summaryrefslogtreecommitdiff
path: root/net/ipv4
AgeCommit message (Collapse)Author
2015-01-27tcp: Do not apply TSO segment limit to non-TSO packetsHerbert Xu
[ Upstream commit 843925f33fcc293d80acf2c5c8a78adf3344d49b ] Thomas Jarosch reported IPsec TCP stalls when a PMTU event occurs. In fact the problem was completely unrelated to IPsec. The bug is also reproducible if you just disable TSO/GSO. The problem is that when the MSS goes down, existing queued packet on the TX queue that have not been transmitted yet all look like TSO packets and get treated as such. This then triggers a bug where tcp_mss_split_point tells us to generate a zero-sized packet on the TX queue. Once that happens we're screwed because the zero-sized packet can never be removed by ACKs. Fixes: 1485348d242 ("tcp: Apply device TSO segment limit earlier") Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Cheers, Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27gre: fix the inner mac header in nbma tunnel xmit pathTimo Teräs
[ Upstream commit 8a0033a947403569caeca45fa5e6f7ba60d51974 ] The NBMA GRE tunnels temporarily push GRE header that contain the per-packet NBMA destination on the skb via header ops early in xmit path. It is the later pulled before the real GRE header is constructed. The inner mac was thus set differently in nbma case: the GRE header has been pushed by neighbor layer, and mac header points to beginning of the temporary gre header (set by dev_queue_xmit). Now that the offloads expect mac header to point to the gre payload, fix the xmit patch to: - pull first the temporary gre header away - and reset mac header to point to gre payload This fixes tso to work again with nbma tunnels. Fixes: 14051f0452a2 ("gre: Use inner mac length when computing tunnel length") Signed-off-by: Timo Teräs <timo.teras@iki.fi> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16gre: Set inner mac header in gro completeTom Herbert
[ Upstream commit 6fb2a756739aa507c1fd5b8126f0bfc2f070dc46 ] Set the inner mac header to point to the GRE payload when doing GRO. This is needed if we proceed to send the packet through GRE GSO which now uses the inner mac header instead of inner network header to determine the length of encapsulation headers. Fixes: 14051f0452a2 ("gre: Use inner mac length when computing tunnel length") Reported-by: Wolfgang Walter <linux@stwm.de> Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-16ip_tunnel: the lack of vti_link_ops' dellink() cause kernel paniclucien
[ Upstream commit 20ea60ca9952bd19d4b0d74719daba305aef5178 ] Now the vti_link_ops do not point the .dellink, for fb tunnel device (ip_vti0), the net_device will be removed as the default .dellink is unregister_netdevice_queue,but the tunnel still in the tunnel list, then if we add a new vti tunnel, in ip_tunnel_find(): hlist_for_each_entry_rcu(t, head, hash_node) { if (local == t->parms.iph.saddr && remote == t->parms.iph.daddr && link == t->parms.link && ==> type == t->dev->type && ip_tunnel_key_match(&t->parms, flags, key)) break; } the panic will happen, cause dev of ip_tunnel *t is null: [ 3835.072977] IP: [<ffffffffa04103fd>] ip_tunnel_find+0x9d/0xc0 [ip_tunnel] [ 3835.073008] PGD b2c21067 PUD b7277067 PMD 0 [ 3835.073008] Oops: 0000 [#1] SMP ..... [ 3835.073008] Stack: [ 3835.073008] ffff8800b72d77f0 ffffffffa0411924 ffff8800bb956000 ffff8800b72d78e0 [ 3835.073008] ffff8800b72d78a0 0000000000000000 ffffffffa040d100 ffff8800b72d7858 [ 3835.073008] ffffffffa040b2e3 0000000000000000 0000000000000000 0000000000000000 [ 3835.073008] Call Trace: [ 3835.073008] [<ffffffffa0411924>] ip_tunnel_newlink+0x64/0x160 [ip_tunnel] [ 3835.073008] [<ffffffffa040b2e3>] vti_newlink+0x43/0x70 [ip_vti] [ 3835.073008] [<ffffffff8150d4da>] rtnl_newlink+0x4fa/0x5f0 [ 3835.073008] [<ffffffff812f68bb>] ? nla_strlcpy+0x5b/0x70 [ 3835.073008] [<ffffffff81508fb0>] ? rtnl_link_ops_get+0x40/0x60 [ 3835.073008] [<ffffffff8150d11f>] ? rtnl_newlink+0x13f/0x5f0 [ 3835.073008] [<ffffffff81509cf4>] rtnetlink_rcv_msg+0xa4/0x270 [ 3835.073008] [<ffffffff8126adf5>] ? sock_has_perm+0x75/0x90 [ 3835.073008] [<ffffffff81509c50>] ? rtnetlink_rcv+0x30/0x30 [ 3835.073008] [<ffffffff81529e39>] netlink_rcv_skb+0xa9/0xc0 [ 3835.073008] [<ffffffff81509c48>] rtnetlink_rcv+0x28/0x30 .... modprobe ip_vti ip link del ip_vti0 type vti ip link add ip_vti0 type vti rmmod ip_vti do that one or more times, kernel will panic. fix it by assigning ip_tunnel_dellink to vti_link_ops' dellink, in which we skip the unregister of fb tunnel device. do the same on ip6_vti. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06net/ping: handle protocol mismatching scenarioJane Zhou
commit 91a0b603469069cdcce4d572b7525ffc9fd352a6 upstream. ping_lookup() may return a wrong sock if sk_buff's and sock's protocols dont' match. For example, sk_buff's protocol is ETH_P_IPV6, but sock's sk_family is AF_INET, in that case, if sk->sk_bound_dev_if is zero, a wrong sock will be returned. the fix is to "continue" the searching, if no matching, return NULL. Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Signed-off-by: Jane Zhou <a17711@motorola.com> Signed-off-by: Yiwei Zhao <gbjc64@motorola.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06ipv4: Fix incorrect error code when adding an unreachable routePanu Matilainen
[ Upstream commit 49dd18ba4615eaa72f15c9087dea1c2ab4744cf5 ] Trying to add an unreachable route incorrectly returns -ESRCH if if custom FIB rules are present: [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: Network is unreachable [root@localhost ~]# ip rule add to 55.66.77.88 table 200 [root@localhost ~]# ip route add 74.125.31.199 dev eth0 via 1.2.3.4 RTNETLINK answers: No such process [root@localhost ~]# Commit 83886b6b636173b206f475929e58fac75c6f2446 ("[NET]: Change "not found" return value for rule lookup") changed fib_rules_lookup() to use -ESRCH as a "not found" code internally, but for user space it should be translated into -ENETUNREACH. Handle the translation centrally in ipv4-specific fib_lookup(), leaving the DECnet case alone. On a related note, commit b7a71b51ee37d919e4098cd961d59a883fd272d8 ("ipv4: removed redundant conditional") removed a similar translation from ip_route_input_slow() prematurely AIUI. Fixes: b7a71b51ee37 ("ipv4: removed redundant conditional") Signed-off-by: Panu Matilainen <pmatilai@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ipv4: dst_entry leak in ip_send_unicast_reply()Vasily Averin
[ Upstream commit 4062090e3e5caaf55bed4523a69f26c3265cc1d2 ] ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork and in case errors in __ip_append_data() nobody frees stolen dst entry Fixes: 2e77d89b2fa8 ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()") Signed-off-by: Vasily Averin <vvs@parallels.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14gre: Use inner mac length when computing tunnel lengthTom Herbert
[ Upstream commit 14051f0452a2c26a3f4791e6ad6a435e8f1945ff ] Currently, skb_inner_network_header is used but this does not account for Ethernet header for ETH_P_TEB. Use skb_inner_mac_header which handles TEB and also should work with IP encapsulation in which case inner mac and inner network headers are the same. Tested: Ran TCP_STREAM over GRE, worked as expected. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14tcp: md5: do not use alloc_percpu()Eric Dumazet
[ Upstream commit 349ce993ac706869d553a1816426d3a4bfda02b1 ] percpu tcp_md5sig_pool contains memory blobs that ultimately go through sg_set_buf(). -> sg_set_page(sg, virt_to_page(buf), buflen, offset_in_page(buf)); This requires that whole area is in a physically contiguous portion of memory. And that @buf is not backed by vmalloc(). Given that alloc_percpu() can use vmalloc() areas, this does not fit the requirements. Replace alloc_percpu() by a static DEFINE_PER_CPU() as tcp_md5sig_pool is small anyway, there is no gain to dynamically allocate it. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 765cf9976e93 ("tcp: md5: remove one indirection level in tcp_md5sig_pool") Reported-by: Crestez Dan Leonard <cdleonard@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ipv4: fix a potential use after free in ip_tunnel_core.cLi RongQing
[ Upstream commit 1245dfc8cadb258386fcd27df38215a0eccb1f17 ] pskb_may_pull() maybe change skb->data and make eth pointer oboslete, so set eth after pskb_may_pull() Fixes:3d7b46cd("ip_tunnel: push generic protocol handling to ip_tunnel module") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14ipv4: fix nexthop attlen check in fib_nh_matchJiri Pirko
[ Upstream commit f76936d07c4eeb36d8dbb64ebd30ab46ff85d9f7 ] fib_nh_match does not match nexthops correctly. Example: ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \ nexthop via 192.168.122.13 dev eth0 ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \ nexthop via 192.168.122.15 dev eth0 Del command is successful and route is removed. After this patch applied, the route is correctly matched and result is: RTNETLINK answers: No such process Please consider this for stable trees as well. Fixes: 4e902c57417c4 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15tcp: fixing TLP's FIN recoveryPer Hurtig
[ Upstream commit bef1909ee3ed1ca39231b260a8d3b4544ecd0c8f ] Fix to a problem observed when losing a FIN segment that does not contain data. In such situations, TLP is unable to recover from *any* tail loss and instead adds at least PTO ms to the retransmission process, i.e., RTO = RTO + PTO. Signed-off-by: Per Hurtig <per.hurtig@kau.se> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Nandita Dukkipati <nanditad@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15xfrm: Generate blackhole routes only from route lookup functionsSteffen Klassert
[ Upstream commit f92ee61982d6da15a9e49664ecd6405a15a2ee56 ] Currently we genarate a blackhole route route whenever we have matching policies but can not resolve the states. Here we assume that dst_output() is called to kill the balckholed packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating blackhole routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: 2774c131b1d ("xfrm: Handle blackhole route creation via afinfo.") Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15tcp: fix ssthresh and undo for consecutive short FRTO episodesNeal Cardwell
[ Upstream commit 0c9ab09223fe9922baeb22546c9a90d774a4bde6 ] Fix TCP FRTO logic so that it always notices when snd_una advances, indicating that any RTO after that point will be a new and distinct loss episode. Previously there was a very specific sequence that could cause FRTO to fail to notice a new loss episode had started: (1) RTO timer fires, enter FRTO and retransmit packet 1 in write queue (2) receiver ACKs packet 1 (3) FRTO sends 2 more packets (4) RTO timer fires again (should start a new loss episode) The problem was in step (3) above, where tcp_process_loss() returned early (in the spot marked "Step 2.b"), so that it never got to the logic to clear icsk_retransmits. Thus icsk_retransmits stayed non-zero. Thus in step (4) tcp_enter_loss() would see the non-zero icsk_retransmits, decide that this RTO is not a new episode, and decide not to cut ssthresh and remember the current cwnd and ssthresh for undo. There were two main consequences to the bug that we have observed. First, ssthresh was not decreased in step (4). Second, when there was a series of such FRTO (1-4) sequences that happened to be followed by an FRTO undo, we would restore the cwnd and ssthresh from before the entire series started (instead of the cwnd and ssthresh from before the most recent RTO). This could result in cwnd and ssthresh being restored to values much bigger than the proper values. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Fixes: e33099f96d99c ("tcp: implement RFC5682 F-RTO") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15tcp: fix tcp_release_cb() to dispatch via address family for mtu_reduced()Neal Cardwell
[ Upstream commit 4fab9071950c2021d846e18351e0f46a1cffd67b ] Make sure we use the correct address-family-specific function for handling MTU reductions from within tcp_release_cb(). Previously AF_INET6 sockets were incorrectly always using the IPv6 code path when sometimes they were handling IPv4 traffic and thus had an IPv4 dst. Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Diagnosed-by: Willem de Bruijn <willemb@google.com> Fixes: 563d34d057862 ("tcp: dont drop MTU reduction indications") Reviewed-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-15tcp: don't use timestamp from repaired skb-s to calculate RTT (v2)Andrey Vagin
[ Upstream commit 9d186cac7ffb1831e9f34cb4a3a8b22abb9dd9d4 ] We don't know right timestamp for repaired skb-s. Wrong RTT estimations isn't good, because some congestion modules heavily depends on it. This patch adds the TCPCB_REPAIRED flag, which is included in TCPCB_RETRANS. Thanks to Eric for the advice how to fix this issue. This patch fixes the warning: [ 879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380() [ 879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1 [ 879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 879.568177] 0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2 [ 879.568776] 0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80 [ 879.569386] ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc [ 879.569982] Call Trace: [ 879.570264] [<ffffffff817aa2d2>] dump_stack+0x4d/0x66 [ 879.570599] [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0 [ 879.570935] [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20 [ 879.571292] [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380 [ 879.571614] [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710 [ 879.571958] [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370 [ 879.572315] [<ffffffff81657459>] release_sock+0x89/0x1d0 [ 879.572642] [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860 [ 879.573000] [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80 [ 879.573352] [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40 [ 879.573678] [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20 [ 879.574031] [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0 [ 879.574393] [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b [ 879.574730] ---[ end trace a17cbc38eb8c5c00 ]--- v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit, where it's set for other skb-s. Fixes: 431a91242d8d ("tcp: timestamp SYN+DATA messages") Fixes: 740b0f1841f6 ("tcp: switch rtt estimations to usec resolution") Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-14tcp: Fix integer-overflow in TCP vegasChristoph Paasch
[ Upstream commit 1f74e613ded11517db90b2bd57e9464d9e0fb161 ] In vegas we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. Then, we need to do do_div to allow this to be used on 32-bit arches. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Doug Leith <doug.leith@nuim.ie> Fixes: 8d3a564da34e (tcp: tcp_vegas cong avoid fix) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-14tcp: Fix integer-overflows in TCP venoChristoph Paasch
[ Upstream commit 45a07695bc64b3ab5d6d2215f9677e5b8c05a7d0 ] In veno we do a multiplication of the cwnd and the rtt. This may overflow and thus their result is stored in a u64. However, we first need to cast the cwnd so that actually 64-bit arithmetic is done. A first attempt at fixing 76f1017757aa0 ([TCP]: TCP Veno congestion control) was made by 159131149c2 (tcp: Overflow bug in Vegas), but it failed to add the required cast in tcp_veno_cong_avoid(). Fixes: 76f1017757aa0 ([TCP]: TCP Veno congestion control) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-14ip_tunnel(ipv4): fix tunnels with "local any remote $remote_ip"Dmitry Popov
[ Upstream commit 95cb5745983c222867cc9ac593aebb2ad67d72c0 ] Ipv4 tunnels created with "local any remote $ip" didn't work properly since 7d442fab0 (ipv4: Cache dst in tunnels). 99% of packets sent via those tunnels had src addr = 0.0.0.0. That was because only dst_entry was cached, although fl4.saddr has to be cached too. Every time ip_tunnel_xmit used cached dst_entry (tunnel_rtable_get returned non-NULL), fl4.saddr was initialized with tnl_params->saddr (= 0 in our case), and wasn't changed until iptunnel_xmit(). This patch adds saddr to ip_tunnel->dst_cache, fixing this issue. Reported-by: Sergey Popov <pinkbyte@gentoo.org> Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-14ip: make IP identifiers less predictableEric Dumazet
[ Upstream commit 04ca6973f7c1a0d8537f2d9906a0cf8e69886d75 ] In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and Jedidiah describe ways exploiting linux IP identifier generation to infer whether two machines are exchanging packets. With commit 73f156a6e8c1 ("inetpeer: get rid of ip_id_count"), we changed IP id generation, but this does not really prevent this side-channel technique. This patch adds a random amount of perturbation so that IP identifiers for a given destination [1] are no longer monotonically increasing after an idle period. Note that prandom_u32_max(1) returns 0, so if generator is used at most once per jiffy, this patch inserts no hole in the ID suite and do not increase collision probability. This is jiffies based, so in the worst case (HZ=1000), the id can rollover after ~65 seconds of idle time, which should be fine. We also change the hash used in __ip_select_ident() to not only hash on daddr, but also saddr and protocol, so that ICMP probes can not be used to infer information for other protocols. For IPv6, adds saddr into the hash as well, but not nexthdr. If I ping the patched target, we can see ID are now hard to predict. 21:57:11.008086 IP (...) A > target: ICMP echo request, seq 1, length 64 21:57:11.010752 IP (... id 2081 ...) target > A: ICMP echo reply, seq 1, length 64 21:57:12.013133 IP (...) A > target: ICMP echo request, seq 2, length 64 21:57:12.015737 IP (... id 3039 ...) target > A: ICMP echo reply, seq 2, length 64 21:57:13.016580 IP (...) A > target: ICMP echo request, seq 3, length 64 21:57:13.019251 IP (... id 3437 ...) target > A: ICMP echo reply, seq 3, length 64 [1] TCP sessions uses a per flow ID generator not changed by this patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jeffrey Knockel <jeffk@cs.unm.edu> Reported-by: Jedidiah R. Crandall <crandall@cs.unm.edu> Cc: Willy Tarreau <w@1wt.eu> Cc: Hannes Frederic Sowa <hannes@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-14inetpeer: get rid of ip_id_countEric Dumazet
[ Upstream commit 73f156a6e8c1074ac6327e0abd1169e95eb66463 ] Ideally, we would need to generate IP ID using a per destination IP generator. linux kernels used inet_peer cache for this purpose, but this had a huge cost on servers disabling MTU discovery. 1) each inet_peer struct consumes 192 bytes 2) inetpeer cache uses a binary tree of inet_peer structs, with a nominal size of ~66000 elements under load. 3) lookups in this tree are hitting a lot of cache lines, as tree depth is about 20. 4) If server deals with many tcp flows, we have a high probability of not finding the inet_peer, allocating a fresh one, inserting it in the tree with same initial ip_id_count, (cf secure_ip_id()) 5) We garbage collect inet_peer aggressively. IP ID generation do not have to be 'perfect' Goal is trying to avoid duplicates in a short period of time, so that reassembly units have a chance to complete reassembly of fragments belonging to one message before receiving other fragments with a recycled ID. We simply use an array of generators, and a Jenkin hash using the dst IP as a key. ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it belongs (it is only used from this file) secure_ip_id() and secure_ipv6_id() no longer are needed. Rename ip_select_ident_more() to ip_select_ident_segs() to avoid unnecessary decrement/increment of the number of segments. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28ipv4: fix buffer overflow in ip_options_compile()Eric Dumazet
[ Upstream commit 10ec9472f05b45c94db3c854d22581a20b97db41 ] There is a benign buffer overflow in ip_options_compile spotted by AddressSanitizer[1] : Its benign because we always can access one extra byte in skb->head (because header is followed by struct skb_shared_info), and in this case this byte is not even used. [28504.910798] ================================================================== [28504.912046] AddressSanitizer: heap-buffer-overflow in ip_options_compile [28504.913170] Read of size 1 by thread T15843: [28504.914026] [<ffffffff81802f91>] ip_options_compile+0x121/0x9c0 [28504.915394] [<ffffffff81804a0d>] ip_options_get_from_user+0xad/0x120 [28504.916843] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.918175] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.919490] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.920835] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.922208] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.923459] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.924722] [28504.925106] Allocated by thread T15843: [28504.925815] [<ffffffff81804995>] ip_options_get_from_user+0x35/0x120 [28504.926884] [<ffffffff8180dedf>] do_ip_setsockopt.isra.15+0x8df/0x1630 [28504.927975] [<ffffffff8180ec60>] ip_setsockopt+0x30/0xa0 [28504.929175] [<ffffffff8181e59b>] tcp_setsockopt+0x5b/0x90 [28504.930400] [<ffffffff8177462f>] sock_common_setsockopt+0x5f/0x70 [28504.931677] [<ffffffff817729c2>] SyS_setsockopt+0xa2/0x140 [28504.932851] [<ffffffff818cfb69>] system_call_fastpath+0x16/0x1b [28504.934018] [28504.934377] The buggy address ffff880026382828 is located 0 bytes to the right [28504.934377] of 40-byte region [ffff880026382800, ffff880026382828) [28504.937144] [28504.937474] Memory state around the buggy address: [28504.938430] ffff880026382300: ........ rrrrrrrr rrrrrrrr rrrrrrrr [28504.939884] ffff880026382400: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.941294] ffff880026382500: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.942504] ffff880026382600: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.943483] ffff880026382700: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28504.944511] >ffff880026382800: .....rrr rrrrrrrr rrrrrrrr rrrrrrrr [28504.945573] ^ [28504.946277] ffff880026382900: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.094949] ffff880026382a00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.096114] ffff880026382b00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.097116] ffff880026382c00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.098472] ffff880026382d00: ffffffff rrrrrrrr rrrrrrrr rrrrrrrr [28505.099804] Legend: [28505.100269] f - 8 freed bytes [28505.100884] r - 8 redzone bytes [28505.101649] . - 8 allocated bytes [28505.102406] x=1..7 - x allocated bytes + (8-x) redzone bytes [28505.103637] ================================================================== [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28net-gre-gro: Fix a bug that breaks the forwarding pathJerry Chu
[ Upstream commit c3caf1192f904de2f1381211f564537235d50de3 ] Fixed a bug that was introduced by my GRE-GRO patch (bf5a755f5e9186406bbf50f4087100af5bd68e40 net-gre-gro: Add GRE support to the GRO stack) that breaks the forwarding path because various GSO related fields were not set. The bug will cause on the egress path either the GSO code to fail, or a GRE-TSO capable (NETIF_F_GSO_GRE) NICs to choke. The following fix has been tested for both cases. Signed-off-by: H.K. Jerry Chu <hkchu@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28tcp: fix false undo corner casesYuchung Cheng
[ Upstream commit 6e08d5e3c8236e7484229e46fdf92006e1dd4c49 ] The undo code assumes that, upon entering loss recovery, TCP 1) always retransmit something 2) the retransmission never fails locally (e.g., qdisc drop) so undo_marker is set in tcp_enter_recovery() and undo_retrans is incremented only when tcp_retransmit_skb() is successful. When the assumption is broken because TCP's cwnd is too small to retransmit or the retransmit fails locally. The next (DUP)ACK would incorrectly revert the cwnd and the congestion state in tcp_try_undo_dsack() or tcp_may_undo(). Subsequent (DUP)ACKs may enter the recovery state. The sender repeatedly enter and (incorrectly) exit recovery states if the retransmits continue to fail locally while receiving (DUP)ACKs. The fix is to initialize undo_retrans to -1 and start counting on the first retransmission. Always increment undo_retrans even if the retransmissions fail locally because they couldn't cause DSACKs to undo the cwnd reduction. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28igmp: fix the problem when mc leave groupdingtianhong
[ Upstream commit 52ad353a5344f1f700c5b777175bdfa41d3cd65a ] The problem was triggered by these steps: 1) create socket, bind and then setsockopt for add mc group. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("192.168.1.2"); setsockopt(sockfd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq)); 2) drop the mc group for this socket. mreq.imr_multiaddr.s_addr = inet_addr("255.0.0.37"); mreq.imr_interface.s_addr = inet_addr("0.0.0.0"); setsockopt(sockfd, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq)); 3) and then drop the socket, I found the mc group was still used by the dev: netstat -g Interface RefCnt Group --------------- ------ --------------------- eth2 1 255.0.0.37 Normally even though the IP_DROP_MEMBERSHIP return error, the mc group still need to be released for the netdev when drop the socket, but this process was broken when route default is NULL, the reason is that: The ip_mc_leave_group() will choose the in_dev by the imr_interface.s_addr, if input addr is NULL, the default route dev will be chosen, then the ifindex is got from the dev, then polling the inet->mc_list and return -ENODEV, but if the default route dev is NULL, the in_dev and ifIndex is both NULL, when polling the inet->mc_list, the mc group will be released from the mc_list, but the dev didn't dec the refcnt for this mc group, so when dropping the socket, the mc_list is NULL and the dev still keep this group. v1->v2: According Hideaki's suggestion, we should align with IPv6 (RFC3493) and BSDs, so I add the checking for the in_dev before polling the mc_list, make sure when we remove the mc group, dec the refcnt to the real dev which was using the mc address. The problem would never happened again. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28ipv4: icmp: Fix pMTU handling for rare caseEdward Allcutt
[ Upstream commit 68b7107b62983f2cff0948292429d5f5999df096 ] Some older router implementations still send Fragmentation Needed errors with the Next-Hop MTU field set to zero. This is explicitly described as an eventuality that hosts must deal with by the standard (RFC 1191) since older standards specified that those bits must be zero. Linux had a generic (for all of IPv4) implementation of the algorithm described in the RFC for searching a list of MTU plateaus for a good value. Commit 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") removed this as part of the changes to remove the routing cache. Subsequently any Fragmentation Needed packet with a zero Next-Hop MTU has been discarded without being passed to the per-protocol handlers or notifying userspace for raw sockets. When there is a router which does not implement RFC 1191 on an MTU limited path then this results in stalled connections since large packets are discarded and the local protocols are not notified so they never attempt to lower the pMTU. One example I have seen is an OpenBSD router terminating IPSec tunnels. It's worth pointing out that this case is distinct from the BSD 4.2 bug which incorrectly calculated the Next-Hop MTU since the commit in question dismissed that as a valid concern. All of the per-protocols handlers implement the simple approach from RFC 1191 of immediately falling back to the minimum value. Although this is sub-optimal it is vastly preferable to connections hanging indefinitely. Remove the Next-Hop MTU != 0 check and allow such packets to follow the normal path. Fixes: 46517008e116 ("ipv4: Kill ip_rt_frag_needed().") Signed-off-by: Edward Allcutt <edward.allcutt@openmarket.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28tcp: Fix divide by zero when pushing during tcp-repairChristoph Paasch
[ Upstream commit 5924f17a8a30c2ae18d034a86ee7581b34accef6 ] When in repair-mode and TCP_RECV_QUEUE is set, we end up calling tcp_push with mss_now being 0. If data is in the send-queue and tcp_set_skb_tso_segs gets called, we crash because it will divide by mss_now: [ 347.151939] divide error: 0000 [#1] SMP [ 347.152907] Modules linked in: [ 347.152907] CPU: 1 PID: 1123 Comm: packetdrill Not tainted 3.16.0-rc2 #4 [ 347.152907] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 347.152907] task: f5b88540 ti: f3c82000 task.ti: f3c82000 [ 347.152907] EIP: 0060:[<c1601359>] EFLAGS: 00210246 CPU: 1 [ 347.152907] EIP is at tcp_set_skb_tso_segs+0x49/0xa0 [ 347.152907] EAX: 00000b67 EBX: f5acd080 ECX: 00000000 EDX: 00000000 [ 347.152907] ESI: f5a28f40 EDI: f3c88f00 EBP: f3c83d10 ESP: f3c83d00 [ 347.152907] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 347.152907] CR0: 80050033 CR2: 083158b0 CR3: 35146000 CR4: 000006b0 [ 347.152907] Stack: [ 347.152907] c167f9d9 f5acd080 000005b4 00000002 f3c83d20 c16013e6 f3c88f00 f5acd080 [ 347.152907] f3c83da0 c1603b5a f3c83d38 c10a0188 00000000 00000000 f3c83d84 c10acc85 [ 347.152907] c1ad5ec0 00000000 00000000 c1ad679c 010003e0 00000000 00000000 f3c88fc8 [ 347.152907] Call Trace: [ 347.152907] [<c167f9d9>] ? apic_timer_interrupt+0x2d/0x34 [ 347.152907] [<c16013e6>] tcp_init_tso_segs+0x36/0x50 [ 347.152907] [<c1603b5a>] tcp_write_xmit+0x7a/0xbf0 [ 347.152907] [<c10a0188>] ? up+0x28/0x40 [ 347.152907] [<c10acc85>] ? console_unlock+0x295/0x480 [ 347.152907] [<c10ad24f>] ? vprintk_emit+0x1ef/0x4b0 [ 347.152907] [<c1605716>] __tcp_push_pending_frames+0x36/0xd0 [ 347.152907] [<c15f4860>] tcp_push+0xf0/0x120 [ 347.152907] [<c15f7641>] tcp_sendmsg+0xf1/0xbf0 [ 347.152907] [<c116d920>] ? kmem_cache_free+0xf0/0x120 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c106a682>] ? __sigqueue_free+0x32/0x40 [ 347.152907] [<c114f0f0>] ? do_wp_page+0x3e0/0x850 [ 347.152907] [<c161c36a>] inet_sendmsg+0x4a/0xb0 [ 347.152907] [<c1150269>] ? handle_mm_fault+0x709/0xfb0 [ 347.152907] [<c15a006b>] sock_aio_write+0xbb/0xd0 [ 347.152907] [<c1180b79>] do_sync_write+0x69/0xa0 [ 347.152907] [<c1181023>] vfs_write+0x123/0x160 [ 347.152907] [<c1181d55>] SyS_write+0x55/0xb0 [ 347.152907] [<c167f0d8>] sysenter_do_call+0x12/0x28 This can easily be reproduced with the following packetdrill-script (the "magic" with netem, sk_pacing and limit_output_bytes is done to prevent the kernel from pushing all segments, because hitting the limit without doing this is not so easy with packetdrill): 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +0.1 < . 1:1(0) ack 1 win 65000 +0 accept(3, ..., ...) = 4 // This forces that not all segments of the snd-queue will be pushed +0 `tc qdisc add dev tun0 root netem delay 10ms` +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=2` +0 setsockopt(4, SOL_SOCKET, 47, [2], 4) = 0 +0 write(4,...,10000) = 10000 +0 write(4,...,10000) = 10000 // Set tcp-repair stuff, particularly TCP_RECV_QUEUE +0 setsockopt(4, SOL_TCP, 19, [1], 4) = 0 +0 setsockopt(4, SOL_TCP, 20, [1], 4) = 0 // This now will make the write push the remaining segments +0 setsockopt(4, SOL_SOCKET, 47, [20000], 4) = 0 +0 `sysctl -w net.ipv4.tcp_limit_output_bytes=130000` // Now we will crash +0 write(4,...,1000) = 1000 This happens since ec3423257508 (tcp: fix retransmission in repair mode). Prior to that, the call to tcp_push was prevented by a check for tp->repair. The patch fixes it, by adding the new goto-label out_nopush. When exiting tcp_sendmsg and a push is not required, which is the case for tp->repair, we go to this label. When repairing and calling send() with TCP_RECV_QUEUE, the data is actually put in the receive-queue. So, no push is required because no data has been added to the send-queue. Cc: Andrew Vagin <avagin@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Fixes: ec3423257508 (tcp: fix retransmission in repair mode) Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be> Acked-by: Andrew Vagin <avagin@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28ipv4: irq safe sk_dst_[re]set() and ipv4_sk_update_pmtu() fixEric Dumazet
[ Upstream commit 7f502361531e9eecb396cf99bdc9e9a59f7ebd7f ] We have two different ways to handle changes to sk->sk_dst First way (used by TCP) assumes socket lock is owned by caller, and use no extra lock : __sk_dst_set() & __sk_dst_reset() Another way (used by UDP) uses sk_dst_lock because socket lock is not always taken. Note that sk_dst_lock is not softirq safe. These ways are not inter changeable for a given socket type. ipv4_sk_update_pmtu(), added in linux-3.8, added a race, as it used the socket lock as synchronization, but users might be UDP sockets. Instead of converting sk_dst_lock to a softirq safe version, use xchg() as we did for sk_rx_dst in commit e47eb5dfb296b ("udp: ipv4: do not use sk_dst_lock from softirq context") In a follow up patch, we probably can remove sk_dst_lock, as it is only used in IPv6. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Fixes: 9cb3a50c5f63e ("ipv4: Invalidate the socket cached route on pmtu events if possible") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28ipv4: fix dst race in sk_dst_get()Eric Dumazet
[ Upstream commit f88649721268999bdff09777847080a52004f691 ] When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dormando <dormando@rydia.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28tcp: fix tcp_match_skb_to_sack() for unaligned SACK at end of an skbNeal Cardwell
[ Upstream commit 2cd0d743b05e87445c54ca124a9916f22f16742e ] If there is an MSS change (or misbehaving receiver) that causes a SACK to arrive that covers the end of an skb but is less than one MSS, then tcp_match_skb_to_sack() was rounding up pkt_len to the full length of the skb ("Round if necessary..."), then chopping all bytes off the skb and creating a zero-byte skb in the write queue. This was visible now because the recently simplified TLP logic in bef1909ee3ed1c ("tcp: fixing TLP's FIN recovery") could find that 0-byte skb at the end of the write queue, and now that we do not check that skb's length we could send it as a TLP probe. Consider the following example scenario: mss: 1000 skb: seq: 0 end_seq: 4000 len: 4000 SACK: start_seq: 3999 end_seq: 4000 The tcp_match_skb_to_sack() code will compute: in_sack = false pkt_len = start_seq - TCP_SKB_CB(skb)->seq = 3999 - 0 = 3999 new_len = (pkt_len / mss) * mss = (3999/1000)*1000 = 3000 new_len += mss = 4000 Previously we would find the new_len > skb->len check failing, so we would fall through and set pkt_len = new_len = 4000 and chop off pkt_len of 4000 from the 4000-byte skb, leaving a 0-byte segment afterward in the write queue. With this new commit, we notice that the new new_len >= skb->len check succeeds, so that we return without trying to fragment. Fixes: adb92db857ee ("tcp: Make SACK code to split only at mss boundaries") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-28ip_tunnel: fix ip_tunnel_lookupDmitry Popov
[ Upstream commit e0056593b61253f1a8a9941dacda22e73b963cdc ] This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26udp: ipv4: do not waste time in __udp4_lib_mcast_demux_lookupEric Dumazet
[ Upstream commit 63c6f81cdde58c41da62a8d8a209592e42a0203e ] Its too easy to add thousand of UDP sockets on a particular bucket, and slow down an innocent multicast receiver. Early demux is supposed to be an optimization, we should avoid spending too much time in it. It is interesting to note __udp4_lib_demux_lookup() only tries to match first socket in the chain. 10 is the threshold we already have in __udp4_lib_lookup() to switch to secondary hash. Fixes: 421b3885bf6d5 ("udp: ipv4: Add udp early demux") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: David Held <drheld@google.com> Cc: Shawn Bohrer <sbohrer@rgmadvisors.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ipv4: fix a race in ip4_datagram_release_cb()Eric Dumazet
[ Upstream commit 9709674e68646cee5a24e3000b3558d25412203a ] Alexey gave a AddressSanitizer[1] report that finally gave a good hint at where was the origin of various problems already reported by Dormando in the past [2] Problem comes from the fact that UDP can have a lockless TX path, and concurrent threads can manipulate sk_dst_cache, while another thread, is holding socket lock and calls __sk_dst_set() in ip4_datagram_release_cb() (this was added in linux-3.8) It seems that all we need to do is to use sk_dst_check() and sk_dst_set() so that all the writers hold same spinlock (sk->sk_dst_lock) to prevent corruptions. TCP stack do not need this protection, as all sk_dst_cache writers hold the socket lock. [1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel AddressSanitizer: heap-use-after-free in ipv4_dst_check Read of size 2 by thread T15453: [<ffffffff817daa3a>] ipv4_dst_check+0x1a/0x90 ./net/ipv4/route.c:1116 [<ffffffff8175b789>] __sk_dst_check+0x89/0xe0 ./net/core/sock.c:531 [<ffffffff81830a36>] ip4_datagram_release_cb+0x46/0x390 ??:0 [<ffffffff8175eaea>] release_sock+0x17a/0x230 ./net/core/sock.c:2413 [<ffffffff81830882>] ip4_datagram_connect+0x462/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 Freed by thread T15455: [<ffffffff8178d9b8>] dst_destroy+0xa8/0x160 ./net/core/dst.c:251 [<ffffffff8178de25>] dst_release+0x45/0x80 ./net/core/dst.c:280 [<ffffffff818304c1>] ip4_datagram_connect+0xa1/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 Allocated by thread T15453: [<ffffffff8178d291>] dst_alloc+0x81/0x2b0 ./net/core/dst.c:171 [<ffffffff817db3b7>] rt_dst_alloc+0x47/0x50 ./net/ipv4/route.c:1406 [< inlined >] __ip_route_output_key+0x3e8/0xf70 __mkroute_output ./net/ipv4/route.c:1939 [<ffffffff817dde08>] __ip_route_output_key+0x3e8/0xf70 ./net/ipv4/route.c:2161 [<ffffffff817deb34>] ip_route_output_flow+0x14/0x30 ./net/ipv4/route.c:2249 [<ffffffff81830737>] ip4_datagram_connect+0x317/0x5d0 ??:0 [<ffffffff81846d06>] inet_dgram_connect+0x76/0xd0 ./net/ipv4/af_inet.c:534 [<ffffffff817580ac>] SYSC_connect+0x15c/0x1c0 ./net/socket.c:1701 [<ffffffff817596ce>] SyS_connect+0xe/0x10 ./net/socket.c:1682 [<ffffffff818b0a29>] system_call_fastpath+0x16/0x1b ./arch/x86/kernel/entry_64.S:629 [2] <4>[196727.311203] general protection fault: 0000 [#1] SMP <4>[196727.311224] Modules linked in: xt_TEE xt_dscp xt_DSCP macvlan bridge coretemp crc32_pclmul ghash_clmulni_intel gpio_ich microcode ipmi_watchdog ipmi_devintf sb_edac edac_core lpc_ich mfd_core tpm_tis tpm tpm_bios ipmi_si ipmi_msghandler isci igb libsas i2c_algo_bit ixgbe ptp pps_core mdio <4>[196727.311333] CPU: 17 PID: 0 Comm: swapper/17 Not tainted 3.10.26 #1 <4>[196727.311344] Hardware name: Supermicro X9DRi-LN4+/X9DR3-LN4+/X9DRi-LN4+/X9DR3-LN4+, BIOS 3.0 07/05/2013 <4>[196727.311364] task: ffff885e6f069700 ti: ffff885e6f072000 task.ti: ffff885e6f072000 <4>[196727.311377] RIP: 0010:[<ffffffff815f8c7f>] [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80 <4>[196727.311399] RSP: 0018:ffff885effd23a70 EFLAGS: 00010282 <4>[196727.311409] RAX: dead000000200200 RBX: ffff8854c398ecc0 RCX: 0000000000000040 <4>[196727.311423] RDX: dead000000100100 RSI: dead000000100100 RDI: dead000000200200 <4>[196727.311437] RBP: ffff885effd23a80 R08: ffffffff815fd9e0 R09: ffff885d5a590800 <4>[196727.311451] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>[196727.311464] R13: ffffffff81c8c280 R14: 0000000000000000 R15: ffff880e85ee16ce <4>[196727.311510] FS: 0000000000000000(0000) GS:ffff885effd20000(0000) knlGS:0000000000000000 <4>[196727.311554] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[196727.311581] CR2: 00007a46751eb000 CR3: 0000005e65688000 CR4: 00000000000407e0 <4>[196727.311625] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>[196727.311669] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>[196727.311713] Stack: <4>[196727.311733] ffff8854c398ecc0 ffff8854c398ecc0 ffff885effd23ab0 ffffffff815b7f42 <4>[196727.311784] ffff88be6595bc00 ffff8854c398ecc0 0000000000000000 ffff8854c398ecc0 <4>[196727.311834] ffff885effd23ad0 ffffffff815b86c6 ffff885d5a590800 ffff8816827821c0 <4>[196727.311885] Call Trace: <4>[196727.311907] <IRQ> <4>[196727.311912] [<ffffffff815b7f42>] dst_destroy+0x32/0xe0 <4>[196727.311959] [<ffffffff815b86c6>] dst_release+0x56/0x80 <4>[196727.311986] [<ffffffff81620bd5>] tcp_v4_do_rcv+0x2a5/0x4a0 <4>[196727.312013] [<ffffffff81622b5a>] tcp_v4_rcv+0x7da/0x820 <4>[196727.312041] [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360 <4>[196727.312070] [<ffffffff815de02d>] ? nf_hook_slow+0x7d/0x150 <4>[196727.312097] [<ffffffff815fd9e0>] ? ip_rcv_finish+0x360/0x360 <4>[196727.312125] [<ffffffff815fda92>] ip_local_deliver_finish+0xb2/0x230 <4>[196727.312154] [<ffffffff815fdd9a>] ip_local_deliver+0x4a/0x90 <4>[196727.312183] [<ffffffff815fd799>] ip_rcv_finish+0x119/0x360 <4>[196727.312212] [<ffffffff815fe00b>] ip_rcv+0x22b/0x340 <4>[196727.312242] [<ffffffffa0339680>] ? macvlan_broadcast+0x160/0x160 [macvlan] <4>[196727.312275] [<ffffffff815b0c62>] __netif_receive_skb_core+0x512/0x640 <4>[196727.312308] [<ffffffff811427fb>] ? kmem_cache_alloc+0x13b/0x150 <4>[196727.312338] [<ffffffff815b0db1>] __netif_receive_skb+0x21/0x70 <4>[196727.312368] [<ffffffff815b0fa1>] netif_receive_skb+0x31/0xa0 <4>[196727.312397] [<ffffffff815b1ae8>] napi_gro_receive+0xe8/0x140 <4>[196727.312433] [<ffffffffa00274f1>] ixgbe_poll+0x551/0x11f0 [ixgbe] <4>[196727.312463] [<ffffffff815fe00b>] ? ip_rcv+0x22b/0x340 <4>[196727.312491] [<ffffffff815b1691>] net_rx_action+0x111/0x210 <4>[196727.312521] [<ffffffff815b0db1>] ? __netif_receive_skb+0x21/0x70 <4>[196727.312552] [<ffffffff810519d0>] __do_softirq+0xd0/0x270 <4>[196727.312583] [<ffffffff816cef3c>] call_softirq+0x1c/0x30 <4>[196727.312613] [<ffffffff81004205>] do_softirq+0x55/0x90 <4>[196727.312640] [<ffffffff81051c85>] irq_exit+0x55/0x60 <4>[196727.312668] [<ffffffff816cf5c3>] do_IRQ+0x63/0xe0 <4>[196727.312696] [<ffffffff816c5aaa>] common_interrupt+0x6a/0x6a <4>[196727.312722] <EOI> <1>[196727.313071] RIP [<ffffffff815f8c7f>] ipv4_dst_destroy+0x4f/0x80 <4>[196727.313100] RSP <ffff885effd23a70> <4>[196727.313377] ---[ end trace 64b3f14fae0f2e29 ]--- <0>[196727.380908] Kernel panic - not syncing: Fatal exception in interrupt Reported-by: Alexey Preobrazhensky <preobr@google.com> Reported-by: dormando <dormando@rydia.ne> Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 8141ed9fcedb2 ("ipv4: Add a socket release callback for datagram sockets") Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26ipip, sit: fix ipv4_{update_pmtu,redirect} callsDmitry Popov
[ Upstream commit 2346829e641b804ece9ac9298136b56d9567c278 ] ipv4_{update_pmtu,redirect} were called with tunnel's ifindex (t->dev is a tunnel netdevice). It caused wrong route lookup and failure of pmtu update or redirect. We should use the same ifindex that we use in ip_route_output_* in *tunnel_xmit code. It is t->parms.link . Signed-off-by: Dmitry Popov <ixaphire@qrator.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26tcp: fix cwnd undo on DSACK in F-RTOYuchung Cheng
[ Upstream commit 0cfa5c07d6d1d7f8e710fc671c5ba1ce85e09fa4 ] This bug is discovered by an recent F-RTO issue on tcpm list https://www.ietf.org/mail-archive/web/tcpm/current/msg08794.html The bug is that currently F-RTO does not use DSACK to undo cwnd in certain cases: upon receiving an ACK after the RTO retransmission in F-RTO, and the ACK has DSACK indicating the retransmission is spurious, the sender only calls tcp_try_undo_loss() if some never retransmisted data is sacked (FLAG_ORIG_DATA_SACKED). The correct behavior is to unconditionally call tcp_try_undo_loss so the DSACK information is used properly to undo the cwnd reduction. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-26net: tunnels - enable module autoloadingTom Gundersen
[ Upstream commit f98f89a0104454f35a62d681683c844f6dbf4043 ] Enable the module alias hookup to allow tunnel modules to be autoloaded on demand. This is in line with how most other netdev kinds work, and will allow userspace to create tunnels without having CAP_SYS_MODULE. Signed-off-by: Tom Gundersen <teg@jklm.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-16netfilter: ipv4: defrag: set local_df flag on defragmented skbFlorian Westphal
commit 895162b1101b3ea5db08ca6822ae9672717efec0 upstream. else we may fail to forward skb even if original fragments do fit outgoing link mtu: 1. remote sends 2k packets in two 1000 byte frags, DF set 2. we want to forward but only see '2k > mtu and DF set' 3. we then send icmp error saying that outgoing link is 1500 But original sender never sent a packet that would not fit the outgoing link. Setting local_df makes outgoing path test size vs. IPCB(skb)->frag_max_size, so we will still send the correct error in case the largest original size did not fit outgoing link mtu. Reported-by: Maxime Bizon <mbizon@freebox.fr> Suggested-by: Maxime Bizon <mbizon@freebox.fr> Fixes: 5f2d04f1f9 (ipv4: fix path MTU discovery with connection tracking) Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ipv4: initialise the itag variable in __mkroute_inputLi RongQing
[ Upstream commit fbdc0ad095c0a299e9abf5d8ac8f58374951149a ] the value of itag is a random value from stack, and may not be initiated by fib_validate_source, which called fib_combine_itag if CONFIG_IP_ROUTE_CLASSID is not set This will make the cached dst uncertainty Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ip_tunnel: Initialize the fallback device properlySteffen Klassert
[ Upstream commit 78ff4be45a4c51d8fb21ad92e4fabb467c6c3eeb ] We need to initialize the fallback device to have a correct mtu set on this device. Otherwise the mtu is set to null and the device is unusable. Fixes: fd58156e456d ("IPIP: Use ip-tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ipv4: fib_semantics: increment fib_info_cnt after fib_info allocationSergey Popovich
[ Upstream commit aeefa1ecfc799b0ea2c4979617f14cecd5cccbfd ] Increment fib_info_cnt in fib_create_info() right after successfuly alllocating fib_info structure, overwise fib_metrics allocation failure leads to fib_info_cnt incorrectly decremented in free_fib_info(), called on error path from fib_create_info(). Signed-off-by: Sergey Popovich <popovich_sergei@mail.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31net: ipv4: ip_forward: fix inverted local_df testFlorian Westphal
[ Upstream commit ca6c5d4ad216d5942ae544bbf02503041bd802aa ] local_df means 'ignore DF bit if set', so if its set we're allowed to perform ip fragmentation. This wasn't noticed earlier because the output path also drops such skbs (and emits needed icmp error) and because netfilter ip defrag did not set local_df until couple of days ago. Only difference is that DF-packets-larger-than MTU now discarded earlier (f.e. we avoid pointless netfilter postrouting trip). While at it, drop the repeated test ip_exceeds_mtu, checking it once is enough... Fixes: fe6cc55f3a9 ("net: ip, ipv6: handle gso skbs in forwarding path") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ipv4: ip_tunnels: disable cache for nbma gre tunnelsTimo Teräs
[ Upstream commit 22fb22eaebf4d16987f3fd9c3484c436ee0badf2 ] The connected check fails to check for ip_gre nbma mode tunnels properly. ip_gre creates temporary tnl_params with daddr specified to pass-in the actual target on per-packet basis from neighbor layer. Detect these tunnels by inspecting the actual tunnel configuration. Minimal test case: ip route add 192.168.1.1/32 via 10.0.0.1 ip route add 192.168.1.2/32 via 10.0.0.2 ip tunnel add nbma0 mode gre key 1 tos c0 ip addr add 172.17.0.0/16 dev nbma0 ip link set nbma0 up ip neigh add 172.17.0.1 lladdr 192.168.1.1 dev nbma0 ip neigh add 172.17.0.2 lladdr 192.168.1.2 dev nbma0 ping 172.17.0.1 ping 172.17.0.2 The second ping should be going to 192.168.1.2 and head 10.0.0.2; but cached gre tunnel level route is used and it's actually going to 192.168.1.1 via 10.0.0.1. The lladdr's need to go to separate dst for the bug to trigger. Test case uses separate route entries, but this can also happen when the route entry is same: if there is a nexthop exception or the GRE tunnel is IPsec'ed in which case the dst points to xfrm bundle unique to the gre lladdr. Fixes: 7d442fab0a67 ("ipv4: Cache dst in tunnels") Signed-off-by: Timo Teräs <timo.teras@iki.fi> Cc: Tom Herbert <therbert@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ip_tunnel: Set network header properly for IP_ECN_decapsulate()Ying Cai
[ Upstream commit e96f2e7c430014eff52c93cabef1ad4f42ed0db1 ] In ip_tunnel_rcv(), set skb->network_header to inner IP header before IP_ECN_decapsulate(). Without the fix, IP_ECN_decapsulate() takes outer IP header as inner IP header, possibly causing error messages or packet drops. Note that this skb_reset_network_header() call was in this spot when the original feature for checking consistency of ECN bits through tunnels was added in eccc1bb8d4b4 ("tunnel: drop packet if ECN present with not-ECT"). It was only removed from this spot in 3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module."). Fixes: 3d7b46cd20e3 ("ip_tunnel: push generic protocol handling to ip_tunnel module.") Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Ying Cai <ycai@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31tcp_cubic: fix the range of delayed_ackLiu Yu
[ Upstream commit 0cda345d1b2201dd15591b163e3c92bad5191745 ] commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent divide error) try to prevent divide error, but there is still a little chance that delayed_ack can reach zero. In case the param cnt get negative value, then ratio+cnt would overflow and may happen to be zero. As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero. In some old kernels, such as 2.6.32, there is a bug that would pass negative param, which then ultimately leads to this divide error. commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count with skb MSS) fixed the negative param issue. However, it's safe that we fix the range of delayed_ack as well, to make sure we do not hit a divide by zero. CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Liu Yu <allanyuliu@tencent.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31ipv4: return valid RTA_IIF on ip route getJulian Anastasov
[ Upstream commit 91146153da2feab18efab2e13b0945b6bb704ded ] Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37 ("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0 which is displayed as 'iif *'. inet_iif is not appropriate to use because skb_iif is not set. Use the skb->dev->ifindex instead. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31net: ipv4: current group_info should be put after using.Wang, Xiaoming
[ Upstream commit b04c46190219a4f845e46a459e3102137b7f6cac ] Plug a group_info refcount leak in ping_init. group_info is only needed during initialization and the code failed to release the reference on exit. While here move grabbing the reference to a place where it is actually needed. Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com> Signed-off-by: xiaoming wang <xiaoming.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31vti: don't allow to add the same tunnel twiceNicolas Dichtel
[ Upstream commit 8d89dcdf80d88007647945a753821a06eb6cc5a5 ] Before the patch, it was possible to add two times the same tunnel: ip l a vti1 type vti remote 10.16.0.121 local 10.16.0.249 key 41 ip l a vti2 type vti remote 10.16.0.121 local 10.16.0.249 key 41 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit b9959fd3b0fa ("vti: switch to new ip tunnel code"). CC: Cong Wang <amwang@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31gre: don't allow to add the same tunnel twiceNicolas Dichtel
[ Upstream commit 5a4552752d8f7f4cef1d98775ece7adb7616fde2 ] Before the patch, it was possible to add two times the same tunnel: ip l a gre1 type gre remote 10.16.0.121 local 10.16.0.249 ip l a gre2 type gre remote 10.16.0.121 local 10.16.0.249 It was possible, because ip_tunnel_newlink() calls ip_tunnel_find() with the argument dev->type, which was set only later (when calling ndo_init handler in register_netdevice()). Let's set this type in the setup handler, which is called before newlink handler. Introduced by commit c54419321455 ("GRE: Refactor GRE tunneling code."). CC: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31netfilter: Can't fail and free after table replacementThomas Graf
commit c58dd2dd443c26d856a168db108a0cd11c285bf3 upstream. All xtables variants suffer from the defect that the copy_to_user() to copy the counters to user memory may fail after the table has already been exchanged and thus exposed. Return an error at this point will result in freeing the already exposed table. Any subsequent packet processing will result in a kernel panic. We can't copy the counters before exposing the new tables as we want provide the counter state after the old table has been unhooked. Therefore convert this into a silent error. Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-28tcp: fix get_timewait4_sock() delay computation on 64bitEric Dumazet
It seems I missed one change in get_timewait4_sock() to compute the remaining time before deletion of IPV4 timewait socket. This could result in wrong output in /proc/net/tcp for tm->when field. Fixes: 96f817fedec4 ("tcp: shrink tcp6_timewait_sock by one cache line") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-05 09:41:46 +0000