| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fix from Bjorn Helgaas:
- Add a pci_free_irq_vectors() stub to fix a build issue when
CONFIG_PCI is not set (Boqun Feng)
* tag 'pci-v6.19-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI: Provide pci_free_irq_vectors() stub
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an error path memory leak in the energy model management
code, fix a kerneldoc comment in it, and fix and revamp the energy
model YNL specification added recently along with the new energy model
management netlink interface (that received feedback after being
added):
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)"
* tag 'pm-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
|
|
The irq_chip_pm_put() return value is only used in __irq_do_set_handler()
to trigger a WARN_ON() if it is negative, but doing so is not useful
because irq_chip_pm_put() simply passes the pm_runtime_put() return value
to its callers.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
For this reason, modify irq_chip_pm_put() to discard the pm_runtime_put()
return value, change its return type to void, and drop the WARN_ON()
around the irq_chip_pm_put() invocation from __irq_do_set_handler().
Also update the irq_chip_pm_put() kerneldoc comment to be more accurate.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/5075294.31r3eYUQgx@rafael.j.wysocki
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/ce0acfe2-9c1a-42b7-8782-f1e7f34b8544@linux.intel.com
|
|
Now since all .assert_callback() implementations have been removed from the
controller drivers, drop the .assert_callback callback from pci.h.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-14-9d26da3ce903@oss.qualcomm.com
|
|
To fix bridge resource allocation issues when powering PCI bridges with the
pwrctrl driver, introduce APIs to explicitly power on and off all related
devices simultaneously.
Previously, the individual pwrctrl drivers powered on/off the PCI devices
autonomously, without any control from the controller drivers. But to
enforce ordering with respect to powering on the devices, these APIs will
power on/off all the devices at the same time.
The pci_pwrctrl_power_on_devices() API recursively scans the PCI child
nodes, makes sure that pwrctrl drivers are bound to devices, and calls
their power_on() callbacks. If any pwrctrl driver is not bound, it will
return -EPROBE_DEFER.
Similarly, pci_pwrctrl_power_off_devices() API powers off devices
recursively via their power_off() callbacks.
These APIs are expected to be called during the controller probe and
suspend/resume time to power on/off the devices. But before calling these
APIs, the pwrctrl devices should be created using the
pci_pwrctrl_{create/destroy}_devices() APIs.
Co-developed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-11-9d26da3ce903@oss.qualcomm.com
|
|
Previously, the PCI core created pwrctrl devices during pci_scan_device()
on its own and then skipped enumeration of those devices, hoping the
pwrctrl driver would power them on and trigger a bus rescan.
This approach works for endpoint devices directly connected to Root Ports,
but it fails for PCIe switches acting as bus extenders. When the switch
requires pwrctrl support and the pwrctrl driver is not available during
the pwrctrl device creation, its enumeration will be skipped during the
initial PCI bus scan.
This premature scan leads the PCI core to allocate resources (bridge
windows, bus numbers) for the upstream bridge based on available downstream
buses at scan time. For non-hotplug capable bridges, PCI core typically
allocates resources based on the number of buses available during the
initial bus scan, which happens to be just one if the switch is not powered
on and enumerated at that time. When the switch gets enumerated later on,
it will fail due to the lack of upstream resources.
As a result, a PCIe switch powered on by the pwrctrl driver cannot be
reliably enumerated currently. Either the switch has to be enabled in the
bootloader or the switch pwrctrl driver has to be loaded during the pwrctrl
device creation time to work around these issues.
Introduce new APIs to explicitly create and destroy pwrctrl devices from
controller drivers by recursively scanning the PCI child nodes of the
controller. These APIs allow creating pwrctrl devices based on the original
criteria and are intended to be called during controller probe and removal.
These APIs, together with the upcoming APIs for power on/off will allow the
controller drivers to power on all the devices before starting the initial
bus scan, thereby solving the resource allocation issue.
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
[mani: splitted the patch, cleaned up the code, and rewrote description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-10-9d26da3ce903@oss.qualcomm.com
|
|
To allow the pwrctrl core to control the power on/off sequences of the
pwrctrl drivers, add the 'struct pci_pwrctrl::power_{on/off}' callbacks and
populate them in the respective pwrctrl drivers.
The pwrctrl drivers still power on the resources on their own now. So there
is no functional change.
Co-developed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115-pci-pwrctrl-rework-v5-9-9d26da3ce903@oss.qualcomm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a bit larger than wished for, often seen as a bump at the
middle, but almost all changes are small device-specific fixes, so the
risk must be pretty low.
- SoundWire fix for missing symbol export
- Fixes for device-tree bindings
- A fix for OOB access in USB-audio, spotted by fuzzer
- Quirks for HD-audio, SoundWire, AMD ACP
- A series of ASoC tlv320 and wsa codec fixes
- Other misc fixes in PCM OSS error-handling, Cirrus scodec test,
ASoC ops endianess, davinci, simple-card, and tegra"
* tag 'sound-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/tas2781: Add newly-released HP laptop
ASoC: rt5640: Fix duplicate clock properties in DT binding
ALSA: hda/realtek: Add quirk for HP Pavilion x360 to enable mute LED
ASoC: tlv320adcx140: fix word length
ASoC: tlv320adcx140: Propagate error codes during probe
ASoC: tlv320adcx140: fix null pointer
ASoC: tlv320adcx140: invert DRE_ENABLE
ASoC: sdw_utils: cs42l43: Enable Headphone pin for LINEOUT jack type
ASoC: sdw_utils: Call init callbacks on the correct codec DAI
soundwire: Add missing EXPORT for sdw_slave_type
ALSA: usb-audio: Prevent excessive number of frames
ALSA: hda/cirrus_scodec_test: Fix test suite name
ALSA: hda/cirrus_scodec_test: Fix incorrect setup of gpiochip
ALSA: hda/realtek: Add quirk for Asus Zephyrus G14 2025 using CS35L56, fix speakers
ASoC: amd: yc: Fix microphone on ASUS M6500RE
ASoC: tegra: Revert fix for uninitialized flat cache warning in tegra210_ahub
ASoC: dt-bindings: rockchip-spdif: Allow "port" node
ASoC: dt-bindings: realtek,rt5640: Allow 7 for realtek,jack-detect-source
ASoC: dt-bindings: realtek,rt5640: Add missing properties/node
ASoC: dt-bindings: realtek,rt5640: Document port node
...
|
|
When creating containers the setup usually involves using CLONE_NEWNS
via clone3() or unshare(). This copies the caller's complete mount
namespace. The runtime will also assemble a new rootfs and then use
pivot_root() to switch the old mount tree with the new rootfs. Afterward
it will recursively umount the old mount tree thereby getting rid of all
mounts.
On a basic system here where the mount table isn't particularly large
this still copies about 30 mounts. Copying all of these mounts only to
get rid of them later is pretty wasteful.
This is exacerbated if intermediary mount namespaces are used that only
exist for a very short amount of time and are immediately destroyed
again causing a ton of mounts to be copied and destroyed needlessly.
With a large mount table and a system where thousands or ten-thousands
of containers are spawned in parallel this quickly becomes a bottleneck
increasing contention on the semaphore.
Extend open_tree() with a new OPEN_TREE_NAMESPACE flag. Similar to
OPEN_TREE_CLONE only the indicated mount tree is copied. Instead of
returning a file descriptor referring to that mount tree
OPEN_TREE_NAMESPACE will cause open_tree() to return a file descriptor
to a new mount namespace. In that new mount namespace the copied mount
tree has been mounted on top of a copy of the real rootfs.
The caller can setns() into that mount namespace and perform any
additionally required setup such as move_mount() detached mounts in
there.
This allows OPEN_TREE_NAMESPACE to function as a combined
unshare(CLONE_NEWNS) and pivot_root().
A caller may for example choose to create an extremely minimal rootfs:
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
This will create a mount namespace where "wootwoot" has become the
rootfs mounted on top of the real rootfs. The caller can now setns()
into this new mount namespace and assemble additional mounts.
This also works with user namespaces:
unshare(CLONE_NEWUSER);
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
which creates a new mount namespace owned by the earlier created user
namespace with "wootwoot" as the rootfs mounted on top of the real
rootfs.
Link: https://patch.msgid.link/20251229-work-empty-namespace-v1-1-bfb24c7b061f@kernel.org
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Insert Soft Reserved memory into a dedicated soft_reserve_resource tree
instead of the iomem_resource tree at boot. Delay publishing these ranges
into the iomem hierarchy until ownership is resolved and the HMEM path
is ready to consume them.
Publishing Soft Reserved ranges into iomem too early conflicts with CXL
hotplug and prevents region assembly when those ranges overlap CXL
windows.
Follow up patches will reinsert Soft Reserved ranges into iomem after CXL
window publication is complete and HMEM is ready to claim the memory. This
provides a cleaner handoff between EFI-defined memory ranges and CXL
resource management without trimming or deleting resources later.
In the meantime "Soft Reserved" resources will no longer appear in
/proc/iomem, only their results. I.e. with "memmap=4G%4G+0xefffffff"
Before:
100000000-1ffffffff : Soft Reserved
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
After:
100000000-1ffffffff : dax1.0
100000000-1ffffffff : System RAM (kmem)
The expectation is that this does not lead to a user visible regression
because the dax1.0 device is created in both instances.
Co-developed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
[Smita: incorporate feedback from x86 maintainer review]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Link: https://patch.msgid.link/20251120031925.87762-2-Smita.KoralahalliChannabasappa@amd.com
[djbw: cleanups and clarifications]
Link: https://lore.kernel.org/69443f707b025_1cee10022@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
attribute_container_register() has always returned 0 since its
introduction in commit 06ff5a987e ("Add attribute container to generic
device model") in the historical Linux tree [1]. Convert the return type
to void and update all callers.
This removes dead code where callers checked for errors that could never
occur.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git [1]
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Link: https://patch.msgid.link/20251220-dev-attribute-container-linux-scsi-v1-1-d58fcd03bf21@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice
indices above 15. Currently, the only in-tree COMEDI drivers that
support more than 16 subdevices are the "8255" driver and the
"comedi_bond" driver. Making the ioctl work for subdevice indices up to
255 is achievable. It needs minor changes to the handling of the
`COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly
harmless to user-space, apart from making them less broken. Details
follow...
The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges
(usually with units of volts or milliamps) for a COMEDI subdevice or
channel. (Only some subdevices have per-channel range tables, indicated
by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a
`range_type` value and a user-space pointer, both supplied by
user-space, but the `range_type` value should match what was obtained
using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel
range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a
single range table for all channels). Bits 15 to 0 of the `range_type`
value contain the length of the range table, which is the only part that
user-space should care about (so it can use a suitably sized buffer to
fetch the range table). Bits 23 to 16 store the channel index, which is
assumed to be no more than 255 if the subdevice has per-channel range
tables, and is set to 0 if the subdevice has a single range table. For
`range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to
24 contain the subdevice index, which is assumed to be no more than 255.
But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl,
bits 27 to 24 contain the subdevice index, which is assumed to be no
more than 15, and bits 31 to 28 contain the COMEDI device's minor device
number for some unknown reason lost in the mists of time. The
`COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the
user-supplied `range_type` value, extracts the channel index from bits
23 to 16 (only used if the subdevice has per-channel range tables),
extracts the subdevice index from bits 27 to 24, and ignores bits 31 to
28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or
`COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't
work with the `COMEDI_RANGEINFO` ioctl. It will either get the range
table for the subdevice index modulo 16, or will fail with `-EINVAL`.
To fix this, always use bits 31 to 24 of the `range_type` value to hold
the subdevice index (assumed to be no more than 255). This affects the
`COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be
anything in user-space that depends on the old, broken usage, although
it may now see different values in bits 31 to 28 of the `range_type`
values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have
per-channel subdevices. User-space should not be trying to decode bits
31 to 16 of the `range_type` values anyway.
Fixes: ed9eccbe8970 ("Staging: add comedi core")
Cc: stable@vger.kernel.org #5.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251203162438.176841-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This script
#!/usr/bin/bash
echo 0 > /proc/sys/kernel/randomize_va_space
echo 'void main(void) {}' > TEST.c
# -fcf-protection to ensure that the 1st endbr32 insn can't be emulated
gcc -m32 -fcf-protection=branch TEST.c -o test
bpftrace -e 'uprobe:./test:main {}' -c ./test
"hangs", the probed ./test task enters an endless loop.
The problem is that with randomize_va_space == 0
get_unmapped_area(TASK_SIZE - PAGE_SIZE) called by xol_add_vma() can not
just return the "addr == TASK_SIZE - PAGE_SIZE" hint, this addr is used
by the stack vma.
arch_get_unmapped_area_topdown() doesn't take TIF_ADDR32 into account and
in_32bit_syscall() is false, this leads to info.high_limit > TASK_SIZE.
vm_unmapped_area() happily returns the high address > TASK_SIZE and then
get_unmapped_area() returns -ENOMEM after the "if (addr > TASK_SIZE - len)"
check.
handle_swbp() doesn't report this failure (probably it should) and silently
restarts the probed insn. Endless loop.
I think that the right fix should change the x86 get_unmapped_area() paths
to rely on TIF_ADDR32 rather than in_32bit_syscall(). Note also that if
CONFIG_X86_X32_ABI=y, in_x32_syscall() falsely returns true in this case
because ->orig_ax = -1.
But we need a simple fix for -stable, so this patch just sets TS_COMPAT if
the probed task is 32-bit to make in_ia32_syscall() true.
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Paulo Andrade <pandrade@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/aV5uldEvV7pb4RA8@redhat.com/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/aWO7Fdxn39piQnxu@redhat.com
|
|
Some resources can be removed asynchronously, for example, resources
provided by a hot-pluggable device like USB. When holding a reference
to such a resource, it's possible for the resource to be removed and
its memory freed, leading to use-after-free errors on subsequent access.
The "revocable" mechanism addresses this by establishing a weak reference
to a resource that might be freed at any time. It allows a resource
consumer to safely attempt to access the resource, guaranteeing that the
access is valid for the duration of its use, or it fails safely if the
resource has already been revoked.
The implementation uses a provider/consumer model built on Sleepable
RCU (SRCU) to guarantee safe memory access:
- A resource provider, such as a driver for a hot-pluggable device,
allocates a struct revocable_provider and initializes it with a pointer
to the resource.
- A resource consumer that wants to access the resource allocates a
struct revocable which acts as a handle containing a reference to the
provider.
- To access the resource, the consumer uses revocable_try_access().
This function enters an SRCU read-side critical section and returns
the pointer to the resource. If the provider has already freed the
resource, it returns NULL. After use, the consumer calls
revocable_withdraw_access() to exit the SRCU critical section. The
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED() are
convenient helpers for doing that.
- When the provider needs to remove the resource, it calls
revocable_provider_revoke(). This function sets the internal resource
pointer to NULL and then calls synchronize_srcu() to wait for all
current readers to finish before the resource can be completely torn
down.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
|
|
Pull 6.19-devel branch for applying cirrus scodec test patches.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add a control V4L2_CID_FLASH_STROBE_OE to en- or disable the
strobe output of v4l2 devices (most likely sensors).
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add a V4L2_CID_FLASH_DURATION control to set the duration of a
flash/strobe pulse. This controls the length of the flash/strobe pulse
output by device (typically a camera sensor) and connected to the flash
controller. This is different to the V4L2_CID_FLASH_TIMEOUT control,
which is implemented by the flash controller and defines a limit after
which the flash is "forcefully" turned off again.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Without exception all caller do that. So move the allocation into the
helper.
This reduces boilerplate and removes unnecessary error checking.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260115122341.556026-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add reference counting to queues. When all queues are occupied, tfm
will reuse queues with the same algorithm type that have already
been allocated in the kernel. The corresponding queue will be
released when the reference count reaches 1.
Reviewed-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Consolidate the creation and start of qp into the function
hisi_qm_alloc_qps_node. This change eliminates the need for
each module to perform these steps in two separate phases
(creation and start).
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When a single queue used by multiple tfms, the protection of shared
resources by individual module driver programs is no longer
sufficient. The hisi_qp_send needs to be ensured by the lock in qp.
Fixes: 5fdb4b345cfb ("crypto: hisilicon - add a lock for the qp send operation")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Originally, when a queue was requested, it could only be configured
with the default algorithm type of 0. Now, when multiple tfms use
the same queue, the queue must be selected based on its attributes
to meet the requirements of tfm tasks. So the algorithm type
attribute of queue need to be distinguished. Just like a queue used
for compression in ZIP cannot be used for decompression tasks.
Fixes: 3f1ec97aacf1 ("crypto: hisilicon/qm - Put device finding logic into QM")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
for callback
When multiple tfm use a same qp, the backlog data should be managed
centrally by the qp, rather than in the qp_ctx of each req.
Additionally, since SEC_BD_TYPE1 and SEC_BD_TYPE2 cannot use the
tag of the sqe to carry the virtual address of the req, the sent
sqe is stored in the qp. This allows the callback function to get
the req address. To handle the differences between hardware types,
the callback functions are split into two separate implementations.
Fixes: f0ae287c5045 ("crypto: hisilicon/sec2 - implement full backlog mode for sec")
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
No user of PHY fixups unregisters these. IOW: The fixup unregistering
functions are unused and can be removed. Remove also documentation
for these functions. Whilst at it, remove also mentioning of
phy_register_fixup() from the Documentation, as this function has been
static since ea47e70e476f ("net: phy: remove fixup-related definitions
from phy.h which are not used outside phylib").
Fixup unregistering functions were added with f38e7a32ee4f
("phy: add phy fixup unregister functions") in 2016, and last user
was removed with 6782d06a47ad ("net: usb: lan78xx: Remove KSZ9031 PHY
fixup") in 2024.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/ff8ac321-435c-48d0-b376-fbca80c0c22e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Remove unused KEEP_ACTIVE flag in the new multi queue uAPI (Niranjana)
- Expose new temperature attributes in HWMON (Karthik)
Driver Changes:
- Force i2c into polling mode when in survivability (Raag)
- Validate preferred system memory placement in xe_svm_range_validate (Brost)
- Adjust page count tracepoints in shrinker (Brost)
- Fix a couple drm_pagemap issues with multi-GPU (Brost)
- Define GuC firmware for NVL-S (Roper)
- Handle GT resume failure (Raag)
- Improve wedged mode handling (Lukasz)
- Add missing newlines to drm_warn messages (Osama)
- Fix WQ_MEM_RECLAIM passed as max_active to alloc_workqueue (Marco)
- Page-reclaim fixes and PRL stats addition (Brian)
- Fix struct guc_lfd_file_header kernel-doc (Jani)
- Allow compressible surfaces to be 1-way coherent (Xin)
- Fix DRM scheduler layering violations in Xe (Brost)
- Minor improvements to MERT code (Michal)
- Privatize struct xe_ggtt_node (Maarten)
- Convert wait for lmem init into an assert (Bala)
- Enable GSC loading and PXP for PTL (Daniele)
- Replace use of system_wq with tlb_inval->timeout_wq (Marco)
- VRAM addr range bit expansion (Fei)
- Cleanup unused header includes (Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkSxRQK7VhTlP32@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Vinod Koul says:
====================
phy common properties
Introduce "rx-polarity" and "tx-polarity" device tree properties
with Kunit tests (from Vladimir Oltean).
* tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: add phy_get_rx_polarity() and phy_get_tx_polarity()
dt-bindings: phy-common-props: RX and TX lane polarity inversion
dt-bindings: phy-common-props: ensure protocol-names are unique
dt-bindings: phy-common-props: create a reusable "protocol-names" definition
dt-bindings: phy: rename transmit-amplitude.yaml to phy-common-props.yaml
====================
Link: https://patch.msgid.link/aWeXvFcGNK5T6As9@vaman
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document that the 'len' field in ethtool_gstrings and 'n_stats' field in
ethtool_stats optionally serve dual purposes: on entry they specify the
number of items requested, and on return they indicate the number
actually returned (which is not necessarily the same).
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260115060544.481550-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Beyond Display:
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkNThVRSkGAfUVv@intel.com
|
|
Cross-merge networking fixes after downstream PR (net-6.19-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- atomic: Introduce Gamma/Degamma LUT size check
- gem: Fix a leak in drm_gem_get_unmapped_area
- gpuvm: API sanitation for Rust bindings
- panic: Few corner-cases fixes
Driver Changes:
- Replace system workqueue with percpu equivalent
- amdxdna: Update message buffer allocation requirements, Update
firmware version check
- imagination: Add AM62P support
- ivpu: Implement warm boot flow
- rockchip: Get rid of atomic_check fixups, Add Rockchip RK3506 Support
- rocket: Cleanups
- bridge:
- dw-hdmi-qp: Add support for HPD-less setups
- panel:
- mantix: Various power management related improvements
- new panels: Innolux G150XGE-L05,
- dma-buf:
- cma: Call clear_page instead of memset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260115-lilac-dragon-of-opposition-ac0a30@houat
|
|
Currently, the driver's device private data is allocated and initialized
from driver core code called from bus abstractions after the driver's
probe() callback returned the corresponding initializer.
Similarly, the driver's device private data is dropped within the
remove() callback of bus abstractions after calling the remove()
callback of the corresponding driver.
However, commit 6f61a2637abe ("rust: device: introduce
Device::drvdata()") introduced an accessor for the driver's device
private data for a Device<Bound>, i.e. a device that is currently bound
to a driver.
Obviously, this is in conflict with dropping the driver's device private
data in remove(), since a device can not be considered to be fully
unbound after remove() has finished:
We also have to consider registrations guarded by devres - such as IRQ
or class device registrations - which are torn down after remove() in
devres_release_all().
Thus, it can happen that, for instance, a class device or IRQ callback
still calls Device::drvdata(), which then runs concurrently to remove()
(which sets dev->driver_data to NULL and drops the driver's device
private data), before devres_release_all() started to tear down the
corresponding registration. This is because devres guarded registrations
can, as expected, access the corresponding Device<Bound> that defines
their scope.
In C it simply is the driver's responsibility to ensure that its device
private data is freed after e.g. an IRQ registration is unregistered.
Typically, C drivers achieve this by allocating their device private data
with e.g. devm_kzalloc() before doing anything else, i.e. before e.g.
registering an IRQ with devm_request_threaded_irq(), relying on the
reverse order cleanup of devres.
Technically, we could do something similar in Rust. However, the
resulting code would be pretty messy:
In Rust we have to differentiate between allocated but uninitialized
memory and initialized memory in the type system. Thus, we would need to
somehow keep track of whether the driver's device private data object
has been initialized (i.e. probe() was successful and returned a valid
initializer for this memory) and conditionally call the destructor of
the corresponding object when it is freed.
This is because we'd need to allocate and register the memory of the
driver's device private data *before* it is initialized by the
initializer returned by the driver's probe() callback, because the
driver could already register devres guarded registrations within
probe() outside of the driver's device private data initializer.
Luckily there is a much simpler solution: Instead of dropping the
driver's device private data at the end of remove(), we just drop it
after the device has been fully unbound, i.e. after all devres callbacks
have been processed.
For this, we introduce a new post_unbind() callback private to the
driver-core, i.e. the callback is neither exposed to drivers, nor to bus
abstractions.
This way, the driver-core code can simply continue to conditionally
allocate the memory for the driver's device private data when the
driver's initializer is returned from probe() - no change needed - and
drop it when the driver-core code receives the post_unbind() callback.
Closes: https://lore.kernel.org/all/DEZMS6Y4A7XE.XE7EUBT5SJFJ@kernel.org/
Fixes: 6f61a2637abe ("rust: device: introduce Device::drvdata()")
Acked-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20260107103511.570525-7-dakr@kernel.org
[ Remove #ifdef CONFIG_RUST, rename post_unbind() to post_unbind_rust().
- Danilo]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
|
|
Now that all callers of the aes_encrypt() and aes_decrypt() type-generic
macros are using the new types, remove the old functions.
Then, replace the macro with direct calls to the new functions, dropping
the "_new" suffix from them.
This completes the change in the type of the key struct that is passed
to aes_encrypt() and aes_decrypt().
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-35-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-34-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-33-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Switch from the old AES library functions (which use struct
crypto_aes_ctx) to the new ones (which use struct aes_enckey). This
eliminates the unnecessary computation and caching of the decryption
round keys. The new AES en/decryption functions are also much faster
and use AES instructions when supported by the CPU.
Note that in addition to the change in the key preparation function and
the key struct type itself, the change in the type of the key struct
results in aes_encrypt() (which is temporarily a type-generic macro)
calling the new encryption function rather than the old one.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-30-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Move the SPARC64 AES assembly code into lib/crypto/, wire the key
expansion and single-block en/decryption functions up to the AES library
API, and remove the "aes-sparc64" crypto_cipher algorithm.
The result is that both the AES library and crypto_cipher APIs use the
SPARC64 AES opcodes, whereas previously only crypto_cipher did (and it
wasn't enabled by default, which this commit fixes as well).
Note that some of the functions in the SPARC64 AES assembly code are
still used by the AES mode implementations in
arch/sparc/crypto/aes_glue.c. For now, just export these functions.
These exports will go away once the AES mode implementations are
migrated to the library as well. (Trying to split up the assembly file
seemed like much more trouble than it would be worth.)
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20260112192035.10427-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Implement aes_preparekey_arch(), aes_encrypt_arch(), and
aes_decrypt_arch() using the CPACF AES instructions.
Then, remove the superseded "aes-s390" crypto_cipher.
The result is that both the AES library and crypto_cipher APIs use the
CPACF AES instructions, whereas previously only crypto_cipher did (and
it wasn't enabled by default, which this commit fixes as well).
Note that this preserves the optimization where the AES key is stored in
raw form rather than expanded form. CPACF just takes the raw key.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Link: https://lore.kernel.org/r/20260112192035.10427-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Pull NFS client fixes from Trond Myklebust:
- Fix another deadlock involving nfs_release_folio()
- localio:
- Stop I/O upon hitting a fatal error
- Deal with page offsets that are > PAGE_SIZE
- Fix size read races in truncate, fallocate and copy offload
- Several bugfixes for the NFSv4.x directory delegation client code
- pNFS:
- Fix a deadlock when returning delegations during open
- Fix memory leaks in various error paths
* tag 'nfs-for-6.19-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix size read races in truncate, fallocate and copy offload
NFS: Don't immediately return directory delegations when disabled
NFS/localio: Deal with page bases that are > PAGE_SIZE
NFS/localio: Stop further I/O upon hitting an error
NFSv4.x: Directory delegations don't require any state recovery
NFSv4: Don't free slots prematurely if requesting a directory delegation
NFSv4: Fix nfs_clear_verifier_delegated() for delegated directories
NFS: Fix directory delegation verifier checks
pnfs/blocklayout: Fix memory leak in bl_parse_scsi()
pnfs/flexfiles: Fix memory leak in nfs4_ff_alloc_deviceid_node()
NFS: Fix a deadlock involving nfs_release_folio()
pNFS: Fix a deadlock when returning a delegation during open()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
- kerneldoc fixes from Bagas Sanjaya
- DAMON fixes from SeongJae
- mremap VMA-related fixes from Lorenzo
- various singletons - please see the changelogs for details
* tag 'mm-hotfixes-stable-2026-01-15-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (30 commits)
drivers/dax: add some missing kerneldoc comment fields for struct dev_dax
mm: numa,memblock: include <asm/numa.h> for 'numa_nodes_parsed'
mailmap: add entry for Daniel Thompson
tools/testing/selftests: fix gup_longterm for unknown fs
mm/page_alloc: prevent pcp corruption with SMP=n
iommu/sva: include mmu_notifier.h header
mm: kmsan: fix poisoning of high-order non-compound pages
tools/testing/selftests: add forked (un)/faulted VMA merge tests
mm/vma: enforce VMA fork limit on unfaulted,faulted mremap merge too
tools/testing/selftests: add tests for !tgt, src mremap() merges
mm/vma: fix anon_vma UAF on mremap() faulted, unfaulted merge
mm/zswap: fix error pointer free in zswap_cpu_comp_prepare()
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
mm/damon/sysfs-scheme: cleanup quotas subdirs on scheme dir setup failure
mm/damon/sysfs: cleanup attrs subdirs on context dir setup failure
mm/damon/sysfs: cleanup intervals subdirs on attrs dir setup failure
mm/damon/core: remove call_control in inactive contexts
powerpc/watchdog: add support for hardlockup_sys_info sysctl
mips: fix HIGHMEM initialization
mm/hugetlb: ignore hugepage kernel args if hugepages are unsupported
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, can and IPsec.
Current release - regressions:
- net: add net.core.qdisc_max_burst
- can: propagate CAN device capabilities via ml_priv
Previous releases - regressions:
- dst: fix races in rt6_uncached_list_del() and
rt_del_uncached_list()
- ipv6: fix use-after-free in inet6_addr_del().
- xfrm: fix inner mode lookup in tunnel mode GSO segmentation
- ip_tunnel: spread netdev_lockdep_set_classes()
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
- bluetooth: hci_sync: enable PA sync lost event
- eth: virtio-net:
- fix the deadlock when disabling rx NAPI
- fix misalignment bug in struct virtnet_info
Previous releases - always broken:
- ipv4: ip_gre: make ipgre_header() robust
- can: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
- eth:
- mlx5e: profile change fix
- octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
- macvlan: fix possible UAF in macvlan_forward_source()"
* tag 'net-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
virtio_net: Fix misalignment bug in struct virtnet_info
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
net/sched: sch_qfq: do not free existing class in qfq_change_class()
selftests: drv-net: fix RPS mask handling for high CPU numbers
selftests: drv-net: fix RPS mask handling in toeplitz test
ipv6: Fix use-after-free in inet6_addr_del().
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
net: hv_netvsc: reject RSS hash key programming without RX indirection table
tools: ynl: render event op docs correctly
net: add net.core.qdisc_max_burst
net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definition
net: phy: motorcomm: fix duplex setting error for phy leds
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
net/mlx5e: Restore destroying state bit after profile cleanup
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
net/mlx5e: Fix crash on profile change rollback failure
...
|
|
Replace XXX with what it actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the comment for blk_zone_cond_str() by replacing the meaningless
BLK_ZONE_ZONE_XXX comment with the correct BLK_ZONE_COND_name, thus also
replacing the XXX with what that actually means.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Link: https://github.com/acpica/acpica/commit/5cb62a1d4970
Signed-off-by: Michal Camacho Romero <michal.camacho.romero@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3193976.CbtlEUcBR6@rafael.j.wysocki
|
|
Replace TPRn Base and Limit registers with compatible bitmasks for them.
Link: https://github.com/acpica/acpica/commit/be91c5813936
Signed-off-by: Michal Camacho Romero <michal.camacho.romero@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1871109.TLkxdtWsSY@rafael.j.wysocki
|
|
Link: https://github.com/acpica/acpica/commit/446be438238e
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/15657187.tv2OnDr8pf@rafael.j.wysocki
|
|
Align comments in ACPI_TPRN_BASE_REG and ACPI_TPRN_LIMIT_REG structures.
Link: https://github.com/acpica/acpica/commit/95815d550969
Signed-off-by: Michal Camacho Romero <michal.camacho.romero@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2286538.NgBsaNRSFp@rafael.j.wysocki
|
|
Link: https://github.com/acpica/acpica/commit/cc480264335e
Signed-off-by: Michal Camacho Romero <michal.camacho.romero@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2042656.yKVeVyVuyW@rafael.j.wysocki
|
