summaryrefslogtreecommitdiff
path: root/net/batman-adv/main.c
AgeCommit message (Collapse)Author
2015-01-07batman-adv: fix misspelled wordsAntonio Quartulli
Reported-by: checkpatch Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: clear control block of received socket buffersMartin Hundebøll
Since other network components (and some drivers) uses the control block provided in skb's, the network coding feature might wrongly assume that an SKB has been decoded, and thus not try to code it with another packet again. This happens for instance when batman-adv is running on a bridge device. Fix this by clearing the control block for every received SKB. Introduced by 3c12de9a5c756b23fe7c9ab332474ece1568914c ("batman-adv: network coding - code and transmit packets if possible") Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2015-01-07batman-adv: checkpatch - Please don't use multiple blank linesAntonio Quartulli
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-01-07batman-adv: kernel doc fixes for main.{c, h}Martin Hundebøll
Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Send multicast packets to nodes with a WANT_ALL flagLinus Lüssing
With this patch a node sends IPv4 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV4 flag set and IPv6 multicast packets to nodes which have a BATADV_MCAST_WANT_ALL_IPV6 flag set, too. Why is this needed? There are scenarios involving bridges where multicast report snooping and multicast TT announcements are not sufficient, which would lead to packet loss for some nodes otherwise: MLDv1 and IGMPv1/IGMPv2 have a suppression mechanism for multicast listener reports. When we have an MLDv1/IGMPv1/IGMPv2 querier behind a bridge then our snooping bridge is potentially not going to see any reports even though listeners exist because according to RFC4541 such reports are only forwarded to multicast routers: ----------------------------------------------------------- --------------- {Querier}---|Snoop. Switch|----{Listener} --------------- \ ^ ------- | br0 | < ??? ------- \ _-~---~_ _-~/ ~-_ ~ batman-adv \-----{Sender} \~_ cloud ~/ -~~__-__-~_/ I) MLDv1 Query: {Querier} -> flooded II) MLDv1 Report: {Listener} -> {Querier} -> br0 cannot detect the {Listener} => Packets from {Sender} need to be forwarded to all detected listeners and MLDv1/IGMPv1/IGMPv2 queriers. ----------------------------------------------------------- Note that we do not need to explicitly forward to MLDv2/IGMPv3 queriers, because these protocols have no report suppression: A bridge has no trouble detecting MLDv2/IGMPv3 listeners. Even though we do not support bridges yet we need to provide the according infrastructure already to not break compatibility later. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast supportLinus Lüssing
With this patch a node may additionally perform the dropping or unicasting behaviour for a link-local IPv4 and link-local-all-nodes IPv6 multicast packet, too. The extra counter and BATADV_MCAST_WANT_ALL_UNSNOOPABLES flag is needed because with a future bridge snooping support integration a node with a bridge on top of its soft interface is not able to reliably detect its multicast listeners for IPv4 link-local and the IPv6 link-local-all-nodes addresses anymore (see RFC4541, section 2.1.2.2 and section 3). Even though this new flag does make "no difference" now, it'll ensure a seamless integration of multicast bridge support without needing to break compatibility later. Also note, that even with multicast bridge support it won't be possible to optimize 224.0.0.x and ff02::1 towards nodes with bridges, they will always receive these ranges. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Announce new capability via multicast TVLVLinus Lüssing
If the soft interface of a node is not part of a bridge then a node announces a new multicast TVLV: The existence of this TVLV signalizes that this node is announcing all of its multicast listeners via the translation table infrastructure. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: Multicast Listener Announcements via Translation TableLinus Lüssing
With this patch a node which has no bridge interface on top of its soft interface announces its local multicast listeners via the translation table. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-03-22batman-adv: prefer ether_addr_copy to memcpyAntonio Quartulli
On some architectures ether_addr_copy() is slightly faster than memcpy() therefore use the former when possible. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c net/ipv4/tcp_metrics.c Overlapping changes between the "don't create two tcp metrics objects with the same key" race fix in net and the addition of the destination address in the lookup key in net-next. Minor overlapping changes in bnx2x driver. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15batman-adv: fix batman-adv header overhead calculationMarek Lindner
Batman-adv prepends a full ethernet header in addition to its own header. This has to be reflected in the MTU calculation, especially since the value is used to set dev->hard_header_len. Introduced by 411d6ed93a5d0601980d3e5ce75de07c98e3a7de ("batman-adv: consider network coding overhead when calculating required mtu") Reported-by: cmsv <cmsv@wirelesspt.net> Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add build checks for packet sizesSimon Wunderlich
With unrolling the batadv_header into the respective structures, the offsetof checks are now useless. Instead, add build checks for all packet types which go over the wire to avoid problems with wrong sizes or compatibility issues on some architectures which don't use every day. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: create helper function to get AP isolation statusAntonio Quartulli
The AP isolation status may be evaluated in different spots. Create an helper function to avoid code duplication. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix size of batadv_icmp_headerAntonio Quartulli
struct batadv_icmp_header currently has a size of 17, which will be padded to 20 on some architectures. Fix this by unrolling the header into the parent structures. Moreover keep the ICMP parsing functions as generic as they are now by using a stub icmp_header struct during packet parsing. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-12-28batman-adv: fix header alignment by unrolling batadv_headerSimon Wunderlich
The size of the batadv_header of 3 is problematic on some architectures which automatically pad all structures to a 32 bit boundary. To not lose performance by packing this struct, better embed it into the various host structures. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-23batman-adv: add bat_neigh_is_equiv_or_better API functionAntonio Quartulli
Each routing protocol has its own metric semantic and therefore is the protocol itself the only component able to compare two metrics to check their "similarity". This new API allows each routing protocol to implement its own logic and make the external code protocol agnostic. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-23batman-adv: add bat_neigh_cmp API functionAntonio Quartulli
This new API allows to compare the two neighbours based on the metric avoiding the user to deal with any routing algorithm specific detail Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: lock around TT operations to avoid sending inconsistent dataAntonio Quartulli
A TT response may be prepared and sent while the local or global translation table is getting updated. The worst case is when one of the tables is accessed after its content has been recently updated but the metadata (TTVN/CRC) has not yet. In this case the reader will get a table content which does not match the TTVN/CRC. This will lead to an inconsistent state and so to a TT recovery. To avoid entering this situation, put a lock around those TT operations recomputing the metadata and around the TT Response creation (the latter is the only reader that accesses the metadata together with the table). Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: add per VLAN interface attribute frameworkAntonio Quartulli
Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-19batman-adv: add the VLAN ID attribute to the TT entryAntonio Quartulli
To make the translation table code VLAN-aware, each entry must carry the VLAN ID which it belongs to. This patch adds such attribute to the related TT structures. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: consider network coding overhead when calculating required mtuMarek Lindner
The module prints a warning when the MTU on the hard interface is too small to transfer payload traffic without fragmentation. The required MTU is calculated based on the encapsulation header size. If network coding is compild into the module its header size is taken into account as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: create common header for ICMP packetsAntonio Quartulli
the icmp and the icmp_rr packets share the same initial fields since they use the same code to be processed and forwarded. Extract the common fields and put them into a separate struct so that future ICMP packets can be easily added without bloating the packet definition. However, keep the seqno field outside of the newly created common header because future ICMP types may require a bigger sequence number space. This change breaks compatibility due to fields reordering in the ICMP headers. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: Receive fragmented packets and mergeMartin Hundebøll
Fragments arriving at their destination are buffered for later merge. Merged packets are passed to the main receive function as had they never been fragmented. Fragments are forwarded without merging if the MTU of the outgoing interface is smaller than the size of the merged packet. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: Remove old fragmentation codeMartin Hundebøll
Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: reorder packet typesSimon Wunderlich
Reordering the packet type numbers allows us to handle unicast packets in a general way - even if we don't know the specific packet type, we can still forward it. There was already code handling this for a couple of unicast packets, and this is the more generalized version to do that. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: add build check macros for packet member offsetSimon Wunderlich
Since we removed the __packed from most of the packets, we should make sure that the offset generated by the compiler are correct for sent/received data. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - convert roaming adv packet to use tvlv unicast packetsMarek Lindner
Instead of generating roaming specific packets the TVLV unicast API is used to send roaming information. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - convert tt query packet to use tvlv unicast packetsMarek Lindner
Instead of generating TT specific packets the TVLV unicast API is used to send translation table data. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - gateway download/upload bandwidth containerMarek Lindner
Prior to this patch batman-adv read the advertised uplink bandwidth from userspace and compressed this information into a single byte called "gateway class". Now the download & upload bandwidth information is sent as-is. No userspace change is necessary since the sysfs API always allowed to specify a bandwidth. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: tvlv - basic infrastructureMarek Lindner
The goal is to provide the infrastructure for sending, receiving and parsing information 'containers' while preserving backward compatibility. TVLV (based on the commonly known Type Length Value technique) was chosen as the format for those containers. Even if a node does not know the tvlv type of a certain container it can simply skip the current container and proceed with the next. Past experience has shown features evolve over time, so a 'version' field was added right from the start to allow differentiating between feature variants - hence the name: T(ype) V(ersion) L(ength) V(alue). This patch introduces the basic TVLV infrastructure: * register / unregister tvlv containers to be sent with each OGM (on primary interfaces only) * register / unregister callback handlers to be called upon finding the corresponding tvlv type in a tvlv buffer * unicast tvlv send / receive API calls Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Spyros Gasteratos <morfeas3000@gmail.com> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-02batman-adv: set up network coding packet handlers during module initMatthias Schiffer
batman-adv saves its table of packet handlers as a global state, so handlers must be set up only once (and setting them up a second time will fail). The recently-added network coding support tries to set up its handler each time a new softif is registered, which obviously fails when more that one softif is used (and in consequence, the softif creation fails). Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called only once) and batadv_nc_mesh_init (which is called for each softif); in addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming consistent. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-08-28batman-adv: set skb priority according to contentSimon Wunderlich
The skb priority field may help the wireless driver to choose the right queue (e.g. WMM queues). This should be set in batman-adv, as this information is only available here. This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that only VLAN PCP is used if a VLAN header is present. Also initially set TC_PRIO_CONTROL only for self-generated packets, and keep the priority set by higher layers. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-06-24net: Unmap fragment page once iterator is doneWedson Almeida Filho
Callers of skb_seq_read() are currently forced to call skb_abort_seq_read() even when consuming all the data because the last call to skb_seq_read (the one that returns 0 to indicate the end) fails to unmap the last fragment page. With this patch callers will be allowed to traverse the SKB data by calling skb_prepare_seq_read() once and repeatedly calling skb_seq_read() as originally intended (and documented in the original commit 677e90eda), that is, only call skb_abort_seq_read() if the sequential read is actually aborted. Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-21batman-adv: Avoid double freeing of bat_countersMartin Hundebøll
On errors in batadv_mesh_init(), bat_counters will be freed in both batadv_mesh_free() and batadv_softif_init_late(). This patch fixes this by returning earlier from batadv_softif_init_late() in case of errors in batadv_mesh_init() and by setting bat_counters to NULL after freeing. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-09batman-adv: reorder clean up routine in order to avoid race conditionsAntonio Quartulli
nc_worker accesses the originator table during its periodic work, but since the originator table is freed before stopping the worker this leads to a global protection fault. Fix this by killing the worker (in nc_free) before freeing the originator table. Moreover tidy up the entire clean up routine by running all the subcomponents freeing procedures first and then killing the TT and the originator tables at the end. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-09batman-adv: check proto length before accessing proto string bufferMarek Lindner
batadv_param_set_ra() strips the trailing '\n' from the supplied string buffer without checking the length of the buffer first. This patches avoids random memory access and associated potential crashes. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c drivers/net/ethernet/intel/igb/igb_main.c drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c include/net/scm.h net/batman-adv/routing.c net/ipv4/tcp_input.c The e{uid,gid} --> {uid,gid} credentials fix conflicted with the cleanup in net-next to now pass cred structs around. The be2net driver had a bug fix in 'net' that overlapped with the VLAN interface changes by Patrick McHardy in net-next. An IGB conflict existed because in 'net' the build_skb() support was reverted, and in 'net-next' there was a comment style fix within that code. Several batman-adv conflicts were resolved by making sure that all calls to batadv_is_my_mac() are changed to have a new bat_priv first argument. Eric Dumazet's TS ECR fix in TCP in 'net' conflicted with the F-RTO rewrite in 'net-next', mostly overlapping changes. Thanks to Stephen Rothwell and Antonio Quartulli for help with several of these merge resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17batman-adv: make is_my_mac() check for the current mesh onlyAntonio Quartulli
On a multi-mesh node (a node running more than one batman-adv virtual interface) batadv_is_my_mac() has to check MAC addresses of hard interfaces belonging to the current mesh only. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27batman-adv: use seq_puts instead of seq_printf when the format is constantAntonio Quartulli
As reported by checkpatch, seq_puts has to be preferred with respect to seq_printf when the format is a constant string (no va_args) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27batman-adv: Allow to use rntl_link for device creation/deletionSven Eckelmann
The sysfs configuration interface of batman-adv to add/remove soft-interfaces is not deadlock free and doesn't follow the currently common way to create new virtual interfaces. An additional interface though rtnl_link is introduced which provides easy device creation/deletion with tools like "ip": $ ip link add dev bat0 type batadv $ ip link del dev bat0 Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-13batman-adv: network coding - add the initial infrastructure codeMartin Hundebøll
Network coding exploits the 802.11 shared medium to allow multiple packets to be sent in a single transmission. In brief, a relay can XOR two packets, and send the coded packet to two destinations. The receivers can decode one of the original packets by XOR'ing the coded packet with the other original packet. This will lead to increased throughput in topologies where two packets cross one relay. In a simple topology with three nodes, it takes four transmissions without network coding to get one packet from Node A to Node B and one from Node B to Node A: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <--- p2 ---- Node R Node B 4. Node A Node R ---- p1 ---> Node B With network coding, the relay only needs one transmission, which saves us one slot of valuable airtime: 1. Node A ---- p1 ---> Node R Node B 2. Node A Node R <--- p2 ---- Node B 3. Node A <- p1 x p2 - Node R - p1 x p2 -> Node B The same principle holds for a topology including five nodes. Here the packets from Node A and Node B are overheard by Node C and Node D, respectively. This allows Node R to send a network coded packet to save one transmission: Node A Node B | \ / | | p1 p2 | | \ / | p1 > Node R < p2 | | | / \ | | p1 x p2 p1 x p2 | v / \ v / \ Node C < > Node D More information is available on the open-mesh.org wiki[1]. This patch adds the initial code to support network coding in batman-adv. It sets up a worker thread to do house keeping and adds a sysfs file to enable/disable network coding. The feature is disabled by default, as it requires a wifi-driver with working promiscuous mode, and also because it adds a small delay at each hop. [1] http://www.open-mesh.org/projects/batman-adv/wiki/Catwoman Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-02-27hlist: drop the node parameter from iteratorsSasha Levin
I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-21batman-adv: Add function to calculate crc32c for the skb payloadSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - implement local storageAntonio Quartulli
Since batman-adv cannot inter-operate with the host ARP table, this patch introduces a batman-adv private storage for ARP entries exchanged within DAT. This storage will represent the node local cache in the DAT protocol. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: add UNICAST_4ADDR packet typeAntonio Quartulli
The current unicast packet type does not contain the orig source address. This patches add a new unicast packet (called UNICAST_4ADDR) which provides two new fields: the originator source address and the subtype (the type of the data contained in the packet payload). The former is useful to identify the node which injected the packet into the network and the latter is useful to avoid creating new unicast packet types in the future: a macro defining a new subtype will be enough. Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: Check return value of try_module_getSven Eckelmann
New operations should not be started when they need an increased module reference counter and try_module_get failed. This patch addresses Coverity #712284: Unchecked return value Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>