summaryrefslogtreecommitdiff
path: root/net/xfrm
AgeCommit message (Collapse)Author
2022-04-15xfrm: fix tunnel model fragmentation behaviorLina Wang
[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ] in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2(). According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it. After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly. 48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50) xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request Signed-off-by: Lina Wang <lina.wang@mediatek.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19xfrm: Fix xfrm migrate issues when address family changesYan Yan
[ Upstream commit e03c3bba351f99ad932e8f06baa9da1afc418e02 ] xfrm_migrate cannot handle address family change of an xfrm_state. The symptons are the xfrm_state will be migrated to a wrong address, and sending as well as receiving packets wil be broken. This commit fixes it by breaking the original xfrm_state_clone method into two steps so as to update the props.family before running xfrm_init_state. As the result, xfrm_state's inner mode, outer mode, type and IP header length in xfrm_state_migrate can be updated with the new address family. Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1885354 Signed-off-by: Yan Yan <evitayan@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19xfrm: Check if_id in xfrm_migrateYan Yan
[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ] This patch enables distinguishing SAs and SPs based on if_id during the xfrm_migrate flow. This ensures support for xfrm interfaces throughout the SA/SP lifecycle. When there are multiple existing SPs with the same direction, the same xfrm_selector and different endpoint addresses, xfrm_migrate might fail with ENODATA. Specifically, the code path for performing xfrm_migrate is: Stage 1: find policy to migrate with xfrm_migrate_policy_find(sel, dir, type, net) Stage 2: find and update state(s) with xfrm_migrate_state_find(mp, net) Stage 3: update endpoint address(es) of template(s) with xfrm_policy_migrate(pol, m, num_migrate) Currently "Stage 1" always returns the first xfrm_policy that matches, and "Stage 3" looks for the xfrm_tmpl that matches the old endpoint address. Thus if there are multiple xfrm_policy with same selector, direction, type and net, "Stage 1" might rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA because it cannot find a xfrm_tmpl with the matching endpoint address. The fix is to allow userspace to pass an if_id and add if_id to the matching rule in Stage 1 and Stage 2 since if_id is a unique ID for xfrm_policy and xfrm_state. For compatibility, if_id will only be checked if the attribute is set. Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1668886 Signed-off-by: Yan Yan <evitayan@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-19Revert "xfrm: state and policy should fail if XFRMA_IF_ID 0"Kai Lueke
commit a3d9001b4e287fc043e5539d03d71a32ab114bcb upstream. This reverts commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 because ID 0 was meant to be used for configuring the policy/state without matching for a specific interface (e.g., Cilium is affected, see https://github.com/cilium/cilium/pull/18789 and https://github.com/cilium/cilium/pull/19019). Signed-off-by: Kai Lueke <kailueke@linux.microsoft.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Revert "xfrm: xfrm_state_mtu should return at least 1280 for ipv6"Jiri Bohac
commit a6d95c5a628a09be129f25d5663a7e9db8261f51 upstream. This reverts commit b515d2637276a3810d6595e10ab02c13bfd0b63a. Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS calculation in ipsec transport mode, resulting complete stalls of TCP connections. This happens when the (P)MTU is 1280 or slighly larger. The desired formula for the MSS is: MSS = (MTU - ESP_overhead) - IP header - TCP header However, the above commit clamps the (MTU - ESP_overhead) to a minimum of 1280, turning the formula into MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header With the (P)MTU near 1280, the calculated MSS is too large and the resulting TCP packets never make it to the destination because they are over the actual PMTU. The above commit also causes suboptimal double fragmentation in xfrm tunnel mode, as described in https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/ The original problem the above commit was trying to fix is now fixed by commit 6596a0229541270fb8d38d989f91b78838e5e9da ("xfrm: fix MTU regression"). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08xfrm: enforce validity of offload input flagsLeon Romanovsky
commit 7c76ecd9c99b6e9a771d813ab1aa7fa428b3ade1 upstream. struct xfrm_user_offload has flags variable that received user input, but kernel didn't check if valid bits were provided. It caused a situation where not sanitized input was forwarded directly to the drivers. For example, XFRM_OFFLOAD_IPV6 define that was exposed, was used by strongswan, but not implemented in the kernel at all. As a solution, check and sanitize input flags to forward XFRM_OFFLOAD_INBOUND to the drivers. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08xfrm: fix the if_id check in changelinkAntony Antony
commit 6d0d95a1c2b07270870e7be16575c513c29af3f1 upstream. if_id will be always 0, because it was not yet initialized. Fixes: 8dce43919566 ("xfrm: interface with if_id 0 should return error") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27xfrm: Don't accidentally set RTO_ONLINK in decode_session4()Guillaume Nault
commit 23e7b1bfed61e301853b5e35472820d919498278 upstream. Similar to commit 94e2238969e8 ("xfrm4: strip ECN bits from tos field"), clear the ECN bits from iph->tos when setting ->flowi4_tos. This ensures that the last bit of ->flowi4_tos is cleared, so ip_route_output_key_hash() isn't going to restrict the scope of the route lookup. Use ~INET_ECN_MASK instead of IPTOS_RT_MASK, because we have no reason to clear the high order bits. Found by code inspection, compile tested only. Fixes: 4da3089f2b58 ("[IPSEC]: Use TOS when doing tunnel lookups") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27xfrm: fix policy lookup for ipv6 gre packetsGhalem Boudour
commit bcf141b2eb551b3477b24997ebc09c65f117a803 upstream. On egress side, xfrm lookup is called from __gre6_xmit() with the fl6_gre_key field not initialized leading to policies selectors check failure. Consequently, gre packets are sent without encryption. On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not checked against xfrm policies. Like for egress side, fl6_gre_key should be correctly set, this is now done in decode_session6(). Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Cc: stable@vger.kernel.org Signed-off-by: Ghalem Boudour <ghalem.boudour@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27xfrm: state and policy should fail if XFRMA_IF_ID 0Antony Antony
[ Upstream commit 68ac0f3810e76a853b5f7b90601a05c3048b8b54 ] xfrm ineterface does not allow xfrm if_id = 0 fail to create or update xfrm state and policy. With this commit: ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0 RTNETLINK answers: Invalid argument ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \ reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \ 0x1111111111111111111111111111111111111111 96 if_id 0 RTNETLINK answers: Invalid argument v1->v2 change: - add Fixes: tag Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27xfrm: interface with if_id 0 should return errorAntony Antony
[ Upstream commit 8dce43919566f06e865f7e8949f5c10d8c2493f5 ] xfrm interface if_id = 0 would cause xfrm policy lookup errors since Commit 9f8550e4bd9d. Now explicitly fail to create an xfrm interface when if_id = 0 With this commit: ip link add ipsec0 type xfrm dev lo if_id 0 Error: if_id must be non zero. v1->v2 change: - add Fixes: tag Fixes: 9f8550e4bd9d ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces") Signed-off-by: Antony Antony <antony.antony@secunet.com> Reviewed-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27xfrm: fix a small bug in xfrm_sa_len()Eric Dumazet
[ Upstream commit 7770a39d7c63faec6c4f33666d49a8cb664d0482 ] copy_user_offload() will actually push a struct struct xfrm_user_offload, which is different than (struct xfrm_state *)->xso (struct xfrm_state_offload) Fixes: d77e38e612a01 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-19xfrm: Fix error reporting in xfrm_state_construct.Steffen Klassert
[ Upstream commit 6fd06963fa74197103cdbb4b494763127b3f2f34 ] When memory allocation for XFRMA_ENCAP or XFRMA_COADDR fails, the error will not be reported because the -ENOMEM assignment to the err variable is overwritten before. Fix this by moving these two in front of the function so that memory allocation failures will be reported. Reported-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14xfrm: xfrm_state_mtu should return at least 1280 for ipv6Sabrina Dubroca
[ Upstream commit b515d2637276a3810d6595e10ab02c13bfd0b63a ] Jianwen reported that IPv6 Interoperability tests are failing in an IPsec case where one of the links between the IPsec peers has an MTU of 1280. The peer generates a packet larger than this MTU, the router replies with a "Packet too big" message indicating an MTU of 1280. When the peer tries to send another large packet, xfrm_state_mtu returns 1280 - ipsec_overhead, which causes ip6_setup_cork to fail with EINVAL. We can fix this by forcing xfrm_state_mtu to return IPV6_MIN_MTU when IPv6 is used. After going through IPsec, the packet will then be fragmented to obey the actual network's PMTU, just before leaving the host. Currently, TFC padding is capped to PMTU - overhead to avoid fragementation: after padding and encapsulation, we still fit within the PMTU. That behavior is preserved in this patch. Fixes: 91657eafb64b ("xfrm: take net hdr len into account for esp payload size calculation") Reported-by: Jianwen Ji <jiji@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14net: xfrm: Localize sequence counter per network namespaceAhmed S. Darwish
[ Upstream commit e88add19f68191448427a6e4eb059664650a837f ] A sequence counter write section must be serialized or its internal state can get corrupted. The "xfrm_state_hash_generation" seqcount is global, but its write serialization lock (net->xfrm.xfrm_state_lock) is instantiated per network namespace. The write protection is thus insufficient. To provide full protection, localize the sequence counter per network namespace instead. This should be safe as both the seqcount read and write sections access data exclusively within the network namespace. It also lays the foundation for transforming "xfrm_state_hash_generation" data type from seqcount_t to seqcount_LOCKNAME_t in further commits. Fixes: b65e3d7be06f ("xfrm: state: add sequence count to detect hash resizes") Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-14xfrm: interface: fix ipv4 pmtu check to honor ip header dfEyal Birger
[ Upstream commit 8fc0e3b6a8666d656923d214e4dc791e9a17164a ] Frag needed should only be sent if the header enables DF. This fix allows packets larger than MTU to pass the xfrm interface and be fragmented after encapsulation, aligning behavior with non-interface xfrm. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-04xfrm: interface: use icmp_ndo_send helperJason A. Donenfeld
commit 45942ba890e6f35232727a5fa33d732681f4eb9f upstream. Because xfrmi is calling icmp from network device context, it should use the ndo helper so that the rate limiting applies correctly. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-03xfrm: Fix wraparound in xfrm_policy_addr_delta()Visa Hankala
[ Upstream commit da64ae2d35d3673233f0403b035d4c6acbf71965 ] Use three-way comparison for address components to avoid integer wraparound in the result of xfrm_policy_addr_delta(). This ensures that the search trees are built and traversed correctly. Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0. Prefix /0 has only one equivalence class. Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address") Signed-off-by: Visa Hankala <visa@hankala.org> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03xfrm: fix disable_xfrm sysctl when used on xfrm interfacesEyal Birger
[ Upstream commit 9f8550e4bd9d78a8436c2061ad2530215f875376 ] The disable_xfrm flag signals that xfrm should not be performed during routing towards a device before reaching device xmit. For xfrm interfaces this is usually desired as they perform the outbound policy lookup as part of their xmit using their if_id. Before this change enabling this flag on xfrm interfaces prevented them from xmitting as xfrm_lookup_with_ifid() would not perform a policy lookup in case the original dst had the DST_NOXFRM flag. This optimization is incorrect when the lookup is done by the xfrm interface xmit logic. Fix by performing policy lookup when invoked by xfrmi as if_id != 0. Similarly it's unlikely for the 'no policy exists on net' check to yield any performance benefits when invoked from xfrmi. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03xfrm: Fix oops in xfrm_replay_advance_bmpShmulik Ladkani
[ Upstream commit 56ce7c25ae1525d83cf80a880cf506ead1914250 ] When setting xfrm replay_window to values higher than 32, a rare page-fault occurs in xfrm_replay_advance_bmp: BUG: unable to handle page fault for address: ffff8af350ad7920 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD ad001067 P4D ad001067 PUD 0 Oops: 0002 [#1] SMP PTI CPU: 3 PID: 30 Comm: ksoftirqd/3 Kdump: loaded Not tainted 5.4.52-050452-generic #202007160732 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:xfrm_replay_advance_bmp+0xbb/0x130 RSP: 0018:ffffa1304013ba40 EFLAGS: 00010206 RAX: 000000000000010d RBX: 0000000000000002 RCX: 00000000ffffff4b RDX: 0000000000000018 RSI: 00000000004c234c RDI: 00000000ffb3dbff RBP: ffffa1304013ba50 R08: ffff8af330ad7920 R09: 0000000007fffffa R10: 0000000000000800 R11: 0000000000000010 R12: ffff8af29d6258c0 R13: ffff8af28b95c700 R14: 0000000000000000 R15: ffff8af29d6258fc FS: 0000000000000000(0000) GS:ffff8af339ac0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff8af350ad7920 CR3: 0000000015ee4000 CR4: 00000000001406e0 Call Trace: xfrm_input+0x4e5/0xa10 xfrm4_rcv_encap+0xb5/0xe0 xfrm4_udp_encap_rcv+0x140/0x1c0 Analysis revealed offending code is when accessing: replay_esn->bmp[nr] |= (1U << bitnr); with 'nr' being 0x07fffffa. This happened in an SMP system when reordering of packets was present; A packet arrived with a "too old" sequence number (outside the window, i.e 'diff > replay_window'), and therefore the following calculation: bitnr = replay_esn->replay_window - (diff - pos); yields a negative result, but since bitnr is u32 we get a large unsigned quantity (in crash dump above: 0xffffff4b seen in ecx). This was supposed to be protected by xfrm_input()'s former call to: if (x->repl->check(x, skb, seq)) { However, the state's spinlock x->lock is *released* after '->check()' is performed, and gets re-acquired before '->advance()' - which gives a chance for a different core to update the xfrm state, e.g. by advancing 'replay_esn->seq' when it encounters more packets - leading to a 'diff > replay_window' situation when original core continues to xfrm_replay_advance_bmp(). An attempt to fix this issue was suggested in commit bcf66bf54aab ("xfrm: Perform a replay check after return from async codepaths"), by calling 'x->repl->recheck()' after lock is re-acquired, but fix applied only to asyncronous crypto algorithms. Augment the fix, by *always* calling 'recheck()' - irrespective if we're using async crypto. Fixes: 0ebea8ef3559 ("[IPSEC]: Move state lock into x->type->input") Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18net: xfrm: fix a race condition during allocing spizhuoliang zhang
[ Upstream commit a779d91314ca7208b7feb3ad817b62904397c56d ] we found that the following race condition exists in xfrm_alloc_userspi flow: user thread state_hash_work thread ---- ---- xfrm_alloc_userspi() __find_acq_core() /*alloc new xfrm_state:x*/ xfrm_state_alloc() /*schedule state_hash_work thread*/ xfrm_hash_grow_check() xfrm_hash_resize() xfrm_alloc_spi /*hold lock*/ x->id.spi = htonl(spi) spin_lock_bh(&net->xfrm.xfrm_state_lock) /*waiting lock release*/ xfrm_hash_transfer() spin_lock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi*/ hlist_add_head_rcu(&x->byspi) spin_unlock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi 2 times*/ hlist_add_head_rcu(&x->byspi) 1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist in __find_acq_core() on the LHS; 2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state (include x) into the new bydst hlist and new byspi hlist; 3. user thread on the LHS gets the lock and adds x into the new byspi hlist again. So the same xfrm_state (x) is added into the same list_hash (net->xfrm.state_byspi) 2 times that makes the list_hash become an inifite loop. To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved to the back of spin_lock_bh, sothat state_hash_work thread no longer add x which id.spi is zero into the hash_list. Fixes: f034b5d4efdf ("[XFRM]: Dynamic xfrm_state hash table sizing.") Signed-off-by: zhuoliang zhang <zhuoliang.zhang@mediatek.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrm: Use correct address family in xfrm_state_findHerbert Xu
[ Upstream commit e94ee171349db84c7cfdc5fefbebe414054d0924 ] The struct flowi must never be interpreted by itself as its size depends on the address family. Therefore it must always be grouped with its original family value. In this particular instance, the original family value is lost in the function xfrm_state_find. Therefore we get a bogus read when it's coupled with the wrong family which would occur with inter- family xfrm states. This patch fixes it by keeping the original family value. Note that the same bug could potentially occur in LSM through the xfrm_state_pol_flow_match hook. I checked the current code there and it seems to be safe for now as only secid is used which is part of struct flowi_common. But that API should be changed so that so that we don't get new bugs in the future. We could do that by replacing fl with just secid or adding a family field. Reported-by: syzbot+577fbac3145a6eb2e7a5@syzkaller.appspotmail.com Fixes: 48b8d78315bf ("[XFRM]: State selection update to use inner...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrm: clone whole liftime_cur structure in xfrm_do_migrateAntony Antony
[ Upstream commit 8366685b2883e523f91e9816d7be371eb1144749 ] When we clone state only add_time was cloned. It missed values like bytes, packets. Now clone the all members of the structure. v1->v3: - use memcpy to copy the entire structure Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrm: clone XFRMA_SEC_CTX in xfrm_do_migrateAntony Antony
[ Upstream commit 7aa05d304785204703a67a6aa7f1db402889a172 ] XFRMA_SEC_CTX was not cloned from the old to the new. Migrate this attribute during XFRMA_MSG_MIGRATE v1->v2: - return -ENOMEM on error v2->v3: - fix return type to int Fixes: 80c9abaabf42 ("[XFRM]: Extension for dynamic update of endpoint address(es)") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrm: clone XFRMA_SET_MARK in xfrm_do_migrateAntony Antony
[ Upstream commit 545e5c571662b1cd79d9588f9d3b6e36985b8007 ] XFRMA_SET_MARK and XFRMA_SET_MARK_MASK was not cloned from the old to the new. Migrate these two attributes during XFRMA_MSG_MIGRATE Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.") Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14xfrmi: drop ignore_df check before updating pmtuSabrina Dubroca
commit 45a36a18d01907710bad5258d81f76c18882ad88 upstream. xfrm interfaces currently test for !skb->ignore_df when deciding whether to update the pmtu on the skb's dst. Because of this, no pmtu exception is created when we do something like: ping -s 1438 <dest> By dropping this check, the pmtu exception will be created and the next ping attempt will work. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-05xfrm: policy: match with both mark and mask on user interfacesXin Long
[ Upstream commit 4f47e8ab6ab796b5380f74866fa5287aca4dcc58 ] In commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), it would take 'priority' to make a policy unique, and allow duplicated policies with different 'priority' to be added, which is not expected by userland, as Tobias reported in strongswan. To fix this duplicated policies issue, and also fix the issue in commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), when doing add/del/get/update on user interfaces, this patch is to change to look up a policy with both mark and mask by doing: mark.v == pol->mark.v && mark.m == pol->mark.m and leave the check: (mark & pol->mark.m) == pol->mark.v for tx/rx path only. As the userland expects an exact mark and mask match to manage policies. v1->v2: - make xfrm_policy_mark_match inline and fix the changelog as Tobias suggested. Fixes: 295fae568885 ("xfrm: Allow user space manipulation of SPD mark") Fixes: ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list") Reported-by: Tobias Brunner <tobias@strongswan.org> Tested-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30xfrm: Fix double ESP trailer insertion in IPsec crypto offload.Huy Nguyen
[ Upstream commit 94579ac3f6d0820adc83b5dc5358ead0158101e9 ] During IPsec performance testing, we see bad ICMP checksum. The error packet has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call is from ip_output, but the packet cannot be sent because netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second call is from NET_TX softirq. However after the first call, the packet already has the ESP trailer. Fix by marking the skb with XFRM_XMIT bit after the packet is handled by validate_xmit_xfrm to avoid duplicate ESP trailer insertion. Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-03xfrm: fix a NULL-ptr deref in xfrm_local_errorXin Long
commit f6a23d85d078c2ffde79c66ca81d0a1dde451649 upstream. This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f319f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d48746e4b ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03xfrm: fix a warning in xfrm_policy_insert_listXin Long
commit ed17b8d377eaf6b4a01d46942b4c647378a79bdd upstream. This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03xfrm interface: fix oops when deleting a x-netns interfaceNicolas Dichtel
commit c95c5f58b35ef995f66cb55547eee6093ab5fcb8 upstream. Here is the steps to reproduce the problem: ip netns add foo ip netns add bar ip -n foo link add xfrmi0 type xfrm dev lo if_id 42 ip -n foo link set xfrmi0 netns bar ip netns del foo ip netns del bar Which results to: [ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI [ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1 [ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 186.689420] Workqueue: netns cleanup_net [ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface] [ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08 [ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286 [ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0 [ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000 [ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040 [ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80 [ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8 [ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000 [ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0 [ 186.700221] Call Trace: [ 186.700508] rollback_registered_many+0x32b/0x3fd [ 186.701058] ? __rtnl_unlock+0x20/0x3d [ 186.701494] ? arch_local_irq_save+0x11/0x17 [ 186.702012] unregister_netdevice_many+0x12/0x55 [ 186.702594] default_device_exit_batch+0x12b/0x150 [ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60 [ 186.703719] cleanup_net+0x17d/0x234 [ 186.704138] process_one_work+0x196/0x2e8 [ 186.704652] worker_thread+0x1a4/0x249 [ 186.705087] ? cancel_delayed_work+0x92/0x92 [ 186.705620] kthread+0x105/0x10f [ 186.706000] ? __kthread_bind_mask+0x57/0x57 [ 186.706501] ret_from_fork+0x35/0x40 [ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy [ 186.710423] ---[ end trace 463bba18105537e5 ]--- The problem is that x-netns xfrm interface are not removed when the link netns is removed. This causes later this oops when thoses interfaces are removed. Let's add a handler to remove all interfaces related to a netns when this netns is removed. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_outputXin Long
commit a204aef9fd77dce1efd9066ca4e44eede99cd858 upstream. An use-after-free crash can be triggered when sending big packets over vxlan over esp with esp offload enabled: [] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] Call Trace: [] dump_stack+0x75/0xa0 [] kasan_report+0x37/0x50 [] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] ipv6_gso_segment+0x2c8/0x13c0 [] skb_mac_gso_segment+0x1cb/0x420 [] skb_udp_tunnel_segment+0x6b5/0x1c90 [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] esp4_gso_segment+0xae8/0x1709 [esp4_offload] [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] __skb_gso_segment+0x2d7/0x5f0 [] validate_xmit_skb+0x527/0xb10 [] __dev_queue_xmit+0x10f8/0x2320 <--- [] ip_finish_output2+0xa2e/0x1b50 [] ip_output+0x1a8/0x2f0 [] xfrm_output_resume+0x110e/0x15f0 [] __xfrm4_output+0xe1/0x1b0 [] xfrm4_output+0xa0/0x200 [] iptunnel_xmit+0x5a7/0x920 [] vxlan_xmit_one+0x1658/0x37a0 [vxlan] [] vxlan_xmit+0x5e4/0x3ec8 [vxlan] [] dev_hard_start_xmit+0x125/0x540 [] __dev_queue_xmit+0x17bd/0x2320 <--- [] ip6_finish_output2+0xb20/0x1b80 [] ip6_output+0x1b3/0x390 [] ip6_xmit+0xb82/0x17e0 [] inet6_csk_xmit+0x225/0x3d0 [] __tcp_transmit_skb+0x1763/0x3520 [] tcp_write_xmit+0xd64/0x5fe0 [] __tcp_push_pending_frames+0x8c/0x320 [] tcp_sendmsg_locked+0x2245/0x3500 [] tcp_sendmsg+0x27/0x40 As on the tx path of vxlan over esp, skb->inner_network_header would be set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can overwrite the former one. It causes skb_udp_tunnel_segment() to use a wrong skb->inner_network_header, then the issue occurs. This patch is to fix it by calling xfrm_output_gso() instead when the inner_protocol is set, in which gso_segment of inner_protocol will be done first. While at it, also improve some code around. Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03xfrm: do pskb_pull properly in __xfrm_transport_prepXin Long
commit 06a0afcfe2f551ff755849ea2549b0d8409fd9a0 upstream. For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- and in __xfrm_transport_prep(): pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len); it will pull the data pointer to the wrong position, as it missed the nexthdrs/dest opts. This patch is to fix it by using: pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len); as we can be sure transport_header points to ESP header at that moment. It also fixes a panic when packets with ipv6 nexthdr are sent over esp6 transport mode: [ 100.473845] kernel BUG at net/core/skbuff.c:4325! [ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260 [ 100.494355] Call Trace: [ 100.494829] skb_to_sgvec+0x11/0x40 [ 100.495492] esp6_output_tail+0x12e/0x550 [esp6] [ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload] [ 100.498029] validate_xmit_xfrm+0x22f/0x2e0 [ 100.499604] __dev_queue_xmit+0x589/0x910 [ 100.502928] ip6_finish_output2+0x2a5/0x5a0 [ 100.503718] ip6_output+0x6c/0x120 [ 100.505198] xfrm_output_resume+0x4bf/0x530 [ 100.508683] xfrm6_output+0x3a/0xc0 [ 100.513446] inet6_csk_xmit+0xa1/0xf0 [ 100.517335] tcp_sendmsg+0x27/0x40 [ 100.517977] sock_sendmsg+0x3e/0x60 [ 100.518648] __sys_sendto+0xee/0x160 Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-03xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_inputXin Long
commit afcaf61be9d1dbdee5ec186d1dcc67b6b692180f upstream. For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01xfrm: policy: Fix doulbe free in xfrm_policy_timerYueHaibing
commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquireXin Long
commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01xfrm: fix uctx len check in verify_sec_ctx_lenXin Long
commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-01xfrm: handle NETDEV_UNREGISTER for xfrm deviceRaed Salem
commit 03891f820c2117b19e80b370281eb924a09cf79f upstream. This patch to handle the asynchronous unregister device event so the device IPsec offload resources could be cleanly released. Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-05xfrm: interface: do not confirm neighbor when do pmtu updateXu Wang
[ Upstream commit 8aaea2b0428b6aad7c7e22d3fddc31a78bb1d724 ] When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-05xfrm interface: fix packet tx through bpf_redirect()Nicolas Dichtel
[ Upstream commit f042365dbffea98fb8148c98c700402e8d099f02 ] With an ebpf program that redirects packets through a xfrm interface, packets are dropped because no dst is attached to skb. This could also be reproduced with an AF_PACKET socket, with the following python script (xfrm1 is a xfrm interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('xfrm1', 0x800, 0, 0)) It was also not possible to send an ip packet through an AF_PACKET socket because a LL header was expected. Let's remove those LL header constraints. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12xfrm: release device reference for invalid stateXiaodong Xu
An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Reported-by: Bo Chen <chenborfc@163.com> Tested-by: Bo Chen <chenborfc@163.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-11-07xfrm: Fix memleak on xfrm state destroySteffen Klassert
We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-10-01netfilter: drop bridge nf reset from nf_resetFlorian Westphal
commit 174e23810cd31 ("sk_buff: drop all skb extensions on free and skb scrubbing") made napi recycle always drop skb extensions. The additional skb_ext_del() that is performed via nf_reset on napi skb recycle is not needed anymore. Most nf_reset() calls in the stack are there so queued skb won't block 'rmmod nf_conntrack' indefinitely. This removes the skb_ext_del from nf_reset, and renames it to a more fitting nf_reset_ct(). In a few selected places, add a call to skb_ext_reset to make sure that no active extensions remain. I am submitting this for "net", because we're still early in the release cycle. The patch applies to net-next too, but I think the rename causes needless divergence between those trees. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2019-09-05 1) Several xfrm interface fixes from Nicolas Dichtel: - Avoid an interface ID corruption on changelink. - Fix wrong intterface names in the logs. - Fix a list corruption when changing network namespaces. - Fix unregistation of the underying phydev. 2) Fix a potential warning when merging xfrm_plocy nodes. From Florian Westphal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-24xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md modeHangbin Liu
In decode_session{4,6} there is a possibility that the skb dst dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv6 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmpv6_send - icmpv6_route_lookup - xfrm_decode_session_reverse - decode_session4 - oif = skb_dst(skb)->dev->ifindex; <-- here - decode_session6 - oif = skb_dst(skb)->dev->ifindex; <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the skb_dst(skb)->dev is actually not needed as we called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif; So make a dst dev check here should be clean and safe. v4: No changes. v3: No changes. v2: fix the issue in decode_session{4,6} instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-20xfrm: policy: avoid warning splat when merging nodesFlorian Westphal
syzbot reported a splat: xfrm_policy_inexact_list_reinsert+0x625/0x6e0 net/xfrm/xfrm_policy.c:877 CPU: 1 PID: 6756 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #57 Call Trace: xfrm_policy_inexact_node_reinsert net/xfrm/xfrm_policy.c:922 [inline] xfrm_policy_inexact_node_merge net/xfrm/xfrm_policy.c:958 [inline] xfrm_policy_inexact_insert_node+0x537/0xb50 net/xfrm/xfrm_policy.c:1023 xfrm_policy_inexact_alloc_chain+0x62b/0xbd0 net/xfrm/xfrm_policy.c:1139 xfrm_policy_inexact_insert+0xe8/0x1540 net/xfrm/xfrm_policy.c:1182 xfrm_policy_insert+0xdf/0xce0 net/xfrm/xfrm_policy.c:1574 xfrm_add_policy+0x4cf/0x9b0 net/xfrm/xfrm_user.c:1670 xfrm_user_rcv_msg+0x46b/0x720 net/xfrm/xfrm_user.c:2676 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2477 xfrm_netlink_rcv+0x74/0x90 net/xfrm/xfrm_user.c:2684 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x809/0x9a0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0xa70/0xd30 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] There is no reproducer, however, the warning can be reproduced by adding rules with ever smaller prefixes. The sanity check ("does the policy match the node") uses the prefix value of the node before its updated to the smaller value. To fix this, update the prefix earlier. The bug has no impact on tree correctness, this is only to prevent a false warning. Reported-by: syzbot+8cc27ace5f6972910b31@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17xfrm interface: fix management of phydevNicolas Dichtel
With the current implementation, phydev cannot be removed: $ ip link add dummy type dummy $ ip link add xfrm1 type xfrm dev dummy if_id 1 $ ip l d dummy kernel:[77938.465445] unregister_netdevice: waiting for dummy to become free. Usage count = 1 Manage it like in ip tunnels, ie just keep the ifindex. Not that the side effect, is that the phydev is now optional. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Julien Floret <julien.floret@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-11 13:03:35 +0000