summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2012-01-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-23Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"Gustavo F. Padovan
This reverts commit e1b6eb3ccb0c2a34302a9fd87dd15d7b86337f23. This was causing a delay of 10 seconds in the resume process of a Thinkpad laptop. I'm afraid this could affect more devices once 3.2 is released. Reported-by: Tomáš Janoušek <tomi@nomi.cz> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-18Revert "Bluetooth: Revert: Fix L2CAP connection establishment"Gustavo F. Padovan
This reverts commit 4dff523a913197e3314c7b0d08734ab037709093. It was reported that this patch cause issues when trying to connect to legacy devices so reverting it. Reported-by: David Fries <david@fries.net> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Clear RFCOMM session timer when disconnecting last channelMat Martineau
When the last RFCOMM data channel is closed, a timer is normally set up to disconnect the control channel at a later time. If the control channel disconnect command is sent with the timer pending, the timer needs to be cancelled. If the timer is not cancelled in this situation, the reference counting logic for the RFCOMM session does not work correctly when the remote device closes the L2CAP connection. The session is freed at the wrong time, leading to a kernel panic. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-18Bluetooth: Prevent uninitialized data access in L2CAP configurationMat Martineau
When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-12-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2011-12-03Bluetooth: Correct version check in hci_setupAndrei Emeltchenko
Check for hci_ver instead of lmp_ver Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-21Bluetooth: bnep: Fix module referenceDavid Herrmann
We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-21Bluetooth: cmtp: Fix module referenceDavid Herrmann
We cannot call module_put(THIS_MODULE) if this is our last reference. Otherwise, this call may cleanup our module before it returns. Gladly, the kthread API provides a simple wrapper for us. So lets use module_put_and_exit() to avoid a race condition with the module cleanup code. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-09Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2011-11-07Bluetooth: Use miliseconds for L2CAP channel timeoutsAndrzej Kaczmarek
Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) forcedeth: fix a few sparse warnings (variable shadowing) forcedeth: Improve stats counters forcedeth: remove unneeded stats updates forcedeth: Acknowledge only interrupts that are being processed forcedeth: fix race when unloading module MAINTAINERS/rds: update maintainer wanrouter: Remove kernel_lock annotations usbnet: fix oops in usbnet_start_xmit ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined etherh: Add MAINTAINERS entry for etherh bonding: comparing a u8 with -1 is always false sky2: fix regression on Yukon Optima netlink: clarify attribute length check documentation netlink: validate NLA_MSECS length i825xx:xscale:8390:freescale: Fix Kconfig dependancies macvlan: receive multicast with local address tg3: Update version to 3.121 tg3: Eliminate timer race with reset_task tg3: Schedule at most one tg3_reset_task run tg3: Obtain PCI function number from device ...
2011-11-07Bluetooth: Revert: Fix L2CAP connection establishmentArek Lichwa
This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-11-02Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31net: Fix files explicitly needing to include module.hPaul Gortmaker
With calls to modular infrastructure, these files really needs the full module.h header. Call it out so some of the cleanups of implicit and unrequired includes elsewhere can be cleaned up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Bluetooth: Set HCI_MGMT flag only in read_controller_infoJohan Hedberg
The HCI_MGMT flag should only be set when user space requests the full controller information. This way we avoid potential issues with setting change events ariving before the actual read_controller_info command finishes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-31Bluetooth: Increase HCI reset timeout in hci_dev_do_closeSzymon Janc
I've noticed that my CSR usb dongle was not working if it was plugged in when PC was booting. It looks like I get two HCI reset command complete events (see hcidump logs below). The root cause is reset called from off_timer. Timeout for this reset to complete is set to 250ms and my bt dongle requires more time for replying with command complete event. After that, chip seems to reply with reset command complete event for next non-reset command. Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is already used for timeouting hci_reset_req in hci_dev_reset(). This might also be related to BT not working after suspend that was reported here some time ago. Hcidump log: 2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0 2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000 3) plen 0 2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00 01) plen 0 2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 1.1 (0x1) HCI Revision: 0x36f LMP Version: 1.1 (0x1) LMP Subversion: 0x36f Manufacturer: Cambridge Silicon Radio (10) Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-10-18bluetooth: Properly clone LSM attributes to newly created child connectionsPaul Moore
The Bluetooth stack has internal connection handlers for all of the various Bluetooth protocols, and unfortunately, they are currently lacking the LSM hooks found in the core network stack's connection handlers. I say unfortunately, because this can cause problems for users who have have an LSM enabled and are using certain Bluetooth devices. See one problem report below: * http://bugzilla.redhat.com/show_bug.cgi?id=741703 In order to keep things simple at this point in time, this patch fixes the problem by cloning the parent socket's LSM attributes to the newly created child socket. If we decide we need a more elaborate LSM marking mechanism for Bluetooth (I somewhat doubt this) we can always revisit this decision in the future. Reported-by: James M. Cape <jcape@ignore-your.tv> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-14Bluetooth: rfcomm: Fix sleep in invalid context in rfcomm_security_cfmSzymon Janc
This was triggered by turning off encryption on ACL link when rfcomm was using high security. rfcomm_security_cfm (which is called from rx task) was closing DLC and this involves sending disconnect message (and locking socket). Move closing DLC to rfcomm_process_dlcs and only flag DLC for closure in rfcomm_security_cfm. BUG: sleeping function called from invalid context at net/core/sock.c:2032 in_atomic(): 1, irqs_disabled(): 0, pid: 1788, name: kworker/0:3 [<c0068a08>] (unwind_backtrace+0x0/0x108) from [<c05e25dc>] (dump_stack+0x20/0x24) [<c05e25dc>] (dump_stack+0x20/0x24) from [<c0087ba8>] (__might_sleep+0x110/0x12c) [<c0087ba8>] (__might_sleep+0x110/0x12c) from [<c04801d8>] (lock_sock_nested+0x2c/0x64) [<c04801d8>] (lock_sock_nested+0x2c/0x64) from [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) from [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) from [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) from [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) from [<c056b168>] (rfcomm_send_disc+0x78/0x80) [<c056b168>] (rfcomm_send_disc+0x78/0x80) from [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) from [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) from [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) from [<c0550380>] (hci_rx_task+0x1d0/0x2d0) [<c0550380>] (hci_rx_task+0x1d0/0x2d0) from [<c009ee04>] (tasklet_action+0x138/0x1e4) [<c009ee04>] (tasklet_action+0x138/0x1e4) from [<c009f21c>] (__do_softirq+0xcc/0x274) [<c009f21c>] (__do_softirq+0xcc/0x274) from [<c009f6c0>] (do_softirq+0x60/0x6c) [<c009f6c0>] (do_softirq+0x60/0x6c) from [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) from [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040d470>] (data_from_chip+0xf4/0xaec) [<c040d470>] (data_from_chip+0xf4/0xaec) from [<c04136c0>] (send_skb_to_core+0x40/0x178) [<c04136c0>] (send_skb_to_core+0x40/0x178) from [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) from [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) from [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) from [<c00b2774>] (process_one_work+0x144/0x4b8) [<c00b2774>] (process_one_work+0x144/0x4b8) from [<c00b2e8c>] (worker_thread+0x198/0x468) [<c00b2e8c>] (worker_thread+0x198/0x468) from [<c00b9bc8>] (kthread+0x98/0xa0) [<c00b9bc8>] (kthread+0x98/0xa0) from [<c0061744>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-10-11Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: Documentation/feature-removal-schedule.txt
2011-09-30Merge branch 'master' of ↵John W. Linville
git://git.infradead.org/users/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/wl12xx/main.c
2011-09-29Bluetooth: hci_le_adv_report_evt code refactoringAndre Guedes
There is no reason to treat the first advertising entry differently from the potential other ones. Besides, the current implementation can easily leads to typos. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-29Bluetooth: Fix possible NULL pointer dereferenceWaldemar Rymarkiewicz
Checking conn->pending_sec_level if there is no connection leads to potential null pointer dereference. Don't process pin_code_request_event at all if no connection exists. Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Mark not declared l2cap_core functions as staticSzymon Janc
Signed-off-by: Szymon Janc <szymon.janc@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: use recommended LE connection parametersAnderson Lizardo
The new connection parameters now match the recommended values for Proximity and Health Thermometer profiles. The previous values were ramdomly chosen, and are either too low or too high for most cases. New values: Scan Interval: 60 ms Scan Window: 30 ms Minimum Connection Interval: 50 ms Maximum Connection Interval: 70 ms Supervision Timeout: 420 ms See "Table 5.2: Recommended Scan Interval and Scan Window Values" and "Table 5.3: Recommended Connection Interval Values" for both profiles for details. Note that the "fast connection" parameters were chosen, because we do not support yet dynamically changing these parameters from initiator side. Additionally, the Proximity profile recommends (section "4.4 Alert on Link Loss"): "It is recommended that the Link Supervision Timeout (LSTO) is set to 6x the connection interval." Minimum_CE_Length and Maximum_CE_Length were also changed from 0x0001 to 0x0000 because they are informational and optional, and old value was not reflecting reality. Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Perform L2CAP SDU reassembly without copying dataMat Martineau
Use sk_buff fragment capabilities to link together incoming skbs instead of allocating a new skb for reassembly and copying. The new reassembly code works equally well for ERTM and streaming mode, so there is now one reassembly function instead of two. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Handle fragmented skbs in bt_sock_stream_recvmsg()Mat Martineau
ERTM reassembly will be more efficient when skbs are linked together rather than copying every incoming data byte. The existing stream recv function assumes skbs are linear, so it needs to know how to handle fragments before reassembly is changed. bt_sock_recvmsg() already handles fragmented skbs. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-27Bluetooth: Linearize skbs for use in BNEP, CMTP, HIDP, and RFCOMMMat Martineau
Fragmented skbs are only encountered when receiving ERTM or streaming mode L2CAP data. BNEP, CMTP, HIDP, and RFCOMM generally use basic mode, but they need to handle fragments without crashing. Signed-off-by: Mat Martineau <mathewm@codeaurora.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-21Bluetooth: mark l2cap_create_iframe_pdu as staticLuiz Augusto von Dentz
l2cap_create_iframe_pdu is only used in l2cap_core.c Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Check 'dev_class' in mgmt_device_found()Andre Guedes
The mgmt_device_found event will be used to report LE devices found during discovery procedure. Since LE advertising reports events doesn't have class of device information, we need to check if 'dev_class' is not NULL before copying it. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Reduce critical region.Andre Guedes
This patch reduces the critial region (protected by hdev->lock) in hci_cc_le_set_scan_enable(). This way, only really required code is synchronized. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix wrong memcpy size on LE start encryptionAnderson Briglia
This patch fixes wrong memcpy size when copying rand value to HCI_OP_LE_START_ENC command. The compiler pretends that the array parameter was declared as a pointer and sizeof reports the size of the pointer. [1] [1] http://www.c-faq.com/aryptr/aryparmsize.html Signed-off-by: Anderson Briglia <anderson.briglia@openbossa.org> Signed-off-by: Anderson Lizardo <anderson.lizardo@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Remove support for other SMP keys than the LTKVinicius Costa Gomes
For now, only the LTK is properly supported. We are able to receive and generate the other types of keys, but we are not able to use them. So it's better not request them to be distributed. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix not setting a pending security levelVinicius Costa Gomes
For slave initiated security, we should set a default security level, for now BT_SECURITY_MEDIUM. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Revert "Bluetooth: Add support for communicating keys with userspace"Vinicius Costa Gomes
This reverts commit 5a0a8b49746771fba79866fb9185ffa051a6a183. If we use separate messages and list for SMP specific keys we can simplify the code. Conflicts: net/bluetooth/mgmt.c Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Use the LTK after receiving a LE Security RequestVinicius Costa Gomes
When receiving a security request from the remote device we should find if there is already a LTK associated with the remote device, if found we should use it to encrypt the link. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Fix sending wrong authentication requirementsVinicius Costa Gomes
Until we support any pairing method (Passkey Entry, OOB) that gives MITM protection we shouldn't send that we have MITM protection. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add mgmt events for blacklistingAntti Julku
Add management interface events for blocking/unblocking a device. Sender of the block device command gets cmd complete and other mgmt sockets get the event. Event is also sent to mgmt sockets when blocking is done with ioctl, e.g when blocking a device with hciconfig. This makes it possible for bluetoothd to track status of blocked devices when a third party block or unblocks a device. Event sending is handled in mgmt_device_blocked function which gets called from hci_blacklist_add in hci_core.c. A pending command is added in mgmt_block_device, so that it can found when sending the event - the event is not sent to the socket from which the pending command came. Locks were moved out from hci_core.c to hci_sock.c and mgmt.c, because locking is needed also for mgmt_pending_add in mgmt.c. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Use the MEDIUM security level for pairingsVinicius Costa Gomes
This lifts the requirement of 16 digits pin codes when pairing with devices that do not support SSP when using the mgmt interface. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Require authentication if MITM protection is requestedVinicius Costa Gomes
The HIGH security level requires a 16 digit pin code for non-SSP bondings. Sometimes this requirement is not acceptable and we still want protection againts MITM attacks (which is something that the MEDIUM security level doesn't provide), for that we should allow another way to request authentication without using the HIGH security level. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Move SMP crypto functions to a workqueueVinicius Costa Gomes
The function crypto_blkcipher_setkey() called by smp_e() can sleep, so all the crypto work has to be moved to hci_dev workqueue. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Move SMP fields to a separate structureVinicius Costa Gomes
The objective is to make the core to have as little as possible information about SMP procedures and logic. Now, all the SMP specific information is hidden from the core. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: hidp: Add support for NO_INIT_REPORTS quirkDavid Herrmann
During setup the host initializes all HID reports. Some devices do not support this. If this quirk is set, we skip the initialization. See also usbhid_init_reports() for this quirk. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add LE link type for debugfs outputPeter Hurley
Add LE link type as known connection type for debugfs stringizing output. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add mgmt command for fast connectable modeAntti Julku
Add command to management interface for enabling/disabling the fast connectable mode. Signed-off-by: Antti Julku <antti.julku@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-09-21Bluetooth: Add link_type information to the mgmt Connected eventVinicius Costa Gomes
One piece of information that was lost when using the mgmt interface, was the type of the connection. Using HCI events we used to know the type of the connection based on the type of the event, e.g. HCI_LE_Connection_Complete for LE links. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-26 21:03:51 +0000