summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2016-05-13udp: Resolve NULL pointer dereference over flow-based vxlan deviceAlexander Duyck
While testing an OpenStack configuration using VXLANs I saw the following call trace: RIP: 0010:[<ffffffff815fad49>] udp4_lib_lookup_skb+0x49/0x80 RSP: 0018:ffff88103867bc50 EFLAGS: 00010286 RAX: ffff88103269bf00 RBX: ffff88103269bf00 RCX: 00000000ffffffff RDX: 0000000000004300 RSI: 0000000000000000 RDI: ffff880f2932e780 RBP: ffff88103867bc60 R08: 0000000000000000 R09: 000000009001a8c0 R10: 0000000000004400 R11: ffffffff81333a58 R12: ffff880f2932e794 R13: 0000000000000014 R14: 0000000000000014 R15: ffffe8efbfd89ca0 FS: 0000000000000000(0000) GS:ffff88103fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000488 CR3: 0000000001c06000 CR4: 00000000001426e0 Stack: ffffffff81576515 ffffffff815733c0 ffff88103867bc98 ffffffff815fcc17 ffff88103269bf00 ffffe8efbfd89ca0 0000000000000014 0000000000000080 ffffe8efbfd89ca0 ffff88103867bcc8 ffffffff815fcf8b ffff880f2932e794 Call Trace: [<ffffffff81576515>] ? skb_checksum+0x35/0x50 [<ffffffff815733c0>] ? skb_push+0x40/0x40 [<ffffffff815fcc17>] udp_gro_receive+0x57/0x130 [<ffffffff815fcf8b>] udp4_gro_receive+0x10b/0x2c0 [<ffffffff81605863>] inet_gro_receive+0x1d3/0x270 [<ffffffff81589e59>] dev_gro_receive+0x269/0x3b0 [<ffffffff8158a1b8>] napi_gro_receive+0x38/0x120 [<ffffffffa0871297>] gro_cell_poll+0x57/0x80 [vxlan] [<ffffffff815899d0>] net_rx_action+0x160/0x380 [<ffffffff816965c7>] __do_softirq+0xd7/0x2c5 [<ffffffff8107d969>] run_ksoftirqd+0x29/0x50 [<ffffffff8109a50f>] smpboot_thread_fn+0x10f/0x160 [<ffffffff8109a400>] ? sort_range+0x30/0x30 [<ffffffff81096da8>] kthread+0xd8/0xf0 [<ffffffff81693c82>] ret_from_fork+0x22/0x40 [<ffffffff81096cd0>] ? kthread_park+0x60/0x60 The following trace is seen when receiving a DHCP request over a flow-based VXLAN tunnel. I believe this is caused by the metadata dst having a NULL dev value and as a result dev_net(dev) is causing a NULL pointer dereference. To resolve this I am replacing the check for skb_dst(skb)->dev with just skb->dev. This makes sense as the callers of this function are usually in the receive path and as such skb->dev should always be populated. In addition other functions in the area where these are called are already using dev_net(skb->dev) to determine the namespace the UDP packet belongs in. Fixes: 63058308cd55 ("udp: Add udp6_lib_lookup_skb and udp4_lib_lookup_skb") Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13sunrpc: set SOCK_FASYNCEric Dumazet
sunrpc is using SOCKWQ_ASYNC_NOSPACE without setting SOCK_FASYNC, so the recent optimizations done in sk_set_bit() and sk_clear_bit() broke it. There is still the risk that a subsequent sock_fasync() call would clear SOCK_FASYNC, but sunrpc does not use this yet. Fixes: 9317bb69824e ("net: SOCKWQ_ASYNC_NOSPACE optimizations") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Jiri Pirko <jiri@resnulli.us> Reported-by: Huang, Ying <ying.huang@intel.com> Tested-by: Jiri Pirko <jiri@resnulli.us> Tested-by: Huang, Ying <ying.huang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12tipc: eliminate risk of double link_up eventsJon Paul Maloy
When an ACTIVATE or data packet is received in a link in state ESTABLISHING, the link does not immediately change state to ESTABLISHED, but does instead return a LINK_UP event to the caller, which will execute the state change in a different lock context. This non-atomic approach incurs a low risk that we may have two LINK_UP events pending simultaneously for the same link, resulting in the final part of the setup procedure being executed twice. The only potential harm caused by this it that we may see two LINK_UP events issued to subsribers of the topology server, something that may cause confusion. This commit eliminates this risk by checking if the link is already up before proceeding with the second half of the setup. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12gre: Fix wrong tpi->proto in WCCPHaishuang Yan
When dealing with WCCP in gre6 tunnel, it sets the wrong tpi->protocol, that is, ETH_P_IP instead of ETH_P_IPV6 for the encapuslated traffic. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12ip6_gre: Fix get_size calculation for gre6 tunnelHaishuang Yan
Do not include attribute IFLA_GRE_TOS. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12Merge tag 'mac80211-next-for-davem-2016-05-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Some more work for 4.7, notably: * completion and fixups of nla_put_64_64bit() work * remove a/b/g/n from wext nickname to avoid confusion with 11ac (which wouldn't even fit fully there due to string length restrictions) along with some other minor changes/cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-12mac80211: allow software PS-Poll/U-APSD with AP_LINK_PSJohannes Berg
When using RSS, frames might not be processed in the correct order, and thus AP_LINK_PS must be used; most likely with firmware keeping track of the powersave state, this is the case in iwlwifi now. In this case, the driver can use ieee80211_sta_ps_transition() to still have mac80211 manage powersave buffering. However, for U-APSD and PS-Poll this isn't sufficient. If the device can't manage that entirely on its own, mac80211's code should be used. To allow this, export two functions: ieee80211_sta_uapsd_trigger() and ieee80211_sta_pspoll(). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: make wdev_list accessible to driversJohannes Berg
There's no harm in having drivers read the list, since they can use RCU protection or RTNL locking; allow this to not require each and every driver to also implement its own bookkeeping. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: remove erroneous commentJohannes Berg
The devlist_mtx mutex was removed about two years ago, in favour of just using RTNL/RCU protection. Remove the comment still referencing it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12cfg80211: allow finding vendor with OUI without specifying the OUI typeEmmanuel Grumbach
This allows finding vendor IE from a specific vendor. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: allow same PN for AMSDU sub-framesSara Sharon
Some hardware (iwlwifi an example) de-aggregate AMSDUs and copy the IV as is to the generated MPDUs, so the same PN appears in multiple packets without being a replay attack. Allow driver to explicitly indicate that a frame is allowed to have the same PN as the previous frame. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-12mac80211: remove disconnected APs from BSS tableDavid Spinadel
In some cases, after a sudden AP disappearing and reconnection to another AP in the same ESS, user space gets the old AP in scan results (cached). User space may decide to roam to that old AP which will cause a disconnection and longer recovery. Remove APs that are probably out of range from BSS table. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-11Merge tag 'nfc-next-4.7-1' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.7 pull request This is the first NFC pull request for 4.7. With this one we mainly have: - Support for NXP's pn532 NFC chipset. The pn532 is based on the same microcontroller as the pn533, but it talks to the host through i2c instead of USB. By separating the pn533 driver into core and PHY parts, we can not add the i2c layer and support the pn532 chipset. - Support for NCI's loopback mode. This is a testing mode where each packet received by the NFCC is sent back to the DH, allowing the host to test that the controller can receive and send data. - A few ACPI related fixes for the STMicro drivers, in order to match the device tree naming scheme. - A bunch of cleanups for the st-nci and the st21nfca STMicro drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Rename switch chip data to cdAndrew Lunn
The dsa_switch structure contains a dsa_chip_data member called pd. However in the rest of the code, pd is used for dsa_platform_data. This is confusing. Rename it cd, which is already often used in dsa.c and slave.c for this data type. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Remove master_dev from switch structureAndrew Lunn
The switch drivers only use the master_dev member for dev_info() messages. Now that the device is passed to the old style probe, and new style drivers are probed as true linux drivers, this is no longer needed. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11dsa: Move gpio reset into switch driverAndrew Lunn
Resetting the switch is something the driver does, not the framework. So move the parsing of this property into the driver. There are no in kernel users of this property, so moving it does not break anything. There is however a board which will make use of this property making its way into the kernel. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: original ingress device index in PKTINFODavid Ahern
Applications such as OSPF and BFD need the original ingress device not the VRF device; the latter can be derived from the former. To that end add the skb_iif to inet_skb_parm and set it in ipv4 code after clearing the skb control buffer similar to IPv6. From there the pktinfo can just pull it from cb with the PKTINFO_SKB_CB cast. The previous patch moving the skb->dev change to L3 means nothing else is needed for IPv6; it just works. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11net: l3mdev: Add hook in ip and ipv6David Ahern
Currently the VRF driver uses the rx_handler to switch the skb device to the VRF device. Switching the dev prior to the ip / ipv6 layer means the VRF driver has to duplicate IP/IPv6 processing which adds overhead and makes features such as retaining the ingress device index more complicated than necessary. This patch moves the hook to the L3 layer just after the first NF_HOOK for PRE_ROUTING. This location makes exposing the original ingress device trivial (next patch) and allows adding other NF_HOOKs to the VRF driver in the future. dev_queue_xmit_nit is exported so that the VRF driver can cycle the skb with the switched device through the packet taps to maintain current behavior (tcpdump can be used on either the vrf device or the enslaved devices). Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11ipv6: fix 4in6 tunnel receive pathNicolas Dichtel
Protocol for 4in6 tunnel is IPPROTO_IPIP. This was wrongly changed by the last cleanup. CC: Tom Herbert <tom@herbertland.com> Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-11tcp: replace cnt & rtt with struct in pkts_acked()Lawrence Brakmo
Replace 2 arguments (cnt and rtt) in the congestion control modules' pkts_acked() function with a struct. This will allow adding more information without having to modify existing congestion control modules (tcp_nv in particular needs bytes in flight when packet was sent). As proposed by Neal Cardwell in his comments to the tcp_nv patch. Signed-off-by: Lawrence Brakmo <brakmo@fb.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Antonio Quartulli says: ==================== Included changes: - remove useless skb size check in batadv_interface_rx - basic netns support introduced by Andrew Lunn: - prevent virtual interface from changing netns by setting NETIF_F_NETNS_LOCAL - create virtual interface within the netns of the first hard-interface - introduce detection of complex bridge loops and report event to the user (via udev) when the Bridge Loop Avoidance mechanism can't prevent them - minor reference counting bugfixes for the hard_iface object that couldn't make it via the net tree - use kref_get() instead of kref_get_unless_zero() to make reference counting bug more visible - use batadv_compare_eth() all over the code when possible instead of plain memcmp() - minor code cleanup and style adjustments ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10skbuff: remove unused variable `doff'Sowmini Varadhan
There are two instances of an unused variable, `doff' added by commit 6fa01ccd8830 ("skbuff: Add pskb_extract() helper function") in pskb_carve_inside_header() and pskb_carve_inside_nonlinear(). Remove these instances, they are not used. Reported by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ila: ipv6/ila: fix nlsize calculation for lwtunnelTom Herbert
The handler 'ila_fill_encap_info' adds two attributes: ILA_ATTR_LOCATOR and ILA_ATTR_CSUM_MODE. nla_total_size_64bit() must be use for ILA_ATTR_LOCATOR. Also, do nla_put_u8 instead of nla_put_u64 for ILA_ATTR_CSUM_MODE. Fixes: f13a82d87b21 ("ipv6: use nla_put_u64_64bit()") Fixes: 90bfe662db13 ("ila: add checksum neutral ILA translations") Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10batman-adv: use batadv_compare_eth when possibleAntonio Quartulli
When comparing Ethernet address it is better to use the more generic batadv_compare_eth. The latter is also optimised for architectures having a fast unaligned access. Signed-off-by: Antonio Quartulli <a@unstable.cc> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-05-10batman-adv: replace ethertype variable with ETH_P_BATMAN for readabilityMarek Lindner
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use bool as return type for boolean functionsSven Eckelmann
It is easier to understand that the returned value of a specific function doesn't have to be 0 when the functions was successful when the actual return type is bool. This is especially true when all surrounding functions with return type int use negative values to return the error code. Reported-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for _batadv_update_routeSven Eckelmann
_batadv_update_route requires that the caller already has a valid reference for neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for hard_iface subfunctionsSven Eckelmann
The callers of the functions using batadv_hard_iface objects already make sure that they hold a valid reference. The subfunctions don't have to check whether the reference counter is > 0 because this was checked by the callers. The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_node_addSven Eckelmann
batadv_gw_node_add requires that the caller already has a valid reference for orig_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_gw_selectSven Eckelmann
batadv_gw_select requires that the caller already has a valid reference for new_gw_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_nc_get_nc_nodeSven Eckelmann
batadv_nc_get_nc_node requires that the caller already has a valid reference for orig_neigh_node. It is therefore not possible that it has an reference counter of 0 and was still given to this function The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Use kref_get for batadv_tvlv_container_getSven Eckelmann
batadv_tvlv_container_get requires that tvlv.container_list_lock is held by the caller. It is therefore not possible that an item in tvlv.container_list has an reference counter of 0 and is still in the list The kref_get function instead WARNs (with debug information) when the reference counter would still be 0. This makes a bug in batman-adv better visible because kref_get_unless_zero would have ignored this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Increase hard_iface refcnt for ptypeSven Eckelmann
The hard_iface is referenced in the packet_type for batman-adv. Increase the refcounter of the hard_interface for it to have an explicit reference for it in case this functionality gets refactorted and the currently used implicit reference for it will be removed. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Check hard_iface refcnt when receiving skbSven Eckelmann
The receive function may start processing an incoming packet while the hard_iface is shut down in a different context. All called functions called with the batadv_hard_iface object belonging to the incoming interface would have to check whether the reference counter is still > 0. This is rather error-prone because this check can be forgotten easily. Instead check the reference counter when receiving the object to make sure that all called functions have a valid reference. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Check hard_iface refcnt before calling functionSven Eckelmann
The batadv_hardif_list list is checked in many situations and the items in this list are given to specialized functions to modify the routing behavior. At the moment each of these called functions has to check itself whether the received batadv_hard_iface has a refcount > 0 before it can increase the reference counter and use it in other objects. This can easily lead to problems because it is not easily visible where all callers of a function got the batadv_hard_iface object from and whether they already hold a valid reference. Checking the reference counter directly before calling a subfunction with a pointer from the batadv_hardif_list avoids this problem. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: add detection for complex bridge loopsSimon Wunderlich
There are network setups where the current bridge loop avoidance can't detect bridge loops. The minimal setup affected would consist of two LANs and two separate meshes, connected in a ring like that: A...(mesh1)...B | | (LAN1) (LAN2) | | C...(mesh2)...D Since both the meshes and backbones are separate, the bridge loop avoidance has not enough information to detect and avoid the loop in this case. Even if these scenarios can't be fixed easily, these kind of loops can be detected. This patch implements a periodic check (running every 60 seconds for now) which sends a broadcast frame with a random MAC address on each backbone VLAN. If a broadcast frame with the same MAC address is received shortly after on the mesh, we know that there must be a loop and report that incident as well as throw an uevent to let others handle that problem. Signed-off-by: Simon Wunderlich <simon.wunderlich@open-mesh.com> [sven@narfation.org: fix conflicts with current version] Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Create batman soft interfaces within correct netns.Andrew Lunn
When creating a soft interface, create it in the same netns as the hard interface. Replace all references to init_net with the correct name space for the interface being manipulated. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: NETIF_F_NETNS_LOCAL feature to prevent netns movesAndrew Lunn
The batX soft interface should not be moved between network name spaces. This is similar to bridges, bonds, tunnels, which are not allowed to move between network namespaces. Suggested-by: Daniel Ehlers <danielehlers@mindeye.net> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove hdr_size skb size check in batadv_interface_rxSven Eckelmann
The callers of batadv_interface_rx have to make sure that enough data can be pulled from the skb when they read the batman-adv header. The only two functions using it are either calling pskb_may_pull with hdr_size directly (batadv_recv_bcast_packet) or indirectly via batadv_check_unicast_packet (batadv_recv_unicast_packet). Reported-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10batman-adv: Remove unused parameter recv_if of batadv_interface_rxSven Eckelmann
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-10netfilter: conntrack: remove uninitialized shadow variableArnd Bergmann
A recent commit introduced an unconditional use of an uninitialized variable, as reported in this gcc warning: net/netfilter/nf_conntrack_core.c: In function '__nf_conntrack_confirm': net/netfilter/nf_conntrack_core.c:632:33: error: 'ctinfo' may be used uninitialized in this function [-Werror=maybe-uninitialized] bytes = atomic64_read(&counter[CTINFO2DIR(ctinfo)].bytes); ^ net/netfilter/nf_conntrack_core.c:628:26: note: 'ctinfo' was declared here enum ip_conntrack_info ctinfo; The problem is that a local variable shadows the function parameter. This removes the local variable, which looks like what Pablo originally intended. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 71d8c47fc653 ("netfilter: conntrack: introduce clash resolution on insertion race") Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Use correct flags for reading TUNNEL_SEQTom Herbert
Fix two spots where o_flags in a tunnel are being compared to GRE_SEQ instead of TUNNEL_SEQ. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6: Don't set transport header in IPv6 tunnelingTom Herbert
We only need to reset network header here. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Set inner protocol correctly in __gre6_xmitTom Herbert
Need to use adjusted protocol value for setting inner protocol. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10gre6: Fix flag translationsTom Herbert
GRE for IPv6 does not properly translate for GRE flags to tunnel flags and vice versa. This patch fixes that. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10ip6_gre: Fix MTU settingTom Herbert
In ip6gre_tnl_link_config set t->tun_len and t->hlen correctly for the configuration. For hard_header_len and mtu calculation include IPv6 header and encapsulation overhead. In ip6gre_tunnel_init_common set t->tun_len and t->hlen correctly for the configuration. Revert to setting hard_header_len instead of needed_headroom. Tested: ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 Gives MTU of 1434. That is equal to 1500 - 40 - 14 - 4 - 8. ./ip link add name tun8 type ip6gretap remote \ 2401:db00:20:911a:face:0:27:0 local \ 2401:db00:20:911a:face:0:25:0 ttl 225 okey 123 Gives MTU of 1430. That is equal to 1500 - 40 - 14 - 4 - 8 - 4. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: l3mdev: Allow send on enslaved interfaceDavid Ahern
Allow udp and raw sockets to send by oif that is an enslaved interface versus the l3mdev/VRF device. For example, this allows BFD to use ifindex from IP_PKTINFO on a receive to send a response without the need to convert to the VRF index. It also allows ping and ping6 to work when specifying an enslaved interface (e.g., ping -I swp1 <ip>) which is a natural use case. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09net: l3mdev: Move get_saddr and rt6_dstDavid Ahern
Move l3mdev_rt6_dst_by_oif and l3mdev_get_saddr to l3mdev.c. Collapse l3mdev_get_rt6_dst into l3mdev_rt6_dst_by_oif since it is the only user and keep the l3mdev_get_rt6_dst name for consistency with other hooks. A follow-on patch adds more code to these functions making them long for inlined functions. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
In netdevice.h we removed the structure in net-next that is being changes in 'net'. In macsec.c and rtnetlink.c we have overlaps between fixes in 'net' and the u64 attribute changes in 'net-next'. The mlx5 conflicts have to do with vxlan support dependencies. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following large patchset contains Netfilter updates for your net-next tree. My initial intention was to send you this in two goes but when I looked back twice I already had this burden on top of me. Several updates for IPVS from Marco Angaroni: 1) Allow SIP connections originating from real-servers to be load balanced by the SIP persistence engine as is already implemented in the other direction. 2) Release connections immediately for One-packet-scheduling (OPS) in IPVS, instead of making it via timer and rcu callback. 3) Skip deleting conntracks for each one packet in OPS, and don't call nf_conntrack_alter_reply() since no reply is expected. 4) Enable drop on exhaustion for OPS + SIP persistence. Miscelaneous conntrack updates from Florian Westphal, including fix for hash resize: 5) Move conntrack generation counter out of conntrack pernet structure since this is only used by the init_ns to allow hash resizing. 6) Use get_random_once() from packet path to collect hash random seed instead of our compound. 7) Don't disable BH from ____nf_conntrack_find() for statistics, use NF_CT_STAT_INC_ATOMIC() instead. 8) Fix lookup race during conntrack hash resizing. 9) Introduce clash resolution on conntrack insertion for connectionless protocol. Then, Florian's netns rework to get rid of per-netns conntrack table, thus we use one single table for them all. There was consensus on this change during the NFWS 2015 and, on top of that, it has recently been pointed as a source of multiple problems from unpriviledged netns: 11) Use a single conntrack hashtable for all namespaces. Include netns in object comparisons and make it part of the hash calculation. Adapt early_drop() to consider netns. 12) Use single expectation and NAT hashtable for all namespaces. 13) Use a single slab cache for all namespaces for conntrack objects. 14) Skip full table scanning from nf_ct_iterate_cleanup() if the pernet conntrack counter tells us the table is empty (ie. equals zero). Fixes for nf_tables interval set element handling, support to set conntrack connlabels and allow set names up to 32 bytes. 15) Parse element flags from element deletion path and pass it up to the backend set implementation. 16) Allow adjacent intervals in the rbtree set type for dynamic interval updates. 17) Add support to set connlabel from nf_tables, from Florian Westphal. 18) Allow set names up to 32 bytes in nf_tables. Several x_tables fixes and updates: 19) Fix incorrect use of IS_ERR_VALUE() in x_tables, original patch from Andrzej Hajda. And finally, miscelaneous netfilter updates such as: 20) Disable automatic helper assignment by default. Note this proc knob was introduced by a9006892643a ("netfilter: nf_ct_helper: allow to disable automatic helper assignment") 4 years ago to start moving towards explicit conntrack helper configuration via iptables CT target. 21) Get rid of obsolete and inconsistent debugging instrumentation in x_tables. 22) Remove unnecessary check for null after ip6_route_output(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-03 12:49:42 +0000