summaryrefslogtreecommitdiff
path: root/net/bluetooth
AgeCommit message (Collapse)Author
2018-04-20Bluetooth: Fix connection if directed advertising and privacy is usedSzymon Janc
commit 082f2300cfa1a3d9d5221c38c5eba85d4ab98bd8 upstream. Local random address needs to be updated before creating connection if RPA from LE Direct Advertising Report was resolved in host. Otherwise remote device might ignore connection request due to address mismatch. This was affecting following qualification test cases: GAP/CONN/SCEP/BV-03-C, GAP/CONN/GCEP/BV-05-C, GAP/CONN/DCEP/BV-05-C Before patch: < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #11350 [hci0] 84680.231216 Address: 56:BC:E8:24:11:68 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) > HCI Event: Command Complete (0x0e) plen 4 #11351 [hci0] 84680.246022 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #11352 [hci0] 84680.246417 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #11353 [hci0] 84680.248854 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11354 [hci0] 84680.249466 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #11355 [hci0] 84680.253222 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #11356 [hci0] 84680.458387 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:D6:76:8C:DF:82 (Resolvable) Identity type: Random (0x01) Identity: F2:F1:06:3D:9C:42 (Static) RSSI: -74 dBm (0xb6) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #11357 [hci0] 84680.458737 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #11358 [hci0] 84680.469982 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #11359 [hci0] 84680.470444 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 53:38:DA:46:8C:45 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #11360 [hci0] 84680.474971 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection Cancel (0x08|0x000e) plen 0 #11361 [hci0] 84682.545385 > HCI Event: Command Complete (0x0e) plen 4 #11362 [hci0] 84682.551014 LE Create Connection Cancel (0x08|0x000e) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #11363 [hci0] 84682.551074 LE Connection Complete (0x01) Status: Unknown Connection Identifier (0x02) Handle: 0 Role: Master (0x00) Peer address type: Public (0x00) Peer address: 00:00:00:00:00:00 (OUI 00-00-00) Connection interval: 0.00 msec (0x0000) Connection latency: 0 (0x0000) Supervision timeout: 0 msec (0x0000) Master clock accuracy: 0x00 After patch: < HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7 #210 [hci0] 667.152459 Type: Passive (0x00) Interval: 60.000 msec (0x0060) Window: 30.000 msec (0x0030) Own address type: Random (0x01) Filter policy: Accept all advertisement, inc. directed unresolved RPA (0x02) > HCI Event: Command Complete (0x0e) plen 4 #211 [hci0] 667.153613 LE Set Scan Parameters (0x08|0x000b) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #212 [hci0] 667.153704 Scanning: Enabled (0x01) Filter duplicates: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 #213 [hci0] 667.154584 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 18 #214 [hci0] 667.182619 LE Direct Advertising Report (0x0b) Num reports: 1 Event type: Connectable directed - ADV_DIRECT_IND (0x01) Address type: Random (0x01) Address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Direct address type: Random (0x01) Direct address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) RSSI: -70 dBm (0xba) < HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2 #215 [hci0] 667.182704 Scanning: Disabled (0x00) Filter duplicates: Disabled (0x00) > HCI Event: Command Complete (0x0e) plen 4 #216 [hci0] 667.183599 LE Set Scan Enable (0x08|0x000c) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Random Address (0x08|0x0005) plen 6 #217 [hci0] 667.183645 Address: 7C:C1:57:A5:B7:A8 (Resolvable) Identity type: Random (0x01) Identity: F4:28:73:5D:38:B0 (Static) > HCI Event: Command Complete (0x0e) plen 4 #218 [hci0] 667.184590 LE Set Random Address (0x08|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: LE Create Connection (0x08|0x000d) plen 25 #219 [hci0] 667.184613 Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Filter policy: White list is not used (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Own address type: Random (0x01) Min connection interval: 30.00 msec (0x0018) Max connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 #220 [hci0] 667.186558 LE Create Connection (0x08|0x000d) ncmd 1 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 19 #221 [hci0] 667.485824 LE Connection Complete (0x01) Status: Success (0x00) Handle: 0 Role: Master (0x00) Peer address type: Random (0x01) Peer address: 50:52:D9:A6:48:A0 (Resolvable) Identity type: Public (0x00) Identity: 11:22:33:44:55:66 (OUI 11-22-33) Connection interval: 50.00 msec (0x0028) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x07 @ MGMT Event: Device Connected (0x000b) plen 13 {0x0002} [hci0] 667.485996 LE Address: 11:22:33:44:55:66 (OUI 11-22-33) Flags: 0x00000000 Data length: 0 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13Bluetooth: Send HCI Set Event Mask Page 2 command only when neededMarcel Holtmann
[ Upstream commit 313f6888c8fbb1bc8b36c9012ce4e1de848df696 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08Bluetooth: Fix missing encryption refresh on Security RequestSzymon Janc
commit 64e759f58f128730b97a3c3a26d283c075ad7c86 upstream. If Security Request is received on connection that is already encrypted with sufficient security master should perform encryption key refresh procedure instead of just ignoring Slave Security Request (Core Spec 5.0 Vol 3 Part H 2.4.6). > ACL Data RX: Handle 3585 flags 0x02 dlen 6 SMP: Security Request (0x0b) len 1 Authentication requirement: Bonding, No MITM, SC, No Keypresses (0x09) < HCI Command: LE Start Encryption (0x08|0x0019) plen 28 Handle: 3585 Random number: 0x0000000000000000 Encrypted diversifier: 0x0000 Long term key: 44264272a5c426a9e868f034cf0e69f3 > HCI Event: Command Status (0x0f) plen 4 LE Start Encryption (0x08|0x0019) ncmd 1 Status: Success (0x00) > HCI Event: Encryption Key Refresh Complete (0x30) plen 3 Status: Success (0x00) Handle: 3585 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22Bluetooth: 6lowpan: fix delay work init in add_peer_chan()Michael Scott
[ Upstream commit d2891c4d071d807f01cc911dc42a68f4568d65cf ] When adding 6lowpan devices very rapidly we sometimes see a crash: [23122.306615] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.9.0-43-arm64 #1 Debian 4.9.9.linaro.43-1 [23122.315400] Hardware name: HiKey Development Board (DT) [23122.320623] task: ffff800075443080 task.stack: ffff800075484000 [23122.326551] PC is at expire_timers+0x70/0x150 [23122.330907] LR is at run_timer_softirq+0xa0/0x1a0 [23122.335616] pc : [<ffff000008142dd8>] lr : [<ffff000008142f58>] pstate: 600001c5 This was due to add_peer_chan() unconditionally initializing the lowpan_btle_dev->notify_peers delayed work structure, even if the lowpan_btle_dev passed into add_peer_chan() had previously been initialized. Normally, this would go unnoticed as the delayed work timer is set for 100 msec, however when calling add_peer_chan() faster than 100 msec it clears out a previously queued delay work causing the crash above. To fix this, let add_peer_chan() know when a new lowpan_btle_dev is passed in so that it only performs the delay work initialization when needed. Signed-off-by: Michael Scott <michael.scott@linaro.org> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22Bluetooth: Avoid bt_accept_unlink() double unlinkingDean Jenkins
[ Upstream commit 27bfbc21a0c0f711fa5382de026c7c0700c9ea28 ] There is a race condition between a thread calling bt_accept_dequeue() and a different thread calling bt_accept_unlink(). Protection against concurrency is implemented using sk locking. However, sk locking causes serialisation of the bt_accept_dequeue() and bt_accept_unlink() threads. This serialisation can cause bt_accept_dequeue() to obtain the sk from the parent list but becomes blocked waiting for the sk lock held by the bt_accept_unlink() thread. bt_accept_unlink() unlinks sk and this thread releases the sk lock unblocking bt_accept_dequeue() which potentially runs bt_accept_unlink() again on the same sk causing a crash. The attempt to double unlink the same sk from the parent list can cause a NULL pointer dereference crash due to bt_sk(sk)->parent becoming NULL on the first unlink, followed by the second unlink trying to execute bt_sk(sk)->parent->sk_ack_backlog-- in bt_accept_unlink() which crashes. When sk is in the parent list, bt_sk(sk)->parent will be not be NULL. When sk is removed from the parent list, bt_sk(sk)->parent is set to NULL. Therefore, add a defensive check for bt_sk(sk)->parent not being NULL to ensure that sk is still in the parent list after the sk lock has been taken in bt_accept_dequeue(). If bt_sk(sk)->parent is detected as being NULL then restart the loop so that the loop variables are refreshed to use the latest values. This is necessary as list_for_each_entry_safe() is not thread safe so causing a risk of an infinite loop occurring as sk could point to itself. In addition, in bt_accept_dequeue() increase the sk reference count to protect against early freeing of sk. Early freeing can be possible if the bt_accept_unlink() thread calls l2cap_sock_kill() or rfcomm_sock_kill() functions before bt_accept_dequeue() gets the sk lock. For test purposes, the probability of failure can be increased by putting a msleep of 1 second in bt_accept_dequeue() between getting the sk and waiting for the sk lock. This exposes the fact that the loop list_for_each_entry_safe(p, n, &bt_sk(parent)->accept_q) is not safe from threads that unlink sk from the list in parallel with the loop which can cause sk to become stale within the loop. Signed-off-by: Dean Jenkins <Dean_Jenkins@mentor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17Bluetooth: Prevent stack info leak from the EFS element.Ben Seri
commit 06e7e776ca4d36547e503279aeff996cbb292c16 upstream. In the function l2cap_parse_conf_rsp and in the function l2cap_parse_conf_req the following variable is declared without initialization: struct l2cap_conf_efs efs; In addition, when parsing input configuration parameters in both of these functions, the switch case for handling EFS elements may skip the memcpy call that will write to the efs variable: ... case L2CAP_CONF_EFS: if (olen == sizeof(efs)) memcpy(&efs, (void *)val, olen); ... The olen in the above if is attacker controlled, and regardless of that if, in both of these functions the efs variable would eventually be added to the outgoing configuration request that is being built: l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS, sizeof(efs), (unsigned long) &efs); So by sending a configuration request, or response, that contains an L2CAP_CONF_EFS element, but with an element length that is not sizeof(efs) - the memcpy to the uninitialized efs variable can be avoided, and the uninitialized variable would be returned to the attacker (16 bytes). This issue has been assigned CVE-2017-1000410 Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Signed-off-by: Ben Seri <ben@armis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-13Bluetooth: Properly check L2CAP config option output buffer lengthBen Seri
commit e860d2c904d1a9f38a24eb44c9f34b8f915a6ea3 upstream. Validate the output buffer length for L2CAP config requests and responses to avoid overflowing the stack buffer used for building the option blocks. Signed-off-by: Ben Seri <ben@armis.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30Bluetooth: bnep: fix possible might sleep error in bnep_sessionJeffy Chen
commit 25717382c1dd0ddced2059053e3ca5088665f7a5 upstream. It looks like bnep_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: AL Yu-Chen Cho <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30Bluetooth: cmtp: fix possible might sleep error in cmtp_sessionJeffy Chen
commit f06d977309d09253c744e54e75c5295ecc52b7b4 upstream. It looks like cmtp_session has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: AL Yu-Chen Cho <acho@suse.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-30Bluetooth: hidp: fix possible might sleep error in hidp_session_threadJeffy Chen
commit 5da8e47d849d3d37b14129f038782a095b9ad049 upstream. It looks like hidp_session_thread has same pattern as the issue reported in old rfcomm: while (1) { set_current_state(TASK_INTERRUPTIBLE); if (condition) break; // may call might_sleep here schedule(); } __set_current_state(TASK_RUNNING); Which fixed at: dfb2fae Bluetooth: Fix nested sleeps So let's fix it at the same way, also follow the suggestion of: https://lwn.net/Articles/628628/ Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Tested-by: AL Yu-Chen Cho <acho@suse.com> Tested-by: Rohit Vaswani <rvaswani@nvidia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-27Bluetooth: use constant time memory comparison for secret valuesJason A. Donenfeld
commit 329d82309824ff1082dc4a91a5bbed8c3bec1580 upstream. This file is filled with complex cryptography. Thus, the comparisons of MACs and secret keys and curve points and so forth should not add timing attacks, which could either result in a direct forgery, or, given the complexity, some other type of attack. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-20Bluetooth: Fix user channel for 32bit userspace on 64bit kernelSzymon Janc
commit ab89f0bdd63a3721f7cd3f064f39fc4ac7ca14d4 upstream. Running 32bit userspace on 64bit kernel results in MSG_CMSG_COMPAT being defined as 0x80000000. This results in sendmsg failure if used from 32bit userspace running on 64bit kernel. Fix this by accounting for MSG_CMSG_COMPAT in flags check in hci_sock_sendmsg. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marko Kiiskila <marko@runtime.io> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-22Bluetooth: Fix using the correct source address typeJohan Hedberg
The hci_get_route() API is used to look up local HCI devices, however so far it has been incapable of dealing with anything else than the public address of HCI devices. This completely breaks with LE-only HCI devices that do not come with a public address, but use a static random address instead. This patch exteds the hci_get_route() API with a src_type parameter that's used for comparing with the right address of each HCI device. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-19Bluetooth: Fix append max 11 bytes of name to scan rsp dataMichał Narajowski
Append maximum of 10 + 1 bytes of name to scan response data. Complete name is appended only if exists and is <= 10 characters. Else append short name if exists or shorten complete name if not. This makes sure name is consistent across multiple advertising instances. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06Bluetooth: Refactor append name and appearanceMichał Narajowski
Use eir_append_data to remove code duplication. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06Bluetooth: Add appearance to default scan rsp dataMichał Narajowski
Add appearance value to beginning of scan rsp data for default advertising instance if the value is not 0. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-10-06Bluetooth: Fix local name in scan rspMichał Narajowski
Use complete name if it fits. If not and there is short name check if it fits. If not then use shortened name as prefix of complete name. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: Fix not updating scan rsp when adv offMichał Narajowski
Scan response data should not be updated unless there is an advertising instance. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-22Bluetooth: Fix NULL pointer dereference in mgmt contextArek Lichwa
Adds missing callback assignment to cmd_complete in pending management command context. Dump path involves security procedure performed on legacy (pre-SSP) devices with service security requirements set to HIGH (16digits PIN). It fails when shorter PIN is delivered by user. [ 1.517950] Bluetooth: PIN code is not 16 bytes long [ 1.518491] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1.518584] IP: [< (null)>] (null) [ 1.518584] PGD 9e08067 PUD 9fdf067 PMD 0 [ 1.518584] Oops: 0010 [#1] SMP [ 1.518584] Modules linked in: [ 1.518584] CPU: 0 PID: 1002 Comm: kworker/u3:2 Not tainted 4.8.0-rc6-354649-gaf4168c #16 [ 1.518584] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.9.3-20160701_074356-anatol 04/01/2014 [ 1.518584] Workqueue: hci0 hci_rx_work [ 1.518584] task: ffff880009ce14c0 task.stack: ffff880009e10000 [ 1.518584] RIP: 0010:[<0000000000000000>] [< (null)>] (null) [ 1.518584] RSP: 0018:ffff880009e13bc8 EFLAGS: 00010293 [ 1.518584] RAX: 0000000000000000 RBX: ffff880009eed100 RCX: 0000000000000006 [ 1.518584] RDX: ffff880009ddc000 RSI: 0000000000000000 RDI: ffff880009eed100 [ 1.518584] RBP: ffff880009e13be0 R08: 0000000000000000 R09: 0000000000000001 [ 1.518584] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 1.518584] R13: ffff880009e13ccd R14: ffff880009ddc000 R15: ffff880009ddc010 [ 1.518584] FS: 0000000000000000(0000) GS:ffff88000bc00000(0000) knlGS:0000000000000000 [ 1.518584] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.518584] CR2: 0000000000000000 CR3: 0000000009fdd000 CR4: 00000000000006f0 [ 1.518584] Stack: [ 1.518584] ffffffff81909808 ffff880009e13cce ffff880009e0d40b ffff880009e13c68 [ 1.518584] ffffffff818f428d 00000000024000c0 ffff880009e13c08 ffffffff810ca903 [ 1.518584] ffff880009e13c48 ffffffff811ade34 ffffffff8178c31f ffff880009ee6200 [ 1.518584] Call Trace: [ 1.518584] [<ffffffff81909808>] ? mgmt_pin_code_neg_reply_complete+0x38/0x60 [ 1.518584] [<ffffffff818f428d>] hci_cmd_complete_evt+0x69d/0x3200 [ 1.518584] [<ffffffff810ca903>] ? rcu_read_lock_sched_held+0x53/0x60 [ 1.518584] [<ffffffff811ade34>] ? kmem_cache_alloc+0x1a4/0x200 [ 1.518584] [<ffffffff8178c31f>] ? skb_clone+0x4f/0xa0 [ 1.518584] [<ffffffff818f9d81>] hci_event_packet+0x8e1/0x28e0 [ 1.518584] [<ffffffff81a421f1>] ? _raw_spin_unlock_irqrestore+0x31/0x50 [ 1.518584] [<ffffffff810aea3e>] ? trace_hardirqs_on_caller+0xee/0x1b0 [ 1.518584] [<ffffffff818e6bd1>] hci_rx_work+0x1e1/0x5b0 [ 1.518584] [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0 [ 1.518584] [<ffffffff8107e538>] process_one_work+0x268/0x6b0 [ 1.518584] [<ffffffff8107e4bd>] ? process_one_work+0x1ed/0x6b0 [ 1.518584] [<ffffffff8107e9c3>] worker_thread+0x43/0x4e0 [ 1.518584] [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0 [ 1.518584] [<ffffffff8107e980>] ? process_one_work+0x6b0/0x6b0 [ 1.518584] [<ffffffff8108505f>] kthread+0xdf/0x100 [ 1.518584] [<ffffffff81a4297f>] ret_from_fork+0x1f/0x40 [ 1.518584] [<ffffffff81084f80>] ? kthread_create_on_node+0x210/0x210 Signed-off-by: Arek Lichwa <arek.lichwa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Set appearance only for LE capable controllersMichał Narajowski
Setting appearance on controllers without LE support will result in No Supported error. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix missing ext info event when setting appearanceMichał Narajowski
This patch adds missing event when setting appearance, just like in the set local name command. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add supported data types to ext info changed eventMichał Narajowski
This patch adds EIR data to extended info changed event. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add appearance to Read Ext Controller Info commandSzymon Janc
If LE is enabled appearance is added to EIR data. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Factor appending EIR to separate helperMichał Narajowski
This will also be used for Extended Information Event handling. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Refactor read_ext_controller_info handlerSzymon Janc
There is no need to allocate heap for reply only to copy stack data to it. This also fix rp memory leak and missing hdev unlock if kmalloc failed. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Increment management interface revisionSzymon Janc
Increment the mgmt revision due to the recently added Read Extended Controller Information and Set Appearance commands. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix advertising instance validity check for flagsSzymon Janc
Flags are not allowed in Scan Response. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Unify advertising instance flags checkSzymon Janc
This unifies max length and TLV validity checks. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Remove unused parameter from tlv_data_is_valid functionSzymon Janc
hdev parameter is not used in function. Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for appearance in scan rspMichał Narajowski
This patch enables prepending appearance value to scan response data. It also adds support for setting appearance value through mgmt command. If currently advertised instance has apperance flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for local name in scan rspMichał Narajowski
This patch enables appending local name to scan response data. If currently advertised instance has name flag set it is expired immediately. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix not registering BR/EDR SMP channel with force_bredr flagSzymon Janc
If force_bredr is set SMP BR/EDR channel should also be for non-SC capable controllers. Since hcidev flag is persistent wrt power toggle it can be already set when calling smp_register(). This resulted in SMP BR/EDR channel not being registered even if HCI_FORCE_BREDR_SMP flag was set. This also fix NULL pointer dereference when trying to disable force_bredr after power cycle. BUG: unable to handle kernel NULL pointer dereference at 0000000000000388 IP: [<ffffffffc0493ad8>] smp_del_chan+0x18/0x80 [bluetooth] Call Trace: [<ffffffffc04950ca>] force_bredr_smp_write+0xba/0x100 [bluetooth] [<ffffffff8133be14>] full_proxy_write+0x54/0x90 [<ffffffff81245967>] __vfs_write+0x37/0x160 [<ffffffff813617f7>] ? selinux_file_permission+0xd7/0x110 [<ffffffff81356fbd>] ? security_file_permission+0x3d/0xc0 [<ffffffff810eb5b2>] ? percpu_down_read+0x12/0x50 [<ffffffff812462a5>] vfs_write+0xb5/0x1a0 [<ffffffff812476f5>] SyS_write+0x55/0xc0 [<ffffffff817eb872>] entry_SYSCALL_64_fastpath+0x1a/0xa4 Code: 48 8b 45 f0 eb c1 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 05 c6 3b 02 00 04 55 48 89 e5 41 54 53 49 89 fc 75 4b <49> 8b 9c 24 88 03 00 00 48 85 db 74 31 49 c7 84 24 88 03 00 00 RIP [<ffffffffc0493ad8>] smp_del_chan+0x18/0x80 [bluetooth] RSP <ffff8802aee3bd90> CR2: 0000000000000388 Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Use kzalloc instead of kmalloc/memsetWei Yongjun
Use kzalloc rather than kmalloc followed by memset with 0. Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix reason code used for rejecting SCO connectionsFrédéric Dalleau
A comment in the code states that SCO connection should be rejected with the proper error value between 0xd-0xf. The code uses HCI_ERROR_REMOTE_LOW_RESOURCES which is 0x14. This led to following error: < HCI Command: Reject Synchronous Co.. (0x01|0x002a) plen 7 Address: 34:51:C9:EF:02:CA (Apple, Inc.) Reason: Remote Device Terminated due to Low Resources (0x14) > HCI Event: Command Status (0x0f) plen 4 Reject Synchronous Connection Request (0x01|0x002a) ncmd 1 Status: Invalid HCI Command Parameters (0x12) Instead make use of HCI_ERROR_REJ_LIMITED_RESOURCES which is 0xd. Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.co.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Fix wrong New Settings event when closing HCI User ChannelMarcel Holtmann
When closing HCI User Channel, the New Settings event was send out to inform about changed settings. However such event is wrong since the exclusive HCI User Channel access is active until the Index Added event has been sent. @ USER Close: test @ MGMT Event: New Settings (0x0006) plen 4 Current settings: 0x00000ad0 Bondable Secure Simple Pairing BR/EDR Low Energy Secure Connections = Close Index: 00:14:EF:22:04:12 @ MGMT Event: Index Added (0x0004) plen 0 Calling __mgmt_power_off from hci_dev_do_close requires an extra check for an active HCI User Channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI user channelsMarcel Holtmann
When opening and closing HCI user channel, send monitoring messages to be able to trace its behavior. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Append local name and CoD to Extended Controller InfoMichał Narajowski
This adds device class, complete local name and short local name to EIR data in Extended Controller Info as specified in docs. Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add framework for Extended Controller InformationMarcel Holtmann
This command is used to retrieve the current state and basic information of a controller. It is typically used right after getting the response to the Read Controller Index List command or an Index Added event (or its extended counterparts). When any of the values in the EIR_Data field changes, the event Extended Controller Information Changed will be used to inform clients about the updated information. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
2016-09-19Bluetooth: Handle HCI raw socket transition from unbound to boundMarcel Holtmann
In case an unbound HCI raw socket is later on bound, ensure that the monitor notification messages indicate a close and re-open. None of the userspace tools use the socket this, but it is actually possible to use an ioctl on an unbound socket and then later bind it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close messages for HCI raw socketsMarcel Holtmann
When opening and closing HCI raw sockets their main usage is for legacy userspace. To track interaction with the modern mgmt interface, send open and close monitoring messages for these action. The HCI raw sockets is special since it supports unbound ioctl operation and for that special case delay the notification message until at least one ioctl has been executed. The difference between a bound and unbound socket will be detailed by the fact the HCI index is present or not. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Add extra channel checks for control open/close messagesMarcel Holtmann
The control open and close monitoring events require special channel checks to ensure messages are only send when the right events happen. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Assign the channel early when binding HCI socketsMarcel Holtmann
Assignment of the hci_pi(sk)->channel should be done early when binding the HCI socket. This avoids confusion with the RAW channel that is used for legacy access. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Send control open and close only when cookie is presentMarcel Holtmann
Only when the cookie has been assigned, then send the open and close monitor messages. Also if the socket is bound to a device, then include the index into the message. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use numbers for subsystem version stringMarcel Holtmann
Instead of keeping a version string around, use version and revision numbers and then stringify them for use as module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Introduce helper functions for socket cookie handlingMarcel Holtmann
Instead of manually allocating cookie information each time, use helper functions for generating and releasing cookies. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use command status event for Set IO Capability errorsMarcel Holtmann
In case of failure, the Set IO Capability command is suppose to return command status and not command complete. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Fix wrong Get Clock Information return parametersMarcel Holtmann
The address information of the Get Clock Information return parameters is copying from a different memory location. It uses &cmd->param while it actually needs to be cmd->param. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: Use individual flags for certain management eventsMarcel Holtmann
Instead of hiding everything behind a general managment events flag, introduce indivdual flags that allow fine control over which events are send to a given management channel. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2016-09-19Bluetooth: mgmt: Fix sending redundant event for Advertising InstanceJohan Hedberg
When an Advertising Instance is removed, the Advertising Removed event shouldn't be sent to the same socket that issued the Remove Advertising command (it gets a command complete event instead). The mgmt_advertising_removed() function already has a parameter for skipping a specific socket, but there was no code to propagate the right value to this parameter. This patch fixes the issue by making sure the intermediate hci_req_clear_adv_instance() function gets the socket pointer. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2016-09-19Bluetooth: Add support for sending MGMT commands and events to monitorMarcel Holtmann
This adds support for tracing all management commands and events via the monitor interface. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-09 05:21:10 +0000