summaryrefslogtreecommitdiff
path: root/kernel/power
AgeCommit message (Collapse)Author
2016-11-02PM / sleep: fix device reference leak in test_suspendJohan Hovold
Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24PM / suspend: Fix missing KERN_CONT for suspend messageJon Hunter
Commit 4bcc595ccd80 (printk: reinstate KERN_CONT for printing continuation lines) exposed a missing KERN_CONT from one of the messages shown on entering suspend. With v4.9-rc1, the 'done.' shown after syncing the filesystems no longer appears as a continuation but a new message with its own timestamp. [ 9.259566] PM: Syncing filesystems ... [ 9.264119] done. Fix this by adding the KERN_CONT log level for the 'done.' part of the message seen after syncing filesystems. While we are at it, convert these suspend printks to pr_info and pr_cont, respectively. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-07oom, suspend: fix oom_killer_disable vs. pm suspend properlyMichal Hocko
Commit 74070542099c ("oom, suspend: fix oom_reaper vs. oom_killer_disable race") has workaround an existing race between oom_killer_disable and oom_reaper by adding another round of try_to_freeze_tasks after the oom killer was disabled. This was the easiest thing to do for a late 4.7 fix. Let's fix it properly now. After "oom: keep mm of the killed task available" we no longer have to call exit_oom_victim from the oom reaper because we have stable mm available and hide the oom_reaped mm by MMF_OOM_SKIP flag. So let's remove exit_oom_victim and the race described in the above commit doesn't exist anymore if. Unfortunately this alone is not sufficient for the oom_killer_disable usecase because now we do not have any reliable way to reach exit_oom_victim (the victim might get stuck on a way to exit for an unbounded amount of time). OOM killer can cope with that by checking mm flags and move on to another victim but we cannot do the same for oom_killer_disable as we would lose the guarantee of no further interference of the victim with the rest of the system. What we can do instead is to cap the maximum time the oom_killer_disable waits for victims. The only current user of this function (pm suspend) already has a concept of timeout for back off so we can reuse the same value there. Let's drop set_freezable for the oom_reaper kthread because it is no longer needed as the reaper doesn't wake or thaw any processes. Link: http://lkml.kernel.org/r/1472119394-11342-7-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-13PM / Hibernate: allow hibernation with PAGE_POISONING_ZEROAnisse Astier
PAGE_POISONING_ZERO disables zeroing new pages on alloc, they are poisoned (zeroed) as they become available. In the hibernate use case, free pages will appear in the system without being cleared, left there by the loading kernel. This patch will make sure free pages are cleared on resume when PAGE_POISONING_ZERO is enabled. We free the pages just after resume because we can't do it later: going through any device resume code might allocate some memory and invalidate the free pages bitmap. Thus we don't need to disable hibernation when PAGE_POISONING_ZERO is enabled. Signed-off-by: Anisse Astier <anisse@astier.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13PM / sleep: enable suspend-to-idle even without registered suspend_opsSudeep Holla
Suspend-to-idle (aka the "freeze" sleep state) is a system sleep state in which all of the processors enter deepest possible idle state and wait for interrupts right after suspending all the devices. There is no hard requirement for a platform to support and register platform specific suspend_ops to enter suspend-to-idle/freeze state. Only deeper system sleep states like PM_SUSPEND_STANDBY and PM_SUSPEND_MEM rely on such low level support/implementation. suspend-to-idle can be entered as along as all the devices can be suspended. This patch enables the support for suspend-to-idle even on systems that don't have any low level support for deeper system sleep states and/or don't register any platform specific suspend_ops. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-13PM / sleep: Increase default DPM watchdog timeout to 120Chen Yu
Recently we have a new report that, the harddisk can not resume on time due to firmware issues, and got a kernel panic because of DPM watchdog timeout. So adjust the default timeout from 60 to 120 to survive on this platform, and make DPM_WATCHDOG depending on EXPERT. Link: https://bugzilla.kernel.org/show_bug.cgi?id=117971 Suggested-by: Pavel Machek <pavel@ucw.cz> Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Reported-by: Higuita <higuita@gmx.net> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-05PM / QoS: avoid calling cancel_delayed_work_sync() during early bootTejun Heo
of_clk_init() ends up calling into pm_qos_update_request() very early during boot where irq is expected to stay disabled. pm_qos_update_request() uses cancel_delayed_work_sync() which correctly assumes that irq is enabled on invocation and unconditionally disables and re-enables it. Gate cancel_delayed_work_sync() invocation with kevented_up() to avoid enabling irq unexpectedly during early boot. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Qiao Zhou <qiaozhou@asrmicro.com> Link: http://lkml.kernel.org/r/d2501c4c-8e7b-bea3-1b01-000b36b5dfe9@asrmicro.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-18Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Fix rtree_next_node() to avoid walking off list ends x86/power/64: Use __pa() for physical address computation PM / sleep: Update some system sleep documentation
2016-08-16PM / hibernate: Fix rtree_next_node() to avoid walking off list endsJames Morse
rtree_next_node() walks the linked list of leaf nodes to find the next block of pages in the struct memory_bitmap. If it walks off the end of the list of nodes, it walks the list of memory zones to find the next region of memory. If it walks off the end of the list of zones, it returns false. This leaves the struct bm_position's node and zone pointers pointing at their respective struct list_heads in struct mem_zone_bm_rtree. memory_bm_find_bit() uses struct bm_position's node and zone pointers to avoid walking lists and trees if the next bit appears in the same node/zone. It handles these values being stale. Swap rtree_next_node()s 'step then test' to 'test-next then step', this means if we reach the end of memory we return false and leave the node and zone pointers as they were. This fixes a panic on resume using AMD Seattle with 64K pages: [ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds) [ 6.896453] PM: Using 3 thread(s) for decompression. [ 6.896453] PM: Loading and decompressing image data (5339 pages)... [ 7.318890] PM: Image loading progress: 0% [ 7.323395] Unable to handle kernel paging request at virtual address 00800040 [ 7.330611] pgd = ffff000008df0000 [ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000 [ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 7.349825] Modules linked in: [ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737 [ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016 [ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000 [ 7.375020] PC is at set_bit+0x18/0x30 [ 7.378758] LR is at memory_bm_set_bit+0x24/0x30 [ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045 [ 7.390743] sp : ffff8003c0283b00 [ 7.473551] [ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020) [ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000) [ 7.800075] Call trace: [ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30 [ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70 [ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c [ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88 [ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230 [ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90 [ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338 [ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c [ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec [ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc [ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40 [ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22) [ 7.955909] ---[ end trace 0024a5986e6ff323 ]--- [ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Here struct mem_zone_bm_rtree's start_pfn has been returned instead of struct rtree_node's addr as the node/zone pointers are corrupt after we walked off the end of the lists during mark_unsafe_pages(). This behaviour was exposed by commit 6dbecfd345a6 ("PM / hibernate: Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking off the end of the memory bitmap. Fixes: 3a20cb177961 (PM / Hibernate: Implement position keeping in radix tree) Signed-off-by: James Morse <james.morse@arm.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-12Merge branches 'pm-sleep' and 'pm-cpufreq'Rafael J. Wysocki
* pm-sleep: PM / hibernate: Restore processor state before using per-CPU variables x86/power/64: Always create temporary identity mapping correctly * pm-cpufreq: cpufreq: powernv: Fix crash in gpstate_timer_handler()
2016-08-12PM / hibernate: Restore processor state before using per-CPU variablesThomas Garnier
Restore the processor state before calling any other functions to ensure per-CPU variables can be used with KASLR memory randomization. Tracing functions use per-CPU variables (GS based on x86) and one was called just before restoring the processor state fully. It resulted in a double fault when both the tracing & the exception handler functions tried to use a per-CPU variable. Fixes: bb3632c6101b (PM / sleep: trace events for suspend/resume) Reported-and-tested-by: Borislav Petkov <bp@suse.de> Reported-by: Jiri Kosina <jikos@kernel.org> Tested-by: Rafael J. Wysocki <rafael@kernel.org> Tested-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Thomas Garnier <thgarnie@google.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-28mm, vmscan: move LRU lists to nodeMel Gorman
This moves the LRU lists from the zone to the node and related data such as counters, tracing, congestion tracking and writeback tracking. Unfortunately, due to reclaim and compaction retry logic, it is necessary to account for the number of LRU pages on both zone and node logic. Most reclaim logic is based on the node counters but the retry logic uses the zone counters which do not distinguish inactive and active sizes. It would be possible to leave the LRU counters on a per-zone basis but it's a heavier calculation across multiple cache lines that is much more frequent than the retry checks. Other than the LRU counters, this is mostly a mechanical patch but note that it introduces a number of anomalies. For example, the scans are per-zone but using per-node counters. We also mark a node as congested when a zone is congested. This causes weird problems that are fixed later but is easier to review. In the event that there is excessive overhead on 32-bit systems due to the nodes being on LRU then there are two potential solutions 1. Long-term isolation of highmem pages when reclaim is lowmem When pages are skipped, they are immediately added back onto the LRU list. If lowmem reclaim persisted for long periods of time, the same highmem pages get continually scanned. The idea would be that lowmem keeps those pages on a separate list until a reclaim for highmem pages arrives that splices the highmem pages back onto the LRU. It potentially could be implemented similar to the UNEVICTABLE list. That would reduce the skip rate with the potential corner case is that highmem pages have to be scanned and reclaimed to free lowmem slab pages. 2. Linear scan lowmem pages if the initial LRU shrink fails This will break LRU ordering but may be preferable and faster during memory pressure than skipping LRU pages. Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26Merge tag 'pm-4.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "Again, the majority of changes go into the cpufreq subsystem, but there are no big features this time. The cpufreq changes that stand out somewhat are the governor interface rework and improvements related to the handling of frequency tables. Apart from those, there are fixes and new device/CPU IDs in drivers, cleanups and an improvement of the new schedutil governor. Next, there are some changes in the hibernation core, including a fix for a nasty problem related to the MONITOR/MWAIT usage by CPU offline during resume from hibernation, a few core improvements related to memory management during resume, a couple of additional debug features and cleanups. Finally, we have some fixes and cleanups in the devfreq subsystem, generic power domains framework improvements related to system suspend/resume, support for some new chips in intel_idle and in the power capping RAPL driver, a new version of the AnalyzeSuspend utility and some assorted fixes and cleanups. Specifics: - Rework the cpufreq governor interface to make it more straightforward and modify the conservative governor to avoid using transition notifications (Rafael Wysocki). - Rework the handling of frequency tables by the cpufreq core to make it more efficient (Viresh Kumar). - Modify the schedutil governor to reduce the number of wakeups it causes to occur in cases when the CPU frequency doesn't need to be changed (Steve Muckle, Viresh Kumar). - Fix some minor issues and clean up code in the cpufreq core and governors (Rafael Wysocki, Viresh Kumar). - Add Intel Broxton support to the intel_pstate driver (Srinivas Pandruvada). - Fix problems related to the config TDP feature and to the validity of the MSR_HWP_INTERRUPT register in intel_pstate (Jan Kiszka, Srinivas Pandruvada). - Make intel_pstate update the cpu_frequency tracepoint even if the frequency doesn't change to avoid confusing powertop (Rafael Wysocki). - Clean up the usage of __init/__initdata in intel_pstate, mark some of its internal variables as __read_mostly and drop an unused structure element from it (Jisheng Zhang, Carsten Emde). - Clean up the usage of some duplicate MSR symbols in intel_pstate and turbostat (Srinivas Pandruvada). - Update/fix the powernv, s3c24xx and mvebu cpufreq drivers (Akshay Adiga, Viresh Kumar, Ben Dooks). - Fix a regression (introduced during the 4.5 cycle) in the pcc-cpufreq driver by reverting the problematic commit (Andreas Herrmann). - Add support for Intel Denverton to intel_idle, clean up Broxton support in it and make it explicitly non-modular (Jacob Pan, Jan Beulich, Paul Gortmaker). - Add support for Denverton and Ivy Bridge server to the Intel RAPL power capping driver and make it more careful about the handing of MSRs that may not be present (Jacob Pan, Xiaolong Wang). - Fix resume from hibernation on x86-64 by making the CPU offline during resume avoid using MONITOR/MWAIT in the "play dead" loop which may lead to an inadvertent "revival" of a "dead" CPU and a page fault leading to a kernel crash from it (Rafael Wysocki). - Make memory management during resume from hibernation more straightforward (Rafael Wysocki). - Add debug features that should help to detect problems related to hibernation and resume from it (Rafael Wysocki, Chen Yu). - Clean up hibernation core somewhat (Rafael Wysocki). - Prevent KASAN from instrumenting the hibernation core which leads to large numbers of false-positives from it (James Morse). - Prevent PM (hibernate and suspend) notifiers from being called during the cleanup phase if they have not been called during the corresponding preparation phase which is possible if one of the other notifiers returns an error at that time (Lianwei Wang). - Improve suspend-related debug printout in the tasks freezer and clean up suspend-related console handling (Roger Lu, Borislav Petkov). - Update the AnalyzeSuspend script in the kernel sources to version 4.2 (Todd Brandt). - Modify the generic power domains framework to make it handle system suspend/resume better (Ulf Hansson). - Make the runtime PM framework avoid resuming devices synchronously when user space changes the runtime PM settings for them and improve its error reporting (Rafael Wysocki, Linus Walleij). - Fix error paths in devfreq drivers (exynos, exynos-ppmu, exynos-bus) and in the core, make some devfreq code explicitly non-modular and change some of it into tristate (Bartlomiej Zolnierkiewicz, Peter Chen, Paul Gortmaker). - Add DT support to the generic PM clocks management code and make it export some more symbols (Jon Hunter, Paul Gortmaker). - Make the PCI PM core code slightly more robust against possible driver errors (Andy Shevchenko). - Make it possible to change DESTDIR and PREFIX in turbostat (Andy Shevchenko)" * tag 'pm-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (89 commits) Revert "cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency" PM / hibernate: Introduce test_resume mode for hibernation cpufreq: export cpufreq_driver_resolve_freq() cpufreq: Disallow ->resolve_freq() for drivers providing ->target_index() PCI / PM: check all fields in pci_set_platform_pm() cpufreq: acpi-cpufreq: use cached frequency mapping when possible cpufreq: schedutil: map raw required frequency to driver frequency cpufreq: add cpufreq_driver_resolve_freq() cpufreq: intel_pstate: Check cpuid for MSR_HWP_INTERRUPT intel_pstate: Update cpu_frequency tracepoint every time cpufreq: intel_pstate: clean remnant struct element PM / tools: scripts: AnalyzeSuspend v4.2 x86 / hibernate: Use hlt_play_dead() when resuming from hibernation cpufreq: powernv: Replacing pstate_id with frequency table index intel_pstate: Fix MSR_CONFIG_TDP_x addressing in core_get_max_pstate() PM / hibernate: Image data protection during restoration PM / hibernate: Add missing braces in __register_nosave_region() PM / hibernate: Clean up comments in snapshot.c PM / hibernate: Clean up function headers in snapshot.c PM / hibernate: Add missing braces in hibernate_setup() ...
2016-07-26Merge branch 'for-4.8/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: - the big change is the cleanup from Mike Christie, cleaning up our uses of command types and modified flags. This is what will throw some merge conflicts - regression fix for the above for btrfs, from Vincent - following up to the above, better packing of struct request from Christoph - a 2038 fix for blktrace from Arnd - a few trivial/spelling fixes from Bart Van Assche - a front merge check fix from Damien, which could cause issues on SMR drives - Atari partition fix from Gabriel - convert cfq to highres timers, since jiffies isn't granular enough for some devices these days. From Jan and Jeff - CFQ priority boost fix idle classes, from me - cleanup series from Ming, improving our bio/bvec iteration - a direct issue fix for blk-mq from Omar - fix for plug merging not involving the IO scheduler, like we do for other types of merges. From Tahsin - expose DAX type internally and through sysfs. From Toshi and Yigal * 'for-4.8/core' of git://git.kernel.dk/linux-block: (76 commits) block: Fix front merge check block: do not merge requests without consulting with io scheduler block: Fix spelling in a source code comment block: expose QUEUE_FLAG_DAX in sysfs block: add QUEUE_FLAG_DAX for devices to advertise their DAX support Btrfs: fix comparison in __btrfs_map_block() block: atari: Return early for unsupported sector size Doc: block: Fix a typo in queue-sysfs.txt cfq-iosched: Charge at least 1 jiffie instead of 1 ns cfq-iosched: Fix regression in bonnie++ rewrite performance cfq-iosched: Convert slice_resid from u64 to s64 block: Convert fifo_time from ulong to u64 blktrace: avoid using timespec block/blk-cgroup.c: Declare local symbols static block/bio-integrity.c: Add #include "blk.h" block/partition-generic.c: Remove a set-but-not-used variable block: bio: kill BIO_MAX_SIZE cfq-iosched: temporarily boost queue priority for idle classes block: drbd: avoid to use BIO_MAX_SIZE block: bio: remove BIO_MAX_SECTORS ...
2016-07-22PM / hibernate: Introduce test_resume mode for hibernationChen Yu
test_resume mode is to verify if the snapshot data written to swap device can be successfully restored to memory. It is useful to ease the debugging process on hibernation, since this mode can not only bypass the BIOSes/bootloader, but also the system re-initialization. To avoid the risk to break the filesystm on persistent storage, this patch resumes the image with tasks frozen. For example: echo test_resume > /sys/power/disk echo disk > /sys/power/state [ 187.306470] PM: Image saving progress: 70% [ 187.395298] PM: Image saving progress: 80% [ 187.476697] PM: Image saving progress: 90% [ 187.554641] PM: Image saving done. [ 187.558896] PM: Wrote 594600 kbytes in 0.90 seconds (660.66 MB/s) [ 187.566000] PM: S| [ 187.589742] PM: Basic memory bitmaps freed [ 187.594694] PM: Checking hibernation image [ 187.599865] PM: Image signature found, resuming [ 187.605209] PM: Loading hibernation image. [ 187.665753] PM: Basic memory bitmaps created [ 187.691397] PM: Using 3 thread(s) for decompression. [ 187.691397] PM: Loading and decompressing image data (148650 pages)... [ 187.889719] PM: Image loading progress: 0% [ 188.100452] PM: Image loading progress: 10% [ 188.244781] PM: Image loading progress: 20% [ 189.057305] PM: Image loading done. [ 189.068793] PM: Image successfully loaded Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-15x86 / hibernate: Use hlt_play_dead() when resuming from hibernationRafael J. Wysocki
On Intel hardware, native_play_dead() uses mwait_play_dead() by default and only falls back to the other methods if that fails. That also happens during resume from hibernation, when the restore (boot) kernel runs disable_nonboot_cpus() to take all of the CPUs except for the boot one offline. However, that is problematic, because the address passed to __monitor() in mwait_play_dead() is likely to be written to in the last phase of hibernate image restoration and that causes the "dead" CPU to start executing instructions again. Unfortunately, the page containing the address in that CPU's instruction pointer may not be valid any more at that point. First, that page may have been overwritten with image kernel memory contents already, so the instructions the CPU attempts to execute may simply be invalid. Second, the page tables previously used by that CPU may have been overwritten by image kernel memory contents, so the address in its instruction pointer is impossible to resolve then. A report from Varun Koyyalagunta and investigation carried out by Chen Yu show that the latter sometimes happens in practice. To prevent it from happening, temporarily change the smp_ops.play_dead pointer during resume from hibernation so that it points to a special "play dead" routine which uses hlt_play_dead() and avoids the inadvertent "revivals" of "dead" CPUs this way. A slightly unpleasant consequence of this change is that if the system is hibernated with one or more CPUs offline, it will generally draw more power after resume than it did before hibernation, because the physical state entered by CPUs via hlt_play_dead() is higher-power than the mwait_play_dead() one in the majority of cases. It is possible to work around this, but it is unclear how much of a problem that's going to be in practice, so the workaround will be implemented later if it turns out to be necessary. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106371 Reported-by: Varun Koyyalagunta <cpudebug@centtech.com> Original-by: Chen Yu <yu.c.chen@intel.com> Tested-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2016-07-10PM / hibernate: Image data protection during restorationRafael J. Wysocki
Make it possible to protect all pages holding image data during hibernate image restoration by setting them read-only (so as to catch attempts to write to those pages after image data have been stored in them). This adds overhead to image restoration code (it may cause large page mappings to be split as a result of page flags changes) and the errors it protects against should never happen in theory, so the feature is only active after passing hibernate=protect_image to the command line of the restore kernel. Also it only is built if CONFIG_DEBUG_RODATA is set. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10PM / hibernate: Add missing braces in __register_nosave_region()Rafael J. Wysocki
One branch of an if/else statement in __register_nosave_region() is formatted against the kernel coding style which causes the code to look slightly odd. To fix that, add missing braces to it. No functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10PM / hibernate: Clean up comments in snapshot.cRafael J. Wysocki
Many comments in kernel/power/snapshot.c do not follow the general comment formatting rules. They look odd, some of them are outdated too, some are hard to parse and generally difficult to understand. Clean them up to make them easier to comprehend. No functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10PM / hibernate: Clean up function headers in snapshot.cRafael J. Wysocki
The formatting of some function headers in kernel/power/snapshot.c is not consistent with the general kernel coding style and with the formatting of some other function headers in the same file. Make all of them follow the same formatting convention. No functional changes. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-10PM / hibernate: Add missing braces in hibernate_setup()Rafael J. Wysocki
Make hibernate_setup() follow the coding style more closely by adding some missing braces to the if () statement in it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08Merge back earlier suspend/hibernation changes for v4.8.Rafael J. Wysocki
2016-07-08Merge branch 'x86/mm' into x86/boot, to pick up dependenciesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-02PM / hibernate: Recycle safe pages after image restorationRafael J. Wysocki
One of the memory bitmaps used by the hibernation image restoration code is freed after the image has been loaded. That is not quite efficient, though, because the memory pages used for building that bitmap are known to be safe (ie. they were not used by the image kernel before hibernation) and the arch-specific code finalizing the image restoration may need them. In that case it needs to allocate those pages again via the memory management subsystem, check if they are really safe again by consulting the other bitmaps and so on. To avoid that, recycle those pages by putting them into the global list of known safe pages so that they can be given to the arch code right away when necessary. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02PM / hibernate: Simplify mark_unsafe_pages()Rafael J. Wysocki
Rework mark_unsafe_pages() to use a simpler method of clearing all bits in free_pages_map and to set the bits for the "unsafe" pages (ie. pages that were used by the image kernel before hibernation) with the help of duplicate_memory_bitmap(). For this purpose, move the pfn_valid() check from mark_unsafe_pages() to unpack_orig_pfns() where the "unsafe" pages are discovered. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02PM / hibernate: Do not free preallocated safe pages during image restoreRafael J. Wysocki
The core image restoration code preallocates some safe pages (ie. pages that weren't used by the image kernel before hibernation) for future use before allocating the bulk of memory for loading the image data. Those safe pages are then freed so they can be allocated again (with the memory management subsystem's help). That's done to ensure that there will be enough safe pages for temporary data structures needed during image restoration. However, it is not really necessary to free those pages after they have been allocated. They can be added to the (global) list of safe pages right away and then picked up from there when needed without freeing. That reduces the overhead related to using safe pages, especially in the arch-specific code, so modify the code accordingly. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-02PM / suspend: show workqueue state in suspend flowRoger Lu
If freezable workqueue aborts suspend flow, show workqueue state for debug purpose. Signed-off-by: Roger Lu <roger.lu@mediatek.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-28PM / sleep: make PM notifiers called symmetricallyLianwei Wang
This makes pm notifier PREPARE/POST symmetrical: if PREPARE fails, we will only undo what ever happened on PREPARE. It fixes the unbalanced CPU hotplug enable in CPU PM notifier. Signed-off-by: Lianwei Wang <lianwei.wang@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-26x86/KASLR, x86/power: Remove x86 hibernation restrictionsKees Cook
With the following fix: 70595b479ce1 ("x86/power/64: Fix crash whan the hibernation code passes control to the image kernel") ... there is no longer a problem with hibernation resuming a KASLR-booted kernel image, so remove the restriction. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linux PM list <linux-pm@vger.kernel.org> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Smalley <sds@tycho.nsa.gov> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: linux-doc@vger.kernel.org Link: http://lkml.kernel.org/r/20160613221002.GA29719@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-24oom, suspend: fix oom_reaper vs. oom_killer_disable raceMichal Hocko
Tetsuo has reported the following potential oom_killer_disable vs. oom_reaper race: (1) freeze_processes() starts freezing user space threads. (2) Somebody (maybe a kenrel thread) calls out_of_memory(). (3) The OOM killer calls mark_oom_victim() on a user space thread P1 which is already in __refrigerator(). (4) oom_killer_disable() sets oom_killer_disabled = true. (5) P1 leaves __refrigerator() and enters do_exit(). (6) The OOM reaper calls exit_oom_victim(P1) before P1 can call exit_oom_victim(P1). (7) oom_killer_disable() returns while P1 not yet finished (8) P1 perform IO/interfere with the freezer. This situation is unfortunate. We cannot move oom_killer_disable after all the freezable kernel threads are frozen because the oom victim might depend on some of those kthreads to make a forward progress to exit so we could deadlock. It is also far from trivial to teach the oom_reaper to not call exit_oom_victim() because then we would lose a guarantee of the OOM killer and oom_killer_disable forward progress because exit_mm->mmput might block and never call exit_oom_victim. It seems the easiest way forward is to workaround this race by calling try_to_freeze_tasks again after oom_killer_disable. This will make sure that all the tasks are frozen or it bails out. Fixes: 449d777d7ad6 ("mm, oom_reaper: clear TIF_MEMDIE for all tasks queued for oom_reaper") Link: http://lkml.kernel.org/r/1466597634-16199-1-git-send-email-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-15PM / sleep: Make pm_prepare_console() return voidBorislav Petkov
Nothing is using its return value so change it to return void. No functionality change. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-14PM / Hibernate: Don't let kasan instrument snapshot.cJames Morse
Kasan causes the compiler to instrument C code and is used at runtime to detect accesses to memory that has been freed, or not yet allocated. The code in snapshot.c saves and restores memory when hibernating. This will access whole pages in the slab cache that have both free and allocated areas, resulting in a large number of false positives from Kasan. Disable instrumentation of this file. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-07pm: use bio op accessorsMike Christie
Separate the op from the rq_flag_bits and have the pm code set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-06-07block/fs/drivers: remove rw argument from submit_bioMike Christie
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw instead of passing it in. This makes that use the same as generic_make_request and how we set the other bio fields. Signed-off-by: Mike Christie <mchristi@redhat.com> Fixed up fs/ext4/crypto.c Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-28PM / Hibernate: Call flush_icache_range() on pages restored in-placeJames Morse
Some architectures require code written to memory as if it were data to be 'cleaned' from any data caches before the processor can fetch them as new instructions. During resume from hibernate, the snapshot code copies some pages directly, meaning these architectures do not get a chance to perform their cache maintenance. Modify the read and decompress code to call flush_icache_range() on all pages that are restored, so that the restored in-place pages are guaranteed to be executable on these architectures. Signed-off-by: James Morse <james.morse@arm.com> Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [will: make clean_pages_on_* static and remove initialisers] Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-24Merge tag 'pm+acpi-4.6-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management and ACPI updates from Rafael Wysocki: "The second batch of power management and ACPI updates for v4.6. Included are fixups on top of the previous PM/ACPI pull request and other material that didn't make into it but still should go into 4.6. Among other things, there's a fix for an intel_pstate driver issue uncovered by recent cpufreq changes, a workaround for a boot hang on Skylake-H related to the handling of deep C-states by the platform and a PCI/ACPI fix for the handling of IO port resources on non-x86 architectures plus some new device IDs and similar. Specifics: - Fix for an intel_pstate driver issue related to the handling of MSR updates uncovered by the recent cpufreq rework (Rafael Wysocki). - cpufreq core cleanups related to starting governors and frequency synchronization during resume from system suspend and a locking fix for cpufreq_quick_get() (Rafael Wysocki, Richard Cochran). - acpi-cpufreq and powernv cpufreq driver updates (Jisheng Zhang, Michael Neuling, Richard Cochran, Shilpasri Bhat). - intel_idle driver update preventing some Skylake-H systems from hanging during initialization by disabling deep C-states mishandled by the platform in the problematic configurations (Len Brown). - Intel Xeon Phi Processor x200 support for intel_idle (Dasaratharaman Chandramouli). - cpuidle menu governor updates to make it always honor PM QoS latency constraints (and prevent C1 from being used as the fallback C-state on x86 when they are set below its exit latency) and to restore the previous behavior to fall back to C1 if the next timer event is set far enough in the future that was changed in 4.4 which led to an energy consumption regression (Rik van Riel, Rafael Wysocki). - New device ID for a future AMD UART controller in the ACPI driver for AMD SoCs (Wang Hongcheng). - Rockchip rk3399 support for the rockchip-io-domain adaptive voltage scaling (AVS) driver (David Wu). - ACPI PCI resources management fix for the handling of IO space resources on architectures where the IO space is memory mapped (IA64 and ARM64) broken by the introduction of common ACPI resources parsing for PCI host bridges in 4.4 (Lorenzo Pieralisi). - Fix for the ACPI backend of the generic device properties API to make it parse non-device (data node only) children of an ACPI device correctly (Irina Tirdea). - Fixes for the handling of global suspend flags (introduced in 4.4) during hibernation and resume from it (Lukas Wunner). - Support for obtaining configuration information from Device Trees in the PM clocks framework (Jon Hunter). - ACPI _DSM helper code and devfreq framework cleanups (Colin Ian King, Geert Uytterhoeven)" * tag 'pm+acpi-4.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM / AVS: rockchip-io: add io selectors and supplies for rk3399 intel_idle: Support for Intel Xeon Phi Processor x200 Product Family intel_idle: prevent SKL-H boot failure when C8+C9+C10 enabled ACPI / PM: Runtime resume devices when waking from hibernate PM / sleep: Clear pm_suspend_global_flags upon hibernate cpufreq: governor: Always schedule work on the CPU running update cpufreq: Always update current frequency before startig governor cpufreq: Introduce cpufreq_update_current_freq() cpufreq: Introduce cpufreq_start_governor() cpufreq: powernv: Add sysfs attributes to show throttle stats cpufreq: acpi-cpufreq: make Intel/AMD MSR access, io port access static PCI: ACPI: IA64: fix IO port generic range check ACPI / util: cast data to u64 before shifting to fix sign extension cpufreq: powernv: Define per_cpu chip pointer to optimize hot-path cpuidle: menu: Fall back to polling if next timer event is near cpufreq: acpi-cpufreq: Clean up hot plug notifier callback intel_pstate: Do not call wrmsrl_on_cpu() with disabled interrupts cpufreq: Make cpufreq_quick_get() safe to call ACPI / property: fix data node parsing in acpi_get_next_subnode() ACPI / APD: Add device HID for future AMD UART controller ...
2016-03-25Merge branches 'pm-avs', 'pm-clk', 'pm-devfreq' and 'pm-sleep'Rafael J. Wysocki
* pm-avs: PM / AVS: rockchip-io: add io selectors and supplies for rk3399 * pm-clk: PM / clk: Add support for obtaining clocks from device-tree * pm-devfreq: PM / devfreq: Spelling s/frequnecy/frequency/ * pm-sleep: ACPI / PM: Runtime resume devices when waking from hibernate PM / sleep: Clear pm_suspend_global_flags upon hibernate
2016-03-23PM / sleep: Clear pm_suspend_global_flags upon hibernateLukas Wunner
When suspending to RAM, waking up and later suspending to disk, we gratuitously runtime resume devices after the thaw phase. This does not occur if we always suspend to RAM or always to disk. pm_complete_with_resume_check(), which gets called from pci_pm_complete() among others, schedules a runtime resume if PM_SUSPEND_FLAG_FW_RESUME is set. The flag is set during a suspend-to-RAM cycle. It is cleared at the beginning of the suspend-to-RAM cycle but not afterwards and it is not cleared during a suspend-to-disk cycle at all. Fix it. Fixes: ef25ba047601 (PM / sleep: Add flags to indicate platform firmware involvement) Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-22kernel/...: convert pr_warning to pr_warnJoe Perches
Use the more common logging method with the eventual goal of removing pr_warning altogether. Miscellanea: - Realign arguments - Coalesce formats - Add missing space between a few coalesced formats Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-16Merge tag 'pm+acpi-4.6-rc1-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "This time the majority of changes go into cpufreq and they are significant. First off, the way CPU frequency updates are triggered is different now. Instead of having to set up and manage a deferrable timer for each CPU in the system to evaluate and possibly change its frequency periodically, cpufreq governors set up callbacks to be invoked by the scheduler on a regular basis (basically on utilization updates). The "old" governors, "ondemand" and "conservative", still do all of their work in process context (although that is triggered by the scheduler now), but intel_pstate does it all in the callback invoked by the scheduler with no need for any additional asynchronous processing. Of course, this eliminates the overhead related to the management of all those timers, but also it allows the cpufreq governor code to be simplified quite a bit. On top of that, the common code and data structures used by the "ondemand" and "conservative" governors are cleaned up and made more straightforward and some long-standing and quite annoying problems are addressed. In particular, the handling of governor sysfs attributes is modified and the related locking becomes more fine grained which allows some concurrency problems to be avoided (particularly deadlocks with the core cpufreq code). In principle, the new mechanism for triggering frequency updates allows utilization information to be passed from the scheduler to cpufreq. Although the current code doesn't make use of it, in the works is a new cpufreq governor that will make decisions based on the scheduler's utilization data. That should allow the scheduler and cpufreq to work more closely together in the long run. In addition to the core and governor changes, cpufreq drivers are updated too. Fixes and optimizations go into intel_pstate, the cpufreq-dt driver is updated on top of some modification in the Operating Performance Points (OPP) framework and there are fixes and other updates in the powernv cpufreq driver. Apart from the cpufreq updates there is some new ACPICA material, including a fix for a problem introduced by previous ACPICA updates, and some less significant changes in the ACPI code, like CPPC code optimizations, ACPI processor driver cleanups and support for loading ACPI tables from initrd. Also updated are the generic power domains framework, the Intel RAPL power capping driver and the turbostat utility and we have a bunch of traditional assorted fixes and cleanups. Specifics: - Redesign of cpufreq governors and the intel_pstate driver to make them use callbacks invoked by the scheduler to trigger CPU frequency evaluation instead of using per-CPU deferrable timers for that purpose (Rafael Wysocki). - Reorganization and cleanup of cpufreq governor code to make it more straightforward and fix some concurrency problems in it (Rafael Wysocki, Viresh Kumar). - Cleanup and improvements of locking in the cpufreq core (Viresh Kumar). - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh Kumar, Eric Biggers). - intel_pstate driver updates including fixes, optimizations and a modification to make it enable enable hardware-coordinated P-state selection (HWP) by default if supported by the processor (Philippe Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe Franciosi). - Operating Performance Points (OPP) framework updates to improve its handling of voltage regulators and device clocks and updates of the cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter). - Updates of the powernv cpufreq driver to fix initialization and cleanup problems in it and correct its worker thread handling with respect to CPU offline, new powernv_throttle tracepoint (Shilpasri Bhat). - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki). - ACPICA updates including one fix for a regression introduced by previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box, Colin Ian King). - Support for installing ACPI tables from initrd (Lv Zheng). - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin Chaugule). - Support for _HID(ACPI0010) devices (ACPI processor containers) and ACPI processor driver cleanups (Sudeep Holla). - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory, Aleksey Makarov). - Modification of the ACPI PCI IRQ management code to make it treat 255 in the Interrupt Line register as "not connected" on x86 (as per the specification) and avoid attempts to use that value as a valid interrupt vector (Chen Fan). - ACPI APEI fixes related to resource leaks (Josh Hunt). - Removal of modularity from a few ACPI drivers (BGRT, GHES, intel_pmic_crc) that cannot be built as modules in practice (Paul Gortmaker). - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS as a valid resource type (Harb Abdulhamid). - New device ID (future AMD I2C controller) in the ACPI driver for AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu). - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin). - cpuidle menu governor optimization to avoid a square root computation in it (Rasmus Villemoes). - Fix for potential use-after-free in the generic device properties framework (Heikki Krogerus). - Updates of the generic power domains (genpd) framework including support for multiple power states of a domain, fixes and debugfs output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart, Geert Uytterhoeven). - Intel RAPL power capping driver updates to reduce IPI overhead in it (Jacob Pan). - System suspend/hibernation code cleanups (Eric Biggers, Saurabh Sengar). - Year 2038 fix for the process freezer (Abhilash Jindal). - turbostat utility updates including new features (decoding of more registers and CPUID fields, sub-second intervals support, GFX MHz and RC6 printout, --out command line option), fixes (syscall jitter detection and workaround, reductioin of the number of syscalls made, fixes related to Xeon x200 processors, compiler warning fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)" * tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits) tools/power turbostat: bugfix: TDP MSRs print bits fixing tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump tools/power turbostat: call __cpuid() instead of __get_cpuid() tools/power turbostat: indicate SMX and SGX support tools/power turbostat: detect and work around syscall jitter tools/power turbostat: show GFX%rc6 tools/power turbostat: show GFXMHz tools/power turbostat: show IRQs per CPU tools/power turbostat: make fewer systems calls tools/power turbostat: fix compiler warnings tools/power turbostat: add --out option for saving output in a file tools/power turbostat: re-name "%Busy" field to "Busy%" tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding tools/power turbostat: Intel Xeon x200: fix erroneous bclk value tools/power turbostat: allow sub-sec intervals ACPI / APEI: ERST: Fixed leaked resources in erst_init ACPI / APEI: Fix leaked resources intel_pstate: Do not skip samples partially intel_pstate: Remove freq calculation from intel_pstate_calc_busy() intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance() ...
2016-03-15mm/page_poisoning.c: allow for zero poisoningLaura Abbott
By default, page poisoning uses a poison value (0xaa) on free. If this is changed to 0, the page is not only sanitized but zeroing on alloc with __GFP_ZERO can be skipped as well. The tradeoff is that detecting corruption from the poisoning is harder to detect. This feature also cannot be used with hibernation since pages are not guaranteed to be zeroed after hibernation. Credit to Grsecurity/PaX team for inspiring this work Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Jianyu Zhan <nasa4836@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-11PM / suspend: replacing printksaurabh
replacing printk(s) with appropriate pr_info and pr_err in order to fix checkpatch.pl warnings Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-11PM/freezer: y2038, use boottime to compare tstampsAbhilash Jindal
Wall time obtained from do_gettimeofday gives 32 bit timeval which can only represent time until January 2038. This patch moves to ktime_t, a 64-bit time. Also, wall time is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for subtracting two timestamps. Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-27PM: APM_EMULATION does not depend on PMArnd Bergmann
The APM emulation code does multiple things, and some of them depend on PM_SLEEP, while the battery management does not. However, selecting the symbol like SHARPSL_PM does causes a Kconfig warning: warning: (SHARPSL_PM && PMAC_APM_EMU) selects APM_EMULATION which has unmet direct dependencies (PM && SYS_SUPPORTS_APM_EMULATION) From all I can tell, this is completely harmless, and we can simply allow APM_EMULATION to be enabled here, even if PM is not. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-04PM / sleep: Add support for read-only sysfs attributesRafael J. Wysocki
Some sysfs attributes in /sys/power/ should really be read-only, so add support for that, convert those attributes to read-only and drop the stub .show() routines from them. Original-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-11-06mm, page_alloc: rename __GFP_WAIT to __GFP_RECLAIMMel Gorman
__GFP_WAIT was used to signal that the caller was in atomic context and could not sleep. Now it is possible to distinguish between true atomic context and callers that are not willing to sleep. The latter should clear __GFP_DIRECT_RECLAIM so kswapd will still wake. As clearing __GFP_WAIT behaves differently, there is a risk that people will clear the wrong flags. This patch renames __GFP_WAIT to __GFP_RECLAIM to clearly indicate what it does -- setting it allows all reclaim activity, clearing them prevents it. [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-06mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman
sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-14PM / hibernate: fix a comment typoGeliang Tang
Just fix a typo in a function name in kerneldoc comments. Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-14PM / sleep: Add flags to indicate platform firmware involvementRafael J. Wysocki
There are quite a few cases in which device drivers, bus types or even the PM core itself may benefit from knowing whether or not the platform firmware will be involved in the upcoming system power transition (during system suspend) or whether or not it was involved in it (during system resume). For this reason, introduce global system suspend flags that can be used by the platform code to expose that information for the benefit of the other parts of the kernel and make the ACPI core set them as appropriate. Users of the new flags will be added later. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-16PM / sleep: Report interrupt that caused system wakeupAlexandra Yates
Add a sysfs attribute, /sys/power/pm_wakeup_irq, reporting the IRQ number of the first wakeup interrupt (that is, the first interrupt from an IRQ line armed for system wakeup) seen by the kernel during the most recent system suspend/resume cycle. This feature will be useful for system wakeup diagnostics of spurious wakeup interrupts. Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com> [ rjw: Fixed up pm_wakeup_irq definition ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>