summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2013-10-01netfilter: ipset: Fix serious failure in CIDR trackingOliver Smith
commit 2cf55125c64d64cc106e204d53b107094762dfdf upstream. This fixes a serious bug affecting all hash types with a net element - specifically, if a CIDR value is deleted such that none of the same size exist any more, all larger (less-specific) values will then fail to match. Adding back any prefix with a CIDR equal to or more specific than the one deleted will fix it. Steps to reproduce: ipset -N test hash:net ipset -A test 1.1.0.0/16 ipset -A test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS in set ipset -D test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS NOT in set This is due to the fact that the nets counter was unconditionally decremented prior to the iteration that shifts up the entries. Now, we first check if there is a proceeding entry and if not, decrement it and return. Otherwise, we proceed to iterate and then zero the last element, which, in most cases, will already be zero. Signed-off-by: Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01rpc: let xdr layer allocate gssproxy receieve pagesJ. Bruce Fields
commit d4a516560fc96a9d486a9939bcb567e3fdce8f49 upstream. In theory the linux cred in a gssproxy reply can include up to NGROUPS_MAX data, 256K of data. In the common case we expect it to be shorter. So do as the nfsv3 ACL code does and let the xdr code allocate the pages as they come in, instead of allocating a lot of pages that won't typically be used. Tested-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01rpc: fix huge kmalloc's in gss-proxyJ. Bruce Fields
commit 9dfd87da1aeb0fd364167ad199f40fe96a6a87be upstream. The reply to a gssproxy can include up to NGROUPS_MAX gid's, which will take up more than a page. We therefore need to allocate an array of pages to hold the reply instead of trying to allocate a single huge buffer. Tested-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01rpc: comment on linux_cred encoding, treat all as unsignedJ. Bruce Fields
commit 6a36978e6931e6601be586eb313375335f2cfaa3 upstream. The encoding of linux creds is a bit confusing. Also: I think in practice it doesn't really matter whether we treat any of these things as signed or unsigned, but unsigned seems more straightforward: uid_t/gid_t are unsigned and it simplifies the ngroups overflow check. Tested-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-01rpc: clean up decoding of gssproxy linux credsJ. Bruce Fields
commit 778e512bb1d3315c6b55832248cd30c566c081d7 upstream. We can use the normal coding infrastructure here. Two minor behavior changes: - we're assuming no wasted space at the end of the linux cred. That seems to match gss-proxy's behavior, and I can't see why it would need to do differently in the future. - NGROUPS_MAX check added: note groups_alloc doesn't do this, this is the caller's responsibility. Tested-by: Simo Sorce <simo@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26libceph: use pg_num_mask instead of pgp_num_mask for pg.seed calcSage Weil
commit 9542cf0bf9b1a3adcc2ef271edbcbdba03abf345 upstream. Fix a typo that used the wrong bitmask for the pg.seed calculation. This is normally unnoticed because in most cases pg_num == pgp_num. It is, however, a bug that is easily corrected. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <alex.elder@linary.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26libceph: unregister request in __map_request failed and nofail == falsemajianpeng
commit 73d9f7eef3d98c3920e144797cc1894c6b005a1e upstream. For nofail == false request, if __map_request failed, the caller does cleanup work, like releasing the relative pages. It doesn't make any sense to retry this request. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-26net: Check the correct namespace when spoofing pid over SCM_RIGHTSAndy Lutomirski
commit d661684cf6820331feae71146c35da83d794467e upstream. This is a security bug. The follow-up will fix nsproxy to discourage this type of issue from happening again. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: ipv6: tcp: fix potential use after free in tcp_v6_do_rcvDaniel Borkmann
[ Upstream commit 3a1c756590633c0e86df606e5c618c190926a0df ] In tcp_v6_do_rcv() code, when processing pkt options, we soley work on our skb clone opt_skb that we've created earlier before entering tcp_rcv_established() on our way. However, only in condition ... if (np->rxopt.bits.rxtclass) np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); ... we work on skb itself. As we extract every other information out of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can already be released by tcp_rcv_established() earlier on. When we try to access it in ipv6_hdr(), we will dereference freed skb. [ Bug added by commit 4c507d2897bd9b ("net: implement IP_RECVTOS for IP_PKTOPTIONS") ] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: fix null pointer dereference in __ip6addrlbl_addHannes Frederic Sowa
[ Upstream commit 639739b5e609a5074839bb22fc061b37baa06269 ] Commit b67bfe0d42cac56c512dd5da4b1b347a23f4b70a ("hlist: drop the node parameter from iterators") changed the behavior of hlist_for_each_entry_safe to leave the p argument NULL. Fix this up by tracking the last argument. Reported-by: Michele Baldessari <michele@acksyn.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Michele Baldessari <michele@acksyn.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTOJiri Bohac
[ Upstream commit 61e76b178dbe7145e8d6afa84bb4ccea71918994 ] RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773 Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: bridge: convert MLDv2 Query MRC into msecs_to_jiffies for max_delayDaniel Borkmann
[ Upstream commit 2d98c29b6fb3de44d9eaa73c09f9cf7209346383 ] While looking into MLDv1/v2 code, I noticed that bridging code does not convert it's max delay into jiffies for MLDv2 messages as we do in core IPv6' multicast code. RFC3810, 5.1.3. Maximum Response Code says: The Maximum Response Code field specifies the maximum time allowed before sending a responding Report. The actual time allowed, called the Maximum Response Delay, is represented in units of milliseconds, and is derived from the Maximum Response Code as follows: [...] As we update timers that work with jiffies, we need to convert it. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Linus Lüssing <linus.luessing@web.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: revert 8728c544a9c ("net: dev_pick_tx() fix")Eric Dumazet
[ Upstream commit 702821f4ea6f68db18aa1de7d8ed62c6ba586a64 ] commit 8728c544a9cbdc ("net: dev_pick_tx() fix") and commit b6fe83e9525a ("bonding: refine IFF_XMIT_DST_RELEASE capability") are quite incompatible : Queue selection is disabled because skb dst was dropped before entering bonding device. This causes major performance regression, mainly because TCP packets for a given flow can be sent to multiple queues. This is particularly visible when using the new FQ packet scheduler with MQ + FQ setup on the slaves. We can safely revert the first commit now that 416186fbf8c5b ("net: Split core bits of netdev_pick_tx into __netdev_pick_tx") properly caps the queue_index. Reported-by: Xi Wang <xii@google.com> Diagnosed-by: Xi Wang <xii@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Denys Fedorysychenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tipc: set sk_err correctly when connection failsErik Hugne
[ Upstream commit 2c8d85182348021fc0a1bed193a4be4161dc8364 ] Should a connect fail, if the publication/server is unavailable or due to some other error, a positive value will be returned and errno is never set. If the application code checks for an explicit zero return from connect (success) or a negative return (failure), it will not catch the error and subsequent send() calls will fail as shown from the strace snippet below. socket(0x1e /* PF_??? */, SOCK_SEQPACKET, 0) = 3 connect(3, {sa_family=0x1e /* AF_??? */, sa_data="\2\1\322\4\0\0\322\4\0\0\0\0\0\0"}, 16) = 111 sendto(3, "test", 4, 0, NULL, 0) = -1 EPIPE (Broken pipe) The reason for this behaviour is that TIPC wrongly inverts error codes set in sk_err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: tcp_make_synack() should use sock_wmallocPhil Oester
[ Upstream commit eb8895debe1baba41fcb62c78a16f0c63c21662a ] In commit 90ba9b19 (tcp: tcp_make_synack() can use alloc_skb()), Eric changed the call to sock_wmalloc in tcp_make_synack to alloc_skb. In doing so, the netfilter owner match lost its ability to block the SYNACK packet on outbound listening sockets. Revert the change, restoring the owner match functionality. This closes netfilter bugzilla #847. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: Don't depend on per socket memory for neighbour discovery messagesThomas Graf
[ Upstream commit 25a6e6b84fba601eff7c28d30da8ad7cfbef0d43 ] Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv4: sendto/hdrincl: don't use destination address found in headerChris Clark
[ Upstream commit c27c9322d015dc1d9dfdf31724fca71c0476c4d1 ] ipv4: raw_sendmsg: don't use header's destination address A sendto() regression was bisected and found to start with commit f8126f1d5136be1 (ipv4: Adjust semantics of rt->rt_gateway.) The problem is that it tries to ARP-lookup the constructed packet's destination address rather than the explicitly provided address. Fix this using FLOWI_FLAG_KNOWN_NH so that given nexthop is used. cf. commit 2ad5b9e4bd314fc685086b99e90e5de3bc59e26b Reported-by: Chris Clark <chris.clark@alcatel-lucent.com> Bisected-by: Chris Clark <chris.clark@alcatel-lucent.com> Tested-by: Chris Clark <chris.clark@alcatel-lucent.com> Suggested-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Chris Clark <chris.clark@alcatel-lucent.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: don't apply tsoffset if rcv_tsecr is zeroAndrew Vagin
[ Upstream commit e3e12028315749b7fa2edbc37328e5847be9ede9 ] The zero value means that tsecr is not valid, so it's a special case. tsoffset is used to customize tcp_time_stamp for one socket. tsoffset is usually zero, it's used when a socket was moved from one host to another host. Currently this issue affects logic of tcp_rcv_rtt_measure_ts. Due to incorrect value of rcv_tsecr, tcp_rcv_rtt_measure_ts sets rto to TCP_RTO_MAX. Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: initialize rcv_tstamp for restored socketsAndrew Vagin
[ Upstream commit c7781a6e3c4a9a17e144ec2db00ebfea327bd627 ] u32 rcv_tstamp; /* timestamp of last received ACK */ Its value used in tcp_retransmit_timer, which closes socket if the last ack was received more then TCP_RTO_MAX ago. Currently rcv_tstamp is initialized to zero and if tcp_retransmit_timer is called before receiving a first ack, the connection is closed. This patch initializes rcv_tstamp to a timestamp, when a socket was restored. Reported-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net_sched: restore "linklayer atm" handlingJesper Dangaard Brouer
[ Upstream commit 8a8e3d84b1719a56f9151909e80ea6ebc5b8e318 ] commit 56b765b79 ("htb: improved accuracy at high rates") broke the "linklayer atm" handling. tc class add ... htb rate X ceil Y linklayer atm The linklayer setting is implemented by modifying the rate table which is send to the kernel. No direct parameter were transferred to the kernel indicating the linklayer setting. The commit 56b765b79 ("htb: improved accuracy at high rates") removed the use of the rate table system. To keep compatible with older iproute2 utils, this patch detects the linklayer by parsing the rate table. It also supports future versions of iproute2 to send this linklayer parameter to the kernel directly. This is done by using the __reserved field in struct tc_ratespec, to convey the choosen linklayer option, but only using the lower 4 bits of this field. Linklayer detection is limited to speeds below 100Mbit/s, because at high rates the rtab is gets too inaccurate, so bad that several fields contain the same values, this resembling the ATM detect. Fields even start to contain "0" time to send, e.g. at 1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have been more broken than we first realized. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14bridge: Use the correct bit length for bitmap functions in the VLAN codeToshiaki Makita
[ Upstream commit ef40b7ef181b7b1a24df2ef2d1ef84956bffa635 ] The VLAN code needs to know the length of the per-port VLAN bitmap to perform its most basic operations (retrieving VLAN informations, removing VLANs, forwarding database manipulation, etc). Unfortunately, in the current implementation we are using a macro that indicates the bitmap size in longs in places where the size in bits is expected, which in some cases can cause what appear to be random failures. Use the correct macro. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14packet: restore packet statistics tp_packets to include dropsWillem de Bruijn
[ Upstream commit 8bcdeaff5ed544704a9a691d4aef0adb3f9c5b8f ] getsockopt PACKET_STATISTICS returns tp_packets + tp_drops. Commit ee80fbf301 ("packet: account statistics only in tpacket_stats_u") cleaned up the getsockopt PACKET_STATISTICS code. This also changed semantics. Historically, tp_packets included tp_drops on return. The commit removed the line that adds tp_drops into tp_packets. This patch reinstates the old semantics. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: set timestamps for restored skb-sAndrey Vagin
[ Upstream commit 7ed5c5ae96d23da22de95e1c7a239537acd378b1 ] When the repair mode is turned off, the write queue seqs are updated so that the whole queue is considered to be 'already sent. The "when" field must be set for such skb. It's used in tcp_rearm_rto for example. If the "when" field isn't set, the retransmit timeout can be calculated incorrectly and a tcp connected can stop for two minutes (TCP_RTO_MAX). Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: drop packets with multiple fragmentation headersHannes Frederic Sowa
[ Upstream commit f46078cfcd77fa5165bf849f5e568a7ac5fa569c ] It is not allowed for an ipv6 packet to contain multiple fragmentation headers. So discard packets which were already reassembled by fragmentation logic and send back a parameter problem icmp. The updates for RFC 6980 will come in later, I have to do a bit more research here. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: remove max_addresses check from ipv6_create_tempaddrHannes Frederic Sowa
[ Upstream commit 4b08a8f1bd8cb4541c93ec170027b4d0782dab52 ] Because of the max_addresses check attackers were able to disable privacy extensions on an interface by creating enough autoconfigured addresses: <http://seclists.org/oss-sec/2012/q4/292> But the check is not actually needed: max_addresses protects the kernel to install too many ipv6 addresses on an interface and guards addrconf_prefix_rcv to install further addresses as soon as this limit is reached. We only generate temporary addresses in direct response of a new address showing up. As soon as we filled up the maximum number of addresses of an interface, we stop installing more addresses and thus also stop generating more temp addresses. Even if the attacker tries to generate a lot of temporary addresses by announcing a prefix and removing it again (lifetime == 0) we won't install more temp addresses, because the temporary addresses do count to the maximum number of addresses, thus we would stop installing new autoconfigured addresses when the limit is reached. This patch fixes CVE-2013-0343 (but other layer-2 attacks are still possible). Thanks to Ding Tianhong to bring this topic up again. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Ding Tianhong <dingtianhong@huawei.com> Cc: George Kargiotakis <kargig@void.gr> Cc: P J P <ppandit@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14rtnetlink: rtnl_bridge_getlink: Call nlmsg_find_attr() with ifinfomsg headerAsbjoern Sloth Toennesen
[ Upstream commit 3e805ad288c524bb65aad3f1e004402223d3d504 ] Fix the iproute2 command `bridge vlan show`, after switching from rtgenmsg to ifinfomsg. Let's start with a little history: Feb 20: Vlad Yasevich got his VLAN-aware bridge patchset included in the 3.9 merge window. In the kernel commit 6cbdceeb, he added attribute support to bridge GETLINK requests sent with rtgenmsg. Mar 6th: Vlad got this iproute2 reference implementation of the bridge vlan netlink interface accepted (iproute2 9eff0e5c) Apr 25th: iproute2 switched from using rtgenmsg to ifinfomsg (63338dca) http://patchwork.ozlabs.org/patch/239602/ http://marc.info/?t=136680900700007 Apr 28th: Linus released 3.9 Apr 30th: Stephen released iproute2 3.9.0 The `bridge vlan show` command haven't been working since the switch to ifinfomsg, or in a released version of iproute2. Since the kernel side only supports rtgenmsg, which iproute2 switched away from just prior to the iproute2 3.9.0 release. I haven't been able to find any documentation, about neither rtgenmsg nor ifinfomsg, and in which situation to use which, but kernel commit 88c5b5ce seams to suggest that ifinfomsg should be used. Fixing this in kernel will break compatibility, but I doubt that anybody have been using it due to this bug in the user space reference implementation, at least not without noticing this bug. That said the functionality is still fully functional in 3.9, when reversing iproute2 commit 63338dca. This could also be fixed in iproute2, but thats an ugly patch that would reintroduce rtgenmsg in iproute2, and from searching in netdev it seams like rtgenmsg usage is discouraged. I'm assuming that the only reason that Vlad implemented the kernel side to use rtgenmsg, was because iproute2 was using it at the time. Signed-off-by: Asbjoern Sloth Toennesen <ast@fiberby.net> Reviewed-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ip_tunnel: Do not use inner ip-header-id for tunnel ip-header-id.Pravin B Shelar
[ Upstream commit 4221f40513233fa8edeef7fc82e44163fde03b9b ] Using inner-id for tunnel id is not safe in some rare cases. E.g. packets coming from multiple sources entering same tunnel can have same id. Therefore on tunnel packet receive we could have packets from two different stream but with same source and dst IP with same ip-id which could confuse ip packet reassembly. Following patch reverts optimization from commit 490ab08127 (IP_GRE: Fix IP-Identification.) Signed-off-by: Pravin B Shelar <pshelar@nicira.com> CC: Jarno Rajahalme <jrajahalme@nicira.com> CC: Ansis Atteka <aatteka@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14genl: Hold reference on correct module while netlink-dump.Pravin B Shelar
[ Upstream commit 33c6b1f6b154894321f5734e50c66621e9134e7e ] netlink dump operations take module as parameter to hold reference for entire netlink dump duration. Currently it holds ref only on genl module which is not correct when we use ops registered to genl from another module. Following patch adds module pointer to genl_ops so that netlink can hold ref count on it. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> CC: Jesse Gross <jesse@nicira.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14genl: Fix genl dumpit() locking.Pravin B Shelar
[ Upstream commit 9b96309c5b0b9e466773c07a5bc8b7b68fcf010a ] In case of genl-family with parallel ops off, dumpif() callback is expected to run under genl_lock, But commit def3117493eafd9df (genl: Allow concurrent genl callbacks.) changed this behaviour where only first dumpit() op was called under genl-lock. For subsequent dump, only nlk->cb_lock was taken. Following patch fixes it by defining locked dumpit() and done() callback which takes care of genl-locking. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> CC: Jesse Gross <jesse@nicira.com> CC: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14rtnetlink: Fix inverted check in ndo_dflt_fdb_del()Sridhar Samudrala
[ Upstream commit 645359930231d5e78fd3296a38b98c1a658a7ade ] Fix inverted check when deleting an fdb entry. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ip_gre: fix ipgre_header to return correct offset MIME-Version: 1.0Timo Teräs
[ Upstream commit 77a482bdb2e68d13fae87541b341905ba70d572b ] Fix ipgre_header() (header_ops->create) to return the correct amount of bytes pushed. Most callers of dev_hard_header() seem to care only if it was success, but af_packet.c uses it as offset to the skb to copy from userspace only once. In practice this fixes packet socket sendto()/sendmsg() to gre tunnels. Regression introduced in c54419321455631079c7d6e60bc732dd0c5914c5 ("GRE: Refactor GRE tunneling code.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14ipv6: don't stop backtracking in fib6_lookup_1 if subtree does not matchHannes Frederic Sowa
[ Upstream commit 3e3be275851bc6fc90bfdcd732cd95563acd982b ] In case a subtree did not match we currently stop backtracking and return NULL (root table from fib_lookup). This could yield in invalid routing table lookups when using subtrees. Instead continue to backtrack until a valid subtree or node is found and return this match. Also remove unneeded NULL check. Reported-by: Teco Boot <teco@inf-net.nl> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David Lamparter <equinox@diac24.net> Cc: <boutier@pps.univ-paris-diderot.fr> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix bug in bictcp_acked()Eric Dumazet
[ Upstream commit cd6b423afd3c08b27e1fed52db828ade0addbc6b ] While investigating about strange increase of retransmit rates on hosts ~24 days after boot, Van found hystart was disabled if ca->epoch_start was 0, as following condition is true when tcp_time_stamp high order bit is set. (s32)(tcp_time_stamp - ca->epoch_start) < HZ Quoting Van : At initialization & after every loss ca->epoch_start is set to zero so I believe that the above line will turn off hystart as soon as the 2^31 bit is set in tcp_time_stamp & hystart will stay off for 24 days. I think we've observed that cubic's restart is too aggressive without hystart so this might account for the higher drop rate we observe. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14tcp: cubic: fix overflow error in bictcp_update()Eric Dumazet
[ Upstream commit 2ed0edf9090bf4afa2c6fc4f38575a85a80d4b20 ] commit 17a6e9f1aa9 ("tcp_cubic: fix clock dependency") added an overflow error in bictcp_update() in following code : /* change the unit from HZ to bictcp_HZ */ t = ((tcp_time_stamp + msecs_to_jiffies(ca->delay_min>>3) - ca->epoch_start) << BICTCP_HZ) / HZ; Because msecs_to_jiffies() being unsigned long, compiler does implicit type promotion. We really want to constrain (tcp_time_stamp - ca->epoch_start) to a signed 32bit value, or else 't' has unexpected high values. This bugs triggers an increase of retransmit rates ~24 days after boot [1], as the high order bit of tcp_time_stamp flips. [1] for hosts with HZ=1000 Big thanks to Van Jacobson for spotting this problem. Diagnosed-by: Van Jacobson <vanj@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14bridge: don't try to update timers in case of broken MLD queriesLinus Lüssing
[ Upstream commit 248ba8ec05a2c3b118c2224e57eb10c128176ab1 ] Currently we are reading an uninitialized value for the max_delay variable when snooping an MLD query message of invalid length and would update our timers with that. Fixing this by simply ignoring such broken MLD queries (just like we do for IGMP already). This is a regression introduced by: "bridge: disable snooping if there is no querier" (b00589af3b04) Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14fib_trie: remove potential out of bound accessEric Dumazet
[ Upstream commit aab515d7c32a34300312416c50314e755ea6f765 ] AddressSanitizer [1] dynamic checker pointed a potential out of bound access in leaf_walk_rcu() We could allocate one more slot in tnode_new() to leave the prefetch() in-place but it looks not worth the pain. Bug added in commit 82cfbb008572b ("[IPV4] fib_trie: iterator recode") [1] : https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14neighbour: populate neigh_parms on alloc before calling ndo_neigh_setupVeaceslav Falico
[ Upstream commit 63134803a6369dcf7dddf7f0d5e37b9566b308d2 ] dev->ndo_neigh_setup() might need some of the values of neigh_parms, so populate them before calling it. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: check net.core.somaxconn sysctl valuesRoman Gushchin
[ Upstream commit 5f671d6b4ec3e6d66c2a868738af2cdea09e7509 ] It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Reported-by: Changli Gao <xiaosuo@gmail.com> Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing failsDaniel Borkmann
[ Upstream commit 446266b0c742a2c9ee8f0dce759a0117bce58a86 ] Commit 5c766d642 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-14htb: fix sign extension bugstephen hemminger
[ Upstream commit cbd375567f7e4811b1c721f75ec519828ac6583f ] When userspace passes a large priority value the assignment of the unsigned value hopt->prio to signed int cl->prio causes cl->prio to become negative and the comparison is with TC_HTB_NUMPRIO is always false. The result is that HTB crashes by referencing outside the array when processing packets. With this patch the large value wraps around like other values outside the normal range. See: https://bugzilla.kernel.org/show_bug.cgi?id=60669 Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau
commit 2dfca312a91631311c1cf7c090246cc8103de038 upstream. brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07mac80211: add missing channel context releaseJohannes Berg
commit 2a3ba63c235fdcd37f6451bdf4a0c7865a3930cf upstream. IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-07SUNRPC: Fix memory corruption issue on 32-bit highmem systemsTrond Myklebust
commit 347e2233b7667e336d9f671f1a52dfa3f0416e2c upstream. Some architectures, such as ARM-32 do not return the same base address when you call kmap_atomic() twice on the same page. This causes problems for the memmove() call in the XDR helper routine "_shift_data_right_pages()", since it defeats the detection of overlapping memory ranges, and has been seen to corrupt memory. The fix is to distinguish between the case where we're doing an inter-page copy or not. In the former case of we know that the memory ranges cannot possibly overlap, so we can additionally micro-optimise by replacing memmove() with memcpy(). Reported-by: Mark Young <MYoung@nvidia.com> Reported-by: Matt Craighead <mcraighead@nvidia.com> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Tested-by: Matt Craighead <mcraighead@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29NFC: llcp: Fix non blocking sockets connectionsSamuel Ortiz
commit b4011239a08e7e6c2c6e970dfa9e8ecb73139261 upstream. Without the new LLCP_CONNECTING state, non blocking sockets will be woken up with a POLLHUP right after calling connect() because their state is stuck at LLCP_CLOSED. That prevents userspace from implementing any proper non blocking socket based NFC p2p client. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-29mac80211: don't wait for TX status foreverJohannes Berg
commit cb236d2d713cff83d024a82b836757d9e2b50715 upstream. TX status notification can get lost, or the frames could get stuck on the queue, so don't wait for the callback from the driver forever and instead time out after half a second. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20Revert "genetlink: fix family dump race"Greg Kroah-Hartman
This reverts commit aab4f8d490ef8c184d854d5f630438c10406765c, commit 58ad436fcf49810aa006016107f494c9ac9013db upstream, as it causes problems. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20nl80211: fix another nl80211_fam.attrbuf raceJohannes Berg
commit c319d50bfcf678c2857038276d9fab3c6646f3bf upstream. This is similar to the race Linus had reported, but in this case it's an older bug: nl80211_prepare_wdev_dump() uses the wiphy index in cb->args[0] as it is and thus parses the message over and over again instead of just once because 0 is the first valid wiphy index. Similar code in nl80211_testmode_dump() correctly offsets the wiphy_index by 1, do that here as well. Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20cfg80211: fix P2P GO interface teardownJohannes Berg
commit 74418edec915d0f446debebde08d170c7b8ba0ee upstream. When a P2P GO interface goes down, cfg80211 doesn't properly tear it down, leading to warnings later. Add the GO interface type to the enumeration to tear it down like AP interfaces. Otherwise, we leave it pending and mac80211's state can get very confused, leading to warnings later. Reported-by: Ilan Peer <ilan.peer@intel.com> Tested-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20genetlink: fix family dump raceJohannes Berg
commit 58ad436fcf49810aa006016107f494c9ac9013db upstream. When dumping generic netlink families, only the first dump call is locked with genl_lock(), which protects the list of families, and thus subsequent calls can access the data without locking, racing against family addition/removal. This can cause a crash. Fix it - the locking needs to be conditional because the first time around it's already locked. A similar bug was reported to me on an old kernel (3.4.47) but the exact scenario that happened there is no longer possible, on those kernels the first round wasn't locked either. Looking at the current code I found the race described above, which had also existed on the old kernel. Reported-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-20mac80211: continue using disabled channels while connectedJohannes Berg
commit ddfe49b42d8ad4bfdf92d63d4a74f162660d878d upstream. In case the AP has different regulatory information than we do, it can happen that we connect to an AP based on e.g. the world roaming regulatory data, and then update our database with the AP's country information disables the channel the AP is using. If this happens on an HT AP, the bandwidth tracking code will hit the WARN_ON() and disconnect. Since that's not very useful, ignore the channel-disable flag in bandwidth tracking. Reported-by: Chris Wright <chrisw@sous-sol.org> Tested-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-05 02:01:12 +0000