| Age | Commit message (Collapse) | Author |
|---|
|
Add ACOMP_REQUEST_ALLOC which is a wrapper around acomp_request_alloc
that falls back to a synchronous stack reqeust if the allocation
fails.
Also add ACOMP_REQUEST_ON_STACK which stores the request on the stack
only.
The request should be freed with acomp_request_free.
Finally add acomp_request_alloc_extra which gives the user extra
memory to use in conjunction with the request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove the unused dst_free hook.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As the only user of acomp/scomp uses a trivial single-page SG
list, remove support for everything else in preprataion for the
addition of virtual address support.
However, keep support for non-trivial source SG lists as that
user is currently jumping through hoops in order to linearise
the source data.
Limit the source SG linearisation buffer to a single page as
that user never goes over that. The only other potential user
is also unlikely to exceed that (IPComp) and it can easily do
its own linearisation if necessary.
Also keep the destination SG linearisation for IPComp.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Curiously, the Crypto API scatterwalk incremented pages by hand
rather than using nth_page. Possibly because scatterwalk predates
nth_page (the following commit is from the history tree):
commit 3957f2b34960d85b63e814262a8be7d5ad91444d
Author: James Morris <jmorris@intercode.com.au>
Date: Sun Feb 2 07:35:32 2003 -0800
[CRYPTO]: in/out scatterlist support for ciphers.
Fix this by using nth_page.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add kmap_local support to the scatterlist iterator. Use it for
all the helper functions in lib/scatterlist.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Now that the address returned by scatterwalk_map() is always being
stored into the same struct scatter_walk that is passed in, make
scatterwalk_map() do so itself and return void.
Similarly, now that scatterwalk_unmap() is always being passed the
address field within a struct scatter_walk, make scatterwalk_unmap()
take a pointer to struct scatter_walk instead of the address directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds request chaining and virtual address support to the
acomp interface.
It is identical to the ahash interface, except that a new flag
CRYPTO_ACOMP_REQ_NONDMA has been added to indicate that the
virtual addresses are not suitable for DMA. This is because
all existing and potential acomp users can provide memory that
is suitable for DMA so there is no need for a fall-back copy
path.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than allocating the stream memory in the request object,
move it into a per-cpu buffer managed by scomp. This takes the
stress off the user from having to manage large request objects
and setting up their own per-cpu buffers in order to do so.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The tfm argument is completely unused and meaningless as the
same stream object is identical over all transforms of a given
algorithm. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Mark the src.virt.addr field in struct skcipher_walk as a pointer
to const data. This guarantees that the user won't modify the data
which should be done through dst.virt.addr to ensure that flushing
is done when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Reuse the addr field from struct scatter_walk for skcipher_walk.
Keep the existing virt.addr fields but make them const for the
user to access the mapped address.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add memcpy_sglist which copies one SG list to another.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Rather than returning the address and storing the length into an
argument pointer, add an address field to the walk struct and use
that to store the address. The length is returned directly.
Change the done functions to use this stored address instead of
getting them from the caller.
Split the address into two using a union. The user should only
access the const version so that it is never changed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Additions to the error enum after explicit 0x27 setting for
SEV_RET_INVALID_KEY leads to incorrect value assignments.
Use explicit values to match the manufacturer specifications more
clearly.
Fixes: 3a45dc2b419e ("crypto: ccp: Define the SEV-SNP commands")
CC: stable@vger.kernel.org
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
async_xor_val has been unused since commit
a7c224a820c3 ("md/raid5: convert to new xor compution interface")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The acomp request flags field duplicates the base request flags
and is confusing. Remove it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Unlike the decompression code, the compression code in LZO never
checked for output overruns. It instead assumes that the caller
always provides enough buffer space, disregarding the buffer length
provided by the caller.
Add a safe compression interface that checks for the end of buffer
before each write. Use the safe interface in crypto/lzo.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Move the definition of struct crypto_type into internal.h as it
is only used by API implementors and not algorithm implementors.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Implement the camellia128-cts-cmac and camellia256-cts-cmac enctypes from
rfc6803.
Note that the test vectors in rfc6803 for encryption are incomplete,
lacking the key usage number needed to derive Ke and Ki, and there are
errata for this:
https://www.rfc-editor.org/errata_search.php?rfc=6803
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Implement the aes128-cts-hmac-sha256-128 and aes256-cts-hmac-sha384-192
enctypes from rfc8009, overriding the rfc3961 kerberos 5 simplified crypto
scheme.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Provide key derivation interface functions and a helper to implement the
PRF+ function from rfc4402.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Add an API by which users of the krb5 crypto library can perform crypto
requests, such as encrypt, decrypt, get_mic and verify_mic. These
functions take the previously prepared crypto objects to work on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Add an API by which users of the krb5 crypto library can get an allocated
and keyed crypto object.
For encryption-mode operation, an AEAD object is returned; for
checksum-mode operation, a synchronous hash object is returned.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Provide some functions to allow the called to find out about the layout of
the crypto section:
(1) Calculate, for a given size of data, how big a buffer will be
required to hold it and where the data will be within it.
(2) Calculate, for an amount of buffer, what's the maximum size of data
that will fit therein, and where it will start.
(3) Determine where the data will be in a received message.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Provide core structures, an encoding-type registry and basic module and
config bits for a generic Kerberos crypto library.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Add an AEAD template that does hash-then-cipher (unlike authenc that does
cipher-then-hash). This is required for a number of Kerberos 5 encoding
types.
[!] Note that the net/sunrpc/auth_gss/ implementation gets a pair of
ciphers, one non-CTS and one CTS, using the former to do all the aligned
blocks and the latter to do the last two blocks if they aren't also
aligned. It may be necessary to do this here too for performance reasons -
but there are considerations both ways:
(1) firstly, there is an optimised assembly version of cts(cbc(aes)) on
x86_64 that should be used instead of having two ciphers;
(2) secondly, none of the hardware offload drivers seem to offer CTS
support (Intel QAT does not, for instance).
However, I don't know if it's possible to query the crypto API to find out
whether there's an optimised CTS algorithm available.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Add some constants from the sunrpc headers.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: "David S. Miller" <davem@davemloft.net>
cc: Chuck Lever <chuck.lever@oracle.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: netdev@vger.kernel.org
|
|
Rather than accessing 'alg' directly to avoid the aliasing issue
which leads to unnecessary reloads, use the __restrict keyword
to explicitly tell the compiler that there is no aliasing.
This generates equivalent if not superior code on x86 with gcc 12.
Note that in skcipher_walk_virt the alg assignment is moved after
might_sleep_if because that function is a compiler barrier and
forces a reload.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When !HIGHMEM, the kmap_local_page() in the scatterlist walker does not
actually map anything, and the address it returns is just the address
from the kernel's direct map, where each sg entry's data is virtually
contiguous. To improve performance, stop unnecessarily clamping data
segments to page boundaries in this case.
For now, still limit segments to PAGE_SIZE. This is needed to prevent
preemption from being disabled for too long when SIMD is used, and to
support the alignmask case which still uses a page-sized bounce buffer.
Even so, this change still helps a lot in cases where messages cross a
page boundary. For example, testing IPsec with AES-GCM on x86_64, the
messages are 1424 bytes which is less than PAGE_SIZE, but on the Rx side
over a third cross a page boundary. These ended up being processed in
three parts, with the middle part going through skcipher_next_slow which
uses a 16-byte bounce buffer. That was causing a significant amount of
overhead which unnecessarily reduced the performance benefit of the new
x86_64 AES-GCM assembly code. This change solves the problem; all these
messages now get passed to the assembly code in one part.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Remove various functions that are no longer used.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a function that creates a scatterlist that represents the remaining
data in a walk. This will be used to replace chain_to_walk() in
net/tls/tls_device_fallback.c so that it will no longer need to reach
into the internals of struct scatter_walk.
Cc: Boris Pismenny <borisp@nvidia.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add memcpy_from_sglist() and memcpy_to_sglist() which are more readable
versions of scatterwalk_map_and_copy() with the 'out' argument 0 and 1
respectively. They follow the same argument order as memcpy_from_page()
and memcpy_to_page() from <linux/highmem.h>. Note that in the case of
memcpy_from_sglist(), this also happens to be the same argument order
that scatterwalk_map_and_copy() uses.
The new code is also faster, mainly because it builds the scatter_walk
directly without creating a temporary scatterlist. E.g., a 20%
performance improvement is seen for copying the AES-GCM auth tag.
Make scatterwalk_map_and_copy() be a wrapper around memcpy_from_sglist()
and memcpy_to_sglist(). Callers of scatterwalk_map_and_copy() should be
updated to call memcpy_from_sglist() or memcpy_to_sglist() directly, but
there are a lot of them so they aren't all being updated right away.
Also add functions memcpy_from_scatterwalk() and memcpy_to_scatterwalk()
which are similar but operate on a scatter_walk instead of a
scatterlist. These will replace scatterwalk_copychunks() with the 'out'
argument 0 and 1 respectively. Their behavior differs slightly from
scatterwalk_copychunks() in that they automatically take care of
flushing the dcache when needed, making them easier to use.
scatterwalk_copychunks() itself is left unchanged for now. It will be
removed after its callers are updated to use other functions instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add scatterwalk_next() which consolidates scatterwalk_clamp() and
scatterwalk_map(). Also add scatterwalk_done_src() and
scatterwalk_done_dst() which consolidate scatterwalk_unmap(),
scatterwalk_advance(), and scatterwalk_done() or scatterwalk_pagedone().
A later patch will remove scatterwalk_done() and scatterwalk_pagedone().
The new code eliminates the error-prone 'more' parameter. Advancing to
the next sg entry now only happens just-in-time in scatterwalk_next().
The new code also pairs the dcache flush more closely with the actual
write, similar to memcpy_to_page(). Previously it was paired with
advancing to the next page. This is currently causing bugs where the
dcache flush is incorrectly being skipped, usually due to
scatterwalk_copychunks() being called without a following
scatterwalk_done(). The dcache flush may have been placed where it was
in order to not call flush_dcache_page() redundantly when visiting a
page more than once. However, that case is rare in practice, and most
architectures either do not implement flush_dcache_page() anyway or
implement it lazily where it just clears a page flag.
Another limitation of the old code was that by the time the flush
happened, there was no way to tell if more than one page needed to be
flushed. That has been sufficient because the code goes page by page,
but I would like to optimize that on !HIGHMEM platforms. The new code
makes this possible, and a later patch will implement this optimization.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add scatterwalk_skip() to skip the given number of bytes in a
scatter_walk. Previously support for skipping was provided through
scatterwalk_copychunks(..., 2) followed by scatterwalk_done(), which was
confusing and less efficient.
Also add scatterwalk_start_at_pos() which starts a scatter_walk at the
given position, equivalent to scatterwalk_start() + scatterwalk_skip().
This addresses another common need in a more streamlined way.
Later patches will convert various users to use these functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The scatterwalk_* functions are designed to advance to the next sg entry
only when there is more data from the request to process. Compared to
the alternative of advancing after each step if !sg_is_last(sg), this
has the advantage that it doesn't cause problems if users accidentally
don't terminate their scatterlist with the end marker (which is an easy
mistake to make, and there are examples of this).
Currently, the advance to the next sg entry happens in
scatterwalk_done(), which is called after each "step" of the walk. It
requires the caller to pass in a boolean 'more' that indicates whether
there is more data. This works when the caller immediately knows
whether there is more data, though it adds some complexity. However in
the case of scatterwalk_copychunks() it's not immediately known whether
there is more data, so the call to scatterwalk_done() has to happen
higher up the stack. This is error-prone, and indeed the needed call to
scatterwalk_done() is not always made, e.g. scatterwalk_copychunks() is
sometimes called multiple times in a row. This causes a zero-length
step to get added in some cases, which is unexpected and seems to work
only by accident.
This patch begins the switch to a less error-prone approach where the
advance to the next sg entry happens just in time instead. For now,
that means just doing the advance in scatterwalk_clamp() if it's needed
there. Initially this is redundant, but it's needed to keep the tree in
a working state as later patches change things to the final state.
Later patches will similarly move the dcache flushing logic out of
scatterwalk_done() and then remove scatterwalk_done() entirely.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a reqsize field to struct ahash_alg and use it to set the
default reqsize so that algorithms with a static reqsize are
not forced to create an init_tfm function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds virtual address support to ahash. Virtual addresses
were previously only supported through shash. The user may choose
to use virtual addresses with ahash by calling ahash_request_set_virt
instead of ahash_request_set_crypt.
The API will take care of translating this to an SG list if necessary,
unless the algorithm declares that it supports chaining. Therefore
in order for an ahash algorithm to support chaining, it must also
support virtual addresses directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This adds request chaining to the ahash interface. Request chaining
allows multiple requests to be submitted in one shot. An algorithm
can elect to receive chained requests by setting the flag
CRYPTO_ALG_REQ_CHAIN. If this bit is not set, the API will break
up chained requests and submit them one-by-one.
A new err field is added to struct crypto_async_request to record
the return value for each individual request.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As unaligned operations are supported by the underlying algorithm,
ahash_save_req and ahash_restore_req can be greatly simplified to
only preserve the callback and data.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Set the request tfm directly in SYNC_SKCIPHER_REQUEST_ON_STACK since
the tfm is already available.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When TF-A is used to assert/deassert the resets through SCMI, the
IDs communicated to it are different than the ones mainline Linux uses.
Import the list of SCMI reset IDs from mainline TF-A so that devicetrees
can use these IDs more easily.
Co-developed-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Signed-off-by: XiaoDong Huang <derrick.huang@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Herbert notes that DIV_ROUND_UP() may overflow unnecessarily if an ecdsa
implementation's ->key_size() callback returns an unusually large value.
Herbert instead suggests (for a division by 8):
X / 8 + !!(X & 7)
Based on this formula, introduce a generic DIV_ROUND_UP_POW2() macro and
use it in lieu of DIV_ROUND_UP() for ->key_size() return values.
Additionally, use the macro in ecc_digits_from_bytes(), whose "nbytes"
parameter is a ->key_size() return value in some instances, or a
user-specified ASN.1 length in the case of ecdsa_get_signature_rs().
Link: https://lore.kernel.org/r/Z3iElsILmoSu6FuC@gondor.apana.org.au/
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The callers of crypto_sig_sign() assume that the signature size is
always equivalent to the key size.
This happens to be true for RSA, which is currently the only algorithm
implementing the ->sign() callback. But it is false e.g. for X9.62
encoded ECDSA signatures because they have variable length.
Prepare for addition of a ->sign() callback to such algorithms by
letting the callback return the signature size (or a negative integer
on error). When testing the ->sign() callback in test_sig_one(),
use crypto_sig_maxsize() instead of crypto_sig_keysize() to verify that
the test vector's signature does not exceed an algorithm's maximum
signature size.
There has been a relatively recent effort to upstream ECDSA signature
generation support which may benefit from this change:
https://lore.kernel.org/linux-crypto/20220908200036.2034-1-ignat@cloudflare.com/
However the main motivation for this commit is to reduce the number of
crypto_sig_keysize() callers: This function is about to be changed to
return the size in bits instead of bytes and that will require amending
most callers to divide the return value by 8.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend guard APIs with missing raw/spinlock_bh variants.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull misc vfs cleanups from Al Viro:
"Two unrelated patches - one is a removal of long-obsolete include in
overlayfs (it used to need fs/internal.h, but the extern it wanted has
been moved back to include/linux/namei.h) and another introduces
convenience helper constructing struct qstr by a NUL-terminated
string"
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add a string-to-qstr constructor
fs/overlayfs/namei.c: get rid of include ../internal.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 8 are cc:stable and the remainder address post-6.13
issues. 13 are for MM and 8 are for non-MM.
All are singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-02-01-03-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
MAINTAINERS: include linux-mm for xarray maintenance
revert "xarray: port tests to kunit"
MAINTAINERS: add lib/test_xarray.c
mailmap, MAINTAINERS, docs: update Carlos's email address
mm/hugetlb: fix hugepage allocation for interleaved memory nodes
mm: gup: fix infinite loop within __get_longterm_locked
mm, swap: fix reclaim offset calculation error during allocation
.mailmap: update email address for Christopher Obbard
kfence: skip __GFP_THISNODE allocations on NUMA systems
nilfs2: fix possible int overflows in nilfs_fiemap()
mm: compaction: use the proper flag to determine watermarks
kernel: be more careful about dup_mmap() failures and uprobe registering
mm/fake-numa: handle cases with no SRAT info
mm: kmemleak: fix upper boundary check for physical address objects
mailmap: add an entry for Hamza Mahfooz
MAINTAINERS: mailmap: update Yosry Ahmed's email address
scripts/gdb: fix aarch64 userspace detection in get_current_task
mm/vmscan: accumulate nr_demoted for accurate demotion statistics
ocfs2: fix incorrect CPU endianness conversion causing mount failure
mm/zsmalloc: add __maybe_unused attribute for is_first_zpdesc()
...
|
|
This fixes the following hard lockup in isolate_lru_folios() during memory
reclaim. If the LRU mostly contains ineligible folios this may trigger
watchdog.
watchdog: Watchdog detected hard LOCKUP on cpu 173
RIP: 0010:native_queued_spin_lock_slowpath+0x255/0x2a0
Call Trace:
_raw_spin_lock_irqsave+0x31/0x40
folio_lruvec_lock_irqsave+0x5f/0x90
folio_batch_move_lru+0x91/0x150
lru_add_drain_per_cpu+0x1c/0x40
process_one_work+0x17d/0x350
worker_thread+0x27b/0x3a0
kthread+0xe8/0x120
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1b/0x30
lruvec->lru_lock owner：
PID: 2865 TASK: ffff888139214d40 CPU: 40 COMMAND: "kswapd0"
#0 [fffffe0000945e60] crash_nmi_callback at ffffffffa567a555
#1 [fffffe0000945e68] nmi_handle at ffffffffa563b171
#2 [fffffe0000945eb0] default_do_nmi at ffffffffa6575920
#3 [fffffe0000945ed0] exc_nmi at ffffffffa6575af4
#4 [fffffe0000945ef0] end_repeat_nmi at ffffffffa6601dde
[exception RIP: isolate_lru_folios+403]
RIP: ffffffffa597df53 RSP: ffffc90006fb7c28 RFLAGS: 00000002
RAX: 0000000000000001 RBX: ffffc90006fb7c60 RCX: ffffea04a2196f88
RDX: ffffc90006fb7c60 RSI: ffffc90006fb7c60 RDI: ffffea04a2197048
RBP: ffff88812cbd3010 R8: ffffea04a2197008 R9: 0000000000000001
R10: 0000000000000000 R11: 0000000000000001 R12: ffffea04a2197008
R13: ffffea04a2197048 R14: ffffc90006fb7de8 R15: 0000000003e3e937
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
<NMI exception stack>
#5 [ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
#6 [ffffc90006fb7cf8] shrink_active_list at ffffffffa597f788
#7 [ffffc90006fb7da8] balance_pgdat at ffffffffa5986db0
#8 [ffffc90006fb7ec0] kswapd at ffffffffa5987354
#9 [ffffc90006fb7ef8] kthread at ffffffffa5748238
crash>
Scenario:
User processe are requesting a large amount of memory and keep page active.
Then a module continuously requests memory from ZONE_DMA32 area.
Memory reclaim will be triggered due to ZONE_DMA32 watermark alarm reached.
However pages in the LRU(active_anon) list are mostly from
the ZONE_NORMAL area.
Reproduce:
Terminal 1: Construct to continuously increase pages active(anon).
mkdir /tmp/memory
mount -t tmpfs -o size=1024000M tmpfs /tmp/memory
dd if=/dev/zero of=/tmp/memory/block bs=4M
tail /tmp/memory/block
Terminal 2:
vmstat -a 1
active will increase.
procs ---memory--- ---swap-- ---io---- -system-- ---cpu--- ...
r b swpd free inact active si so bi bo
1 0 0 1445623076 45898836 83646008 0 0 0
1 0 0 1445623076 43450228 86094616 0 0 0
1 0 0 1445623076 41003480 88541364 0 0 0
1 0 0 1445623076 38557088 90987756 0 0 0
1 0 0 1445623076 36109688 93435156 0 0 0
1 0 0 1445619552 33663256 95881632 0 0 0
1 0 0 1445619804 31217140 98327792 0 0 0
1 0 0 1445619804 28769988 100774944 0 0 0
1 0 0 1445619804 26322348 103222584 0 0 0
1 0 0 1445619804 23875592 105669340 0 0 0
cat /proc/meminfo | head
Active(anon) increase.
MemTotal: 1579941036 kB
MemFree: 1445618500 kB
MemAvailable: 1453013224 kB
Buffers: 6516 kB
Cached: 128653956 kB
SwapCached: 0 kB
Active: 118110812 kB
Inactive: 11436620 kB
Active(anon): 115345744 kB
Inactive(anon): 945292 kB
When the Active(anon) is 115345744 kB, insmod module triggers
the ZONE_DMA32 watermark.
perf record -e vmscan:mm_vmscan_lru_isolate -aR
perf script
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=2
nr_skipped=2 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=1 nr_requested=32 nr_scanned=28835844
nr_skipped=28835844 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=29
nr_skipped=29 nr_taken=0 lru=active_anon
isolate_mode=0 classzone=1 order=0 nr_requested=32 nr_scanned=0
nr_skipped=0 nr_taken=0 lru=active_anon
See nr_scanned=28835844.
28835844 * 4k = 115343376KB approximately equal to 115345744 kB.
If increase Active(anon) to 1000G then insmod module triggers
the ZONE_DMA32 watermark. hard lockup will occur.
In my device nr_scanned = 0000000003e3e937 when hard lockup.
Convert to memory size 0x0000000003e3e937 * 4KB = 261072092 KB.
[ffffc90006fb7c28] isolate_lru_folios at ffffffffa597df53
ffffc90006fb7c30: 0000000000000020 0000000000000000
ffffc90006fb7c40: ffffc90006fb7d40 ffff88812cbd3000
ffffc90006fb7c50: ffffc90006fb7d30 0000000106fb7de8
ffffc90006fb7c60: ffffea04a2197008 ffffea0006ed4a48
ffffc90006fb7c70: 0000000000000000 0000000000000000
ffffc90006fb7c80: 0000000000000000 0000000000000000
ffffc90006fb7c90: 0000000000000000 0000000000000000
ffffc90006fb7ca0: 0000000000000000 0000000003e3e937
ffffc90006fb7cb0: 0000000000000000 0000000000000000
ffffc90006fb7cc0: 8d7c0b56b7874b00 ffff88812cbd3000
About the Fixes:
Why did it take eight years to be discovered?
The problem requires the following conditions to occur:
1. The device memory should be large enough.
2. Pages in the LRU(active_anon) list are mostly from the ZONE_NORMAL area.
3. The memory in ZONE_DMA32 needs to reach the watermark.
If the memory is not large enough, or if the usage design of ZONE_DMA32
area memory is reasonable, this problem is difficult to detect.
notes:
The problem is most likely to occur in ZONE_DMA32 and ZONE_NORMAL,
but other suitable scenarios may also trigger the problem.
Link: https://lkml.kernel.org/r/20241119060842.274072-1-liuye@kylinos.cn
Fixes: b2e18757f2c9 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: liuye <liuye@kylinos.cn>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support multiple hook locations for maint scripts of Debian package
- Remove 'cpio' from the build tool requirement
- Introduce gendwarfksyms tool, which computes CRCs for export symbols
based on the DWARF information
- Support CONFIG_MODVERSIONS for Rust
- Resolve all conflicts in the genksyms parser
- Fix several syntax errors in genksyms
* tag 'kbuild-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (64 commits)
kbuild: fix Clang LTO with CONFIG_OBJTOOL=n
kbuild: Strip runtime const RELA sections correctly
kconfig: fix memory leak in sym_warn_unmet_dep()
kconfig: fix file name in warnings when loading KCONFIG_DEFCONFIG_LIST
genksyms: fix syntax error for attribute before init-declarator
genksyms: fix syntax error for builtin (u)int*x*_t types
genksyms: fix syntax error for attribute after 'union'
genksyms: fix syntax error for attribute after 'struct'
genksyms: fix syntax error for attribute after abstact_declarator
genksyms: fix syntax error for attribute before nested_declarator
genksyms: fix syntax error for attribute before abstract_declarator
genksyms: decouple ATTRIBUTE_PHRASE from type-qualifier
genksyms: record attributes consistently for init-declarator
genksyms: restrict direct-declarator to take one parameter-type-list
genksyms: restrict direct-abstract-declarator to take one parameter-type-list
genksyms: remove Makefile hack
genksyms: fix last 3 shift/reduce conflicts
genksyms: fix 6 shift/reduce conflicts and 5 reduce/reduce conflicts
genksyms: reduce type_qualifier directly to decl_specifier
genksyms: rename cvar_qualifier to type_qualifier
...
|
|
Pull more block updates from Jens Axboe:
- MD pull request via Song:
- Fix a md-cluster regression introduced
- More sysfs race fixes
- Mark anything inside queue freezing as not being able to do IO for
memory allocations
- Fix for a regression introduced in loop in this merge window
- Fix for a regression in queue mapping setups introduced in this merge
window
- Fix for the block dio fops attempting an iov_iter revert upton
getting -EIOCBQUEUED on the read side. This one is going to stable as
well
* tag 'block-6.14-20250131' of git://git.kernel.dk/linux:
block: force noio scope in blk_mq_freeze_queue
block: fix nr_hw_queue update racing with disk addition/removal
block: get rid of request queue ->sysfs_dir_lock
loop: don't clear LO_FLAGS_PARTSCAN on LOOP_SET_STATUS{,64}
md/md-bitmap: Synchronize bitmap_get_stats() with bitmap lifetime
blk-mq: create correct map for fallback case
block: don't revert iter for -EIOCBQUEUED
|
