| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Allow virtio rpmsg to use separate transmit and receive buffer counts
based on the vring sizes, and obtain buffer sizes from virtio config
space when the feature is negotiated. Document the configuration and
report the MTU in the sample driver.
- Fix signal interruption and timeout handling while waiting for a
virtio transmit buffer. Release the device tree node reference on
MediaTek channel teardown.
- Convert the rpmsg control ioctl comments to kernel-doc format.
* tag 'rpmsg-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: virtio: fix error handling in TX buffer wait
rpmsg: mtk: release channel OF node on device teardown
samples: rpmsg: Fix mtu printk specifiers
samples: rpmsg: Add MTU size info
docs: rpmsg: Add virtio config space details
rpmsg: virtio_rpmsg_bus: Get buffer size from config space
rpmsg: virtio_rpmsg_bus: Allow different size of tx and rx bufs
rpmsg: virtio_rpmsg_bus: Rename rbufs and sbufs
rpmsg: ctrl: use kernel-doc format for ioctl macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Add Qualcomm QMI Thermal Mitigation Device support for PAS-managed
remote processors, with cooling device bindings and configurations
for Hamoa, Kodiak, Lemans, Talos, Monaco, and Shikra CDSP and modem
subsystems as applicable.
- Add per-power-domain proxy performance states for Hawi CDSP and
update Hawi, Maili, and SDX75 PAS compatible bindings and the SDX75
device tree. Correct the Qualcomm ADSP startup timeout.
- Fetch auto-boot firmware only once and synchronize boot work with
device removal. Bound ELF section header accesses, improve trace
diagnostics, and update coredump configuration documentation.
- Set 48-bit DMA masks for TI K3 DSP and R5 remote processors, correct
mailbox message types, and enable compile testing for more TI
drivers. Fix i.MX address range boundary checks and DSP runtime PM
ordering, and simplify mailbox notification handling.
- Harden Xilinx mailbox setup and teardown and avoid sending
notifications when the transmit queue is full. Propagate STM32
optional IRQ lookup errors and correct the MediaTek MT8188 SCP
register binding.
* tag 'rproc-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (33 commits)
remoteproc: qcom_q6v5_pas: Add QMI TMD cooling support for Shikra
remoteproc: virtio: Remove stray white space
remoteproc: virtio: Replace kmemdup with kmemdup_array
remoteproc: virtio: Add vdev_to_rsc() helper
remoteproc: core: Fetch the auto-boot firmware only once
remoteproc: xlnx: fix typecast warnings
remoteproc: qcom_q6v5_pas: enable QMI TMD cooling support
remoteproc: qcom: pas: add support for TMD thermal cooling devices
soc: qcom: Add QMI TMD support for remote thermal mitigation
dt-bindings: remoteproc: qcom,pas: add #cooling-cells property
remoteproc: qcom_q6v5_pas: add per-PD proxy performance states for Hawi CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: make qcom,hawi-cdsp-pas standalone
arm64: dts: qcom: sdx75: Use SM8650 MPSS as fallback compatible
dt-bindings: remoteproc: qcom,sm8550-pas: Make SDX75 MPSS fallback to SM8650
dt-bindings: remoteproc: qcom,sm8550-pas: Add Hawi and Maili MPSS as SM8650 fallback
dt-bindings: remoteproc: Fix MT8188 SCP regs
remoteproc: Use %p for pointer formatting
remoteproc: Add compile testing for additional TI drivers
remoteproc: k3-dsp: Fix usage of omap_mbox_message and mbox_msg_t
remoteproc: k3: Include what we need and only what we need
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull I3C updates from Alexandre Belloni:
"This introduces the I3C hub support in the core with drivers still
being worked on. Then we have the usual fixes and cleanups:
Subsystem:
- Add APIs for I3C hub support
- Restrict HDR modes to those supported by the bus and target
- Fix ACPI target enumeration on multi-instance controllers by
extracting the bus-controller instance number and PID from the
correct _ADR fields.
- allocate IBI workqueue with WQ_HIGHPRI
Drivers:
- dw: Synaptics sl2610 support
- mipi-i3c-hci: HDR-DDR support, cleanup and fixes"
* tag 'i3c/for-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
dt-bindings: i3c: Add Synaptics sl2610 i3c
i3c: dw: switch to array-based exclusive reset control
dt-bindings: i3c: dw: support up to two reset lines
i3c: hub: Add support for the I3C interface in the I3C hub
dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support
i3c: master: Add controller-only device operation helpers
i3c: master: Add APIs for I3C hub support
i3c: master: use named initializers for acpi_device_id
i3c: master: adi: free the IRQ before unregistering the master
i3c: master: amd: Report direct CCC read length in payload.actual_len
i3c: mipi-i3c-hci: Add HDR-DDR support
i3c: Restrict HDR modes to those supported by the bus and target
i3c: mipi-i3c-hci: Support configurable device NACK retries
i3c: mipi-i3c-hci: Remove invalid HDR-BT and Fm/Fm+ definitions
i3c: mipi-i3c-hci: Remove invalid transfer size limit
i3c: mipi-i3c-hci: Correct RESP_DATA_LENGTH to bits 15:0
i3c: mipi-i3c-hci: Stop rings gracefully when suspending
i3c: mipi-i3c-hci: Move DMA suspend/resume callbacks
i3c: mipi-i3c-hci: Process multiple IBIs per interrupt
i3c: mipi-i3c-hci: Fix runtime PM violation in i3c_hci_free_ibi()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce LOAD_SWITCH property
- pack power_supply_desc to optimize memory
- prevent power-supply device unregistration while callback runs
- drop last CONFIG_OF build-time dependencies from the core
- documentation fixes
Power-supply drivers:
- bq27xxx: add support for bq27z746, bq28z620
- ab8500: add AB8505 support
- bq257xx: fix probe time configuration race condition
- multiple: convert drivers with custom LOAD_SWITCH properties to the
new standard one
- cros_charge-control: restore EC state on resume
- qcom_battmgr: fix USB type reporting, notify charger online state,
report full batteries and correct capacity on X1E
- gpio-charger: always report as discharging if input power is
missing
- bq24190_charger: don't reset registers across system suspend
- qcom_smbx: a lot of independent fixes
- lots of error and module removal path fixes
- misc fixes
Reset drivers
- misc fixes"
* tag 'for-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (77 commits)
power: supply: gpio-charger: Report discharging without input power
power: supply: qcom_battmgr: report full batteries
power_supply: serialize property access with unregister
power: supply: bq257xx: Describe the dev field in the driver data structure
power: supply: qcom_battmgr: Notify charger supplies of online changes
power: supply: generic-adc-battery: fix status with no supplier
power: supply: qcom_battmgr: report the USB type from USB_ADAP_TYPE
power: supply: sysfs: Ratelimit "unavailable enum value" warning
power: supply: cros_charge-control: restore EC state on resume
power: supply: qcom_smbx: set the charge enable after software control
power: supply: generic-adc-battery: Propagate charged GPIO errors
power: supply: sbs-battery: disable polling before supply teardown
power: supply: pf1550: drain IRQ work before unregistering supplies
power: supply: bq256xx: Expose VBUS state through extcon
power: supply: ab8500_fg: Avoid reserved AB8505 CCConf bit
power: supply: ab8500_fg: Finalize current measurements
power: supply: ab8500_charger: Recover inactive AB8505 charger
power: supply: ab8500_charger: Retry AB8505 USB detection
power: supply: ab8500_charger: Skip absent AB8505 main charger
power: supply: ab8500_charger: Handle detection errors
...
|
|
A task other than the owner can free a request, io_ring_exit_work()
running the local task_work of a DEFER_TASKRUN ring for example, or
io_do_iopoll() reaping completions. io_put_task() then takes the else
branch:
percpu_counter_sub(&tctx->inflight, 1);
if (unlikely(atomic_read(&tctx->in_cancel)))
wake_up(&tctx->wait);
put_task_struct(tctx->task);
The first line is what lets the owner leave io_uring_cancel_generic(),
and on exec it frees the tctx right after. Nothing holds that off for
the remaining three lines, the task reference only covers a tctx freed
along with the task_struct. It used to work out because
io_uring_del_tctx_node() took the uring_lock that the freeing side holds
across io_put_task(), until that moved to tctx_lock.
Free the tctx with kfree_rcu(), and enter an RCU read section in
io_put_task() before the count is dropped.
Fixes: 5623eb1ed035 ("io_uring/tctx: add separate lock for list of tctx's in ctx")
Signed-off-by: Chris Mason <mason@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A reassembled skb retains the secpath from its first fragment, which
makes it possible for the final policy check to accept bytes that were
not covered by the transform recorded on the skb. This can affect IPsec
tunnel traffic, including AH and ESP, and allow a packet to be accepted
even though only part of its payload was authenticated.
Reject a fragment when its secpath differs from the fragments already
in the queue, and keep overlap statistics limited to actual overlaps.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Reviewed-by: Eric Dumazet <edumazet@kernel.org>
Signed-off-by: Dave Miller <davem@davem-thinkpadp1gen8.ibmlond.csb>
|
|
Add ntfs3 tracepoints for file I/O operations.
This adds trace events for ntfs_file_read_iter() and
ntfs_file_write_iter() to help observe file read and
write activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add ntfs3 tracepoints for iomap operations.
This adds trace events for ntfs_iomap_begin() and
ntfs_iomap_end() to help observe iomap mapping activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add ntfs3 tracepoints for allocation operations.
This adds trace events for attr_allocate_clusters(),
attr_set_size_ex(), and attr_data_get_block() to help
observe cluster allocation, size changes, and block
mapping activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add ntfs3 tracepoints for directory index operations.
This adds trace events for dir_search_u(), indx_find(),
indx_insert_entry(), and indx_delete_entry() to help observe
directory index lookup, insert, and delete activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add an ntfs3 tracepoint for inode creation.
This adds a trace event for ntfs_create_inode() to help
observe inode creation activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add ntfs3 tracepoints for namei operations.
This adds trace events for ntfs_lookup() and ntfs_rename()
to help observe directory lookup and rename activity.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
Add ntfs3 tracepoints for mount and log replay paths.
This adds trace events for ntfs_fill_super(), ntfs_init_from_boot(),
and log_replay() to help observe mount setup, boot sector parsing,
and $LogFile replay results.
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
After 'r3 = r8; r3 += 4' the verifier knows that r3 == r8 + 4. The two
registers have the same id, and r3 keeps the difference in reg->delta. When
the prog compares one of them with a constant, sync_linked_regs()
calculates the range of the other register from the difference of the two
deltas.
At a loop head scalar evolution widens a register: it replaces the register
with its range over all iterations. Then the register is not linked to
other registers. scratch_widened_reg_id() clears reg->id, but it does not
clear reg->delta. A subsequent copy of the register gets the stale delta.
Then the range of the copy is incorrect by this delta.
r3 = r8
r3 += 4 ; R3=scalar(id=1+4)
1: ; r3 is widened: no id, delta is still 4
r4 = r3 ; id=2 and delta 4 in both
r4 += 1 ; R4=scalar(id=2+1)
if r3 > 10 goto 3f ; R3 <= 10, R4 = R3 + 1 - 4 <= 7
if r4 <= 7 goto 2f
... ; not verified, r4 is up to 11 here
The verifier does not verify code that can run. Use clear_scalar_id(). It
clears id and delta together. Move it to bpf_verifier.h, so that scev.c can
call it.
Fixes: 6ccf49f79327 ("bpf: Use SCEV to widen bounded loops")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20261027190314.1440199-8-alexei.starovoitov@gmail.com
|
|
Rust has no address spaces. Thus a prog in Rust accesses arena through
scalars. With BPF_F_ARENA_SCALAR the verifier accepts each load and each
store through a scalar as an access to arena.
The verifier rewrites one insn at a time. Thus it must add one insn to each
access. The compiler knows the source of each pointer. It can emit one
addr_space_cast for each pointer, as it does for the __arena pointers of C.
flag: one move for each access cast: one cast for each pointer
ax = (u32)r1 r1 = addr_space_cast(r1, 0, 1)
r2 = *(u64 *)(ax + 0) r2 = *(u64 *)(r1 + 0)
ax = (u32)r1 r3 = *(u64 *)(r1 + 8)
r3 = *(u64 *)(ax + 8)
20 progs of rust-bpf, with the flag and with the casts that a prototype of
an LLVM pass emits:
flag casts
moves or casts 1568 571
insns 14864 13938
jited bytes 72351 69111
No released kernel has the flag. LLVM does not emit the casts for Rust at
this time. Until it does, Rust progs that access arena do not load.
scx_mavd and scx_nitosis set the flag too. They are experimental schedulers
in C in sched-ext/scx, and they use the flag to omit __arena. They must use
__arena again.
This reverts commit 4c651a91bdfc
("bpf: Treat load and store through a number as arena access"). One part
stays: BPF_REG_AX in reg2pt_regs[] of the x86 JIT. The fetching AND/OR/XOR
atomics in arena use it now.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20261027190314.1440199-6-alexei.starovoitov@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add "within" to filter logic
Add a way to trace events by what function they fall in.
echo 'within == "vfs_read" > events/sched/sched_switch/filter
Will only trigger sched_switch events that happen within the vfs_read
function. It uses a stacktrace at the event and checks if any entry
is within the specified function and if so, it prints the event.
- Remove a duplicate definition of ftrace_set_clr_event() from the
header
- Do not have ftrace_set_clr_event() modify its input buffer
Have the buffer passed into ftrace_set_clr_event() to be const char *
and not allow modifications to it that might cause side effects.
- Add kunit tests for ftrace_parse_event_string()
- Add filter argument to __ftrace_set_clr_event()
Make it possible to set a filter on an event at the same time it is
enabled.
- Add event filtering logic to the kernel command line
To allow filtering events on boot, allow filtering to be specified on
the kernel command line when enabling events.
- Rename "ring_buffer_size()" to "ring_buffer_capacity()"
"size" refers to how much is allocated whereas the actual return
value is the amount of available data in the ring buffer minus its
meta data.
- Rename "trace_array_entries" to "trace_array_capacity"
There's several functions that use "entries" and returns the amount
of data that that is usable. "entries" should be only for the number
of events, not the amount of data.
- Print the histogram "bucket" size as unsigned.
If a bucket size is LONG_MAX, then it shows up as a negative number.
- Show bucket size in output of histograms
The output of what the histogram is shown doesn't show the size of
the buckets when buckets are used. The output should be the same as
the input and since specifying buckets without a size is an invalid
command, the output to display what was entered should also show the
size.
- Fix stacktrace modifier output
Only show the stacktrace modifier when it was specified in creation.
- Unregister filed variable histograms when the command fails
If one histogram references a variable of another histogram it
registers that other histogram. But if the first histogram fails in
setup after it registered the other histogram it doesn't unregister
it. Have the first histogram add the reference to the other histogram
so the failure clean up will unregister the second histogram too.
- Fix 64-bit signed histogram fields on 32-bit kernels
A fix to convert char * to u64 with added casting also incorrectly
added an intermediate cast to convert a long value to u64 which ended
up truncating the upper 32 bits for 32-bit kernels. Remove the
intermediate typecast.
- Print signed histogram keys as signed
Histogram keys were being printed as unsigned and with signed keys it
was giving the wrong output.
- Use copy_from_user() and not __copy_from_user() in syscall tracing
The syscall tracing incorrectly was using __copy_from_user() which
could be an issue if the system trusts perf doing the trace.
- Take trace_types_lock when recording a new module in persistent
buffer
When a new module is loaded, the persistent ring buffer saves it in
its persistent memory. All the trace_arrays are iterated looking for
any persistent buffer to add the module to. But it did not hold the
trace_types_lock meaning a trace_array could be added or removed
while iterating the list.
- Only create tracepoint guest_halt_poll_ns when it is used
The tracepoint guest_halt_poll_ns is defined in the power management
code but it is only used when CONFIG_CPU_IDLE_GOV_HALTPOLL is
enabled. This wastes memory when that config isn't enabled so wrap
the tracepoint around that as well.
- Handle empty fields for events in trace_event_get_offsets()
The user events could have empty fields and this causes
trace_event_get_offsets() to crash as it expects events to always
have fields. Make the function handle events with no fields.
- Reject incomplete event filter expressions
If a filter has an incomplete expression (common_pid == 1111 || ), it
will cause a out-of-bounds bug. Have the predicate_parse() only
process the expression if it is complete.
* tag 'trace-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (27 commits)
tracing: Reject incomplete event filter expressions
tracing: Guard trace_event_get_offsets() against an empty fields list
cpuidle: haltpoll: Only define guest_halt_poll_ns tracepoint when used
tracing/osnoise: Add __printf attribute to osnoise_print()
tracing/histograms: Verify event_call identity when updating synth_event refcount
tracing: Save the event file instead of the compatible histogram
tracing: Hold trace_types_lock when resetting last boot data from readers
tracing: Hold trace_types_lock when updating modules in persistent instances
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
tracing: Print a signed histogram key as signed
tracing: Fix 64-bit and signed histogram fields on 32-bit kernels
tracing: Clamp the printed end of a histogram bucket at U64_MAX
tracing: Unregister field variable histograms when the command fails
tracing: Only report the stacktrace modifier on a real field
tracing: Add the bucket size to expr_field_str()
tracing: Print the bucket size as unsigned
tracing: Rename tracing_entries_fops to tracing_capacity_fops
tracing: Rename trace_array::entries to capacity
ring-buffer: Rename ring_buffer_size() to ring_buffer_capacity()
tracing: Parse filter from boot event string
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm: make VMA flag semantics explicit, eliminate VM_SPECIAL" (Lorenzo
Stoakes):
Replace VM_SPECIAL with helpers describing mapping ownership and
behavior. Enforce the mmap flag rules and convert affected drivers,
removing ambiguous tests shared by driver mappings and ordinary
memory.
- "support kselftest on nommu platform" (Hajime Tazaki):
Add opt-in mmap and mremap tests for NOMMU systems. Teach the runner
to avoid its fork-dependent timeout command and document the build
and runtime requirements.
- "mm/collapse: separate a collapse from its callers" (Kiryl
Shutsemau):
Separate huge-page collapse from caller policy. Replace khugepaged
identity checks with explicit permissions, and separate scanning from
collapse with the mmap_lock drop in one place.
- "mm: implement and use vma_has_anon_rmap(), silence KCSAN" (Lorenzo
Stoakes):
Provide a common helper for testing whether a VMA has anonymous
reverse mappings. Document the locking rules, annotate intentional
concurrent reads for KCSAN, and convert the core MM callers.
- "mm/sparse: remove SECTION_MARKED_PRESENT and further cleanups"
(David Hildenbrand):
Remove SECTION_MARKED_PRESENT in favor of the early-section flag.
Simplify sparse memory initialization, section metadata handling and
related PFN validity checks.
- "sh: remove NUMA and SPARSEMEM support" (Mike Rapoport):
Remove SuperH NUMA and SPARSEMEM support. The extra memory banks have
been unusable since the NO_BOOTMEM conversion, leaving only the code
and data overhead.
- "mm: Unify device DAX and HugeTLB vmemmap population paths" (Muchun
Song):
Unify the generic device DAX and HugeTLB vmemmap population paths and
shared tail-page handling. Remove the duplicate DAX machinery while
retaining the powerpc radix implementation.
- "kselftest: mm: fix some failure of split_huge_page_test" (Yeoreum
Yun):
Fix huge-page split tests racing with khugepaged recollapse. Use
pagemap and page flags instead of VMA-boundary assumptions which fail
when glibc has already enabled THP.
- "memcg: move memcgid refcount to objcg to unpin dying memcgs"
(Bingfang Guo):
Let dying memcgs be freed while swapped-out shmem still holds their
IDs. Move ID references to reparentable objcgs, with the necessary
swap accounting and RCU lifetime changes.
- "mm/truncate: fix data loss when truncating straddling large folios"
(Zhang Yi):
Preserve out-of-range data when truncating straddling large folios.
Fix a lookup race and split-failure handling, and handle minimum
folio orders for the forthcoming ext4 iomap buffered I/O path.
- "mm/damon: introduce damos quota goal target metric complement flag"
(SJ Park):
Let DAMOS quota goals use a metric's complement, so utilization can
also express free-memory goals without adding separate metrics. Add
the sysfs interface, documentation and tests.
- "arm64/mm: Standardize printing for pgtable entries" (Anshuman
Khandual):
Use the generic formatter for arm64 page-table entries, ready for
future wider entries. Move the safe-PTE-update check out of the
header to avoid an include cycle.
- "mm: kmsan: fix iounmap metadata teardown" (Dima Koziuk):
Fix KMSAN metadata leaks on iounmap and failed ioremap allocations.
Free backing pages before removing their mappings, and share the
teardown with partial-allocation cleanup.
- "mm/damon/core: preserve quota state when constructing schemes" (Karl
Mehltretter):
Preserve running DAMOS quota state while validating parameter
updates. Even rejected updates could reset accounting and exceed the
quota window; add tests for both accepted and rejected updates.
- "mm/vmalloc: fix vmalloc_dump_obj VA lookup" (Ye Liu):
Fix vmalloc_dump_obj() lookups for last-page addresses and
allocations spanning vmap zones. These allocations were being missed
in diagnostic output.
- "mm: various (urgent?) fixes" (David Hildenbrand):
Fix mmap charge leaks and hugetlb use-after-free, wrong-address
unmapping, stuck locks and endless faults. Also preserve reservations
on failed mremap and handle stale userfaultfd bits.
- "maple_tree: fix maple_range_64 crashes in RCU mode" (Dimitris
Charisis):
Fix pointer and metadata confusion during RCU destruction of
maple_range_64 nodes, avoiding double frees and invalid accesses. Add
a regression test; no in-tree user currently uses this combination.
- "mm: fix hugetlb NR_HUGETLB accounting on folio migration" (Hongfu
Li):
Fix hugetlb migration and preallocation accounting so /proc/vmstat
retains the correct count and memory.numa_stat follows the folio to
its new node.
- "mm/damon: fix a minor bug, clean code, and add a test" (SJ Park):
Fix 32-bit DAMON age overflow which made old regions look young.
Share hugetlb folio acquisition code and add a regression test for
the previously fixed last-region skipping bug.
- "mm/damon/core: cleanup code, reduce stack usage, and add kunit" (SJ
Park):
Reduce kdamond stack usage and remove unused enums. Add deterministic
PSI quota-goal tests which do not depend on the machine's current
memory pressure.
- "mm/damon: fix the temporal goal tuner's size quota conversion"
(Donggeun Yoo):
Bound the temporal tuner's quota conversion to prevent overflow and
zero effective quotas, which could stop schemes making progress. Add
boundary tests.
- "Don't use GFP_DMA when calling dma_alloc_coherent" (Baoquan He):
Remove redundant GFP_DMA flags from coherent DMA allocation calls.
The DMA API already selects the zone from device limits and ignores
the caller's flag.
- "kselftest: mm: fix intermittent failure khugepaged test" (Yeoreum
Yun):
Propagate child-process failures in the khugepaged tests and prevent
background collapse from racing their checks. This removes false
passes and intermittent failures.
- "MAINTAINERS: cover all hugetlb headers under HUGETLB SUBSYSTEM"
(Enze Li):
Cover all hugetlb headers in MAINTAINERS so get_maintainer.pl finds
the right maintainers. Also label the closing hugetlb_cgroup.h
include guard.
Summary of the 65 singletons in this merge:
The singletons include a few worthwhile performance fixes. Avoiding
unnecessary reverse-map tree updates gave a reported 15.9% improvement
in UnixBench's execl test on a 192-core x86 system. A reclaim retry
fix stops defrag_mode from spinning under memory.low protection; a
reported file-creation stress test ran 5.7 times faster, with far less
memory pressure. Narrower hugetlb invalidations also spare KVM guests
needless refaults: the reported Redis-in-VM P99 QPS penalty while
punching holes fell from 7.09% to 1.45%.
Several fixes prevent lost data or corrupted memory. Lazyfree
huge-page races with mremap()/munmap() could lose data or access freed
memory, and MADV_COLD could lose a concurrent write's dirty bit.
Another fix prevents stale migration entries from outliving large
folios. On filesystems with blocks smaller than a page, extending a
file by 4 GiB or more could expose bytes written past the old EOF
through mmap instead of zeroes. That is fixed, along with
use-after-free races in PAGEMAP_SCAN during process exit and in
memory-cgroup accounting on PREEMPT_RT kernels.
Other fixes stop UFFDIO_MOVE spinning forever on pinned large folios,
which could wedge other memory operations, and stop mremap() leaking
commit charges until allocations fail under strict overcommit. A
further fix keeps userfaultfd tracking intact on neighboring mappings.
NUMA binding no longer prevents long-term pins when the chosen node
has only movable memory, fixing QEMU/VFIO startup and io_uring buffer
registration failures. MGLRU also gets a fix for early-boot crashes
with memory cgroups disabled at boot, notably in small crash kernels.
* tag 'mm-stable-2026-10-25-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (213 commits)
mm: multi-gen LRU: fix NULL lruvec->pgdat deref with memcg disabled on cmdline
mm/page_counter: use WRITE_ONCE() for emin/elow when parent is the root
mm/memcontrol: publish null pointer before dropping css reference
test_maple_tree: test maple_range_64 node in RCU mode
maple_tree: fix maple_range_64 crashes in RCU mode
mm/vma: avoid broken uffd merge on mremap
tools/testing/shared: catch a failed posix_memalign()
mm/damon/core: remove unreachable damos charge_{target,addr}_from
mm/shrinker: allocate shrinker_info_unit from a dedicated kmem_cache
riscv: mm: exclude invalid THP PMDs from page table check
mm/damon/core: filter out damos address filter-split failed region
fs/proc/task_mmu: pin mm_users in do_pagemap_scan()
mm/mempolicy: apply bind policies against the scoped allocation zone
mm/vmscan: reclaim every zone in per-node proactive reclaim
mm/mremap: correctly uncharge accountable VMAs in error path
mm/mremap: populate calculated fields in vrm state correctly
MAINTAINERS: add an entry for MEMORY MANAGEMENT - MEMORY MAP
mm: bdi: reset min_ratio after the sysfs attributes are gone
mm/page_vma_mapped: continue past nonmatching huge PMDs
selftests/mm: skip hugetlb cgroup v2 tests without the needed controllers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: exit recovery thread on mount error path" (Joseph Qi):
Stop OCFS2 recovery before freeing failed-mount state and replay
slots, closing use-after-free and double-free races. Defer
suballocator reclaim to break a transaction-lock deadlock with
dismount.
- "ocfs2: validate suballoc slot and bit of metadata blocks" (Joseph
Qi):
Validate OCFS2 metadata suballocator slots, bits and directory index
block locations. Reject corrupt metadata with filesystem errors
instead of BUGs or out-of-bounds accesses.
- "ocfs2: deal with legacy signed name hash values" (Joseph Qi):
Restore OCFS2 lookups for non-ASCII names stored with legacy signed
hashes. Use stored xattr hashes during bucket splits to avoid
duplicate entries and spurious ENOSPC failures.
- "ocfs2: stabilize dentry names in file and setattr traces" (Cen
Zhang):
Snapshot OCFS2 names during file and setattr tracing to prevent
rename races using freed storage or mismatched names and lengths.
Preserve trace formats and the locked release open-count sample.
- "panic: fix panic_force_cpu= redirect races and NMI bypass" (Bradley
Morgan):
Fix panic_force_cpu races and NMI redirection so crash-kernel CPU
selection is honored. Preserve variable arguments on failed redirects
and use a static message buffer.
- "fat: allocate multiple clusters in fallocate" (Matheus Alves de
Almeida):
Allocate FAT clusters in batches for FALLOC_FL_KEEP_SIZE and batch
FAT updates. This removes repeated single-cluster allocation
overhead, particularly on synchronous mounts.
- "scripts/gdb: fix radix tree lookup and stack depot diagnostic"
(Ting-Han Hou):
Fix GDB radix-tree lookup and its handling of XArray sibling, retry
and zero entries. Also repair the stack-depot diagnostic for an
out-of-range pool index.
- "hung_task: Improve warning budget handling and task reporting"
(Aaron Tomlin):
Reset the hung-task warning budget after recovery so later hangs
remain visible. Keep the configured limit intact and emit one summary
per scan when detailed reports exhaust the budget.
- "bootconfig: Reject unexpected data after null character and
cleanups" (Masami Hiramatsu):
Reject bootconfig data after an embedded null while accepting
trailing padding. Validate the full input in the userspace tool, and
retain internal tree sanity checks there rather than in the kernel.
- "kbuild: GCOV cleanups following the prefer-atomic fix" (Konstantin
Khorenko):
Use the actual GCOV build flags in the prefer-atomic compiler probe.
Move flag setup into scripts/Makefile.gcov and skip the probe when
GCOV is disabled.
- "ocfs2: xattr bucket validation fixes" (Joseph Qi):
Accept valid OCFS2 xattr buckets spanning 512-byte blocks, avoiding
false read-only remounts. Reject misaligned buckets and return errors
instead of panicking on corrupt defrag metadata.
- "ocfs2: fix metadata reservation for xattr value trees" (Joseph Qi):
Reserve enough OCFS2 metadata for new and relocated xattr value
trees. Fix shortfalls which could cause ENOSPC, dropped entries and
leaked clusters on fragmented filesystems; remove duplicate
reservations.
- "Introduce arch_do_panic" (Mete Durlu):
Add arch_do_panic() and move s390 and sparc handling out of generic
panic code. The architecture-specific actions now follow the
end-of-panic marker.
- "checkpatch: userspace improvements" (Petr Vorel):
Improve checkpatch's userspace detection and suppress kernel-only
checks. Recognize standard inttypes macros and add explicit
--userspace and --no-userspace overrides.
- "ocfs2: validate dr_fs_generation of dir index root blocks" (Joseph
Qi):
Check OCFS2 directory index generations and leaf block numbers.
Reject stale or misplaced blocks instead of using metadata left by a
previously formatted filesystem.
- "selftests/membarrier: Skip an unregistered memory barrier test on
Musl" (Chris Gellermann):
Skip the unregistered membarrier test when libc has already
registered the command. Musl does this during thread creation,
causing false failures in the multithreaded test.
- "init: fix array boundary bugs in boot parameter parsing"
(Wilson Felipe Pereira):
Fix boot argument boundary cases which leave stale arguments in
init's command line or panic when replacing the final environment
variable. Clear the last slot and check duplicates before the limit.
Summary of the 87 singletons in this merge:
The OCFS2 singletons fix deadlocks between xattr updates and inline
truncation, and during inode reclaim. Corrupt quota and extent
metadata could also crash the kernel or corrupt memory; these paths
now check the layout before using it. Other fixes close use-after-free
and publication races around cluster reconfiguration, node failure,
quota remount errors and shared refcount trees. New files now retain
security labels from all stacked LSMs instead of silently dropping all
but one. Valid xattr insertions also stop tripping FORTIFY on builds
with counted arrays.
Elsewhere, a lost wakeup could leave hardware-monitoring reads stuck
in unkillable sleep and block further I2C traffic. That is fixed, as
are kernel memory leaks in POSIX message-queue notifications and tmpfs
casefold setup which could grow until memory is exhausted. A driver
removal race which could crash the kernel is fixed too. The
hibernation command through reboot() also stops taking the same mutex
twice, avoiding a deadlock before suspension.
On the boot side, bzip2 decoding now accepts valid full blocks emitted
by lbzip2, fixing failures to boot those compressed kernels. Malformed
bzip2 streams can no longer overflow the decode buffer, and LZ4
initrds are checked before the decoder can read past their end. FAT
rejects geometry which overflows the data-area calculation on 32-bit
systems, and rolls back entries when inode setup fails, preventing
failed creations from reappearing after remount. The x86 XOR and RAID6
AVX paths also avoid imposing a slowdown on subsequent SSE code.
* tag 'mm-nonmm-stable-2026-10-25-14-57' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (134 commits)
scripts/gdb: fix stack depot out-of-bounds diagnostic
scripts/gdb: fix radix tree lookup pointer handling
ocfs2/cluster: remove zero-address nodes from IP tree on teardown
ocfs2: snapshot the dentry name while tracing file release
ocfs2: snapshot dentry names in file and setattr traces
ocfs2/dlm: drain join handlers before releasing module text
MAINTAINERS: update Markus's e-mail address
mailmap: add entries for Andrew Jones
stackdepot: stop preallocating after the final pool
ocfs2: drain quorum work before removing the cluster
watchdog: force console verbose when reporting lockups
profiling: fix sampling step on 64-bit big-endian systems
kernel/reboot: avoid potential deadlocks during suspension
compat: avoid double rounding in times()
ocfs2: pin owning modules for open debugfs files
ocfs2/cluster: initialize heartbeat regions before publishing them
selftests/proc: proc-pid-vm: fix unused variable warning on non-x86
ocfs2: pin refcount trees before dropping the lookup lock
ocfs2: validate the xattr tree root of an indexed xattr block
ocfs2/dlm: hold the lookup reference across convert AST enqueue
...
|
|
A rescuee can keep running after its grant is served, on a cpu its scheduler
has lost. The write rules deny a slice extension only where the scheduler
lacks SCX_CAP_BASE on the cpu, and a scheduler holding BASE but not ENQ can
have a task under rescue there:
1. the scheduler extends the rescuee's slice
2. BASE is revoked. The cap-revoke eviction skips the rescuee.
3. the grant is served and scx_rescue_charge() ends the rescue
4. the task runs out the extension on the cpu its scheduler lost, outside
the rescue's bandwidth
A scheduler shortens or zeroes a rescuee's slice to preempt it, and
scx_rescue_keep() resumes the grant afterwards. An extension serves no such
purpose.
Refuse extending a kernel slice in both scheduler write paths, the direct
write in scx_bpf_task_set_slice() and the out-of-band application, counted
in SCX_EV_SLICE_DENIED like an extension without BASE. Shortening stays
allowed.
scx_rescue_keep()'s restore of the remainder raises the slice from zero.
Like the kernel's other slice writes, it goes through scx_set_task_slice()
and not the scheduler write paths.
v2:
- scx_rescue_admit()'s kerneldoc no longer mentions a served-time snapshot.
- SCX_EV_SLICE_DENIED's comment lists every refusal it counts.
- scx_bpf_task_set_slice()'s kerneldoc says that shortening is refused on a
protected slice.
Fixes: 5fd501744b10 ("sched_ext: Add bandwidth-limited rescue execution for stranded tasks")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
In the following patches, bypassed tasks run under rescue when their host
lacks SCX_CAP_BASE on the cpu. Under bypass the kernel zeroes the running
task's slice at every tick, as it does not trust the scheduler's slices.
A rescue grant has to survive that, or it is served a tick at a time with
the rescuee sent to the tail of the local DSQ each time. The generic slice
handling can't tell a kernel grant from a scheduler's slice.
Mark the grant as a kernel slice with SCX_TASK_KERNEL_SLICE, set at rescue
admission and cleared when the slice ends. The generic slice handling leaves
it alone. The default refill does nothing for it, and the three zeroings go
through the new expire_task_slice(), which skips it:
- the bypass tick's zeroing of the running task
- the eviction of a running task that can't stay on the cpu when bypass
lifts
- the cap-revoke eviction of a running task
Schedulers keep their control. Preemption and scx_bpf_task_set_slice() still
apply, and the rescue stays bounded by served time.
The sites that recognized the rescuee by identity, the reenqueue scan and
put_prev_task_scx()'s reinsert, test the flag instead.
scx_task_has_kernel_slice() hides the test behind the scx_has_subs() static
key, as only a sub-scheduler's task can carry the flag. The flag's entries
join the enum tables in tools/sched_ext.
No kernel slice reaches a zeroing until bypassed tasks run under rescue. The
cap-revoke eviction skipped the rescuee already, and bypass entry ends an
open rescue, so the bypass tick and the eviction at bypass lift see none.
The refill is the one behavior change. The pick refills a zero slice only
for a task that can stay on the cpu, so it concerns a rescuee whose
scheduler holds BASE there. A scheduler may zero such a queued rescuee's
slice, and the next pick used to refill it to the default.
Now the rescuee runs on the zero slice until the next tick. There
put_prev_task_scx() restores the remainder when another task is runnable.
When nothing else is runnable, dispatch_one() keeps the rescuee as the last
task. The pick then ends its zero slice, which ends the rescue, and refills
the default. A scheduler with SCX_OPS_ENQ_LAST skips the keep-last test.
scx_rescue_keep() restores the remainder there instead and the rescue goes
on.
v2:
- scx_rescue_admit()'s kerneldoc no longer mentions a served-time snapshot.
- The description covers a scheduler with SCX_OPS_ENQ_LAST, whose rescuee
dispatch_one() keeps on the remainder.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The following patches add a flag for a kernel-owned slice to scx_ent_flags.
The two 3-bit fields, the task state at bits 8 to 10 and the reenqueue
reason at bits 12 to 14, sit right above the single-bit flags, so the new
flag would have to take bit 11 or 15, out of sequence with the rest.
Pack the fields at the top of the word, below SCX_TASK_CURSOR, the state at
bits 25 to 27 and the reason at bits 28 to 30, so that the single-bit flags
continue from bit 8.
The renumbering changes the values a BPF scheduler reads from p->scx.flags.
Nothing in the kernel or the in-tree schedulers hardcodes the numbers. The
enum ABI table in tools/sched_ext/include/scx/enums_abi.autogen.h, kept for
repairing enum values that a kernel's BTF truncates, is regenerated for the
two fields. In the scx repository, scx_eevdf tests SCX_TASK_REENQ_IMMED and
SCX_TASK_REENQ_PREEMPTED against SCX_TASK_REENQ_REASON_MASK. Those three
names belong in its load-time enum table, so that they follow the running
kernel. No behavior change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, key enhancements focus on introducing a dedicated
metadata cache infrastructure and dynamically parameterizing on-disk
block layouts and geometry macros.
Moving meta, node, and compress blocks out of the VFS page cache
removes the page == block size assumption for metadata, which along
with dynamic block layout descriptions paves the way for large folio
and page != block support in the future.
We also opt in to multigrain timestamps, add bio entry-count
throttling for asynchronous write_end_io completion, and expose the
resizable_tail feature via sysfs.
Alongside these features, critical bug fixes resolve race conditions
across compression, mmap write faults, checkpoint/shutdown, and
filesystem freeze, prevent write bio splitting and GC holes on
sequential zoned devices, and strengthen on-disk sanity checks for
SIT/NAT bitmaps, read-only curseg entries, and device aliasing.
Additional stability patches address online resize, roll-forward
recovery, atomic file operations, quota handling, and dirty inode
syncing livelocks.
Enhancements:
- implement dedicated metadata cache for meta, node, and compress
blocks to decouple metadata from page cache for large folio and
page != block support
- dynamically describe SIT, NAT, orphan, dentry, node, and xattr
block layouts and parameterize block/sector/node conversion macros
- opt in to multigrain timestamps
- introduce max_atc_write_bio_entry_cnt sysfs node
- expose resizable_tail feature via sysfs
- avoid unnecessary reads in f2fs_update_meta_block()
Bug fixes:
- compress: force out-place update for all writes, allow pinning
empty compressed files, and fix truncate/writeback and cache
population races
- zone: avoid bio split and GC target block grab failure on
sequential zones
- quota: convert inline quota files on quotaon, fix flush failure
during freeze, and restore empty string mount options
- atomic/mmap: disallow mmap write and data-modifying fallocate on
atomic files, avoid truncate_inode_pages_final() on live inodes,
and fix races in f2fs_vm_page_mkwrite()
- resize/alias: refresh pinned allocation boundary and flush SIT
journal during resize, and drop pending discards before reserving
device alias
- sanity check: bound SIT/NAT bitmaps by checkpoint pack, check all
cur_*_segno[] on readonly images, and validate multi-device on
device alias
- recovery/cp: release removed xattr node in roll-forward recovery,
invalidate curseg on change_curseg() failure, and return -EIO for
lost inode block after cp_error
- fix livelock in syncing dirty inodes and preserve APPEND/UPDATE ino
entries
- use bio_in_atomic() in f2fs_{read,write}_end_io()
- fix 32-bit shift truncation in mount option bitmasks and defragment
range
And a number of minor bug fixes"
* tag 'f2fs-for-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (79 commits)
f2fs: compress: don't overwrite populated compress cache entry
f2fs: fix to update superblock crc in sanity_check_area_boundary()
f2fs: fix to fetch ino via ino_of_node() under cache lock
f2fs: zone: fix to don't fail to grab GC target block on zoned device
f2fs: don't use truncate_inode_pages_final() on live inodes
f2fs: expose resizable_tail feature via sysfs
f2fs: use BIT_ULL for mount option bitmasks
f2fs: fix submit accounting for IPU writeback
f2fs: fix to avoid potential reference count leak in do_garbage_collect()
f2fs: refresh pinned allocation boundary after resize
f2fs: flush SIT journal during filesystem resize
f2fs: release a removed xattr node in roll-forward recovery
f2fs: quota: fix quota flush failure during filesystem freeze
f2fs: return -EIO for a lost inode block after cp_error
f2fs: avoid unnecessary reads in f2fs_update_meta_block()
f2fs: bound the SIT/NAT bitmaps by the checkpoint pack
f2fs: opt in to multigrain timestamps
f2fs: fix to use bio_in_atomic() in f2fs_read_end_io()
f2fs: fix to use bio_in_atomic() in f2fs_write_end_io()
f2fs: fix to invalidate curseg if change_curseg() fails
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add dax backing and extent map support for famfs (John Groves,
Miklos)
- Support large folios (Joanne)
- Add selftests and documentation of caching behavior (Luis Henriques)
- Add FUSE_SYNCFS request (Jimmy Zuber)
- Convert readdir cache to use folios (Tal Zussman)
- Lots of bug fixes
* tag 'fuse-update-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (53 commits)
fuse: handle extent map files in fuse_passthrough_fadvise()
fuse: resolve extent maps in O(1) when possible
fuse: add support for striped backing
fuse: add extent map I/O support
fuse: add extent map data structure
fuse: add support for opening dax device as backing
fuse: support opening 64 bit backing ID
fuse: support 64 bit, server allocated backing ID
fuse: add helpers for EIO return value with kernel message
dax: use READ_ONCE() in dax_holder()
dax: add fsdev_dax_from_file()
fuse: fix copy_file_range reply handling race
virtiofs: validate fixed-output response length
fuse: don't d_drop() before d_splice_alias()
virtio_fs: read the vring size under virtio_fs_mutex in ->get_tree
fuse: validate folio state before pipe_buf_try_steal() in fuse_try_move_folio()
fuse: rename fuse_direct_io() to fuse_do_direct_io()
fuse: Forward vfs_fadvise to backing_file in passthrough mode
selftests/fuse: add the missing FUSE_HAS_SYNCFS privilege test
fuse: don't launder folios of a bad inode
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs keyring updates from Christian Brauner:
"The kernel has two keyrings that userspace fills with X.509
certificates at boot: .fs-verity for fs-verity built-in signatures
and .dm-verity for dm-verity root hash signatures.
Neither is linked into any process keyring. Hence, request_key() and
KEYCTL_SEARCH can't find them. The only way for userspace to identify
them is to read their serial number out of /proc/keys. That is not
just a large file often the names can also be reused and appear
multiple times which allows forging these keyrings.
This adds two fixed special key ids, KEY_SPEC_DM_VERITY_KEYRING and
KEY_SPEC_FS_VERITY_KEYRING next to KEY_SPEC_BPF_KEYRING. The latter
went in through bpf-next this merge window.
lookup_user_key() resolves the fixed key ids to the two keyrings. So
userspace can add a dm-verity (fixed keyring id: -10) certificate with
keyctl padd asymmetric "" -10 < cert.der
and seal the keyring with
keyctl restrict_keyring -10
without looking anything up first"
* tag 'vfs-7.4-rc1.keyring' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
Documentation: keys: document IDs added since KEY_SPEC_REQKEY_AUTH_KEY
keys: add KEY_SPEC_FS_VERITY_KEYRING
keys: add KEY_SPEC_DM_VERITY_KEYRING
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring dma-buf support from Jens Axboe:
"This adds native dma-buf support to the I/O path, exposed through
io_uring. It's been in development for a while and should be ready to
go now.
- dma-buf file I/O infrastructure: a dma_buf_io_ctx created through a
new ->init_dma_buf_io_ctx file operation, and a dma_buf_io_map
holding the device DMA mapping. The two are split so a mapping can
be invalidated and re-established underneath a live context, with
the map counting in-flight requests so it can be torn down safely.
- A new iov_iter type for dmabuf maps, and a dma map backed bio type
for the block layer, with raw block device support on top.
- nvme-pci backend implementing dma-buf backed requests, including
SGL support.
- io_uring dmabuf backed registered buffers, built on a reworked
buffer registration structure with an extended update path, regbuf
import flags, an uncloneable flag for buffer types that can't be
cloned, and cloning support for registered dma-bufs"
* tag 'for-7.4/io_uring-dmabuf-20261023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/dma-buf: don't fail fixed buffers without dma-buf support
nvme-pci: detach dma-bufs only on removal
block: reject dma-bufs larger than 4GiB
io_uring/dma-buf: allow cloning registered dma-bufs
dma-buf-io: document dma_buf_io_init_map
dma-buf-io: fix typos in kernel docs
block: fix indention for dma-buf checks
io_uring/rsrc: add dmabuf backed registered buffers
io_uring/rsrc: add regbuf import flags
io_uring/rsrc: add uncloneable regbuf flag
io_uring/rsrc: extend buffer update
io_uring/rsrc: introduce buf registration structure
nvme-pci: add SGL support for the dmabuf path
nvme-pci: implement dma-buf backed requests
nvme-pci: rename nvme_pci_sgl_set_data to nvme_pci_dma_iter_set_sgl
block: add dma-buf support for raw bdev
block: introduce dma map backed bio type
block: always adjust bi_offset on bio_advance_iter
iov_iter: add iterator type for dmabuf maps
dma-buf: introduce initial file I/O infrastructure
|
|
- Print large 32-bit bounds without sign extension.
- Omit 32-bit bounds when they coincide with 64-bit bounds.
Before:
loop header at ..., widening r0 to 0x80000000..0xffffffff (s32 0xffffffff80000000..-1) step 1
loop header at ..., widening r0 to 0..3 (s32 0..3) step 1
After:
loop header at ..., widening r0 to 0x80000000..0xffffffff (s32 0x80000000..-1) step 1
loop header at ..., widening r0 to 0..3 step 1
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://patch.msgid.link/20261026-scev-simpler-clamp-v2-6-f373aec9825f@gmail.com
|
|
Commit d1706f9da9f4 ("PM: runtime: call pm_runtime_dont_use_autosuspend() on reinit()")
introduced a pm_runtime_dont_use_autosuspend() call that is executed automatically
on driver exit without making any changes to the kerneldocs.
Update the kerneldocs to clarify the current mechanism of
pm_runtime_use_autosuspend() cleanup on exit.
Fixes: d1706f9da9f4 ("PM: runtime: call pm_runtime_dont_use_autosuspend() on reinit()")
Signed-off-by: Joshua Crofts <crofts@kernel.org>
[ rjw: Added Fixes: tag ]
Link: https://patch.msgid.link/20261027122042.1444-1-crofts@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_iommu_configure_id() currently only supports IORT and VIOT. Add
support for LoongArch's IOVT as well.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch IOMMU scanning flow is similar with virtio-iommu, there is an
early init phase and a late init phase. In the early init function, PCI
ACS is enabled if there is IOMMU table, and the late init function is
called after PCI device scanning, where IOVT table scanning function is
executed.
Here add acpi_arch_init() and acpi_arch_late_init() API for LoongArch:
the acpi_iovt_init() function is to enable PCI ACS function if the IOMMU
device exists in IOVT table; while the acpi_iovt_late_init() function is
to scan IOVT table and add IOMMU devices.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The comment "not really needed" has been there since the inception
of git history. I have done build testing of all files that use
<linux/cdrom.h> with no problems found.
<linux/libata.h> includes <linux/cdrom.h>. I have also build tested
99% of the files that use <linux/libata.h> with no build issues found.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20261026220823.1162-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
'clk-tenstorrent' and 'clk-pile' into clk-next
* clk-renesas: (25 commits)
clk: renesas: r8a78000: Add SGASYNCD8_PERW_BUS
clk: renesas: rzg2l: Fix internal clock names
clk: renesas: r9a08g046: Add TSU and ADC1 clocks and resets
clk: renesas: Add support for RZ/G2M v3.0
clk: renesas: r9a08g046: Add CANFD clocks and resets
clk: renesas: r9a08g046: Propagate clk rate for ETH TX mux clocks
dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions
clk: renesas: r8a779g0: Add ZG clocks
clk: renesas: rcar-gen4: Tidy up DEF_GEN4_Z()
clk: renesas: r9a09g077: Register SYSC regmap
clk: renesas: rcar-gen3: Use FIELD_GET()
clk: renesas: rzv2h: Convert to clk_hw based provider API
clk: renesas: rzv2h: Drop duplicated parent lookup in fixed_mod_status_clk_register()
clk: renesas: r9a08g046: Add PCIe clocks and reset
clk: renesas: Make sure clk_init_data is fully initialized
clk: renesas: r9a08g046: Add clock and reset entries for LVDS
clk: renesas: r9a08g046: Add MIPI DSI and LCDC clock/reset entries
clk: renesas: r9a08g046: Sort macro definitions alphabetically
clk: renesas: rzg2l: Add support for RZ/G3L DSI mux
clk: renesas: rzg2l: Add support for LVDS fixed-factor divider with 4:7 duty cycle
...
* clk-samsung:
clk: samsung: acpm: add Exynos850 support
clk: samsung: acpm: introduce driver data for SoC-specific clocks
clk: samsung: Introduce Exynos5515 clock driver
clk: samsung: clk-pll: Add support for pll_309
dt-bindings: clock: Add Exynos5515 SoC
* clk-starfive:
dt-bindings: soc: starfive: Add StarFive JHB100 syscon modules
dt-bindings: clock: Add StarFive JHB100 Peripheral-3 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-2 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-1 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 Peripheral-0 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 System-2 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 System-1 clock and reset generator
dt-bindings: clock: Add StarFive JHB100 System-0 clock and reset generator
* clk-tenstorrent:
MAINTAINERS: Update RISC-V Tenstorrent SoC entry
clk: tenstorrent: use regmap_assign_bits() for conditional set/clear
clk: tenstorrent: Fix refcount leak on shared gate clk enable failure
clk: tenstorrent: Assign .num before accessing .hws
* clk-pile: (126 commits)
clk: imx: pll14xx: support spread spectrum clock generation
clk: cdce925: Size the PLL child name buffer for any int
clk: stm32: fix clock array size for STM32MP21
dt-bindings: clock: Convert HiSilicon clocks to DT schema
clk: lmk04832: Handle reset GPIO lookup errors
dt-bindings: clock: anlogic,dr1v90-cru: make external clocks optional
clk: tegra: bpmp: remove kcalloc
clk: mmp2-audio: add missing PM_CLK dependency
clk: zte: Introduce a driver for zx297520v3 LSP clocks
clk: zte: Introduce a driver for zx297520v3 matrix clocks
clk: zte: Introduce a driver for zx297520v3 top clocks
clk: zte: Add zx PLL support infrastructure
clk: zte: Add regmap-based clocks
clk: zte: Add Clock registration infrastructure
dt-bindings: clk: zte: Add zx297520v3 LSP clock and reset controller
dt-bindings: clk: zte: Add zx297520v3 matrix clock and reset controller
dt-bindings: clk: zte: Add zx297520v3 top clock and reset controller
clk: nuvoton: ma35d1: Add missing WDT/WWDT parent clocks
dt-bindings: clock: ma35d1: Add missing WDT/WWDT parent clocks
dt-bindings: clock: ma35d1: Drop CLK_MAX_IDX define
...
|
|
and 'clk-qcom' into clk-next
* clk-allwinner:
clk: sunxi-ng: ccu_common: Use readl_relaxed_poll_timeout_atomic for PLL lock
clk: sunxi-ng: sun55i-a523-r-ccu: Use P-only clocks for timers
clk: sunxi-ng: sun55i-a523-ccu: Use P-only clocks for high-speed timers
clk: sunxi-ng: sun55i-a523-ccu: Use M-only clocks for MBUS, IOMMU and DRAM
clk: sunxi-ng: div: Add feature support to M clock macro
* clk-amlogic:
clk: meson: t7: don't mark sys_ampipe_nand as critical
dt-bindings: clock: Add Amlogic A9 SCMI clock controller
clk: meson: t7: keep the memory fabric clocks running
* clk-imx:
clk: imx: Fix clock reference leak in imx_obtain_fixed_clock_hw()
clk: imx: Fix clock reference leak in imx_get_clk_hw_by_name()
clk: imx: fracn-gppll: Add 350 MHz support
clk: imx: composite-93: return timeout from gate enable
* clk-microchip:
clk: at91: main: Drop unneeded cast in at91_clk_register_main_osc()
* clk-qcom: (156 commits)
clk: qcom: Add support for camera clock controller on Maili
clk: qcom: ipq9650: Use icc-clk for enabling NoC related clocks
clk: qcom: ipq5210: add 24MHz rate for USB UTMI clock
clk: qcom: ipq5332: add 24MHz rate for USB UTMI clock
clk: qcom: ipq5018: add 24MHz rate for USB UTMI clock
clk: qcom: Fix camera rivian PLL configuration settings
clk: qcom: videocc-sm8350: Use common probe handling for always-on clocks
clk: qcom: videocc-sm8250: Use common probe handling for always-on clocks
clk: qcom: videocc-sm7150: Use common probe handling for always-on clocks
clk: qcom: videocc-sm6350: Use common probe handling for always-on clocks
clk: qcom: videocc-sa8775p: Use common probe handling for always-on clocks
clk: qcom: lpasscorecc-sc7180: Use common probe handling for always-on clocks
clk: qcom: gpucc-x1p42100: Use common probe handling for always-on clocks
clk: qcom: gpucc-x1e80100: Use common probe handling for always-on clocks
clk: qcom: gpucc-sm8550: Use common probe handling for always-on clocks
clk: qcom: gpucc-sm4450: Use common probe handling for always-on clocks
clk: qcom: gpucc-sc8280xp: Use common probe handling for always-on clocks
clk: qcom: gpucc-sc7280: Use common probe handling for always-on clocks
clk: qcom: gpucc-sar2130p: Use common probe handling for always-on clocks
clk: qcom: gcc-x1e80100: Use common clock controller probe data
...
|
|
The clock controller of the zx297520v3 Low Speed Peripherals is
relatively clean. One register per device with gates, muxes and resets
and for some devices a divider. There are even bits in the matrix
controller to control propagation of clock lines down to LSP.
The clocks are sorted by register address and I am convinced that the
device list is complete. There are, however, a few more registers that
are likely extra dividers for TDM and I2S devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
This controller contains clocks and resets for high speed devices on the
zx297520v3 board and hardware spinlocks that I expect will be necessary
to communicate correctly with the LTE DSP firmware blob.
I don't know much about the hwlocks yet other than that they exist, so
there is no header yet adding meaning to their indices. Presumably that
meaning doesn't exist in hardware and is de facto defined by ZTE's
firmware blobs running on the rprocs.
The zte-zx297520v3-crm driver will instantiate separate MFD children for
clocks and resets, which are handled by separate clock and reset
drivers.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
These SoCs have 3 clock and reset controllers: Top, Matrix and LSP.
Clocks go from oscillator -> top -> matrix -> LSP, with a register in
top controlling most clocks that get passed to matrix and a register in
matrix controlling all the clocks that get passed to LSP.
Generally every device has two clocks (one work clock, and one that
connects it to the bus, I call it PCLK), two reset bits (I don't know
what the difference is - sometimes asserting one is enough to reset the
device, sometimes both need to be asserted). PCLK and WCLK are
controlled by individual gates. Some devices have a mux and/or a
divider for their work clock. Some devices, like the GPIO controller,
only have reset bits and no clocks.
The top clock controller is fed by a 26 MHz external oscillator and has 4
PLLs to generate other clock rates. ZTE's kernel mostly relies on the
boot ROM to set up PLLs, but one LTE-related PLL is not configured
on some boards. Therefore my driver contains code to program PLLs. It
produces identical settings as the boot ROM for the pre-programmed
frequencies.
Not all clocks will have an explicit user in the end. I am defining a
lot of them simply to shut them off. The boot loader sets up a few of
the proprietary timers, which will send regular IRQs (although the
kernel of course doesn't need to listen to them). I don't plan to add a
driver for the proprietary timer as I see no use for them - the ARM arch
timer works just fine. I will add a driver for the very similar
proprietary watchdog though.
The clock list in this patch is pretty complete but not exhaustive.
There are other bits that are enabled, but I couldn't deduce what they
are controlling by trial and error. Some of them seem to do nothing.
Others cause an instant hang of the board when disabled. It is quite
likely that a handful more clocks will be added in the future, but not a
large number.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Stefan Dösinger <stefandoesinger@gmail.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
The WDT and WWDT muxes have PCLK3/4096 and PCLK4/4096 among their
possible parents, but these fixed factor clocks are currently not
defined, even though they are needed to properly describe the clock
tree. Add them to the bindings.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260930-perso-ma35d1-upstream-clk-v6-4-48937ee6c9bb@bootlin.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
Drop CLK_MAX_IDX define of MA35D1 include. This is not a binding and
should not be placed here. Value is defined in the user driver.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260930-perso-ma35d1-upstream-clk-v6-3-48937ee6c9bb@bootlin.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Core: Add `led_trigger_notify_hw_control_changed()` to allow
drivers to notify the core of autonomous hardware control
transitions
- Core: Add the `hw_offloaded()` trigger callback and
`trigger_may_offload_to_hw` sysfs attribute to expose
hardware-offloaded triggers
- Netdev Trigger: Implement the `hw_offloaded()` callback to report
hardware control state to the LED core
- Analog Devices LTC3208: Add support for the LTC3208 7-channel
multi-display I2C LED driver
- ChromeOS EC: Implement the `hw_offloaded()` callback for the
`chromeos-auto` trigger
- CZ.NIC Turris Omnia: Implement the `hw_offloaded()` callback and
declare `omnia-mcu` as a hardware control trigger
- STMicroelectronics ST1202: Add hardware-accelerated blink support
via `blink_set()`
Improvements & Fixes:
- Class: Always hold the `led_access` mutex in `brightness_show()` to
avoid exposing transient registration states
- Class: Deactivate active hardware control triggers when writing to
the `brightness` sysfs attribute
- Core: Enforce strict validation in `led_trigger_is_hw_controlled()`
and warn on legacy fallback paths
- Flash Class: Initialize the fault variable in `flash_fault_show()`
to prevent undefined behavior when callbacks perform bitwise ORs
- Kinetic KTD2692: Pass the driver context directly to
`regulator_disable_action()` to prevent a NULL pointer dereference
during error unwinding
- Maxim MAX77705: Use `fwnode_for_each_child_node_scoped()` in
`max77705_add_led()` to prevent child node reference leaks on error
paths
- NXP PCA9532: Check the return value of `i2c_smbus_read_byte_data()`
in `pca9532_getled()` to avoid integer underflow on read errors
- Qualcomm WLED: Fix a NULL pointer dereference in `wled_remove()` by
setting platform driver data in `wled_probe()`
- Qualcomm WLED: Fix the WLED3 brightness register stride to prevent
consecutive string writes from overlapping
- Qualcomm WLED: Read back the hardware-programmed brightness at
probe, expose it via `get_brightness()`, and prevent unbalanced OVP
IRQ enabling
- STMicroelectronics ST1202: Clear unused PWM pattern slots in
`pattern_set()` and `blink_set()` to prevent unintended output when
sharing the global sequencer
- STMicroelectronics ST1202: Program and cap the channel current
according to `max_brightness` across brightness, blink, and
hardware pattern modes, and scale pattern brightness to the 12-bit
PWM range
- STMicroelectronics ST1202: Retain a reference to each child LED
firmware node for the lifetime of the device
- STMicroelectronics ST1202: Use only the blocking
`brightness_set_blocking()` callback to avoid sleeping in atomic
context during I2C transfers
- TI LM3692x: Check the final register write in
`lm3692x_leds_enable()` to prevent regulator/GPIO leaks and an
inconsistent enabled state
- TI LP8860: Fix a `device_node` reference leak in `lp8860_probe()`
using `__free(device_node)`
Cleanups & Refactoring:
- Core: Move `led_trigger_is_hw_controlled()` and `led_trigger_group`
from `led-class.c` into `led-triggers.c`
- Core: Replace conditional `set_bit()`/`clear_bit()` patterns with
`assign_bit()` and `__assign_bit()`
- Flash Class: Simplify `flash_fault_show()` using `sysfs_emit_at()`
and omit the trailing space
- Maintainers: Add Griffin Kroah-Hartman as an LED subsystem reviewer
- Intel SS4200: Fix a spelling typo in a comment
- ISSI IS31FL32xx: Convert DT-specific parsing helpers to generic
device and fwnode property APIs
- NXP PCA955x: Drop redundant intermediate platform data and allocate
the LED array using a flexible array member
- Qualcomm LPG: Convert LED and channel parsing to fwnode APIs and
avoid leaving `default_trigger` uninitialized
- Skyworks AAT1290: Use `ARRAY_SIZE()` when allocating
`mm_current_scale` to match the target pointer type for type-aware
allocators
- STMicroelectronics ST1202: Introduce a `st1202_iled_max()` helper
to unify channel current ceiling calculations
- STMicroelectronics ST1202: Standardize variable and macro naming,
fix helper spelling, and use `u8` consistently instead of `uint8_t`
- Syscon: Convert from OF-specific property helpers to the generic
device property and fwnode APIs
Device Tree Binding Updates:
- Core: Allow PHY RX triggers (`phy[0-9]+rx`) in
`linux,default-trigger`
- Core: Standardize example indentation across multiple LED and
backlight binding schemas
- Analog Devices LTC3208: Document the LTC3208 multi-display LED
driver
- LaCie netxbig: Convert LED bindings to DT schema
- Motorola CPCAP: Convert LED bindings to DT schemaLEDs for v7.4"
* tag 'leds-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (49 commits)
dt-bindings: leds: lacie,netxbig-leds: Convert to DT schema
leds: pca955x: Drop platform data and allocate LEDs with the device
dt-bindings: leds: Use consistent indentation in the example
backlight: qcom-wled: Read back the programmed brightness at probe
backlight: qcom-wled: Fix unbalanced OVP IRQ enable at probe
backlight: qcom-wled: Fix WLED3 brightness register stride
backlight: qcom-wled: Fix NULL pointer dereference in wled_remove()
dt-bindings: leds: Allow PHY RX triggers
MAINTAINERS: Add myself as a LED SUBSYSTEM reviewer
leds: trigger: Add led_trigger_notify_hw_control_changed() interface
leds: trigger: Enforce strict checks in led_trigger_is_hw_controlled()
leds: trigger: netdev: Implement hw_offloaded() callback
leds: turris-omnia: Implement hw_offloaded() trigger callback and declare hw_control_trigger
leds: cros_ec: Implement hw_offloaded() trigger callback
leds: trigger: Add hw_offloaded() callback and provide trigger_may_offload_to_hw attribute
leds: trigger: Move led_trigger_group to the right place
leds: class: Remove hardware control trigger when writing brightness
leds: trigger: Move led_trigger_is_hw_controlled() to the right place
leds: class: Always protect brightness_show() with led_access
dt-bindings: leds: leds-cpcap: Convert to DT schema
...
|
|
Several of the comments in include/linux/uaccess.h generate kerneldoc
warnings due to the use of "/**" markers on non-kerneldoc comments and
unmarked literal blocks. Bring these digressions into form and eliminate a
number of docs-build warnings. No changes to code or documentation
content.
Reviewed-by: SJ Park <sj@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <87se1ww4ld.fsf@trenco.lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Cirrus Logic CS42L43: Add support for the CS42L44 variant
- Khadas MCU: Add support for the VIM4 MCU variant along with
per-variant fan duty-cycle levels and optional fan supply regulator
support
- Maxim MAX77705: Add support for the PASS2 hardware revision
- MediaTek MT6397: Add AUXADC sub-device support for MT6397
- Motorola CPCAP: Support per-board sub-device compositions and add
the Tegra20 Mot composition
- ROHM BD73800: Add support for the BD73800 PMIC core, regulator,
RTC, clock gate, and GPIO sub-devices
- TI LM3533: Add VIN regulator supply support, configure initial
backlight mapping mode from Device Tree, and implement the
`backlight_scale` property
- X-Powers AC200: Add support for the AC200 I2C mixed-signal companion IC
Improvements & Fixes:
- Cirrus Logic CS42L43: Synchronize SoundWire enumeration work in
`remove()` before devres cleanup begins
- Dialog DA903x: Manage IRQ work cancellation and sub-device removal
via devres to prevent use-after-free during teardown
- Dialog DA9150: Balance `enable_irq_wake()` with
`disable_irq_wake()` during probe failure and driver removal
- Intel LPSS: Add DMI quirks for Dell Latitude 5285 and 7275 to
ignore ACPI resource conflicts on the I2C4 controller
- Intel Quark I2C/GPIO: Manage the fixed-rate clock and its clkdev
lookup with devres to fix a resource leak on unbind
- Maxim MAX77705: Select `REGMAP_I2C` and `REGMAP_IRQ` in Kconfig to
fix build errors
- Qualcomm WCD934x: Initialize the parent DMA mask to suppress "DMA
mask not set" warnings on child devices
- Qualcomm WCD934x: Pass the valid device pointer to
`dev_err_probe()` on IRQ lookup failure to avoid a NULL pointer
dereference
- Rockchip RK8xx: Register the poweroff handler in the atomic
`SYS_OFF_MODE_POWER_OFF` phase so polling I2C transfers complete
during shutdown
- ST-Ericsson AB8500: Use `devm_mfd_add_devices()` to prevent leaking
child devices on probe failure
- TI BQ257xx: Mark self-modifying BQ25792 configuration registers as
volatile
- TI LM3533: Set `coherent_dma_mask` to zero to suppress "DMA mask
not set" warnings
- TI TPS65217: Check for errors during IRQ initialization and
masking, and manage IRQ domain and wake teardown with devres
- TI TWL: Unregister the auxiliary platform device via a devres
action on probe failure and driver unbind
Cleanups & Refactoring
- Core: Convert drivers from deprecated `SIMPLE_DEV_PM_OPS()` to
`DEFINE_SIMPLE_DEV_PM_OPS()` and `pm_sleep_ptr()`
- Core: Fix spelling mistakes in comments across various MFD drivers
and headers
- Maintainers: Add ROHM BD73800 PMIC files under the ROHM PMIC entry
- Maintainers: Specify the `for-mfd-next` branch for the MFD and
Syscon git trees
- Dialog DA9062: Use `DEFINE_RES_IRQ_NAMED()` for IRQ resource
definitions
- Intel LPSS: Simplify DebugFS handling by dropping redundant error
checks and intermediate dentry variables, using octal permissions,
and switching to
`debugfs_remove()`
- Khadas MCU: Convert MFD cell arrays to `const` and use
`MFD_CELL_NAME()`
- ST-Ericsson AB8500: Fix a spelling typo in a comment
- TI LM3533: Convert from platform data to Device Tree bindings and
pass only regmap and light sensor presence to child devices
- TI LM3533: Remove driver-specific regmap wrappers, redundant pdata
helpers, and unnecessary `extern` qualifiers, and use `dev_groups`
for sysfs attributes
- Wolfson WM831x: Fix a spelling typo in a comment
Device Tree Binding Updates
- HiSilicon Hi6421 SPMI: Fix the compatible string to match
`hisilicon,hi6421-spmi`
- MediaTek MT6357: Allow an `adc` child node
- MediaTek MT6360: Allow two-cell interrupt specifiers with trigger
flags
- MediaTek MT6397: Document the `#sound-dai-cells` property
- MediaTek MT6397: Document the battery-backed NVMEM layout under the
RTC child node
- MediaTek MT6397: Document the MT6323 PMIC EFUSE child node
- Motorola CPCAP: Convert MFD and power button bindings to DT schema
and document the Mapphone and Mot compositions
- Qualcomm SPMI PMIC: Document the PM4125 audio codec compatible
- Qualcomm SPMI PMIC: Document the PMAU0102 PMIC compatible
- Qualcomm TCSR: Document the MSM8952 TCSR compatible
- Rockchip RK805: Fold the pin controller binding into the RK805 PMIC
DT schema
- ROHM BD73800: Document the BD73800 PMIC and its regulators
- ROHM PMIC: Factor out common pin properties into
`rohm,pmic-pins.yaml` and reference them across BD71815, BD71828,
and BD72720 bindings
- ST-Ericsson AB8500: Document AB8500 and AB8505 buck converter
regulators
- ST-Ericsson AB8500: Document codec audio graph ports, sound DAI
cells, and analog microphone wiring properties
- ST-Ericsson DB8500 PRCMU: Deprecate the `db8500-prcmu-regulators`
child node and make it optional
- Syscon: Document the Ambarella CV75 secure scratchpad compatible
- TI BQ25703A: Add the BQ25798 compatible with fallback to BQ25792
- TI Keystone: Convert Device State Control bindings to DT schema
- TI LM3533: Document the LM3533 LED controller, backlight, and
indicator LED bindings
- TI LP3943: Convert MFD and PWM bindings to DT schema
- TI TPS61050: Convert bindings to DT schema
- TI TPS65086: Make the `regulators` child node optional
- TI TPS65910: Document `wakeup-source` and GPIO hog child nodes
- TI TWL6040: Convert bindings to DT schema and align property names
with the driver
- X-Powers AC200: Document the AC200 mixed-signal companion IC"
* tag 'mfd-next-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (74 commits)
dt-bindings: mfd: db8500-prcmu: Deprecate EPOD regulators
dt-bindings: mfd: syscon: Add Ambarella CV75 secure scratchpad
dt-bindings: mfd: rockchip,rk805: Convert pinctrl to DT schema
mfd: intel-lpss: Add Dell Latitude 7275 to the resource conflict quirk
mfd: intel-lpss: Add resource conflict quirk for Dell Latitude 5285
mfd: tps65217: Use devres for IRQ domain and wake teardown
mfd: tps65217: Check return value when masking interrupt sources
mfd: tps65217: Fix NULL pointer dereference on IRQ init failure
dt-bindings: mfd: qcom,spmi-pmic: Add compatibles for pm4125-codec
mfd: bq257xx: Mark self-modifying BQ25792 registers volatile
dt-bindings: mfd: mediatek: mt6397: describe the RTC's nvmem layout
mfd: mt6397-core: Add mt6397 AUXADC support
mfd: max77705: Mark PASS2 revision as supported
mfd: ab8500: Fix child device leaks on probe failure
dt-bindings: mfd: Add MT6397 sound DAI cells
dt-bindings: mfd: mediatek: mt6397: Add mt6323 PMIC EFUSE
dt-bindings: mfd: hisilicon: Fix Hi6421 SPMI compatible
dt-bindings: mfd: ti,bq25703a: Expand to include BQ25798
dt-bindings: mfd: Allow MT6360 interrupt flags
dt-bindings: mfd: mediatek: Allow MT6357 ADC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Make ata_generic refuse to bind to non-IDE devices (me)
- Add missing <linux/pm_runtime.h> includes (Vladimir)
- Add pata_cswarp driver for the Amiga CS-Lab Warp card (Paolo)
- Fix a use-after-free and a parport attach bug in pata_parport (Pei)
- Switch ahci_da850 to DEFINE_SIMPLE_DEV_PM_OPS() (Li)
- Documentation and kernel-doc fixes (Karl, Bart, me)
- Remove the broken sata_inic162x driver (Ethan)
- Fix probe() error paths in libata, libahci and several drivers (me)
- Fail probe in sata_dwc_460ex if host activation fails (Nikolay)
- Use the standard DMA engine API in pata_arasan_cf (Frank)
- Abort multi-sector pass-through commands when multi_count is 0 (Hui)
- Replace kmap_atomic() with kmap_local_page() in libata-sff (Danish)
- Revert the no longer needed JMB582/JMB585 32-bit DMA quirk (Mario)
- Enable SATA LED presence indication in sata_mv (Carlos)
- Re-enable FBS after error handling on a port multiplier (Kyrylo)
- Fix NO_FUA quirks shadowed by earlier quirk entries (me)
- Do not overwrite the Marvell PATA quirk port mask in ahci (zhoumin)
- Ignore libata.force transfer modes the host does not support (Rand)
- Fix a race between IRQ deferral and ata_sff_flush_pio_task() (me)
* tag 'ata-7.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: (26 commits)
ata: libata-sff: fix race between IRQ deferral and ata_sff_flush_pio_task()
ata: libata-core: Ignore forced transfer modes the host does not support
ata: ahci: preserve preset port masks
ata: libata-core: Fix NO_FUA quirks shadowed by earlier quirk entries
ata: libahci: re-enable FBS after error handling on a port multiplier
ata: sata_mv: enable SoC SATA LED presence indication
ata: libata: Fix scsi_done() documentation
Revert "ata: ahci: force 32-bit DMA for JMicron JMB582/JMB585"
ata: pata_parport: fix parport attach idr_alloc for
ata: libata-sff: replace kmap_atomic() with kmap_local_page()
ata: libata-scsi: abort multi-sector pass-through commands when multi_count is 0
ata: pata_arasan_cf: use standard DMA engine API
ata: sata_dwc_460ex: Don't enable interrupt if libATA core registration fails
ata: libata-core: Fix the ata_host_register() kdoc
ata: libata: Do not leave ata_host_stop() registered when activation fails
ata: libahci: Free the IRQs when activating a multi-IRQ host fails
ata: sata_fsl: Fix use-after-free of host_priv on probe() failure
ata: ahci_st: Assert the power down reset in the probe() error path
ata: ahci_st: Do not ignore errors when getting the reset controls
ata: sata_inic162x: remove dangerous broken driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux
Pull more i2c updates from Andi Shyti:
"This introduces dynamic transfer timeouts in the I2C core, already
used by qcom-geni. Alongside some driver improvements and fixes, it
also brings in the Rust I2C pull request.
Core:
- core, qcom-geni: add and use a dynamic timeout helper
- acpi: fix adapter reference leak when creating I2C clients
Drivers:
- imx: support reversed address direction and no-start transfers
- designware: queue block data reads once length is known
- mt7621: skip the second data register for chunks up to 4 bytes
- sh_mobile: ensure IRQs are freed before unmapping registers
Rust:
- Remove unsound device-to-client reference conversion"
* tag 'i2c-7.4-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux:
i2c: sh_mobile: request IRQs after mapping registers
i2c: imx: add I2C_M_REV_DIR_ADDR and I2C_M_NOSTART
i2c: mt7621: fix copying uninitialized kernel stack with reduced page_len
i2c: designware: queue only one read command for block reads
i2c: acpi: Fix adapter reference leak in i2c_acpi_new_device_by_fwnode()
i2c: qcom-geni: Add dynamic transfer timeout based on transfer length and frequency
i2c: core: Add i2c_update_timeout() helper for dynamic transfer timeouts
rust: i2c: remove TryFrom<&Device> implementation for &I2cClient
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Make parent-lock requirements per device type instead of per bus,
fixing a use-after-free on USB disconnect by limiting the requirement
to USB interfaces, which retain a reference to their parent
- Honor parent-lock requirements during deferred and asynchronous
probing, fixing USB interface probe races, including duplicate
endpoint creation attempts in sysfs
* tag 'driver-core-7.4-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
driver core: take parent lock in async device attach
driver core: take parent lock on deferred probe
driver core: fix parent lock use-after-free on USB disconnect
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Axiado AX3000 and AX3005 PWM fan controller
- AX3000/AX3005 TSADC
- HONOR FMI-XX
- Minisforum UM780 XTX EC monitoring and fan control
- pmbus: MAX20826, MAX20855B, MAX20908, MAX20912, MAX20826, and
MAX20916
- pmbus: Infineon TDA38740/TDA38725
Added support to existing drivers:
- asus-ec-sensors: ROG STRIX X670E-A GAMING WIFI and ROG STRIX Z490-A
GAMING
- asus_rog_ryujin: ROG Ryujin III 360
- dell-smm: Dell 16 DC16250, Dell OptiPlex 7090, Dell Precision 3650
Tower, Add Latitude 5420
- it87: IT8613E
- k10temp: 1ah/80h devices. Drop support for Hygon devices (support
to be re-added with separate patches later)
- lm63: Sensylink CTF2301
- nct6683: MSI MAG B550M MORTAR MAX WIFI, MSI MAG B650 TOMAHAWK WIFI,
MSI MAG B650M MORTAR WIFI (MS-7D76), and MSI MAG B850M MORTAR WIFI
- nct6775: NCT6122D and NCT6126D
- pmbus/isl68137: Renesas RAA229639 and RAA229640
- pmbus/max34440: ADPM12300
- pmbus/tps25990: TPS1689
- pmbus/tps53679: TPS53622, TPS53659 and TPS536C7
- pmbus/xdpe1a2g7b: xdpe1a2g7c
- sht4x: Sensirion STS4x
- socfpga: Agilex 5
- yogafan: Lenovo Yoga Pro 9 16IMH9, Yoga 14cACN 2021, IdeaPad 3
15ALC6 Ub, Yoga 740-15IML
Core updates:
- Support for currX_emergency and inX_[l]emergency attributes
Notable bug fixes and changes:
- Add missing locks to corsair-cpro, ftsteutates, nct7904, and
npcm750-pwm-fan drivers
- Fix jiffies wraparound in tmp102 and tmp108 drivers
- Documentation updates (document missing chip support, typo fixes,
clarifications)
- pmbus/ltc4286: Add writable shunt_resistor sysfs attribute
- coretemp: Document sysfs numbering and label meaning, fix handling
of isolated SMT siblings, read TjMax only when refreshing the
temperature, refresh the temperature on the first read, and return
-ENODATA for invalid temperature readings
- spd5118: Avoid probing when 16-bit addressing is enabled, and
select page 0 unconditionally during probe
- arctic_fan_controller: Default PWM cache to MCU 40%, Dual-license
GPL-2.0-or-later OR BSD-2-Clause, and update maintainer address
Various other minor bug fixes and improvements"
* tag 'hwmon-for-v7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (97 commits)
hwmon: (npcm750-pwm-fan) serialize PWM register updates
hwmon: (nct7904) serialise the watchdog and sensors
hwmon: (ftsteutates) serialise the watchdog and sensors
hwmon: (acpi_power_meter) Fix 18.45 TW bug
hwmon: (sht3x) Return the consumed count for heater writes
hwmon: (mcp9982) Update the interval cache only after successful writes
hwmon: (gigabyte_waterforce) reject short input reports
hwmon: (coretemp) Fix handling of isolated SMT siblings
hwmon: (coretemp) Document sysfs numbering and label meaning
hwmon: (asus_wmi_sensors) Reword BIOS upgrade advice
hwmon: Replace __MODULE_STRING() with __stringify()
hwmon:(pmbus/xdpe1a2g7b) Add support for xdpe1a2g7c controller
dt-bindings: trivial-devices: Add support for XDPE1A2G7C
hwmon: (pmbus/isl68137) Add Renesas RAA229639 and RAA229640
dt-bindings: hwmon: pmbus/isl68137: Add Renesas RAA229639 and RAA229640
hwmon: (coretemp) Read TjMax only when refreshing the temperature
hwmon: (pmbus/ibm-cffps) Avoid format truncation warnings
hwmon: (dell-smm) Add Dell 16 DC16250 to fan control whitelist
hwmon: (nct6683) Add more MSI boards to list of tested boards
hwmon: (nct6683) Add MSI B850M to list of tested boards
...
|
|
Pull CXL updates from Dave Jiang:
"The headline item is the first part of support for Dynamic Capacity
Devices (DCD). It covers flagging DCD support in the mailbox, reading
the dynamic capacity configuration from the device, gathering DSMAS
data for the DCD partitions, and configuring the dynamic capacity
interrupts. It also adds a documentation update and a cleanup that
enforces partition ordering. DCD is not enabled yet with these code
changes. Patches are applied to reduce the whole set in order to
relief the burden of very large patch set review.
Zero sized HDM decoders are now allowed, along with cxl_test support
for them. There is also a set of decoder hardening patches for switch
decoder enumeration. Latency calculations now account for link width
and use consistent units. The GPF timeout programming has been
reworked. The pull also has a number of misc patches.
A large number of bug fixes against pre-existing issues make up the
rest of the pull. Many of these were flagged by review of patches
posted to the mailing list by sashiko.
Also adding Richard Cheng as a reviewer (R) to the CXL sub-system"
* tag 'cxl-for-7.4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (49 commits)
cxl/events: Test CME counter expiry with equality, not bitwise AND
Documentation/cxl: Document DPA partition layout and ordering rules
cxl/core: Enforce partition order/simplify partition calls
cxl/mem: Configure dynamic capacity interrupts
cxl/pci: Factor out interrupt policy check
cxl/events: Split event msgnum configuration from irq setup
cxl/cdat: Gather DSMAS data for DCD partitions
cxl/mem: Read dynamic capacity configuration from the device
cxl/mbox: Flag support for Dynamic Capacity Devices (DCD)
cxl/acpi: Convert QTG _DSM latencies to picoseconds
cxl: Account for link width in latency calculation
cxl/port: Convert PCIe link latency to nanoseconds
cxl/pci: Update only the Port GPF timeout fields
cxl/pci: Program the Port GPF timeouts before caching the DVSEC
cxl/pci: Use the Device GPF DVSEC for restricted endpoints
cxl/port: Attach endpoints to a dport under the lock that pins it
cxl/core: Hold the dport host lock across dport lookup and use
cxl/port: Clear cached dport pointers when a dport is removed
cxl/region: Warn on user region position mismatch
cxl/acpi: Check ACPI companion before use
...
|
|
vfs_fallocate() and remap_verify_area() pass 64-bit lengths to
fsnotify_file_area_perm(), which truncates them to size_t on
32-bit systems.
Use 64 bit (unsigned) types throughout the entire pre-content
notification chain to keep the full range. The userspace range
field is already 64-bits.
Fixes: 9740d17162de ("fsnotify: pass optional file access range in pre-content event")
Signed-off-by: Avi Weiss <thnkslprpt@gmail.com>
Link: https://patch.msgid.link/20261015175701.3674449-1-thnkslprpt@gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
On some systems, a tmpfs backed rootfs is extensively used throughout
system's lifecycle. tmpfs quotas are needed to limit per user rootfs
usage. However, booting with CONFIG_TMPFS_QUOTA=y, an initramfs, no root=
and "initramfs_options=usrquota" panics at boot:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:dqget+0x1ac/0x490
Call Trace:
__dquot_initialize
dquot_initialize
shmem_get_inode
shmem_fill_super
...
mnt_init
vfs_caches_init
start_kernel
The rootfs is mounted from mnt_init(), but the dquot hash table and
cache are only set up later by dquot_init(), an fs_initcall. Creating
the root inode of a quota enabled rootfs thus dereferences the NULL
dquot_hash in dqget().
Rename dquot_init() to dquot_cache_init() and call it from
vfs_caches_init() before mnt_init(). The slab, percpu and early
workqueue code it relies on is available there, and the workqueue
rescuer and shrinker debugfs entries are set up later by their own
subsystems. Keep the sysctl registration in an fs_initcall, as done
for the dcache, inode and mount sysctls. This only moves existing
allocations earlier in boot.
Fixes: 278033a225e1 ("fs: Add 'initramfs_options' to set initramfs mount options")
Cc: stable@vger.kernel.org
Assisted-by: LLM
Co-developed-by: Dylan Johnson <dgj@amazon.com>
Signed-off-by: Dylan Johnson <dgj@amazon.com>
Signed-off-by: YouYou Yu <youyouyu@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Link: https://patch.msgid.link/20261021181217.20171-1-youyouyu@amazon.com
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add a 'lazyio' mount option to the kernel Ceph client that enables
LazyIO globally for all regular file opens on a mount. This is the
kclient equivalent of the 'client_force_lazyio=true' config option
in the ceph-fuse userspace client.
When 'lazyio' is specified, CEPH_FILE_MODE_LAZY is automatically
added to every regular file's fmode at open time in ceph_open() and
ceph_atomic_open(), causing the I/O paths to request
CEPH_CAP_FILE_LAZYIO from the MDS. This permits buffered I/O via
the page cache even when multiple clients have the file open for
write — beneficial for HPC workloads that can tolerate relaxed
cache coherency.
The mount option is exposed as 'lazyio' / 'nolazyio' via the VFS
fsparam_flag_no mechanism and supports remount.
Link: https://tracker.ceph.com/issues/77594
Signed-off-by: Xiubo Li <xiubo.li@clyso.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Inline data support has been deprecated in the CephFS MDS and is
being formally removed. Existing inline data can be migrated to
data pool objects via MDS scrub (see PR #44359).
Add CONFIG_CEPH_FS_INLINE_DATA (default n) to gate all inline data
code in the kclient. When disabled, CEPH_FEATURE_MDS_INLINE_DATA is
not advertised to the MDS, which will then refuse to open files that
still have inline data, returning -EPERM and preventing silent data
corruption that would occur if the kclient tried to read inline data
from OSD objects that do not contain it.
The conditional compilation is centralized in fs/ceph/super.h, where
static inline helpers make all the inline data code compile out
cleanly when the option is disabled, so that removing the option
later only touches that one place. ceph_inline_version() returns
CEPH_INLINE_NONE when the option is disabled, which makes every
version comparison in the disabled build constant-fold to false;
the stubbed out ceph_uninline_data() and ceph_fill_inline_data() are
then unreachable.
The MDS still carries inline_version + inline_data on the wire, so
the reply and cap grant parsers keep consuming those fields even
with the option disabled, only skipping them, to keep the decode
pointer in sync for the fields that follow.
This config option will be kept for a transitional period to
allow existing CephFS deployments to migrate inline data via
MDS scrub. Once the migration period ends, the option and all
inline data code will be permanently removed.
Users upgrading from an older Ceph release should ensure all inline
data has been migrated before deploying a kclient with this option
disabled:
1. Enable and run MDS scrub to uninline existing data
2. Disable inline_data on the filesystem:
ceph fs set <fs> inline_data false --yes-i-really-really-mean-it
Link: https://tracker.ceph.com/issues/67769
Signed-off-by: Xiubo Li <xiubo.li@clyso.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
* kvm-arm64/cross-vcpu-sync:
: \
: Fix a number of issues related to publication of state when a vcpu
: is forced out of the guest, address other problems related to the
: nesting and overhead of pausing the VM, and apply all of that to
: some of the nasty corners of the VGIC handling.
:
: This eventually simplifies the handling of operations that are
: inherently racy by pausing the involved vcpus.
: /
KVM: arm64: vgic-its: Remove the pending state of a discarded LPI
KVM: arm64: vgic-its: Don't map an LPI from more than one event
KVM: arm64: vgic-its: Stop the VM when handling MOVALL
KVM: arm64: vgic: Stop the target vcpu when disabling LPIs
KVM: arm64: Add helpers to halt a vCPU
KVM: arm64: Turn vcpu->arch.pause into a counter
KVM: arm64: Move IN_GUEST_MODE ahead of state being loaded
KVM: arm64: Move OUTSIDE_GUEST_MODE publication past context being saved
KVM: arm64: nv: Move L2->L1 switch on interrupt early
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
