summaryrefslogtreecommitdiff
path: root/net/ipv6
AgeCommit message (Collapse)Author
2018-09-05vti6: fix PMTU caching and reporting on xmitEyal Birger
[ Upstream commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ] When setting the skb->dst before doing the MTU check, the route PMTU caching and reporting is done on the new dst which is about to be released. Instead, PMTU handling should be done using the original dst. This is aligned with IPv4 VTI. Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24netfilter: x_tables: set module owner for icmp(6) matchesFlorian Westphal
[ Upstream commit d376bef9c29b3c65aeee4e785fffcd97ef0a9a81 ] nft_compat relies on xt_request_find_match to increment refcount of the module that provides the match/target. The (builtin) icmp matches did't set the module owner so it was possible to rmmod ip(6)tables while icmp extensions were still in use. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24ipv6: mcast: fix unsolicited report interval after receiving querysHangbin Liu
[ Upstream commit 6c6da92808442908287fae8ebb0ca041a52469f4 ] After recieving MLD querys, we update idev->mc_maxdelay with max_delay from query header. This make the later unsolicited reports have the same interval with mc_maxdelay, which means we may send unsolicited reports with long interval time instead of default configured interval time. Also as we will not call ipv6_mc_reset() after device up. This issue will be there even after leave the group and join other groups. Fixes: fc4eba58b4c14 ("ipv6: make unsolicited report intervals configurable for mld") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-24netfilter: ipv6: nf_defrag: reduce struct net memory wasteEric Dumazet
[ Upstream commit 9ce7bc036ae4cfe3393232c86e9e1fea2153c237 ] It is a waste of memory to use a full "struct netns_sysctl_ipv6" while only one pointer is really used, considering netns_sysctl_ipv6 keeps growing. Also, since "struct netns_frags" has cache line alignment, it is better to move the frags_hdr pointer outside, otherwise we spend a full cache line for this pointer. This saves 192 bytes of memory per netns. Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15ipv4+ipv6: Make INET*_ESP select CRYPTO_ECHAINIVThomas Egerer
commit 32b6170ca59ccf07d0e394561e54b2cd9726038c upstream. The ESP algorithms using CBC mode require echainiv. Hence INET*_ESP have to select CRYPTO_ECHAINIV in order to work properly. This solves the issues caused by a misconfiguration as described in [1]. The original approach, patching crypto/Kconfig was turned down by Herbert Xu [2]. [1] https://lists.strongswan.org/pipermail/users/2015-December/009074.html [2] http://marc.info/?l=linux-crypto-vger&m=145224655809562&w=2 Signed-off-by: Thomas Egerer <hakke_007@gmx.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-28ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pullWillem de Bruijn
[ Upstream commit 2efd4fca703a6707cad16ab486eaab8fc7f0fd49 ] Syzbot reported a read beyond the end of the skb head when returning IPV6_ORIGDSTADDR: BUG: KMSAN: kernel-infoleak in put_cmsg+0x5ef/0x860 net/core/scm.c:242 CPU: 0 PID: 4501 Comm: syz-executor128 Not tainted 4.17.0+ #9 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1125 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1219 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1261 copy_to_user include/linux/uaccess.h:184 [inline] put_cmsg+0x5ef/0x860 net/core/scm.c:242 ip6_datagram_recv_specific_ctl+0x1cf3/0x1eb0 net/ipv6/datagram.c:719 ip6_datagram_recv_ctl+0x41c/0x450 net/ipv6/datagram.c:733 rawv6_recvmsg+0x10fb/0x1460 net/ipv6/raw.c:521 [..] This logic and its ipv4 counterpart read the destination port from the packet at skb_transport_offset(skb) + 4. With MSG_MORE and a local SOCK_RAW sender, syzbot was able to cook a packet that stores headers exactly up to skb_transport_offset(skb) in the head and the remainder in a frag. Call pskb_may_pull before accessing the pointer to ensure that it lies in skb head. Link: http://lkml.kernel.org/r/CAF=yD-LEJwZj5a1-bAAj2Oy_hKmGygV6rsJ_WOrAYnv-fnayiQ@mail.gmail.com Reported-by: syzbot+9adb4b567003cac781f0@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-28ip: hash fragments consistentlyPaolo Abeni
[ Upstream commit 3dd1c9a1270736029ffca670e9bd0265f4120600 ] The skb hash for locally generated ip[v6] fragments belonging to the same datagram can vary in several circumstances: * for connected UDP[v6] sockets, the first fragment get its hash via set_owner_w()/skb_set_hash_from_sk() * for unconnected IPv6 UDPv6 sockets, the first fragment can get its hash via ip6_make_flowlabel()/skb_get_hash_flowi6(), if auto_flowlabel is enabled For the following frags the hash is usually computed via skb_get_hash(). The above can cause OoO for unconnected IPv6 UDPv6 socket: in that scenario the egress tx queue can be selected on a per packet basis via the skb hash. It may also fool flow-oriented schedulers to place fragments belonging to the same datagram in different flows. Fix the issue by copying the skb hash from the head frag into the others at fragmentation time. Before this commit: perf probe -a "dev_queue_xmit skb skb->hash skb->l4_hash:b1@0/8 skb->sw_hash:b1@1/8" netperf -H $IPV4 -t UDP_STREAM -l 5 -- -m 2000 -n & perf record -e probe:dev_queue_xmit -e probe:skb_set_owner_w -a sleep 0.1 perf script probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=3713014309 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=0 l4_hash=0 sw_hash=0 After this commit: probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 probe:dev_queue_xmit: (ffffffff8c6b1b20) hash=2171763177 l4_hash=1 sw_hash=0 Fixes: b73c3d0e4f0e ("net: Save TX flow hash in sock and set in skbuf on xmit") Fixes: 67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22Revert "sit: reload iphdr in ipip6_rcv"David S. Miller
commit f4eb17e1efe538d4da7d574bedb00a8dafcc26b7 upstream. This reverts commit b699d0035836f6712917a41e7ae58d84359b8ff9. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Dmitry Tunin <hanipouspilot@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-17netfilter: x_tables: initialise match/target check parameter structFlorian Westphal
commit c568503ef02030f169c9e19204def610a3510918 upstream. syzbot reports following splat: BUG: KMSAN: uninit-value in ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 ebt_stp_mt_check+0x24b/0x450 net/bridge/netfilter/ebt_stp.c:162 xt_check_match+0x1438/0x1650 net/netfilter/x_tables.c:506 ebt_check_match net/bridge/netfilter/ebtables.c:372 [inline] ebt_check_entry net/bridge/netfilter/ebtables.c:702 [inline] The uninitialised access is xt_mtchk_param->nft_compat ... which should be set to 0. Fix it by zeroing the struct beforehand, same for tgchk. ip(6)tables targetinfo uses c99-style initialiser, so no change needed there. Reported-by: syzbot+da4494182233c23a5fcf@syzkaller.appspotmail.com Fixes: 55917a21d0cc0 ("netfilter: x_tables: add context to know if extension runs from nft_compat") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03tcp: verify the checksum of the first data segment in a new connectionFrank van der Linden
[ Upstream commit 4fd44a98ffe0d048246efef67ed640fdf2098a62 ] commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") introduced an optimization for the handling of child sockets created for a new TCP connection. But this optimization passes any data associated with the last ACK of the connection handshake up the stack without verifying its checksum, because it calls tcp_child_process(), which in turn calls tcp_rcv_state_process() directly. These lower-level processing functions do not do any checksum verification. Insert a tcp_checksum_complete call in the TCP_NEW_SYN_RECEIVE path to fix this. Fixes: 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03xfrm6: avoid potential infinite loop in _decode_session6()Eric Dumazet
[ Upstream commit d9f92772e8ec388d070752ee8f187ef8fa18621f ] syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reported-by: syzbot+0053c8...@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeedsSabrina Dubroca
[ Upstream commit 848235edb5c93ed086700584c8ff64f6d7fc778d ] Currently, raw6_sk(sk)->ip6mr_table is set unconditionally during ip6_mroute_setsockopt(MRT6_TABLE). A subsequent attempt at the same setsockopt will fail with -ENOENT, since we haven't actually created that table. A similar fix for ipv4 was included in commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups"). Fixes: d1db275dd3f6 ("ipv6: ip6mr: support multiple tables") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-30sit: fix IFLA_MTU ignored on NEWLINKXin Long
[ Upstream commit 2b3957c34b6d7f03544b12ebbf875eee430745db ] Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-26net: test tailroom before appending to linear skbWillem de Bruijn
[ Upstream commit 113f99c3358564a0647d444c2ae34e8b1abfd5b9 ] Device features may change during transmission. In particular with corking, a device may toggle scatter-gather in between allocating and writing to an skb. Do not unconditionally assume that !NETIF_F_SG at write time implies that the same held at alloc time and thus the skb has sufficient tailroom. This issue predates git history. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policyEric Dumazet
[ Upstream commit aa8f8778493c85fff480cdf8b349b1e1dcb5f243 ] KMSAN reported use of uninit-value that I tracked to lack of proper size check on RTA_TABLE attribute. I also believe RTA_PREFSRC lacks a similar check. Fixes: 86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config") Fixes: c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ipv6: the entire IPv6 header chain must fit the first fragmentPaolo Abeni
[ Upstream commit 10b8a3de603df7b96004179b1b33b1708c76d144 ] While building ipv6 datagram we currently allow arbitrary large extheaders, even beyond pmtu size. The syzbot has found a way to exploit the above to trigger the following splat: kernel BUG at ./include/linux/skbuff.h:2073! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 4230 Comm: syzkaller672661 Not tainted 4.16.0-rc2+ #326 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__skb_pull include/linux/skbuff.h:2073 [inline] RIP: 0010:__ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: 0018:ffff8801bc18f0f0 EFLAGS: 00010293 RAX: ffff8801b17400c0 RBX: 0000000000000738 RCX: ffffffff84f01828 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8801b415ac18 RBP: ffff8801bc18f360 R08: ffff8801b4576844 R09: 0000000000000000 R10: ffff8801bc18f380 R11: ffffed00367aee4e R12: 00000000000000d6 R13: ffff8801b415a740 R14: dffffc0000000000 R15: ffff8801b45767c0 FS: 0000000001535880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000b000 CR3: 00000001b4123001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:969 [inline] udp_v6_push_pending_frames+0x269/0x3b0 net/ipv6/udp.c:1073 udpv6_sendmsg+0x2a96/0x3400 net/ipv6/udp.c:1343 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 ___sys_sendmsg+0x320/0x8b0 net/socket.c:2046 __sys_sendmmsg+0x1ee/0x620 net/socket.c:2136 SYSC_sendmmsg net/socket.c:2167 [inline] SyS_sendmmsg+0x35/0x60 net/socket.c:2162 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4404c9 RSP: 002b:00007ffdce35f948 EFLAGS: 00000217 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004404c9 RDX: 0000000000000003 RSI: 0000000020001f00 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000020000080 R11: 0000000000000217 R12: 0000000000401df0 R13: 0000000000401e80 R14: 0000000000000000 R15: 0000000000000000 Code: ff e8 1d 5e b9 fc e9 15 e9 ff ff e8 13 5e b9 fc e9 44 e8 ff ff e8 29 5e b9 fc e9 c0 e6 ff ff e8 3f f3 80 fc 0f 0b e8 38 f3 80 fc <0f> 0b 49 8d 87 80 00 00 00 4d 8d 87 84 00 00 00 48 89 85 20 fe RIP: __skb_pull include/linux/skbuff.h:2073 [inline] RSP: ffff8801bc18f0f0 RIP: __ip6_make_skb+0x1ac8/0x2190 net/ipv6/ip6_output.c:1636 RSP: ffff8801bc18f0f0 As stated by RFC 7112 section 5: When a host fragments an IPv6 datagram, it MUST include the entire IPv6 Header Chain in the First Fragment. So this patch addresses the issue dropping datagrams with excessive extheader length. It also updates the error path to report to the calling socket nonnegative pmtu values. The issue apparently predates git history. v1 -> v2: cleanup error path, as per Eric's suggestion Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+91e6f9932ff122fa4410@syzkaller.appspotmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/ipv6: Increment OUTxxx counters after netfilter hookJeff Barnhill
[ Upstream commit 71a1c915238c970cd9bdd5bf158b1279d6b6d55b ] At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13vti6: better validate user provided tunnel namesEric Dumazet
[ Upstream commit 537b361fbcbcc3cd6fe2bb47069fd292b9256d16 ] Use valid_name() to make sure user does not provide illegal device name. Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ip6_tunnel: better validate user provided tunnel namesEric Dumazet
[ Upstream commit db7a65e3ab78e5b1c4b17c0870ebee35a4ee3257 ] Use valid_name() to make sure user does not provide illegal device name. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ip6_gre: better validate user provided tunnel namesEric Dumazet
[ Upstream commit 5f42df013b8bc1b6511af7a04bf93b014884ae2a ] Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339 Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466 CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339 ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ipv6: sit: better validate user provided tunnel namesEric Dumazet
[ Upstream commit b95211e066fc3494b7c115060b2297b4ba21f025 ] Use dev_valid_name() to make sure user does not provide illegal device name. syzbot caught the following bug : BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453 CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x1b9/0x29f lib/dump_stack.c:53 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254 ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221 dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334 dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525 sock_ioctl+0x47e/0x680 net/socket.c:1015 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 SYSC_ioctl fs/ioctl.c:708 [inline] SyS_ioctl+0x24/0x30 fs/ioctl.c:706 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13net/ipv6: Fix route leaking between VRFsDavid Ahern
[ Upstream commit b6cdbc85234b072340b8923e69f49ec293f905dc ] Donald reported that IPv6 route leaking between VRFs is not working. The root cause is the strict argument in the call to rt6_lookup when validating the nexthop spec. ip6_route_check_nh validates the gateway and device (if given) of a route spec. It in turn could call rt6_lookup (e.g., lookup in a given table did not succeed so it falls back to a full lookup) and if so sets the strict argument to 1. That means if the egress device is given, the route lookup needs to return a result with the same device. This strict requirement does not work with VRFs (IPv4 or IPv6) because the oif in the flow struct is overridden with the index of the VRF device to trigger a match on the l3mdev rule and force the lookup to its table. The right long term solution is to add an l3mdev index to the flow struct such that the oif is not overridden. That solution will not backport well, so this patch aims for a simpler solution to relax the strict argument if the route spec device is an l3mdev slave. As done in other places, use the FLOWI_FLAG_SKIP_NH_OIF to know that the RT6_LOOKUP_F_IFACE flag needs to be removed. Fixes: ca254490c8df ("net: Add VRF support to IPv6 stack") Reported-by: Donald Sharp <sharpd@cumulusnetworks.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ipsec: check return value of skb_to_sgvec alwaysJason A. Donenfeld
commit 3f29770723fe498a5c5f57c3a31a996ebdde03e1 upstream. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> [natechancellor: Adjusted context due to lack of fca11ebde3f0] Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13sit: reload iphdr in ipip6_rcvHaishuang Yan
[ Upstream commit b699d0035836f6712917a41e7ae58d84359b8ff9 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13ipv6: avoid dad-failures for addresses with NODADMahesh Bandewar
[ Upstream commit 66eb9f86e50547ec2a8ff7a75997066a74ef584b ] Every address gets added with TENTATIVE flag even for the addresses with IFA_F_NODAD flag and dad-work is scheduled for them. During this DAD process we realize it's an address with NODAD and complete the process without sending any probe. However the TENTATIVE flags stays on the address for sometime enough to cause misinterpretation when we receive a NS. While processing NS, if the address has TENTATIVE flag, we mark it DADFAILED and endup with an address that was originally configured as NODAD with DADFAILED. We can't avoid scheduling dad_work for addresses with NODAD but we can avoid adding TENTATIVE flag to avoid this racy situation. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08Revert "ip6_vti: adjust vti mtu according to mtu of lower device"Greg Kroah-Hartman
This reverts commit 2fe832c678189d6b19b5ff282e7e70df79c1406b which is commit 53c81e95df1793933f87748d36070a721f6cb287 upstream. Ben writes that there are a number of follow-on patches needed to fix this up, but they get complex to backport, and some custom fixes are needed, so let's just revert this and wait for a "real" set of patches to resolve this to be submitted if it is really needed. Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Petr Vorel <pvorel@suse.cz> Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-31ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()Lorenzo Bianconi
[ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ] Fix the following slab-out-of-bounds kasan report in ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not linear and the accessed data are not in the linear data region of orig_skb. [ 1503.122508] ================================================================== [ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990 [ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932 [ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124 [ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 [ 1503.123527] Call Trace: [ 1503.123579] <IRQ> [ 1503.123638] print_address_description+0x6e/0x280 [ 1503.123849] kasan_report+0x233/0x350 [ 1503.123946] memcpy+0x1f/0x50 [ 1503.124037] ndisc_send_redirect+0x94e/0x990 [ 1503.125150] ip6_forward+0x1242/0x13b0 [...] [ 1503.153890] Allocated by task 1932: [ 1503.153982] kasan_kmalloc+0x9f/0xd0 [ 1503.154074] __kmalloc_track_caller+0xb5/0x160 [ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70 [ 1503.154324] __alloc_skb+0x130/0x3e0 [ 1503.154415] sctp_packet_transmit+0x21a/0x1810 [ 1503.154533] sctp_outq_flush+0xc14/0x1db0 [ 1503.154624] sctp_do_sm+0x34e/0x2740 [ 1503.154715] sctp_primitive_SEND+0x57/0x70 [ 1503.154807] sctp_sendmsg+0xaa6/0x1b10 [ 1503.154897] sock_sendmsg+0x68/0x80 [ 1503.154987] ___sys_sendmsg+0x431/0x4b0 [ 1503.155078] __sys_sendmsg+0xa4/0x130 [ 1503.155168] do_syscall_64+0x171/0x3f0 [ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.155436] Freed by task 1932: [ 1503.155527] __kasan_slab_free+0x134/0x180 [ 1503.155618] kfree+0xbc/0x180 [ 1503.155709] skb_release_data+0x27f/0x2c0 [ 1503.155800] consume_skb+0x94/0xe0 [ 1503.155889] sctp_chunk_put+0x1aa/0x1f0 [ 1503.155979] sctp_inq_pop+0x2f8/0x6e0 [ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230 [ 1503.156164] sctp_inq_push+0x117/0x150 [ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0 [ 1503.156346] __release_sock+0x142/0x250 [ 1503.156436] release_sock+0x80/0x180 [ 1503.156526] sctp_sendmsg+0xbb0/0x1b10 [ 1503.156617] sock_sendmsg+0x68/0x80 [ 1503.156708] ___sys_sendmsg+0x431/0x4b0 [ 1503.156799] __sys_sendmsg+0xa4/0x130 [ 1503.156889] do_syscall_64+0x171/0x3f0 [ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.157158] The buggy address belongs to the object at ffff8800298ab600 which belongs to the cache kmalloc-1024 of size 1024 [ 1503.157444] The buggy address is located 176 bytes inside of 1024-byte region [ffff8800298ab600, ffff8800298aba00) [ 1503.157702] The buggy address belongs to the page: [ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 1503.158053] flags: 0x4000000000008100(slab|head) [ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e [ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000 [ 1503.158523] page dumped because: kasan: bad access detected [ 1503.158698] Memory state around the buggy address: [ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1503.159338] ^ [ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159785] ================================================================== [ 1503.159964] Disabling lock debugging due to kernel taint The test scenario to trigger the issue consists of 4 devices: - H0: data sender, connected to LAN0 - H1: data receiver, connected to LAN1 - GW0 and GW1: routers between LAN0 and LAN1. Both of them have an ethernet connection on LAN0 and LAN1 On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for data from LAN0 to LAN1. Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send buffer size is set to 16K). While data streams are active flush the route cache on HA multiple times. I have not been able to identify a given commit that introduced the issue since, using the reproducer described above, the kasan report has been triggered from 4.14 and I have not gone back further. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24ip6_vti: adjust vti mtu according to mtu of lower deviceAlexey Kodanev
[ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24net: ipv6: send unsolicited NA on admin upDavid Ahern
[ Upstream commit 4a6e3c5def13c91adf2acc613837001f09af3baa ] ndisc_notify is the ipv6 equivalent to arp_notify. When arp_notify is set to 1, gratuitous arp requests are sent when the device is brought up. The same is expected when ndisc_notify is set to 1 (per ndisc_notify in Documentation/networking/ip-sysctl.txt). The NA is not sent on NETDEV_UP event; add it. Fixes: 5cb04436eef6 ("ipv6: add knob to send unsolicited ND on link-layer address change") Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pack percpu counter allocationsFlorian Westphal
commit ae0ac0ed6fcf5af3be0f63eb935f483f44a402d2 upstream. instead of allocating each xt_counter individually, allocate 4k chunks and then use these for counter allocation requests. This should speed up rule evaluation by increasing data locality, also speeds up ruleset loading because we reduce calls to the percpu allocator. As Eric points out we can't use PAGE_SIZE, page_allocator would fail on arches with 64k page size. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pass xt_counters struct to counter allocatorFlorian Westphal
commit f28e15bacedd444608e25421c72eb2cf4527c9ca upstream. Keeps some noise away from a followup patch. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: x_tables: pass xt_counters struct instead of packet counterFlorian Westphal
commit 4d31eef5176df06f218201bc9c0ce40babb41660 upstream. On SMP we overload the packet counter (unsigned long) to contain percpu offset. Hide this from callers and pass xt_counters address instead. Preparation patch to allocate the percpu counters in page-sized batch chunks. Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: ipv6: fix use-after-free Write in nf_nat_ipv6_manip_pktFlorian Westphal
commit b078556aecd791b0e5cb3a59f4c3a14273b52121 upstream. l4proto->manip_pkt() can cause reallocation of skb head so pointer to the ipv6 header must be reloaded. Reported-and-tested-by: <syzbot+10005f4292fc9cc89de7@syzkaller.appspotmail.com> Fixes: 58a317f1061c89 ("netfilter: ipv6: add IPv6 NAT support") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18netfilter: add back stackpointer size checksFlorian Westphal
commit 57ebd808a97d7c5b1e1afb937c2db22beba3c1f8 upstream. The rationale for removing the check is only correct for rulesets generated by ip(6)tables. In iptables, a jump can only occur to a user-defined chain, i.e. because we size the stack based on number of user-defined chains we cannot exceed stack size. However, the underlying binary format has no such restriction, and the validation step only ensures that the jump target is a valid rule start point. IOW, its possible to build a rule blob that has no user-defined chains but does contain a jump. If this happens, no jump stack gets allocated and crash occurs because no jumpstack was allocated. Fixes: 7814b6ec6d0d6 ("netfilter: xtables: don't save/restore jumpstack offset") Reported-by: syzbot+e783f671527912cd9403@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11udplite: fix partial checksum initializationAlexey Kodanev
[ Upstream commit 15f35d49c93f4fa9875235e7bf3e3783d2dd7a1b ] Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann
[ Upstream commit ca79bec237f5809a7c3c59bd41cd0880aa889966 ] gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-03ipv6: icmp6: Allow icmp messages to be looped backBrendan McGrath
[ Upstream commit 588753f1eb18978512b1c9b85fddb457d46f9033 ] One example of when an ICMPv6 packet is required to be looped back is when a host acts as both a Multicast Listener and a Multicast Router. A Multicast Router will listen on address ff02::16 for MLDv2 messages. Currently, MLDv2 messages originating from a Multicast Listener running on the same host as the Multicast Router are not being delivered to the Multicast Router. This is due to dst.input being assigned the default value of dst_discard. This results in the packet being looped back but discarded before being delivered to the Multicast Router. This patch sets dst.input to ip6_input to ensure a looped back packet is delivered to the Multicast Router. Signed-off-by: Brendan McGrath <redmcg@redmandi.dyndns.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28ip_tunnel: replace dst_cache with generic implementationPaolo Abeni
commit e09acddf873bf775b208b452a4c3a3fd26fa9427 upstream. The current ip_tunnel cache implementation is prone to a race that will cause the wrong dst to be cached on cuncurrent dst cache miss and ip tunnel update via netlink. Replacing with the generic implementation fix the issue. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28netfilter: drop outermost socket lock in getsockopt()Paolo Abeni
commit 01ea306f2ac2baff98d472da719193e738759d93 upstream. The Syzbot reported a possible deadlock in the netfilter area caused by rtnl lock, xt lock and socket lock being acquired with a different order on different code paths, leading to the following backtrace: Reviewed-by: Xin Long <lucien.xin@gmail.com> ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #301 Not tainted ------------------------------------------------------ syzkaller233489/4179 is trying to acquire lock: (rtnl_mutex){+.+.}, at: [<0000000048e996fd>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 but task is already holding lock: (&xt[i].mutex){+.+.}, at: [<00000000328553a2>] xt_find_table_lock+0x3e/0x3e0 net/netfilter/x_tables.c:1041 which lock already depends on the new lock. === Since commit 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope"), we already acquire the socket lock in the innermost scope, where needed. In such commit I forgot to remove the outer-most socket lock from the getsockopt() path, this commit addresses the issues dropping it now. v1 -> v2: fix bad subj, added relavant 'fixes' tag Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Fixes: 202f59afd441 ("netfilter: ipt_CLUSTERIP: do not hold dev") Fixes: 3f34cfae1230 ("netfilter: on sockopt() acquire sock lock only in the required scope") Reported-by: syzbot+ddde1c7b7ff7442d7f2d@syzkaller.appspotmail.com Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25netfilter: on sockopt() acquire sock lock only in the required scopePaolo Abeni
commit 3f34cfae1238848fd53f25e5c8fd59da57901f4b upstream. Syzbot reported several deadlocks in the netfilter area caused by rtnl lock and socket lock being acquired with a different order on different code paths, leading to backtraces like the following one: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc9+ #212 Not tainted ------------------------------------------------------ syzkaller041579/3682 is trying to acquire lock: (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] lock_sock include/net/sock.h:1463 [inline] (sk_lock-AF_INET6){+.+.}, at: [<000000008775e4dd>] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 but task is already holding lock: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:756 [inline] __mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 register_netdevice_notifier+0xad/0x860 net/core/dev.c:1607 tee_tg_check+0x1a0/0x280 net/netfilter/xt_TEE.c:106 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:845 check_target net/ipv6/netfilter/ip6_tables.c:538 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:580 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:749 do_replace net/ipv6/netfilter/ip6_tables.c:1165 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1691 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x115/0x150 net/ipv6/ipv6_sockglue.c:928 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 -> #0 (sk_lock-AF_INET6){+.+.}: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3914 lock_sock_nested+0xc2/0x110 net/core/sock.c:2780 lock_sock include/net/sock.h:1463 [inline] do_ipv6_setsockopt.isra.8+0x3c5/0x39d0 net/ipv6/ipv6_sockglue.c:167 ipv6_setsockopt+0xd7/0x150 net/ipv6/ipv6_sockglue.c:922 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2978 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 entry_SYSCALL_64_fastpath+0x29/0xa0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(sk_lock-AF_INET6); lock(rtnl_mutex); lock(sk_lock-AF_INET6); *** DEADLOCK *** 1 lock held by syzkaller041579/3682: #0: (rtnl_mutex){+.+.}, at: [<000000004342eaa9>] rtnl_lock+0x17/0x20 net/core/rtnetlink.c:74 The problem, as Florian noted, is that nf_setsockopt() is always called with the socket held, even if the lock itself is required only for very tight scopes and only for some operation. This patch addresses the issues moving the lock_sock() call only where really needed, namely in ipv*_getorigdst(), so that nf_setsockopt() does not need anymore to acquire both locks. Fixes: 22265a5c3c10 ("netfilter: xt_TEE: resolve oif using netdevice notifiers") Reported-by: syzbot+a4c2dc980ac1af699b36@syzkaller.appspotmail.com Suggested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25net: replace dst_cache ip6_tunnel implementation with the generic onePaolo Abeni
commit 607f725f6f7d5ec3759fbc16224afb60e2152a5b upstream. This also fix a potential race into the existing tunnel code, which could lead to the wrong dst to be permanenty cached: CPU1: CPU2: <xmit on ip6_tunnel> <cache lookup fails> dst = ip6_route_output(...) <tunnel params are changed via nl> dst_cache_reset() // no effect, // the cache is empty dst_cache_set() // the wrong dst // is permanenty stored // into the cache With the new dst implementation the above race is not possible since the first cache lookup after dst_cache_reset will fail due to the timestamp check Signed-off-by: Paolo Abeni <pabeni@redhat.com> Suggested-and-acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Manoj Boopathi Raj <manojboopathi@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-16ip6mr: fix stale iteratorNikolay Aleksandrov
[ Upstream commit 4adfa79fc254efb7b0eb3cd58f62c2c3f805f1ba ] When we dump the ip6mr mfc entries via proc, we initialize an iterator with the table to dump but we don't clear the cache pointer which might be initialized from a prior read on the same descriptor that ended. This can result in lock imbalance (an unnecessary unlock) leading to other crashes and hangs. Clear the cache pointer like ipmr does to fix the issue. Thanks for the reliable reproducer. Here's syzbot's trace: WARNING: bad unlock balance detected! 4.15.0-rc3+ #128 Not tainted syzkaller971460/3195 is trying to release lock (mrt_lock) at: [<000000006898068d>] ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller971460/3195: #0: (&p->lock){+.+.}, at: [<00000000744a6565>] seq_read+0xd5/0x13d0 fs/seq_file.c:165 stack backtrace: CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_unlock_imbalance_bug+0x12f/0x140 kernel/locking/lockdep.c:3561 __lock_release kernel/locking/lockdep.c:3775 [inline] lock_release+0x5f9/0xda0 kernel/locking/lockdep.c:4023 __raw_read_unlock include/linux/rwlock_api_smp.h:225 [inline] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 ipmr_mfc_seq_stop+0xe1/0x130 net/ipv6/ip6mr.c:553 traverse+0x3bc/0xa00 fs/seq_file.c:135 seq_read+0x96a/0x13d0 fs/seq_file.c:189 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 BUG: sleeping function called from invalid context at lib/usercopy.c:25 in_atomic(): 1, irqs_disabled(): 0, pid: 3195, name: syzkaller971460 INFO: lockdep is turned off. CPU: 1 PID: 3195 Comm: syzkaller971460 Not tainted 4.15.0-rc3+ #128 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6060 __might_sleep+0x95/0x190 kernel/sched/core.c:6013 __might_fault+0xab/0x1d0 mm/memory.c:4525 _copy_to_user+0x2c/0xc0 lib/usercopy.c:25 copy_to_user include/linux/uaccess.h:155 [inline] seq_read+0xcb4/0x13d0 fs/seq_file.c:279 proc_reg_read+0xef/0x170 fs/proc/inode.c:217 do_loop_readv_writev fs/read_write.c:673 [inline] do_iter_read+0x3db/0x5b0 fs/read_write.c:897 compat_readv+0x1bf/0x270 fs/read_write.c:1140 do_compat_preadv64+0xdc/0x100 fs/read_write.c:1189 C_SYSC_preadv fs/read_write.c:1209 [inline] compat_SyS_preadv+0x3b/0x50 fs/read_write.c:1203 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x51/0x60 arch/x86/entry/entry_64_compat.S:125 RIP: 0023:0xf7f73c79 RSP: 002b:00000000e574a15c EFLAGS: 00000292 ORIG_RAX: 000000000000014d RAX: ffffffffffffffda RBX: 000000000000000f RCX: 0000000020a3afb0 RDX: 0000000000000001 RSI: 0000000000000067 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 WARNING: CPU: 1 PID: 3195 at lib/usercopy.c:26 _copy_to_user+0xb5/0xc0 lib/usercopy.c:26 Reported-by: syzbot <bot+eceb3204562c41a438fa1f2335e0fe4f6886d669@syzkaller.appspotmail.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ipv6: ip6_make_skb() needs to clear cork.base.dstEric Dumazet
[ Upstream commit 95ef498d977bf44ac094778fd448b98af158a3e6 ] In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee1deb ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ipv6: fix udpv6 sendmsg crash caused by too small MTUMike Maloney
[ Upstream commit 749439bfac6e1a2932c582e2699f91d329658196 ] The logic in __ip6_append_data() assumes that the MTU is at least large enough for the headers. A device's MTU may be adjusted after being added while sendmsg() is processing data, resulting in __ip6_append_data() seeing any MTU. For an mtu smaller than the size of the fragmentation header, the math results in a negative 'maxfraglen', which causes problems when refragmenting any previous skb in the skb_write_queue, leaving it possibly malformed. Instead sendmsg returns EINVAL when the mtu is calculated to be less than IPV6_MIN_MTU. Found by syzkaller: kernel BUG at ./include/linux/skbuff.h:2064! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d0b68580 task.stack: ffff8801ac6b8000 RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline] RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216 RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000 RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0 RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000 R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8 R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000 FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:911 [inline] udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093 udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x352/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9 RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005 RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69 R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000 Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570 RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570 Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31ipv6: Fix getsockopt() for sockets with default IPV6_AUTOFLOWLABELBen Hutchings
[ Upstream commit e9191ffb65d8e159680ce0ad2224e1acbde6985c ] Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31netfilter: fix IS_ERR_VALUE usagePablo Neira Ayuso
commit 92b4423e3a0bc5d43ecde4bcad871f8b5ba04efd upstream. This is a forward-port of the original patch from Andrzej Hajda, he said: "IS_ERR_VALUE should be used only with unsigned long type. Otherwise it can work incorrectly. To achieve this function xt_percpu_counter_alloc is modified to return unsigned long, and its result is assigned to temporary variable to perform error checking, before assigning to .pcnt field. The patch follows conclusion from discussion on LKML [1][2]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2120927 [2]: http://permalink.gmane.org/gmane.linux.kernel/2150581" Original patch from Andrzej is here: http://patchwork.ozlabs.org/patch/582970/ This patch has clashed with input validation fixes for x_tables. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michal Kubecek <mkubecek@suse.cz>
2018-01-31netfilter: use fwmark_reflect in nf_send_resetPau Espin Pedrol
commit cc31d43b4154ad5a7d8aa5543255a93b7e89edc2 upstream. Otherwise, RST packets generated by ipt_REJECT always have mark 0 when the routing is checked later in the same code path. Fixes: e110861f8609 ("net: add a sysctl to reflect the fwmark on replies") Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Pau Espin Pedrol <pau.espin@tessares.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flagsPaolo Abeni
commit 83170f3beccccd7ceb4f9a0ac0c4dc736afde90c upstream. With the commit 48e8aa6e3137 ("ipv6: Set FLOWI_FLAG_KNOWN_NH at flowi6_flags") ip6_pol_route() callers were asked to to set the FLOWI_FLAG_KNOWN_NH properly and xt_TEE was updated accordingly, but with the later refactor in commit bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") the flowi6_flags update was lost. This commit re-add it just before the routing decision. Fixes: bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-31netfilter: x_tables: speed up jump target validationFlorian Westphal
commit f4dc77713f8016d2e8a3295e1c9c53a21f296def upstream. The dummy ruleset I used to test the original validation change was broken, most rules were unreachable and were not tested by mark_source_chains(). In some cases rulesets that used to load in a few seconds now require several minutes. sample ruleset that shows the behaviour: echo "*filter" for i in $(seq 0 100000);do printf ":chain_%06x - [0:0]\n" $i done for i in $(seq 0 100000);do printf -- "-A INPUT -j chain_%06x\n" $i printf -- "-A INPUT -j chain_%06x\n" $i printf -- "-A INPUT -j chain_%06x\n" $i done echo COMMIT [ pipe result into iptables-restore ] This ruleset will be about 74mbyte in size, with ~500k searches though all 500k[1] rule entries. iptables-restore will take forever (gave up after 10 minutes) Instead of always searching the entire blob for a match, fill an array with the start offsets of every single ipt_entry struct, then do a binary search to check if the jump target is present or not. After this change ruleset restore times get again close to what one gets when reverting 36472341017529e (~3 seconds on my workstation). [1] every user-defined rule gets an implicit RETURN, so we get 300k jumps + 100k userchains + 100k returns -> 500k rule entries Fixes: 36472341017529e ("netfilter: x_tables: validate targets of jumps") Reported-by: Jeff Wu <wujiafu@gmail.com> Tested-by: Jeff Wu <wujiafu@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-17ipv6: fix possible mem leaks in ipv6_make_skb()Eric Dumazet
[ Upstream commit 862c03ee1deb7e19e0f9931682e0294ecd1fcaf9 ] ip6_setup_cork() might return an error, while memory allocations have been done and must be rolled back. Fixes: 6422398c2ab0 ("ipv6: introduce ipv6_make_skb") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Reported-by: Mike Maloney <maloney@google.com> Acked-by: Mike Maloney <maloney@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2026-07-20 22:37:12 +0000