guest_mode_handle_work() stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Cache the ASPM L0s/L1 Supported bits early so quirks can override
them if necessary (Bjorn Helgaas)
- Add quirks for PA Semi and Freescale Root Ports and a HiSilicon Wi-Fi
device that are reported to have broken L0s and L1 (Shawn Lin, Bjorn
Helgaas)
* tag 'pci-v6.18-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Avoid L0s and L1 on Hi1105 [19e5:1105] Wi-Fi
PCI/ASPM: Avoid L0s and L1 on PA Semi [1959:a002] Root Ports
PCI/ASPM: Avoid L0s and L1 on Freescale [1957:0451] Root Ports
PCI/ASPM: Convert quirks to override advertised link states
PCI/ASPM: Add pcie_aspm_remove_cap() to override advertised link states
PCI/ASPM: Cache L0s/L1 Supported so advertised link states can be overridden
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Use the actual segments in a request when for bvec based buffers
- Fix an odd case where the iovec might get leaked for a read/write
request, if it was newly allocated, overflowed the alloc cache, and
hit an early error
- Minor tweak to the query API added in this release, returning the
number of available entries
* tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs
io_uring/query: return number of available queries
io_uring/rw: ensure allocated iovec gets cleared for early failure
|
|
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block")
Reported-by: syzbot <syzkaller@googlegroups.com>
Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
The stub implementation of arch_xfer_to_guest_mode_handle_work() is
guarded by an #ifndef that incorrectly checks for the name
arch_xfer_to_guest_mode_work instead. It seems the function was renamed
to add "_handle" as a late change to the original patch, and the #ifndef
wasn't updated to go with it.
Change the #ifndef to match the name of the function. No users right now,
so no need to update any architecture code.
Fixes: 935ace2fb5cc4 ("entry: Provide infrastructure for work before transitioning to guest mode")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251105-entry-fix-ifndef-v1-1-d8d28045b627@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- two minor fixes for DMA API infrastructure: restoring proper
structure padding used in benchmark tests (Qinxin Xia) and global
DMA_BIT_MASK macro rework to make it a bit more clang friendly (James
Clark)
* tag 'dma-mapping-6.18-2025-11-12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Allow use of DMA_BIT_MASK(64) in global scope
dma-mapping: benchmark: Restore padding to ensure uABI remained consistent
|
|
Defective devices sometimes advertise support for ASPM L0s or L1 states
even if they don't work correctly.
Cache the L0s Supported and L1 Supported bits early in enumeration so
HEADER quirks can override the ASPM states advertised in Link Capabilities
before pcie_aspm_cap_init() enables ASPM.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-2-helgaas@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- hci_conn: Fix not cleaning up PA_LINK connections
- hci_event: Fix not handling PA Sync Lost event
- MGMT: cancel mesh send timer when hdev removed
- 6lowpan: reset link-local header on ipv6 recv path
- 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion
- L2CAP: export l2cap_chan_hold for modules
- 6lowpan: Don't hold spin lock over sleeping functions
- 6lowpan: add missing l2cap_chan_lock()
- btusb: reorder cleanup in btusb_disconnect to avoid UAF
- btrtl: Avoid loading the config file on security chips
* tag 'for-net-2025-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btrtl: Avoid loading the config file on security chips
Bluetooth: hci_event: Fix not handling PA Sync Lost event
Bluetooth: hci_conn: Fix not cleaning up PA_LINK connections
Bluetooth: 6lowpan: add missing l2cap_chan_lock()
Bluetooth: 6lowpan: Don't hold spin lock over sleeping functions
Bluetooth: L2CAP: export l2cap_chan_hold for modules
Bluetooth: 6lowpan: fix BDADDR_LE vs ADDR_LE_DEV address type confusion
Bluetooth: 6lowpan: reset link-local header on ipv6 recv path
Bluetooth: btusb: reorder cleanup in btusb_disconnect to avoid UAF
Bluetooth: MGMT: cancel mesh send timer when hdev removed
====================
Link: https://patch.msgid.link/20251111141357.1983153-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Building documentation produced the following warning:
WARNING: ./include/linux/ethtool.h:495 This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* IEEE 802.3ck/df defines 16 bins for FEC histogram plus one more for
This comment was not intended to be parsed as kernel-doc, so replace
the '/**' with '/*' to silence the warning and align with normal
comment style in header files.
No functional changes.
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Link: https://patch.msgid.link/20251110182545.2112596-1-kriish.sharma2006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO")
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Leon Romanovsky <leon@kernel.org>
Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
It's useful to know which query opcodes are available. Extend the
structure and return that. It's a trivial change, and even though it can
be painlessly extended later, it'd still require adding a v2 of the
structure.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
KHO allocates metadata for its preserved memory map using the slab
allocator via kzalloc(). This metadata is temporary and is used by the
next kernel during early boot to find preserved memory.
A problem arises when KFENCE is enabled. kzalloc() calls can be randomly
intercepted by kfence_alloc(), which services the allocation from a
dedicated KFENCE memory pool. This pool is allocated early in boot via
memblock.
When booting via KHO, the memblock allocator is restricted to a "scratch
area", forcing the KFENCE pool to be allocated within it. This creates a
conflict, as the scratch area is expected to be ephemeral and
overwriteable by a subsequent kexec. If KHO metadata is placed in this
KFENCE pool, it leads to memory corruption when the next kernel is loaded.
To fix this, modify KHO to allocate its metadata directly from the buddy
allocator instead of slab.
Link: https://lkml.kernel.org/r/20251021000852.2924827-4-pasha.tatashin@soleen.com
Fixes: fc33e4b44b27 ("kexec: enable KHO support for memory preservation")
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: David Matlack <dmatlack@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Page cache folios from a file system that support large block size (LBS)
can have minimal folio order greater than 0, thus a high order folio might
not be able to be split down to order-0. Commit e220917fa507 ("mm: split
a folio in minimum folio order chunks") bumps the target order of
split_huge_page*() to the minimum allowed order when splitting a LBS
folio. This causes confusion for some split_huge_page*() callers like
memory failure handling code, since they expect after-split folios all
have order-0 when split succeeds but in reality get min_order_for_split()
order folios and give warnings.
Fix it by failing a split if the folio cannot be split to the target
order. Rename try_folio_split() to try_folio_split_to_order() to reflect
the added new_order parameter. Remove its unused list parameter.
[The test poisons LBS folios, which cannot be split to order-0 folios, and
also tries to poison all memory. The non split LBS folios take more
memory than the test anticipated, leading to OOM. The patch fixed the
kernel warning and the test needs some change to avoid OOM.]
Link: https://lkml.kernel.org/r/20251017013630.139907-1-ziy@nvidia.com
Fixes: e220917fa507 ("mm: split a folio in minimum folio order chunks")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: syzbot+e6367ea2fdab6ed46056@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68d2c943.a70a0220.1b52b.02b3.GAE@google.com/
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
|
|
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Back from travel, thanks to Simona for handling things. regular fixes,
seems about the right size, but spread out a bit.
amdgpu has the usual range of fixes, xe has a few fixes, and nouveau
has a couple of fixes, one for blackwell modifiers on 8/16 bit
surfaces.
Otherwise a few small fixes for mediatek, sched, imagination and
pixpaper.
sched:
- Fix deadlock
amdgpu:
- Reset fixes
- Misc fixes
- Panel scaling fixes
- HDMI fix
- S0ix fixes
- Hibernation fix
- Secure display fix
- Suspend fix
- MST fix
amdkfd:
- Process cleanup fix
xe:
- Fix missing synchronization on unbind
- Fix device shutdown when doing FLR
- Fix user fence signaling order
i915:
- Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD
- Fix conversion between clock ticks and nanoseconds
mediatek:
- Disable AFBC support on Mediatek DRM driver
- Add pm_runtime support for GCE power control
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies"
* tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits)
drm/xe: Enforce correct user fence signaling order using
drm/xe: Do clean shutdown also when using flr
drm/xe: Move declarations under conditional branch
drm/xe/guc: Synchronize Dead CT worker with unbind
drm/amd/display: Enable mst when it's detected but yet to be initialized
drm/amdgpu: Fix wait after reset sequence in S3
drm/amd: Fix suspend failure with secure display TA
drm/amdgpu: fix gpu page fault after hibernation on PF passthrough
drm/tiny: pixpaper: add explicit dependency on MMU
drm/nouveau: Advertise correct modifiers on GB20x
drm: define NVIDIA DRM format modifiers for GB20x
drm/nouveau: set DMA mask before creating the flush page
drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb
drm/amd/display: Fix NULL deref in debugfs odm_combine_segments
drm/amdkfd: Don't clear PT after process killed
drm/amdgpu/smu: Handle S0ix for vangogh
drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
drm/amd/display: Fix black screen with HDMI outputs
drm/amd/display: Don't stretch non-native images by default in eDP
drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init()
...
|
|
Per Nathan, clang catches unused "static inline" functions in C files
since commit 6863f5643dd7 ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
Linus said:
> So I entirely ignore W=1 issues, because I think so many of the extra
> warnings are bogus.
>
> But if this one in particular is causing more problems than most -
> some teams do seem to use W=1 as part of their test builds - it's fine
> to send me a patch that just moves bad warnings to W=2.
>
> And if anybody uses W=2 for their test builds, that's THEIR problem..
Here is the change to bump the warning from W=1 to W=2.
Fixes: 6863f5643dd7 ("kbuild: allow Clang to find unused static inline functions for W=1 build")
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251106105000.2103276-1-andriy.shevchenko@linux.intel.com
[nathan: Adjust comment as well]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
imagination:
- kconfig: Fix dependencies
nouveau:
- Set DMA mask earlier
- Advertize correct modifiers for GB20x
pixpaper:
- kconfig: Fix dependencies
sched:
- Fix deadlock
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251106131244.GA155679@2a02-2454-fd5e-fd00-d540-1fd5-75b4-d5e2.dyn6.pyur.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
"This is a work-around for a (now fixed) corner case in the arm32 build
with Clang KCFI enabled.
- Introduce __nocfi_generic for arm32 Clang (Nathan Chancellor)"
* tag 'hardening-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
libeth: xdp: Disable generic kCFI pass for libeth_xdp_tx_xmit_bulk()
ARM: Select ARCH_USES_CFI_GENERIC_LLVM_PASS
compiler_types: Introduce __nocfi_generic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
|
LIBIE_FWLOG is unusable without DEBUG_FS. Mark it in Kconfig.
Fix build error on ixgbe when DEBUG_FS is not set. To not add another
layer of #if IS_ENABLED(LIBIE_FWLOG) in ixgbe fwlog code define debugfs
dentry even when DEBUG_FS isn't enabled. In this case the dummy
functions of LIBIE_FWLOG will be used, so not initialized dentry isn't a
problem.
Fixes: 641585bc978e ("ixgbe: fwlog support for e610")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/f594c621-f9e1-49f2-af31-23fbcb176058@roeck-us.net/
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251104172333.752445-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently we don't get stack trace via ORC unwinder on top of fgraph exit
handler. We can see that when generating stacktrace from kretprobe_multi
bpf program which is based on fprobe/fgraph.
The reason is that the ORC unwind code won't get pass the return_to_handler
callback installed by fgraph return probe machinery.
Solving this by creating stack frame in return_to_handler expected by
ftrace_graph_ret_addr function to recover original return address and
continue with the unwind.
Also updating the pt_regs data with cs/flags/rsp which are needed for
successful stack retrieval from ebpf bpf_get_stackid helper.
- in get_perf_callchain we check user_mode(regs) so CS has to be set
- in perf_callchain_kernel we call perf_hw_regs(regs), so EFLAGS/FIXED
has to be unset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The layout of bits within the individual tiles
(referred to as sectors in the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro)
changed for 8 and 16-bit surfaces starting in
Blackwell 2 GPUs (With the exception of GB10).
To denote the difference, extend the sector field
in the parametric format modifier definition used
to generate modifier values for NVIDIA hardware.
Without this change, it would be impossible to
differentiate the two layouts based on modifiers,
and as a result software could attempt to share
surfaces directly between pre-GB20x and GB20x
cards, resulting in corruption when the surface
was accessed on one of the GPUs after being
populated with content by the other.
Of note: This change causes the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro to
evaluate its "s" parameter twice, with the side
effects that entails. I surveyed all usage of the
modifier in the kernel and Mesa code, and that
does not appear to be problematic in any current
usage, but I thought it was worth calling out.
Fixes: 6cc6e08d4542 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-2-jajones@nvidia.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
|
Clang doesn't like that (1ULL<<(64)) overflows when initializing a
global scope variable, even if that part of the ternary isn't used when
n = 64. The same initialization can be done without warnings in function
scopes, and GCC doesn't mind either way.
The build failure that highlighted this was already fixed in a different
way [1], which also has detailed links to the Clang issues. However it's
not going to be long before the same thing happens again, so it's better
to fix the root cause.
Fix it by using GENMASK_ULL() which does exactly the same thing, is much
more readable anyway, and doesn't have a shift that overflows.
[1]: https://lore.kernel.org/all/20250918-mmp-pdma-simplify-dma-addressing-v1-1-5c2be2b85696@riscstar.com/
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251030-james-fix-dma_bit_mask-v1-1-ad1ce7cfab6e@linaro.org
|
|
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40fab ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL
solves. The uapi can also be slightly adjusted to accommodate future
extensions. Remove the feature for now, it'll be reworked for the next
release.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
|
|
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix blk-crypto reporting EIO when EINVAL is the correct error code
- Two bug fixes for the block zone support
- NVME pull request via Keith:
- Target side authentication fixup
- Peer-to-peer metadata fixup
- null_blk DMA alignment fix
* tag 'block-6.18-20251031' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
null_blk: set dma alignment to logical block size
blk-crypto: use BLK_STS_INVAL for alignment errors
block: make REQ_OP_ZONE_OPEN a write operation
block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL
nvme-pci: use blk_map_iter for p2p metadata
nvmet-auth: update sc_c in host response
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
- MGMT: Fix OOB access in parse_adv_monitor_pattern()
- hci_event: validate skb length for unknown CC opcode
* tag 'for-net-2025-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: MGMT: Fix OOB access in parse_adv_monitor_pattern()
Bluetooth: btrtl: Fix memory leak in rtlbt_parse_firmware_v2()
Bluetooth: hci_event: validate skb length for unknown CC opcode
====================
Link: https://patch.msgid.link/20251031170959.590470-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of new fixes:
- ath10k: revert a patch that had caused issues on some devices
- cfg80211/mac80211: use hrtimers for some things where the
precise timing matters
- zd1211rw: fix a long-standing potential leak
* tag 'wireless-2025-10-30' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: zd1211rw: fix potential memory leak in __zd_usb_enable_rx()
wifi: mac80211: use wiphy_hrtimer_work for csa.switch_work
wifi: mac80211: use wiphy_hrtimer_work for ml_reconf_work
wifi: mac80211: use wiphy_hrtimer_work for ttlm_work
wifi: cfg80211: add an hrtimer based delayed work item
Revert "wifi: ath10k: avoid unnecessary wait for service ready message"
====================
Link: https://patch.msgid.link/20251030104919.12871-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The build fails with llvm 21/22:
$ make LLVM=1 -j
...
LD vmlinux.o
GEN .vmlinux.objs
...
BTF .tmp_vmlinux1.btf.o
...
AS .tmp_vmlinux2.kallsyms.o
LD vmlinux.unstripped
BTFIDS vmlinux.unstripped
WARN: resolve_btfids: unresolved symbol migrate_enable
WARN: resolve_btfids: unresolved symbol migrate_disable
make[2]: *** [vmlinux.unstripped] Error 255
make[2]: *** Deleting file 'vmlinux.unstripped'
make[1]: *** [Makefile:1242: vmlinux] Error 2
make: *** [Makefile:248: __sub-make] Error 2
Two functions with identical names but different addresses are
considered ambiguous and removed by "pahole" from vmlinux BTF.
Later resolve_btfids warns since it cannot find them.
Commit 378b7708194f ("sched: Make migrate_{en,dis}able() inline") made
them inlineable in most places, but in vmlinux built with llvm 21 and 22
there are four symbols for migrate_{enable,disable}:
three static functions and one global function.
Fix the issue by marking migrate_{enable,disable} as always inline.
The alternative is to mark them as notrace/nokprobe which is more
drastic. Only bpf programs are prevented from attaching to these
functions. The rest of the tracing shouldn't be affected.
[note: Peter ok-ed the patch, Alexei rewrote commit log]
Fixes: 378b7708194f ("sched: Make migrate_{en,dis}able() inline")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Menglong Dong <menglong.dong@linux.dev>
Link: https://lore.kernel.org/r/20251029183646.3811774-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In the parse_adv_monitor_pattern() function, the value of
the 'length' variable is currently limited to HCI_MAX_EXT_AD_LENGTH(251).
The size of the 'value' array in the mgmt_adv_pattern structure is 31.
If the value of 'pattern[i].length' is set in the user space
and exceeds 31, the 'patterns[i].value' array can be accessed
out of bound when copied.
Increasing the size of the 'value' array in
the 'mgmt_adv_pattern' structure will break the userspace.
Considering this, and to avoid OOB access revert the limits for 'offset'
and 'length' back to the value of HCI_MAX_AD_LENGTH.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: db08722fc7d4 ("Bluetooth: hci_core: Fix missing instances using HCI_MAX_AD_LENGTH")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"ufs driver plus two core fixes.
One core fix makes the unit attention counters atomic (just in case
multiple commands detect them) and the other is fixing a merge window
regression caused by changes in the block tree"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Fix the unit attention counter implementation
scsi: ufs: core: Declare tx_lanes witout initialization
scsi: ufs: core: Initialize value of an attribute returned by uic cmd
scsi: ufs: core: Fix error handler host_sem issue
scsi: core: Fix a regression triggered by scsi_host_busy()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- atyfb: Avoid hard lock up when PLL not initialized (Daniel Palmer)
- pvr2fb: Fix build error when CONFIG_PVR2_DMA enabled (Florian Fuchs)
- bitblit: Fix out-of-bounds read in bit_putcs* (Junjie Cao)
- valkyriefb: Fix reference count leak (Miaoqian Lin)
- fbcon: Fix slab-use-after-free in fb_mode_is_equal (Quanmin Yan)
- fb.h: Fix typo in "vertical" (Piyush Choudhary)
* tag 'fbdev-for-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: atyfb: Check if pll_ops->init_pll failed
fbcon: Set fb_display[i]->mode to NULL when the mode is released
fbdev: bitblit: bound-check glyph index in bit_putcs*
fbdev: pvr2fb: Fix leftover reference to ONCHIP_NR_DMA_CHANNELS
fbdev: valkyriefb: Fix reference count leak in valkyriefb_init
video: fb: Fix typo in comment in fb.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
ufshcd_link_startup() has a facility (link_startup_again) to issue
DME_LINKSTARTUP a 2nd time even though the 1st time was successful.
Some older hardware benefits from that, however the behaviour is
non-standard, and has been found to cause link startup to be unreliable
for some Intel Alder Lake based host controllers.
Add UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE to suppress
link_startup_again, in preparation for setting the quirk for affected
controllers.
Fixes: 7dc9fb47bc9a ("scsi: ufs: ufs-pci: Add support for Intel ADL")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251024085918.31825-3-adrian.hunter@intel.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When building drivers/net/ethernet/intel/idpf/xsk.c for ARCH=arm with
CONFIG_CFI=y using a version of LLVM prior to 22.0.0, there is a
BUILD_BUG_ON failure:
$ cat arch/arm/configs/repro.config
CONFIG_BPF_SYSCALL=y
CONFIG_CFI=y
CONFIG_IDPF=y
CONFIG_XDP_SOCKETS=y
$ make -skj"$(nproc)" ARCH=arm LLVM=1 clean defconfig repro.config drivers/net/ethernet/intel/idpf/xsk.o
In file included from drivers/net/ethernet/intel/idpf/xsk.c:4:
include/net/libeth/xsk.h:205:2: error: call to '__compiletime_assert_728' declared with 'error' attribute: BUILD_BUG_ON failed: !__builtin_constant_p(tmo == libeth_xsktmo)
205 | BUILD_BUG_ON(!__builtin_constant_p(tmo == libeth_xsktmo));
| ^
...
libeth_xdp_tx_xmit_bulk() indirectly calls libeth_xsk_xmit_fill_buf()
but these functions are marked as __always_inline so that the compiler
can turn these indirect calls into direct ones and see that the tmo
parameter to __libeth_xsk_xmit_fill_buf_md() is ultimately libeth_xsktmo
from idpf_xsk_xmit().
Unfortunately, the generic kCFI pass in LLVM expands the kCFI bundles
from the indirect calls in libeth_xdp_tx_xmit_bulk() in such a way that
later optimizations cannot turn these calls into direct ones, making the
BUILD_BUG_ON fail because it cannot be proved at compile time that tmo
is libeth_xsktmo.
Disable the generic kCFI pass for libeth_xdp_tx_xmit_bulk() to ensure
these indirect calls can always be turned into direct calls to avoid
this error.
Closes: https://github.com/ClangBuiltLinux/linux/issues/2124
Fixes: 9705d6552f58 ("idpf: implement Rx path for AF_XDP")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-3-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
There are two different ways that LLVM can expand kCFI operand bundles
in LLVM IR: generically in the middle end or using an architecture
specific sequence when lowering LLVM IR to machine code in the backend.
The generic pass allows any architecture to take advantage of kCFI but
the expansion of these bundles in the middle end can mess with
optimizations that may turn indirect calls into direct calls when the
call target is known at compile time, such as after inlining.
Add __nocfi_generic, dependent on an architecture selecting
CONFIG_ARCH_USES_CFI_GENERIC_LLVM_PASS, to disable kCFI bundle
generation in functions where only the generic kCFI pass may cause
problems.
Link: https://github.com/ClangBuiltLinux/linux/issues/2124
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251025-idpf-fix-arm-kcfi-build-error-v1-1-ec57221153ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
When a netdev issues a RX async resync request for a TLS connection,
the TLS module handles it by logging record headers and attempting to
match them to the tcp_sn provided by the device. If a match is found,
the TLS module approves the tcp_sn for resynchronization.
While waiting for a device response, the TLS module also increments
rcd_delta each time a new TLS record is received, tracking the distance
from the original resync request.
However, if the device response is delayed or fails (e.g due to
unstable connection and device getting out of tracking, hardware
errors, resource exhaustion etc.), the TLS module keeps logging and
incrementing, which can lead to a WARN() when rcd_delta exceeds the
threshold.
To address this, introduce tls_offload_rx_resync_async_request_cancel()
to explicitly cancel resync requests when a device response failure is
detected. Call this helper also as a final safeguard when rcd_delta
crosses its threshold, as reaching this point implies that earlier
cancellation did not occur.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update tls_offload_rx_resync_async_request_start() and
tls_offload_rx_resync_async_request_end() to get a struct
tls_offload_resync_async parameter directly, rather than
extracting it from struct sock.
This change aligns the function signatures with the upcoming
tls_offload_rx_resync_async_request_cancel() helper, which
will be introduced in a subsequent patch.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761508983-937977-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
