summaryrefslogtreecommitdiff
path: root/net/ipv6/fib6_rules.c
AgeCommit message (Collapse)Author
2014-01-15ipv6: move IPV6_TCLASS_SHIFT into ipv6.h and define a helperLi RongQing
Two places defined IPV6_TCLASS_SHIFT, so we should move it into ipv6.h, and use this macro as possible. And define ip6_tclass helper to return tclass Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10inet: fix NULL pointer Oops in fib(6)_rule_suppressStefan Tomanek
This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11fib6_rules: fix indentationStefan Tomanek
This change just removes two tabs from the source file. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03fib_rules: fix suppressor names and default valuesStefan Tomanek
This change brings the suppressor attribute names into line; it also changes the data types to provide a more consistent interface. While -1 indicates that the suppressor is not enabled, values >= 0 for suppress_prefixlen or suppress_ifgroup reject routing decisions violating the constraint. This changes the previously presented behaviour of suppress_prefixlen, where a prefix length _less_ than the attribute value was rejected. After this change, a prefix length less than *or* equal to the value is considered a violation of the rule constraint. It also changes the default values for default and newly added rules (disabling any suppression for those). Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02fib_rules: add route suppression based on ifgroupStefan Tomanek
This change adds the ability to suppress a routing decision based upon the interface group the selected interface belongs to. This allows it to exclude specific devices from a routing decision. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: fib6_rules should return exact return valueHannes Frederic Sowa
With the addition of the suppress operation (7764a45a8f1fe74d4f7d301eaca2e558e7e2831a ("fib_rules: add .suppress operation") we rely on accurate error reporting of the fib_rules.actions. fib6_rule_action always returned -EAGAIN in case we could not find a matching route and 0 if a rule was matched. This also included a match for blackhole or prohibited rule actions which could get suppressed by the new logic. So adapt fib6_rule_action to always return the correct error code as its counterpart fib4_rule_action does. This also fixes a possiblity of nullptr-deref where we don't find a table, thus rt == NULL. Because the condition rt != ip6_null_entry still holdes it seems we could later get a nullptr bug on dereference rt->dst. v2: a) Fixed a brain fart in the commit msg (the rule => a table, etc). No changes to the patch. Cc: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31fib_rules: add .suppress operationStefan Tomanek
This change adds a new operation to the fib_rules_ops struct; it allows the suppression of routing decisions if certain criteria are not met by its results. The first implemented constraint is a minimum prefix length added to the structures of routing rules. If a rule is added with a minimum prefix length >0, only routes meeting this threshold will be considered. Any other (more general) routing table entries will be ignored. When configuring a system with multiple network uplinks and default routes, it is often convinient to reference the main routing table multiple times - but omitting the default route. Using this patch and a modified "ip" utility, this can be achieved by using the following command sequence: $ ip route add table secuplink default via 10.42.23.1 $ ip rule add pref 100 table main prefixlength 1 $ ip rule add pref 150 fwmark 0xA table secuplink With this setup, packets marked 0xA will be processed by the additional routing table "secuplink", but only if no suitable route in the main routing table can be found. By using a minimal prefixlength of 1, the default route (/0) of the table "main" is hidden to packets processed by rule 100; packets traveling to destinations with more specific routing entries are processed as usual. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ipv6: introduce ip6_rt_put()Amerigo Wang
As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06sections: fix section conflicts in netAndi Kleen
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02net/ipv6/fib6_rules.c: Checkpatch cleanupEldad Zack
fib6_rules.c:26: ERROR: open brace '{' following struct go on the same line Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02ipv6: Stop using NLA_PUT*().David S. Miller
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib6: use FIB_LOOKUP_NOREF in fib6_rule_lookup()Eric Dumazet
Avoid two atomic ops on found rule in fib6_rule_lookup() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net-next: remove useless union keywordChangli Gao
remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26net: rtnetlink: decouple rtnetlink address families from real address familiesPatrick McHardy
Decouple rtnetlink address families from real address families in socket.h to be able to add rtnetlink interfaces to code that is not a real address family without increasing AF_MAX/NPROTO. This will be used to add support for multicast route dumping from all tables as the proc interface can't be extended to support anything but the main table without breaking compatibility. This partialy undoes the patch to introduce independant families for routing rules and converts ipmr routing rules to a new rtnetlink family. Similar to that patch, values up to 127 are reserved for real address families, values above that may be used arbitrarily. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26net: fib_rules: mark arguments to fib_rules_register const and __net_initdataPatrick McHardy
fib_rules_register() duplicates the template passed to it without modification, mark the argument as const. Additionally the templates are only needed when instantiating a new namespace, so mark them as __net_initdata, which means they can be discarded when CONFIG_NET_NS=n. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-13net: fib_rules: decouple address families from real address familiesPatrick McHardy
Decouple the address family values used for fib_rules from the real address families in socket.h. This allows to use fib_rules for code that is not a real address family without increasing AF_MAX/NPROTO. Values up to 127 are reserved for real address families and map directly to the corresponding AF value, values starting from 128 are for other uses. rtnetlink is changed to invoke the AF_UNSPEC dumpit/doit handlers for these families. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13net: fib_rules: set family in fib_rule_hdr centrallyPatrick McHardy
All fib_rules implementations need to set the family in their ->fill() functions. Since the value is available to the generic fib_nl_fill_rule() function, set it there. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx.YOSHIFUJI Hideaki / 吉藤英明
IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-17net: spread __net_init, __net_exitAlexey Dobriyan
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03net: Allow fib_rule_unregister to batchEric W. Biederman
Refactor the code so fib_rules_register always takes a template instead of the actual fib_rules_ops structure that will be used. This is required for network namespace support so 2 out of the 3 callers already do this, it allows the error handling to be made common, and it allows fib_rules_unregister to free the template for hte caller. Modify fib_rules_unregister to use call_rcu instead of syncrhonize_rcu to allw multiple namespaces to be cleaned up in the same rcu grace period. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03net 04/05: fib_rules: allow to delete local rulePatrick McHardy
commit d124356ce314fff22a047ea334379d5105b2d834 Author: Patrick McHardy <kaber@trash.net> Date: Thu Dec 3 12:16:35 2009 +0100 net: fib_rules: allow to delete local rule Allow to delete the local rule and recreate it with a higher priority. This can be used to force packets with a local destination out on the wire instead of routing them to loopback. Additionally this patch allows to recreate rules with a priority of 0. Combined with the previous patch to allow oif classification, a socket can be bound to the desired interface and packets routed to the wire like this: # move local rule to lower priority ip rule add pref 1000 lookup local ip rule del pref 0 # route packets of sockets bound to eth0 to the wire independant # of the destination address ip rule add pref 100 oif eth0 lookup 100 ip route add default dev eth0 table 100 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-20net: Remove unused parameter from fill method in fib_rules_ops.Rami Rosen
The netlink message header (struct nlmsghdr) is an unused parameter in fill method of fib_rules_ops struct. This patch removes this parameter from this method and fixes the places where this method is called. (include/net/fib_rules.h) Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17ipv4: remove an unused parameter from configure method of fib_rules_ops.Rami Rosen
Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-14netns: Add network namespace argument to rt6_fill_node() and ↵Brian Haley
ipv6_dev_get_saddr() ipv6_dev_get_saddr() blindly de-references dst_dev to get the network namespace, but some callers might pass NULL. Change callers to pass a namespace pointer instead. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-11[IPV6] FIB_RULE: Sparse: fib6_rules_cleanup() is of void.YOSHIFUJI Hideaki
| net/ipv6/fib6_rules.c:319:2: warning: returning void-valued expression Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-26[NET] NETNS: Omit sock->sk_net without CONFIG_NET_NS.YOSHIFUJI Hideaki
Introduce per-sock inlines: sock_net(), sock_net_set() and per-inet_timewait_sock inlines: twsk_net(), twsk_net_set(). Without CONFIG_NET_NS, no namespace other than &init_net exists. Let's explicitly define them to help compiler optimizations. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25[IPV6]: Support Source Address Selection API (RFC5014).YOSHIFUJI Hideaki
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-04[NETNS][IPV6] rt6_info - move rt6_info structure inside the namespaceDaniel Lezcano
The rt6_info structures are moved inside the network namespace structure. All references to these structures are now relative to the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[NETNS][IPV6] rt6_info - make rt6_info accessed as a pointerDaniel Lezcano
This patch make mindless changes and prepares the code to use dynamic allocation for rt6_info structure. The code accesses the rt6_info structure as a pointer instead of a global static variable. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] fib6_rules - handle several network namespacesDaniel Lezcano
The fib6_rules_ops is moved to the network namespace structure. All references are changed to have it relatively to it. Each time a network namespace is created a new fib6_rules_ops is allocated, initialized and stored into the network namespace structure. The common part of the fib rules is namespace aware, so it is quite easy to retrieve the network namespace from the rules and use it in the different callbacks. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] fib6 rule - dynamic allocation of the rules struct opsDaniel Lezcano
The fib6_rules_ops structure is dynamically allocated, so that allows to make several instances of it per network namespace. The global static fib6_rules_ops structure is renamed to fib6_rules_ops_template in order to quickly memcopy it for the structure initialization. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-03[NETNS][IPV6] ip6_fib - make it per network namespaceDaniel Lezcano
The fib table for ipv6 are moved to the network namespace structure. All references to them are made relatively to the network namespace. All external calls to the ip6_fib functions taking the network namespace parameter are made using the init_net variable, so the ip6_fib engine is ready for the namespaces but the callers not yet. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-04[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().YOSHIFUJI Hideaki
Since most users of ipv6_get_saddr() pass non-NULL as dst argument, use ipv6_dev_get_saddr() directly. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-01-28[NETNS]: FIB rules API cleanup.Denis V. Lunev
Remove struct net from fib_rules_register(unregister)/notify_change paths and diet code size a bit. add/remove: 0/0 grow/shrink: 10/12 up/down: 35/-100 (-65) function old new delta notify_rule_change 273 280 +7 trie_show_stats 471 475 +4 fn_trie_delete 473 477 +4 fib_rules_unregister 144 148 +4 fib4_rule_compare 119 123 +4 resize 2842 2845 +3 fn_trie_select_default 515 518 +3 inet_sk_rebuild_header 836 838 +2 fib_trie_seq_show 764 766 +2 __devinet_sysctl_register 276 278 +2 fn_trie_lookup 1124 1123 -1 ip_fib_check_default 133 131 -2 devinet_conf_sysctl 223 221 -2 snmp_fold_field 126 123 -3 fn_trie_insert 2091 2086 -5 inet_create 876 870 -6 fib4_rules_init 197 191 -6 fib_sync_down 452 444 -8 inet_gso_send_check 334 325 -9 fib_create_info 3003 2991 -12 fib_nl_delrule 568 553 -15 fib_nl_newrule 883 852 -31 Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[FIB]: Add netns to fib_rules_ops.Denis V. Lunev
The backward link from FIB rules operations to the network namespace will allow to simplify the API a bit. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Pass fib_rules_ops into default_pref method.Denis V. Lunev
fib_rules_ops contains operations and the list of configured rules. ops will become per/namespace soon, so we need them to be known in the default_pref callback. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to fib_rules_(un)register.Denis V. Lunev
The patch extends the different fib rules API in order to pass the network namespace pointer. That will allow to access the different tables from a namespace relative object. As usual, the pointer to the init_net variable is passed as parameter so we don't break the network. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[IPV6]: Make fib6_rules_init to return an error code.Daniel Lezcano
When the fib_rules initialization finished, no return code is provided so there is no way to know, for the caller, if the initialization has been successful or has failed. This patch fix that. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Acked-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-10[INET]: Small possible memory leak in FIB rulesDenis V. Lunev
This patch fixes a small memory leak. Default fib rules can be deleted by the user if the rule does not carry FIB_RULE_PERMANENT flag, f.e. by ip rule flush Such a rule will not be freed as the ref-counter has 2 on start and becomes clearly unreachable after removal. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10[IPV4/IPV6/DECNET]: Small cleanup for fib rules.Denis V. Lunev
This patch slightly cleanups FIB rules framework. rules_list as a pointer on struct fib_rules_ops is useless. It is always assigned with a static per/subsystem list in IPv4, IPv6 and DecNet. Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-07[NETLINK]: Mark netlink policies constPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPV6] FIB6RULE: Find source address during looking up route.YOSHIFUJI Hideaki
When looking up route for destination with rules with source address restrictions, we may need to find a source address for the traffic if not given. Based on patch from Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[NET] rules: Unified rules dumpingThomas Graf
Implements a unified, protocol independant rules dumping function which is capable of both, dumping a specific protocol family or all of them. This speeds up dumping as less lookups are required. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25[IPv6]: Use rtnl registration interfaceThomas Graf
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: Fix fib_rules compatibility breakageThomas Graf
Based upon a patch from Patrick McHardy. The fib_rules netlink attribute policy introduced in 2.6.19 broke userspace compatibilty. When specifying a rule with "from all" or "to all", iproute adds a zero byte long netlink attribute, but the policy requires all addresses to have a size equal to sizeof(struct in_addr)/sizeof(struct in6_addr), resulting in a validation error. Check attribute length of FRA_SRC/FRA_DST in the generic framework by letting the family specific rules implementation provide the length of an address. Report an error if address length is non zero but no address attribute is provided. Fix actual bug by checking address length for non-zero instead of relying on availability of attribute. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[IPv6] rules: Remove bogus tos validation checkThomas Graf
Noticed by Al Viro: (frh->tos & ~IPV6_FLOWINFO_MASK)) where IPV6_FLOWINFO_MASK is htonl(0xfffffff) and frh->tos is u8, which makes no sense here... Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-02[NETLINK]: Do precise netlink message allocations where possibleThomas Graf
Account for the netlink message header size directly in nlmsg_new() instead of relying on the caller calculate it correctly. Replaces error handling of message construction functions when constructing notifications with bug traps since a failure implies a bug in calculating the size of the skb. Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>