summaryrefslogtreecommitdiff
path: root/mm/zsmalloc.c
AgeCommit message (Collapse)Author
2015-09-08mm: zpool: constify the zpool_opsKrzysztof Kozlowski
The structure zpool_ops is not modified so make the pointer to it a pointer to const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: remove null check from destroy_handle_cache()Sergey Senozhatsky
We can pass a NULL cache pointer to kmem_cache_destroy(), because it NULL-checks its argument now. Remove redundant test from destroy_handle_cache(). Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: do not take class lock in zs_shrinker_count()Sergey Senozhatsky
We can avoid taking class ->lock around zs_can_compact() in zs_shrinker_count(), because the number that we return back is outdated in general case, by design. We have different sources that are able to change class's state right after we return from zs_can_compact() -- ongoing I/O operations, manually triggered compaction, or two of them happening simultaneously. We re-do this calculations during compaction on a per class basis anyway. zs_unregister_shrinker() will not return until we have an active shrinker, so classes won't unexpectedly disappear while zs_shrinker_count() iterates them. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: use class->pages_per_zspageMinchan Kim
There is no need to recalcurate pages_per_zspage in runtime. Just use class->pages_per_zspage to avoid unnecessary runtime overhead. Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: consider ZS_ALMOST_FULL as migrate sourceMinchan Kim
There is no reason to prevent select ZS_ALMOST_FULL as migration source if we cannot find source from ZS_ALMOST_EMPTY. With this patch, zs_can_compact will return more exact result. Signed-off-by: Minchan Kim <minchan.kim@lge.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: partial page ordering within a fullness_listSergey Senozhatsky
We want to see more ZS_FULL pages and less ZS_ALMOST_{FULL, EMPTY} pages. Put a page with higher ->inuse count first within its ->fullness_list, which will give us better chances to fill up this page with new objects (find_get_zspage() return ->fullness_list head for new object allocation), so some zspages will become ZS_ALMOST_FULL/ZS_FULL quicker. It performs a trivial and cheap ->inuse compare which does not slow down zsmalloc and in the worst case keeps the list pages in no particular order. A more expensive solution could sort fullness_list by ->inuse count. [minchan@kernel.org: code adjustments] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: use shrinker to trigger auto-compactionSergey Senozhatsky
Perform automatic pool compaction by a shrinker when system is getting tight on memory. User-space has a very little knowledge regarding zsmalloc fragmentation and basically has no mechanism to tell whether compaction will result in any memory gain. Another issue is that user space is not always aware of the fact that system is getting tight on memory. Which leads to very uncomfortable scenarios when user space may start issuing compaction 'randomly' or from crontab (for example). Fragmentation is not always necessarily bad, allocated and unused objects, after all, may be filled with the data later, w/o the need of allocating a new zspage. On the other hand, we obviously don't want to waste memory when the system needs it. Compaction now has a relatively quick pool scan so we are able to estimate the number of pages that will be freed easily, which makes it possible to call this function from a shrinker->count_objects() callback. We also abort compaction as soon as we detect that we can't free any pages any more, preventing wasteful objects migrations. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: account the number of compacted pagesSergey Senozhatsky
Compaction returns back to zram the number of migrated objects, which is quite uninformative -- we have objects of different sizes so user space cannot obtain any valuable data from that number. Change compaction to operate in terms of pages and return back to compaction issuer the number of pages that were freed during compaction. So from now on we will export more meaningful value in zram<id>/mm_stat -- the number of freed (compacted) pages. This requires: (a) a rename of `num_migrated' to 'pages_compacted' (b) a internal API change -- return first_page's fullness_group from putback_zspage(), so we know when putback_zspage() did free_zspage(). It helps us to account compaction stats correctly. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc/zram: introduce zs_pool_stats apiSergey Senozhatsky
`zs_compact_control' accounts the number of migrated objects but it has a limited lifespan -- we lose it as soon as zs_compaction() returns back to zram. It worked fine, because (a) zram had it's own counter of migrated objects and (b) only zram could trigger compaction. However, this does not work for automatic pool compaction (not issued by zram). To account objects migrated during auto-compaction (issued by the shrinker) we need to store this number in zs_pool. Define a new `struct zs_pool_stats' structure to keep zs_pool's stats there. It provides only `num_migrated', as of this writing, but it surely can be extended. A new zsmalloc zs_pool_stats() symbol exports zs_pool's stats back to caller. Use zs_pool_stats() in zram and remove `num_migrated' from zram_stats. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: cosmetic compaction code adjustmentsSergey Senozhatsky
Change zs_object_copy() argument order to be (DST, SRC) rather than (SRC, DST). copy/move functions usually have (to, from) arguments order. Rename alloc_target_page() to isolate_target_page(). This function doesn't allocate anything, it isolates target page, pretty much like isolate_source_page(). Tweak __zs_compact() comment. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: introduce zs_can_compact() functionSergey Senozhatsky
This function checks if class compaction will free any pages. Rephrasing -- do we have enough unused objects to form at least one ZS_EMPTY page and free it. It aborts compaction if class compaction will not result in any (further) savings. EXAMPLE (this debug output is not part of this patch set): - class size - number of allocated objects - number of used objects - max objects per zspage - pages per zspage - estimated number of pages that will be freed [..] class-512 objs:544 inuse:540 maxobj-per-zspage:8 pages-per-zspage:1 zspages-to-free:0 ... class-512 compaction is useless. break class-496 objs:660 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:2 class-496 objs:627 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:1 class-496 objs:594 inuse:570 maxobj-per-zspage:33 pages-per-zspage:4 zspages-to-free:0 ... class-496 compaction is useless. break class-448 objs:657 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:4 class-448 objs:648 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:3 class-448 objs:639 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:2 class-448 objs:630 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:1 class-448 objs:621 inuse:617 maxobj-per-zspage:9 pages-per-zspage:1 zspages-to-free:0 ... class-448 compaction is useless. break class-432 objs:728 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:1 class-432 objs:700 inuse:685 maxobj-per-zspage:28 pages-per-zspage:3 zspages-to-free:0 ... class-432 compaction is useless. break class-416 objs:819 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:2 class-416 objs:780 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:1 class-416 objs:741 inuse:705 maxobj-per-zspage:39 pages-per-zspage:4 zspages-to-free:0 ... class-416 compaction is useless. break class-400 objs:690 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:1 class-400 objs:680 inuse:674 maxobj-per-zspage:10 pages-per-zspage:1 zspages-to-free:0 ... class-400 compaction is useless. break class-384 objs:736 inuse:709 maxobj-per-zspage:32 pages-per-zspage:3 zspages-to-free:0 ... class-384 compaction is useless. break [..] Every "compaction is useless" indicates that we saved CPU cycles. class-512 has 544 object allocated 540 objects used 8 objects per-page Even if we have a ALMOST_EMPTY zspage, we still don't have enough room to migrate all of its objects and free this zspage; so compaction will not make a lot of sense, it's better to just leave it as is. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: always keep per-class statsSergey Senozhatsky
Always account per-class `zs_size_stat' stats. This data will help us make better decisions during compaction. We are especially interested in OBJ_ALLOCATED and OBJ_USED, which can tell us if class compaction will result in any memory gain. For instance, we know the number of allocated objects in the class, the number of objects being used (so we also know how many objects are not used) and the number of objects per-page. So we can ensure if we have enough unused objects to form at least one ZS_EMPTY zspage during compaction. We calculate this value on per-class basis so we can calculate a total number of zspages that can be released. Which is exactly what a shrinker wants to know. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-08zsmalloc: drop unused variable `nr_to_migrate'Sergey Senozhatsky
This patchset tweaks compaction and makes it possible to trigger pool compaction automatically when system is getting low on memory. zsmalloc in some cases can suffer from a notable fragmentation and compaction can release some considerable amount of memory. The problem here is that currently we fully rely on user space to perform compaction when needed. However, performing zsmalloc compaction is not always an obvious thing to do. For example, suppose we have a `idle' fragmented (compaction was never performed) zram device and system is getting low on memory due to some 3rd party user processes (gcc LTO, or firefox, etc.). It's quite unlikely that user space will issue zpool compaction in this case. Besides, user space cannot tell for sure how badly pool is fragmented; however, this info is known to zsmalloc and, hence, to a shrinker. This patch (of 7): __zs_compact() does not use `nr_to_migrate', drop it. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25zpool: remove zpool_evict()Dan Streetman
Remove zpool_evict() helper function. As zbud is currently the only zpool implementation that supports eviction, add zpool and zpool_ops references to struct zbud_pool and directly call zpool_ops->evict(zpool, handle) on eviction. Currently zpool provides the zpool_evict helper which locks the zpool list lock and searches through all pools to find the specific one matching the caller, and call the corresponding zpool_ops->evict function. However, this is unnecessary, as the zbud pool can simply keep a reference to the zpool that created it, as well as the zpool_ops, and directly call the zpool_ops->evict function, when it needs to evict a page. This avoids a spinlock and list search in zpool for each eviction. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25zsmalloc: remove obsolete ZSMALLOC_DEBUGMarcin Jabrzyk
The DEBUG define in zsmalloc is useless, there is no usage of it at all. Signed-off-by: Marcin Jabrzyk <m.jabrzyk@samsung.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10zsmalloc: fix a null pointer dereference in destroy_handle_cache()Sergey Senozhatsky
If zs_create_pool()->create_handle_cache()->kmem_cache_create() or pool->name allocation fails, zs_create_pool()->destroy_handle_cache() will dereference the NULL pool->handle_cachep. Modify destroy_handle_cache() to avoid this. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: remove extra cond_resched() in __zs_compactSergey Senozhatsky
Do not perform cond_resched() before the busy compaction loop in __zs_compact(), because this loop does it when needed. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: fix fatal corruption due to wrong size class selectionHeesub Shin
There is no point in overriding the size class below. It causes fatal corruption on the next chunk on the 3264-bytes size class, which is the last size class that is not huge. For example, if the requested size was exactly 3264 bytes, current zsmalloc allocates and returns a chunk from the size class of 3264 bytes, not 4096. User access to this chunk may overwrite head of the next adjacent chunk. Here is the panic log captured when freelist was corrupted due to this: Kernel BUG at ffffffc00030659c [verbose debug info unavailable] Internal error: Oops - BUG: 96000006 [#1] PREEMPT SMP Modules linked in: exynos-snapshot: core register saved(CPU:5) CPUMERRSR: 0000000000000000, L2MERRSR: 0000000000000000 exynos-snapshot: context saved(CPU:5) exynos-snapshot: item - log_kevents is disabled CPU: 5 PID: 898 Comm: kswapd0 Not tainted 3.10.61-4497415-eng #1 task: ffffffc0b8783d80 ti: ffffffc0b71e8000 task.ti: ffffffc0b71e8000 PC is at obj_idx_to_offset+0x0/0x1c LR is at obj_malloc+0x44/0xe8 pc : [<ffffffc00030659c>] lr : [<ffffffc000306604>] pstate: a0000045 sp : ffffffc0b71eb790 x29: ffffffc0b71eb790 x28: ffffffc00204c000 x27: 000000000001d96f x26: 0000000000000000 x25: ffffffc098cc3500 x24: ffffffc0a13f2810 x23: ffffffc098cc3501 x22: ffffffc0a13f2800 x21: 000011e1a02006e3 x20: ffffffc0a13f2800 x19: ffffffbc02a7e000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000feb x15: 0000000000000000 x14: 00000000a01003e3 x13: 0000000000000020 x12: fffffffffffffff0 x11: ffffffc08b264000 x10: 00000000e3a01004 x9 : ffffffc08b263fea x8 : ffffffc0b1e611c0 x7 : ffffffc000307d24 x6 : 0000000000000000 x5 : 0000000000000038 x4 : 000000000000011e x3 : ffffffbc00003e90 x2 : 0000000000000cc0 x1 : 00000000d0100371 x0 : ffffffbc00003e90 Reported-by: Sooyong Suk <s.suk@samsung.com> Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Tested-by: Sooyong Suk <s.suk@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: remove unnecessary insertion/removal of zspage in compactionMinchan Kim
In putback_zspage, we don't need to insert a zspage into list of zspage in size_class again to just fix fullness group. We could do directly without reinsertion so we could save some instuctions. Reported-by: Heesub Shin <heesub.shin@samsung.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Juneho Choi <juno.choi@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: micro-optimize zs_object_copy()Sergey Senozhatsky
A micro-optimization. Avoid additional branching and reduce (a bit) registry pressure (f.e. s_off += size; d_off += size; may be calculated twise: first for >= PAGE_SIZE check and later for offset update in "else" clause). scripts/bloat-o-meter shows some improvement add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10) function old new delta zs_object_copy 550 540 -10 Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: remove synchronize_rcu from zs_compact()Sergey Senozhatsky
Do not synchronize rcu in zs_compact(). Neither zsmalloc not zram use rcu. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15mm/zsmalloc.c: fix comment for get_pages_per_zspageYinghao Xie
Signed-off-by: Yinghao Xie <yinghao.xie@sumsung.com> Suggested-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: zsmalloc documentationMinchan Kim
Create zsmalloc doc which explains design concept and stat information. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: add fullness into statMinchan Kim
During investigating compaction, fullness information of each class is helpful for investigating how the compaction works well. With that, we could know how compaction works well more clear on each size class. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: record handle in page->private for huge objectMinchan Kim
We store handle on header of each allocated object so it increases the size of each object by sizeof(unsigned long). If zram stores 4096 bytes to zsmalloc(ie, bad compression), zsmalloc needs 4104B-class to add handle. However, 4104B-class has 1-pages_per_zspage so wasted size by internal fragment is 8192 - 4104, which is terrible. So this patch records the handle in page->private on such huge object(ie, pages_per_zspage == 1 && maxobj_per_zspage == 1) instead of header of each object so we could use 4096B-class, not 4104B-class. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: adjust ZS_ALMOST_FULLMinchan Kim
Curretly, zsmalloc regards a zspage as ZS_ALMOST_EMPTY if the zspage has under 1/4 used objects(ie, fullness_threshold_frac). It could make result in loose packing since zsmalloc migrates only ZS_ALMOST_EMPTY zspage out. This patch changes the rule so that zsmalloc makes zspage which has above 3/4 used object ZS_ALMOST_FULL so it could make tight packing. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: support compactionMinchan Kim
This patch provides core functions for migration of zsmalloc. Migraion policy is simple as follows. for each size class { while { src_page = get zs_page from ZS_ALMOST_EMPTY if (!src_page) break; dst_page = get zs_page from ZS_ALMOST_FULL if (!dst_page) dst_page = get zs_page from ZS_ALMOST_EMPTY if (!dst_page) break; migrate(from src_page, to dst_page); } } For migration, we need to identify which objects in zspage are allocated to migrate them out. We could know it by iterating of freed objects in a zspage because first_page of zspage keeps free objects singly-linked list but it's not efficient. Instead, this patch adds a tag(ie, OBJ_ALLOCATED_TAG) in header of each object(ie, handle) so we could check whether the object is allocated easily. This patch adds another status bit in handle to synchronize between user access through zs_map_object and migration. During migration, we cannot move objects user are using due to data coherency between old object and new object. [akpm@linux-foundation.org: zsmalloc.c needs sched.h for cond_resched()] Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: factor out obj_[malloc|free]Minchan Kim
In later patch, migration needs some part of functions in zs_malloc and zs_free so this patch factor out them. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-15zsmalloc: decouple handle and objectMinchan Kim
Recently, we started to use zram heavily and some of issues popped. 1) external fragmentation I got a report from Juneho Choi that fork failed although there are plenty of free pages in the system. His investigation revealed zram is one of the culprit to make heavy fragmentation so there was no more contiguous 16K page for pgd to fork in the ARM. 2) non-movable pages Other problem of zram now is that inherently, user want to use zram as swap in small memory system so they use zRAM with CMA to use memory efficiently. However, unfortunately, it doesn't work well because zRAM cannot use CMA's movable pages unless it doesn't support compaction. I got several reports about that OOM happened with zram although there are lots of swap space and free space in CMA area. 3) internal fragmentation zRAM has started support memory limitation feature to limit memory usage and I sent a patchset(https://lkml.org/lkml/2014/9/21/148) for VM to be harmonized with zram-swap to stop anonymous page reclaim if zram consumed memory up to the limit although there are free space on the swap. One problem for that direction is zram has no way to know any hole in memory space zsmalloc allocated by internal fragmentation so zram would regard swap is full although there are free space in zsmalloc. For solving the issue, zram want to trigger compaction of zsmalloc before it decides full or not. This patchset is first step to support above issues. For that, it adds indirect layer between handle and object location and supports manual compaction to solve 3th problem first of all. After this patchset got merged, next step is to make VM aware of zsmalloc compaction so that generic compaction will move zsmalloced-pages automatically in runtime. In my imaginary experiment(ie, high compress ratio data with heavy swap in/out on 8G zram-swap), data is as follows, Before = zram allocated object : 60212066 bytes zram total used: 140103680 bytes ratio: 42.98 percent MemFree: 840192 kB Compaction After = frag ratio after compaction zram allocated object : 60212066 bytes zram total used: 76185600 bytes ratio: 79.03 percent MemFree: 901932 kB Juneho reported below in his real platform with small aging. So, I think the benefit would be bigger in real aging system for a long time. - frag_ratio increased 3% (ie, higher is better) - memfree increased about 6MB - In buddy info, Normal 2^3: 4, 2^2: 1: 2^1 increased, Highmem: 2^1 21 increased frag ratio after swap fragment used : 156677 kbytes total: 166092 kbytes frag_ratio : 94 meminfo before compaction MemFree: 83724 kB Node 0, zone Normal 13642 1364 57 10 61 17 9 5 4 0 0 Node 0, zone HighMem 425 29 1 0 0 0 0 0 0 0 0 num_migrated : 23630 compaction done frag ratio after compaction used : 156673 kbytes total: 160564 kbytes frag_ratio : 97 meminfo after compaction MemFree: 89060 kB Node 0, zone Normal 14076 1544 67 14 61 17 9 5 4 0 0 Node 0, zone HighMem 863 50 1 0 0 0 0 0 0 0 0 This patchset adds more logics(about 480 lines) in zsmalloc but when I tested heavy swapin/out program, the regression for swapin/out speed is marginal because most of overheads were caused by compress/decompress and other MM reclaim stuff. This patch (of 7): Currently, handle of zsmalloc encodes object's location directly so it makes support of migration hard. This patch decouples handle and object via adding indirect layer. For that, it allocates handle dynamically and returns it to user. The handle is the address allocated by slab allocation so it's unique and we could keep object's location in the memory space allocated for handle. With it, we can change object's position without changing handle itself. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Juneho Choi <juno.choi@lge.com> Cc: Gunho Lee <gunho.lee@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12mm/zsmalloc: add statistics supportGanesh Mahendran
Keeping fragmentation of zsmalloc in a low level is our target. But now we still need to add the debug code in zsmalloc to get the quantitative data. This patch adds a new configuration CONFIG_ZSMALLOC_STAT to enable the statistics collection for developers. Currently only the objects statatitics in each class are collected. User can get the information via debugfs. cat /sys/kernel/debug/zsmalloc/zram0/... For example: After I copied "jdk-8u25-linux-x64.tar.gz" to zram with ext4 filesystem: class size obj_allocated obj_used pages_used 0 32 0 0 0 1 48 256 12 3 2 64 64 14 1 3 80 51 7 1 4 96 128 5 3 5 112 73 5 2 6 128 32 4 1 7 144 0 0 0 8 160 0 0 0 9 176 0 0 0 10 192 0 0 0 11 208 0 0 0 12 224 0 0 0 13 240 0 0 0 14 256 16 1 1 15 272 15 9 1 16 288 0 0 0 17 304 0 0 0 18 320 0 0 0 19 336 0 0 0 20 352 0 0 0 21 368 0 0 0 22 384 0 0 0 23 400 0 0 0 24 416 0 0 0 25 432 0 0 0 26 448 0 0 0 27 464 0 0 0 28 480 0 0 0 29 496 33 1 4 30 512 0 0 0 31 528 0 0 0 32 544 0 0 0 33 560 0 0 0 34 576 0 0 0 35 592 0 0 0 36 608 0 0 0 37 624 0 0 0 38 640 0 0 0 40 672 0 0 0 42 704 0 0 0 43 720 17 1 3 44 736 0 0 0 46 768 0 0 0 49 816 0 0 0 51 848 0 0 0 52 864 14 1 3 54 896 0 0 0 57 944 13 1 3 58 960 0 0 0 62 1024 4 1 1 66 1088 15 2 4 67 1104 0 0 0 71 1168 0 0 0 74 1216 0 0 0 76 1248 0 0 0 83 1360 3 1 1 91 1488 11 1 4 94 1536 0 0 0 100 1632 5 1 2 107 1744 0 0 0 111 1808 9 1 4 126 2048 4 4 2 144 2336 7 3 4 151 2448 0 0 0 168 2720 15 15 10 190 3072 28 27 21 202 3264 0 0 0 254 4096 36209 36209 36209 Total 37022 36326 36288 We can calculate the overall fragentation by the last line: Total 37022 36326 36288 (37022 - 36326) / 37022 = 1.87% Also by analysing objects alocated in every class we know why we got so low fragmentation: Most of the allocated objects is in <class 254>. And there is only 1 page in class 254 zspage. So, No fragmentation will be introduced by allocating objs in class 254. And in future, we can collect other zsmalloc statistics as we need and analyse them. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12mm/zpool: add name argument to create zpoolGanesh Mahendran
Currently the underlay of zpool: zsmalloc/zbud, do not know who creates them. There is not a method to let zsmalloc/zbud find which caller they belong to. Now we want to add statistics collection in zsmalloc. We need to name the debugfs dir for each pool created. The way suggested by Minchan Kim is to use a name passed by caller(such as zram) to create the zsmalloc pool. /sys/kernel/debug/zsmalloc/zram0 This patch adds an argument `name' to zs_create_pool() and other related functions. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-18mm/zsmalloc: adjust order of functionsGanesh Mahendran
Currently functions in zsmalloc.c does not arranged in a readable and reasonable sequence. With the more and more functions added, we may meet below inconvenience. For example: Current functions: void zs_init() { } static void get_maxobj_per_zspage() { } Then I want to add a func_1() which is called from zs_init(), and this new added function func_1() will used get_maxobj_per_zspage() which is defined below zs_init(). void func_1() { get_maxobj_per_zspage() } void zs_init() { func_1() } static void get_maxobj_per_zspage() { } This will cause compiling issue. So we must add a declaration: static void get_maxobj_per_zspage(); before func_1() if we do not put get_maxobj_per_zspage() before func_1(). In addition, puting module_[init|exit] functions at the bottom of the file conforms to our habit. So, this patch ajusts function sequence as: /* helper functions */ ... obj_location_to_handle() ... /* Some exported functions */ ... zs_map_object() zs_unmap_object() zs_malloc() zs_free() zs_init() zs_exit() Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zsmalloc: allocate exactly size of struct zs_poolGanesh Mahendran
In zs_create_pool(), we allocate memory more then sizeof(struct zs_pool) ovhd_size = roundup(sizeof(*pool), PAGE_SIZE); This patch allocate memory of exactly needed size. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zsmalloc: avoid duplicate assignment of prev_classGanesh Mahendran
In zs_create_pool(), prev_class is assigned (ZS_SIZE_CLASSES - 1) times. And the prev_class only references to the previous size_class. So we do not need unnecessary assignement. This patch assigns *prev_class* when a new size_class structure is allocated and uses prev_class to check whether the first class has been allocated. [akpm@linux-foundation.org: remove now-unused ZS_SIZE_CLASSES] Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13mm/zsmalloc: support allocating obj with size of ZS_MAX_ALLOC_SIZEMahendran Ganesh
I sent a patch [1] for unnecessary check in zsmalloc. And Minchan Kim found zsmalloc even does not support allocating an obj with the size of ZS_MAX_ALLOC_SIZE in some situations. For example: In system with 64KB PAGE_SIZE and 32 bit of physical addr. Then: ZS_MIN_ALLOC_SIZE is 32 bytes which is calculated by: MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS)) ZS_MAX_ALLOC_SIZE is 64KB(in current code, is PAGE_SIZE) ZS_SIZE_CLASS_DELTA is 256 bytes So, ZS_SIZE_CLASSES = (ZS_MAX_ALLOC_SIZE - ZS_MIN_ALLOC_SIZE) / ZS_SIZE_CLASS_DELTA + 1 = 256 In zs_create_pool(), the max size obj which can be allocated will be: ZS_MIN_ALLOC_SIZE + i * ZS_SIZE_CLASS_DELTA = 32 + 255*256 = 65312 We can see that 65312 < 65536 (ZS_MAX_ALLOC_SIZE). So we can NOT allocate objs with size ZS_MAX_ALLOC_SIZE(65536) which we promise upper users we can do. [1] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/03835.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1411.2/04534.html This patch fixes this issue by dynamiclly calculating zs_size_classes when module is loaded, allocates buffer with size ZS_MAX_ALLOC_SIZE. Then the max obj(size is ZS_MAX_ALLOC_SIZE) can be stored in it. [akpm@linux-foundation.org: restore ZS_SIZE_CLASSES to fix bisectability] Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zsmalloc: correct fragile [kmap|kunmap]_atomic useMinchan Kim
The kunmap_atomic should use virtual address getting by kmap_atomic. However, some pieces of code in zsmalloc uses modified address, not the one got by kmap_atomic for kunmap_atomic. It's okay for working because zsmalloc modifies the address inner PAGE_SIZE bounday so it works with current kmap_atomic's implementation. But it's still fragile with potential changing of kmap_atomic so let's correct it. I got a subtle bug when I implemented a new feature of zsmalloc (compaction) due to a link's mishandling (the link was over page boundary). Although it was totally my mistake, it took a while to find the cause because an unpredictable kmapped address was unmapped causing an almost random crash. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zsmalloc: fix zs_init cpu notifier error handlingSergey Senozhatsky
Mahendran Ganesh reported that zpool-enabled zsmalloc should not call zpool_unregister_driver() from zs_init() if cpu notifier registration has failed, because error handling is performed before we register the driver via zpool_register_driver() call. Factor out cpu notifier registration and unregistration code and fix zs_init() error handling. link: http://lkml.iu.edu//hypermail/linux/kernel/1411.1/04156.html [akpm@linux-foundation.org: squash bogus gcc warning] [akpm@linux-foundation.org: use __init and __exit] Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reported-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-12-13zsmalloc: merge size_class to reduce fragmentationJoonsoo Kim
zsmalloc has many size_classes to reduce fragmentation and they are in 16 bytes unit, for example, 16, 32, 48, etc., if PAGE_SIZE is 4096. And, zsmalloc has constraint that each zspage has 4 pages at maximum. In this situation, we can see interesting aspect. Let's think about size_class for 1488, 1472, ..., 1376. To prevent external fragmentation, they uses 4 pages per zspage and so all they can contain 11 objects at maximum. 16384 (4096 * 4) = 1488 * 11 + remains 16384 (4096 * 4) = 1472 * 11 + remains 16384 (4096 * 4) = ... 16384 (4096 * 4) = 1376 * 11 + remains It means that they have same characteristics and classification between them isn't needed. If we use one size_class for them, we can reduce fragementation and save some memory since both the 1488 and 1472 sized classes can only fit 11 objects into 4 pages, and an object that's 1472 bytes can fit into an object that's 1488 bytes, merging these classes to always use objects that are 1488 bytes will reduce the total number of size classes. And reducing the total number of size classes reduces overall fragmentation, because a wider range of compressed pages can fit into a single size class, leaving less unused objects in each size class. For this purpose, this patch implement size_class merging. If there is size_class that have same pages_per_zspage and same number of objects per zspage with previous size_class, we don't create new size_class. Instead, we use previous, same characteristic size_class. With this way, above example sizes (1488, 1472, ..., 1376) use just one size_class so we can get much more memory utilization. Below is result of my simple test. TEST ENV: EXT4 on zram, mount with discard option WORKLOAD: untar kernel source code, remove directory in descending order in size. (drivers arch fs sound include net Documentation firmware kernel tools) Each line represents orig_data_size, compr_data_size, mem_used_total, fragmentation overhead (mem_used - compr_data_size) and overhead ratio (overhead to compr_data_size), respectively, after untar and remove operation is executed. * untar-nomerge.out orig_size compr_size used_size overhead overhead_ratio 525.88MB 199.16MB 210.23MB 11.08MB 5.56% 288.32MB 97.43MB 105.63MB 8.20MB 8.41% 177.32MB 61.12MB 69.40MB 8.28MB 13.55% 146.47MB 47.32MB 56.10MB 8.78MB 18.55% 124.16MB 38.85MB 48.41MB 9.55MB 24.58% 103.93MB 31.68MB 40.93MB 9.25MB 29.21% 84.34MB 22.86MB 32.72MB 9.86MB 43.13% 66.87MB 14.83MB 23.83MB 9.00MB 60.70% 60.67MB 11.11MB 18.60MB 7.49MB 67.48% 55.86MB 8.83MB 16.61MB 7.77MB 88.03% 53.32MB 8.01MB 15.32MB 7.31MB 91.24% * untar-merge.out orig_size compr_size used_size overhead overhead_ratio 526.23MB 199.18MB 209.81MB 10.64MB 5.34% 288.68MB 97.45MB 104.08MB 6.63MB 6.80% 177.68MB 61.14MB 66.93MB 5.79MB 9.47% 146.83MB 47.34MB 52.79MB 5.45MB 11.51% 124.52MB 38.87MB 44.30MB 5.43MB 13.96% 104.29MB 31.70MB 36.83MB 5.13MB 16.19% 84.70MB 22.88MB 27.92MB 5.04MB 22.04% 67.11MB 14.83MB 19.26MB 4.43MB 29.86% 60.82MB 11.10MB 14.90MB 3.79MB 34.17% 55.90MB 8.82MB 12.61MB 3.79MB 42.97% 53.32MB 8.01MB 11.73MB 3.73MB 46.53% As you can see above result, merged one has better utilization (overhead ratio, 5th column) and uses less memory (mem_used_total, 3rd column). Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Luigi Semenzato <semenzato@google.com> Cc: <juno.choi@lge.com> Cc: "seungho1.park" <seungho1.park@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09zsmalloc: simplify init_zspage free obj linkingDan Streetman
Change zsmalloc init_zspage() logic to iterate through each object on each of its pages, checking the offset to verify the object is on the current page before linking it into the zspage. The current zsmalloc init_zspage free object linking code has logic that relies on there only being one page per zspage when PAGE_SIZE is a multiple of class->size. It calculates the number of objects for the current page, and iterates through all of them plus one, to account for the assumed partial object at the end of the page. While this currently works, the logic can be simplified to just link the object at each successive offset until the offset is larger than PAGE_SIZE, which does not rely on PAGE_SIZE being a multiple of class->size. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09mm/zsmalloc.c: correct comment for fullness group computationWang Sheng-Hui
The letter 'f' in "n <= N/f" stands for fullness_threshold_frac, not 1/fullness_threshold_frac. Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09zsmalloc: change return value unit of zs_get_total_size_bytesMinchan Kim
zs_get_total_size_bytes returns a amount of memory zsmalloc consumed with *byte unit* but zsmalloc operates *page unit* rather than byte unit so let's change the API so benefit we could get is that reduce unnecessary overhead (ie, change page unit with byte unit) in zsmalloc. Since return type is pages, "zs_get_total_pages" is better than "zs_get_total_size_bytes". Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-09zsmalloc: move pages_allocated to zs_poolMinchan Kim
Currently, zram has no feature to limit memory so theoretically zram can deplete system memory. Users have asked for a limit several times as even without exhaustion zram makes it hard to control memory usage of the platform. This patchset adds the feature. Patch 1 makes zs_get_total_size_bytes faster because it would be used frequently in later patches for the new feature. Patch 2 changes zs_get_total_size_bytes's return unit from bytes to page so that zsmalloc doesn't need unnecessary operation(ie, << PAGE_SHIFT). Patch 3 adds new feature. I added the feature into zram layer, not zsmalloc because limiation is zram's requirement, not zsmalloc so any other user using zsmalloc(ie, zpool) shouldn't affected by unnecessary branch of zsmalloc. In future, if every users of zsmalloc want the feature, then, we could move the feature from client side to zsmalloc easily but vice versa would be painful. Patch 4 adds news facility to report maximum memory usage of zram so that this avoids user polling frequently via /sys/block/zram0/ mem_used_total and ensures transient max are not missed. This patch (of 4): pages_allocated has counted in size_class structure and when user of zsmalloc want to see total_size_bytes, it should gather all of count from each size_class to report the sum. It's not bad if user don't see the value often but if user start to see the value frequently, it would be not a good deal for performance pov. This patch moves the count from size_class to zs_pool so it could reduce memory footprint (from [255 * 8byte] to [sizeof(atomic_long_t)]). Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Dan Streetman <ddstreet@ieee.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: <juno.choi@lge.com> Cc: <seungho1.park@lge.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by: David Horner <ds2horner@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-29mm/zpool: use prefixed module loadingKees Cook
To avoid potential format string expansion via module parameters, do not use the zpool type directly in request_module() without a format string. Additionally, to avoid arbitrary modules being loaded via zpool API (e.g. via the zswap_zpool_type module parameter) add a "zpool-" prefix to the requested module, as well as module aliases for the existing zpool types (zbud and zsmalloc). Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/zpool: zbud/zsmalloc implement zpoolDan Streetman
Update zbud and zsmalloc to implement the zpool api. [fengguang.wu@intel.com: make functions static] Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/zpool: implement common zpool api to zbud/zsmallocDan Streetman
Add zpool api. zpool provides an interface for memory storage, typically of compressed memory. Users can select what backend to use; currently the only implementations are zbud, a low density implementation with up to two compressed pages per storage page, and zsmalloc, a higher density implementation with multiple compressed pages per storage page. Signed-off-by: Dan Streetman <ddstreet@ieee.org> Tested-by: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Weijie Yang <weijie.yang@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06mm/vmalloc.c: clean up map_vm_area third argumentWANG Chao
Currently map_vm_area() takes (struct page *** pages) as third argument, and after mapping, it moves (*pages) to point to (*pages + nr_mappped_pages). It looks like this kind of increment is useless to its caller these days. The callers don't care about the increments and actually they're trying to avoid this by passing another copy to map_vm_area(). The caller can always guarantee all the pages can be mapped into vm_area as specified in first argument and the caller only cares about whether map_vm_area() fails or not. This patch cleans up the pointer movement in map_vm_area() and updates its callers accordingly. Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04zsmalloc: fixup trivial zs size classes value in commentsWeijie Yang
According to calculation, ZS_SIZE_CLASSES value is 255 on systems with 4K page size, not 254. The old value may forget count the ZS_MIN_ALLOC_SIZE in. This patch fixes this trivial issue in the comments. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04mm: replace __get_cpu_var uses with this_cpu_ptrChristoph Lameter
Replace places where __get_cpu_var() is used for an address calculation with this_cpu_ptr(). Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-20zsmalloc: Fix CPU hotplug callback registrationSrivatsa S. Bhat
Subsystems that want to register CPU hotplug callbacks, as well as perform initialization for the CPUs that are already online, often do it as shown below: get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); This is wrong, since it is prone to ABBA deadlocks involving the cpu_add_remove_lock and the cpu_hotplug.lock (when running concurrently with CPU hotplug operations). Instead, the correct and race-free way of performing the callback registration is: cpu_notifier_register_begin(); for_each_online_cpu(cpu) init_cpu(cpu); /* Note the use of the double underscored version of the API */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_notifier_register_done(); Fix the zsmalloc code by using this latter form of callback registration. Cc: Nitin Gupta <ngupta@vflare.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-30zsmalloc: add copyrightMinchan Kim
Add my copyright to the zsmalloc source code which I maintain. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>